waste management awareness handbook - hseland
TRANSCRIPT
Waste Management Awareness Handbook 1
HEALTH SERVICE EXECUTIVE
Waste ManagementAwareness Handbook
2011
2
Document Document William RobanReference Number HSQE-WM3 Developed by Estates Directorate
Dublin Mid-Leinster
Revision Number Rev A Document Estates Head ofApproved by Health Safety, Quality
and Environment
Approval Date February 2011 Responsible for All HSE EmployeesImplementation
Revision Date 5 Years Responsible for Estates Manager forEvaluation and Environment and
Audit Waste
Waste Management Awareness Handbook 2011
3
Introduction...................................................................................................................6
Scope ...........................................................................................................................7
1. Health Service Executive (HSE) Waste Policy .............................................................8
2. National Legislation .....................................................................................................9
2.1 Waste Management Statutory Requirements ......................................................10
3. Responsibility of Holder of Waste ..............................................................................12
4. Prevention and Minimisation ......................................................................................13
4.1 Policies and Targets .............................................................................................13
4.2 Details of Prevention/Minimisation/Reuse............................................................14
4.3 Good Practice Notes from C&AG Value For Money Report, 2005.......................15
4.4 Green Procurement .............................................................................................15
4.4.1 Life Cycle Analysis (LCA) .............................................................................15
4.4.2 Green Procurement ......................................................................................15
4.4.3 Producer Responsibility Schemes ................................................................15
4.4.4 HSE Social Responsible Policies and Procedures .......................................16
5. Healthcare Waste ......................................................................................................17
5.1 Segregation and Packaging ................................................................................20
5.2 Storage ................................................................................................................21
5.2.1 Hospitals .......................................................................................................21
5.2.2 Health Centres/Clinics ..................................................................................22
5.2.3 Storage Units for Healthcare Risk Waste......................................................23
5.2.4 Waste Containment.......................................................................................25
5.3 Health & Safety Considerations ...........................................................................25
5.3.1 Handling .......................................................................................................25
5.3.2 Spillages .......................................................................................................26
5.3.3 Sharps .........................................................................................................26
5.4 Waste Tracking and Record Keeping...................................................................26
6. Contractors, Transport and Final Disposal .................................................................27
6.1 Collection Permits ................................................................................................29
6.2 Consignment Note – C1 Form .............................................................................30
6.3 Transfrontier Shipment (TFS) Form .....................................................................30
6.4 Dangerous Goods Regulations (ADR) .................................................................31
6.5 Trade Effluent .......................................................................................................32
7. Waste Audits .............................................................................................................33
Table of Contents
4
Traditional perception of landfill
Figure 1: Healthcare Waste Catergorized .......................................................................7
Figure 2:Waste Management Hierarchy ........................................................................9
Figure 3: Life Cycle Analysis .........................................................................................15
Figure 4: Clonakilty/Monaghan CTC Audit (PCCC) ......................................................19
Figure 5:Waterford EPA Audit (Acute)..........................................................................19
Figure 6: Origin of Food Waste in a Hospital ................................................................19
Figure 7: Healthcare Waste Segregation ......................................................................20
Figure 8:Waste Audit Procedure ..................................................................................33
Figure 9: The Results of a Typical Healthcare Risk Waste Audit ..................................36
Figure 10:Waste Segregated during the Healthcare Risk Waste Audit ........................36
Figure 11:Waste Segregated into Non-Risk Waste and Risk Waste Fractions ............36
List of Figures
5
Appendix A Poster Segregation and Packaging for Healthcare Risk and Non-RiskWaste
Segregation of Healthcare Waste Figure 6.1 from The Segregation,Packaging and Storage Guidelines for Healthcare Risk Waste
Standard Precautions Poster
Appendix B Example of Consignment Note (C1 Form) and European WasteCatalogue List (EWC)
Appendices
Poor waste management
6
1 Comptroller and Auditor General Report on Value for Money Examination, Report No. 49, Value for Money inHospitals, 2005.www.audgen.gov.ie
Many different waste streams are
generated in the delivery of the health
services. The responsible management and
disposal of such wastes is an onerous task
for healthcare personnel, involving environ-
mental, health and safety considerations.
This handbook has been prepared by the
Estates Directorate of the HSE acting in an
advisory capacity, to help develop
awareness of good practice in waste
management for all staff working in the
healthcare sector. A general overview of
waste management principles is provided
and details of further references are
included for those who require more specific
information.
The Handbook, together with appropriate
training, aim to inform staff, reduce the
health and safety risk associated with
healthcare waste and assist in achieving
compliance with Government policies,
statutory requirements and other relevant
health sector guidelines. In doing so, they
should also help to reduce the impact on the
environment as well as result in savings
from the efficient management of the waste
generated.
The Comptroller & Auditor General (C&AG)
carried out a Value for Money examination
of waste management in hospitals in 2004.
The C&AG’s report, published in 2005,
found that while healthcare risk waste was
well managed there was considerable
scope for improvements in the management
of other waste steams and the level of
recycling was low. The C&AG report1
sought to identify current practices in waste
management, the level and type of waste
produced and the associated disposal
costs. The report highlighted a number of
areas for improvement – notably the
identification of costs and quantities for the
disposal of some wastes and the lack of
targets and performance measurement in
hospital waste management plans. In
response, the HSE has acknowledged the
findings and has made waste management,
as it relates to environmental protection and
value for money, a key priority.
Introduction
7
The Guidelines use as their basis:
• DOHC/HSE Segregation Packaging and Storage Guidelines for Healthcare RiskWaste – 2010 November 2010
• Comptroller & Auditor General (C&AG) Value for Money Report on WasteManagement in Hospitals – 2005
• Healthcare Services Executive (HSE) Waste Management Policy - EstatesDirectorate Statement of Principles December 2010
The guidance given in this document in relation to Healthcare Waste is of a general nature.Those requiring more specific advice in this area are referred to the DOHC 2004Guidelines updated 2010 by HSE.
Healthcare Waste is defined as solid or liquid waste arising from healthcare or healthrelated facilities. This waste comprises two fractions, namely risk waste and non-risk wasteas illustrated below.
Figure 1: HealthcareWaste Catergorized
Scope
This is categorised as waste whichis potentially harmful to those whocome into contact with it, due to itsinfectious, biological,chemical,radioactive, sharp content; It isclassified as hazardous.
This category of waste, includeswastes which are not classified ashazardous.
*Note: The term non-risk is use todistinguish this waste from hazardouswaste. it should not be taken as implyingthat the waste is without risk if carelesslyhandled
(Hazardous) (Non-Clinical Healthcare Waste)*
8
HSEWASTE MANAGEMENT POLICY2
Mission Statement:
“The Health Services Executive is commit-ted to maintaining a waste managementsystem that is safe, efficient, cost effectiveand respectful of the environment”
AIMS:
� To protect public health & safety.
� To provide a safe working environmentfor staff.
� To minimise the environmental impactof waste generation, transport, treat-ment and disposal.
� Reduce waste handling and disposalvolumes and costs without compromis-ing health care standards.
OBJECTIVES:
� Foster commitment from all staff andmanagement to actively participate in
1. Waste avoidance
2. Waste reduction
3. Waste reuse
4. Waste recycling programs
� To comply with Environmental, Safetyand Welfare legislation and Policies.
� To adopt and implement the WasteManagement Policy throughout theHSE.
� To monitor performance and reviewWaste Management practices at leastannually.
� Develop practical guidelines for:
1. Waste minimisation
2. Use of returnable packaging
3. Re-usable products
4. Recycling equipment withinpurchasing guidelines
� Introduce a continuing waste manage-ment education program for all staff toincrease awareness of OccupationalHealth and Safety issues and wasteminimisation principles.
� Adopt policies and procedures tominimise the environmental impact ofwaste treatment and disposal.
1. Health Service Executive (HSE) Waste Policy
2 Healthcare Services Executive (HSE) Waste Management Policy - Estates Directorate Statement of PrinciplesDecember 2010.
9
All national policies and strategies aim to implement the waste management hierarchy(Figure 2). This prioritizes waste options in terms of environmental impact. These policiesprioritise waste management options in terms of environmental impact. The first step ingood waste management practise is to prevent or minimise the waste we produce. If wasteproduction cannot be prevented then reuse and recycling are the next preferable options.Generating energy from waste is the next option, while the least favoured option isdisposal.
Figure 2:Waste Management Hierarchy
The three principal policy documents that provide the framework on which to base wastemanagement practices are as follows:
� Waste Management - Changing Our Ways, Department of Environment & LocalGovernment 1998,
� Preventing and Recycling Waste - Delivering Change,Department of Environment &Local Government 2002, and
� Waste Management, Taking Stock and Moving Forward, Department of Environment& Local Government 2004.
A list of the relevant legislation pertaining to waste in the healthcare sector is set out below.It is important that HSE waste management practices are compliant with all relevantlegislation.
