w world of world of wide ride range of wange of welding...
TRANSCRIPT
PRODUCTS'INFORMATION
ELECTRIC WELDING ACCESSORIES
ELECTRIC WELDING ACCESSORIES
WELDING POWER SOURCESWELDING POWER SOURCES SAFETY PRODUCTSSAFETY PRODUCTS
WELDING CONSUMABLES
WELDING CONSUMABLES
GAS WELDING & CUTTING EQUIPMENTS
GAS WELDING & CUTTING EQUIPMENTS
WELDING, CUTTING & SAFETY PRODUCTSWELDING, CUTTING & SAFETY PRODUCTS
World of Wide Range of Welding ProductsWorld of Wide Range of Welding Products
COMPANY PROFILE
COMPANY PROFILE
Welding is a fabrication process that joins material, usually metals or thermoplastics, by causing coalescence. This is often done by melting the work pieces and adding a filler material to form a pool of molten material (the meld puddle) that cools to become a strong joint, but sometimes pressure is used in conjunction with heat, or by itself, to produce the weld. This is in contrast with soldering and brazing, which involve melting a lower-melting-point material between the work pieces to form a bond between them without melting the work pieces. Many different energy sources can be used for welding including a gas flame, an electric arc, a laser, an electron beam, friction, and ultrasound.
Today welding is used in diverse areas of industry ranging from aircraft and rocket engines to small pipes.
The AWS definition for a welding process is “a material joining process which produces coalescence of materials by heating them to suitable temperatures with or without the application of pressure or by the application of pressure alone and with or without the use of filler material”.
AWS has grouped the processes together according to the “mode of energy transfer” as the primary consideration. A secondary factor is the “influence of capillary attraction in effecting distribution of filler metal” in the joint. Capillary attraction distinguishes the welding processes grouped under “Brazing” and “Soldering” from “Arc Welding”, “Gas Welding”, “Resistance Welding”, “Solid State Welding”, and “Other Processes.”
'ARCON' group of companies, a New Delhi based & ISO: 9001 certified company, is a manufacturer of a wide range of welding products which are unbeatable in quality or any other assessments. Our aim is to provide quality Products at most reasonable prices.
Our entire range of products are timely examined under the guidance of visionary professionals who have vast experience in manufacturing these products. Our R & D teams assist us to keep on serving superior quality products.
We are in the welding trade since last 32 years. With ten distributors and technical support offices located at Ahmedabad, Bangalore, Bhatinda (Punjab), Chennai, Indore, Kolkata, New Delhi, Raipur and Secunderabad and a number of dealers all over the Country, 'ARCON' group of companies is the leading supplier of a wide range of welding, cutting & safety products in India.
We hope that we may continue to rely on your warm support and guidance in order to serve you better.
Organized Seminar at Secunderabad (June 2007)
WHAT IS WELDINGParticipated in Weld India Expo 2008 in Chennai
Participated in Weld India Expo 2008 in Mumbai
Organized Seminar at Udupi (March 2009)
AluminiumTIG Rods
Stainless Steel
TIG Rods
TIG / MIG WELDING CONSUMABLES
TIG/MIG RODS & WIRES FOR AL., SS & LOW ALLOY STEEL
ALUMINIUM TIG / MIG RODS & WIRESAS PER IS : 5897
STANDARD CHEMICAL COMPOSITION
Stainless Steel Filler Rods and Wires are available As Per IS : 1278.These materials are available in 1mtr. straight cut lengths and in layer wounded plastic spools. Straight cut lengths are used for TIG welding and spools are used for MIG welding.All cut lengths are embossed with grades.Cut length are available in composite cardboard packets containing 5 kg. each. MIG wires are available in plastic spools,12.5 kg. (approx.) per spool in SS and 7 kg. (approx.) per spool in aluminium.
FEATURES
GROUP - 1W
EL
DI
NG
C
ON
SU
MA
BL
ES
S P E C I F I C A T I O N S
19500
43000
0.04
0.1
0.05
0.5
Welding of aluminium &
aluminium constructions
Welding of AI-SI alloy
with SI content upto 6%
High fluidity material for
brazing with good finish
& strong joints
Welding of Al-MG alloys
for container, automobile
industries & ship building
DESIGNATIONCU MN APPLICATION
NEW
G1B
NG21
NG2
NG6
OLD
1050
4043
4047
5356
AWS
.....
0.2
MG
0.3
4.5-6.0
SI
0.4
0.6
FE
0.1
0.2
ZN
46000
55000
0.1
0.1
0.2
4.5-5.5
10-13
0.6
0.6
0.5
0.5
0.5
0.2
0.2
Stainless Steel MIG Wire SpoolAluminium MIG Wire Spool
PRESSURE REGULATORS (SINGLE STAGE)
GROUP - 2
Single Stage Pressure Regulators are suitable for cutting, welding and heating processes. In this series, single gauge (showing only cylinder pressure) and double gauge (showing both cylinder and outlet pressure) regulators are available.
