wa2089 mj3000 brochure

7/27/2019 WA2089 MJ3000 Brochure

1/16

MULTI/JOINT 3000 Family

One size fits and grips all

7/27/2019 WA2089 MJ3000 Brochure

2/16

GEORG FISCHER

The technical data are not bindingThey are not warrantedcharacteristics and are subject to

change. Please consult our

General Conditions of Supply

7/27/2019 WA2089 MJ3000 Brochure

3/16

GEORG FISCHER 3

MULTI/JOINT 3000 family consists of following solutions:

Straight couplings flexible type 3000 DN50-300 PN16restraint type 3007 DN50-300 PN16-10

Flange adaptors flexible type 3050 DN50-300 PN16

restraint type 3057 DN50-300 PN16-10

Reduction couplings flexible type 3100 DN65-300 PN16restraint type 3107 DN65-300 PN16-10

Reduction flanges flexible type 3150 DN40-200 PN16restraint type 3157 DN40-200 PN16-10

End caps flexible type 3200 blind DN50-300 PN16restraint type 3207 blind DN50-300 PN16-10

Threaded end caps flexible type 3200 thread DN50-300 PN16restraint type 3207 thread DN50-300 PN16-10

7/27/2019 WA2089 MJ3000 Brochure

4/16

GEORG FISCHER 4

MULTI/JOINT 3000 Family

After the introduction of the MULTI/JOINT 2000 Family, we were almost immediatelyasked for a pull-out resistant version. So, al benefits of the large range, combinedwith the possibility to make a connection restraint.After years of thinking, developing, improving, we finally came in 1997 with the

solution. The third generation of couplings: the MULTI/JOINT

3000 Family.The ranges have been enlarged (up to DN150 stepless) and most important; you candecide in the trench whether you want a flexible or restraint connection.

Your advantages:If you want to ensure the reliability of your pipe distribution system, you need to keepa lot of different couplings and other materials (such as anchoring systems andconcrete thrust blocks) in stock. With the MULTI/JOINT 3000 Family on stock; nomore need for all of that. So you: Reduce stock Increase reliability Save time in ordering and warehouse handling Environmental friendly Save time in installing

+ the couplings are ready for fitting+ no dismantling needed

We can grant you these advantages, due to the important characteristics of theMULTI/JOINT 3000 Family: One size fits all Restraint on nearly all pipe materials The choice for restraint or flexible can be made on the spot Before installing, no dismantling needed

Reliable (once installed, no maintenance necessary) Replaces complicated fitting methods For placing valves, elbows, fire hydrants and pipes end-Ioaded in the piping

system No need for additional support where elbows are build-in With special end-caps (blind or with a threaded outlet)

+++++ Awarded as most innovative industrial product of 1999 in the Netherlands.

+++++ Received the European Engineering Award 2000.

Variofleks and Variofiks

These special rings are built up from segments that are conical in all directions, freeto move independentIy and connected to each other at the same time. This ensurestheir stability.The Varioseal rubber ring is fixed. lts dimensions are such that 100% tightness isassured. The ring has a tested theoretical lifetime of 50 years.The Variofleks ring does not have fiksers and assures you a 100% tight, flexible(8 degrees nominal angularity) connection. If you need a restraint connection, all youhave to do is to put the fiksers in place.

The Variofleks and Variofiks easily adopt the correct size and shape to fit the pipe.

This due to the unique design of the flekscores (segments), the Varioseal (rubber) andthe fiksers. So, ovality and roughness will easily be overcome.

The Variofiks-ring

7/27/2019 WA2089 MJ3000 Brochure

5/16

GEORG FISCHER 5

The complete range

The MULTI/JOINT 3000 family offers straight couplings, flange adaptors,reducers and end-caps (blind or with a threaded outlet from 3/4" up to 2").

Nominal sizes are:

DN50 (40) up to DN300, including DN65, DN125 and DN225.Up to DN 150 stepless. In other words: this is the complete range of fittings,providing for your every need.

Nominal size Suited for outside pipe diameter

DN50 46 - 71DN65 70 - 88DN80 84 - 105DN100 104 - 132DN125 132 - 155DN150 154 - 192DN200 198 - 230DN225 232 - 257DN250 267 - 310DN300 315 - 356

During our 40th anniversary, weshowed an unconventional way of

testing the pull-out resistance of

our couplings: the MULTI/JOINT

3000 Family and stainless steel 500Family, by lifting a grid crate

weighing 526 kg by a helicopter.