2. National Legislation
10
LEGISLATIONWaste Management Act, 1996 (S.I. No.10) and amendments (S.I. No. 146 of1998) and (S.I. No. 166 of 1998)
Waste Management (Amendment) Act,2001 (S.I. No. 36)
Protection of the Environment (PoE)Act, 2003 (S.I. No. 27)
Waste Management (Licensing)Regulations, 1997, 2001, 2004
(S.I. No. 133) (S.I. No. 397) (S.I. No.395) (Refer also to Section 7)
Waste Management (Facility Permit andRegistration) Regulations 2007 & thewaste management (Facility Permit andRegistration)(Amendment) Regulations 2008
(S.I. 821 0f 2007) entered into force on1 June 2008
Waste Management (Collection Permit)Regulations, 2007
(S.I. No. 820) (Refer also to Section 7)
Waste Management (Packaging) Regu-lations, 2007 (S.I. No. 798)
Waste Management (Movement of Haz-ardous Waste) Regulations, 1998 (S.I.No. 147)
(Refer also to Section 7)
MAIN ASPECTS• Obligation to prevent and minimise waste• Introduction of Producer Responsibility• Application of higher standards in accordance with
EU and national waste management requirements• Waste Management Plans made a Local Authority
executive function• Responsibility of waste management planning placed
on local authorities• Allows for environmental levies• Definition of hazardous waste*
• New powers for the EPA to gather and use evidencefor prosecutions
• Presumption that landowners are complicit in illegaldumping activity
• Licensing by the EPA for waste facilities• Application for a waste license to be made to the EPA
• Recovery of wastes requires a facility permit orregistration certificate
• Application for facility permits or registrationcertificates to be made to the local authority
• Non compliance of these regulations is an offense
• Collection of waste on a commercial basis must bepermitted
• Application for a collection permit to be made to thelocal authority
• Non compliance of these regulations is an offense
• These regulations impose obligations on producerswho supply packaging to the Irish market to promotethe recovery and recycling of packaging waste
• Movement of hazardous waste within Ireland• Non compliance of these regulations is an offense
under Section 36(3) of the Waste Management Act,1996
2.1 Waste Management Statutory Requirements
*Refer to EPA Publications EuropeanWaste Catalogue and HazardousWaste List, 2002 and the HazardousWasteClassificationTool and Final Report, 2003 for more information on hazardous waste (see also Appendix B EWC List).www.environ.ie/en/Publications/Environment/Waste/WEEE/FileDownLoad,1343,en.pdf
11
LEGISLATIONWaste Management (Shipments ofWaste) Regulations, 2007 (S.I. No. 419)
(Refer also to Section 7)
The Carriage of Dangerous Goods byRoad Regulations, 2007 (S.I. No. 288)
(Refer to Part 9; on safety advisors)
European Communities (Carriage ofDangerous Goods by Road) (ADRMiscellaneous Provisions) Regulations2007 (S.I. No. 289 of 2007)
Waste Management (Electrical andElectronic Equipment) Regulations,2005 (S.I. No 290)
Waste Management (Electrical andElectronic Equipment) Regulations,2005 (S.I. No 402)
Waste Management (Restriction ofCertain Hazardous Substance inElectrical and Electronic Equipment)Regulations, 2005 (S.I. No. 341)
The Waste Management (End of LifeVehicles) Regulations, 2006 (S.I. No.282)
www.irishstatues.book.ie – refer to this website for updateWater Pollution Act 1977 & 1990: Waste Discharge Licensing, Waste Management (Batteries& Accumulators) Regulations (SI 508/2008), FoodWaste Regulations 2009 (SI 508 /2009).
MAIN ASPECTS• Controls placed on movement of waste within, into
and out of the European community• Non compliance of these regulations is an offense
under Section 39(3) of the Waste Management Act,1996
• Outlines ADR requirements to be adhered to whentransporting Dangerous Goods by road which applythe provisions of the ADR 2009 EuropeanAgreement Concerning the International Carriage ofDangerous Goods by Road
• Requires that a Dangerous Goods Safety Adviser(DGSA) be appointed to oversee all the necessaryrequirements when transporting Dangerous Goods
• The Regulations contain provisions on an ECharmonised approach to the road checks aspect oftheir enforcement. They also implement certainexemptions which are in addition to those containedin the Annexes A and B to the “European AgreementConcerning the International Carriage of DangerousGoods by Road” (ADR) 2007
• Amended the Waste Management Act, 1996 byinserting Part VB Waste Electrical and ElectronicEquipment after section 53F and the WasteManagement Act is now referred to as “WasteManagement Acts 1996-2005”
• Impose obligations on suppliers and producers topromote the recovery of WEEE
• Prohibits the use of certain heavy metals in theproduction of electrical and electronic equipment
• Non compliance of these regulations is an offenseunder Section 53 of the Waste Management Act,1996
• Target of 85% reuse/recovery by Jan 2006 (byaverage weight per vehicle) and 95% reuse/recoveryby Jan 2015
• Ensure all end-of-life vehicles are dismantled, treatedand recovered in a manner that does not causeenvironmental pollution
• Minimise the use of specified hazardous substancesin vehicles
12
It is the responsibility of the manager ineach location to comply with relevant wastemanagement legislation. Each healthcarefacility as a generator or holder of waste isresponsible for ensuring that the waste isproperly stored, transported and disposedof in compliance with statuory requirements.
The holder of waste can be defined as theowner, person in charge, or any otherperson having possession or control of thewaste. For example a GP’s surgery,dentist’s surgery, nursing home or hospitalmanager are all holders of waste.
The holder of waste must ensure thatanyone that the waste is passed onto suchas a waste contractor is authorised to take
it. If the waste is illegally disposed of thoseresponsible will be legally accountable forthis. This obligation has no time limit andextends until the waste has either beenfinally and properly disposed of orrecovered.
The holder of waste should ensure that at aminimum:
� All waste is stored and disposed ofproperly to ensure that it will not causeenvironmental pollution or cause ahealth and safety risk,
� Waste is only handled by individuals orcompanies that are authorised to dealwith it, and
� A record is kept of all wastes.
HSE Producer Responsibilities:
� Ensure that waste contractors hold a valid waste collection permit.
i. Obtain a copy of their waste collection permit.
ii. Check that each waste contractor is permitted to carry the waste concernedfrom your Local Authority (EWC – European Waste Catalogue codes forhealthcare risk waste and non risk waste should be stated on the wastecollection permit).
iii. Check that the vehicle registration used to carry waste is listed on wastecollection permit.
� Ensure that all appropriate documentation – C1 form is completed before thehazardous or risk waste leaves site.
� Ensure your waste is being taken to an EPA licensed facility for processing i.e.processing/treatment facility or landfill.
If the holder of waste does not comply as outlined above they can be prosecuted underSection 32 (6) of the Waste Management Acts 1996-2005.
Line-managers at all HSE facilities are responsible for managing their waste in compliancewith the Regulations.
3. Responsibility of Holder of Waste
13
4.1 National Policies andTargets
The Department of Environment & LocalGovernment’s ‘Changing Our Ways’ policystatement was issued in September 1998.It set out national policy and key targetswhich the local authorities would implementand enforce to enable the regional wastemanagement plans to deliver on nationaltargets.The key targets of ‘Changing Our Ways’ for2013 were:
� Diversion of up to 50% of householdwaste away from landfill,
� Diversion of a minimum of 65% ofbiodegradable waste from landfill,
� Development of waste recovery facilitiesfor biodegradable waste up to 300,000tonnes per annum,
� Recycling of 35% of municipal wasteper annum,
� Reduction in number of municipal wastelandfills to 20 state of the art facilities,
� Reduce landfill methane emissions by80%, and
� Recycling of at least 85% of C&D waste.
Delivering Change - Preventing andRecycling Waste was published in March2002. It reflects the basics ‘Changing ourWays’ and advances to practicalapplications in achieving the policy. Movingaway from landfilling is a major aspect ofthis policy provided through prevention andminimisation of waste. New nationalinitiatives were accepted to speed up theprocess of change in social behaviour withinthe country.These included:
� A plan to set up a National WastePrevention Programme, and
� A proposal to establish RecyclingConsultative Forum and a MarketDevelopment Group.
Waste Management, Taking Stock andMoving Forward is the latest publishedpolicy issued in April 2004. This policy wasa progression report on waste managementin Ireland. It reaffirmed the importance ofthe waste hierarchy to attain a sustainablewaste management program.
There are twenty-one key points in thisdocument some of which include:
� Launching of the National WastePrevention Programme with immediateeffect,
� Launching of a Market DevelopmentGroup with immediate effect to developa programme for recyclable materials,
� Allocation of funding for a range of localauthority recycling projects,
� Advancements in development ofthermal treatment and the lessening oflandfilling works, and
� Developments in the ProducerResponsibility Initiatives in relation toWEEE and telephone directories as wellas the tyre and newsprint sectors.
The National Waste Prevention Programmewas launched in April 2004 which is beingled by the EPA. The aim of the Programmeis to deliver waste prevention and min-imisation through a range of initiativesaddressing awareness-raising, technicaland financial assistance, training andincentive mechanisms (www.nwpp.ie).
4. Approach to Waste Management
14
4.2Waste Prevention/Minimisation/Reuse
Avoiding waste generation is the best optionfor dealing with waste. The amount of riskwaste can be reduced by propersegregation of risk waste and non-riskwaste. Waste audits indicate that non-riskwaste placed in the risk waste streamincrease the volumes of risk waste, which isfive times more expensive to treat.
There are many means of preventing non-risk waste some examples which are listedbelow:
Prevention
� Packaging - Ensure all purchasingcontracts have a measure put in placeto reduce and prevent packaging. Try toreduce packaging by asking suppliers tocut down on product packaging and geta guarantee that suppliers will take backbulky packaging items such as pallets,cardboards and plastic outer wrapping.
� Refills - Use refillable dispensers wherepossible e.g. soap, paper towels etc.Use refill toner cartridges for printers,copiers and fax machines.
� Cleaning products - Purchase non-toxic cleaning products to avoidhazardous waste disposal.
� Food - Waste audits indicate that 75%of food waste is food ordered forhospital patients, but not consumed. Toprevent food wastage provide differentportion sizes and remove unpopularmenu choices.
