w163 disassemble/assemble center...
TRANSCRIPT
AR68.20-P-2150GZ Disassemble/assemble center console 26.4.06MODEL 164
P68.20-3327-09
1 Trim strip 15 Portable CTEL stowage tray 32 Air nozzle4 Grab handle 20 Armrest cover5 Ashtray 25 Bracket N72/2 RCP [HBF] control unit10 Rear center console covering 26 Lock X58/19 Left 2nd seat row socket13 Stowage box 28 Stowage tray X58/20 Right 2nd seat row socket
1 Trim strip2 Bolt3 Bolt4 Grab handle
P68.20-3328-04
5 Ashtray6 Clip
P68.20-3329-04
Page 1 of 6© Daimler AG, 7/1/13, G/06/13, ar68.20-p-2150gz, Disassemble/assemble center consoleMODEL 164
7 Bolts8 Electrical connectors9 Electrical connector10 Rear center console
N72/2 RCP [HBF] control unitX58/19 Left 2nd seat row socketX58/20 Right 2nd seat row socket
P68.20-3330-06
11 Bolt12 Guide lugs13 Stowage box
P68.20-3331-04
14 Bolts15 Portable CTEL stowage tray16 Electrical connector17 Plug connections18 Clamp19 Guide lug
P68.20-3332-06
Page 2 of 6© Daimler AG, 7/1/13, G/06/13, ar68.20-p-2150gz, Disassemble/assemble center consoleMODEL 164
20 Armrest cover21 Openings22 Rubber grommet
P68.20-3333-11
23 Clips24 Cable25 Bracket
P68.20-3334-11
26 Lock
P68.20-3335-01
Shown installed
27 Pin28 Stowage tray
P68.20-3336-04
Page 3 of 6© Daimler AG, 7/1/13, G/06/13, ar68.20-p-2150gz, Disassemble/assemble center consoleMODEL 164
P68.20-3337-09
29 Clips 31 Clips30 Clips 32 Air nozzle
33 Bolts
N72/2 RCP [HBF] control unit
P68.20-3338-01
34 Socket internal components35 Clips
X58/19 Left 2nd seat row socketX58/20 Right 2nd seat row socket
P68.20-3339-06
Disassemble/assemble
1 Remove center console AR68.20-P-2000GZPage 4 of 6© Daimler AG, 7/1/13, G/06/13, ar68.20-p-2150gz, Disassemble/assemble center console
MODEL 164
2 Unclip trim strip (1) Completely move long wedge to clips (arrows A) to prevent damaging trim strip.
Installation: Ensure that guide is seated correctly
*115589035900 Long wedge
3 Remove bolts (2, 3) *BA68.20-P-1001-01E 4 Remove grab handle (4)5 Open ashtray (5)
6 Unclip clip (6) from ashtray (5). Installation: Ashtray should arrest audibly.
*115589035900 Long wedge7 Remove ashtray (5).
8 Remove bolts (7)9 Unlock armrest cover (20) and position
vertically
10 Unclip rear center console cover (10) Installation: Observe metal clips (arrows upward (arrow B) C)
Pull lower area of rear center console cover up
*115589035900 Long wedge11 Disconnect electrical connectors (8) from
socket for 2nd seat row, left (X58/19) and socket for 2nd seat row, right (X58/20)
12 Disconnect electrical connector (9) from RCP control module (N72/2)
13 Unscrew bolt (11)14 Remove stowage box (13) upward Installation: Observe installation position
of guide lugs (12)
15 Remove bolts (14)16 Unlock stowage tray (28) and position
vertically
17 Raise portable CTEL stowage tray (15) (arrow D)
18 Pull portable CTEL stowage tray (15) toward Installation: Observe guide lug (19).front (arrow E)
19 Turn portable CTEL stowage tray (15)20 Separate electrical connector (16) Only on vehicles with USA version, code
494.
21 Unclip connectors (17)22 Remove clamp (18)23 Unclip armrest cover (20) through openings Installation: Armrest cover should arrest
(21) audibly.*115589035900 Long wedge
24 Pull armrest cover (20) upward (arrows F) Unclip one side, pull upward and hold Unclip other side, pull upward Pull out armrest cover by pulling alternately upward (arrows F).
Installation: Ensure that rubber grommet (22) is seated correctly
25 Guide cable (24) through armrest cover (20).
26 Remove cable (24) from bracket (25). Installation: Observe correct installation position.
27 Unclip clips (23) from bracket (25) *115589035900 Long wedge
28 Pull out bracket (25) toward front (arrow G)29 Pull lock (26) out of armrest cover (20) Lay armrest cover down on suitable
(arrow H) subsurface.30 Pull out bolts (27) toward rear (arrows I) Installation: Observe installation depth
for bolts.31 Remove stowage tray (28)32 Unclip clips (29, 30, 31) *115589035900 Long wedge
33 Remove air outlet (32) Installation: Observe installation position of air outlet.
34 Remove bolts (33)
35 Remove RCP control module (N72/2)36 Remove socket internal components (34) *169589003700 Pliers
from left 2nd seat row socket (X58/19) and right 2nd seat row socket (X58/20)
37 Unclip socket for 2nd seat row, left (X58/19) *115589035900 Long wedgeand socket for 2nd seat row, right (X58/20) from clips (35).
Page 5 of 6© Daimler AG, 7/1/13, G/06/13, ar68.20-p-2150gz, Disassemble/assemble center consoleMODEL 164
38 Assemble in the reverse order
Center console
Number Designation Model
164.1/8
BA68.20-P-1001-01E Bolt, grab handle to center console Nm 15
115 589 03 59 00 169 589 00 37 00
Long wedge Pliers
Page 6 of 6© Daimler AG, 7/1/13, G/06/13, ar68.20-p-2150gz, Disassemble/assemble center consoleMODEL 164