water & process catalogue - scientific and environmental monitoring … · 2019-06-03 ·...

www.kenelec.com.au

TECHNICAL CATALOGUE 27

WATER & PROCESS CATALOGUE

Occupational Health & Safety Solutions

Water & Process Solutions

Environmental Monitoring Solutions

Pharmaceutical Cleanroom Solutions

Heating Ventilation Air-Conditioning & Indoor Air Quality Solutions

www.kenelec.com.au


WATER & PROCESS CATALOGUE

www.kenelec.com.au


HVAC & IAQ CATALOGUE

National Freecall No

1300 73 22 33 [email protected]

PHARMACEUTICAL CLEANROOMKenelec Scientific provides you with the full Cleanroom Installation Cycle

www.kenelec.com.au

Anthony BusuttilManaging Director

Kenelec Scientific Pty Ltd was started in 1962. Over time Kenelec Scientific has established itself as a solution provider for scientific instrumentation in areas of Occupational Health and Safety, Water Monitoring, Environmental Monitoring, Heating Ventilation Air Conditioning, Indoor Air Quality, Pharmaceutical and Cleanroom Systems.

The core values we maintain here are based on our slogan “Measuring Up”. We measure up to the excellence that exceeds customers’ expectations from the first contact to after sales support. Our aim is to build long term relationships and ultimately be a valuable ally for our customers. We pride ourselves on providing solutions which are underpinned by a Quality Management System that complies fully with ISO 9001:2008.

The Kenelec Scientific Team is made up of a very special group of people united to deliver only the best for our customers. We listen and we partner with our customers to produce the best solution tailored to their specific needs and preferences.

Some of our major international suppliers have been trading with us for many years in instrumentation

OzWater’16Kenelec Scientific was proud to exhibit at OzWater’16 in Melbourne - Australia’s premier international event for all water professionals and associated industries - with strong interest in our wide product range from the best brands in water sampling and monitoring.

With the success of our 2016 exhibition, we will be back at OzWater’17 in Sydney showcasing the best technology in the business, from economic hand held water quality meters to imaging particle equipment and tomography systems. We hope to see you there!

that is world renowned, reliable and of impeccable quality. These suppliers are constantly re-inventing and improving their technology so that you, our customer, can enjoy the benefits of the latest instrumentation, as you will see in our latest catalogue

We are also capable of installing tailored monitoring solutions which leading Pharmaceutical, Research and Medical institutions throughout Australia can attest to. Our skilled calibration engineers will assist in ensuring that you will enjoy continued reliability with minimum disruption to your businesses.

As you browse through our catalogue, you will find that our range of products is wide, as is our vast experience. Please feel free to call us for further information or assistance. We look forward to hearing from you.

Solutions to challenges

kenelec.com.au


OCCUPATIONAL HEALTH & SAFETY CATALOGUE

1300 73 22 33 kenelec.com.au


ENVIRONMENTAL MONITORING CATALOGUE

1300 73 22 33

COMING SOON

WATER & PROCESSCATALOGUE

Please note: the prices in this catalogue are provided as a guide only and are subject to change without notice. Delivery cost and GST are not included.

FS 605267

IMAGING PARTICLE ANALYSIS 2FlowCam Imaging Particle Analyser 2

How Imaging Particle Analysis Works 3

Visual Spreadsheet 3

Applications 3

WATER TREATMENT SOLUTIONS 4Hydroact Series 4

Hydroact Controllers 5

Residual Chlorine Analyser 6

Streaming Current Charge Analyser 6

Particle Counter 7

Laboratory Charge Analyser 7

UV254 Organics Monitor 8

Portable UV254 Monitor 8

Residual Ozone Analyser 9

TURBIDITY MONITORS 10Turbidity 10

PORTABLE & FIELD METERS 11pH & ORP 11

Conductivity 12

Dissolved Oxygen 13

Multiparameter 14

Water Quality Meter 17

Delta OHM, RTD Thermometers 19

PROCESS INSTRUMENTATION 20Pressure Measurement 20

Temperature Measurement 20

Clamp-On Ultrasonic Flowmeters 21

Ultrasonic Level Technology 21

SITRANS F M – Electromagnetic flowmeters 22

INDUSTRIAL TOMOGRAPHY SYSTEMS 23See Inside Your Process 23

Tomography Systems 24

Fast and accurate results you can see - backed by the quantitative data to prove it.

Most particle analysers give you a distribution of particle size only. FlowCAM® is the imaging-based particle analyser that gives you over 30 different measurements for each particle, as quickly as the other systems give you only one size measurement, based on an assumption that all particles are spherical in shape.

While particle size distributions alone may be sufficient when looking at a uniform, homogenous sample of material, in the real world most samples that people want to analyze are heterogeneous and there is usually a need to find out the composition of the sample in terms of the amounts of each individual particle type contained in the mixture.

FlowCAM adds in particle shape (morphology) measurements as well as gray-scale measurements (transparency, intensity, etc.) and color information (optionally). All of these additional measurements can then be used by FlowCAM’s VisualSpreadsheet® software to automatically characterised different particle types in the sample.

The FlowCAM® is the first automated particle analysis instrument to use digital imaging for measuring size and shape of microscopic particles in a fluid medium. With industry-leading image quality combined with automated statistical pattern recognition software, the FlowCAM imaging particle analysis system is an important tool for detecting, identifying, and quantifying microscopic particles in a variety of applications.

Two particles having the same size but very different shapes

Sample FlowCAM Display*

*Images adjusted to fit and backgrounds cleaned for printing purposes.

General Features

• Flexible and customisable system meets user-specific requirements

• Four magnifications (2X, 4X, 10X, and 20X) and various flow cell sizes are available to accommodate a broad range of sample particle sizes (2 µm to 2 mm) - easy to alternate between multiple analytical ranges

• 50µm to 5mm now available with Flowcam Macro• Sample volumes as low as .01ml accommodated• Captures particle images at up to 22 frames per

second - allows for high sampling efficiency and fast analysis times

• Intuitive VisualSpreadsheet® software for data capture and analysis

• Fully self-contained (computer, monitor, etc. included)

• Many options available including cross-polarized illumination, 488 or 532nm laser, variable emission filters, color camera and many different flow cell sizes

• Used in many industries and applications: waste water treatment, algae technology, aquatic research, pharmaceutical, municipal water, taste & odour

FLOWCAM IMAGING PARTICLE ANALYSER

FLOWCAM Imaging Particle Analyser

POA

21300 73 22 33 / [email protected]

IMAGING PARTICLE ANALYSIS

FlowCAM Architecture Block Diagram

Sample FlowCAM Display*

*Images adjusted to fit and backgrounds cleaned for printing purposes.

Visual Spreadsheet sample data

HOW IMAGING PARTICLE ANALYSIS WORKSThe FlowCAM imaging particle analysis system contains three core technologies: optics, electronics and fluidics.

The fluidics system uses an ultra-high-precision computer controlled syringe pump to pull the fluid sample through a flow cell perpendicular to the optical path.

The optical system is similar to a microscope, and is used to capture real-time images of the particles in the fluid as they pass through the flow cell. Additional optional electronics can also capture two channels of fluorescence information per particle.

The FlowCAM VS benchtop model is ideally suited to a typical laboratory environment. The flexibility of the FlowCAM VS allows you to optimise the system for counting and sizing, superior image quality, and morphology characterisation. Available in four models, from the imaging-only VS-I to the top-of-the-line VS-IV with two channels of fluorescence measurement and scatter trigger capabilities. Each system is fully upgradeable to meet your changing needs and technology improvements.

VISUAL SPREADSHEETTurn data into insight with the powerful VisualSpreadsheet® Particle Analysis Software.

VisualSpreadsheet® gives you the ability to sort and filter actual images, improving on other systems that only allow you to sort and filter rows of numeric data. Ultimately this gives you a more in-depth analysis of your sample and a better understanding of your data.

The VisualSpreadsheet® Difference

• Sort and filter particle data based upon criteria you supply - the results are displayed immediately as particle images instead of numbers

• Accomplish complex particle filtering in seconds with immediate visual feedback. Immediately find and display all similar-type particles in a heterogeneous sample with sophisticated pattern recognition capabilities

• Create and save defined particle type libraries• Captures over 30 unique particle measurements including basic shapes, morphology and gray-scale and color

measurements

Go beyond particle size with FlowCAM.

