watersports & fishing 931 - aqua services · 2020. 1. 20. · fishing accessories rod holders...

Boats Walker Bay Boats 932 - 933

Paddles / Oars & Oarlocks 934 - 936

In atables & Ski Towing Boat Mirrors 936 - 937

Ski Towing Accessories 937

Kwik Tek 939 - 947

In atable Pumps & Accessories 948 - 949

Fishing Accessories Rod Holders 949 - 953

Pot Pullers 954

Downriggers 955

Downrigger Accessories 956 - 959

Fish Finder Mounts 959

Nets & Bait Timers 960

Holders & Storage Accessories Utility Holders 960 - 962

Drink Holders 963 - 965

Miscellaneous Key Floats 965

Seasickness & Showers 965

Clothes Pins & Hammocks 966

Dog Toys 966

WATERSPORTS & FISHING 931

Simply Smart.

WATER

SPOR

TS

932 Walker Bay Boats

Add-a Tube Kit 10F

Variable Pro le Design (VPD) tube with easy-grip handles, anodized aluminium mounting rack, stainless steel hardware, foot pump and tube repair kit.WBB 5000010006 10F-RID310R

Add-a Sail Kit 10F, High Performance Sail Kit Sloop Rig

75 sq ft jib and main sail with window, aluminium rudder & •daggerboard, lines and hardwareRecommended for use with rigid in atable dinghies (or light wind & •experienced sailors)

WBB 99131 SK10RIDHPWBB 5000010008 10 sailing kit

Add-a Sail Kit 8S, Performance Plus Sail Kit Marconi Rig

50sq ft radial Mylar sail with window, aluminum rudder, aluminum •dagger board, lines and hardwareRecommended for use with rigid in atable dinghies•

WBB 99130 SK8RIDPPWBB 5000010007 8 sailing kit

Walker Bay 10F Add-Ons

Model 10F Colour LOA Beam Depth Weight Max Load

WBB 30450 White 9'8" 4'9" 24" 126 lbs 449 lbs

*Hulls do not come complete with seats, they must be ordered separately*

WBB 3000030144 Seat package, Grey

High Impact Marine Composite (HIMC) hulls use a specially formulated UV protected resin for maximum impact resistance and toughness, with an easy to clean, nonadhesive surface. The meticulously designed lapstrake hull design provides a structural framework for tremendous strength and rigidity.

Model 8s Colour LOA Beam Depth Weight Max Load

WBB 3012052 White 8'3" 4'4" 21" 71 lbs 425 lbs

*Hulls do not come complete with seats, they must be ordered separately*

WBB 3000030157 Seat package, Grey

Walker Bay 8SIncludes 6.5’ Hydro Curve oars •Passengers: 2 •Max HP Rating: 2 hp •

The unique Wheel in the Keel means almost anyone can manoeuvre the boat into the water

All boats come with an integrated oar system that includes the Hydro Curve oars with detachable

performance blades, oar collars, steel-back oarlocks and ush-mount oarlock sockets on the hull

Common Features:One piece HIMC hull •Wheel in the Keel •Seats with positive otation •Steel back oarlocks •Stainless steel bow eye •One way drain plug •Add-a Tube ready •

Add-a Tube Kit 8S

RID Tube Kit Features a durable variable pro le design (VPD) tube with easy-grip handles, anodized aluminium mounting rack, stainless steel hardware, foot pump and tube repair kit. WBB 91700 8S-RID275RWBB 91702 8S-RID275H, Hypalon tube

Walker Bay 8S Add-Ons

Walker Bay 10FIncludes 7’ Hydro Curve oars •Integrated cockpit oor with nonskid pads •Reinforced ergonomic gunwale •Adjustable rowing footrest •Cup holders •Passengers: 3 •Max HP Rating: 3 hp •

