voodoo? dissolvable frac plug · - voodoo? can, if desired, fully dissolve up to 89% faster than...

2
- Voodoo? can, if desired, fully dissolve up to 89% faster than other plugs due to low mass and large exposed surface area. - High performance proprietary coatings available for high-temperature or high acid concentration treatment programs. - As differential pressure increases the seal effectiveness and gripping force increases. - 10,000 psi working differential pressure rating at 325°F. - Large 1.50 inch [38.1 mm] ID offers immediate flowback capability. - Can be set in Q125 and all softer grades of casing. - Can be milled in less than 4 minutes with low WOB (45 second record milling time). - No elastomers and low density materials eliminates milling downtime and lost production due to high density cuttings initiated sand bridges. - Unique element-less design, prevents swabbing initiated pre-sets. - Dissolvable check valve can be ran in place or a ball dropped from surface, with a gun mis-run contingency in place for 'ball-in-place'. - Custom picked dissolvable materials, including fresh-water dissolvables, and acid-delay coatings can be used for your specific well conditions without sacrificing reliability or ratings. Benefits - Unique perf-gun mis-run contingency design allows secondary guns to pumped down when running a 'ball in place'. - Superior dissolvability and flowback performance due to plug length being under 5 inches [127 mm]. - Unprecedented short length results in 90% less material than conventional plugs. - Element free and anti-preset design allows aggressive pump-downs at 1000 ft/min and faster with negligible pre-set risk. - Shear pins integral to WLAK and not left downhole. - Plug length is under 5 inches [127 mm] resulting in up to 500 lbs of less plug mass per wellbore. - Allows wells to be completed past coiled tubing and jointed pipe reach. Voodoo? Dissolvable Performance Benefits Voodoo? Dissolvable Frac Plug Technical Specifications MTS-VDSP-0007 © 2019 8Sigma Energy Services. All rights reserved 2014 - 2020. Patent Pending 1000+ ft/min pump-downs, reliable dissolutions, lower costs Relative Size of 4.500 inch Voodoo? Dissolvable Frac Plug

Upload: others

Post on 27-Oct-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Voodoo? Dissolvable Frac Plug · - Voodoo? can, if desired, fully dissolve up to 89% faster than other plugs due to low mass and large exposed surface area. - High performance proprietary

- Voodoo? can, if desired, fu l ly dissolve up t o 89% fast er t han ot her plugs due t o low m ass and large exposed sur face area.

- High per form ance propr iet ary coat ings available for high-temperature or high acid concentration treatment programs.

- As differential pressure increases the seal effectiveness and gripping force increases.

- 10,000 psi work ing dif ferent ial pressure rat ing at 325°F.- Large 1.50 inch [38.1 mm] ID offers immediate flowback capability. - Can be set in Q125 and all softer grades of casing. - Can be milled in less than 4 minutes with low WOB (45 second record

milling time).- No elastomers and low density materials eliminates milling downtime

and lost production due to high density cuttings initiated sand bridges.- Unique element-less design, prevents swabbing initiated pre-sets.- Dissolvable check valve can be ran in place or a ball dropped from

surface, with a gun mis-run contingency in place for 'ball-in-place'. - Custom picked dissolvable materials, including fresh-water dissolvables,

and acid-delay coatings can be used for your specific well conditions without sacrificing reliability or ratings.

Benefits

- Unique perf-gun mis-run contingency design al lows secondary guns t o pum ped down when running a 'ball in place'.

- Superior dissolvability and flowback performance due to plug length being under 5 inches [127 mm].

- Unprecedented short length results in 90% less material than conventional plugs.

- Elem ent f ree and anti-preset design allows aggressive pum p-downs at 1000 f t /m in and faster with negligible pre-set risk.

- Shear pins integral to WLAK and not left downhole. - Plug lengt h is under 5 inches [127 m m ] result ing in up t o 500 lbs of

less plug m ass per wellbore. - Allows wells to be completed past coiled tubing and jointed pipe reach.

Voodoo? Dissolvable

Performance

Benefits

Voodoo? Dissolvable Frac Plug

Technical Specif icat ions

MTS-VDSP-0007 © 2019 8Sigm a Energy Services. All r ight s reserved 2014 - 2020. Pat ent Pending

1000+ ft/min pump-downs, reliable dissolutions, lower costs

Relat ive Size of 4.500 inch Voodoo? Dissolvable Frac Plug

Page 2: Voodoo? Dissolvable Frac Plug · - Voodoo? can, if desired, fully dissolve up to 89% faster than other plugs due to low mass and large exposed surface area. - High performance proprietary

Call 1-844-4NOCOIL

Email [email protected]

MTS-VDSP-0007 © 2019 8Sigm a Energy Services. All r ight s reserved 2014 - 2020. Pat ent Pending

Voodoo? Dissolvable Frac Plug

Casing Size(in)

Casing Weight

(ppf )

Nom inal Casing ID

(in)

Plug RIH OD (in)

Plug ID (in)

Plug Lengt h

(in)

Work ing Pressure Rat ing (psi)

Max Work ing Tem perat ure

(F)

4.500

11.6 4.000 3.500 1.500 4.500 10,000 325

13.5 3.921 3.500 1.500 4.500 10,000 325

15.1 3.826 3.500 1.500 4.500 10,000 325

5.500

20.0 4.778 4.310 1.500 4.500 10,000 325

23.0 4.669 4.310 1.500 4.500 10,000 325

26.0 4.547 4.310 1.500 4.500 10,000 325

Casing Size

(m m )

Casing Weight (kg/m )

Nom inal Casing ID

(m m )

Plug RIH OD (m m )

Plug ID (m m )

Plug Lengt h (m m )

Work ing Pressure Rat ing (MPa)

Max Work ing

Tem perat ure (C)

114.3

17.26 101.6 88.9 38.1 114.3 68.9 163

20.09 99.6 88.9 38.1 114.3 68.9 163

22.47 97.2 88.9 38.1 114.3 68.9 163

139.7

29.76 121.4 109.5 38.1 114.3 68.9 163

34.23 118.6 109.5 38.1 114.3 68.9 163

38.69 115.5 109.5 38.1 114.3 68.9 163