APPLICATIONS

PROCESS WATER• Taste and odour - Algae species identification• Cyanobacteria - Algae blooms• Filter fouling algae detection• Floc formation analysis• Filter efficiency monitoring

WASTEWATER TREATMENT• Microbial floc analysis• Microorganism identification• Stormwater particulate analysis• Grit removal optimisation

AQUATIC FIELD• Microorganism indentification• Ballast water studies• Invasive species studies

PHARMACEUTICAL• Protein aggregates and particles• Particle size & shape• Formulation research & development• Micro-encapsulation• Purification process development

INDUSTRIAL APPLICATIONS• Biofuel production• Food & beverage• Superabrasive materials• Wash water analysis

How IPA Works - Visual Spreadsheet - Applications

INTERESTED? CALL US TO ARRANGE A DEMONSTRATION

31300 73 22 33 / [email protected] kenelec.com.au

IMAGING PARTICLE ANALYSIS

WATER TREATMENT SOLUTIONSHydroACT Series

HYDROACT SERIES

Conductivity

Dissolved Oxygen

ORP

Chlorine Dioxide

TSS

Free & Total Chlorine

Ozone

UV254

Particle Counter

Streaming Current

pH

HIGH QUALITY & SCALABLE SOLUTION FOR WATER TREATMENT ANALYSER – CONTROLLER - TRANSMITTER

The HydroACT analyser offers a wide range of customisable capabilities to suit any user’s requirements: from a basic analyser with a single sensor and analog output, to a more comprehensive solution consisting of a controller with multiple sensors, several chemical feed control outputs, and digital communications (Modbus or PROFIBUS). Other optional features include analog and digital I/O, data logging, and remote access over LAN or GSM modem. The versatility of the HydroACT platform helps ensure a more affordable and flexible solution by allowing the user to purchase only the specific hardware and firmware components that they actually need, while allowing for upgrades to be performed at a later time if application requirements happen to change. The HydroACT analyser is available in three versions. Each version offers different levels of I/O capability.

Clearwell

TEMP

pH

CHLORINE

HydroACT 600A110:789F:F822:D9AD

Fri Mar 11 12:24:54 2016

OnlineM K N U M UVA

OnlineN N K P =NTU

OnlineS K V P =16.7¡C

%RunningN S K S =

Mode: Automatic%RunningN N K S =

Mode: Automatic

OnlineS K O Q =24.9¡C

SC Value

OnlineM =

PID

SENSOR INPUTS

CHLORINEOPTIONAL

Mix

SCM

pHALUMNTU

UV

HydroACT 600A110:789F:F822:D9AD

Fri Mar 11 12:24:54 2016

OnlineM K N U M UVA

OnlineN N K P =NTU

OnlineS K V P =16.7¡C

%RunningN S K S =

Mode: Automatic%RunningN N K S =

Mode: Automatic

OnlineS K O Q =24.9¡C

SC Value

OnlineM =

PID

SENSOR INPUTS

CAUSTIC

Example Installation Diagram

HYDRO ACT

Sedimentation Filter

Peracetic Acid


WATER TREATMENT SOLUTIONSHydroACT Controllers

HA2 HA4

HA8

HYDROACT CONTROLLERS

General Features

• Sensor Inputs – Up to 4• External Input (optional) – 4-20mA, 4-20 mA loop-powered, 0-2 VDC, 0-10VDC,

+/- 2000 mV for pH / ORP / ISE’s, Pt100, pulse and Modbus• Analog Outputs (optional) – Up to 4• Relays (optional) – Up to 8• Digital Inputs (optional) Up to 8• Alarms & Thresholds – 2 user-configurable alarms & thresholds with deadband

and delay for each parameter and control output• Control Loops (optional) – Up to 4• Control Types (optional) - PID (with start delay and SP ramping options), feed

forward (NTU/UV), flow pacing, high/low threshold, timer• Communication (optional) Modbus ASCII/RTU (RS485), Modbus TCP (Ethernet),

PROFIBUS DP• Data & Event Logging – 1 million records stored internally, storage expandable

with MicroSD card

General Features

• Sensor Inputs – Up to 8• External Input (optional) – 4-20mA, 4-20 mA loop-

powered, 0-2 VDC, 0-10VDC, +/- 2000 mV for pH / ORP / ISE’s, Pt100, pulse and Modbus

• Analog Outputs (optional) – Up to 8• Relays (optional) – Up to 16• Digital Inputs (optional) - Up to 16• Alarms & Thresholds – 2 user-configurable alarms

& thresholds with deadband and delay for each parameter and control output

• Control Loops (optional) – Up to 8• Control Types (optional) - PID (with start delay and

SP ramping options), feed forward (NTU/UV), flow pacing, high/low threshold, timer

• Communication (optional) - Modbus ASCII/RTU (RS485), Modbus TCP (Ethernet), PROFIBUS DP

• Data & Event Logging – 1 million records stored internally, storage expandable with MicroSD card

FROM$2,670

FROM$4,154

FROM$5,885

General Features

• Sensor Inputs – Up to 2• External Input (optional) – 4-20mA, 4-20 mA loop-powered, 0-2 VDC, 0-10VDC,

+/- 2000 mV for pH / ORP / ISE’s, Pt100, pulse and Modbus• Analog Outputs (optional) – Up to 2• Relays (optional) – Up to 4• Digital Inputs (optional) Up to 4• Alarms & Thresholds – 2 user-configurable alarms & thresholds with deadband

and delay for each parameter and control output• Control Loops (optional) – Up to 2• Control Types (optional) High/Low Threshold• Communication (optional) Modbus ASCII/RTU (RS485), Modbus TCP (Ethernet),

PROFIBUS DP• Data & Event Logging – 1,000 event / status records stored in internal memory

SENSORSSensors Ranges Number of Available Parameters From

Free Chlorine* 2, 5, 10, 20, 200 mg/L 1 (Free Cl) $4,391

Total Chlorine* 2, 5, 10, 20 mg/L 1 (total Cl) $4,391

Chlorine Dioxide* 0.5, 2, 5, 10, 20 mg/L 1 (CIO2) $4,629

Chlorite* 2 mg/L 1 (Chlorite) $5,129

Ozone* 0.2, 0.5, 2, 5, 10, 20 mg/L 1 (O3) $4,866

pH with Temp* 0-14 2 (pH, Temperature) $1,317

ORP* -1999 to 1999 mV 1 (ORP) $1,563

TSS/NTU* 50-4,000 NTU, 0-20 g/l 3 (% solids, mg/L (or ppm), NTU) $8,247

Streaming Current -1000 to 1000 SCV 3 (SCV, Motor RPM, Signal Health) See package price page

UV254* 0-100% UVT, 0-2 UVA 2 (UVT, UVA) $11,953

Conductivity* 0-1,000 mS/cm2 2 (Conductivity, Temperature) $2,196

Torodial Conductivity* 0-2,000 mS/cm2 2 (Conductivity, Temperature) $4,110

Dissolved Oxygen* 0 to 50 mg/L 0-450% Saturation 3 (mg/L, % Saturation, Temp) $6,201

Particle Counter 2 to 100 micron 6 (Up to 6 Size Bins – counts or ppb) See package price page

*Prices do not include flow cells or mounting hardware, please contact Kenelec Scientific for system pricing.


WATER TREATMENT SOLUTIONS

HYDROACT REAGENTLESS CHLORINE ANALYSER

HYDROACT WITH DURATRAC 4

RESIDUAL CHLORINE ANALYSER

STREAMING CURRENT CHARGE ANALYSER

FROM$6,938

FROM$15,293

Residual Chlorine Analyser - Streaming Current Charge Analyser

The HydroACT Reagentless Chlorine Analyser takes online disinfection monitoring to a new level of reliability by offering industry-leading performance, an excellent track record of EPA Method 334.0 compliance, reduced pH dependency, and no requirement for zero calibration. Chemtrac’s line of membrane covered Free and Total Chlorine sensors have no moving parts, no bottles of reagent to change out monthly, and quarterly maintenance takes less than five minutes to perform. HydroACT offers a versatile solution to your disinfection monitoring needs with the flexibility to accept additional sensors, as well as offering expandable I/O and PID control loops.

