Floor covering

NASAHI AAC floor panel

Floor penetration

Blocking for panel support

Timber or steel joist @ 450 or 600mm centres maximum

Blocking forpanel support

Walsc AAC Flooring System Overview

SYSTEM FEATURES

Fast and cost effective construction;

High-performance lightweight flooring system;

NCC (BCA) complaint;

Premium solid, comfortable and quiet;

Great thermal performance.

Note: For wall system specification, please refer to “Walsc AAC Flooring System - Design and Installation Guide” which is available online www.walsc.com.au.

AAC Flooring System

for Low-rise Residential Buildings

1 2

3 4

5

6

Project Portfolio

1. VISUM Apartments, Auburn Builder: Loulach Developments Application: High-rise Facade and Internal Wall.2. Hope Gardens, Penrith Builder: Dynamic Projects Application: High-rise Facade and Internal Wall.3. ZEN Apartments, Wentworth Point Builder: Billbergia Application: High-rise Internal Wall.4. COMO Apartments, Homebush Builder: City Built Group Application: High-rise Facade Wall.5. The Jewel Apartments, Roselands Builder: ALAND Developments Application: High-rise Facade and Internal Wall.6. Belmore 510 Apartments, Belmore Builder: ESA Builders Application: High-rise Internal Wall.

Walsc Australia Pty LtdABN: 52 160 666 366 D3, 27 Fariola Street, Silverwater, NSW 2128Tel: 1300 957 566 Fax: 02 8246 3486

Technical Support: 1300 957 566 info@walsc.com.au

www.walsc.com.auThe latest version of this manual is available at walsc.com.au

WALSC®

AAC WALL SYSTEMS

Distribution Network available in NSW, SA, QLD, and other states in Australia.

Exclusively Distributed (NSW) by:

Hume Plasterboard Pty LtdABN: 70 101 562 27086 Ferndell Street, South Granville NSW 2142

For Sales and Service Contact13 4863info@humeplaster.com.au

Insulation

13mm plasterboard lining(min. density 8.4kg/m²)

Timber / Steel structural frame

Option 2:

Base Details*:Option 1:

continuous steel channel 76x28x0.75mm fixed with masonry anchors at 600mm max. ctrs

aluminium wall brackets.

*See Figure 11.2 (a) (b) and (c).

75mm NASAHI AAC Panel

13mm plasterboard lining (min. density 8.4kg/m²)

Aluminium wall brackets

Full Support & Services

We offer sales services, technical advice and supportto meet the clients’ satisfaction

Full Support

Environmentally Friendly

Eco-friendly

Less greenhouse gas emissionsthan the comparative products,concrete and brick

Lightweight & Durability

NASAHI AAC Panel weight 1/4 the weight of bricks 1/5 of standard concreteAmbient Density 600kg/m³

Light Weight

Termite & Pest Resistance

NASAHI AAC Panel will not be damaged by termites or other insects due to its unique structure and natural featuresTermite Resistance

Moisture Resistance

NASAHI AAC Panel effectively prevent water from penetrating through it

Moisture Resistance

Acoustic Insulation

NASAHI AAC Panel 75 mm panel only:Rw 35 dB AAC Wall Systems:RW + Ctr > 50 dB

Thermal Insulation

NASAHI AAC Panel (75 mm) R-Values 0.52 over 4×betterthan 110mm Brick (0.12)

Fire Resistance

75mm Panel only: FRL -/90/9075mm Panel (T&G, caged mesh): FRL -/120/120100mm Panel only: FRL -/240/240Fire Resistance

Note: For wall system specification, please refer to “Walsc High-rise Internal Wall Systems - Design and Installation Guide” which is available online www.walsc.com.au.

