wall cabinet options

501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

© C R A F T - M A I D K I T C H E N S I N C .

Wall Options

F-1

Wall OptionsWall OptionsIndexIndex

AAdditional Drawer added to Wall Cabinet ...................F-34Additional Shelves .............................................................F-26Add Open Section ...............................................................F-27Add Plate Rack to Wall Cabinet .......................................F-17Attach Center Stile To Door ...........................................F-23Attach Center Stile to Door ...........................................F-22

BBifolding Doors .....................................................................F-75Bin Drawer with Scoop for Fingerwell ...........................F-28

CChange Face .........................................................................F-24Coat Rack-Loose or Attached .......................................F-25Corner Dimensions for Wall Cabinets ...........................F-80Corner Tambour Unit ............................................................F-5Custom Cutout Designs ........................................F-70–F-72

DDecorative Pot & Pan Rack ...............................................F-78Delete Floor and Bottom Rail .........................................F-26Door and Frame on Cabinet End Wall ..............................F-6Door as Cabinet End - Wall ................................................F-6Door on Cabinet End - Wall .................................................F-6Double Beaded Exposed End ...........................................F-24Dust Seal ...............................................................................F-27

EExtend Back Down ..............................................................F-26Extend Cabinet End Up .....................................................F-24Extend Doors Up/Down .....................................................F-25Extended Stile .....................................................................F-29Extended Stile on Shaped Side .....................................F-20Extend Side .................................................................F-15–F-19

Extend Side Down with 1 1/2" Thick Shaped Open Corbel ..............................................................F-19Extend Sides Down - Straight .....................................F-15Extend Sides Down with Hutch Design .....................F-16

Extend Side to Floor ........................................................F-17Extend Sides Back .............................................................F-29Extend Top Rail Up ..............................................................F-24

FFinished Backs - Plain ..........................................................F-7Finished Top - Flush ..............................................................F-8Flipper Door ..............................................................................F-7Flush Bottom .........................................................................F-8Framed Glass Shelf ...........................................................F-42Frameless Lighting Assembly .................................F-10–F-11

GGlass Shelves (Plate Glass) ...........................................F-42

HHalf Circle Wall Unit ............................................................F-75Hanging Pot & Pan Rack ....................................................F-78Hutch Cabinets ....................................................................F-77

IIndividual Half Circle Shelf .................................................F-41Individual Kidney Shaped Shelf ........................................F-41Integral Stile ........................................................................F-28

LLattice Style Wine Rack ......................................................F-9

MMicrowave Cabinet with Extended Shelf ........................F-4Microwave Wall Cabinet .......................................................F-4Mug Rack-Loose ..................................................................F-20Mug Rack for Wall Cabinet ................................................F-13

NNon - Skid Liner ...................................................................F-75

OOpen Bottle Display .............................................................F-9Open Shelf Ends ...................................................................F-13Optional Solid Wood Bead Board (2 Sided) ...............F-79

PPeninsula Wall Cabinet .........................................................F-6Pigeon Hole ...............................................................F-34–F-38

C R A F T - M A I D



F-2

12" Deep Pigeon Hole with Tilt-Down Drawer Front added to European Wall Cabinet ..........F-3513" Deep Pigeon Holewith Tilt-Down Drawer Front added to Traditional & Traditional Plus Wall Cabinet ...................................................F-359" Deep Pigeon Hole for Wall Cabinets .....................F-369" Deep Pigeon Hole with Bin Drawers for Wall Cabinets ..................................................................F-369" Deep Pigeon Hole with Tilt-Down Drawer Front added to Standard Wall Cabinet .....................F-34Full Depth Pigeon hole and Bin Drawer Combination ............................................................F-37Full Depth Pigeon Hole for Wall Cabinets 8" High .....................................................................F-37Letter File Pigeon Hole for Wall Cabinets ................F-38Pigeon Hole - Loose ........................................................F-34

Pipe Chase ............................................................................F-28Plate Groove on Wooden Shelf ........................................F-42Plate Rack or Hutch Ends ................................................F-16Pocket Door .............................................................................F-8Pull-Out TV Swivel Unit .......................................................F-77

QQuarter Circle Wall Unit .....................................................F-74

RRecess Cabinet Side In .....................................................F-25Recessed Bottom ................................................................ F-8Recess Shelf Pins ...............................................................F-20Reduce Stile Width to 3/4" .............................................F-33Return End ..............................................................................F-5Routed Scroll Designs .......................................................F-73

SSkeleton Fronts .....................................................................F-5Slide Mechanical Lift ...........................................................F-21Spice Rack - Wire ................................................................F-41Spice Rack - Wood ..............................................................F-41Stemware Holder ...................................................................F-9Swing-Out Condiment Unit ...............................................F-18

TTambour Unit ...........................................................................F-5Thick Shelves in Place of Standard 3/4" Shelves .....F-26

VValances ....................................................................F-46–F-69

WWainscoting Panel ................................................................F-12

Door and Frame Wainscoting Panel .............................F-12Wall Angled Cabinets ..............................................F-30–F-31

Wall Angled Blind .............................................................F-30Wall Angled Corner ..........................................................F-30Wall Angled Front ............................................................F-30Wall Tapered Back .............................................................F-31Wall Tapered Front ............................................................F-31

Wall Cabinet with Clipped Corner(s) ..............................F-39Wall Cabinet with Open Shelf and Shaped Ends ........F-14Wall Corner Filler ..................................................................F-32Wall Filler ................................................................................F-32Wall Filler - Full Return ......................................................F-33Wall Filler with 6" Return ..................................................F-32Wall Filler with Angled Face with 3" Mounting Returns ....................................................................F-33Wall Pie Cut with Open Shelf and Shaped Ends .........F-15Wide Integral Bottom Rail .................................................F-18Wide Integral Top Rail .........................................................F-18Wood Lazy Susans on Turntable ....................................F-76Wood Support Brackets .......................................F-43–F-45

ZZero Filler ...............................................................................F-29



Wall Options

F-3

Butt DoorsButt DoorsOrdering Code: BUTT Butt doors are available at no additional cost. Center stile is omitted. Must be specified on order.

Finished SidesFinished SidesAdd $43 for each exposed end.

Stain & Seal EndsStain & Seal EndsStandard unfinished cabinet end with no extraordinary material selection or sanding. End will be STAINED (same as cabinetry) with a SEALER top coat. This will serve as a protector against moisture. Code: SLS Price: N/C(Stain & seal left end)Code: SRS Price: N/C(Stain & seal right end)

Base Coat (Paint) EndsBase Coat (Paint) Ends

Similiar to above (for painted kitchen orders) but with the PAINT BASE COAT applied. We will not do any glazing, distressing or other finish options.Code: PLS Price: N/C(Base coat applied to left end)Code: PRS PRICE: N/C(Base coat applied to right end)

Non-Standard Cabinet WidthsNon-Standard Cabinet Widths Ordering Code: SWUse price of next largest cabinet.

Reduced DepthReduced Depth Ordering Code: RDPrice: N/CAny standard wall cabinet may be reduced in depth. Minimum depth is 4".

Reduce HeightReduce HeightOrdering Code:RHUse price of next largest cabinet.Example: 36 1/2"high cabinet--use 39" high price.

WALL CABINET OPTIONS

Increase Depth - WallIncrease Depth - WallOrdering Code: IDW18Increase depth of wall cabinet to 18"= add 15% to cost of standard wall cabinet.

Ordering Code:IDW24Increase depth of wall cabinet to 24"= add 25% to cost of standard wall cabinet.

Increase Height - WallIncrease Height - WallIncrease the height of any standard 48" high wall cabinet (up to 60") Code: IHW51 - Up to 51" -Add 5%Code: IHW54 - Up to 54" -Add 10%Code: IHW57 - Up to 57" -Add 15%Code: IHW60 - Up to 60"-Add 20%

Additional Door - WallAdditional Door - WallOrdering Code: ADW Price: $201 plus additional door premium. Added to any standard wal l cabinet.In European series, all cabinets 24" wide must have 2 doors, all cabinets 48" wide must have 3 doors.

Additional Drawer added to Wall Additional Drawer added to Wall CabinetCabinetOrdering Code: ADWRPrice: $228 plus additional drawer premium. 5 7/8" High frame opening added to Traditional wall cabinet or 6" High drawer added to European wall cabinet.