Benefits

• Lower total cost of ownership• Easy set up and maintenance• Intuitive menu and programming functions

Applications

■ WATER TREATMENT• Online disinfection monitoring• Disinfection dosage control

■ COOLING TOWERS ■ SWIMMING POOLS ■ PAPER MACHINE SYSTEM MICROBIAL CONTROL ■ LEGIONELLA CONTROL ■ FOOD WASHING

The HydroACT Analyser with DuraTrac 4 Streaming Current Sensor is Chemtrac’s most reliable and accurate Streaming Current Monitor, providing unique and versatile capabilities for optimising coagulant or polymer dosing. With improved Streaming Current measurement capability, expansive I/O, state of the art chemical feed logic, and the ability to monitor additional parameters key to coagulation (e.g. pH, UV254, NTU), this revolutionary product offers a dependable, comprehensive, and scalable approach for tackling virtually any water treatment scenario. A well designed interface gives the user easy access to frequently used features like zero offset. Intelligent diagnostics, service reminders, advanced alarm features, and optional email/text alerts all work together to notify the user when service is required or when process conditions having changed sufficiently to warrant attention.

Benefits

• Capability of incorporating multiple measurements that are key to coagulation, such as pH, TSS/NTU, and UV254 organics

• Multiple chemical feed control options with overfeed protection, start delay, setpoint ramping, and other advanced features

• State of the art features like signal health diagnostics and pH compensation

Applications

■ WATER TREATMENT• Respond quickly to NTU/organics changes• Optimise coagulant usage• Reduce sludge generation• Improve clarifier performance• Extend filter run time• Reduce membrane fouling• Monitor for overfeed of filter aids

■ WASTEWATER TREATMENT• Respond quickly to changes in solids• Reduce polymer usage• Improve performance of DAF, Thickener, BFP, Centrifuge

■ PAPERMAKING• Track changes in wet-end charge• Improve paper machine performance and paper quality

Single Flow Cell Double Flow Cell


WATER TREATMENT SOLUTIONS

PC3400

LCA-01 / LCA-02 / LCA-03

PARTICLE COUNTER

LABORATORY CHARGE ANALYSER

FROM$8,695

FROM$13,372

Particle Counter - Laboratory Charge Analyser

The PC3400’s performance reliability, ease of use, and measurement capability make it an ideal choice for online filter performance monitoring and optimisation. This is most clearly demonstrated in the PC3400’s ability to detect filter breakthrough often hours in advance of any NTU change. Close to two decades of customer experience with Chemtrac’s Particle Counters has proven the effectiveness of this technology to take water quality monitoring to the next level. Chemtrac’s PC3400 is the right choice if the optimisation demands of your application are not being met by relative and less sensitive measurements of water quality like those provided by turbidimeters or SDI test systems.

Benefits

• Provides a reliable and accurate measurement of particles down to low ppt levels• Advanced firmware and menu functions eliminates need for external software to

perform setup and calibration• User friendly calibration routine makes calibration fast, simple, and lowers

maintenance cost• Large display shows all 8 particle size channels at once, plus graph of last 64

readings and other sensor performance info• External sensor is easy to clean and water is kept away from electronics

Applications

■ WATER TREATMENT ■ WASTEWATER TREATMENT ■ REVERSE OSMOSIS PRETREATMENT ■ MEMBRANE FILTRATION ■ BOILER/CONDENSATE ■ PARTS WASHING ■ FOOD & BEVERAGE ■ PHARMACEUTICAL

The Laboratory Charge Analyser (LCA) is an essential coagulation optimisation tool for the water treatment professional. The LCA allows the user to determine the ideal coagulant dosage needed to achieve optimum NTU and TOC reduction in less than 5 minutes typically, earning it the moniker “5 minute jar tester”. The process of finding the optimum dosage simply involves feeding in a measured volume of coagulant into the raw water sample until the reading on the LCA indicates complete charge neutralisation has been obtained. Some pH adjustment may be required to achieve accurate test results. An option for pH measurement allows the user to also quickly determine the dosage rate of additives like lime or caustic when needed to raise the coagulation pH of low alkalinity waters. Titration of the coagulant and pH adjustment additives can be performed manually using the LCA-1, or with the touch of a button using the auto-titration features that come standard on models LCA-2 and LCA-3. The automatic titration feature further simplifies the testing process and helps ensure the most accurate results possible.

Benefits

• Quickly determine optimum dosage of coagulant needed to achieve charge neutralisation and optimise NTU and TOC removal

• Great for assessing minimum dosage of base needed to raise pH in low alkalinity waters to optimise coagulation

• Large sample size and magnetic stirrer ensures accurate results


WATER TREATMENT SOLUTIONSOrganics Monitor

UVM5000

UVP1000

UV254 ORGANICS MONITOR

PORTABLE UV254 MONITOR

FROM$12,033

FROM$3,715

The UVM5000 provides online continuous organics monitoring utilising a 254 nm ultraviolet light source. The amount of light absorbed provides an ongoing indication of natural organic matter (NOM) in a flowing sample, and serves as a continuous surrogate measurement for total organic carbon (TOC). More specifically, UV254 is the best detector of aromatic or reactive organics which when combined with chlorine, can form disinfection by-products (DBPs). The patent pending Ortho-Beam technology provides many significant advantages while maintaining affordability. The monitor’s unique ability to automatically detect and compensate for UV lamp fluctuations and quartz fouling minimises losses in accuracy over time, and significantly reduces maintenance.

Benefits

• Surrogate measurement for TOC/DOC• Reduced need for cleaning• Continuous compensation for lamp drift and cuvette fouling• No reagents• Much lower cost than other online organics monitors• Very low maintenance costs

Applications

■ WATER TREATMENT• Detect changes in coagulant demand• Monitor organics removal• Optimise UV disinfection systems• Monitor potential for disinfection byproducts (DBPs)

■ DISTRIBUTION SYSTEM MONITORING• Detect system contamination

■ WASTEWATER TREATMENT• Monitor effluent discharge

Portable unit with 1 minute warm-up time, 254nm wavelength UV light source, Displays either UV Transmittance or UV Absorbance values, Simple calibration, User friendly interface, Built-in fault detection. OPTIONAL FEATURES - Battery power pack.

Benefits

• Surrogate measurement for TOC/DOC• No reagents• Much lower cost than other UV254 Analysers• Very low maintenance costs

Applications

■ WATER TREATMENT• Detect changes in coagulant demand• Monitor organics removal• Monitor potential for disinfection byproducts (DBPs)

■ DISTRIBUTION SYSTEM MONITORING• Detect system contamination

■ WASTEWATER TREATMENT• Monitor effluent discharge


WATER TREATMENT SOLUTIONSResidual Ozone Analyser

HYDROACT SERIES

RESIDUAL OZONE ANALYSER

FROM$7,746

Chemtrac’s Ozone Analysers utilise the very latest and best ozone sensors available in the world today. The membrane covered sensor is insensitive to changing pH and interference from other oxidants, uses no reagents, is extremely stable, and has a reduced maintenance requirement compared to most other Ozone sensors. Up to 4 Ozone sensors can be connected to a single HydroACT analyser, or mix and match by connecting 1 Ozone sensor along with other measurement like pH, ORP, or conductivity.

Benefits

• Stable and reliable - excellent process control• Suitable for all potable, process and salt waters• No reagents or moving parts• Up to 6 months between maintenance• Up to 3 months between calibration• Resistant to detergents in the water

Applications

■ OZONE DOSING CONTROL FOR:• Water Treatment• Cooling Towers• Hospitals• Laundry• Food Preperation• Hospitals• Secondary Ozonation• Remote Sites

Standard Optional

HydroACT System Overview Screenshot HydroACT Graph Screenshot


ANALITE NEP395 TURBIDITY PROBE ANALITE NEP9500 TURBIDITY PROBE

FROM$3,000

FROM$2,400

ANALITE NEP5000 USB HAND HELD TURBIDITY SENSOR

The ANALITE NEP5000 Turbidity sensor known for extreme accuracy and flexibility now comes with a new hand held display device. Through USB interface the most cost effective turbidity sensor becomes the worlds most cost effective hand held. Simply team it up with a tablet, Laptop, or phone.