A-1+Gas Service and A-2+Gas Service indicate the service available as follows :
Inlet Fittings - As per IS : 3224
Outlet Fittings - As per IS : 6016
AR-1201
AR-1202+Gas
AR-1203
Gas Control Valve
Diaphragm Set
Fibre Ring
1 No.
1 No.
1 No.
STANDARD REPAIRING KIT
AR-1205
AR-1206
AR-1207
AR-1208
AR-1209+Gas
AR-1210+Gas
AR-1211+Gas
AR-1212+Gas
AR-1213
AR-1214+Gas
AR-1204 Bonnet
Pressure Key
Main Spring Cap
Main Spring
Regulator Body
Gas Inlet Connection Nipple
Gas Inlet Connection Nut
Hose Connection Nut Nipple Set
Outlet Adapter
Safety Valve
Pressure Gauge
OTHER SPARE PARTS
AR-1205PRESSURE KEY
AR-1204BONNET
AR-1206MAIN SPRING CAP
AR-1203FIBRE RING
AR-1207MAIN SPRING
AR-1202DIAPHRAGM SET
AR-1201GAS CONTROL VALVE
AR-1209+GASGAS INLET CONNECTION
NIPPLE
*
AR-1214+GASPRESSURE GAUGE
*
AR-1210+GASGAS INLET CONNECTION
NUT
*
AR-1208REGULATOR BODY
AR-1213SAFETY VALVE
AR-1212+GASOUTLET ADAPTER
*AR-1211+GAS
HOSE CONNECTIONNUT NIPPLE SET
*
* + Gas indicates that for different gases, spare parts will be different. Other parts are common in the above series.
S P E C I F I C A T I O N S
MODELS
A-1OX
A-1DA
A-2OX
A-2DA
A-2AR
Single Gauge Oxygen
Single Gauge DA
Double Gauge Oxygen
Double Gauge DA
Double Gauge Argon
A-2AF
A-2CO2
A-2CF
A-2NT
A-2HY
A-2MOX
A-2HP+Gas
Double Gauge Argon
With Flow Meter
Double Gauge CO2
Double Gauge CO2
With Flow Meter
Double Gauge Nitrogen
Double Gauge Hydrogen
Double Gauge Medical Oxygen
High Pressure Regulator
100 Micrones
Fitted in Gas Inlet Connection Nipple(AR-1209+Gas)
BRONZE FILTERS
1 No.
50 Micrones
Fitted in Gas ControlValve (AR-1201)
1 No.
GA
S
WE
LD
IN
G
&
CU
TT
IN
G
EQ
UI
PM
EN
TS
PRESSURE REGULATORS (TWO STAGE)
* +Gas indicates that for different gases, spare parts will be different. Other parts are common in the above series.
AR-1205Pressure Key
AR-1204TSBonnet
AR-1207TSMain Spring
AR-1207TFMain Spring
AR-1202TFDiaphragm Set
AR-1202TSDiaphragm Set
AR-1201Gas Control Valve
AR-1201Gas Control Valve
AR-1206TSMain Spring Cap
AR-1206TFMain Spring Cap
AR-1203TSFibre Ring
AR-1203TFFibre Ring
AR-1209+GASInlet Connection Nipple
* Gas
AR-1210+GASInlet Connection Nut
*Gas
AR-1212+GAS*Outlet Adapter
AR-1211+GASHose Connection
*
Nut Nipple SetNut Nipple Set
AR-1204TFBonnet
AR-1213Safety Valve
AR-1214+GAS +CPressure Gauge
*
(Cylinder Pressure)
AR-1208TRegulator Body
Two Stage Pressure Regulators are suitable for gas cutting, welding, brazing and heating processes. Two Stage Pressure Regulators minimise the chances of accident and ensure a greater life of diaphragms. Also outlet pressure is more accurate as compared to single stage because total pressure drops in two stages. In the First stage pressure is fixed and in the second stage it can be regulated by pressure key.
Bonnet for second stage of two stage regulators
Bonnet for first stage of two stage regulators
Pressure Key
Main Spring Cap
Main Spring for second stage of two stage regulators
Main Spring for first stage of two stage regulators
Regulator body for two stage regulators
Gas Inlet connection nipple
Gas Inlet connection nut
Hose connection nut nipple set
Outlet Adapter
Safety valve
Pressure gauge for 'cylinder pressure'
Pressure gauge for 'delivery pressure'
AR-1204TS
AR-1204TF
AR-1205
AR-1206
AR-1207TS
AR-1207TF
AR-1208T
AR-1209+Gas
AR-1210+Gas
AR-1211+Gas
AR-1212+Gas
AR-1213
AR-1214+Gas+C
AR-1214+Gas+D
OTHER SPARE PARTS
Inlet Fittings - As per IS : 3224
Outlet Fittings - As per IS : 6016
MODELS
A-TOX
A-TMOX
A-TDA
A-TAR
A-TCO2
A-THY
A-TNT
Two Stage Oxygen
Two Stage Medical Oxygen
Two Stage DA
Two Stage Argon
Two Stage CO2
Two Stage Hydrogen
Two Stage Nitrogen
AR-1201
AR-1202TF
AR-1202TS
AR-1203
Gas Control Valve
Diaphragm Set + Gas
Diaphragm Set + Gas
Fibre Ring
2 Nos.
1 No.
1 No.
1 No.
STANDARD REPAIRING KIT
S P E C I F I C A T I O N S
AR-1214+GAS +CPressure Gauge
*
(Delivery Pressure)
100 Micrones
Fitted in Gas Inlet Connection Nipple(AR-1209+Gas)