Between the helicopter and the

grid crate was a connection ofpipes and the couplings

40 years of the GeorgFischer WAGA System

7/27/2019 WA2089 MJ3000 Brochure

6/16

GEORG FISCHER 6

DN Connection Code a b d e Work. Weight

1 3 ST-DM1) Press. kg.

50 46 - 71 46 - 71 709.307.010 220 - 250 164 100 3xM12 PN16 5.065 70 - 88 70 - 88 709.307.012 209 - 233 186 95 3xM12 PN16 5.280 84 - 105 84 - 105 709.307.014 234 - 262 204 115 3xM12 PN16 6.2

100 104 - 132 104 - 132 709.307.016 230 - 268 236 110 3xM16 PN16 9.5125 132 - 155 132 - 155 709.307.018 246 - 282 264 120 4xM16 PN16* 12.5

150 154 - 192 154 - 192 709.307.020 242 - 298 304 120 4xM16 PN16* 13.2200 198 - 230 198 - 230 709.307.024 297 - 351 354 140 4xM20 PN10* 23.2225 232 - 257 232 - 257 709.307.026 342 - 404 386 145 6xM20 PN10* 32.1250 267 - 310 267 - 310 709.307.028 354 - 424 432 170 6xM20 PN10* 46.0300 315 - 356 315 - 356 709.307.032 356 - 426 490 170 8xM20 PN10* 58.5

MULTI/JOINT 3007 (restraint with Multi/Fiksers2))

1) Stainless steel Bolts & Nuts on request (or see our price list)2) Poly/Fikser on request

* For use on PE-pipes please contact us



50 46 - 71 46 - 71 709.300.010 220 - 250 164 100 3xM12 PN16 5.065 70 - 88 70 - 88 709.300.012 209 - 233 186 95 3xM12 PN16 5.2

80 84 - 105 84 - 105 709.300.014 234 - 262 204 115 3xM12 PN16 6.2100 104 - 132 104 - 132 709.300.016 230 - 268 236 110 3xM16 PN16 9.5125 132 - 155 132 - 155 709.300.018 246 - 282 264 120 4xM16 PN16 12.5

150 154 - 192 154 - 192 709.300.020 242 - 298 304 120 4xM16 PN16 13.2200 198 - 230 198 - 230 709.300.024 297 - 351 354 140 4xM20 PN16 23.2225 232 - 257 232 - 257 709.300.026 342 - 404 386 145 6xM20 PN16 32.1250 267 - 310 267 - 310 709.300.028 354 - 424 432 170 6xM20 PN16 46.0300 315 - 356 315 - 356 709.300.032 356 - 426 490 170 8xM20 PN16 58.5

MULTI/JOINT 3000 (non-restraint)

Body & Clamprings:GGG40

Coating:RESICOAT plastic coating minimum layerthickness 250 Micron acc. to GSKcolour: dark red (RAL 3003)Rubber:NBR according to DIN 3535/3

Bolts & nuts 1):Standard steel 8.8, Delta Magni coated.

Salt spray test acc. to ASTM B 117 andDIN 50021 750 hoursWorking pressure:Liquids 16 barGas 4 bar (8 bar on request)

This type can be used for flexible connections (type 3000) and restraint connections (type3007) of two pipes of different materials with the same nominal diameter.

Material:

7/27/2019 WA2089 MJ3000 Brochure

7/16

GEORG FISCHER 7





Salt spray test acc. to ASTM B 117 andDIN 50021 750 hoursWorking pressure:Liquids 10 barGas 4 bar (8 bar on request)Flanges:Acc. to DIN 28605 PN10/PN16

This type can be used for flexible connections (type 3050) and restraint connections (type3057) with one side a flange and the other side a pipe with the same nominal diameter.



50 46 - 71 50 709.350.010 179 - 194 164 100 3xM12 PN16 5.065 70 - 88 60/65 709.350.012 187 - 198 186 95 3xM12 PN16 5.2

80 84 - 105 80 709.350.014 183 - 197 204 115 3xM12 PN16 6.2100 104 - 132 100 709.350.016 181 - 200 236 110 3xM16 PN16 9.5125 132 - 155 125 709.350.018 196 - 214 264 120 4xM16 PN16 12.5

150 154 - 192 150 709.350.020 194 - 222 304 120 4xM16 PN16 15.3200 198 - 230 200/PN10 709.350.024 224 - 251 354 140 4xM20 PN10 22.0200 198 - 230 200/PN16 709.350.025 224 - 251 354 140 4xM20 PN16 22.0250 267 - 310 250/PN10 709.350.028 260 - 295 432 170 6xM20 PN10 38.5250 267 - 310 250/PN16 709.350.029 260 - 295 432 170 6xM20 PN16 38.5