General Features

• Completely customisable, can be ordered to the end user’s particular requirements

• Designed for use in bio-active waters and where sediment build up is likely

• Integral wiper assembly and optional copper case.• Fast accurate calibration• Three range settings: low medium and high• Range hopping (between three ranges)• Ranges- Low example 0-10NTU, Medium example

0-400NTU, High example 0-1,000NTU• Wiper behaviour settings• SubCon Marine connector available

FROM$3,250*

ANALITE NEP5000 TURBIDITY PROBE

The ANALITE NEP5000 series of digital turbidity probes are designed for monitoring and process applications where ultimate sensor flexibility is a consideration. This probe offers a multitude of physical sensor variations, with the further benefit of a PC interface that allows the user to easily Calibrate, Modify Range modes, and adjust sensor output modes and data characterisation.

General Features

• Completely customisable, can be ordered to the end user’s particular requirements

• Designed for use in bio-active waters and where sediment build up is likely

• Integral wiper assembly and optional copper case• Fast accurate calibration• Three range settings low medium and high• Ranges - Low example 0-10NTU, Medium example

0-400NTU, High example 0-1,000NTU• Auto range hopping (between the three ranges)• Wiper behaviour settings• Depth ratings up to 400 meters

The ANALITE NEP395 is a microprocessor based turbidity probe for monitoring and process applications where turbidity levels up to 5,000NTU may be encountered. The probe uses 90˚ optics and employs infrared light in accordance with ISO7027.

General Features

• Comes in Delrin Case• Designed for use in bio-active waters and where

sediment build up is likely• Integral wiper assembly• SDI-12/RS232 output• Glanded cable (specify cable length)• Wiper behaviour settings• 40, 100, 400, 1,000, 3,000 and 5,000NTU – range

selection set by user• Depth ratings up to 100 meters

The ANALITE NEP 9500 analogue output turbidity probe is designed for monitoring and process applications where turbidity levels of up to 3,000 NTU may be encountered. The probe uses 90˚ optics and employs infrared light in accordance with ISO7027.

General Features

• Designed for use where bio-fouling or sedimentation build up is likely

• Integral wiper assembly• 100, 400, 1,000NTU and 3000NTU ranges available• Depth ratings up to 100 meters

FROM$2,800

TURBIDITY

*Price does not include tablet, laptop or phone.

NEP-TAB WINDOWS 8 INCH TABLET WITH NEP-5000-USB SOFTWARE INSTALLED FROM $570

NEP-TURB-LINK NEP-TURB-LINK is a wireless interface for the new NEP-5000 family of sensors. The freedom to port data directly to a phone, tablet or laptop. Comes with a 5 meter cable. (Sensor not included).

$800**Price does not include tablet, laptop or phone.

ANALITE NEP495 TURBIDITY / TEMP LOGGER

FROM$4,300

ANALITE NEP495P turbidity probes can monitor and log turbidity and temperature in a sturdy self-contained package that is easy to set up and easy to selectively download the data collected.

General Features

• Designed for use where bio-fouling or sedimentation build up is likely

• Integral wiper assembly• Can store over 30,000 data sets• Requires no external power or commands once

logging has commenced• Battery life expectancy of over 30,000 data sets

or 60 days, whichever comes first and assuming a wipe prior to each reading

• 40, 100, 400, 1,000, 3,000 and 5,000NTU – range selection set by user

• Depth ratings up to 100 meters


TURBIDITY MONITORSTurbidity

pH & ORP

NEW HORIBA LAQUAact 100 SERIES

FROM$755

Introducing the new LAQUAact 100 series water quality instruments from Horiba. These instruments are designed for one hand operation and come with an IP67 waterproof rating and shock-resistant casing. The 100 series use about 10% of the power compared to conventional meters, making them ideal for long periods of field operation. This series includes great features such as a large backlit LCD display, so no problem for challenging applications including dark places. Finally, add the standard 2 year warranty and you have a great package.

General Features

• Shock Resistant – Polycarbonate resin as used in automobiles and mobile phones• IP67 rated waterproof and dustproof casing. IP67 – fully waterproof for

approximately 30minutes in 1m of water• Chemical resistant casing• Backlit display (except PH 110) for easy reading• Battery life >1,000 hours (PH 110 & PH 120) and > 500 hours (PH 130)• PH 110 – Single Channel, pH/ORP/Temp (°C), waterproof, shockproof & security

function• PH 120 – Single Channel, pH/ORP/Temp (°C), waterproof, shockproof, security

function, backlit LCD, PC connection, datalogging, date/time stamping• PH130 – Dual Channel, pH/ORP/Temp (°C)/Ion, waterproof, shockproof, security

function, backlit LCD, PC connection, datalogging, date/time stamping

Package Deals

■ PH110-K $755• Includes PH110 meter• 9651-10D plastic body, gel-filled pH electrode• pH 4/7/10 solutions (60ml)• Rugged carry case

■ PH120-K $840 • Includes PH120 meter• 9651-10D plastic body, gel-filled pH electrode• pH 4/7/10 solutions (60ml)• Rugged carry case

■ PH130-K $980 • Includes PH130 meter• 9651-10D plastic body, gel-filled pH electrode• pH 4/7/10 solutions (60ml)• Rugged carry case

WTW PROFILINE pH METERS

For people who want a reliable, simple and easy to use portable pH meter, the pH 3110 is the right choice. If high capacity data logging is required the pH3310 has an interval controlled data logging function for up to 5000 records: perfect for long term recording in the field.

General Features

• Robust meter housing plus 100% waterproof and easy to clean keypad• 100% waterproof USB interface for field measurement (3310 series only)• Keys with tactile feedback for error-free operation• Built in calibration timer for reliable results• Three year warranty on meters and one year warranty on probes

Options

■ pH 3110 SET 2 Easy to operate, robust pH/mV-meter with large LCD display, for mobile routine measurement. Meter in carry case with pH-sensor SenTix 41, buffer solution STP 4 and STP 7, stand, beaker, short instruction manual, CD-ROM and batteries.

■ pH 3310 SET 2 Professional, field proven pH/mV meter with backlit graphic display for portable application with data logger and USB interface. Meter in carry case with pH-sensor SenTix 41, buffer solution STP 4 and STP 7, stand, beaker, CD-ROM, driver software for USB, batteries & cable.

pH 3110

pH 3310


PORTABLE & FIELD METERSpH & ORP

CONDUCTIVITY

HORIBA LAQUAact 100 SERIES

WTW PROFILINE CONDUCTIVITY METERS


General Features


approximately 30minutes in 1m of water• Chemical resistant casing• Backlit display (except EC 110) for easy reading• Battery life >2,000 hours (EC 110 & EC 120)• EC 110 – Single Channel, EC/TDS/Res/Temp(°C), waterproof, shockproof &

security function• EC 120 – Single Channel, EC/TDS/Res/Sal/Temp(°C), waterproof, shockproof,

security function, backlit LCD, PC connection, datalogging, real time clock

Package Deals

■ EC110-K $795• Includes EC110 meter• 9382-10D plastic-body, Titanium/Platinum black, conductivity cell• Conductivity standard solutions (60ml) - 84 uS/cm, 1413 uS/cm, 12.88 mS/cm

& 111.8 mS/cm solutions• Rugged carry case

■ EC120-K $949 • Includes EC120 meter• 9382-10D plastic-body, Titanium/Platinum black, conductivity cell• Conductivity standard solutions (60ml) - 84 uS/cm, 1413 uS/cm, 12.88 mS/cm

& 111.8 mS/cm solutions• Rugged carry case

The Cond 3110 is a reliable conductivity meter with temperature compensation for routine measurements in natural waters and wastewater.

The Cond 3310 is designed for conductivity measurements in changing media. With its large memory and its waterproof USB interface, this meter is ideal for the capture of large data volumes including date, time and ID number.

General Features


Options

■ COND 3110 SET 1 Easy to operate, robust conductivity meter with large LCD display, for routine field application, for 2 and 4 electrode cells, set includes TetraCon 325. Meter in carry case including 4-electrode conductivity cell Tetracon 325, standard solution 1413 µS/cm at 25˚C, stand, beaker, short instruction manual, CD-ROM and batteries.

■ COND 3310 SET 1 Professional, field proven conductivity meter with backlit graphic display for field application including data logger and USB interface. Meter in carry case including 4-electrode conductivity cell Tetracon 325, standard solution 1413 µS/cm at 25˚C, stand, beaker, CD-ROM, driver software for USB, batteries & cable.