BRONZE FILTERS
1 No.
50 Micrones
Fitted in Gas ControlValve (AR-1201)
1 No.
MANUAL BLOW PIPES FOR CUTTING (GAS CUTTER)
GROUP - 2
S P E C I F I C A T I O N S
AR
NC
O
AC-9105MIXTURE
PIPE
AC-9107INJECTOR
AC-9108CUTTING
OXY. LEVER
AC-9109HANDGRIP
AC-9110SCREW
AC-9112ADOPTER AC-9111
LEVER PIN
AC-9113PIPE
JOINTER
AC-9114LEVERLOCK
AC-9115CUTTING OXY.PIPE (SMALL)
AC-9116FUEL GAS
PIPE
AC-9117HEATINGOXY. PIPE
AC-9118OXY./FUEL
GAS CONTROLVALVE
AC-9119VALVE NUT
AC-9120VALVE KNOB
(RED OR BLUE)
AC-9121CUTTER
BODY
AC-9122NON-RETURN
NUT NIPPLE SETAC-9123CUTTING
OXY. VALVE
AC-9124HEATING
OXY. PLUG
AC-9101NOZZLE NUT
AC-9102CUTTING NOZZLE(A-TYPE / B-TYPE)
AC-9103CUTTER HEAD
AC-9104CUTTINGOXY. PIPE
(BIG)AC-9106SOCKET
NUT
MODELS
A-DL9
A-DL18
All rubber washers used in cutter
Straight Head Cutter
REPAIRING KIT
AC-9101
AC-9102
AC-9103
AC-9104
AC-9105
AC-9106
AC-9107
AC-9108
AC-9109
AC-9110
AC-9111
AC-9112
AC-9113
AC-9114
AC-9115
AC-9116
AC-9117
AC-9118
AC-9119
AC-9120
AC-9121
AC-9122
AC-9123
AC-9124
OTHER SPARE PARTS
Nozzle Nut
Cutter Head
Cutting Oxy. Pipe (Big)
Mixture Pipe
Socket Nut
Injector
Cutting Oxy. Lever
Hand Grip
Screw
Lever Pin
Adopter
Pipe Jointer
Lever Lock
Cutting Oxy. Pipe (Small)
Fuel Gas Pipe
Heating Oxy. Pipe
Oxy./Fuel Gas Control Valve
Valve Nut
Valve Knob (Red or Blue)
Cutter Body
Non-Return Nut Nipple Set
Cutting Oxy. Valve
Heating Oxy. Plug
The following Manual Blow Pipes are suitable for cutting of ferrous metals. These models are suitable for cutting ferrous metals with both oxy.-acty. or oxy.-fuel gases. Only difference for both gases is of cutting nozzles.
o90 Angle Cutter (for general use)
Cutting Nozzle (A-Type / B-Type)
GA
S
WE
LD
IN
G
&
CU
TT
IN
G
EQ
UI
PM
EN
TS
LOW PRESSURE MANUAL BLOW PIPESFOR WELDING (WELDING TORCH)
S P E C I F I C A T I O N S
MIXTURE PIPEAWT-2
JOINT NUTAWT-3
TIP / NOZZLEAWT-1+NO
INJECTORAWT-4+NO
WELDING TORCH BODYAWT-5
HAND GRIPAWT-9
PIPE SOCKETAWT-10
GAS INLETCONNECTAWT-1
OR1/8
GAS INLETCONNECTAWT-1
OR1/6
OXYGEN PIPEAWT-7
FUEL GAS PIPEAWT-8
GAS CONTROL VALVEAWT-6
Low Pressure Manual Welding Blow Pipes are suitable for welding with oxygen and acetylene gases. In this low pressure system, oxygen is taken as usual from a high pressure cylinder but acetylene is generated by the action of water on carbide (usually calcium carbide) in low pressure acetylene generator. Tips and injector can be changed according to job thickness.
Also suitable for High Pressure
A-WT
MODEL CODE
ARC-2076
AC
NR
O
OTHER SPARE PARTS
Tip / Nozzle
Mixture Pipe
Joint Nut
Injector
Welding Torch Body
Gas Control Valve
Oxygen Pipe
Acetylene Pipe
Hand Grip
Pipe Socket
Gas Inlet Connector, 8 mm
Gas Inlet Connector, 6 mm
AWT-1+No
AWT-2
AWT-3
AWT-4+No
AWT-5
AWT-6
AWT-7
AWT-8
AWT-9
AWT-10
AWT-11/8
AWT-11/6
O . C GGas welding with xy - arbide as
O . GGas welding with xy -DA as
O . H GGas welding with xy - ydrogen as
O . C G HBrazing with xy - LPG/ oal as/ ydrogen
.Heating with Oxy -LPG
THIS TORCH IS SUITABLE FOR
GROUP - 2
Heating burners are available in 0, 1, 2, 3, 4, 5 & 6 sizes. 3 & 4 size burners are available with the heating torch. For 0, 1, 2 & 3 size burners - please use M-68 nipple and M-6 LPG industrial rubber hose. For 4, 5 & 6 size burners - please use M-88 nipple and M-8 LPG industrial rubber hose for better results.