Try and source products locally and checkthat they are from a renewable resourceand/or a recycled material. If waste cannotbe prevented then effort must be made tominimise it or segregated so that it issuitable for recycling.
Minimisation
� Cardboard - Change to reusablepackaging for daily deliveries.
� Paper - Print on both sides of the paper.Place posters near printers withinstructions for double sided printing.Use e-mail memos instead of leavingnotes. Store data on disc rather thanpaper copies.
� Equipment - Try to purchase durableequipment to increase life of product.Buy products that are guaranteed by awarranty.
� Batteries - Use rechargeable batterieswhere possible.
After prevention and minimisation reuse isthe next best option when dealing withwaste.
Reuse/Recycling*
� Cooking oil - Install equipment inkitchens to filter waste oil so it can bereused.
� Paper - Reuse scrap paper for internalnotes. Shredded paper can be reusedfor packages.
� Stationery - Reuse interoffice en-velopes, file folders and boxes.
� Cardboard - Reuse boxes for outgoingdeliverers.
� Furniture - Repair and donate oldfurniture and equipment to charity.www.wastechange.ie
� Crockery - Reuse ceramic instead ofpolystyrene or plastic.
� Glass - Glass should be chosen overplastic as it is easier to recycle.
*The above list is not exhaustive; many other materials such as timber, metals, food waste textiles, construction anddemolition waste can be reused or recycled.
15
4.3 Good Practice Notes from C&AGValue For Money Report, 2005(Waste Management in Hospitals)
The Comptroller & Auditor General’s(C&AG) Value For Money Report, 2005,outlined areas for improvement in wastemanagement practices in hospitals in ninegood practice notes:
1. Cutting down on the amount of wasteproduced,
2. Recycling suitable material,
3. Saving on the cost of risk wastecontainers,
4. Saving on the cost of treating anddisposing of risk waste,
5. Making waste storage areas secure,
6. Ensuring staff are aware of the latest ingood practice,
7. Performance based waste managementplans,
8. Key performance measures for wastemanagement, and
9. Learning from waste-related incidents.
4.4 Green Procurement
4.4.1 Green ProcurementGreen Procurement can be defined as theprocedure where environmental con-siderations are included in the procurementprocess. Public procurement accounts for16% of EU Gross Domestic Product. TheHSE accounts for 52% of Government'sprocurement allocation. Greening procure-ment would therefore have benefits for theenvironment.
4.4.2Waste Producer ResponsibilitySchemes
The producer responsibility concept focuseson the need for producers to takeresponsibility for the environmental impactof putting goods on the market.
Existing compliance schemes in Ireland,dealing with Packaging Waste, End of LifeVehicles (ELV’s) and Waste Electrical &Electronic Waste (WEEE), batteries andaccumulators are supported by Regulationsmade under the Waste Management Acts,1996-2005.
Figure 3: Life Cycle Analysis
16
4.4.3 Procurement Policy
Waste generation and the impact on theenvironment, particularly when viewed overthe lifetime of a product, can be greatlyinfluenced at the procurement stage. TheHSE policy on procurement includes astatement on the protection of theenvironment and sustainability
HSE Procurement Policy on Environment
As a significant public sector purchaser theHSE recognises that it has a particular roleto play in contributing to the protection of theenvironment and the promoting ofsustainable development, while pursuingbest value for money for its contracts. TheHSE will, therefore, endeavour to:
Waste Electronic Electrical Equipment (WEEE) White Goods
Comply with all relevant environmental legislation.
Encourage and persuade suppliers to investigate and introduce environmentally-friendlyprocesses and products.
Specify, whenever possible and reasonably practicable, the use of environmentally-friendly processes and products.
Ensure that, where appropriate, environmental criteria are used in the award ofcontracts.
Ensure that consideration is given to inclusion, within all specifications, of a facility forpotential suppliers to submit prices for environmentally-friendly alternatives.
Ensure that appropriate consideration is given to the costs and benefits ofenvironmentally-friendly alternatives.
17
Within the HSE, waste is produced by staff, patients and members of the public. The wastetypes generated in the healthcare sector are outlined below:
NON RISKWASTE
WASTETYPES
Healthcare Waste
Municipal Waste
Canteen/Food Waste*
Cooking Oil/Grease/Fats
Paper & Cardboard
Confidential Waste
Textiles
Glass
Metal
Plastic
Consumable items pertainingto the use of medical equip-ment
Potentially Offensive Material
DESCRIPTION
RISKWASTE
Healthcare Waste is defined as solidor liquid waste arising from health-care or health related facilities.
Consists of general household items
Food residue and peelings
Used oil
Packaging material, paper and non-confidential paper
Confidential paper files, documentsetc. shredded.
Clothes, Curtains, Bed linen etc.
Bottles
Drink cans/metal furniture etc.
Drink, food and medicine packaging
Plastic items, packaging, bottles,tubing, masks etc. (only plastics thatcarry the recycling logo can berecycled).
Incontinence wear, stoma bags,urinary drainage bags
DESTINATION(BEST PRACTICE)
Disinfection/EnergyRecovery or Disposal andThermal Treatment
Recycling/Residualfor Landfill Disposal
Composting
Recycling
Recycling
Shredding and Recycling
Recycling
Recycling
Recycling
Recycling
Recycling
Disposal to Landfill
5. Healthcare Waste
*See CRÈ/HSE food waste fact sheet at FOODWaste.ie.Also S.I. No. 508 of 2009. Waste Management Food Regulations 2009
18
**MBCA Guide to Construction & DemolitionWaste Legislation, May 2003.www.ncdwc.ie/html/documents/GuidetoConstructionandDemolitionWasteLegislation.pdf
WASTETYPES
Construction & Demolition(C&D) Waste
Green Waste
Bulky Waste
Wastewater
WEEE
Batteries, Fluorescent Tubes,Ink Jet Cartridges
Obsolete paints, engine oil,cleaning agents, weed killer,chemicals
DESCRIPTION
NON RISKWASTE
Wastes arising from construction,renovation and demolition activitiessuch as soil, rubble, bricks, metalsetc.**
Waste that arises from landscapingor gardening work
Beds, mattresses and obsoletefurniture
HAZARDOUS WASTE
Waste Electrical and ElectronicEquipment including hazardouscomponent i.e. transformers andcapacitors containing PCBs
Disposal to waters/sewer. Any discharge to sewer other thandomestic sewage must be licenced by a Local Authority (Section3 provides details on Discharge License Application Process)
DESTINATION(BEST PRACTICE)
Recycling/Residualfor Landfill Disposal
Composting
Reuse/Recycling/Residualfor Landfill Disposal
Removal of hazardouscomponent and recycling
Removal of hazardouscomponent and recycling
Removal of hazardouscomponent and recycling
Segregated and baled paper and cardboard for recycling
Food waste by area
Origin of Food Waste in a Hospital
5%5%
15%
75%
Daycare
Wards
Kitchen
Canteen
19
Waste Audit Results
* - textiles refer to non-recyclable incontinence wear
0.0%5.0%
10.0%15.0%20.0%25.0%30.0%35.0%40.0%
Cork ‘08
Monaghan ‘07
45.0%
Text
iles
Org
anic
Pap
er
Car
dboa
rd
Pla
stic
Oth
erC
ompo
site
s
Met
al
Woo
d
Gla
ss
*Hospital Equipment, Construction & Demolition waste, Timber Pallets & Textiles were excluded from this waste audit.
Protective Equipment (e.g. Gowns)
Food Waste
Paper Towels, etc
Healthcare Textiles
15%
Composition of Hospital Waste, 2001(Waterford Regional Hospital)
Other Non-Packaging
Cardboard
Newspapers and Magazines
Office Paper
Glass Packaging
Other Packaging
11% 7% 6%
16%8% 6%
7%
16%
8%
Figure 4: Clonakilty/Monaghan CTC Audit (PCCC)
Figure 5:Waterford EPA Audit (Acute)
Figure 6: Origin of FoodWaste in a Hospital
The following figure show samples results of waste audits.
20
5.1 Segregation and Packaging
For a more detailed guidance on themanagement of healthcare risk wasterefer to the Segregation and PackingGuidelines. 3
The correct segregation of waste at thepoint of generation is crucial to themanagement of all wastes. Figure 7illustrates the basic segregation andpackaging requirements for risk waste.Appendix A provides more details.
� The first level of segregation involvesthe division of healthcare waste into riskand non-risk waste.
� Risk waste is classified as DangerousGoods under ADR requirements, there-
fore, the Medical Waste packaging mustbe UN Approved. Two different types ofpackaging are used for healthcare riskwaste, bags and rigid containers. Yellowplastic bags should not be used forsharp or breakable items or for liquids.
� There are no particular packaging andsegregation requirements for non-riskwaste but segregation where possible tomeet the requirements of recyclingschemes should be completed.
� Non-risk waste is usually packaged inblack or transparent bags. Howevertransparent bags provide for ease ofidentification of waste types and preventcross-contamination with risk waste.
3 Segregation, Packaging and Storage Guidelines for Healthcare RiskWaste, DOHC/HSE, 2010 by HSE.
Figure 7: HealthcareWaste - Basic segregation and packaging schematic
21
5.2 Storage
The following are typical examples of bestpractice for storage of healthcare waste.
5.2.1 Hospitals
In hospitals waste should be stored at acentral location with sub-collection stationsat designated locations within the hospital.