300 315 - 356 300/PN10 709.350.032 283 - 318 490 170 8xM20 PN10 53.0300 315 - 356 300/PN16 709.350.033 283 - 318 490 170 8xM20 PN16 53.0



50 46 - 71 50 709.357.010 179 - 194 164 100 3xM12 PN16 5.065 70 - 88 60/65 709.357.012 187 - 198 186 95 3xM12 PN16 5.280 84 - 105 80 709.357.014 183 - 197 204 115 3xM12 PN16 6.2

100 104 - 132 100 709.357.016 181 - 200 236 110 3xM16 PN16 9.5125 132 - 155 125 709.357.018 196 - 214 264 120 4xM16 PN16* 12.5

150 154 - 192 150 709.357.020 194 - 222 304 120 4xM16 PN16* 15.3

200 198 - 230 200/PN10 709.357.024 224 - 251 354 140 4xM20 PN10* 22.0200 198 - 230 200/PN16 709.357.025 224 - 251 354 140 4xM20 PN10* 22.0250 267 - 310 250/PN10 709.357.028 260 - 295 432 170 6xM20 PN10* 38.5250 267 - 310 250/PN16 709.357.029 260 - 295 432 170 6xM20 PN10* 38.5

300 315 - 356 300/PN10 709.357.032 283 - 318 490 170 8xM20 PN10* 53.0300 315 - 356 300/PN16 709.357.033 283 - 318 490 170 8xM20 PN10* 53.0

1) Stainless steel Bolts & Nuts on request (or see our price list)2)

Poly/Fikser on request* For use on PE-pipes please contact us

Material:


7/27/2019 WA2089 MJ3000 Brochure

8/16

GEORG FISCHER 8

Material:


1) Stainless steel Bolts & Nuts on request (or see our price list)2) Poly/Fikser on request


DN Connection Code a b d e Work. Weight 1 3 ST-DM1) Press. kg.

80x 65 84 - 105 70 - 88 709.400.020 242 - 268 204 115 3xM12/3xM12 PN16 6.2100x 80 104 - 132 84 - 105 709.400.024 232 - 265 236 110 3xM16/3xM12 PN16 9.4

1 25 x1 00 132 - 155 104 - 132 709.400.032 238 - 275 264 120 4xM16/3xM12 PN16 10.61 50 x1 00 154 - 192 104 - 132 709.400.036 276 - 323 304 120 4xM16/3xM16 PN16 13.71 50 x1 25 154 - 192 132 - 155 709.400.038 276 - 322 304 120 4xM16/4xM16 PN16 14.8

2 00 x1 50 198 - 230 154 - 192 709.400.048 265 - 321 354 120 4xM20/4xM16 PN16 21 .92 25 x2 00 232 - 257 198 - 230 709.400.078 340 - 398 386 145 6xM20/4xM20 PN16 31 .82 50 x2 25 267 - 310 232 - 257 709.400.082 358 - 424 432 170 6xM20/6xM20 PN16 41 .23 00 x2 50 315 - 356 267 - 310 709.400.086 356 - 426 490 170 8xM20/6xM20 PN16 49.1






This type can be used for flexible connections (type 3100) and restraint connections (type3107) of two pipes of different materials with different nominal diameter (see the table).

DN Connection Code a b d e Work. Weight 1 3 ST-DM1) Press. kg.

80x 65 84 - 105 70 - 88 709.407.020 242 - 268 204 115 3xM12/3xM12 PN16 6.2100x 80 104 - 132 84 - 105 709.407.024 232 - 265 236 110 3xM16/3xM12 PN16 9.4

12 5x 10 0 132 - 155 104 - 132 709.407.032 238 - 275 264 120 4xM16/3xM12 PN16 10.615 0x 10 0 154 - 192 104 - 132 709.407.036 276 - 323 304 120 4xM16/3xM16 PN16 13.715 0x 12 5 154 - 192 132 - 155 709.407.038 276 - 322 304 120 4xM16/4xM16 PN16 14.8