S P E C I F I C A T I O N S
HIGH PRESSURE HEATING TORCH(OXYGEN/DA HEATING TORCH)
Model : A-HPHT, Code : ARC-2087
LOW PRESSURE HEATING TORCH (LPG HEATING TORCH)Model : A-LHT, Code : ARC-2086
MIXTURE NOZZLE
HEATING NOZZLE
SPRAY BURNER
GA
S
WE
LD
IN
G
&
CU
TT
IN
G
EQ
UI
PM
EN
TS
S P E C I F I C A T I O N S
LPG REGULATOR FOR INDUSTRIAL USEModel : A-LPG, Code : ARC-2013
COMPLETE CO2 ASSEMBLYModel : A-CCA, Code : ARC-2075
LPG REGULATOR FOR INDUSTRIAL USEModel : A-2LPG, Code : ARC-2014
FLOW METER FOR ARGON/CO2
(READING: 0-40 LPM)Model : A-FM, Code : ARC-2074
NON-RETURN VALVE/ARRESTOR FOR GAS
CUTTER & PUG CUTTER
NON-RETURN VALVE/ARRESTOR FOR
PRESSURE REGULATORCO2 CONSTANT PRE-HEATER
GROUP - 2
S P E C I F I C A T I O N S
TWO-WAY VALVE FOR OXY./FUEL GAS
GAS CUTTING NOZZLES (A-TYPE / B-TYPE)
INDUSTRIAL GAS MANIFOLD SYSTEM FOR 3 CYLINDERS (MODEL : A-IGM/3, CODE : ARC-2088)
uta
Cle
a
Si
ble
ners
N
e
ye
Cut
ting
ozzl
(B-T
p)
Noz
zle
aki
g Pc.
)
Pc
n(1
Both endssealed with
tin caps
Cut
ting
Noz
zle
(A-T
ype)
GA
S
WE
LD
IN
G
&
CU
TT
IN
G
EQ
UI
PM
EN
TS
PUG CUTTING MACHINEModel : A-PCM/75, Code : ARC-2084
‘Arcon’ Pug Cutting Machines are suitable for cutting ferrous metal sheets and plates in straight direction with oxy.-acty. or oxy.-fuel gases. The only difference for both gases is of cutting nozzles. This machine is moved on an aluminium track specially designed for this purpose. You can adjust the speed of this machine according to the thickness of the cutting metals by speed controller knob (APC-912). The machine can be moved both in the forward and reverse direction with the help of stuggle switch (APC-913).
S P E C I F I C A T I O N S
HANDLEAPC-910
NOZZLE NUTAPC-901
GAS CUTTING NOZZLE(A-TYPE / B-TYPE)APC-902
GUARD PLATEAPC-914
PUG CUTTER HOLDERAPC-907
PUG CUTTERAPC-903
ALUMINUM HAND WHEELAPC-909
FUSEAPC-911
NUT NIPPLE SET, SIZE : M-66/68APC-904/66/68
AL. KNOB (RED OR BLUE) APC-905
RACK & SLIDEAPC-906
STUGGLE SWITCHAPC-913
ELECTRIC PARTS INSIDE• POTENTIO METER (APC-915)• DRIVE MOTOR (APC-916)• GEAR BOX (APC-917)
SPEED CONTROLLER KNOBAPC-912
1 Set
1 no. each
1 no.
4 nos.
2 nos.
1 no. each
2 nos. each
1 no.
Circle Cutting Attachment
NRV / Arrestor (Oxy. & Fuel Gas)
Cutting Nozzle, B-3/64
Connection Hose :
1/4”
5/16”
Nut Hose Coupling :
LH 1/4” BSP & RH 1/4” BSP
LH 5/16” BSP & RH 5/16” BSP
Instructions Manual
KIT ALUMINIUM TRACK(FOR STRAIGHT LINE CUTTING)
GROUP - 2
S P E C I F I C A T I O N S
RUBBER HOSE FOR WELDING
When Welding, heating & cutting operations are done with oxygen - acetylene flame, the gases are carried to the required equipment from different gas storage and cylinders with the help of rubber hose. The hose used should be light in weight and consistent with strength and durability and it must be nonporous to prevent loss of valuable gases.
‘Arcon’ hoses embodies the very best in engineering. These are carefully made of laboratory tested materials for the kind of ruggedness that keep it on the job longer and save your money.
SALIENT FEATURES
The delivery pressure of ‘Arcon’ hose is remarkably stable inspite of changes in flow rate temperature and other conditions. They are rugged in design and are very safe both of which are important aspects for superior performance.
‘Arcon’ Welding hose is made strictly as per IS : 447-1988. All operations are inspected frequently during every stage of manufacturing. Finished product is carefully tested to make sure that they meet the specification for bursting pressure, tensile strength, elongation, adhesion strength test etc.
This kind of quality control assure you that ‘Arcon’ hose you buy will be of the most superior quality.
CAUTION
It is hazardous to interchange acetylene hose or use other types of welding hose for LPG. LPG being Liquified Petroleum Gas has corrosive action which dissolves interior of lining & this mixture would retard flame temperature and produce inferior cut. Also in extreme cases it could lead to explosion & serious fire. A special LPG hose with synthetic lining is recommended & can be supplied on request.