5.2.1.1 CentralWaste Store Specification(External and Internal)
� Sufficient capacity for the frequency ofcollection including additional storagespace for missed collections or accu-mulations during public holidays,
� Secure ventilated room for the storageof hazardous and other sensitive waste.This room should be equipped with afreezer cabinet for the storage of largeanatomical items,
� Separate covered storage area forclean healthcare risk waste bins prior todistribution,
� Appropriate warning signs indicating thepresence of healthcare risk waste/bio-hazard displayed at all entrances,
� If flammable wastes are stored, a nosmoking policy must be enforced,
� Secure from interference by unautho-rised persons, children or animals,
� Well ventilated, well lit, drained with animpervious hardstanding floor and havea covered storage area for full health-care risk waste wheelie bins,
� Easily accessible to collection vehicles,
� Equipped with spillage kits and washing/cleaning and disinfection facilities fordealing with spillages etc.
5.2.1.2Waste Sub-Collection Stations(Internal)
� Dedicated rooms which provide short-term storage requirements,
� Storage of both non-risk and risk wasteshould be kept separate,
� Waste brought to the collectionsstations in yellow bags and rigid boxesand other containers will normally betransferred into wheeled bins or trolleysin the collection station,
� Access should be limited to staff,
� The area should be well lit and havewashable walls and floors which areresistant to disinfectants anddetergents, and
� Appropriate safety and first aid equip-ment should be provided.
Acute hospital waste storage facility
22
5.2.2 Health Centres/ClinicsStorage Units for Healthcare RiskWaste:
WASTE STOREDimensions: 1500w x 1500d x 2200h mm (4.5 cubic metres)
LARGE CAPACITYWALK IN STOREDimensions: 2400w x 2400d x 2400h mm (11 cubic metres)
23
5.2.3 Storage Units for HealthcareRiskWaste
Features should include:
� Suitable for external or internal use,
� Secure and vandal proof,
� Large capacity bunds to capture andretain spillages,
� Emergency spill kit,
� Lockable internal safety cabinet tosegregate hazardous chemicals/waste(Amalgam etc.),
� Safety/warning signage, and
� Ventilation panels.
Examples of waste storage units. Suitable for general practice and small healthcentres/clinics.
WASTE CABINETModel Storage Capacity DimensionsGP.05 0.5 cubic metres 915w x 460d x 1220h mmGP1.5 1.57 cubic metres 1500w x 700d x 1500h mm
WASTE BUNKERModel Storage Capacity DimensionsGPB.05 0.5 cubic metres 1200w x 600d x 850h mmGPB1.0 1.0 cubic metres 2000w x 600d x 850h mm
24
HEALTH RISKWASTE WHEELED-BINStorage Capacity Dimensions770 Litres 785w x 1260d x 1370h mm
FOODWASTE/SMALL (DOMESTIC) NON-RISKWASTE WHEELED-BINStorage Capacity Dimensions240 Litres 580w x 725d x 1075h mm
DOMESTICWASTE WHEELED-BINStorage Capacity Dimensions1100 Litres 985w x 1380d x 1370h mm + 200mm for wheels
25
5.2.4 Waste Containment
CHEMICALWASTE CABINETDimensions: 1500W x 1500W X 2200H (4.4Cubic metres)
PHARMAWASTE UNIT(Secure cabinet used in conjunction with a 50 Litre Sharps/Pharma WasteContainer). Dimensions: 430w x 470d x 770h mm
5.3 Health & Safety Considerations5.3.1 HandlingThe general principles when handlinghealthcare waste are as follows:� Appropriate Personal Protective
Equipment (PPE) should be worn whenhandling waste and all employeeshandling infectious waste must bevaccinated (Refer to ImmunisationGuidelines for Ireland, NationalImmunisation Advisory Committee ofRoyal College of Physicians of Ireland,2002 edition), and
� Waste bags, boxes and containersshould be closed when two-thirds full orat the manufacturer's fill line andlabelled, tagged and securely sealed toprevent spillages,
� Containers holding liquid must havesufficient absorbent material or jellyingagent to prevent leakages from thecontainer.
� Porters/care assistants should notremove bags/containers unless they arelabelled/tagged appropriately,
� Manual handling of waste bags/containers should be minimised,
� Waste bags should be picked up by theneck only and should not be thrown ordropped to avoid puncture or otherdamage,
� To prevent the risk of injury waste bagsshould not touch the body duringhandling and containers should becarried by the handle,
� Wash hands thoroughly after handlingwaste with soap and hot water.
26
5.3.2 Spillages
All spillages from healthcare risk wastebags or containers should be treated aspotentially hazardous and dealt with asfollows:
� Do not leave spillages unattended. Amember of staff should remain in thearea while another gets assistance
� Adequate protective clothing should beworn when cleaning up spillages
� In the event of a spillage of healthcarerisk waste, the Department Managershould be informed and the area shouldbe disinfected immediately
� All staff involved in any aspect ofpackaging storage and transport ofhealthcare risk waste should receivestandard precaution training asappropriate to their task this shouldinclude:
� Hand hygiene,
� Proper use of Personal ProtectiveEquipment (PPE)
� Management of blood and bodyfluid spillage
5.3.3 Sharps2
Do not recap needles after use.
A needle stick injury should be dealt with asfollows:
� Clean the wound,
� Encourage bleeding immediately bysqueezing the site of the injury andwash with warm water and soap,
� Do not suck the wound,
� If there is a protruding foreign body/object, do not press on the object.
� Apply firm pressure on either side of thewould and build up padding on eitherside of the object,
� Secure with a bandage and seekmedical advice immediately, and
� Report the incident to your DepartmentManager immediately.
Appendix A contains a copy of thestandard precautions poster that includessome precautions that are relevant tohealthcare risk waste.
5.4Waste Tracking and Record Keeping
All healthcare risk waste containers shouldbe traceable to the point of generation (forexample in hospitals from the ward/sectionwhere the waste originated from). A taggingor bar coding system provides a trackingsystem for healthcare risk waste. Thefollowing information should be recorded toassist traceability:
� details of point of generation
� date of collection
� tags and tracers reference numbers
� waste type and quantities
� details of waste contractor and carriers
� destination of waste
� disposal/treatment methods
It is the waste generators responsibility toensure that the despatch documentation isin order and completed correctly. Annualaudits of the waste contractor should becarried out this should include the wastecarrier and facility of destination. Taggingrecords should be kept on file for threeyears and copies of completed C1 formskept on file for a minimum of five years (forhazardous waste only).
2 Guidelines for the Prevention and Management of Percutaneous Injuries and other Exposure Incidents inHealthcareWorkers of Health Board Managed Health Care Facilities within the Health Service Executive,ERHA, Infection Control Advisory Committee, 2001.
27
The transportation of healthcare waste isgoverned by several sets of regulationsdealing with different concerns relating tothe materials transported. All waste carriersrequire waste collection permits/licenses.C1 forms, TFS forms and DangerousGoods/ADR requirements apply tohazardous/healthcare risk waste.
Every step of the waste management chainis strictly regulated. Waste generatorsshould remember that they have aresponsibility to ensure that waste sent off-site is managed in a responsible manner.Working correctly with your waste serviceprovider can ensure this objective. Thefollowing list gives some ideas of bestpractice. It is up to each generator to keepabreast of the relevant environmentalhealth and safety legislation.
Do
Assessing/sorting your waste
� Do determine the source, nature andquantity of waste generated i.e. is itrecyclable or non-recyclable? Is it non-hazardous or hazardous waste? Aspecialist waste contractor is required todeal with hazardous waste.
� Do segregate your waste streamscorrectly on-site.
� Do not place hazardous waste withother non-hazardous waste.
� Do ensure that hazardous waste is notmixed with other categories ofhazardous waste or with non-hazardouswaste.
� Do not put liquid slops or cooking oil intocompactors. This can lead to a dis-charge, during uplift or transport,causing slippage hazards.
� Do provide the service provider with asafe means of access and egress fromyour on-site waste storage area atagreed times.
� Do train staff to store and handle wastestreams correctly on-site.
Getting the Documentation right
� Do develop a written waste procedure.
� Do provide information to the wasteservice provider on safe working pro-cedures on-site and any temporaryhazards associated with the collectionand handling of the waste.
� Do obtain documentary proof of wastetransfer, receipt and final recovery ordisposal by the waste serviceprovider(s) involved.
� Do realise that movement of hazardouswaste within the state must beaccompanied by a consignment note(C1 form) in accordance with the WasteManagement (Movement of hazardousWaste) Regulations.
� Do be aware that waste transferred outof the state must comply with therequirements of the TransfrontierShipment (TFS) Regulations.
� Do keep detailed records of allhazardous waste shipments for aminimum of five years. These recordsshould include TFS and C1documentation.
6. Contractors, Transport and Final Disposal
28
Choosing/working with your serviceprovider
� Do examine the credentials ofprospective waste service provider(s)and their facilities/services.
� Do verify this information and the wasteservice provider’s compliance historywith the Environmental ProtectionAgency (EPA) or local authority.
� Do ensure that the waste haulagecontractor (who collects the waste)holds a valid waste collection permit inaccordance with the WasteManagement (Collection Permit)Regulations.
� Do ensure the service provider’s facilityhas sufficient capacity to accept anddeal with your waste stream in thecorrect manner.
� Do ensure that the facility’s licenseauthorities it to accept the particular typeof waste involved.
� Do ensure your waste is collected anddelivered to an appropriately licensed/
permitted facility. Under waste manage-ment law all waste managementfacilities must be either licensed by theEPA or permitted by the relevant localwaste authority.
� Do liaise with your service provider ondesigning a waste storage area on-site.Talk to your service provider aboutmaximising the use of your wastemanagement equipment on-site e.g.compactor skip, bins and balers.
� Do notify the service provider if there isany changes in the waste’scomposition.