Drawer Front OnlyDrawer Front OnlyOrdering Code: DFOPrice: $113 plus premiums

Drawer Box OnlyDrawer Box OnlyCode: DBOPrice: $169 (includes slides)

Stain Drawer Box or Pullout (Maple)Stain Drawer Box or Pullout (Maple)Ordering Code: SDPPrice: $54 per drawer

PartitionPartitionOrdering Code: PARPrice: $104Fixed partition inside a cabinet. Supply sketch with dimensions.

Joining CabinetsJoining CabinetsOrdering Code: JCPrice: $166 per jointFor joining two or more units together at factory. Each unit is built separately and then joined. Overall width cannot exceed 84".

Cabinet Built as One UnitCabinet Built as One UnitOrdering Code: CBOAll vertical stiles will be 1 1/2" wide unless otherwise specified.Up to 48" wide - price of combined cabinets plus $166.

Ordering Code: CBOSOver 48" wide (up to 84" wide maximum) - price of combined cabinets plus 25%.

Stained InteriorStained InteriorOrdering Code: SIPrice: $158Available for any wall cabinet. Interior will be stained to match exterior.

Painted InteriorPainted InteriorOrdering Code: PIPrice: $316Available for any wall cabinet. Interior will be painted to match exterior.

Matching Wood InteriorMatching Wood InteriorOrdering Code: MWIAdd 15% to cost of standard wall cabinet.Exterior wood species replacesstandard maple interior.

C R A F T - M A I D



F-4

MICROWAVE CABINET WITH EXTENDED SHELFSpecify cut-out opening. Maximum width of Microwave cut-out is 1 1/2" less than overall cabinet width. Microwave section is maple, with same finish as exterior. Shelf is 3/4" thick plywood with banded edge and extends forward up to 18" deep to support the microwave. Has 1" radius corners. Specify shelf depth.

Ordering Code: MWESE (European)Price: $671 add to price of wall cabinet specified.

Ordering Code: MWEST (Traditional & Traditional Plus)Price: $772 add to price of wall cabinet specified.

Traditional-Minimum stile width in cutout= 1"

MICROWAVE WALL CABINET(for free-standing microwave)

Specify cut-out opening. Maximum width of Microwave cut-out is 1 1/2" less than overall cabinet width. Microwave section is Maple, with same finish as exterior.Ordering Code: MWCFSPrice: $567 add to price of wall cabinet specified.


MICROWAVE WALL CABINET(for microwave with manufacturers trim kit)

Specify cut-out opening. Maximum width of Microwave cut-out is 1 1/2" less than overall cabinet width. Microwave section is Maple, unfinished.

Ordering Code: MWCTKPrice: $265 add to price of wall cabinet specified.


Traditional Cabinet Shown

1" radius on each corner

Note: If matching wood interior is desired - Add 15%.

Specify Maple stained interior

Specify unfinished



Wall Options

F-5

TAMBOUR UNIT Available below any standard wall cabinet. Maximum cabinet width 36". Maximum height of Tambour front 24". Price includes extending height of cabinet to 48" to rest on countertop and a stained birch interior in lower section.

Ordering Code: TUPrice: $1439 added to price of wall cabi-net specified.

Traditional16"

European18"

CORNER TAMBOUR UNITAvailable below any standard wall corner cabinet .Maximum height of Tambour front 24". Price includes extending height of cabinet to 48" to rest on countertop, and a stained birch interior in lower section.

Ordering Code: TUPrice: $1439 added to price of wall cabi-net specified.

24" or 27"

Traditional 32"

European30"

Traditional Height 16"

Traditional Height 32"

European Height 18"

EuropeanHeight 30"

12" European

SKELETON FRONTSAvailable for all standard wall cabinets. European series will have 3/4" thick, 3" returns.

Ordering Code: SFPrice: 50% of price of wall cabinetspecified, plus doorpremiums.

RETURN ENDCan be attached to skeleton fronts. 13" deep. Up to 48" high. Specify left or right.

Ordering Code: WRENDPrice: $104

13" Traditional 12" European13" Traditional

C R A F T - M A I D



F-6

DOOR AS CABINET END - WALLTraditional and Traditional Plus onlyDoor replaces cabinet side. Does not add to width of cabinet . Specify which end receives door.

Ordering Code: DAEWPrice: $301 plus additional door premium(s).

DOOR ON CABINET END - WALLEuropean onlyFixed door applied to cabinet end. Adds 3/4" to cabinet width. Specify which end receives door.

Ordering Code: DOEWPrice: $201 plus additional door premium(s).

DOOR AND FRAME ON CABINET END WALL Traditional and Traditional Plus onlyDoor and frame in place of standard cabinet side. Specify working door or fixed door. If working, specify hinge side. Specify which end receives door.

Ordering Code: DFOEWPrice: $323 plus additional door premium(s).

Working door shown

PENINSULA WALL CABINETDoors on front and back.

Ordering Code: PCABPrice: Add 50% to price of wall cabinet specified.

Top View 12" European or 13" Traditional

13"

12"



Wall Options

F-7

FLIPPER DOORWidth 15" to 36", Height 15" and 18"Door flips up and retracts back into top of cabinet. Flipper door hardware is only available in 2" increments. The flipper door stops 4 1/2" to 6 1/2" short of fully retracting, depending on the depth of the cabinet. The balance of the door is exposed in the open position. No partitions in cabinet. Includes matching wood & finished interior.

Ordering Code: FLIPDPrice: $495 per door

FINISHED BACKS - PLAINPlain finished back (1/2" thick ) Cabinet depth will be 13" deep o. a. (Traditional & Traditional Plus) 12" deep o. a. (European)

Width Code PriceUp to 12" FB12 $11713" to 24" FB24 $14725" to 36" FB36 $17737" to 48" FB48 $20549" to 60" FB60 $30861" to 72" FB72 $338

FINISHED BACK - DOUBLE BEADED (ON 3" CENTERS)Price includes finished back and double beading.Material will be MDF for uniformity of color. (1/2" thick) Cabinet depth will be 13" deep o. a.(Traditional & Traditional Plus) 12" deep o. a. (European)Width Code PriceUp to 12" DBFBW12 $15813" to 24" DBFBW24 $22825" to 36" DBFBW36 $298 37" to 48" DBFBW48 $36749" to 60" DBFBW60 $51061" to 72" DBFBW72 $581

Plain Finished Back

4½" to 6½"

Front 15"

13"

Side View

Note: Florentine Door Style not available

C R A F T - M A I D



F-8

RECESSED BOTTOMFloor is recessed up to give clearance for under-cabinet lighting. Specify clearance needed.In European Series, door height will remain the same. In Traditional & Traditional Plus Series, door will be decreased in height, and cabinet will have a wider bottom rail.Note: Traditional Plus cabinets have a 1" recessed bottom as standard. Traditional cabinets have a 3/4" recessed bottom as standard.

Ordering Code: RBPrice: $104

FINISHED TOP - FLUSHTraditional & Traditional Plus CabinetsAvailable for any standard wall cabinet.Note: European cabinets have a flush top as standard.

Ordering Code: FT Price: $176

Finished Top - Flush

POCKET DOOR

Pocket door hardware is only available in 2" increments. The pocket door stops 4 1/2" to 6 1/2" short of fully retracting, depending on the depth of the cabinet. The balance of the door is exposed in the open position. Pocket door hardware reduces the interior space (from frame opening) 1 1/2" per door without partition, or 3" per door with partition. Partitions required only if adjustable shelves are ordered (partitions are standard unless otherwise specified). Maximum door size - 24" x 48". Center stile is omitted on all two door cabinets. Includesmatching wood & finished interior. Code: POCKDPrice: $599 per door

Note: Florentine Door Style not available

FLUSH BOTTOMTraditional & Traditional Plus CabinetsAvailable for any standard wall cabinet.Note: European cabinets have a flush bottom as standard.

Ordering Code: FB Price: $176

Flush Bottom



Wall Options

F-9

OPEN BOTTLE DISPLAYOpen bottle storage can be added to any standard wall cabinet, up to 36" wide. Includes matching wood interior, stained or painted to match exterior, in open section. Specify all dimensions with a sketch.Note: Open bottle display is built as an integral part of the cabinet. Does not add to the height of the cabinet ordered. 6" minimum height opening for single bottle display; 12" minimum height for double bottle display.

Ordering Code: OBDS (single) Price: $489Ordering Code: OBDD (double)Price: $801

Examples of Lattice style wine racks added

to standard wall cabinets

LATTICE STYLE WINE RACKLattice style wine rack can be added to any standard cabinet. Includes matching wood interior, stained or painted to match exterior, in the wine rack section. Openings in lattice measure 3 3/4" each. Specify all dimensions with a sketch.