H
E
WELD
ING
OS
ID
MADE IN
NIA
W
N H
OSE
ELDI
G
MADE IN
INDIA
E RB
E
SINGL
UB
R HOSE
ADU
L RUBBER H
OSE
:7-1
9
IS44
88
16
25
35
50
70
95
1.555
0.997
0.708
0.492
0.347
0.263
1.409
0.903
0.641
0.446
0.314
0.239
1.210
0.780
0.554
0.386
0.272
0.206
2.0
2.0
2.0
2.2
2.4
2.6
510/0.2
800/0.2
1114/0.2
708/0.3
999/0.3
1350/0.3
174
228
285
360
454
547
121
161
201
254
320
386
ConductorArea(mm²)
HOFR/TRS
No. & Diaof wires
(mm)
HOFR/TRS
Current RatingMaximum on
60%Duty Cycle
(Amps)
HOFR TRS
NominalThickness
of Covering(mm)
HOFR/TRS
Max. D.C.Resistance
ofConductor
at 20°C(ohms/km)
HOFR/TRS
Voltage Drop(Volts/10m)
HOFR at 90°C TRS at 60°C
TECHNICAL SPECIFICATIONSCOPPER CONDUCTOR
ALUMINIUM CONDUCTOR
35
50
70
95
120
1.153
0.811
0.570
0.428
0.328
1.045
0.735
0.516
0.387
0.297
0.901
0.634
0.445
0.334
0.256
2.0
2.2
2.4
2.6
2.8
500/0.3
708/0.3
999/0.3
1350/0.3
1702/0.3
227
287
361
438
522
159
200
253
306
365
ConductorArea(mm²)
HOFR/TRS
No. & Diaof wires
(mm)
HOFR/TRS
Current RatingMaximum on
60%Duty Cycle
(Amps)
HOFR TRS
NominalThickness
of Covering(mm)
HOFR/TRS
Max. D.C.Resistance
ofConductor
at 20°C(ohms/km)
HOFR/TRS
Voltage Drop(Volts/10m)
HOFR at 90°C TRS at 60°C
S P E C I F I C A T I O N S
• H.O.F.R. (Heat, Oil and Flame R e t a r d a n t ) We l d i n g C a b l e s - Copper/Aluminium Conductor.
• T.R.S. (Tough Rubber Sheathed) General Service Welding Cables - Copper/Aluminium Conductor.
Single core flexible welding cables are suitable for use where conductor temperature does not exceed 60°C for TRS and 90°C for HOFR rubber covering.
All type of cables are ISI approved and manufactured by moulding process. By this process, the cables are more compact, resulting in more and more life.
Welding cables are available in copper and aluminium conductors and both are available in TRS and HOFR insulations. These cables are available in 16mm² to 120mm² conductor area.
GROUP - 3
WELDING CABLES
IS:9857
WELDING ELECTRODE HOLDERS (REF. IS : 2641)
EL
EC
TR
IC
W
EL
DI
NG
A
CC
ES
SO
RI
ES
Welding Electrode Holders are suitable for manual metal arc welding with covered electrodes of length not more than 450mm. ‘ARCON’ welding holders are fitted with special copper alloy jaws whice have more thermal conductivity than copper resulting in less heating problems during welding processes and hence greater life. There are two types of electrode holders :
Three varieties are available in both types of electrode holders :Mark-I (600A/30%) - Suitable for all sizes of electrodes.Mark-II (400A/30%) - Suitable up to 4.00mm electrodes.Mark-III (200A/30%) - Suitable up to 3.15mm electrodes.
‘ARCON’ Electrode Holders are suitable for use on circuits with open circuit voltages up to and including 100 volts (rms).They are light in weight so as to reduce handling problems.They have the provision for alternative positions for gripping electrodes to avoid the necessity for bending the electrodes when welding in different positions.Their design is such that under normal conditions of service, it is possible to weld with electrodes in any position in the holder until a stub only 40mm in length remains without damage to the holder.
FEATURES
S P E C I F I C A T I O N S
TYPE-AFully insulated, suitable for adverse welding conditions like ship
building or welding in enclosed condition.For example, inside vessels.
TYPE-BSemi insulated
(for general open shop conditions)
The above model is suitable for heavy duty welding.TYPE-A / HEAVY DUTY (600A) / 60%
Inside View
Outer Cover
GROUP - 3
S P E C I F I C A T I O N S
EARTH CLAMP FOR WELDING CABLE CONNECTOR
Earth Clamps (Return Current Clamps) are suitablefor ensuring electrical connection between return
current cable and the work piece.
Welding Cable Connectors are suitable to connect any twolengths of flexible welding cable and are suitable to connect
flexible welding cable to welding machine also.
WELDERS' HAND SHIELDSWELDERS' HELMETS
Welders’ Hand Shields are held in hand and are so designed to give protection to the eyes, ears, face, neck and part of the
head of the user during welding and cutting processes.
Welders’ Helmets are supported on the head and are sodesigned to give maximum protection to the eyes, ears,
face, neck and part of the top of the head of the userduring welding and cutting processes.
CHIPPING HAMMERWELDERS' GOGGLES
Welders’ Goggles are worn over the eyes and held in place bya head band. They are used for protecting the eyes and eye
sockets from flying particles and injurious radiations.
