walk system led hp op gen3 -...
TRANSCRIPT
16W/m
WALK SYSTEM LED HP OPAL gen.3
LINEAR SYSTEM
INDOOR
This luminaire contains
built-in LED lamps.
The lamps cannot be
changed in the luminaire.
BWLK01_0G07_AA
IP40max
35˚C
Caractéristiques Générales Allgemeine Informationen Informazioni generaliGeneral Information Caractéristiques Générales Allgemeine Informationen Informazioni generali
Material Matériaux Materialien Materiali
Number of light sources Nombre de Source(s) Anzahl Lichtquellen Numero sorgenti lum.
Fixing system Système de #xation Befestigungssystem Sistema di #ssaggio
Driver included Driver intégré Treiber inklusive Driver incluso
Protection class IEC Classe électrique Schutzklasse Classe di isolamento
IP code IP Schutzart Grado IP
IK code IK Schlagfestigkeit (IK) Grado IK
Optic type Optique Optik Ottica
Cable Câble Kabel Cavo
Dimmable Gradable Dimmbar Dimmerabile
European Community mark Marquage CE CE-Zeichen Marchio comunità europea
Lifetime to 80% luminous 'ux Durée vie 80% 'ux lumineux Lebensdauer bis 80% Lichtstrom Durata funzion. (80% 'usso)
Weight (kg) Poids (kg) Gewicht (kg) Peso (Kg)
Electrical Caractéristiques Electriques Elektrische Kenndaten Corrente
Input voltage Tension d' alimentation Netzspannung Tensione di alimentazione
Initial performances Performances initiales Performance iniziali
Initial input power Initial input power Systemleistung Potenza di sistema
Initial luminous 'ux Initial luminous 'ux Lichtstrom Flusso luminoso iniziale
Initial LED luminaire e*cacy Initial LED luminaire e*cacy E*zienz
Init. Corr. Color Temperature* Init. Corr. Color Temperature* Farbtemperatur* Temperatura colore lampada*
CRI IRC CRI CRI
Application conditions Condizioni applicazione
Ambient temperature range Température ambiante Umgebungstemperatur Temperatura ambiente
Anfängliche Leistung
EinsatzbedingungenConditions d'application
E*cienza luminosa iniziale
* Colour temperature could change max. +/- 5%.
ILTI LUCE srl · Lungo Dora P. Colletta, 113/9· 10153 Torino (Italy); tel (39) 011 765 73 01; fax (39) 011 853855; www.iltiluce.com; [email protected] MADE in ITALY_09 - 2016 (F)
BWLK0110G07NAA
BWLK0110G07WAA
BWLK0120G07NAA
BWLK0120G07WAA
BWLK0130G07NAA
BWLK0130G07WAA
(mm)
20
20
10
20
/ 2
02
0 /
30
20
32,5
Accessori (non inclusi):Accessories (not included):
Pro#lo vuoto Kit #ssaggio per cartongessoRecessed pro#le Fixing kit for plasterboard
BWALKITSTAF01
O#set(m) Cone width (m) Illuminance(lx)
Warm White - (BWLK0110G07WAA)
2,3/3,5
4,6 / 7,0
7,0 / 10,5
1,0
2,0
3,0
255
60
25
anodized aluminum - PC
60xLED/m
brackets/springs
NO
III
IP 40
/
opal
1 m
YES
CE
50 000 h
0,455 kg (1 m)
24 V
16 W/m
650 lm/m (3000K)
40 lm/W (3000K)
3000K - 4000 K
>80
max. + 35 °C
LINEAR SYSTEM
INDOOR
WALK SYSTEM LED HP OPAL gen.3 ISTRUZIONI DI MONTAGGIO / INSTALLATION INSTRUCTIONS
BWKL01_0G07_AA
L=1mt (sez. 2x0,5 mm2 )
junction box(not included)
110-240V*
50~60Hz
L
N
LED DriverINPU
T
OU
TPUT
24V
Black
Red
16W/m IP40max
35˚C0,45
kg/m
-L'installazione deve essere fatta da personale quali�cato.
-Installation should be carried out by a suitable quali�ed installer.
-Togliere tensione prima di eseguire operazioni di manutenzione.
-Disconnect main voltage before maintenace operation.
-Tutte le operazioni di cablaggio e manutenzione vanno eseguite con l’interruttore generale in posizione OFF.
-All wiring and maintenance must be performed with the main switch in the OFF position.
GE
NE
RA
LI /
GE
NE
RA
LS
CA
BL
AG
GIO
/ W
IRIN
G
- Collegare l'apparecchio all'alimentatore e poi connettere l'alimentatore al 220V.
- Connect the �tting to the feeder and then connect the feeder at 220V.
-E!ettuare il cablaggio usando un sistema che garantisca almeno il grado IP della lampada.
-Make the wiring using a system that guarantees at least the IP grade of the lamp.
- Secondo la direttiva comunitaria WEEE (Waste Electrical and Electronic Equipment) l’apparecchio non può essere smaltito con i ri�uti indi!erenziati. Deve essere portato nelle strutture locali per lo smaltimento ed il riciclaggio dei prodotti elettronici.