Ordering Code: WRPrice: Add $1.66 per square inch to cost of the wall cabinet specified.

STEMWARE HOLDERAvailable under any standard wall cabinet.Wood species and finish of your choice.

Ordering Code: SWHPrice: $20 per linear inch.

Example of open bottle storage

12"W x 32"H shown

36"W x 32"H shown36"W x 32"H shown

Stemware slats are 3 5/8" wide -3/4" between slats

C R A F T - M A I D



F-10

Frameless Lighting Assembly for Wall Cabinets

You can order a seamless light assembly (up to 8ft. in length) for the European (Frameless) cabinet series and mount the lights in this area.To achieve this you need to specify which unfinished cabinet sides are to be recessed up (1-1/2").The floor of the cabinet will also be recessed up the same amount.Then order the appropriate (8ft.) lengths of Light Assembly that is needed (to be in-stalled at jobsite). CODE PRICECODE PRICEExtend Left Side and Recess Floor Up 1½" ELSFU $134Extend Left Side and Recess Floor Up 1½" ELSFU $134Extend Right Side and Recess Floor Up 1½" ERSFU $134Extend Right Side and Recess Floor Up 1½" ERSFU $134Extend Both Sides and Recess Floor Up 1½" EBSFU $178Extend Both Sides and Recess Floor Up 1½" EBSFU $178

In this example:In this example:The left cabinet has it's right unfinished side recessed up (1½") with a full height finished side on the left.The center cabinet has both unfinished sides recessed up. The right cabinet has it's left unfinished side recessed up (1½") with a full height finished side on the right.

Doors remain at original height which do not

require surface mounted door

pulls



Wall Options

F-11

8 ft. Length of Light Assembly w/ Finished Bottom (1" high x 11" deep x 96" 8 ft. Length of Light Assembly w/ Finished Bottom (1" high x 11" deep x 96" long)long)CODE:CODE: LAFB LAFB PRICE:PRICE: $286 per 8 ft Length $286 per 8 ft Length

Frameless Lighting Assembly for Wall Cabinets(continued)

Floor has been

recessed up 1-1/2"

C R A F T - M A I D



F-12

DOOR AND FRAME WAINSCOTING PANELDoors splined in frame Any door over 24" wide or 48" high is charged 2 Door Style Premiums Submit sketch with all dimensions

Specify: • Number of Frame Openings • Height of Bottom Rail • Finished Edges • Overall Size (Width and Height)

Maximum size: 96" Wide x 42" High or 42" Wide x 96" High

Larger sizes require Factory Quote

Ordering Code: DFWCPPrice: $.62 per square inch plus additional door premiums.

For Arched Wainscot Panels-Contact Factory For Quote

WAINSCOTING PANEL Loose doors for application at job site (3/4" thick). Any door over 24" wide or 48" high is charged 2 Door Style Premiums. Submit sketch with all dimensions.

Maximum size: 96" Wide x 42" High or 42" Wide x 96" High

Larger sizes require Factory Quote

Ordering Code: WCPPrice: $.47 per square inch plus additional door premiums.

For Arched Wainscot Panels--Contact Factory For Quote

3/4"



Wall Options

F-13

MUG RACK FOR WALL CABINET

Mug Rack added below wall cabinet. Price includes extending shaped sides down. Includes back plate with pegs for mugs or other hanging items. Open area finished in matching wood species, stained or painted to match cabinet.Note: Adds 7" to height of cabinet.Specify design of shaped ends. See below for profile options.

Ordering Code: MRPrice: Add 25% toprice of cabinet specified.

7"

OPEN SHELF ENDSProfile is included in open shelf cabinet or extended side down price.

CC32CC31

CC41 CC42 CC43

CC30

C R A F T - M A I D



F-14

WALL CABINET WITH OPEN SHELF AND SHAPED ENDS

Flush Shelf

Shelf and towel bar

Shelf unit can be added to any standard wall cabinet. Adds 9" to height of cabinet. Shelf depth will vary with different end types. Price includes shelf unit and shaped ends. Open area finished in matching wood species, stained or painted to match cabinet.Must specify shelf unit and shaped ends desired. See below for options.

Ordering Code: OSLR (Open shelf w/ light rail) Price: Add 30% to price of cabinet specified. OSTB (Open shelf w/ towel bar) OSF (Open shelf flush)

CC410 CC411 CC412

CC413 CC414 CC415

CC416 CC417 CC418

CC419 CC420 CC421

Shelf and light rail

9"



Wall Options

F-15

EXTEND SIDES DOWN - STRAIGHTExtend side of any standard wall cabinet straight down to 60" or less. On Traditional cabinets, 1 1/2" frame stile is extended down to overall height. On European cabinets, 3/4" side is extended down.

Ordering Code: ESDS48(48" or less)Price: $261 per side

Ordering Code: ESDS60(60" or less)Price: $325 per side

WALL PIE CUT WITH OPEN SHELF AND SHAPED ENDSShelf unit can be added to any wall pie cut cabinet. Adds 9" to height of cabinet. Shelf depth will vary with different end types. Price includes shelf unit and shaped ends. Open area finished in matching wood species, stained or painted to match cabinet.Must specify shelf unit and shaped ends desired. See F-14 for options.

Ordering Code: PCOSLR (Open Shelf w/ light rail) Price: Add 30% to price of cabinet specified. PCOSTB (Open shelf w/ towel bar - with vertical partition) PCOSF (Open shelf flush)

9"

C R A F T - M A I D



F-16

CC63CC62CC61

PLATE RACK OR HUTCH ENDSProfile is included in price of Plate Rack or Hutch Cabinet.

CC68CC67CC65

CC64

CC66

Extend side of any standard wall cabinet down to 48" or less. Specify design profile. See below for profile options. Extended side is 3/4" thick.

Ordering Code: ESDHDPrice: $365 per side

Ordering Code:ESDHDDT(1 1/2" Thick)Price: $493 per side



Wall Options

F-17

Note: Dowel spacing for plate rack is 2" on center. (1 5/8" clear space in between)

ADD PLATE RACK TO WALL CABINET

Add a plate rack to wall cabinet. Adds 13 7/8" to height of cabinet. Matching wood interior (in plate rack section) stained or painted to match exterior.

Code: PRACKPrice: $1424

EXTEND SIDE TO FLOORWhen wall cabinet is above refrigerator, side(s) may be extended down to floor. On Traditional cabinets 1 1/2" frame stile is extended down to overall height. Available space inside is 1 1/2" less than the cabinet width. If tapered, extended side is 3/4" thick. On European cabinets, 3/4" side is extended down. Specify depth. Specify straight or tapered and left or right. Up to 24" wide x 84" or 96" high .

Up to 24" wide x 84" highOrdering Code: ESTF84Price: $392

Up to 24" wide x 96" high Ordering Code: ESTF96Price: $466

13 1/2"

C R A F T - M A I D



F-18

WIDE INTEGRAL TOP RAIL - WALL (Up to 4 1/2")

Ordering Code: ITRW Price: $104

WIDE INTEGRAL BOTTOM RAIL - WALL (Up to 4 1/2")

Ordering Code: IBRWPrice: $104

Swing-Out Condiment UnitCondiment Unit is 27 3/8" high, 15 1/4" wide, 6 1/2" deep and is finished in natural birch. Unit swings from left to right. Includes 10 fixed condiment shelves. Two adjustable shelves, reduced in depth, are installed behind the condiment unit on left. Designed to fit 32" Traditional or 30" European high wall cabinets. Available for cabinets 21" to 36" wide. All two door cabinets will have butt doors. Cabinets 30" or wider will include a vertical partition and two adjustable shelves on right.

21" to 24" Wide - No PartitionOrdering Code: SOCNPPrice: $720 (plus cost of the cabinet specified)

27" to 36" Wide - With PartitionOrdering Code: SOCWPPrice: $824 (plus cost of the cabinet specified)

Adj. Shelves Adj.Shelves

Condiment Unit will open when

door is opened to 90

36" W x 32"H shown

12" European13" Traditional



Wall Options

F-19

EXTEND SIDE DOWN WITH 1 1/2" THICK SHAPED OPEN CORBEL

Maximum height and depth is 18". Looks great with "Valance with Cut-Out in Corner" (See Section F)You also might consider Door/Frame on End.