Cond 3110

Cond 3310

FROM$795

EASY-TO-CLEAN

ROBUST SEALED SILICONE KEYPAD – 100% WATERPROOF


PORTABLE & FIELD METERSConductivity


General Features


approximately 30minutes in 1m of water• Chemical resistant casing• Backlit display (except DO110) for easy reading• Battery life >500 hours (DO 110 & DO 120)• DO 110 – Single Channel, DO/Temp(°C), waterproof, shockproof & security

function• DO 120 – Single Channel, DOl/Temp(°C), waterproof, shockproof, security

function, backlit LCD, PC connection, datalogging, real time clock

Package Deals

■ DO110-K $1,229• Includes DO110 meter• 9551-20D Galvanic DO probe, 2m cable• Rugged carry case

■ DO120-K $1,529 • Includes DO120 meter• 9551-20D Galvanic DO probe, 2m cable• Rugged carry case

DISSOLVED OXYGEN


WTW PROFILINE PORTABLE OXYGEN METERS

The Oxi 3205 is an easy to use and portable routine meter for the measurement of dissolved oxygen.

The Oxi 3310 is a top of the line portable meter for dissolved oxygen with a modern, user friendly user interface. The output of the measured results is either as concentration, saturation or partial pressure. It has an interval driven data logger and memory for 5,000 entries.

General Features


Options

■ Oxi 3205 SET 1Easy to operate, robust DO meter with backlit LCD graphic display, for routine measurement, set including CellOx 325. Meter in carry case including galvanic DO sensor CellOx 325, cleaning solution, electrolyte, 3 exchange membrane heads, stand, beaker, short instruction manual, CD-ROM and batteries.

■ Oxi 3310 SET 1 Professional, field proven DO meter with backlit graphic display for portable application including data logger and USB interface, set including CellOx 325. Meter in carry case including galvanic DO sensor CellOx 325, cleaning solution, electrolyte, 3 exchange membrane heads, stand, beaker, short instruction manual, CD-ROM and batteries. Driver software for USB, cable.

DO110

Oxi 3205

DO120

Oxi 3310

FROM$1,229


PORTABLE & FIELD METERSDissolved Oxygen

MULTIPARAMETER

WTW MULTILINE IDS DIGITAL MULTI-PARAMETER PORTABLE METERS

With the MultiLine IDS meters the measuring signal is not processed in the instrument, it is generated directly in the sensor and transmitted to the meter with additional information. For documentation purposes and traceability, all measuring values are completed with instrument and sensor data; on demand also with user information.

General Features

• Three models with one, two or three universal channels• Measure parameters either sequentially or simultaneously• Waterproof housing and rubber armour in all sets• Large keys & defined pressure points, ensure reliable operation, even while

wearing gloves• Two waterproof USB interfaces (for data transmission to a PC and data direct

to USB)• Three year warranty on meters and one year warranty on probes

Options

■ MULTI 3410 SET 1 Professional digital multi meter for portable field measurement, with single channel input, colour graphic display incl. data logger and USB interfaces. Case set with digital IDS pH electrode SenTix 940, QSC Kit, short instruction manual, stand, beaker, CD-ROM, driver software for USB, rechargeable batteries, cable, universal power supply, armouring SM Pro.

■ MULTI 3420 SET C Professional digital multi meter for portable field measurement, with dual channel input, colour graphic display incl. data logger and USB interfaces. Multi case set with IDS sensors: digital pH electrode SenTix 940, digital conductivity 4-electrode cell TetraCon 925, QSC Kit, short instruction manual, stand, beaker, CD-ROM, driver software for USB, rechargeable batteries, cable, universal power supply, armouring SM Pro.

■ MULTI 3430 SET F Professional digital multi meter for portable field measurement, with triple channel input, colour graphic display incl. data logger and USB interfaces. Large multi case set with IDS sensors: digital pH electrode SenTix 940, digital conductivity 4-electrode cell TetraCon 925, optical DO probe FDO 925, QSC Kit, short instruction manual, stand, beaker, CD-ROM, driver software for USB, rechargeable batteries, cable, universal power supply, armouring SM Pro.

Multi 3410 IDS Multi 3420 IDS Multi 3430 IDS

MULTI 3510 IDS MULTI-PARAMETER PORTABLE METER

The Multi 3510 IDS is a compact portable multi-parameter instrument for applications with digital IDS pH/ORP electrodes, dissolved oxygen sensors, conductivity cells or turbidity sensors. Calibration records and additional information are stored in the sensor.

General Features

• One meter for three parameters: pH/ORP, dissolved oxygen or conductivity• Future proof prepared for wireless sensor technology• QSC function for optimum tracking of sensor quality

Options

■ MULTI 3510 IDS SET 1 Professional multi-parameter handheld for IDS electrodes. Wireless ready. With single channel input, backlit display, built-in data logger and USB interface. Meter in case set including SenTix 940 with short instruction manual, CD-ROM including software, batteries and USB cable.

■ MULTI 3510 IDS SET 3 Professional multi-parameter handheld for IDS electrodes. Wireless ready. With single channel input, backlit display, built-in data logger and USB interface. Meter in case set including TetraCon 925 with short instruction manual, CD-ROM including software, batteries and USB cable.

■ MULTI 3510 IDS SET 4 Professional multi-parameter handheld for IDS electrodes. Wireless ready. With single channel input, backlit display, built-in data logger and USB interface. Meter in case set including FDO 925 with short instruction manual, CD-ROM including software, batteries and USB cable.

NEW


PORTABLE & FIELD METERSMultiparameter

MULTIPARAMETER

FROM$4,464

HORIBA U-50 SERIES

Measure and display up to 11 parameters simultaneously pH, ORP, DO, conductivity, salinity, TDS, seawater specific gravity, temp, turbidity, depth, GPS

General Features

• Easy to read LCD display• One-hand operation• On-screen icon displays battery power, GPS, USB and probe unit connectivity• Quick-connect connector (cable to control unit)• Shock resistant cover made of chemical resistant materials • Backlight display• Turbidity sensor conforms to US EPA method 180.1• Minimum dissolved oxygen sensor maintenance with screw-on type membrane cap• Field replaceable sensors• 10,000 data sets can be stored in the field and downloaded later• Auto calibration feature provides hassle free calibration of pH, DO, conductivity,

turbidity and depth – all while working in the field

Each model has a choice of 2m, 10m or 30m cable.

Models with 2m cable

All models include a soft back-pack type bag, sensors, auto-cal solutions and manuals.

■ U51 FROM $4,464 ■ U52 FROM $4,839 ■ U52G FROM $5,430 ■ U53 FROM $6,649 ■ U53G FROM $7,499 ■ U54 FROM $6,206 ■ U54G FROM $6,999

Options

■ SOFTWARE AND CABLE $129 ■ HARD HEAVY DUTY CARRY CASE FROM $598

U-51 U-52 U-52G U-53 U-53G U-54 U-54G

pH

ORP

DO

Conductivity

Salinity

Total Dissolved Solids

Seawater specific gravity

Temperature

Turbidity (LED) 0.1NTU

Turbidity (Tungsten Lamp) 0.01NTU

Depth (non-vented) not on 2m cable

GPS (latitude & longitude)

SPECIFICATION SUMMARY FOR HORIBA U-50 SERIES

USB Connector

Keypad

Strap

Cable connector

Available Unavailable

Large 3.4in LCD display with backlight

pH

Oxidation Reduction Potential

Reference

Conductivity

Dissolved Oxygen

Turbidity

RENT ME



MULTIPARAMETER


FROM$1,529


General Features


approximately 30minutes in 1m of water• Chemical resistant casing• Backlit display for easy reading• Battery life >200 hours (PC 110) and > 500 hours (PD 110)• PC 110 – Dual Channel, pH/ORP/EC/TDS/Res/Sal/Temp(°C), waterproof,

shockproof, security function, backlit LCD, PC connection, data-logging, real time clock

• PD120 – Dual Channel, pH/ORP/DO/Temp(°C), waterproof, shockproof, security function, backlit LCD, PC connection, data-logging, real time clock

Package Deals

■ PC110-K $1,529• Includes PC110 meter• 9651-10D plastic body, gel-filled pH electrode• 9382-10D plastic-body, Titanium/Platinum black, conductivity cell• pH 4.01, pH7.00 solutions (60ml), 1413 uS/cm, 12.88 mS/cm solutions (60ml)• Rugged carry case

■ PD110-K $1,920 • Includes PD110 meter• 9651-10D plastic body, gel-filled pH electrode• 9551-20D Galvanic DO probe, 2m cable• pH 4.01, pH7.00, pH10.01 solutions (60ml)• Rugged carry case

LAMOTTE TC3000WE/WI

A compact water analysis instrument designed for precision measurements of Turbidity, Chlorine and Colour. The TC3000 is equipped with an advanced microprocessor to drive a patent pending optical system that permits EPA or ISO compliant measurements for the water and wastewater analyst.