20 0x 15 0 198 - 230 154 - 192 709.407.048 265 - 321 354 120 4xM20/4xM16 PN10* 21 .922 5x 20 0 232 - 257 198 - 230 709.407.078 340 - 398 386 145 6xM20/4xM20 PN10* 31 .825 0x 22 5 267 - 310 232 - 257 709.407.082 358 - 424 432 170 6xM20/6xM20 PN10* 41 .230 0x 25 0 315 - 356 267 - 310 709.407.086 356 - 426 490 170 8xM20/6xM20 PN10* 49.1

7/27/2019 WA2089 MJ3000 Brochure

9/16

GEORG FISCHER 9





Salt spray test acc. to ASTM B 117 andDIN 50021 750 hoursWorking pressure:Liquids 16 barGas 4 bar (8 bar on request)Flanges:Acc. to DIN 28605 PN10/PN16

This type can be used for flexible connections (type 3150) and restraint connections (type 3157)

with one side a flange and the other side a pipe with different nominal diameters (see table).

Material:



50x40 46 - 71 40 709.450.008 185 - 200 164 100 3xM12 PN16 4.965x80 70 - 88 80 709.450.018 198 - 210 186 95 3xM12 PN16 8.2

100x80 104 - 132 80 709.450.024 196 - 215 236 110 3xM16 PN16 9.3125x100 132 - 155 100 709.450.032 197 - 215 264 120 4xM16 PN16 11 .3125x150 132 - 155 150 709.450.038 276 - 294 264 120 4xM16 PN16 13.6

225x200 232 - 257 200/PN10 709.450.078 274 - 301 386 190 6xM20 PN10 31 .4225x200 232 - 257 200/PN16 709.450.079 274 - 301 386 190 6xM20 PN16 31 .4


1) Stainless steel Bolts & Nuts on request (or see our price list)2)

Poly/Fikser on request* For use on PE-pipes please contact us



50x40 46 - 71 40 709.457.008 185 - 200 164 100 3xM12 PN16 4.965x80 70 - 88 80 709.457.018 198 - 210 186 95 3xM12 PN16 8.2

100x80 104 - 132 80 709.457.024 196 - 215 236 110 3xM16 PN16 9.3125x100 132 - 155 100 709.457.032 197 - 215 264 120 4xM16 PN16 11 .3125x150 132 - 155 150 709.457.038 276 - 294 264 120 4xM16 PN16 13.6

225x200 232 - 257 200/PN10 709.457.078 274 - 301 386 190 6xM20 PN10* 31 .4225x200 232 - 257 200/PN16 709.457.079 274 - 301 386 190 6xM20 PN10* 31 .4

7/27/2019 WA2089 MJ3000 Brochure

10/16

GEORG FISCHER 10

MULTI/JOINT 3200 Blind (non-restraint)

MULTI/JOINT 3207 Blind (restraint with Multi/Fiksers2))



This type can be used for a flexible connection (type 3200) and a restraint connection (type3207) blind, for closing ehe ends of pipes under construction or taken out of function.



DN Connection Code a b d e nom. Weight 1 3 ST-DM1) press. kg.

50 46 - 71 blind 709.370.010 115-130 164 100 3xM12 PN16 3.765 70 - 88 blind 709.370.012 145-157 186 95 3xM12 PN16 4.080 84 - 105 blind 709.370.014 142-156 204 115 3xM12 PN16 4.6

100 104 - 132 blind 709.370.016 144-163 236 110 3xM16 PN16 6.0125 132 - 155 blind 709.370.018 151-169 264 120 4xM16 PN16 8.2

150 154 - 192 blind 709.370.020 149-177 304 120 4xM16 PN16 11 .0200 198 - 230 blind 709.370.024 180-207 354 140 4xM20 PN16 15.9225 232 - 257 blind 709.370.026 211-242 386 145 6xM20 PN16 23.7250 267 - 310 blind 709.370.028 214-249 432 170 6xM20 PN16 30.7300 315 - 356 blind 709.370.032 219-254 490 170 8xM20 PN16 34.9

DN Connection Code a b d e nom. Weight 1 3 ST-DM1) press. kg.