Code: ESDDCPrice: $587 each corner

* Height of Corbel will increase or decrease accordingly if depth is changed to maintain geometric proportion unless otherwise specified.

C R A F T - M A I D



F-20

MUG RACK-LOOSE

Shaker pegs applied to 3/4" Solid Panel. Panel is 5" high with beaded edge profile on both long edges. (Any standard edge profile is available at no additional charge. (See Page P-12)Pegs are spaced 6" apart on center.

Ordering Code: MRLPrice: $69 per foot

6"

Extended Stile on Shaped SideUp to 3" wide.Note: Does not include cost of extended stile.

Ordering Code: ESSSPrice: $261

Recess Shelf Pins

Routed notch in bottom of shelf to recess shelf pins.

Ordering Code: RSPPrice: $34 per shelf

End View of shelf



Wall Options

F-21

Slide Mechanical LiftEuropean Frameless only

The unique feature of this "Mechanical Lift" system allows you to lift the door up and stop it in any position. Can be used with Wood Doors, Frame Doors or Aluminum Doors.

Design Alert: You must allow 13 1/4" clearance from the top of the cabinet to the ceiling.(See below)

Clearancerequirementis 13 1/4"

Shown with door extended up to its maximum height.

See the Kessebohmer Section In the Q-Accoutrements Section for Additional Information.

C R A F T - M A I D



F-22

ATTACH CENTER STILE TO DOOR

(Flush Inset)

Ordering Code: ACSD Price: $96Ord

Frame Rail

Frame S

tile

Door RailDoor Rail

Center stile attached to door



Wall Options

F-23

ATTACH CENTER STILE TO DOOR(Beaded Inset)

Ordering Code:ACSDB Price: $123

ATTACH CENTER STILE TO DOOR(Beaded Inset With False Mitre)

Ordering Code: ACSDBFM Price: $219

Frame S

tile - Beaded

Frame Rail - Beaded

Door Rail Door Rail

Frame Rail - Beaded w/ False Mitre

Frame S

tile - Beaded

Door Rail Door Rail



C R A F T - M A I D



F-24

CHANGE FACEAlter size and location of components.(use additional door and drawer charges if number of doors or drawers change.)

Ordering Code: CFPrice: $104

DOUBLE BEADED EXPOSED END

(INTEGRAL END-WALL)

Code: DBEWPrice: $41 plus cost of finished side (s)

Note: Double Beaded Material will be MDF for uniformity of color.

EXTEND CABINET END UP

Extend cabinet end (up to 4 1/2"") beyond cabinets specific height.

Ordering Code: ESUPrice: $104 per end

Up to 4 1/2

"

Example: W3942 with Modified Door Openings

1 1/2"

1 1/2"

1 1/2"

13 1/4"

21 1/4"

39"

EXTEND TOP RAIL UP

Extend top rail (up to 4 1/2"") beyond cabinets specific height.

Ordering Code: ETRUPrice: $104

Up to 4 1/2"



Wall Options

F-25

RECESS CABINET SIDE IN (UP TO 3/4") Ends of traditional cabinetry can be re-cessed up to 3/4" so the edge of the end will be flush with the cabinet opening. Cabinet box will be less than overall frame dimension.

Ordering Code: RCSPrice: $96 per end

COAT RACK-LOOSE OR ATTACHEDto Interior Cabinet Back

Shaker pegs applied to 3/4" Solid Panel. Panel is 5" high with beaded edge profile on both long edges. (Any standard edge profile is available at no additional charge. (See Page P-7)Pegs are spaced approx. 8" apart.

Ordering Code: CR (Loose or attached)Price: $66 per foot

Approx. 8"

1 1/2" Stile

1 1/2" R

ailCabinet EndUp to 3/4"

EXTEND DOORS UP/DOWN(European only)Doors can be extended up or down beyondcabinet dimensions (up to 6" up or down).Specify amount.

Code: EDUDPrice: $50 per cabinet

Design Tip! It is recommended

that if side is recessedin to accept a panel

during installation that side be recessed in 1/16"

more than thickness of panel. This will allow for a

perfectly fl ush joint.

C R A F T - M A I D



F-26

EXTEND BACK DOWN

Extend the back down on any standard wall cabinet to 48" or less.

Ordering Code: EBDPrice: $201

Design Tip! Design Tip!

Can be used as or in conjunction Can be used as or in conjunction with: Bookcases, Wall Units, with: Bookcases, Wall Units,

Libraries, Entertainment Centers, Libraries, Entertainment Centers, Computer Work Stations, etc.Computer Work Stations, etc.

30"W x 48" H shown

If European-Fixed shelf

Mounting strip

ADDITIONAL SHELVES

(Standard 3/4" Thick)

Additional shelves installed in cabinet. Specifyif fixed or adjustable. If fixed, supply sketch with dimensions.

Ordering Code: ASPrice: $104 each

THICK SHELVES IN PLACE OF STANDARD 3/4" SHELVES

1" thick shelves w/ banded edge...............................Ordering Code: TS1B Price: $45 each

1" thick shelves w/ hardwood profiled edge...........Ordering Code: TS1H Price: $92 each

1 1/2" thick shelves w/ hardwood profiled edge....Ordering Code: TS12H Price: $135 each

DELETE FLOOR AND BOTTOM RAIL

Available on any standard wall cabinet. No bottom rail or floor (open bottom).Double door cabinets must have butt doors.

Code: DFBRPrice: $34



Wall Options

F-27

WALL - ADD OPEN SECTION

Specify width and height of open section. Includes extra floor, matching wood and finish to match exterior. Does not add to overall height of cabinet.

Ordering Code: WOSPrice: Add 30% to cabinet specified.

DUST SEAL

Attached to butt doors as a dust seal. Seal is flexible rubber. Available white, brown or clear.

Code: DSW (White) Price: $27 per doorCode: DSB (Brown)Code: DSC (Clear)

7/16" Wide

C R A F T - M A I D



F-28

PIPE CHASE

Specify all dimensions and furnish a sketch.

Ordering Code: PC Price: $219

INTEGRAL STILETraditional only

Does not add to width of cabinet. Door width will be reduced. Specify overall width of stile (up to 5 1/2" wide)

Left stile widenedOrdering Code: ISWL Price: $86Right stile widenedOrdering Code: ISWRPrice: $86

shown with ISWR

BIN DRAWER WITH SCOOP FOR FINGERWELL

(Reverse Dovetail)As an option, you can order bin drawers with scooped front and reverse dovetail in place of the standard drawer front. Bin drawer will be matching wood and finished the same color as the exterior of the cabinetry. Note: Bin drawers DO NOT have drawer slides. The bottom edge of the drawer slides on the floor of the cabinet.

Code: BDWSPrice: $132 each (Plus wood & finish premiums) Note: Bin drawer front will show exposed dovetails.

Note: If ordering Bin Drawer as a new item, use additional drawer charge ($228 plus $132) plus wood & finish premiums.



Wall Options

F-29

ANGLED WING - WALL

Extend wall cabinet sides at 45o angle. Available up to 18 3/8" wide and up to 48" high.Specify left or right and dimension of wing.

Ordering Code: AWW Price: $208 each

EXTENDED STILETraditional & Traditional Plus only

Attached to cabinet. Specify width (up to 4" wide). Extend stiles over 4", double the price.

Code: ESL (left) Price: $58 ESR (right) Price $58

EXTEND SIDES BACK -WALLEXTEND STANDARD CABINET SIDES BACK AS FOLLOWS:

Up to 24" deepOrder Code: ESB24WPrice: $170 each side

Up to 30" deepOrder Code: ESB30WPrice: $258 each side

Up to 36" deep Order Code: ESB36W.Price: $343 each side

ESR shown

AWW shown on right

ZERO FILLER - WALLEuropean Frameless only

Designed to fit up flush with face of cabinet ends. 2" deep on sides splined togeather with 11/16" finished face flush with banded front edge of the ends. Craft-Maid will supply a loose piece of 3/4" finished material 15" x 15" square to be used as a bottom. The installer will cut to fit behind the "Zero Filler".

Ordering Code: ZEROFWPrice: $248

C R A F T - M A I D



F-30

WALL ANGLED CABINETS Wall Angled BlindWall Angled Blind

Supply sketch with all dimensions. If door is hinged on side with an angle less than 90º a wide integral frame stile will be needed if using concealed hinge.Code: WANGTFCode: WANGABPrice: Add $416 to priceof cabinet specified.