Don’t
� Do not transfer waste to hauliers who donot have a valid waste collection permit.
� Do not move hazardous waste withinthe state without a consignment note(C1 form).
� Do not use unlicensed facilities forwaste disposal/recovery. It is illegal.
Unsegregated mixed waste
29
This is issued by the EPA and defines the nature ofenvironmentally acceptable waste management activities at awaste facility. Details of facilities with a waste license can beobtained from the EPA (www.epa.ie).
This is issued by the local authority and authorises waste collectionactivities. Holders of a waste collection permit can only collectwithin the jurisdiction of the issuing local authority and they arereviewed every 2 years. Hauling waste or passing waste on to anunauthorised collector is an offense.
The local authority issues this permit. It legitimates the operationof the waste infrastructure that is not big enough or does not posea large enough impact on to the environment, to warrant a wastelicense. It is usually issued for the temporary storage of non-hazardous waste for more than 6 months. It is up to you to ensurethat your contractor has a permit for the area in which waste isbeing collected and whether the proposed waste movement is inaccordance with any conditions contained in the permit.
Issued by the local authority for the temporary storage ofhazardous waste (less than 6 months).
Waste License
Waste CollectionPermit
Waste Permit
RegistrationCert
Checklist ofWaste Contractor’s licenses and permits
This is used to track movements of hazardous waste from itssource to the waste management facility, to be used for disposalor reclamation. It needs to be completed by each party in the wastetransaction. Exceptions from using a C1 form are:� Authorised movements of hazardous waste when such
materials are to be exported from Ireland to other countries.� Hazardous waste collected from bring centres or by
segregated collection services provided to members of thepublic.
� Transfer of waste oils.� Movement of End of Life Vehicles (ELVs).
This is required when exporting waste from Ireland for disposal,as well as for hazardous wastes passing to recovery. It is made upof 2 parts:� Notification form, which must be completed before waste is
moved. This sets out the advance consent of the affected EUmember states.
� Movement/Tracking form, which accompanies the shipmentwhen it is moved. It provides information on the actualmovement of each load.
C1 Form
TransfrontierShipment from(TFS)
6.1 Collection Permits
Under the Waste Management (CollectionPermit) Regulations, 2007 (S.I. No. 820)waste carriers must apply for a wastecollection permit. These permits are issued
by the local authority. It is the responsibilityof the waste holder to ensure that the wastecarrier possess a valid waste collectionpermit number, for the waste type inquestion.
30
6.2 Consignment Note - C1 Form
When transporting hazardous waste(including healthcare risk waste) off-sitewithin Ireland a consignment note must becompleted by the consignor andaccompany the waste during carriage inaccordance with Waste Management(Movement of Hazardous Waste)Regulations, 1998 (S.I. No. 147).
The consignment note is available from thelocal waste authority (LA) in whosefunctional area the waste originates. Eachform is uniquely numbered and is made upof five differently coloured identical pages,with each page being sub-divided into threeparts (A, B & C). A carboning system allowsentries made on the uppermost page to bereproduced on the other pages.
Note: NEW WASTE TRANSFER FORM SYSTEM 2011It is expected that new legislation will be introduced in2011 making Dublin City Council, National TFS Office,sole authority for the administration of Waste TransferForms (WTF). These will replace the current C1 Formsystem. The fundamental change to the current C1system is the move to an online system which willdiscontinue the requirement to retain paper records ofwaste movements. It is expected that this should reducethe administrative burden for those shipping the sametype of waste regularly e.g. healthcare risk waste. It isalso expected that pick-ups from multiple locations willbe permitted on a single WTF Form. That being the case,it may become necessary to use separate consignmentnotes containing the required ADR information for eachsite visited in addition in order to satisfy the Carriage ofDangerous Goods Regulations.
Copy To be completed by:White Copy CarrierGreen Copy LA of Consignor (Origin)Blue Copy LA of Consignee
(Destination)Yellow Copy ConsigneePink Copy Consignor
C1 Form To be completed by:Part A Consignor (Producer or
Holder, HSE)Part B Carrier (Transporter)Part C Consignee (EPA Licensed
Waste Facility or WasteContractor)
The consignor (HSE) completes and signsPart A and keeps the bottom pink copy andpasses the rest of the C1 form to the carrier.The carrier, in turn completes Part B andkeeps the white copy before finally passingthe consignment note to the consignee whomust return the completed form to the twolocal authorities (LA of origin anddestination) after completing Part C andkeep the yellow copy. A separateconsignment note must be raised for eachshipment of hazardous waste. Appendix Bcontains an example of a completed C1Form. The EWC Codes required for C1forms are listed in the European WasteCatalogue and Hazardous Waste List,2002. Where the waste is being shippedabroad, further documentation is necessary(TFS Form).
6.3 Transfrontier Shipment (TFS) Form
The legal requirements on moving wastefrom Ireland to other countries are set out inthe Waste Management (Shipments ofWaste) Regulations, 2007 (S.I. No. 419)and in the Regulation (EC) No. 1013/2006of the European Parliament and of theCouncil of 14 June 2006 on shipments ofwaste.
The TFS Form consists of a two partdocument:
� Notification Document
� Movement/Tracking Document
The TFS Form can be used for singleshipment or for a “general notification” for aspecified number of shipments and eachhas a unique number for tracking purposes.Dublin City Council is designated as theNational TFS Office. When the waste hasbeen processed the Form is completed andis sent to the National TFS Office with theCertification of Disposal/Recovery/Destruction.
Refer to Transfrontier Shipment of WasteGuidelines for Exporting Waste from andImporting Waste in the Republic of Ireland,National TFS Office Waste ManagementSection, Dublin City Council.
31
6.4 Dangerous Goods Regulations (ADR)Under agreed international rules for thetransportation of all types of DangerousGoods for the different modes of transport.There are specific requirements for theclassification, packaging, labelling anddocumentation of dangerous goods as wellas the training of personnel involved in thetransport of such dangerous goods. Furtherinformation is provided on www.hsa.ie.The two classes of dangerous substanceswhich are specifically relevant to wastehealthcare are Class 6.1-toxic substancesand Class 6.2-infectious substances.Legislation requires that safety adviser (SA)be appointed to oversee all the necessaryrequirements when transporting DangerousGoods. The duties of a SA are outlined asfollows:Healthcare institutions generating haz-ardous waste must be able to call on anappropriate qualified Safety Adviser toadvise on the packaging and transport ofsaid waste.Functions of Safety AdvisersThe functions of a safety adviser shallinclude in particular the following:� (a) monitoring compliance with the rules
governing the transport of dangerousgoods;
� (b) advising the undertaking on thetransport of dangerous goods;
� (c) ensuring that an annual report to theundertaking is prepared on the activitiesof the undertaking concerning thetransport of dangerous goods;
� (d) monitoring the following practicesand procedures relating to the activitiesof the undertaking which concerns thetransport of dangerous goods –(i) the procedures for compliance with
the rules governing the ident-ification of dangerous goods beingtransported,
(ii) the practice of the undertaking intaking into account, whenpurchasing means of transport,any special requirements inconnection with the dangerousgoods to be transported,
(iii) the procedures for checking theequipment used in connection withthe transport of dangerous goods,
(iv) the proper training of theundertaking’s employees and themaintenance of records of suchtraining,
(v) the implementation of properemergency procedures in theevent of any accident or incidentthat may affect safety during thetransport of dangerous goods,
(vi) the investigation of and, whereappropriate, preparation of reportson serious accidents, incidents orserious infringements recordedduring the transport of dangerousgoods,
(vii) the implementation of appropriatemeasures to avoid the recurrenceof accidents, incidents or seriousinfringements,
(viii) the account taken of the legalprescriptions and specialrequirements associated with thetransport of dangerous goods inthe choice and use of sub-contractors or third parties,
(ix) verification that employeesinvolved in the transport ofdangerous goods have detailedoperational procedures andinstructions,
(x) the introduction of measures toincrease awareness of the risksinherent in the transport ofdangerous goods,
(xi) the implementation of verificationprocedures to ensure thepresence, on board the means oftransport, of the documents andsafety equipment which mustaccompany transport and thecompliance of such documentsand equipment with health andsafety regulations, and
(xii) the implementation of verificationprocedures to ensure compliancewith legislation governing loading andunloading of dangerous goods.
32
*“Trade Effluent” means effluent from any works, apparatus, plant or drainage pipe used for the disposal to waters orto a sewer of any liquid (whether treated or untreated), either with or without particles of matter in suspension therein,which is discharged from premises used for carrying on any trade or industry (including mining), but does not includedomestic sewage or storm water.
Discharge License Application Process
6.5 Trade Effluent
It is an offense under Irish legislation tocause or permit any pollutant matter to enterwaters. There is a waste water licensingsystem that allows certain discharges intowater or sewer as long as it meets therequirement of the discharge license. Thedischarges must be monitored andrecorded, the licence will require the licenceholder to take and test discharge samplesat least four times per annum.
Records must be maintained and submittedto the Local Authority. The Local Authoritymust also be informed, without delay of anymodification or extensions as these mayrequire a review of the license.
The public have a legal right to examinedocumentation and make representationsregarding an application for a proposedlicense (see Discharge License ApplicationProcess below).
A discharge license is granted subject to thefulfilment of certain conditions. They mayinclude the following:
Local Authorities place particularsignificance on accidental discharges andthere consequences; it is important that allpotential liquid waste is contained on-site.
The Local Authority will require policies andprocedures to be put in place to deal withemergency situations; accidental spillages,liquid isolation and mop-up.
Times the discharges What effect theare made. discharges will have?
Sampling Records and informationof discharge. supplied to the Local
Authority.
