vmax led-v15 v3 13 2012 - projectors, projector reviews, · pdf file ·...
TRANSCRIPT
2 3.11.12-‐jc www.VMAXProjectors.com | [email protected]
Here’s what included:
LED-‐V15 Projector Remote
Power
Cable
AV Cable Computer Cable
Two AAA Batteries
Step 1: Connect the Power Cord to the projector and to an electrical outlet. Step 2: Connect your equipment’s cable to the projector in the proper input Step 3: Turn On the projector and your device Step 3: Select Input Source from either the projector’s Remote or Panel Key to Select the Input Source (default search signal is PC -->AV --> HDMI --> Component)
Quick Connection and Start
What’s in the Box
Computer Input (PC or HDMI cable)
Tip: Use a PC resolution preset to 640 x 480 to match this VGA projector.
RCA, Component or HDMI Input
Tip: Suggest a DVD or Blue-‐Ray player
From other AV devices such as a digital still Camera or Camcorder
RCA, Component or HDMI Input
3 3.11.12-‐jc www.VMAXProjectors.com | [email protected]
WARNINGS: -‐ When turning off the projector, the fans will continue to run for 90 seconds. Before unplugging the
power cable, make sure the fans have stopped in order to avoid damage to the projector lamp.
-‐ Do not stare directly into the light of the lens. The lamp is very bright and can cause permanent damage to your eyes.
-‐ Turn the projector off and unplug power cord before cleaning any part of the projector.
-‐ Do not touch or block the projector lens with any objects as this can damage the projector lens.
Use the lens cap when the projector is not in use and during transport. Scratches, gouges, and other lens damage are not covered by the product warranty.
-‐ Do not open any cover on the projector, except the lamp cover when necessary.
-‐ Do not attempt to service this product yourself as opening and removing covers may expose you to
dangerous voltage and other hazards. Refer all servicing to qualified service personnel.
-‐ Do not place the projector in wet or moist conditions.
Installation Please place this projector on a stable and leveled area.
Ventilation For best results, proper ventilation is required at all times. Keeping the filter clean will prevent the projector from overheating. Rinse the filter on a monthly basis.
CLEANING THE LENS
1. Apply a non-‐abrasive camera lens cleaner to a soft, dry cloth.
-‐ Projector must be off and the lens must be at room temperature -‐ Avoid using an excessive amount of cleaner, and don’t apply the cleaner directly to the lens.
Abrasive cleaners, solvents, or other harsh chemicals might scratch the lens.
2. Lightly wipe the cleaning cloth over the lens in a circular motion
Safety and Maintenance Installation Instructions
4 3.11.12-‐jc www.VMAXProjectors.com | [email protected]
Display
Display Type 3.2" TFT LCD x 1
Support Resolution Native 640x480
Supports up to 1080i
Keystone Correction ±15 degree vertical Suggested Display Size 40" -‐ 100"
Throw Distance 1.5 -‐ 3 M
Throw Ratio N/A
Lamp Type 50W LED Lamp
Lamp Life 20,000 Hours Brightness 150 Lumens
Audio
Audio Speaker 1.5 W x 2
Audio Output Power 1.5 W Sound Output Mode 3.5mm Jack
Port & Connectors
HDMI Inputs 1
DB15 PC VGA Input(s) 1
S-‐Video Inputs 1 Composite A/V Inputs 1
Component Video Inputs 1
Audio Out 1 (3.5mm)
Data Storage Inputs N/A
Power Power Support AC 110-‐240V, 15.A, 50/60Hz
Power Consumption 70W
Sound Emission N/A
Physical Specifications
Product Weight 2.1 lbs Product Size (LxWxH) 10.2" x6.5" x3.1"
Package Contents
Projector 1
Remote Control 1
Cable HDMI, VGA, RCA, Power
LED-V15 Specifications Installation Instructions
5 3.11.12-‐jc www.VMAXProjectors.com | [email protected]
Front View Rear View Bottom View
1. Power Button 6. VGA Port (computer input) 13. Ceiling Mount Holes 2. Indicator Light 7-‐8. Ventilation window Red -‐ standby | Green -‐ working 9. Trapezoid Adjustment Port 3. Focus Lens 10. Interface 4. IR Receiver 11. High-‐feet adjustment 5. N/A 12. Speaker
Signal Connection Instructions
Panel Keys
Inputs
7 3.11.12-‐jc www.VMAXProjectors.com | [email protected]
1. Mute 2. Power On/Off 3. Image Mode (choose from Standard/Theater/Vivid..) 4. Menu (navigate by arrow key and enter by right arrow key) 5. Aspect Ratio (not available in all modes) 6. Exit from menu screen 7. Image flip 8. Display the current video mode 9. Source select 10. OK / Enter when source is selected
Remote Control
Focus Adjustment
8 3.11.12-‐jc www.VMAXProjectors.com | [email protected]
• One (1) Year parts and labor warranty from defects in workmanship from purchase date as
follows (except for refurbished units as specified below). • Refurbished Units carry a 90-‐DAY parts and labor warranty. • Each party will be responsible for one way shipping during the warranty period.
• A RMA (Return Merchandise Authorization) number must be issued in order to process a replacement or to authorize a return for warranty repair. Elite Screens will, at its sole option replace or repair the defective unit with a replacement *(see exceptions below) after the
defective unit or parts have been received. Once the product is received, Elite Screens will send out a replacement *unit to the customer by ground service (subject to inventory availability).
• Do Not Return Any Unauthorized Items, as they will be refused and returned at your expense.
The RMA Number must be included on the outside label of your shipping box. Our warehouse is not authorized to accept returns without an RMA number on the shipping label.
• RMA Numbers are valid for 45 days from the date issued.
• Missing Parts must be reported within 7 days of receipt. If reported after 7 days, the customer will be responsible for shipping and handling fees. If reported after 30 days of receipt, the customer will be responsible for cost of parts and shipping & handling fees.
*A New or refurbished replacement will be send out to the customer depending on the type of purchase (new or refurbished) and based on stock availability.
North America only U.S. and Canada
For Warranty and Service requests, please submit an RMA/Service Form at: www.vmaxprojectors.com/warrantysupportform
Please visit this link for full Warranty information: www.vmaxprojectors.com/warranty
For Customer Service and Technical questions, please contact Elite Screens at: [email protected] [email protected]
REMEMBER TO REGISTER YOUR PRODUCT AT: www.vmaxprojectors.com/register
Warranty Policy