50 46 - 71 blind 709.377.010 115-130 164 100 3xM12 PN16 3.765 70 - 88 blind 709.377.012 145-157 186 95 3xM12 PN16 4.080 84 - 105 blind 709.377.014 142-156 204 115 3xM12 PN16 4.6

100 104 - 132 blind 709.377.016 144-163 236 110 3xM16 PN16 6.0

125 132 - 155 blind 709.377.018 151-169 264 120 4xM16 PN16*

8.2

150 154 - 192 blind 709.377.020 149-177 304 120 4xM16 PN16* 11.0200 198 - 230 blind 709.377.024 180-207 354 140 4xM20 PN10* 15.9225 232 - 257 blind 709.377.026 211-242 386 145 6xM20 PN10* 23.7250 267 - 310 blind 709.377.028 214-249 432 170 6xM20 PN10* 30.7300 315 - 356 blind 709.377.032 219-254 490 170 8xM20 PN10* 34.9

1)Stainless steel Bolts & Nuts on request (or see our price list)2) Poly/Fikser on request


7/27/2019 WA2089 MJ3000 Brochure

11/16

GEORG FISCHER 11

MULTI/JOINT 3200 threaded (non-restraint)

DN Connection Code a b d e nom. Weight 1 3 flexible press. kg.

50 46 - 71 3/4 709.380.004 115-130 164 100 3xM12 PN16 3.7

50 46 - 71 1 709.380.005 115-130 164 100 3xM12 PN16 3.7

50 46 - 71 1 .1/4 709.380.006 115-130 164 100 3xM12 PN16 3.7

50 46 - 71 1 .1/2 709.380.007 115-130 164 100 3xM12 PN16 3.7

50 46 - 71 2 709.380.008 115-130 164 100 3xM12 PN16 3.7

65 70 - 88 3/4 709.380.009 145-157 186 95 3xM12 PN16 4.0

65 70 - 88 1 709.380.010 145-157 186 95 3xM12 PN16 4.0

65 70 - 88 1 .1/4 709.380.011 145-157 186 95 3xM12 PN16 4.0

65 70 - 88 1 .1/2 709.380.012 145-157 186 95 3xM12 PN16 4.0

65 70 - 88 2 709.380.013 145-157 186 95 3xM12 PN16 4.0

80 84 - 105 3/4 709.380.014 142-156 204 115 3xM12 PN16 4.6

80 84 - 105 1 709.380.015 142-156 204 115 3xM12 PN16 4.6

80 84 - 105 1 .1/4 709.380.016 142-156 204 115 3xM12 PN16 4.6

80 84 - 105 1 .1/2 709.380.017 142-156 204 115 3xM12 PN16 4.6

80 84 - 105 2 709.380.018 142-156 204 115 3xM12 PN16 4.6

100 104 - 132 3/4 709.380.019 144-163 236 110 3xM16 PN16 6.0

100 104 - 132 1 709.380.020 144-163 236 110 3xM16 PN16 6.0

100 104 - 132 1 .1/4 709.380.021 144-163 236 110 3xM16 PN16 6.0

100 104 - 132 1 .1/2 709.380.022 144-163 236 110 3xM16 PN16 6.0100 104 - 132 2 709.380.023 144-163 236 110 3xM16 PN16 6.0

125 132 - 155 3/4 709.380.024 151-169 264 120 4xM16 PN16 8.2

125 132 - 155 1 709.380.025 151-169 264 120 4xM16 PN16 8.2

125 132 - 155 1 .1/4 709.380.026 151-169 264 120 4xM16 PN16 8.2

125 132 - 155 1 .1/2 709.380.027 151-169 264 120 4xM16 PN16 8.2

125 132 - 155 2 709.380.028 151-169 264 120 4xM16 PN16 8.2

150 154 - 192 3/4 709.380.029 149-177 304 120 4xM16 PN16 11 .0

150 154 - 192 1 709.380.030 149-177 304 120 4xM16 PN16 11 .0

150 154 - 192 1 .1/4 709.380.031 149-177 304 120 4xM16 PN16 11 .0

150 154 - 192 1 .1/2 709.380.032 149-177 304 120 4xM16 PN16 11 .0

150 154 - 192 2 709.380.033 149-177 304 120 4xM16 PN16 11 .0

200 198 - 230 3/4 709.380.034 180-207 354 140 4xM20 PN16 15.9

200 198 - 230 1 709.380.035 180-207 354 140 4xM20 PN16 15.9

200 198 - 230 1 .1/4 709.380.036 180-207 354 140 4xM20 PN16 15.9

200 198 - 230 1 .1/2 709.380.037 180-207 354 140 4xM20 PN16 15.9200 198 - 230 2 709.380.038 180-207 354 140 4xM20 PN16 15.9