Wall Angled Front Wall Angled Front

Supply sketch with all dimensions. If door is hinged on side with an angle less than 90º a wide integral frame stile will be needed if using concealed hinge.Code: WANGTF Code: WANGAFPrice: Add $1129 to price of cabinet specified. (Must measure cabinet across back to determinecabinet specified)

Wall Angled CornerWall Angled Corner

Supply sketch with all dimensions.

Code: WANGCORPrice: Add $416 to price of cabinet specified.

Finished



Wall Options

F-31

WALL ANGLED CABINETS

Wall Tapered Back Wall Tapered Back

Supply sketch with all dimensions.

Code: WANGTBPrice: Add $416 to priceof cabinet specified.

Wall Tapered FrontWall Tapered Front Supply sketch with all dimensions. If door is hinged on side with an angle less than 90º a wide integral frame stile will be needed if using concealed hinge.

Code: WANGTFPrice: Add $531 to priceof cabinet specified.

C R A F T - M A I D



F-32

WALL CORNER FILLERWidth - Up to 4", Height - Up to 48"Specify width and height. Width of each leg not to exceed 4" wide. Note: This filler cannot be scribed - if necessary can be orderd in three pieces, shipped loose.(must specify)

Ordering Code: WCFPrice: $301

* WALL FILLER WITH 6" RETURNHeight up to 48"Wall filler up to 4" wide with 6" finished returns left or right or both. Includes bottom return (European - 12 7/8" deep; Traditional - 13" deep). Specify width and height. Wall fillers over 4", double the price.

Left ReturnOrdering Code: WFRL Price: $142

Right ReturnOrdering Code: WFRR Price: $142

Left and Right ReturnOrdering Code: WFRLR Price: $184

*Note: If overlay on face is required, add "OL" to the code and add $66. Overlay will be lipped on 3 sides unless otherwise specified (shipped loose). European only.

WALL FILLERTraditional & Traditional Plus onlyWidth - Up to 4", Height - Up to 48"Includes bottom return. Specify Width and Height. Wall fillers over 4" - double the price.

Ordering Code: WF Price: $120

Right Return Left and Right Returns

Left Return

Traditional Only

13"

Note: If overlay on face is required, add "OL" to the code and add $132. Overlay will be lipped on three sides unless otherwise specified (shipped loose). European only.

Traditional shown

13"



Wall Options

F-33

REDUCE STILE WIDTH TO 3/4"This option can be used to join cabinets together, in the field, to create an overall 1 1/2" stile between cabinets. Does not decrease cabinet width. (Door/Drawer will increase in width.) Specify left, right or both.

NOTE: FLUSH INSET MIN. STILE WIDTH IS 3/4" BEADED INSET MIN. STILE WIDTH IS 7/8"

Ordering Code: RSWWL (LEFT) Price: $86

Ordering Code: RSWWR (RIGHT) Price: $86

WALL FILLER WITH 45OANGLED FACE WITH 3" MOUNTING RETURNS Up to 4" wide and 48" high. Includes bottom return and 3" mounting returns left and right. Furnish sketch and specify height.

WALL FILLER - FULL RETURNWidth - Up to 4", Height - Up to 48"

Wall filler up to 4" wide with return. In-cludes bottom return. Specify left or right return.

Ordering Code: WFFRPrice: $219

Note: If overlay on face is required, add "OL" to the code and add $66. Overlay will be lipped on 3 sides unless otherwise specified (shipped loose). European only.

Ordering Code:WFAF Price: $323

12 7/8" European13" Traditional

Top View3"

3"4 1/4"

Bottom Return

13"3"

3" wide shown

1 1/2"

1 1/2"3/4"3/4"

11/2"

C R A F T - M A I D



F-34

ADDITIONAL DRAWER ADDED TO WALL CABINETDoes not increase cabinet height. 5 7/8" high frame opening added to Traditional & Traditional Plus wall cabinet. 6" high drawer added to European wall cabinet.

Ordering Code: ADWRPrice: $228 plus additional drawer premium

9" DEEP PIGEON HOLE WITH TILT-DOWN DRAWER FRONT ADDED TO STANDARD WALL CABINET

Pigeon hole made as an integral part of the wall cabinet. Does not add to overall height of cabinet. Hinged drawer front drops down for access.

Add to the price of wall cabinet specified:

Width Code Price24" TDPH2409 $82927" TDPH2709 $86330" TDPH3009 $89433" TDPH3309 $92536" TDPH3609 $959

PIGEON HOLE - LOOSEWidth 24" to 48"If cabinet end is exposed, Extended Sides Down may be ordered to have a seamless cabinet end.

Width Code Price24" PHL 24 $48627" PHL 27 $52030" PHL 30 $55133" PHL 33 $582 36" PHL 36 $61639" PHL 39 $64742" PHL 42 $68245" PHL 45 $71348" PHL 48 $743

10"

9"8"

9"8"

shown with additional drawers added



Wall Options

F-35

13" DEEP PIGEON HOLEWITH TILT-DOWN DRAWER FRONT ADDED TO TRADITIONAL & TRADITIONAL PLUS WALL CABINET


Add to price of wall cabinet specified:

Width Code Price24" TDPH2413 $85127" TDPH2713 $86330" TDPH3013 $89433" TDPH3313 $92536" TDPD3613 $959

12" DEEP PIGEON HOLE WITH TILT-DOWN DRAWER FRONT ADDED TO EUROPEAN WALL CABINET



Width Code Price24" TDPH2412 $85127" TDPH2712 $86330" TDLPH3012 $89433" TDPH3312 $92536" TDPH3612 $959

13"8"

(inside)

10"

front view

European shown

12"8"

(inside)

10"

front view

C R A F T - M A I D



F-36

9" DEEP PIGEON HOLE FOR WALL CABINETS

Pigeon hole made as an integral part of the wall cabinet. Does not add to overall height of cabinet.


Width Code Price24" PH2409 $55927" PH2709 $59330" PH3009 $62433" PH3309 $65536" PH3609 $68939" PH3909 $72042" PH4209 $75545" PH4509 $78648" PH4809 $815

9" DEEP PIGEON HOLE WITH BIN DRAWERS FOR WALL CABINETS

Pigeon hole made as an integral part of the wall cabinet. Does not add to overall height of cabinet. Two bin drawers are included.


Width Code Price24" PHD2409 $95327" PHD2709 $98730" PHD3009 $101833" PHD3309 $104936" PHD3609 $1083

9" 8"

6½" 6½"Varies10"9"8"



Wall Options

F-37

FULL DEPTH PIGEON HOLE FOR WALL CABINETS, 8" HIGH

Pigeon hole made as an integral part of the wall cabinet. Does not add to overall height of cabinet.


Width Code PriceEuropean24" PH2412 $55927" PH2712 $59330" PH3012 $62433" PH3312 $65536" PH3612 $68939" PH3912 $72042" PH4212 $75545" PH4512 $78648" PH4812 $815Traditional24" PH2413 $55927" PH2713 $59330" PH3013 $62433" PH3313 $65536" PH3613 $68939" PH3913 $72042" PH4213 $75545" PH4513 $78648" PH4813 $815

FULL DEPTH PIGEON HOLEAND BIN DRAWERCOMBINATION Pigeon hole made as an integral part of the wall cabinet. Does not add to overall height of cabinet. Two bin drawers included.


Width Code PriceEuropean24" PHD2412 $95327" PHD2712 $98730" PHD3012 $101833" PHD3312 $104936" PHD3612 $1083Traditional24" PHD2413 $95327" PHD2713 $98730" PHD3013 $101833" PHD3313 $104936" PHD3613 $1083

8"

12" European 13" Traditional

10"

8"

12" European 13" Traditional

6½" 6½"Varies

C R A F T - M A I D



F-38

10"9"

LETTER FILE PIGEON HOLE FOR WALL CABINETS

Pigeon hole made as an integral part of the wall cabinet. Does not add to overall height of cabinet. Letter openings are 4 1/4" high and are spaced equal left to right. Add to price of wall cabinet specified:

Width Code Price24" LFPH2409 $64827" LFPH2709 $72930" LFPH3009 $81033" LFPH3309 $89136" LFPH3609 $97239" LFPH3909 $105342" LFPH4209 $113445" LFPH4509 $121548" LFPH4809 $1296

up to 6"

Illustration of Arched top with Crown Moulding, Keystone Block, Arched Mullion Doors & Solid Doors. Custom curves are also available. Contact Craft-Maid for quote.



