waterproofing - wsw
TRANSCRIPT
wswcorp.com 1-800-325-6851 [email protected] 125
Table of ContentsWaterproof . . . . . . . . . . . . . . . . . 126MasterSeal 581 (Formerly Thoroseal) . . 126MasterSeal 582 (Foundation Coating) . . 127MasterEmaco A660 (Formerly Acryl 60) . 127Anti-Hydro . . . . . . . . . . . . . . . . . . . . . . . . 128All Purpose Brush . . . . . . . . . . . . . . . . . . 128Protection Board . . . . . . . . . . . . . . . . . . 128Rapid Crete Waterproofing . . . . . . . . . . 129Elasto-Deck Bt . . . . . . . . . . . . . . . . . . . . 130Rapid Crete Rapid Plug . . . . . . . . . . . . . 130MasterSeal 590 (Formerly Waterplug) . . 131
wswcorp.com 1-800-325-6851 [email protected] 126
Wat
erpr
oof
What is waterproofing?
Making an object or structure waterproof or water-resistant so that water will not penetrate the surface .
• Cement-based waterproof coating for interior & exterior• Must mix with MasterEmaco A660 admix• Resistant to both positive and negative hydrostatic pressure• NSF approved – suitable for use in drinking water• Suitable for above or below ground use• Can be brushed or sprayed on
MasterSeal 581 (Formerly Thoroseal)
Sku Description Quantity 160257 50 Lbs. – White 48/Pallet 160263 50 Lbs. – Gray 48/Pallet
WARNING: This product contains Crystalline Silica, a chemical known to the State of California to cause cancer, and Chromium, a chemical known to the State of California to cause reproductive harm. For more information visit www.P65Warnings.ca.gov.
CoverageOne coat is usually sufficient for damp proofing. The first coat should be applied at a thickness of about 25 mils (approx. 2 lbs. per sq. yard). If waterproof-ing is required, a second coat will be necessary. The second coat should be applied at a thickness of about 15 mils (approx. 1 lb. per sq. yard).
• Approx. 225 Sq. Ft./50 LBS. Bag at 25 mils thick.• Approx. 450 Sq. Ft./50 LBS. Bag at 15 mils thick.
wswcorp.com 1-800-325-6851 [email protected] 127
Can’t find what your looking for?To search this catalog press Ctrl + F
Waterproofing
• Water-based acrylic emulsion that enhances that improves adhesion and durability
• Stable – will not re-emulsify in water• Interior and exterior• Suitable for above or below ground use
Normal mixing ratio is 1 part MasterEmaco to 3 parts clean water. If increased performance is desired, the ratio can be increased to 1 to 2 or even 1 to 1.
MasterEmaco A660 (Formerly Acryl 60)
Sku Description Quantity 160275 1 Gal. Bottle 4/Case 160281 5 Gal. Pail 36/Pallet
WARNING: This product contains Formaldehyde (Gas), a chemical known to the State of California to cause cancer . For more information visit www.P65Warnings.ca.gov.
TestingTest DescriptionTimeResultASTM C-67 Water Absorption NA 3.9%FED SPEC TT-P-0035 Impact Strength NA 24 lbs.FED SPEC TT-P-0035 Hardness 21 Day 47 lbs.ASTM E-96 Water-Vapor Transmission NA 12 perms
CoverageOne coat is usually sufficient for damp proofing. The first coat should be applied at a thickness of about 25 mils (approx. 2 lbs. per sq. yard). If waterproofing is required, a second coat will be necessary . The second coat should be applied at a thickness of about 15 mils (approx. 1 lb. per sq. yard) .• Approx. 225 Sq. Ft./50 LBS. Bag at 25 mils thick.• Approx. 450 Sq. Ft./50 LBS. Bag at 15 mils thick.
Apply First Coat . Apply Second Coat .
DAY 1 DAY 2 DAY 3
Allow 24 hours drying time between coats.
• Cement-based waterproof foundation coating for exterior use only• Specially formulated for exterior, below ground use• Must mix with MasterEmaco A660• Resistant to both positive and negative hydrostatic pressure
MasterSeal 582 (Foundation Coating) Sku Description Quantity 160269 Gray 50 Lb. Bag 48 Bags/Pallet
WARNING: This product contains Crystalline Silica, a chemical known to the State of California to cause cancer, and Chromium, a chemical known to the State of California to cause reproductive harm. For more information visit www.P65Warnings.ca.gov.
Apply Protection Board and fill remaining area with dirt
wswcorp.com 1-800-325-6851 [email protected] 128
Protection Board
Sku Description Quantity 120456 3/8” x 4’ x 50” 45 Bndl./Pallet
• Used to protect waterproof coatings on walls from jagged rocks that could potentially chip the coating
• Lightweight folded foam protection board, for quick installation• Expanded Polystyrene Foam board meets HUD Specification,ASTM
C578 and ESR 1788• Does not sustain mold and mildew growth.FOR MORE INFORMATION SEE www.insulfoam.com/
• Tough wood handle with white tampico fibers• Wide range of uses• Natural fiber that absorbs water• Hanging holes in handle base
All Purpose Brush Sku Description 673012 4” All Purpose Brush 673018 7” All Purpose Brush 673008 6.5” Red Handle Water Paint Brush
Anti-Hydro Sku Description Quantity 100542 1 Gal. 6 Gals./Case 100545 5 Gal. 36 Pails/Pallet
• Admix that dramatically increases the strength and density of concrete, mortar, and grout
• Mix in wet concrete – not a topical treatment
• Makes concrete waterproof
• For standard jobs, mix 1 part anti-hydro with 10 parts water by volume, then add to cement
• Anti-hydro can be used undiluted with fresh portland cement for “hot plugging”
• Non-corrosiveFor more information see www .anti-hydro .com
wswcorp.com 1-800-325-6851 [email protected] 129
Can’t find what your looking for?To search this catalog press Ctrl + F
Waterproofing
FAST SETTING – READY IN 4 HOURS!