Walsc High-rise Facade Wall System Overview

Walsc Low-rise Inter-Tenancy Wall System Overview

Walsc External Wall Cladding System Overview

Roof framing

75mm NASAHI AAC Panel

Structural wall frame

Upper floor sheeting

Continuous horizontal steel batten

Horizontal control joint

Upper floor framing

Walsc approved coating system

Concrete slab

Flashing and damp-proof course

Building wrap/sarking as specified

Internal Cavity Wall System

for Apartment and Commercial Buildings

High-rise Facade Wall System

for Apartment and Commercial Buildings

Inter-Tenancy Wall System

for Multi-Residential Buildings

External Wall Cladding System

for Multi-Residential Buildings

SYSTEM FEATURES

Rw+Ctr > 50 for walls separating Sole Occupancy Units (SOUs);

Discontinuous construction therefore can separate wet areas, lift shaft, plant rooms, etc.;

Wall system achieve FRL -/120/120 with 13mm fire-rated plasterboard linings on both sides;

75mm Square Edge panel only achieve FRL -/90/90 mins;

100mm Square Edge panel only achieve FRL -/240/240 mins;

75mm Tongue and Groove caged reinforced panel achieve FRL -/120/120 mins.

Concrete soffit

15m

m m

ax

13 mm standard plasterboardlining minimum mass 8.5kg/m²

75 mm NASAHI AAC Panel

As specified

Concrete slab

Concrete soffit

Ceiling system

or 6mm FC in the wet area.

P50 shadow-linestopping angle

A Typical Walsc Internal Cavity Wall System Overview

SYSTEM FEATURES

Designed in accordance with AS5146-2016;

NCC (BCA) complaint;

Achieve FRL 90/90/90 mins;

Moisture resistance;

Energy efficiency;

Fast construction.

SYSTEM FEATURES

Meet the NCC (BCA) requirements;

Achieve FRL 90/90/90 mins;

Better acoustic performance;

Energy efficiency;

Fast and cost effective construction.

SYSTEM FEATURES

Green and premium wall cladding material

Stylish finishes with choices of coating system

Energy efficiency

Fast and cost effective construction

Waterproofing/Moisture resistance

Termite resistance

Walsc approvedcoating system

Horizontal control joint

75 mm NASAHI AAC Panel

Structural frame

Steel top hat/batten

Building wrap/sarking as specified

Steel shelf anglefixed to slab edge

Internal lining

Rebated slab edge

Sealing tape

Base flashing

Note: For wall system specification, please refer to “Walsc High-rise Facade Wall System - Design and Installation Guide” which is available online www.walsc.com.au.

Note: For wall system specification, please refer to “Walsc Low-rise Inter-Tenancy Wall System - Design and Installation Guide” which is available online www.walsc.com.au.

Note: For wall system specification, please refer to “Walsc Low-rise External Wall Cladding System - Design and Installation Guide” which is available online www.walsc.com.au.

Steel top hat/batten

Concrete slab

Damp proof course and thin bed mortar

The Walsc Inter-Tenancy Discontinuous Wall System consists of NASAHI AAC Panels installed vertically and fixed to the structural frame on each side using aluminium brackets as shown. Walsc AAC Panel Adhesive is applied to the vertical edges where there is an adjoining panel.

√ CodeMark accredited

√ In compliance with AS 5146

√ NCC/BCA compliant

√ Tested for Fire/Acoustic/Weatherproofing

√ Outstanding performance

√ Technical support

CodeMark Certification:

(CM40126)

√ CodeMark accredited

√ In compliance with AS 5146

√ NCC/BCA compliant

√ Tested for Fire/Acoustic/Weatherproofing

√ Outstanding performance

√ Technical support

CodeMark Certification:

(CM40126)

√ CodeMark accredited

√ In compliance with AS 5146

√ NCC/BCA compliant

√ Tested for Fire/Acoustic/Weatherproofing

√ Outstanding performance

√ Technical support

CodeMark Certification:

(CM40126)

√ CodeMark accredited

√ In compliance with AS 5146

√ NCC/BCA compliant

√ Tested for Fire/Acoustic/Weatherproofing

√ Outstanding performance

√ Technical support

CodeMark Certification:

(CM40126)

Project Portfolio

Product Benefits NASAHI AAC Panel is quick and easy to install, cost efficient objective can be achieved

Cost Savings

Cost SavingsShortened Construction Period

Time Saving

NASAHI AAC Panel enables labourers install fast and promotes the efficiency during the construction time of the project

Product Benefits