General Features

• Measures turbidity from 0 to 4,000 NTU• Measures chlorine 0 to 10ppm• Measures colour from 0 to 500CU• Meets ISO 7027/EPA 180.1 for turbidity meters• 4,000 point data logging, time and date stamped

Options

■ TC3000 WE Turbidity (EPA 180.1), Chlorine (EPA 330.5), Colour (Standard Methods 2120B). Supplied with 0, 1, and 10 NTU standards, sample bottle, 4 sample tubes, 100 each free and total chlorine DPD tablets, and USB cable and computer/wall adapter.

■ TC3000 WL Turbidity (ISO 7027), Chlorine (Standard Methods 4500-CI-G), Colour (Standard Methods 2120B). Supplied with 0, 1, and 10 NTU standards, sample bottle, 4 sample tubes, 100 each free and total chlorine DPD tablets, and USB cable and computer/wall adapter.

NEW



LAQUATWIN - COMPACT WATER QUALITY METER

WATER QUALITY METER

FROM$140

HORIBA introduces the LAQUAtwin compact water quality meter, incorporating 60 years of water quality analyser research and manufacturing technology into a pen sized, simple design. Select from seven water quality parameters such as pH, conductivity, various ions (Na+, K+, NO3-, Ca2+) and salinity that suits your purpose. Bring LAQUAtwin with you wherever and whenever you want to. It is your “lab-in-the-field.”

General Features

• Accurate reading from only a single drop, in a few seconds. Furthermore, select measurement method depending on your situation and sample. (Drops, immersion, scoop, wipe, solid samples, powders, paper, textiles and films)

• pH, conductivity, ions and salinity. 7 parameters, 11 models• Calibrate and measure at the touch of a button – the smiley face will tell you when

the result can be read• LAQUAtwin is fully waterproof and dustproof (IP67)• Carry case comes standard for storage and portability

Options

■ PH 11 COMPACT PH METER +/- 0.1 PH ACCURACY $140 (2 POINT CALIBRATION) ■ PH 22 COMPACT PH METER +/- 0.01 PH ACCURACY $175 (3 POINT CALIBRATION) ■ PH 33 COMPACT PH METER +/- 0.01 PH ACCURACY $210 (5 POINT CALIBRATION) ■ EC 11 COMPACT EC METER 0 -1999uS/CM, $140 2.00 - 19.99mS/CM (2 POINT CALIBRATION) ■ EC 22 COMPACT EC/TEMP METER 0 -1999uS/CM, $175 2.00 - 19.99mS/CM, 20 -199.9mS/CM (2 POINT CALIBRATION) ■ EC 33 COMPACT EC/TEMP METER 0 -1999uS/CM, $210 2.00 - 19.99mS/CM, 20 -199mS/CM, TDS: 0 – 99.9PPM, 100- 999PPM, 1000 – 9990PPM (3 POINT CALIBRATION) ■ SALT 11 COMPACT SALT METER (CONDUCTIVITY CONVERSION $175 METHOD) 0 – 100.0PPT 0% - 10.00% (2 POINT CALIBRATION) ■ B-721 COMPACT SALT METER (ISE METHOD) $495 ■ B-722 COMPACT SODIUM ION METER $495 ■ B-731 COMPACT POTASSIUM ION METER $495 ■ B-741 COMPACT NITRATE ION METER (CROP KIT) $785 ■ B-742 COMPACT NITRATE ION METER (SOIL KIT) $859 ■ B-743 COMPACT NITRATE ION METER (GENERAL PURPOSE) $495 ■ B-751 COMPACT CALCIUM ION METER $569


PORTABLE & FIELD METERSWater Quality Meter

Kenelec Scientific is very happy to add the Horiba LAQUA 1000 Series of Benchtop Water Quality Meters to our range. Horiba has combined their vast development experience with extensive customer feedback to come up with the LAQUA range of laboratory meters. The HORIBA LAQUA series marries advanced technology with stylish design and an easy-to-use touch screen interface. The LAQUA series was developed as durable meters offering long term reliability for laboratory professionals. Advanced functionalities and a wide array of electrodes provide high precision measurement with improved response time in a huge variety of applications.

General Features

• Intuitive and easy to use – large scratch-proof and chemical resistant glass display• 360° manoeuvrability – light-weight electrode stand and height-adjustable stopper

controls• Electrode status – alert when electrode deteriorates and programmable calibration

reminders• Stability function – fuzzy logic used to determine when measurement value is

stable• Diagnostic messages – up to 10 error codes to facilitate troubleshooting• Data management – internal memory, auto log function, time-stamping with real-

time clock and serial/USB output• GLP / GMP – serial number, calibration data, electrode condition, date/time

stamping and electrode parameters

pH METERS CONDUCTIVITY

MULTI-PARAMETER METERS

For pH measurement, there are 3 meters available:

■ PH1100• pH/ORP/Temp (°C) Measurement• +/- 0.01 pH Accuracy• 0.1/0.01 pH Resolution• Auto Shut-Off, Auto-Hold• RS232 Output

■ PH1200• pH/ORP/Temp (°C) Measurement• +/- 0.003 pH Accuracy• 0.1/0.01/0.001 pH Resolution• Auto Shut-Off, Auto-Hold• USB, RS232 Output• Data Logging• Real-time Clock and Date/Time stamping

■ PH1300• pH/ORP/Ion/Temp (°C) Measurement• +/- 0.003 pH Accuracy• 0.1/0.01/0.001 pH Resolution• Ion Range 0.00 ug/l to 9999 g/l• Auto Shut-Off, Auto-Hold• USB, RS232 Output• Data Logging• Real-time Clock and Date/Time stamping

Package Deals

■ PH1100-S $860• PH1100 Benchtop pH/ORP/Temp Custom LCD Meter Set • Integrated electrode stand• glass pH/Temp electrode (9615S-10D)• pH 4.01/7.00/10.01 buffers & 3.33M KCl reference electrolyte

■ PH1200-S $1,029• PH1200 Benchtop pH/ORP/Temp Custom LCD Meter Set • Integrated electrode stand• glass pH/Temp electrode (9615S-10D)• pH 4.01/7.00/10.01 buffers & 3.33M KCl reference electrolyte

■ PH1300-S $1,170• PH1300 Benchtop pH/ORP/ISE/Temp Custom LCD Meter Set • Integrated electrode stand• glass pH/Temp electrode (9615S-10D)• pH 4.01/7.00/10.01 buffers & 3.33M KCl reference electrolyte

For Conductivity measurement, there is one meter available:

■ EC1100• EC/TDS/Res/Sal/Temp (°C) Measurement• Auto Shut-Off, Auto-Hold• USB, RS232 Output• Diagnostic Messages• Data Logging• Real-time Clock and Date/Time stamping

Package Deals

■ EC1100-S $1,100• EC1100 Benchtop COND/RESI/SAL / TDS/Temp, Custom LCD meter• Integrated electrode stand• Conductivity electrode plastic body (9382-10D)• Conductivity standard solutions 84 uS, 1413 uS, 12.88 mS & 111.8 mS

In the multi-parameter benchtop measurement instruments, there is one meter available:

■ PC1100• Dual Channel pH/ORP/EC/TDS/Res/Sal/Temp (°C) Measurement• Auto Shut-Off, Auto-Hold• USB, RS232 Output• Diagnostic Messages• Data Logging• Real-time Clock and Date/Time stamping

Package Deals

■ PC1100-S $1,845• PC1100 Benchtop pH/ORP/COND/RESI/SAL/TDS/Temp, Custom LCD meter, 2• channel• Integrated electrode stand• Conductivity electrode (9382-10D), pH electrode glass body (9615S-10D)• Conductivity standard solutions 84 uS, 1413 uS, 12.88 mS & 111.8 mS• pH 4.01/7.00/10.01 buffers & 3.33M KCl reference electrolyte

LAQUA 1000 SERIES BENCHTOP WATER QUALITY METER

WATER QUALITY METER

NEW


PORTABLE & FIELD METERSWater Quality Meter

The HD2307.0 is a portable instrument with a large LCD display. It measures temperature using Pt100 or Pt1000 immersion, penetration, contact or air probes. The sensor can be a Pt100 3 or 4 wires, Pt1000.

