vpanel trench shoring box patent # 7,611,308 for underground maintenance workers who need to work in...

1
V-Panel Kit TM Flexible | Modular | Aluminum When you need something flexible and lightweight The V-Panel was engineered to be FULLY adjustable - period! Sidewalls are made of 12” wide panels that independently move and clamp in place. Great for working around existing ground utilities. Walers adjust vertically to increase pipe clearance. Detach panels - attach panels - telescope out - make a three sided box with 1 drop ‘on - a four sided box with 2 drop ‘ons... etc. There’s noth- ing the V-Panel can’t do! V-Panel 6’ x 6’ w/ adjustable spreaders - Mfg #562956 / Weighs ~ 641 lbs. 11 p. 330.259.9009 | f. 330.259.9001 | www.kundel.com aluminum knife edge panels compatible with MultiShore ‡ walers compatible with MultiShore, TimberShore, and Water Proofing Kit ‡ ‡ The V-Panel is built with components that are interchangeable with other Safeguard products. Accessory list and other options available on page 18. V-Panels are designed to be vertically adjusted to work around pre-existing lines - just lift panels and lock. The bottom of each panel features a steel knife edge. The top of each panel features a durable pounding pad. Easily push each panel in tough dirt without damag- ing the box. TIP: for jobs needing higher pipe clearance raise & clamp walers ADJ. PANELS Drop ‘ons produce more shield coverage and easily attach to spreaders. For wider applica- tions add panels to the drop ‘on to increase the drop ’ons width. For narrow applications remove panels. Use one drop ‘on for 3 sided coverage, or two drop ‘ons for full protection. DROP ‘ONS TELESCOPING SPREADERS Everything on the V-Panel uses a pinless design (except spreaders). To adjust a single panel, unscrew 2 bolts, reposition and tighten. V-Panel brings you full adjustability while never having to worry about lost pins. PINLESS DESIGN Options include telescoping spreaders for adjustable width -YOU CAN ADD- hydraulic capability and pump out shield to shore up the ditch to achieve greater depths. BENEFITS & FEAT. FULLY MODULAR SYSTEM Break down for compact storage FULLY ADJUSTABLE SYSTEM Up-down, right-left, front-back EXCEEDS OSHA STANDARDS Comprehensive manual w/ tab. data SLIDING-CLAMPING PANELS 12” wide panels vertically adjust STEEL TAMPING PADS Protects panels from excavator damage EASY TRANSPORTATION Simply break down and tie down PATENTED KNIFE EDGE Easily drive individual panels into the ditch.

Upload: elton-cervera

Post on 10-Aug-2015

139 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: VPanel Trench Shoring Box PATENT # 7,611,308 for underground maintenance workers who need to work in and around utility clusters

V-Panel Kit TMFlexible | Modular | Aluminum

When you need something flexible and lightweightThe V-Panel was engineered to be FULLY adjustable - period! Sidewalls are made of 12” wide panels that independently move and clamp in place. Great for working around existing ground utilities. Walers adjust vertically to increase pipe clearance. Detach panels - attach panels - telescope out - make a three sided box with 1 drop ‘on - a four sided box with 2 drop ‘ons... etc. There’s noth-ing the V-Panel can’t do!

V-P

anel

6’ x

6’

w/ a

djus

tabl

e sp

read

ers

- Mfg

#56

2956

/ W

eigh

s ~

641

lbs

.

11 p. 330.259.9009 | f. 330.259.9001 | www.kundel.com

aluminum knife edge panels compatible with MultiShore ‡

walers compatible with MultiShore, TimberShore,and Water Proo�ng Kit ‡

‡ The V-Panel is built with components that are interchangeable with other Safeguard products. Accessory list and other options available on page 18.

V-Panels are designed to be vertically adjusted to work around pre-existing lines - just lift panels and lock. The bottom of each panel features a steel knife edge. The top of each panel features a durable pounding pad. Easily push each panel in tough dirt without damag-ing the box.

TIP: for jobs needing higher pipe clearance raise & clamp walers

ADJ. PANELS

Drop ‘ons produce more shield coverage and easily attach to spreaders. For wider applica-tions add panels to the drop ‘on to increase the drop ’ons width. For narrow applications remove panels. Use one drop ‘on for 3 sided coverage, or two drop ‘ons for full protection.

DROP ‘ONS

TELESCOPING SPREADERS

Everything on the V-Panel uses a pinless design (except spreaders). To adjust a single panel, unscrew 2 bolts, reposition and tighten. V-Panel brings you full adjustability while never having to worry about lost pins.

PINLESS DESIGN

Options include telescoping spreaders for adjustable width -YOU CAN ADD- hydraulic capability and pump out shield to shore up the ditch to achieve greater depths.

BENEFITS & FEAT.FULLY MODULAR SYSTEM Break down for compact storageFULLY ADJUSTABLE SYSTEM Up-down, right-left, front-backEXCEEDS OSHA STANDARDS Comprehensive manual w/ tab. dataSLIDING-CLAMPING PANELS 12” wide panels vertically adjustSTEEL TAMPING PADS Protects panels from excavator damageEASY TRANSPORTATION Simply break down and tie downPATENTED KNIFE EDGE Easily drive individual panels into the ditch.