225 232 - 257 3/4 709.380.049 211-242 386 145 6xM20 PN16 23.7

225 232 - 257 1 709.380.050 211-242 386 145 6xM20 PN16 23.7

225 232 - 257 1 .1/4 709.380.051 211-242 386 145 6xM20 PN16 23.7

225 232 - 257 1 .1/2 709.380.052 211-242 386 145 6xM20 PN16 23.7

225 232 - 257 2 709.380.053 211-242 386 145 6xM20 PN16 23.7

250 267 - 310 3/4 709.380.039 214-249 432 170 6xM20 PN16 30.7

250 267 - 310 1 709.380.040 214-249 432 170 6xM20 PN16 30.7

250 267 - 310 1 .1/4 709.380.041 214-249 432 170 6xM20 PN16 30.7

250 267 - 310 1 .1/2 709.380.042 214-249 432 170 6xM20 PN16 30.7

250 267 - 310 2 709.380.043 214-249 432 170 6xM20 PN16 30.7

300 315 - 356 3/4 709.380.044 219-254 490 170 8xM20 PN16 34.9

300 315 - 356 1 709.380.045 219-254 490 170 8xM20 PN16 34.9

300 315 - 356 1 .1/4 709.380.046 219-254 490 170 8xM20 PN16 34.9

300 315 - 356 1 .1/2 709.380.047 219-254 490 170 8xM20 PN16 34.9

300 315 - 356 2 709.380.048 219-254 490 170 8xM20 PN16 34.9

Material:Body & Clamprings: GGG40

Coating:RESICOAT plastic coatinglayer thickness min. 250 micron (GSK)colour: dark red (RAL 3003)Rubber:NBR according to DIN 3535/3

Bolts & nuts:standard steel 8.8, delta magni coated*.

Salt spray test acc. to ASTM B 117 andDIN 50021 750 hoursor stainless steel AISI 304 (A2) teflon coatedWorking pressure:Liquids 16 barGas 4 bar (8 bar on request)

This type can be used for flexible connections (type 3200) and restraint connections (type3207) with a threaded hole for temporary stops, sample taking an pressure testing. You canalso use it as reducer


1)Stainless steel Bolts & Nuts onrequest (or see our price list)

7/27/2019 WA2089 MJ3000 Brochure

12/16

GEORG FISCHER

MULTI/JOINT 3207 threaded (restraint with Multi/Fiksers2))

DN Connection Code a b d e nom. Weight 1 3 restraint press. kg.

50 46 - 71 3/4 709.387.004 115-130 164 100 3xM12 PN16 3.7

50 46 - 71 1 709.387.005 115-130 164 100 3xM12 PN16 3.7

50 46 - 71 1 .1/4 709.387.006 115-130 164 100 3xM12 PN16 3.7

50 46 - 71 1 .1/2 709.387.007 115-130 164 100 3xM12 PN16 3.7

50 46 - 71 2 709.387.008 115-130 164 100 3xM12 PN16 3.7

65 70 - 88 3/4 709.387.009 145-157 186 95 3xM12 PN16 4.0

65 70 - 88 1 709.387.010 145-157 186 95 3xM12 PN16 4.0

65 70 - 88 1 .1/4 709.387.011 145-157 186 95 3xM12 PN16 4.0

65 70 - 88 1 .1/2 709.387.012 145-157 186 95 3xM12 PN16 4.0

65 70 - 88 2 709.387.013 145-157 186 95 3xM12 PN16 4.0

80 84 - 105 3/4 709.387.014 142-156 204 115 3xM12 PN16 4.6

80 84 - 105 1 709.387.015 142-156 204 115 3xM12 PN16 4.6

80 84 - 105 1 .1/4 709.387.016 142-156 204 115 3xM12 PN16 4.6

80 84 - 105 1 .1/2 709.387.017 142-156 204 115 3xM12 PN16 4.6

80 84 - 105 2 709.387.018 142-156 204 115 3xM12 PN16 4.6

100 104 - 132 3/4 709.387.019 144-163 236 110 3xM16 PN16 6.0

100 104 - 132 1 709.387.020 144-163 236 110 3xM16 PN16 6.0

100 104 - 132 1 .1/4 709.387.021 144-163 236 110 3xM16 PN16 6.0

100 104 - 132 1 .1/2 709.387.022 144-163 236 110 3xM16 PN16 6.0100 104 - 132 2 709.387.023 144-163 236 110 3xM16 PN16 6.0