General Features

• Probes fitted with auto detection module• Factory calibration settings are inherent to the probes• IP67 protection degree• Measurement range -200…+650˚C• Instrument Accuracy +/- 0.05˚C• All units come in a case with batteries and instructions

Package Deals

■ INSTRUMENT MODEL HD2307 WITH IMMERSION PROBE MODEL TP49A (SENSOR Pt100) $588

The HD2107.1 and HD2107.2 are portable instruments with a large LCD display fitted with one input. The HD2127.1 and HD2127.2 are fitted with two inputs. They measure temperature using Pt100 or Pt1000 immersion, penetration, contact or air probes. The sensor can be a Pt100 3 or 4 wires, Pt1000, Ni1000 or NTC 2 wires.

General Features

• HD 2107.1 & HD2107.2 fitted with RS232C serial port for data transfer• HD2107.2 is a datalogger and memorises up to 80,000 samples• Measurement range -200…+650˚C• Instrument Accuracy +/- 0.01˚C• All units come in a case with batteries, instructions & DeltaLog9 software• Probes fitted with auto detection module• Factory calibration settings are inherent to the probes• IP67 protection degree

Package Deals

■ INSTRUMENT MODEL HD2107.1 WITH IMMERSION PROBE TP49A (SENSOR Pt100) $770 ■ INSTRUMENT MODEL HD2107.2 WITH IMMERSION PROBE TP49A (SENSOR Pt100) $1,297

HD2307.0 HD 2107.1 & HD2107.2

DELTA OHM, RTD THERMOMETERS

NEW NEW


PORTABLE & FIELD METERSTemperature

PROCESS INSTRUMENTATION

SITRANS LH100 PRESSURE TRANSMITTER

SITRANS P COMPACT

SITRANS P200/210/220 FIXED RANGE TRANSMITTER

SITRANS P280 WIRELESSHART PRESSURE TRANSMITTER

SITRANS LH100 submersible pressure transmitter is used for hydrostatic level measurements. It is immersed in the process connected by a vented cable. The sensor has a stainless steel enclosure and is suitable for applications ranging from drinking water to corrosive liquids.

For the special requirements of the food and beverage, pharmaceutical and biotechnology industries.

The increased hygiene demands are satisfied by a range of stainless steel process connections. Cleaning and sterilisation procedures (CIP, SIP) are standard practice.

The fixed range transmitter for gauge and absolute pressure.

Options

■ SITRANS P200 POA Ceramic diaphragm

■ SITRANS P210 POA Stainless steel diaphragm

■ SITRANS P220 POA Stainless steel diaphragm fully welded

The SITRANS P280 is a WirelessHART pressure transmitter that provides all measured process values as well as diagnostic information, parameters and functions via wireless communication. The device is powered by an internal battery and designed for ultralow power consumption. The compact and rugged design makes it specially suitable for direct mounting on tanks and pipes in remote parts of plants, and on moving or rotating equipment for process monitoring or asset management applications.

POAPOA

POA POA

PRESSURE MEASUREMENT

TEMPERATURE MEASUREMENT

SITRANS TS300 - FOR FOOD AND PHARMA SITRANS TS500 - FOR PIPES AND VESSELS

Our food and pharma temperature sensor product series is featured with a wide range of appropriate process connections – the classical method. With the clamp-on temperature sensor Siemens strikes a new path. Comparable with built-in measurement regarding response time and accuracy the advantages especially at small pipe diameters are obviousl. No welding and welding validation, no process disturbance, easy pigging, easy dismantling for recalibration.

The industry temperature sensor series supports a wide field of measurements, from simple applications up to solutions for harsh environments. Designed as a modular system of tubular or barstock thermowell, extension, connection head and optional transmitter and display, the customers profit from the use of standard components for individual applications. Intrinsically safe versions are available as well as Ex d.

POA POA


PROCESS INSTRUMENTATIONPressure Measurement - Temperature Measurement


CLAMP-ON ULTRASONIC FLOWMETERS

CLAMP-ON ULTRASONIC FLOWMETERS

The key feature of the clamp-on ultrasonic flow technology is the externally mounted sensors. They are quickly and easily installed on the outside of the pipe, making them the perfect choice for retro-fit applications and applications where corrosive, toxic or high pressure liquids and gases rule out the option of cutting the pipe. The technology provides highly accurate measurement of both liquids and gases on pipes ranging from DN 6 to DN 9140 (0.25” to 360”) in size.

Options

■ SITRANS FUP1010 POA Portable meter

■ SITRANS FST020 POA For basic water, wastewater and HVAC applications

POASITRANS FUP1010 SITRANS FST020

SITRANS PROBE LU SITRANS LUT400

ULTRASONIC LEVEL TECHNOLOGYSiemens is the world leader in ultrasonic level technology. SITRANS LUT400 is an easy to use and highly accurate level, volume and pump controller. For advanced solutions controllers are available with remotely mounted non-contacting ultrasonic transducers. Whether you select the transmitter or the controller you get a cost-effective non-contacting solution for a wide range of applications in virtually any industry.

2-wire, loop powered ultrasonic transmitter for level/volume/flow monitoring of liquids in storage vessels, simple process vessels, and open channels.

Compact, single point ultrasonic controller for continuous level or volume measurement of liquids, slurries, and solids, and high accuracy monitoring of open channel flow.

POA POA

RUGGED ECHOMAX TRANSDUCERS

Built for harsh environments. They are impervious to dust, moisture, corrosion, vibration, flooding, and extreme temperature. They are easy to install and virtually maintenance-free.

POA


Flow Measurement - Level Measurement


MODULAR PULSED DC METERS SITRANS F M DN 2 TO DN 2000 (1/12“ TO 78“)

BATTERY-OPERATED WATER METERS MAG 8000 DN 25 TO DN 1200 (1‘‘ TO 48‘‘)

HIGH-POWERED AC METERS TRANSMAG 2 / 911/E DN 15 TO DN 1000 (1/2‘‘ TO 40‘‘)

SITRANS F M – ELECTROMAGNETIC FLOWMETERSMeasure the volume flow of electrically conductive fluids like e.g. water, chemicals, food and beverage, slurries, sludge, paper stock, and mining slurries with magnetic particles. The SITRANS F M product range is divided into three meter types:

General Features

• Full transmitter program MAG 5000/MAG 6000/ MAG 6000 I compact or remote mounting

• Multiple I/O as standard and communication modules PROFIBUS PA/DP, FOUNDATION Fieldbus, HART and Modbus RTU

Options

■ MAG 5100 W POADesigned for water and waste - water applications

■ MAG 3100 P POADesigned for process industry and the harsh requirements in the chemical industry

■ MAG 3100/MAG 3100 HT POADesigned for general process industry

■ MAG 1100/1100 HT POADesigned for general process industry

■ MAG 1100 F POADesigned for food and beverage and pharmaceutical industries

Designed for the water industry, the MAG 8000 program is a battery-powered solution that makes it easier than ever to install a reliable water meter virtually anywhere.

General Features

• Battery lifetime up to 6+ years• Mains powered 24 V AC/DC, 115 V AC/230 V AC with battery backup• IP68 (NEMA 6P) enclosure for sensor and transmitter in compact or remote

version• MAG 8000 for abstraction and distribution network • MAG 8000 CT for revenue and bulk metering• MAG 8000 Irrigation for agriculture

Specially designed for heavy mining slurries with or without magnetic particles as well as the most difficult applications in the pulp and paper industry.