SM
ALT
IME
NTO
/
DIS
PO
SA
L
- In accordance with EU Directive WEEE (Waste Electrical and Electronic Equipment), luminaires must not be disposed of with other household waste. At the end of their life, luminaires must be taken to the appropriate local facility available for the disposal or recycling of electronic products.
-In caso di guasti, previa autorizzazione al reso di ILTI Luce, il prodotto non dovra essere nè aperto nè smontato.
-In case of failure, upon a return authorization of ILTI LUCE, the product will be not neither open nor dismounted.
Alimentatori/ LED Drivers
WALIM60W24V
WALIMLED020/24
WALIMLED100/24
WALIMLED240/24
WALI/DIMM/JOLLY
Codice/Codenon inclusi/not included
Caratteristiche/Speci!cations
20W - 24V
60W - 24V
100W - 24V
240W - 24V
20W - 24V dimm.
* Veri!care la tensione di ingresso supportata dagli alimentatori / Verify the input tension supported from drivers
Esempio di collegamento (connessione in parallelo)Example of connection (parallel connection)
50/60 Hz110V-240V*
WBOKVAR variatore/dimmer 1/10V
WBOKOTDIM dimmer (120W max)*
* necessita di alimentatore/needs driver
+
-
Walk System Led HP gen 3- 1mt
L
N
Driver 20W24V
Striscia LED - LED strip
100 mm=1,6w(1 mt=16W)
(mm)
20
20
10
20
/ 2
02
0 /
30
20
32,5
si consiglia la conservazione delle seguenti istruzioni - we suggest you to keep this copy for your �les
ILTI LUCE srl· Lungo Dora P. Colletta, 113/9· 10153 Torino (Italy); tel (39) 011 765 73 01; fax (39) 011 853855; www.iltiluce.com ; [email protected] MADE in ITALY_09- 2016 (M)
LINEAR SYSTEM
INDOOR
WALK SYSTEM LED HP OPAL gen3 ISTRUZIONI DI MONTAGGIO / INSTALLATION INSTRUCTIONS
- E�ettuare uno scasso lineare di 22,5/25 mm e con una lunghezza pari a quella della lampada.
- Make a linear groove of 22,5/25 mm and with a length equal to the luminaire.
- E�ettuare il cablaggio e posizionare la lampada nello scasso.
- Connect luminaire in parallel and insert them in the groove.
(mm)
30
min
min 22,5max 25
1020/2020/3020
38
22
32,5
BWALKITSTAFO1
Kit !ssaggio per cartongesso (non incluso)
Fixing kit for plasterboard (not included)
Istruzioni di montaggio per cartongesso /
Installation Instructions for plasterboard application
23/25
< 4
0
> 3
- E�ettuare il cablaggio e posizionare la lampada nello scasso.
- Connect luminaire in parallel and insert them in the groove.
- E�ettuare uno scasso lineare di 22,5/25 mm e con una lunghezza pari a quella della lampada.
- Make a linear groove of 22,5/25 mm and with a length equal to the luminaire.
ILTI LUCE srl· Lungo Dora P. Colletta, 113/9· 10153 Torino (Italy); tel (39) 011 765 73 01; fax (39) 011 853855; www.iltiluce.com ; [email protected] MADE in ITALY_09- 2016 (M)
si consiglia la conservazione delle seguenti istruzioni - we suggest you to keep this copy for your !les
WALK SYSTEM LED HP OPAL gen.3 POLAR DIAGRAM
LINEAR SYSTEM
INDOOR
ILTI LUCE srl · Lungo Dora P. Colletta, 113/9· 10153 Torino (Italy); tel (39) 011 765 73 01; fax (39) 011 853855; www.iltiluce.com; [email protected] MADE in ITALY_09 - 2016 (K)
100
200
300
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180 C90 / C270
BWLK0110G07WAA
tabella di riepilogo prodotti/ product overview table
codice/
code
colore/
colour
tipo/
type
potenza/
power
caratteristiche/
speci!cations
fascio ottico/
optic beam
ottica/
optictipo di LED/
LED type
materiale/
material
!ssaggio/
!xation
IP/
IP
BWLK0110G07NAA neutral whiteinterni/
indoor 16W L= 102cm
schermo opale/
opal screen
!ssa/
!xed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
con molle/
with springs40
BWLK01110G07WAA warm whiteinterni/
indoor 16W L= 102cm
schermo opale/
opal screen
!ssa/
!xed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
con molle/
with springs40
BWLK0120G07NAA neutral whiteinterni/
indoor 32W L= 202cm
schermo opale/
opal screen
!ssa/
!xed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
con molle/
with springs40
BWLK0120G07WAA warm whiteinterni/
indoor 32W L= 202cm
schermo opale/
opal screen
!ssa/
!xed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
con molle/
with springs40
BWLK0130G07NAA neutral whiteinterni/
indoor 48W L= 302cm
schermo opale/
opal screen
!ssa/
!xed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
con molle/
with springs40
BWLK0130G07WAA warm whiteinterni/
indoor 48W L= 302cm
schermo opale/
opal screen
!ssa/
!xed
nastro LED alta emissione/
LED strip high emission
alluminio anodizzato/
anodized aluminum
con molle/
with springs40