Chipping Hammers are used by welders for chipping welds & welding slag.
CODE : ARC-3071
CODE : ARC-3065 CODE : ARC-3063
CODE : ARC-3061 CODE : ARC-3072
Back ViewSpatter Proof Filter Cover
Back View
Spatter Proof Filter Cover
Spatter Proof Filter Cover
WELDING ELECTRODE DRYING OVENS
EL
EC
TR
IC
W
EL
DI
NG
A
CC
ES
SO
RI
ES
The efficiency of welding electrodes can be seriously impaired if the coating of electrode is allowed to get damp due to atmospheric moisture. Dampness causes water vapour to be generated in the arc shield and can adversely affect both the running properties of the electrode (by promoting excessive fireness and spatters) and the quality of welded portion (by creating porosity and piping). This problem is severe with hydrogen controlled electrode. 'Arcon' have a range of welding electrode drying ovens to suit many locations and needs.
OneNo. of HeatingElements
Siphoning System
One
Air Circulation
No of Shelves
TECHNICAL SPECIFICATIONS
80V - DC
300 Watts
3.5 A (approx.)
150°C - Constant
550mm x 250mm x 135mm
480mm x 70mm x 70mm
5 kg. (approx. )
8 kg. (approx.)
Input Supply
Load (input power)
Input Current
Temperature
Overall Dimension
Storage Space
Electrode Capacity
Empty Weight
OneNo. of HeatingElements
Siphoning System
One
Air Circulation
No of Shelves
TECHNICAL SPECIFICATIONS
230V - AC/50Hz
500 Watts
2.0 A (approx.)
50-400°C
550mm x 250mm x 135mm
480mm x 70mm x 70mm
5 kg. (approx. )
8 kg. (approx.)
Input Supply
Load (input power)
Input Current
Temperature
Overall Dimension
Storage Space
Electrode Capacity
Empty Weight
This model is designed for use on installation with 80V input supply. In this oven, t h e t e m p e r a t u r e i s constant. This model is used with welding power source output terminals, holder (fitted with red clamp) & earth side (fitted with black clamp).
MODEL : A-HQ/80V/5CODE : ARC-3103
Siphoning System(ventilation of water vapour created duringdrying process)
This model is designed for use on installation with 230V input supply. In this oven, the temperature is adjusted with the help of t he rmos ta t (Ge rman Make).
TECHNICAL SPECIFICATIONS
230V - AC/50Hz
500 Watts
2.0 A (approx.)
50-250°C
550mm x 250mm x 135mm
480mm x 70mm x 70mm
5 kg. (approx. )
8 kg. (approx.)
One
Input Supply
Load (input power)
Input Current
Temperature
Overall Dimension
Storage Space
Electrode Capacity
Empty Weight
No. of HeatingElements
Siphoning System
One
Air Circulation
No of Shelves
MODEL : A-HQTS/5CODE : ARC-3101
Siphoning System(ventilation of water vapour created duringdrying process)
This model is designed for use on installation with 230V input supply. In this oven, the temperature is adjusted with the help of d i g i t a l t e m p e r a t u r e controller.
MODEL : A-HQD/5CODE : ARC-3102
Siphoning System(ventilation of water vapour created duringdrying process)
S P E C I F I C A T I O N S
WELDING ELECTRODE DRYING OVENS
GROUP - 3
S P E C I F I C A T I O N S
MODEL : A-POD/10CODE : ARC-3105
MODEL : A-POTS/10CODE : ARC-3104
This model is specially designed in square shape withdigitally controlled range 50°C - 400°C. The variable
temperature setting enables electrodes to be maintained for optimum performance.
This model is specially designed in square shape withthermostatically controlled range 50°C - 250°C. The
variable temperature setting enables electrodes to be maintained for optimum performance.
TECHNICAL SPECIFICATIONS
230V - AC/50Hz
1.0 K.V
4.0 A (approx.)
50-250°C
600mm x 250mm x425mm
480mm x 150mm x 150mm
10 kg. (approx.)
22 kg. (approx.)
Two
Siphoning System
Two
Input Supply
Load (input power)
Input Current
Temperature
Overall Dimension
Storage Space
Electrode Capacity
Empty Weight
No. of Heating Elements
Air Circulation
No of Shelves
Two
Siphoning System
Two
Air Circulation
No of Shelves
No. of Heating Elements
TECHNICAL SPECIFICATIONS
230V - AC/50Hz
1.0 K.V
4.0 A (approx.)
50-400°C
600mm x 250mm x425mm
480mm x 150mm x 150mm
10 kg. (approx.)
22 kg. (approx.)
Input Supply
Load (input power)
Input Current
Temperature
Overall Dimension
Storage Space
Electrode Capacity
Empty Weight
Siphoning System(ventilation of water
vapour created duringdrying process)
Siphoning System(ventilation of water
vapour created duringdrying process)
WELDING ELECTRODE DRYING OVENS
EL
EC
TR
IC
W
EL
DI
NG
A
CC
ES
SO
RI
ES
TECHNICAL SPECIFICATIONS
230V - AC/50Hz
1.5 K.V
7.5 A (approx.)
50-250° C
650mm x 450mm x 650mm
300mm x 300mm x 480mm
25 kg. (approx.)