General Features

• A wide choice of corrosion-resistant liner materials• Heavy duty industrial enclosure• No movable parts

MAG 5100 W

MAG 1100 F

MAG 3100/MAG 3100 HT

POA POA


Flow Measurement

INDUSTRIAL TOMOGRAPHY SYSTEMS

SEE INSIDE YOUR PROCESSKenelec Scientific is proud to represent the ITS range of products in the Australian market. Industrial Tomography Systems plc (ITS) is a world leader in process tomography. The company provides a range of electrical based tomography systems for research and process applications. These systems are unique – designed around patented technologies, expertise and in-depth knowledge built up over more than 12 years of experience and numerous industrial applications. Instrumentation, software and sensors from ITS are used to characterise a wide range of multiphase processes including mixing, separation, flow and reactions. ITS uses two distinct technologies to see what is taking place inside your process. Electrical Resistance Tomography (ERT) and Electrical Capacitance Tomography (ECT).

Electrical Resistance Tomography (ERT)

The basic principles of electrical resistance tomography (ERT) are to take multiple measurements at the periphery of a process vessel or pipeline and combine these to provide information on the electrical properties of the process volume. ERT is applied to visualise multiphase unit processes to develop understanding; optimise performance and provide a basis of control. The most common processes relate to mixing, separation, flow and reactions.

An ITS electrical resistance tomography system consists of:

• Sensor Array These are a set of electrodes grouped in measurement channels, each of which delivers a cross-sectional image

• Instrument ITS provides two main instrument platforms, p2+ which is robust, operates up to 8 measurement planes and highly configurable and the v5r which operates 2 measurement planes at high speeds

• Software This provides three functions. Firstly it configures the instrument to fit the process conditions; secondly it analyses raw voltage measurements using inverse algorithms to provide a conductivity map; thirdly it has built in tools to allow analysis and export of tomographic data

Electrical Capacitance Tomography (ECT)

The basic principles of electrical capacitance tomography (ECT) are to take multiple measurements at the periphery of a process vessel or pipeline and combine these to provide information on the electrical properties of the process volume. ECT is applied to visualise multiphase unit processes to develop understanding; optimise performance and provide a basis of control. The most common processes relate to multi-phase flows and fluidised beds.

An ITS electrical capacitance tomography system consists of

• Sensor Array These are a set of electrodes grouped in measurement channels, each of which delivers a cross-sectional image

• Instrument The ITS main ECT instrument platforms is the m3c which operates 1, 2 or 3 measurement planes

• Software This provides three functions. Firstly it configures the instrument to fit the process conditions; secondly it analyses raw voltage measurements using inverse algorithms to provide a conductivity map; thirdly it has built in tools to allow analysis and export of tomographic data


INDUSTRIAL TOMOGRAPHY SYSTEMS

The P2+ ERT unit is a robust system that offers new and improved capabilities for research and industrial processes. The instrument operates by taking data from an array of 16 electrodes in contact with the process media. These are either mounted on a baffle / dip-pipe or around the circumference of the pipe or vessel. These data are processed to provide a conductivity map of the sensing zone. Supplied to customers all round the world (with installations at NASA to subsea operation and customers in each major continent), it has been designed and developed by ITS based on expertise in process tomography and improved over the years in performance and functionality drawn from customer feedback.In contrast to many systems-based measurement techniques, tomography sensors are able to rapidly sense throughout a volume. Thus providing a dynamic picture of what is going on inside a pipe or vessel, e.g. whether a system is homogeneous.

General Features

• Single modality (ERT) • The instrument can be provided in 2 sizes - compact (1 or 2 planes) and full

(expandable up to 8 planes) • Units can be supplied as rack mounted to be fitted in cabinets and enclosures

or as free standing units for laboratory use• Intrinsically safe module certified to EEx ia II C T6, available to operate linear

and circular tomo-graphy systems in a hazardous environment

Applications

Batch mixing, CFD Validation, Crystallisation, Filtration, Fluidised Beds, Hydrocyclones, Hydrogenation, Inline Mixing, Level Detection, Multiphase Flow, Packed beds, Polymerisation, Scale Up

The v5r is the newest ERT instrument from ITS and is suitable for a wide range of research applications. The instrument operates by taking data from an array of 32 electrodes which can be non-intrusive. Developed in collaboration with Leeds University and supported by the Technology Strategy Board, the v5r is a simple to use, high performance device, based on a new voltage-voltage measurement technique. This means that the instrument is able to respond to changing process environments, optimising its performance without the need for re-calibration, and has the added benefit of delivering a much wider performance envelope, thereby producing high quality data in large vessels (diameters over 4m) or highly conducting media (brine and other highly ionic substrates).

General Features

• Single modality (ERT) • Max number of electrodes – 2 x 16 arranged in 1 and 2 planes

Applications

Multiphase flow characterisation, CFD Validation, Filtration, Fluidised Beds, Packed Beds, Pneumatic Conveying, Extrusion

The m3c is ITS’s ECT instrument and is suitable for a wide range of research applications. The instrument operates by taking data from an array of 12 electrodes which can be non-intrusive. Supplied to customers all round the world with customers in each major continent, it has been designed and developed by ITS based on expertise in process tomography and improved over the years in performance and functionality drawn from customer feedback. The m3c primary operation is electrical capacitance tomography, although real and imaginary measurements can be taken.

General Features

• Max 24 electrodes arranged in 1,2,3 planes

Applications

CFD Validation, Extrusion, Filtration, Fluidised Beds, Packed Beds, Pneumatic Conveying

Package Options

■ FLOW-ITOMETERprovides visual and quantitative information on pipeline contents live and in real time

■ FROTH-ITOMETERdesigned to accurately measure foam, liquid, and air levels in a variety of level detection applications

■ MIX-ITOMETERdesigned for use in batch mixers and provides information on average concentration and mixing index

■ LEVEL-ITOMETERprovides level detection in challenging applications such as organic-aqueous interfaces, liquid-foam interfaces and suspended solids

POA

POA

P2+ ELECTRICAL RESISTANCE TOMOGRAPHY SYSTEM V5R ELECTRICAL RESISTANCE TOMOGRAPHY SYSTEM

M3C ELECTRICAL CAPACITANCE TOMOGRAPHY SYSTEM

TOMOGRAPHY SYSTEMS

POA


“Our goal at Kenelec Scientific is to have service that is not just great

but legendary.”

“Sharing our knowledge and experience to find innovative solutions for your business.”

“We tailor complete solutions according to your business needs

and preferences, employing the best technologies – Solving

today’s concern with tomorrow’s technology.”

“Our focus is to deliver support services that ‘measure up’ beyond

your expectations.”

Meet TEAM KENELEC:

KENELEC SCIENTIFICOver many years, Kenelec Scientific has built up a strong service team and a matching company culture. Our extensive range of experiences allows us to operate as a one-stop shop for sales, installation, documentation, service, training and calibration. We have a lot of experience in delivering systems for water and process applications for example, Water Authorities, Water Operators, GMP, Hospitals, Pharmaceutical, Government, University Laboratories and more. We will always use a consultative approach to your critical application to come up with an innovative and comprehensive solution.

Here are some of the services we provide to support your water and process requirements:

FS 605267

765 / WATER / 15732 / JU16

For further information please contact:

1300 73 22 33 (National Freecall No.)

[email protected]

Victoria

23 Redland Drive,Mitcham VIC 3132 T +61 3 9873 1022

New South Wales

Bldg 5, 49 Frenchs Forest RoadFrench Forest NSW 2086 T +61 2 8977 4017T +61 2017

Kenelec Scientific Pty Ltd

VISA, MASTERCARD, AMEX AcceptedPlease note: the prices in this catalogue are provided as a guide only and are subject to change without notice. Please check at time of purchase. Delivery cost and GST are not included. (4% +GST surcharge on AMEX)All pricing is in Australian dollars and is correct at time of printing.

Installation & Commissioning Support

Kenelec Scientific can provide comprehensive installation and commissioning services to ensure your water analysis and process instrumentation equipment operates as required.

Calibration and Service Support

Kenelec Scientific can offer full calibration and maintenance services for your water analysis and process instrumentation both on site and in our Melbourne Laboratory, saving you time and money. These critical functions ensure that your equipment remains reliable whilst meeting regulatory demands.

Validation Services

Kenelec Scientific can provide validation documents (such as Installation and Operational Qualifications and Training Documentation) according to your unique requirements. Kenelec can also provide rigorous on site completion/execution of these validation protocols.

Support and Training

The expert technical team at Kenelec Scientific can offer customer support tailored to your needs, as well as user product training to ensure your staff are adept in the use of the installed system and instrumentation. At Kenelec, we are with you every step of the way.

water & process catalogue - scientific and environmental monitoring … · 2019-06-03 ·...

Documents