Discharge outlet Existence of metres,construction. manhole inspection
points.
Preventive measures. Emergency routines.
33
7. Waste Audits
The hospital/line manager should ensurethat a competent person is made responsi-ble for waste management and that auditsof waste activities are carried out regularly.
A waste audit is defined as an examinationof the waste in your organisation to quantitythe amount and type of waste produced andhow it is currently managed. The contentsof waste containers should be examinedonly by suitable trained persons, who areproperly equipped to carry out such aprocedure.
Figure 8 provides a step by step breakdownof the steps involved in carrying out a wasteaudit.
It is worthwhile to use a questionnaireduring the audit. A sample questionnaire isshown below.
Waste characterisation is defined “as theprocess by which the composition ofdifferent waste streams is analysed.”
A waste management plan can beformulated following the waste auditoutlining recommendations for improvementin waste management.
Figure 8:Waste Audit Procedure
34
Sample Waste Management Questionnaire
Interviewee’sQuestion Guidance
Comments
Responsibility
1. Has a person responsible forwaste management, within thehospital, been identified? Ifyes, Who?
Waste segregation
2. Are wastes segregated intoappropriate categories?Non-Risk Waste.Risk Waste.Hazardous.Recyclable Waste.
3. Are staff aware of segregationrequirements via training,written procedures or notices?
Storage containers
4. Are appropriate containersused for storing waste?UN approved yellow containersfor risk waste.
5. Are the containers sensiblylocated?
6. Are the containers suitablylabelled?
Waste handling
7. Are wastes handled in a safemanner? Use of personal pro-tective equipment?
8. Are containers lidded andtagged where appropriate? Arethey locked/lockable?
Waste storage area
9. How and where is the wastestored?
Allocate responsibility for the implementation,assessment and updating of the sites wastemanagement plan to a named individual.
Cost can be reduced and risks minimised ifwastes are segregated appropriately. Theindiscriminate mixing of hazardous and nonhazardous waste will result in the whole loadhaving to be disposed of by the more expensivehazardous waste disposal method.
Successful waste management depends uponstaff using the facilities properly.
The size of the container should be appropriatefor the volumes of waste produced and the fabricof the container should be compatible with thenature of the waste. Controls are necessary toensure correct use.
Place the containers in a suitable location toencourage users to segregate recyclables and toavoid accidental contamination from incorrect wastetypes and to minimise handling and transport.
Labelling ensures correct segregation and makesoperators aware of any associated hazards.
Containers for waste are likely to be placed closeto the point of production, where they will bemoved to an outside area for collection fortransport and disposal. Ensure that appropriatesafety measures are in place.
To prevent spillage and littering of site.Healthcare risk waste should be tagged andsecure before leaving the area of production.
Store waste in a secure designated area tominimisepotential harm to the environment, employees andwaste contractors. Ensure proper supervision andinspect regularly. Provide safe access and egressfor both the placing of waste into storage and for itsremoval by waste contractors.
35
Sample Waste Management Questionnaire
Interviewee’sQuestion Guidance
Comments
Waste storage area
10. How long are wastes storedprior to transport?
11. What safety and emergencyprocedures are in place?
12. Are records kept of wasteproduced and of their safeand correct disposal?
13. Are transfer notes completedfor all controlled wastes andhazardous wastes generatedon the site?
14. Are all waste carriers permit-ted or licensed?
Procedures
15. What procedures exist cover-ing general waste manage-ment operations?
Costs
16. How are recovery/disposalcosts allocated?
Recycling and waste minimisation
17. Are ways of reusing wastereviewed?
18. Are opportunities for recyclingpursued?
Records should be kept of wastes stored.Procedures should be in place to prevent thebuild up of particular types of waste which maybe difficult to dispose of or cause a potentialhazard, e.g. fire risk, spillage or leakage.
The external waste storage area should becovered with a hardstanding material resistant tocorrosion and suitably impervious. If hazard liquidwastes are stored, the area should be bunded. Ifflammable wastes are stored, a no smokingpolicy must be enforced.
Details of dates, quantities, disposal methods,disposal location, contractor and costs should berecorded and centrally accessible.
Transfer notes for hazardous waste should bekept on site for five years for inspection as part ofthe Duty of Care requirements. However, allhazardous waste consignment notes must bekept on site for a minimum of five years.
All waste carriers should be licensedunder theWasteManagement (Collection Permit) Regulations, 2001;S.I. No. 402 of 2001. Copies on file.
Detailed procedures are required to coversegregation, handling, containers, labelling,safety requirements and hazardous disposal orhandling methods required. Include records oftracking tags for risk waste.
Identify the disposal costs for each type of waste.Seeing disposal costs allocated to a particularhospital/department/section raises the incentiveof producers to reduce waste generation andmanage waste properly.
Consider reusing cardboard boxes, envelopes orusing shredded paper as protective packaging.
Continue to assess the cost effectiveness ofintroducing new recycling schemes.
36
Figure 9 is an example of results from oneacute hospital healthcare risk waste auditthat was carried out in 2006. From the totalamount of waste collected in the audit(177kg) healthcare risk waste made up 45%(79kg) and healthcare non-risk waste madeup 44% (78kg) of the waste with theremaining 11% (20kg) containing sharps
boxes. The result in this case shows thepotential for savings, given that the 44%non risk waste faction could be disposed ofto landfill at on fifth the cost of healthcarerisk waste. Regular training on risk wastesegregation is essential to reduce wastecosts.
Figure 9:The Results of a Sample Healthcare RiskWaste Audit
Figure 10: Photo of Non-Risk & Risk Waste Mixed before Segregation
Figure 11: Photo of Waste Segregated into Non-Risk Waste and Risk Waste Fractions
37
ORGANISATION CONTACT DETAILS
Department of Health and Children www.dohc.ie
Cré Composting Association of Ireland Teo www.cre.ie
Department of the Environment Heritage& Local Government (DEHLG) www.environ.ie Tel: 01 888 2000
ENFO - Information on the Environment www.enfo.ie Tel: 01 888 2001or 1890 200 191
Enterprise Ireland www.envirocentre.ie Tel: 01 808 2229
Environmental Protection Agency (EPA) www.epa.ie Tel: 1890 33 55 99
EPA National Waste PreventionProgramme www.epa.ie/whatwedo/resource/prevent/nwpp/
FÁS www.fas.ie Tel: 01 607 0969
Health and Safety Authority (HSA) www.hsa.ie Tel: 01 6147000
Health Service Executive (HSE) www.hse.ie
ICLEI - Local Governments for Sustainability www.iclei-europe.org/procurement
Institute of Wastes Management (Irish Centre) www.ciwm.co.uk Tel: 0044 1604 620426
Irish Statute Book www.irishstatutebook.ie
Life Cycle Assessment (LCA) http://waste.eionet.europa.eu www.oced.org
Race Against Waste www.raceagainstwaste.ie Tel: 1890 667639
Repak Ltd. www.repak.ie Tel: 01 4670190
National Construction and DemolitionWaste Council www.ncdwc.ie
Sources of information
38
ADR 2009 European Agreement Concerning the International Carriage of DangerousGoods by Road.
Comptroller and Auditor General Report on Value for Money Examination - WasteManagement in Hospitals, Department of Health and Children, March 2005
EuropeanWaste Catalogue and HazardousWaste List, EPA, 2002www.environ.ie/en/Publications/Environment/Waste/WEEE/FileDownLoad,1343,en.pdf
Guidelines for the Prevention and Management of Percutaneous Injuries and otherExposure Incidents in Healthcare Workers of Health Board Managed Health CareFacilities within the Health Service Executive, ERHA, Infection Control AdvisoryCommittee, 2001
Immunisation Guidelines for Ireland, National Immunisation Advisory Committee ofRoyal College of Physicians of Ireland, 2002 editionwww.ndsc.ie/hpsc/A-Z/vaccinePreventable/vaccination/Guidance/
MBCA Guide to Construction & DemolitionWaste Legislation, May 2003www.ncdwc.ie/html/documents/GuidetoConstructionandDemolitionWasteLegislation.pdf
National HazardousWaste Management Plan, EPA, 2008www.epa.ie/downloads/pubs/waste/haz/nhwmp2001/
National Strategy on BiodegradableWaste,Department of the Environment, Heritage and Local Government, 2006www.cre.ie/National_Strategy_BioWaste.html
Preventing and RecyclingWaste - Delivering Change,Department of the Environment, Heritage and Local Government, 2002www.epa.ie/downloads/pubs/waste/plans/name,11646,en.html
Procedure for Identifying Hazardous Components ofWaste, EPA, 2004www.epa.ie/downloads/pubs/waste/plans/name,11651,en.html
Race AgainstWaste Action atWork,Department of the Environment, Heritage and Local Government, 2005www.raceagainstwaste.com/take_action/large_org/
39
Report on the Second National Acute Hospitals Hygiene Audit, NHO, HSE, 2006www.hse.ie
Segregation, Packaging and Storage Guidelines for Healthcare RiskWaste,DOHC/HSE November 2010.www.dohc.ie/publications/segregation_packaging.html
Transfrontier Shipment ofWaste Guidelines for ExportingWaste from and ImportingWaste in the Republic of Ireland, National TFS Office, Dublin City Council, EblanaHouse, 68-71 Marrowbone Lane, Dublin 8, [email protected]
Waste from Electrical & Electronic Equipment, EPA, May 2001www.epa.ie/downloads/pubs/waste/weee/name,11649,en.html
Waste Management - Changing OurWays,Department of the Environment, Heritage and Local Government, 1998www.epa.ie/downloads/pubs/waste/plans/name,11643,en.html
Waste Management,Taking Stock and Moving Forward,Department of the Environment, Heritage and Local Government, 2004www.epa.ie/downloads/pubs/waste/plans/name,11660,en.html
Healthcare Services Executive (HSE)Waste Management PolicyEstates Directorate Statement of Principles December 2010.