Wall Options

F-39

WALL CABINET WITH CLIPPED CORNER(S)Traditional & Traditional Plus and EuropeanAny wall cabinet can be ordered with one or two corners cut away at 45 angle only and finished to match cabinet face. For one corner, face of cabinet will be reduced by 3", for two corners, face is reduced 6" .Specify right or left corner to be cut.

Code: CCL (Left clipped corner) Price: Add $312 for each clipped corner CCR (Right clipped corner) Add to cost of Wall Cabinet specified.

Top View

4¼"3"

10" Traditional 9" European

3"

NOTE: See Accoutrements Section for additional Corner Options, i.e. Reeding, Pilasters, Rosettes, etc.

shown with CCL and CCR

3"

3"European Construction

Top View

C R A F T - M A I D



F-40

WALL CABINET WITH 3" CLIPPED CORNER(S) AND FLUTESAny wall cabinet can be ordered with one or two corners cut away at 45 angle and finished with fluting. Face of cabinet will be reduced by 3" for one corner clipped, 6" for both corners clipped. Specify right or left corner to be cut . Three flutes are standard. Available flute widths are 1/4", 3/8" or 1/2" wide (3/8" is standard, unless otherwise specified). Flutes stop 1 1/2" from top and bottom, and will be evenly spaced, unless otherwise specified. To order additional flutes, specify on order and add $42 per flute.

Code: CCLF (for clipped corner on left with flutes) CCRF (for clipped corner on right with flutes)Price: Add $436 for each clipped corner with flutes Add to cost of Wall Cabinet specified.

Top View

4¼"3"

10" Traditional 9" European

3"

NOTE: See Accoutrements Section for additional Corner Options, i.e. Reeding, Pilasters, Rosettes, etc.

Shown with CCFL and CCFR

3"

3"European Construction

Top View

O



Wall Options

F-41

SPICE RACK - WIREEasy-to-clean white epoxy coated with four storage racks for spices. Mounted on back of door. Available for cabinets 12" to 42" wide. 2 3/8" inside depth, 16 1/2" high. Minimum cabinet height of 24".Specify left or right door on two door cabinets.

Ordering Code: SRWRPrice: $170

SPICE RACK - WOODNatural maple spice rack with five fixed shelves for spices. Mounted on inside of door. Designed for 32" high wall cabinet (European 30"). Specify left or right door on two door cabinets.

Ordering Code: SRWPrice: $370

INDIVIDUAL KIDNEY SHAPED SHELFWIDTH 12"

Kidney shaped shelf with bracket.Specify right or left.

Ordering Code: IKSSPrice: $197 each

INDIVIDUAL HALF CIRCLE SHELF WIDTH 12"Half circle shelf with bracket.

Ordering Code: IHCSPrice: $197 each

Left shown

27 3/8"

3 3/8"

C R A F T - M A I D



F-42

GLASS SHELVES (PLATE GLASS)

Shelves are 3/8" thick. Maximum width 36"

Ordering Code: PGSPrice: $123 per shelf

Plate Grooves--$21 per linear foot

PLATE GROOVE ON WOODEN SHELF

Shelves are 3/4" thick maple plywood, with a banded finished front edge. Specify hardwood edge, if desired. (Hardwood edge is $12 per foot, plus routed edge at $8 per foot.) Plate groove is 1 5/8" from back edge of shelf to center of groove. Groove is 1/4" wide by 1/8" deep.These dimensions are standard unless otherwise specified.

Ordering Code: PGWSPrice: $20 per groove

FRAMED GLASS SHELF

(3/8" Thick Glass Shelf in 3/4" x 1 1/2" Frame)

Maximum width 39"

Code: FGSPrice: $298 (Price includes glass)

3/8" thick glass

3/4" Frame (1 1/2" stiles & rails) routed to accept 3/8" thick glass

Front Edge1 5/8"

Side View of shelf

Side View

Frame

Glass3/4"

1 1/8"

3/8"

3/8"

Revised 7/15/08



Wall Options

F-43

WOOD SUPPORT BRACKETS 3/4” THICK (STANDARD)3/4" plywood with finished front edge.

Size Order Code Price (each)5 x 5 WSB5 $396 x 6 WSB6. $479 x 9 WSB9 $6212 x 12 WSBI2 $8415 x 15 WSB15 $10818 x 18 WSB18 $13221 x 21 WSB21 $157

Standard Support Bracket shown

WOOD SUPPORT BRACKETS1 1/2” DOUBLE THICK (STANDARD)1 1/2" plywood with finished front edge.

Size Order Code Price (each)5 x 5 DTWSB5 $556 x 6 DTWSB6 $669 x 9 DTWSB9 $8612 x 12 DTWSBI2 $11715 x 15 DTWSB15 $15018 x 18 DTWSB18 $18221 x 21 DTWSB21 $215

Standard Support Bracket shown

Size Order Code Price (each)CC21- 3/4" Thick

5 x 5 WSB CC21-5 $10 96 x 6 WSB CC21-6 $1179 x 9 WSB CC21-9 $13212 x 12 WSB CC21-12 $15415 x 15 WSB CC21-15 $18018 x 18 WSB CC21-18 $21721 x 21 WSB CC21-21 $261

CC21 - 11/2" (Double Thick)

5 x 5 DTWSB CC21-5 $1536 x 6 DTWSB CC21-6 $1659 x 9 DTWSB CC21-9 $18512 x 12 DTWSB CC21-12 $21615 x 15 DTWSB CC21-15 $25 8 18 x 18 DTWSB CC21-18 $31121 x 21 DTWSB CC21-21 $373

ADDITIONAL WOODEN SUPPORT BRACKETSWooden support brackets available in either 3/4" or 1 1/2” plywood with finished front edge. Specify design profile by code.

CC21

C R A F T - M A I D



F-44

Size Order Code Price (each)CC23 - 3/4" Thick

5 x 5 WSB CC23-5 $1096 x 6 WSB CC23-6 $1179 x 9 WSB CC23-9 $13212 x 12 WSB CC23-12 $15415 x 15 WSB CC23-15 $18018 x 18 WSB CC23-18 $21721 x 21 WSB CC23-21 $261

CC23 - 1 1/2" (Double Thick)

5 x 5 DTWSB CC23-5 $15 36 x 6 DTWSB CC23-6 $1659 x 9 DTWSB CC23-9 $18512 x 12 DTWSB CC23-12 $21615 x 15 DTWSB CC23-15 $25 818 x 18 DTWSB CC23-18 $311 21 x 21 DTWSB CC23-21 $373

CC23

ADDITIONAL WOODEN SUPPORT BRACKETSWooden support brackets available in either 3/4" or 1 1/2” plywood with finished front edge. Specify design profile by code.



CC22 - 1 1/2" (Double Thick)

5 x 5 DTWSB CC22-5 $15 36 x 6 DTWSB CC22-6 $1659 x 9 DTWSB CC22-9 $18512 x 12 DTWSB CC22-12 $21615 x 15 DTWSB CC22-15 $25 818 x 18 DTWSB CC22-18 $31121 x 21 DTWSB CC22-21 $373

CC22



Wall Options

F-45

Size Order Code Price (each)CC31- 3/4" Thick


CC31- 1 1/2" (Double Thick)

5 x 5 DTWSB CC31-5 $1536 x 6 DTWSB CC31-6 $1659 x 9 DTWSB CC31-9 $18512 x 12 DTWSB CC31-12 $21615 x 15 DTWSB CC31-15 $25818 x 18 DTWSB CC31-18 $31121 x 21 DTWSB CC31-21 $373



CC24 - 1½" (Double Thick)

5 x 5 DTWSB CC24-5 $1536 x 6 DTWSB CC24-6 $1659 x 9 DTWSB CC24-9 $18512 x 12 DTWSB CC24-12 $21615 x 15 DTWSB CC24-15 $25 818 x 18 DTWSB CC24-18 $31121 x 21 DTWSB CC24-21 $373

ADDITIONAL WOODEN SUPPORT BRACKETSWooden support brackets available in either 3/4" or 1 1/2" plywood with finished front edge. Specify design profile by code.