125 132 - 155 3/4 709.387.024 151-169 264 120 4xM16 PN16* 8.2

125 132 - 155 1 709.387.025 151-169 264 120 4xM16 PN16* 8.2

125 132 - 155 1 .1/4 709.387.026 151-169 264 120 4xM16 PN16* 8.2

125 132 - 155 1 .1/2 709.387.027 151-169 264 120 4xM16 PN16* 8.2

125 132 - 155 2 709.387.028 151-169 264 120 4xM16 PN16* 8.2

150 154 - 192 3/4 709.387.029 149-177 304 120 4xM16 PN16* 11.0

150 154 - 192 1 709.387.030 149-177 304 120 4xM16 PN16* 11.0

150 154 - 192 1 .1/4 709.387.031 149-177 304 120 4xM16 PN16* 11.0

150 154 - 192 1 .1/2 709.387.032 149-177 304 120 4xM16 PN16* 11.0

150 154 - 192 2 709.387.033 149-177 304 120 4xM16 PN16* 11.0

200 198 - 230 3/4 709.387.034 180-207 354 140 4xM20 PN10* 15.9

200 198 - 230 1 709.387.035 180-207 354 140 4xM20 PN10* 15.9

200 198 - 230 1 .1/4 709.387.036 180-207 354 140 4xM20 PN10* 15.9

200 198 - 230 1 .1/2 709.387.037 180-207 354 140 4xM20 PN10*

15.9200 198 - 230 2 709.387.038 180-207 354 140 4xM20 PN10* 15.9

225 232 - 257 3/4 709.387.049 211-242 386 145 6xM20 PN10* 23.7

225 232 - 257 1 709.387.050 211-242 386 145 6xM20 PN10* 23.7

225 232 - 257 1 .1/4 709.387.051 211-242 386 145 6xM20 PN10* 23.7

225 232 - 257 1 .1/2 709.387.052 211-242 386 145 6xM20 PN10* 23.7

225 232 - 257 2 709.387.053 211-242 386 145 6xM20 PN10* 23.7

250 267 - 310 3/4 709.387.039 214-249 432 170 6xM20 PN10* 30.7

250 267 - 310 1 709.387.040 214-249 432 170 6xM20 PN10* 30.7

250 267 - 310 1 .1/4 709.387.041 214-249 432 170 6xM20 PN10* 30.7

250 267 - 310 1 .1/2 709.387.042 214-249 432 170 6xM20 PN10* 30.7

250 267 - 310 2 709.387.043 214-249 432 170 6xM20 PN10* 30.7

300 315 - 356 3/4 709.387.044 219-254 490 170 8xM20 PN10* 34.9

300 315 - 356 1 709.387.045 219-254 490 170 8xM20 PN10* 34.9

300 315 - 356 1 .1/4 709.387.046 219-254 490 170 8xM20 PN10* 34.9

300 315 - 356 1 .1/2 709.387.047 219-254 490 170 8xM20 PN10* 34.9

300 315 - 356 2 709.387.048 219-254 490 170 8xM20 PN10* 34.9

Material:Body & Clamprings: GGG40

Coating:RESICOAT plastic coatinglayer thickness min. 250 micron (GSK)colour: dark red (RAL 3003)Rubber:NBR according to DIN 3535/3

Bolts & nuts:standard steel 8.8, delta magni coated*.

Salt spray test acc. to ASTM B 117 andDIN 50021 750 hoursor stainless steel AISI 304 (A2) teflon coatedWorking pressure:Liquids 10 barGas 4 bar (8 bar on request)

This type can be used for flexible connections (type 3200) and restraint connections (type3207) with a threaded hole for temporary stops, sample taking an pressure testing. You canalso use it as reducer

12

1)Stainless steel Bolts & Nuts onrequest (or see our price list)

2) Poly/Fikser on request * For use on PE-pipes please contact us

7/27/2019 WA2089 MJ3000 Brochure

13/16

GEORG FISCHER 13

Technical specifications

Body : Ductile cast iron GGG40, acc. to DIN1693Pressing ring : Ductile cast iron GGG40, acc. to DIN1693Coating : Resicoat plasti coating, type RT 9000 R4, meet requirements of

WRc, KTW and KIWA for use in drinkingwater pipe linesColour red (RAL 3003)Minimum layer thickness 250 micron, acc. to GSK-register

Varioseal : NBR (Nitril Butadiene Rubber), meets requirements according toDIN 3535/3 (EN682)Temperature: -5C up to +50C

Flekscores : Nakan GPMFiksers : Only for restraint types. Stainless steel quality A4 (316)Bolts and nuts : Standard bolts steel quality 8.8 and nuts steel quality 8

Bolts and nuts coated with Delta magni coating.The combination of these two layers guarantees corrosionresistance according to: Salt spray test DIN 50021: 750h andkesternich test SFW 2.0: 12 cycli