40
Biodegradable Content: the percentagecontent of waste which is biodegradable.For municipal waste this usually fluctuatesaround 60%-70%.
Biodegradable Municipal Waste (BMW)or Organic Waste: municipal waste that iscapable of undergoing anaerobic or aerobicdecomposition, such as food and gardenwaste, paper and paperboard.
Bio-hazard: or biological hazard is anorganism, or substance derived from anorganism, that poses a threat to (primarily)human health.
Biological Treatment: involves composting,anaerobic digestion, mechanical/biologicaltreatment or any other process forstabilising and sanitising biodegradablewaste.
Bulky Waste: Large items of solid wastesuch as obsolete furniture, beds andmattresses.
Commercial/Industrial (C/I)Waste: wastefrom a premises used wholly or mainly forthe purposes of a trade or business(including non-processed industrial waste)or for the purposes of sport, recreation,education or entertainment but does notinclude household, agricultural or industrialwaste.
Compost: the stable, sanitised and humus-like material rich in organic matter and freefrom offensive odours resulting from thecomposting process of separately collectedbiowaste.
Composting: the autothermic andthermophilic biological decomposition ofseparately collected biowaste in thepresence of oxygen in order to producecompost.
Construction & Demolition (C&D)Waste:All waste that arises from construction,renovation and demolition activities and allwastes referred to in Chapter 17 of theEuropean Waste Catalogue (EWC) e.g.concrete, bricks, tiles, mortar, wood etc.
Cytotoxic and Cytostatic Medicines: anymedicinal product that has one or more ofthe following hazardous properties: Toxic(H6), Carcinogenic (H7), Mutagenic (H11)or Toxic for Reproduction (H10).
Dangerous Goods: A dangerous good isany solid, liquid or gas that can harmpeople, other living organisms, property, orthe environment (See ADR 2009).
Disinfection: is the destruction of patho-genic and other kinds of micro-organisms.
Disposal to Landfill: means a wastedisposal facility used for the deposit ofwaste onto or under land.
Domestic/Household Waste: the wasteproduced within the grounds of a building orself-contained part of a building used for thepurposes of living accommodation.
Energy Recovery: Process where energyis recovered from thermal treatment ofwaste.
GreenWaste: waste arising from gardens,public parks consisting of garden trimmings,leaves, shrubs, plants, grass, trees etc.
HazardousWaste:means “waste of a classlisted in the current Hazardous WasteCatalogue, which either:
� constitutes Category I type waste asspecified in Part I of the SecondSchedule to the Waste ManagementAct 1996 and has any of the propertiesspecified in Part III of the sameSchedule; or
� constitutes Category II type waste asspecified in Part I of the SecondSchedule to the Waste ManagementAct 1996 that contains any of theconstituents specified in Part II of thesame Schedule and has any of theproperties specified in Part III of thesame Schedule.
Glossary of terms used
41
Healthcare Waste: Healthcare waste isdefined as the solid or liquid waste arisingfrom healthcare. This waste comprises twofractions, namely risk waste and non-riskwaste.
Healthcare Non-Risk Waste: This iscategorised as non-risk waste. The termnon-risk is use to distinguish this waste fromhazardous waste. it should not be taken asimplying that the waste is without risk ifcarelessly handled.
Healthcare RiskWaste: This is categorisedas waste which is potentially harmful tothose who come into contact with it, due toits infectious, biological, chemical, radio-active, sharp content; It is classified ashazardous.
Incineration: a process by which heat isapplied to waste in order to reduce its bulk,prior to final disposal which may or may notinvolve energy recovery.
Material Recovery Facilities: facilitieswhere recyclables are sorted into specificcategories and processed, or furthertransported to processors for remanu-facturing.
Municipal Waste: waste from households,as well as commercial and other waste,which because of its nature or composition,is similar to waste from households, or anyother waste having any of the propertiesspecified in Part III of the Second Scheduleto the Waste Management Act, 1996 thatmay be prescribed as hazardous waste.
Packaging Waste: any material containeror wrapping, used for or in connection withthe containment, transport, handling,protection, promotion, marketing or sale ofany product or substance, including suchpackaging as may be prescribed.
PP: Polypropylene, category of plastic.
Producer Responsibility: imposesaccountability over the entire lifecycle ofproducts and packaging introduced on themarket. This means that companies whichmanufacture import or sell products and
packaging are required to be financially orphysically responsible for such productsafter the useful life.
PVC: Polyvinyl chloride, category of plastic.
Recovery: any activity carried out for thepurpose of reclaiming, recycling or re-usingwaste in whole or in part.
Recyclables: waste materials that may besubjected to any process or treatment tomake it re-useable in whole or in part.
Recycling: the subjection of waste to anyprocess or treatment to make it re-useablein whole or in part.
Residual Municipal Waste: the fraction ofmunicipal waste remaining after the sourceseparation of municipal waste fractions,such as food and garden waste, packaging,paper and paperboard, metals, glass and isusually unsuitable for recovery or recycling.
Resource Recovery: the extraction anduse of resources from waste material.
Reuse: Use the material again withoutprocessing.
Segregated Collections: entail wastecollectors collecting a range of recyclablewaste, employing separate bins for the mainwaste streams (usually dry recyclables,organic waste, and residual waste).
Thermal Treatment: a process by whichheat is applied to waste in order to reduceits bulk, prior to final disposal. Thermaltreatment can involve a number ofprocesses such as incineration, pyrolysisand gasification.
Treatment Facilities: facilities where wasteundergoes thermal, physical, chemical orbiological processes that change thecharacteristics of waste in order to reduceits volume or hazardous nature or facilitateits handling, disposal or recovery.
Waste Audit: An examination of the wastein your organisation to see the amount andtype of waste produced and how it iscurrently dealt with.
42
Waste Characterisation: The process bywhich the composition of different wastestreams is analysed.
Waste Electrical and ElectronicEquipment (WEEE):General rule if it has aplug or battery it’s WEEE. Ten Categoriesof WEEE identified: large/small householdappliances, IT & telecommunication equip-ment, consumer equipment, lightingequipment, electrical and electronic tools,toys, leisure and sports equipment, medicaldevices, monitoring and control equipment,automatic dispensers.
Waste Management Facility: a site orpremises used for the recovery or disposalof waste.
Waste Management Plan: A plan of actionoutlining recommendations for improve-ments in waste management.
Waste Prevention/Minimisation/Reduction:any technique, process or activity that eitheravoids, reduces or eliminates waste at itssource, or results in re-use or recycling.
Waste Producer: a person whose activitiesproduce waste or who carries out pre-processing, mixing or other operationsresulting in a change in the nature orcomposition of waste.
Waste Segregation: The separate of wasteinto individual material fractions at source.
Waste: any substance or object which theholder discards, or intends, or is required todiscard, and anything which is discarded asif it were a waste, as per the WasteManagement Act, 1996.
Baled and segregated material for recycling
43
APPENDIX A
Segregation and Packaging Poster for Healthcare Risk and Non-Risk Waste
Segregation of Healthcare Waste Figure 6.1 fromThe Segregation, Packaging and Storage Guidelines for Healthcare Risk Waste,
Department of Health and Children & Health Service Executive
& Standard Precautions Poster
44
45
YELLOW
BAG
��ALL BLO
OD-STAINED
OR CONTAMINATED
ITEMS IN
CLU
DING:-
DRESSINGS, S
WABS,
BANDAGES,
PERSONAL
PROTECTIVE
EQUIPMENT (GOWNS,
APRONS, G
LOVES)
��SUCTION
CATHETERS, TUBING
AND WOUND DRAINS
��INCONTINENCE
WASTE FROM KNOWN
OR SUSPECTED
ENTERIC IN
FECTIONS
NB. BAGS MUST NOT BE
USED FOR SHARP ITEMS,
BREAKABLE ITEMS OR
LIQUIDS
DO NOT OVERFILL
BAG MUST BE SECURELY
CLO
SED WITH CABLE
TIE
OR TAPE WHEN 2/3 FULL
MAXIMUM
Figure 6.1SEGREGATION OF HEALT
HCARE WASTE+–typical contents
LIQUIDS: Dan
gerous Goods Reg
ulations require the use of ab
sorben
tmaterial or gellin
g agen
t to preve
nt an
y sp
illag
es from UN packa
ging
containing h
ealthca
re risk
was
te inv
olving free
liquids
unless
the
container is sp
ecifically approved for liq
uids. All significan
t quan
tities
of liq
uid m
ust be in “leak-proof” containers.
BLACK BAG* -
FOR NON-RISK WASTE
��INCONTINENCE WEAR (from
non-
infectious patients)
� �OXYGEN FACE MASKS
��EMPTY URINARY DRAINAGE
BAGS
��CLE
AR TUBING (e.g. oxygen,
urinary catheters, ventilator, I.V.,
N.G.)
��ENTERIC FEEDING BAGS
��GIVING SETS WITH TIPS
REMOVED
��ALL OTHER HOUSEHOLD
NON-
RECYCLA
BLE
WASTE
DO NOT OVERFILL
YELLOW RIGID BIN OR BOX
WITH BLUE LID
4
��UN-REGULA
TED MEDICINAL/
PHARMACEUTICAL SUBSTANCES
i.e. products not classified as
DANGEROUS GOODS under ADR
Regulations
Note:These waste substances are
best managed by returning them for
disposal to the pharmacy in their
original packaging.