72 kg. (approx.)
Three
Siphoning System
Five
Input Supply
Load (input power)
Input Current
Temperature
Overall Dimension
Storage Space
Electrode Capacity
Empty Weight
No. of Heating Elements
Air Circulation
No of Shelves
Three
Siphoning System
Five
No. of Heating Elements
Air Circulation
No of Shelves
TECHNICAL SPECIFICATIONS
230V - AC/50Hz
1.5 K.V
7.5 A (approx.)
50-400° C
650mm x 450mm x 650mm
300mm x 300mm x 480mm
25 kg. (approx.)
72 kg. (approx.)
Input Supply
Load (input power)
Input Current
Temperature
Overall Dimension
Storage Space
Electrode Capacity
Empty Weight
Four
Siphoning System
Five
No. of Heating Elements
Air Circulation
No of Shelves
TECHNICAL SPECIFICATIONS
230V - AC/50Hz
2.0 K.V
10.0 A (approx.)
50-400° C
900mm x 640mm x 800mm
500mm x 500mm x 500mm
50 kg. (approx.)
105 kg. (approx.)
Input Supply
Load (input power)
Input Current
Temperature
Overall Dimension
Storage Space
Electrode Capacity
Empty Weight
MODEL: A-COD/50
This model has a double walled insulated cabinet with bottom mounted heating elements to ensure even heat distribution. These ovens can
be used as the sole means of drying or as the intermediary, until transferred to a portable oven.
S P E C I F I C A T I O N S
This model is specially designed in square shape with digitally controlled range 50° C - 400° C. The variable temperature setting enables electrodes to be maintained for optimum performance.
MODEL: A-COD/25
This model is specially designed in square shape with thermostatically controlled range 50° C - 250° C. The variable temperature setting enables electrodes to be maintained for optimum performance.
MODEL: A-COTS/25
Siphoning System(ventilation of water
vapour created duringdrying process)
Siphoning System(ventilation of water
vapour created duringdrying process)
Siphoning System(ventilation of water
vapour created duringdrying process)
CODE : ARC-3106
CODE : ARC-3107
CODE : ARC-3108
GROUP - 3
S P E C I F I C A T I O N S
WELDING ELECTRODE / FLUX DRYING OVENS
TECHNICAL SPECIFICATIONS
230V - AC/50Hz
4.0 K.V
15.0 A (approx.)
50-400°C
1200mm x 660mm x 960mm
480mm x 700 mm x 650mm
100 kg. (approx.)
200 kg. (approx.)
Eight
Siphoning System
Ten
Input Supply
Load (input power)
Input Current
Temperature
Overall Dimension
Storage Space
Electrode Capacity
Empty Weight
No. of Heating Elements
Air Circulation
No of Shelves
TECHNICAL SPECIFICATIONS
230V - AC/50Hz
4.0 K.V
15.0 A (approx.)
50-400°C
1200mm x 660mm x 960mm
480mm x 700 mm x 650mm
100 kg. (approx.)
200 kg. (approx.)
Eight
Siphoning System
Ten
Input Supply
Load (input power)
Input Current
Temperature
Overall Dimension
Storage Space
Flux Capacity
Empty Weight
No. of Heating Elements
Air Circulation
No of SS Trays
MODEL : A-COD/100CODE : ARC-3109
This model has a double walled insulated cabinet with bottom & side wall mounted heating elements to ensure even heat distribution. These ovens can be used as the sole means
of drying electrodes or as the intermediary, until transferred to a portable oven.
MODEL : A-CODF/100CODE : ARC-3110
This model has a double walled insulated cabinet with bottom & side wall mounted heating elements to ensure even heat distribution. These ovens can be used as the sole means
of submerge arc welding flux drying.
Siphoning System(ventilation of water
vapour created duringdrying process)
Siphoning System(ventilation of water
vapour created duringdrying process)
EL
EC
TR
IC
W
EL
DI
NG
A
CC
ES
SO
RI
ES
S P E C I F I C A T I O N S
HOT AIR WELDING GUN (PVC WELDING TORCH)
Hot Air Welding is a fabrication process for thermoplastic* materials (like PVC, HDPE, PP, IDPE etc.). Heated air heats and melts both the thermoplastic substrate material and thermoplastic filler rods. This is a purely manual technique so weld quality is dependent on the skill of the welder. This process is mainly used in chemical storage vessels, ventilation ducting and repair of plastic mouldings such as car bumpers.
‘Arcon’ Hot Air Welding Gun is available in 230V - 750 watts along with power energy regulator. It also requires an air compressor for air supply through attached nipple.
(FOR THERMOPLASTIC MATERIALS)CODE : ARC-3131
PROCEDURE OF USEFirst connect the gun with air compressor and energy regulator. Start air pressure by opening air control valve. Now
start power supply and switch on the energy regulator to the full until the air attain required temperature. Then set the regulator at 6 to 7 no. for continuous use. At the time of switching off, reverse the process.
‘Arcon’ Hot Air Welding Gun is fitted with heat proof DMC moulded body and plug-in-type heating element (for easy replacement) and needle control valve (to control air flow as required).