CC31

CC24

C R A F T - M A I D



F-46

VALANCE AS PART OF CABINET (I.E. VALANCE AS TOP RAIL) THE EDGE PROFILE WILL HAVE A DROP SHOULDER ROUT STANDARD UNLESS OTHERWISE SPECIFIED. EXCEPT CC51 WHICH IS ONLY AVAILABLE WITH SQUARE EDGE. ROUT WILL STOP 1/2" FRAME INSIDE EDGES OF FRAME STYLES. (EXCEPTIONS ARE SHAKER, COLONIAL, LEXINGTON, AND EUROPEAN SERIES DOORS WHICH WILL HAVE A SQUARE EDGE UNLESS OTHERWISE SPECIFIED.)

VALANCE AS BOTTOM RAIL VALANCE MADE AS AN INTEGRAL PART OF THE CABINET. DOES NOT ADD TO THE CABINET HEIGHT. YOU MAY WANT TO CONSIDER: HAND CARVINGS OR ENKEBOLL APPLIQUES (SEE ACCOUTREMENT SECTION)

VALANCE AS TOP RAILTRADITIONAL & TRADITIONAL PLUS: VALANCE MADE AS AN INTEGRAL PART OF THE FRAME.EUROPEAN: SPECIFY IF THE VALANCE IS TO BE MOUNTED BETWEEN SIDES OR ON THE FACE OF THE CABINET.

NOTE: IF BEADED INSET, DROP SHOULDER EDGE PROFILE IS STANDARD ON BOTTOM EDGE OF VALANCE.IF BEADED BOTTOM EDGE OF VALANCE IS DESIRED, SEE F-47.

LOOSE VALANCEALL LOOSE VALANCES WILL HAVE SQUARE EDGES UNLESS OTHERWISE SPECIFIED. EDGE PROFILES ARE AVAILABLE AS AN OPTION. (SEE LIGHT VALANCES IN MOLDING SECTION FOR PROFILE OPTIONS.)

NOTE: IF ORDERING LOOSE VALANCE OVERSIZE TO BE TRIMMED IN FIELD, SPECIFY OVERALL SIZE AND TRIMMED DIMENSIONS. THE FACTORY WILL ADD A TRIMABLE AREA TO THE VALENCE TO RETAIN THE PROPER PROFILE AFTER BEING CUT TO FINISHED SIZE.

NOTE: CORNER CUTOUTS AND SCROLL ROUTS REQUIRE A 8 1/2" HIGH VALANCE.

SPECIAL VALANCESCRAFT - MAID WILL DO CUSTOM CUTOUT SPACES IF REQUESTED. SEND A SKETCH TO THE FACTORY WITH ALL DIMENSIONS FOR A QUOTE.

NOTE : IF VALANCE HEIGHT IS CHANGED FROM 4 1/2", 6" OR 8 1/2" A SPECIAL SET-UP CHARGE MAY BE INCURRED IF ANY OF OUR STANDARD SHAPES NEED TO BE MODIFIED TO FIT CUSTOM HEIGHT.

SEE PAGES F-47 THRU F-73 FOR VALANCE DESIGNS AND OPTIONS.



Wall Options

F-47

BEAD BOTTOM EDGE OF VALANCEBEAD BOTTOM EDGE OF VALANCE AS TOP RAIL.HEIGHT OF VALANCE IS VARIABLE DEPENDING ON YOUR VALANCE CHOICE.(MUST ADD COST OF VALANCE)

Ordering Code: BBEV Price: $618

VALANCE WITH OPEN CUTOUT IN CORNERFOR OPEN CABINETS (WALL, BASE OR TALLER). AVAILABLE IN FLUSH OR BEADED INSET SERIES.MINIMUM CORNER SIZE IS 8" X 8" AS SHOWN. MINIMUM CABINET WIDTH 21".

Code: VALOF (Flush) Price: $699 (Price includes both corners)Code: VALOB (Beaded) Price: $814 (Price includes both corners)

8"

8"

open

1 1/2"

1 1/2"

C R A F T - M A I D



F-48

4 1/2" HIGH VALANCESCODE : SEE INDIVIDUAL DRAWINGS FOR CODE#PRICE : VALANCE AS TOP RAIL $284 (UP TO 48" WIDE)PRICE : VALANCE AS BOTTOM RAIL $284 (UP TO 48" WIDE)PRICE : VALANCE LOOSE $284 (UP TO 48" WIDE)



Wall Options

F-49


C R A F T - M A I D



F-50




Wall Options

F-51


VALANCE LOOSE CODE = VAL4CC59

C R A F T - M A I D



F-52




Wall Options

F-53


C R A F T - M A I D



F-54




Wall Options

F-55

6" HIGH VALANCESCODE : SEE INDIVIDUAL DRAWINGS FOR CODE#PRICE : VALANCE AS TOP RAIL $299 (UP TO 48" WIDE)PRICE : VALANCE AS BOTTOM RAIL $299 (UP TO 48" WIDE)PRICE : VALANCE LOOSE $299 (UP TO 48" WIDE)

C R A F T - M A I D



F-56




Wall Options

F-57


C R A F T - M A I D



F-58





Wall Options

F-59


C R A F T - M A I D



F-60




Wall Options

F-61


C R A F T - M A I D



F-62




Wall Options

F-63


C R A F T - M A I D



F-64




Wall Options

F-65



C R A F T - M A I D



F-66




Wall Options

F-67


C R A F T - M A I D



F-68




Wall Options

F-69

4 1/2" HIGH STRAIGHT VALANCE AS TOP RAIL

CODE : VTR4STPRICE = $104

4 1/2" HIGH STRAIGHT VALANCE LOOSE

CODE : VAL4STPRICE = $104

6" HIGH STRAIGHT VALANCE AS TOP RAIL


6" HIGH STRAIGHT VALANCE LOOSE


8 1/2" HIGH STRAIGHT VALANCE AS TOP RAIL


8 1/2" HIGH STRAIGHT VALANCE LOOSE


C R A F T - M A I D



F-70

CLOVER CUTOUT

CODE : CCOPRICE = $177 PER CUTOUT

STAR CUTOUT

CODE : SCOPRICE = $177 PER CUTOUT

FLEUR-DE-LIS CUT-OUT

CODE : FDLCOPRICE = $177 PER CUTOUT

CUSTOM CUTOUT DESIGNSMAY BE USED ON SKIRT OF HOOD, SOLID PANEL AS TOP RAIL OF SINK BASE, VALANCE AS TOP RAIL OF CABINET, VALANCE ACROSS WINDOW, ETC. STANDARD DESIGNS ARE SHOWN. FOR CUSTOM DESIGNS PLEASE FAX OR E-MAIL A SCALED DRAWING OF DESIGN FOR A QUOTE. DEPENDING ON SHAPE OF VALANCE THE CUTOUTS AND SCROLLS DESIGN WILL ONLY FIT ON 8 1/2" HIGH VALANCES. IF IN QUESTION, CONTACT FACTORY.



Wall Options

F-71

HEART CUTOUT

CODE : HCOPRICE = $177 PER CUTOUT

MOON CUTOUT

CODE : MCOPRICE = $177 PER CUTOUT

FLOWER CUTOUT

CODE : FCOPRICE = $177 PER CUTOUT

CUSTOM CUTOUT DESIGNSMAY BE USED ON SKIRT OF HOOD, SOLID PANEL AS TOP RAIL OF SINK BASE, VALANCE AS TOP RAIL OF CABINET, VALANCE ACROSS WINDOW, ETC. STANDARD DESIGNS ARE SHOWN. FOR CUSTOM DESIGNS PLEASE FAX OR E-MAIL A SCALED DRAWING OF DESIGN FOR A QUOTE. DEPENDING ON SHAPE OF VALANCE THE CUTOUTS AND SCROLLS DESIGN WILL ONLY FIT ON 8 1/2" HIGH VALANCES. IN IN QUESTION, CONTACT FACTORY.

C R A F T - M A I D



F-72

FISHTAIL CUTOUT

CODE : FTCOPRICE = $288 PER FOOT OF CUTOUT

CUSTOM CUTOUT DESIGNSMAY BE USED ON SKIRT OF HOOD, SOLID PANEL AS TOP RAIL OF SINK BASE, VALANCE AS TOP RAIL OF CABINET, VALANCE ACROSS WINDOW, ETC. STANDARD DESIGNS ARE SHOWN. FOR CUSTOM DESIGNS PLEASE FAX OR E-MAIL A SCALED DRAWING OF DESIGN FOR A QUOTE. DEPENDING ON SHAPE OF VALANCE THE CUTOUTS AND SCROLLS DESIGN WILL ONLY FIT ON 8 1/2" HIGH VALANCES. IN IN QUESTION, CONTACT FACTORY.