Apply First Coat .
Day 1
Apply Second Coat .
4 Hours Later
Apply Protection Board and fill remaining area with dirt
8 Hours Total
CoverageOne coat is usually sufficient for damp proofing. The first coat should be applied at a thickness of about 25 mils (approx. 2 lbs. per sq. yard). If waterproofing is required, a second coat will be necessary . The second coat should be applied at a thickness of about 15 mils (approx. 1 lb. per sq. yard).• Approx. 225 Sq. Ft./50 LBS. Bag at 25 mils thick.• Approx. 450 Sq. Ft./50 LBS. Bag at 15 mils thick.
Acrylic Preblended in Bag!
Rapid Crete Waterproofingis ideal for hand application.
Rapid Crete Waterproofing Pallet Sku Description Quantity Deposit 160730 50 Lbs. – Gray 56/Pallet $24.00
• Ideal for waterproofing masonry and concrete surfaces• Cement-based waterproof coating• Just add water!• No additives needed!• Suitable for above or below ground use• Suitable for brush or spray application• Can be used in ponds• When used in ponds, allow 24 hours curing time before refilling pond• Fill and empty pond twice to remove alkali and dust particles before adding any fish
TestingTest Description Time ResultASTM C-266 Gilmore Initial Set 35 Minutes NA ASTM C-266 Gilmore Final Set 50 Minutes NA ASTM C-579 Compressive Strength 6 Hours 1502 psiASTM C-579 Compressive Strength 1 Day 2125 psiASTM C-579 Compressive Strength 7 Day 2831 psiASTM C-579 Compressive Strength 28 Day 3806 psiASTM C-307 Tensile Strength 28 Day 497 psiASTM C-531 Shrinkage 28 Day 0.068%ASTM C-580 Flexural Strength 28 Day 1225 psiASTM C-580 Modulus of Elasticity 28 Day 1,256,073 psiASTM C-580 Secant Modulus of Elasticity 28 Day 993,848 psi
WARNING: This product contains Crystalline Silica, a chemical known to the State of California to cause cancer, and Chromium, a chemical known to the State of California to cause reproductive harm. For more information visit www.P65Warnings.ca.gov.
wswcorp.com 1-800-325-6851 [email protected] 130
FOR MORE INFORMATION SEE www.pacpoly.com/products/fluid-applied-system/elasto-deck-bt/
TestingTest DescriptionResultASTM D-412-98 Tensile Strength 436 PSIASTM D-412-98 Percent Elongation 700%ASTM D-751-00 Hydrostatic Pressure Resistance 94 PSI
CoverageOne coat is usually sufficient for damp proofing. If waterproofing is required, a second coat will be necessary . • Approx. 40 Sq. Ft./Gallon at 30 mils thick.
Elasto-Thane 500
Elasto-Deck 2nd Coat
Elasto-Deck 1st Coat
Foundation
Protection Board
Elasto-Deck Bt
Sku Description Quantity 100103 5 Gal. 48/Pallet
• Black elastomeric waterproof membrane• Apply with airless sprayer, roller, brush, or squeegee• Pre-mixed – no additives needed• Works on concrete, block, wood, metal and other surfaces• Horizontal and vertical surfaces• Not for use in drinking water tanks• Meets astm: c-836-89• Larr #: 24330
WARNING: This product contains Toluene Diisocyanate a chemical known to the State of California to cause cancer . For more information visit www.P65Warnings.ca.gov.
Rapid Crete Rapid Plug
Sku Description Quantity 160760 5 Gal. 36/Pallet
WARNING: This product contains Crystalline Silica, a chemical known to the State of California to cause cancer, and Chromium, a chemical known to the State of California to cause reproductive harm. For more information visit www.P65Warnings.ca.gov.
Fast setting waterproof mortar used to repair cracks and holes in masonry, even when water is flowing.
Bagged product for easy storage
and reuse
Plug holes even as waters flowing!
wswcorp.com 1-800-325-6851 [email protected] 131
Can’t find what your looking for?To search this catalog press Ctrl + F
Waterproofing
• Cement-based, one-component water-stop repair mortar• Fast setting – will set above or below water• NSF approved – suitable for use on drinking water systems• Expands to lock in place• Durable – maintains volume stability over time
MasterSeal 590 (Formerly Waterplug)
Sku Description Quantity 160296 1 Gal. Can 4/Case 160303 5 Gal. Pail 36/Pallet
WARNING: This product contains Crystalline Silica, a chemi-cal known to the State of California to cause cancer . For more information visit www.P65Warnings.ca.gov.
Before After