If the products belong to a different
“dangerous goods” class e.g. toxic or
flammable solids, liquids or aerosols,
they must be packaged and labelled in
accordance with their classification and
entry in ADR as instructed by the Safety
Adviser.
Notes:
(1) All bags and containers must have an individual tracing tag or label.
(2) + Containers, marking and labels for healthcare risk waste must conform to ADR requirements.
(3)* Som
e Waste Authorities may require healthcare non-risk waste to be packaged in clear, or otherwise identified plastic
bags
(4) Blue (or grey) lidded containers are suggested for this stream - see 6.4.1.3 and related footnote
YELLOW RIGID BIN
OR BOX W
ITH
YELLOW LID
��BLO
OD AND BLO
OD
ADMINISTRATION
SETS
��BODY FLU
IDS (not in
bulk)
SEE NOTE RE LIQUIDS
BELO
W��
DISPOSABLE
SUCTION LINERS
��REDIVAC DRAINS
��BIOLO
GICAL
HISTOLO
GY WASTE
��NON-CULTURED LAB
WASTE &
AUTOCLA
VED
MICROBIOLO
GICAL
CULTURES
��SPUTUM
CONTAINERS FROM
KNOWN OR
SUSPECTED TB
CASES
DO NOT OVERFILL
BOX MUST BE SECURELY
CLO
SED WHEN AT
MAXIMUM 3/4 FULL OR,
AT MANUFACTURER’S
FILL LINE
YELLOW SHARPS
BIN OR BOX
USED SHARP MATERIALS
SUCH AS:
��NEEDLE
S
��SYRINGES
��SCALP
ELS
��SHARP TIPS OF I.V.
SETS
��CONTAMINATED
SLIDES
��BLO
OD-STAINED OR
CONTAMINATED
GLA
SS
��STITCH CUTTERS
��GUIDE
WIRES/TROCHARS
��RAZORS
DO NOT OVERFILL
NOT FOR LIQUIDS
BOX MUST BE SECURELY
CLO
SED WHEN AT
MAXIMUM 3/4 FULL OR,
AT MANUFACTURER’S
FILL LINE
YELLOW SHARPS
BIN OR BOX W
ITH
PURPLE LID
��NEEDLE
S, S
YRINGES,
SHARP IN
STRUMENTS
AND BROKEN GLA
SS
CONTAMINATED WITH
CYTOTOXIC/CYTOSTA
TIC MEDICINES OR
OTHER TOXIC
PHARMACEUTICAL
PRODUCTS
DO NOT OVERFILL
NOT FOR LIQUIDS
BOX MUST BE SECURELY
CLO
SED WHEN AT
MAXIMUM 3/4 FULL OR,
AT MANUFACTURER’S
FILL LINE
YELLOW RIGID BIN
OR BOX W
ITH
PURPLE LID
��NON-SHARPS
HEALTHCARE WASTE
CONTAMINATED WITH
CYTOTOXIC/CYTOSTA
TIC MEDICINES OR
OTHER TOXIC
PHARMACEUTICAL
PRODUCTS
SEE NOTE REGARDING
LIQUIDS BELO
W
DO NOT OVERFILL
BOX MUST BE SECURELY
CLO
SED WHEN AT
MAXIMUM 3/4 FULL OR,
AT MANUFACTURER’S
FILL LINE
YELLOW RIGID BIN
OR BOX W
ITH
BLACK LID
��PLA
CENTAS (SEE
NOTE BELO
W RE
ABSORBENT
MATERIAL)
��LA
RGE ANATOMICAL
BODY PARTS
��BSE/TSE RELA
TED
BLO
OD OR TISSUE
��CONTAMINATED
LARGE METAL
OBJECTS
(SEE 6.4.1.1.4)
DO NOT OVERFILL
BOX MUST BE SECURELY
CLO
SED WHEN AT
MAXIMUM 3/4 FULL OR,
AT MANUFACTURER’S
FILL LINE
46
47
APPENDIX B
Example of Consignment Note (C1 Form) and European Waste Catalogue List (EWC)
48
WASTE MANAGEMENT (MOVEMENT of HAZARDOUS WASTE) REGULATIONS 1998 Form C.l. Consignment Note for consignments of hazardous waste transported within the State
(NOT to be used for transhipment into or out of the State) PART A (to be completed by the consignor) B (serial no.) ------- 1. Name and address of consignor1: …………………Another Hospital, Sandy Lane, Cross Roads, Dundrum, Dublin 16 ………………………………………… Tel: 01 – 987 6543 ……….. Fax: 01 - 9876544……………. 2. Name and chemical composition of waste* ……… UN3291 Clinical Waste, Unspecified, N.O.S. 6.2, II …………. 3. European Waste Catalogue/Hazardous Waste list Description(s) and Code(s)2: …. Wastes whose collection and disposal is subject to special requirements in order to prevent infection - 18 01 03 4. Origin of waste (name and address of producer, if different from 1.) ………………………………………………………… 5. Process(es) that waste originates from: ……… Healthcare treatment for Humans ……………………. 6. Quantity (indicate kg or litres): ………… 511 kg ………………………………………………………………………………… 7. Size, type3 and number of containers: … 10 x 770 litre wheeled bins. ………………….. 8. Physical characteristics4: ……… solids and liquids ………………………………………………. 9. Components which are hazardous (giving concentrations in each case): … Possible infection risk – cannot be quantified …
10. Hazardous properties5 and special handling instruction (if any): ……… May contain sharps and be infectious; wear gloves and overalls. ……………………………………………………….
11. Name and address of consignee6: …Healthcare Waste Treatment Ltd., Unit 1, Industrial Estate, Dublin 12. Responsible person – Mr XXXX XXXX, Contact Tel No. 01-1234567 12. I, the consignor, certify that the information given in Part A above is complete and correct to the best of my knowledge. Signed ……Hospital Person……………………. Date ………1/1/2010………………………… Name (block letters) …HOSPITAL PERSON………… on behalf of Another Hospital ……… Position held by person signing …………Hospital Person Position……………………………… PART B (to be completed by the carrier) 13. I, the carrier,7 certify that I collected the waste described in Part A in vehicle (reg. no.) …………… at (time) …………..on (date) …………… and that I have been informed of the hazardous nature of the waste, as set out in that Part. Signed ………Driver…………………… on behalf of … Healthcare Waste Treatment Plant plc Name (block letters) ………………………………… Signature of consignor as witness …… Hospital Person ……… PART C (to be completed by the consignee) 14. Name and address of consignee: ……………………………………….………………………………………………………………….. ………………………………………………………………… Tel: ………………………….. Fax:………………………. 15. Waste licence number (if applicable)8 …………………………….. Waste permit number (if applicable)9………………….. Certificate of registration (if applicable)10 ………………………………………………. 16. The waste described in Part A was delivered to me by (carrier) ………………………………… in vehicle (reg. No.) …………….…… at (time) ……………… on (date) ……………………. On behalf of (consignor) …………………………………………………………… 17. (a) The consignment was accepted: ………………………… (b) The consignment was rejected …………………… 18. If the consignment was rejected, state the reason(s) ………………………………………………………………………………… …………………………………………………………………………………………………………………………………………………………
19. If the consignment of waste was accepted, state the recovery/disposal activity(ies) to which it will be subject and providecode number and description of the technology involved11
………………………………………………………………………………………………………….
20. I, the consignee, certify that the information given in Part C above is complete and correct to the best of my knowledge.
Signed …………………………………………. Date …………………………………………………… Name (block letters) ………………………………… on behalf of ……………………………………………… Position held by person signing …………………………………………………… * full description may be attached on separate page Footnotes 1 to 11 see relevant definitions and lists in the "Instructions for completion of Consignment notes for Hazardous Waste'. CARRIER'S COPY - to be given to the carrier of the waste, after completion of PART C by the consignee, and retained by the carrier
49
European Waste Catalogue and Hazardous Waste List –1 January 2002
18 WASTES FROM HUMAN OR ANIMAL HEALTH CARE AND/ ORRELATED RESEARCH (except kitchen and restaurant wastes notarising from immediate health care)
18 01 Wastes from natal care, diagnosis, treatment or prevention of diseasesin humans.
18 01 01 sharps (except 18 01 03)
18 01 02 body parts and organs including blood bags and blood preserves (except 18 01 03)
18 01 03* wastes whose collection and disposal is subject to special requirements inorder to prevent infection
18 01 04 wastes whose collection and disposal is not subject to special requirementsin order to prevent infection (for example dressings, plaster casts, linen,disposable clothing, and diapers)
18 01 06* chemicals consisting of or containing dangerous substances
18 01 07 chemicals other than those mentioned in 18 01 06
18 01 08* cytotoxic and cytostatic medicines
18 01 09 medicines other than those mentioned in 18 01 08
18 01 10* amalgam waste from dental care
18 02 wastes from research, diagnosis, treatment or prevention of diseaseinvolving animals
18 02 01 sharps except (18 02 02)
18 02 02* wastes whose collection and disposal is subject to special requirements inorder to prevent infection
18 02 03 wastes whose collection and disposal is not subject to special requirementsin order to prevent infection
18 02 05* chemicals consisting of or containing dangerous substances
18 02 06 chemicals other than those mentioned in 18 02 05
18 02 07* cytotoxic and cytostatic medicines
18 02 08 medicines other than those mentioned in 18 02 07
* Asterisk beside number denotes hazardous wastes
50
51
Printed by HSE Print & DesignTel: 626 3447 Fax: 626 3159E-mail: [email protected]