Wall Options

F-73

FLORAL DESIGN STRAIGHT SCROLLCODE : FDSRDPRICE = $282 EACH

CORNER SCROLLCODE : CSRDPRICE = $166 EACH

FLORAL DESIGN CORNER SCROLL CODE : FDCRDPRICE = $282 EACH

ROUTED SCROLL DESIGNSMAY BE USED ON SKIRT OF HOOD, SOLID PANEL AS TOP RAIL OF SINK BASE, VALANCE AS TOP RAIL OF CABINET, VALANCE ACROSS WINDOW, ETC. STANDARD DESIGNS ARE SHOWN. FOR CUSTOM DESIGNS PLEASE FAX OR E-MAIL A SCALED DRAWING OF DESIGN FOR A QUOTE. DEPENDING ON SHAPE OF VALANCE THE CUTOUTS AND SCROLLS DESIGN WILL ONLY FIT ON 8 1/2" HIGH VALANCES. IN IN QUESTION, CONTACT FACTORY.

C R A F T - M A I D



F-74

QUARTER CIRCLE WALL UNIT Height 30" to 36"3/4" ConstructionWidth 6" to 12". Units 30" to 36" high have three shelves. Traditional & Traditional Plus depth is 13", European is 12". Specify left or right. Finish back - Add $42

Width Code Price30" High-European only

6" QCW630 $3197" QCW730 $3328" QCW830 $34310" QCW1030 $36612" QCW1230 $37732" High-Traditional & Traditional Plus only

6" QCW632 $3197" QCW732 $3328" QCW832 $34310" QCW1032 $36612" QCW1232 $37733" High-European only

6" QCW633 $3937" QCW733 $4098" QCW833 $42310" QCW1033 $45112" QCW1233 $46436" High

6" QCW636 $4677" QCW736 $4868" QCW836 $50210" QCW1036 $53612" QCW1236 $552

QUARTER CIRCLE WALL UNITHeight 39" to 48"3/4" ConstructionWidth 6" to 12" . Units 39" to 48" high have four shelves. Traditional & Traditional Plus depth is 13", European is 12". Specify left or right. Finish back - Add $42

Width Code Price39" High

6" QCW639 $5417" QCW739 $5638" QCW839 $58210" QCW1039 $62112" QCS1239 $64042" High



6" QCW648 $7367" QCW748 $7678" QCW848 $79210" QCW1048 $84612" QCW1248 $871

Right shown

13" Traditional & Traditional Plus12" European

6" to 12"

39" to

48"

Right shown

13" Traditional & Traditional Plus 6" to 12"

30" to

36"



Wall Options

F-75

HALF CIRCLE WALL UNITHeight 30" to 48"3/4" Construction

Traditional & Traditional Plus width is 13", European width is 12".Units 30" to 36" high have three shelves. Units 39" to 48" high have four shelves.Finish back - Add $42

Height Code Price 30" European only30" HCW30 $266 32" Traditional & Traditional Plus only32" HCW32 $266 33" European only33" HCW33 $32836" HCW36 $39039" HCW39 $45242" HCW42 $51045" HCW45 $56348" HCW48 $614

30" to

36"

12" European 13" Traditional & Traditional Plus

12" European13" Traditional & Traditional Plus

39" to

48"

BIFOLDING DOORS (Soss Hinges)Available in all door styles (4/4 or 5/4)Available in all series--(Traditional, Traditional Plus, Including Inset, & European)Soss hinges between doors-Standard hinges left and right.Maximum Width of door: 17"Maximum Height of door: 48"

Code: BIFDPrice: $150 per pair (Plus door premiums)

Top View

Soss Hinges Soss Hinges

NON-SKID LINERNon skid rubber mat, cut to size and installed on floor of drawers or pullouts.Ordering Code: NSLPrice: $120 per drawer or pullout

C R A F T - M A I D



F-76

WOOD LAZY SUSANS ON TURNTABLEFor corner cabinet 24" deep and 27" deep

Wood Lazy Susans mounted to the floor or on an adjustable shelf of a WC24 corner cabinet or WC27 corner cabinet. (20" diameter "D" shaped shelf). Lazy Susan hardware has stop position.Shelves are 1/2" thick plywood. Wood lip is 1/2" thick x 2 3/8" high. The band is steam bent, glued, and doweled together to form a continuous lip.

Ordering Code: LSSW24Price: $275 per Lazy Susan



Wall Options

F-77

HUTCH CABINETSTraditional & Traditional Plus OnlyAny standard 32" high wall cabinet may be used as a Hutch Cabinet.Includes extending back and sides down to 48", fixed shelf and finished lower section. Open section is finished in same wood and stain as exterior.See page F-14 for complete list of hutch end profiles.

Ordering Code: HCPrice: Add 50% to the price of standard 32" wall cabinet

PULL-OUT TV SWIVEL UNIT Natural Maple Shelf Unit slides out and swivels 360 DEGREES. Weight limit is 132 pounds.Minimum cabinet width is 18”Minimum cabinet depth is 17”All two door cabinets will have butt doors.Note: As a standard, the TV shelf is made 4" less than the inside dimension (width) of the cabinet. However, if you can provide the dimensions of your TV, the shelf can be custom-made to fit the TV.

Ordering Code: POTVPrice: $884 You may want to consider:

Increased DepthStained InteriorMatching wood InteriorPocket Doors (See page 8)

48"

13"

32"

16"

C R A F T - M A I D



F-78

Top view

1 1/8"

1" Dowels spacedapprox. 4" apart

Finial

Cross S

ectio

n

5"13"

4"

Side view

HANGING POT & PAN RACKStandard size is 20" deep x 43" wide. If a dif-ferent size is required, submit a sketch with all dimensions for a quote. Installed from the ceil-ing with decorative chain (supplied by others).

Code: HPPRPrice: $2762

Decorative Pot & Pan RackStandard size is 20" deep x 43" wide. If a dif-ferent size is required, submit a sketch with all dimensions for a quote. Installed from ceiling with decorative chain (supplied by others).Note: See Section L for cutouts & decorative routed scroll designs that may be added at ad-ditional cost.

Code: DPPRPrice: $2255



Wall Options

F-79

OPTIONAL SOLID WOOD BEAD BOARD (2 SIDED)

Bead Board is 3/8" thick solid wood, 3 1/4" wide overall. Available for Beaded finished sides (exterior) and finished backs (interior or exterior). Does not add to overall width of cabinet.

Note: Bead Board will expand and contract over time, causing the joints to open and the finish to crack. Therefore Craft-Maid will not Warrant Bead Board when used in this manner.

Craft Maid recommends our standard Beaded material of MDF, which is very stable and does carry our standard warranty.

Side A has bead on 1 1/2" centers - Side B has bead on 3" centers Specify "Finish Side A" or "Finish Side B"

Code: Price: BBBIW (Bead board back - Interior wall) $304 per linear foot BBBEW (Bead board back - Exterior wall) $381 per linear foot BBSEW (Bead board side - exterior wall) $439 per side

C R A F T - M A I D



F-80

21 1/2”

23 5/8”

25 3/4”

27 7/8”30”32 1/8"

34 1/4"

36 3/8"

38 1/2"

40 3/8"

42 1/2"

44 5/8"

46 3/4"

48 7/8"

+2 1/8"

Corner Dimensions for Wall Cabinets

Cabinet FaceMeasurement

11 3/8”15 5/8”19 7/8”24 1/8”28 3/8”32 5/8”36 7/8”41 1/8”45 3/8”49 5/8”53 7/8”58 1/8”62 3/4”66 5/8”+4 1/4”

Cabinet Depth= 13”

21”24”27”30”33”36”39”42”45”48”51”54”57”60”

21 1

/2”

23 5

/8”

25 3

/4”

27 7

/8”

30”

32 1

/8"

34 1

/4"

36 3

/8"

38 1

/2"

40 3

/8"

42 1

/2"

44 5

/8"

46 3

/4"

48 7

/8"

+2 1

/8"

Cabinet FaceMeasurement

12”15”18”21”24”27”30”33”36"39"42"45"48"51"

Cabinet Depth = 13"

Wall Li

neWall Line

21”

24”

27”

30”

33”

36”

39”

42”

45”

48”

51”

54”

57”

60”

Wall Li

ne Wall Line

wall cabinet options

Documents

f cabinet

f door

f sides

f backs

f plate rack

f lighting assembly

cabinet end wall

cabinet end wall