Or bolts and nuts in quality stainless steel A2Bolts and nuts with teflon coating to prevent fretting

Washers : Stainless steel quality A2 (304)Flanges : DN50 to DN150 flange drilling PN10/16

DN200 to DN300 flange drilling PN10 or PN16Pressures : MULTI/JOINT 3000 Family (Non-restraint) PN16

MULTI/JOINT 3007 Family (Restraint) up to PN16 dependingon nominal diameter

Patent nr. : Patented under number 1002514

MULTI/JOINT on polyolefines

We have stainless steel inserts for moststandard used sizes PE (SDR11 and

SDR17,6) ready on stockand other dimensions on request.

Please call us for availability

If you want to use flange adaptors,couplings, and/or end caps of theMULTI/JOINT 3000 family on PE and/or PVC we strongly advise to use inserts.

Technical added valueThe MULTI/JOINT System ismanufactured in accordance with thequality assurance standard ISO 9001and the environmental ISO 14001 .

The entire WAGA range, along with theMULTI/JOINT, meets the EU guidelines

89/106.

The MULTI/JOINT system with theunique Variofleks or Variofiks-ring iscomputer designed (CAD). This providessecurity as well as fully balanced systemdesigned for the required strength.

7/27/2019 WA2089 MJ3000 Brochure

14/16

GEORG FISCHER 14

* Little time needed forassembly

* Dismantling notrequired

* Angular setting ofnominal 8 (for theflexible connections)

* Pressure class PN16* Resicoat plastic

coating* Saving on stock

Tests performed:

- Pressure test : water 25 bar, time: 15 minutes- Vacuum test : - 0.2 bar, time: 120 minutes

- 0.8 bar, time: 120 minutes- Gas test : air 6 bar, time: 10 minutes

for gas the system is tested up to 8 bar working pressure

- Flexibility test : water 20 bar, whereby the coupling and pipe are subjected to themaximum turn angle. Time: 60 minutes

- 1000-hour test : water 20 bar, whereby the fully assembled MULTI/JOINT\ coupling is tested during 1000 hours at 60 C

Because WAGA products meet inter-national standards, such as ISO 2531, EN 545and EN 969, all components of the WAGA system have been marked.

Marking

Body:

/ WAGA

indication of material qualityindication of nominal sizerange for which the coupling is suitablepressure classcharge number or production codePatents Pending or Patented

Clamp rings: / WAGA

indication of nominal size

range for which the coupling is suitablepressure classcharge number or production codePatents Pending or Patented

Varioseal ring: / WAGA

Varioseal

material quality with reference to rele-vant normsrange for which the coupling is suitableproduction datePatents Pending or Patented

TestsThe MULTI/JOINT system with theVariofleks or Variofiks-ring isexhaustively tested according to theinternational standards:- ISO 2531

- EN 545- EN 969

When ordering, the following detailsmust be mentioned:- quantity- type- nominal diameter- quality of bolts and nuts

Ordering procedure

Example: 25 pcs. MULTI/JOINT\

type 3000 non-restraint

DN 100bolts: steel 8.8 coatedNBR

Example code: 709.300.016

Only oneMULTI/JOINT neededper nominal diameter

7/27/2019 WA2089 MJ3000 Brochure

15/16

GEORG FISCHER

7/27/2019 WA2089 MJ3000 Brochure

16/16

Georg Fischer WAGA N.V.

Repair parts WA2060 chapter 3Fittings and equipment for pipe drilling WA2061 chapter 4Additional products and accessories WA2062 chapter 5

Also by Georg Fischer:STEMU ***** ELGEF ***** INSTAFLEX ***** POLYRAC ***** PRIMOFIT ***** SIGNET program

FLEXALINO ***** ELGEF Plus ***** PRO-FIT ***** CONTAIN-IT ***** DIASTAR ***** PE-EASY

Printed on 50% recycledpaper

Couplings WA2075 chapter 2MULTI/JOINT 2000 Family WA2015MULTI/JOINT 3000 Family WA2089

MULTI/JOINT XL-Family WA2068WAGA 500 Family WA2500Draw-Lock Family WA2072ST-system DN200 - DN2800

The WAGA sales programme:

Lange Veenteweg 19 / P.O. Box 290, 8160 AG EPE / NetherlandsTel: +31 (0)578 678378 Fax: +31 (0)578 620848http://www.waga.nl E-mail: [email protected]

Local distributor

wa2089 mj3000 brochure

Documents