*NOTE:- There are two groups of plastic materials, Thermoplastics and Thermosets. The hot gas welding techniques is only applicable to those plastic materials that can be heated and melted repeatedly, namely Thermoplastics.
Electronic Energy Regulator
Hot Air Welding Gun
Compressor Air Connection
Plug-in-Type Heater
S P E C I F I C A T I O N S
GROUP - 4
INVERTER BASE RECTIFIERFOR ELECTRODE WELDING & TIG WELDING
ELECTRODE WELDING SET TIG WELDING SETMIG/MAG WELDING SET
POWER SOURCES FOR ARC WELDING
MODEL : A-IRTE/200 CODE : ARC-4011INVERTER BASE RECTIFIER
FOR ELECTRODE WELDING & TIG WELDING (THREE PHASE)
MODEL : A-IRTTE/400, CODE : ARC-4012MODEL : A-IRTTE/600, CODE : ARC-4013
MODEL : A-RTE/400, CODE : ARC-4001MODEL : A-RTE/600, CODE : ARC-4002
MODEL : A-RTE/400, CODE : ARC-4001MODEL : A-RTE/600, CODE : ARC-4002 ATTACHMENT : ARC-4003
MODEL : A-RM/400, CODE : ARC-4006MODEL : A-RM/600, CODE : ARC-4007
WE
LD
IN
G
PO
WE
R
SO
UR
CE
S
S P E C I F I C A T I O N S
INVERTER BASE RECTIFIER FOR TIG & ELECTRODE WELDING
Inverter technology is a voltage conversion system which applied to welding makes compact power sources with a very low energy consumption. Inverter based constant & direct current power sources uses the latest knowledge of electronics technology applied to welding.
SPECIAL FEATURES
Total indigenous machine using IGBT, suitable for unfavourable Indian working conditions (like high temperature, humidity, dust and voltage fluctuations).Saves energy up to 80% as compared to conventional machines.Designed to meet highest standards for safety and reliability.Light in Weight.
Code
INPUT
ARC-4013ARC-4012
Technical Specifications
Input Supply
Phase / Frequency
350V - 465V
3 / 50-60 HZ
350V - 465V
3 / 50-60 HZ
MODEL A-IRTTE/600A-IRTTE/400
Max. Installed Power (HP) 2822
OUPUT
OCV - DC
Current Range (Amps)
75V - 85V
10 - 600
75V - 85V
5 - 400
Current @ 60% Duty Cycle 600 A400 A
Current @ 100% Duty Cycle 380 A240 A
OTHERS
Class of Insulation
Cooling
H
Forced Air
H
Forced Air
Dimension (LxWxH) in mm (approx.) 540 x 420 x 720680 x 260 x 360
Weight in kgs (approx.) 7050
GROUP - 4
INVERTER BASE RECTIFIER FOR MIG WELDING
Inverter technology is a voltage conversion system which applied to welding makes compact power sources with a very low energy consumption. Inverter based constant & direct current power sources uses the latest knowledge of electronics technology applied to welding.
SPECIAL FEATURES
Total indigenous machine using IGBT, suitable for unfavourable Indian working conditions (like high temperature, humidity, dust and voltage fluctuations).Saves energy up to 80% as compared to conventional machines.Designed to meet highest standards for safety and reliability.Light in Weight.
Model, Code
Input Supply
No load current
Max input KVA
Current Range
Open Circuit Voltage
Class of Insulation
Cooling
Protection Class
Duty Cycle
Suitable for
MCB
Dimension (LXWXH)
Weight
A-IRM/300, ARC-4017
1Ø 50-60Hz. 230V AC+15%
0
3.8/4.5 KVA (MIG)
Electronic Control
46V DC+5%
H Class
Forced Air
IP 23
50%-200 Amp.
Up to 0.8/1.2 mm MS andSS MIG Wire
32 Amp. cut off
490x240x240 mm
Approx. 35 kg. (Including wire feeder)
Technical Specifications
S P E C I F I C A T I O N S
Current Control
MIG Wire Spool
IchingGas On
SpeedControl
Gas In
Wire Feeder Connection
Earth
MIG Torch
GROUP - 5
P.U. INJECTION INDUSTRIAL SAFETY SHOES (WITH STEEL TOE CAP & FULL BOTTOM STEEL PLATE)
AS PER EN ISO:20345
PVC INDUSTRIAL GUMBOOTS (WITH FABRIC LINING & STEEL TOE CAP)
AS PER IS:12254
HALF KNEE STYLE
SHORT KNEE STYLE
CODE : ARC-5046 to 5049
CODE : ARC-5056 to 5059
S P E C I F I C A T I O N S
ANKLE STYLECODE : ARC-5036 to 5040
DERBY STYLECODE : ARC-5026 to 5030
is a registered trademark of Mitco Engineering Works
Copyright © All rights reserved. Any unauthorized reproduction or use of logos, images or design elements is strictlyprohibited by law. No part of the compilation may be reproduced in any manner without written permission.
Volume : 2010-2011Design and Specificitions are subject to change without notice owing to continuous product upgradation.
MITCO ENGINEERING WORKS
MITCO WELD PRODUCTS PVT. LTD.
E-mail : [email protected] : www.indiamart.com/arcon
A-97, Mangolpuri Industrial Area, Phase-ll,Delhi -110 034 (INDIA)