WATER

SPOR

TS

► NOTE: Walker Bay Boats are sold through a network of stocking dealers

933Walker Bay Boats

Walker Bay Hydro Curve OarWalker Bay's integrated oar line boasts the precision of CAD/CAM technology, and a craftsman's attention to quality, elegance and nish. With the ingenious design of our detachable performance blade and Ergogrip handle, we've achieved the ultimate in lightness, strength, performance and practicality. Sold by the each.WBB 99226 7' oarWBB 99270 Blade only

Walker Bay Accessories

WBB 23012 Wheel kit for WB8WBB 26010 Wheel kit for WB10WBB 18100 10 white keel coverWBB 17012 Open sail keel cover wht

WBB 23026 One-way drain plug 2003 or newer

WBB 975000 PVC repair kit

WBB 99262 S/S oarlock/socket comboWBB 23042 8 oarlock kit w/ adapter (pr)WBB 23043 10 oarlock w/ adapter (pr)WBB 17046 Single oarlock socket adapterWBB 23030 Oar lock sockets only (pr)WBB 23038 Oar lock sockets adapterWBB 23039 White oarlocks (pr)

WBB 17366 In ation gaugeWBB 91600 High pressure foot pumpWBB 91601 Low press.foot pump-rid tubes

WBB 99112 Rod holder

WBB 23050 Keel cover kit,8'white

WBB 4000040002 Grey mooring cover w/ bay 10WBB 4000040003 Grey mooring cover 275 ridWBB 4000040004 Grey mooring cover 310rid

99262

17366

975000

973000

9160191600

23039

WATER

SPOR

TS

934 Oars / Paddles

TH Marine Paddle HolderMade of super tough, molded polymers, with a matte black nish.THM PK-1-DP

Caviness Kayak Paddles

Kayak Paddles come with a yellow blade and a black plastic-clad super strong aluminum shaft that extends fully into the blade length for internal reinforcement and pre-installed drip rings. The take-down coupling feature allows the blades to run parallel or feathered 90° by simply depressing the spring-loaded button and turning the shaft 1/4 turn.

Blade Dimensions: 7-1/2" x 19"•Shaft Diameter: 1-1/8" •

CAV K70Y 7'CAV K75Y 7-1/2'CAV K80Y 8'

Blade dimensions: 6" x 20"•Shaft diameter: 1-1/8" •

CAV KR70Y 7'CAV KR75Y 7-1/2'CAV KR80Y 8'

Caviness Power Grip OarsLightweight•Economical•Even load distribution•Comes with foam grips•

CAV BWSU-50 5'CAV BWSU-55 5-1/2'CAV BWSU-60 6'CAV BWSU-65 6-1/2'CAV BWSU-70 7'CAV BWSU-75 7-1/2'CAV BWSU-80 8'CAV PG-SU Replacement foam grip

Caviness Beaver Tail Paddles

These paddles come with the features the most avid canoeist requires, including a multi-ply laminated shaft for added strength and maximum ex.

Lightweight•Affordable•Excellent balance•

CAV 845BL 4-1/2'CAV 850BL 5'CAV 855BL 5-1/2'

Caviness Synthetic Paddles

Works just like a wooden paddle but has the bene ts of plastic. Has a comfortable palm grip, fully plastic clad aluminum shaft and fully aluminum reinforced high impact 6-1/2" plastic blade.CAV SP40Y Yellow, 4'CAV SP45Y Yellow, 4-1/2'CAV SP50Y Yellow, 5'CAV SP45BE Beige, 4-1/2'CAV SP50BE Beige, 5'

Kwik TekTelescoping Paddles With Bag

These lightweight paddles adjust easily to variable lengths with a simple twist. A section of the aluminum shaft disappears inside the blade to allow for compact storage under boat seats or in PWC storage compartments. The corrosion-resistant aluminum shaft, high-impact molded blade and boat hook handle, and hassle-free locking device ensure years of service. The bright orange blade is great for signalling in emergencies.KWI P-1 20" - 45" for low pro le boats and PWCs. KWI P-2 20" - 45" for low pro le boats and PWCs,

nylon storage bag includedKWI P-3 25" - 72" for higher pro le boats

Caviness Two-Piece Oar

A 2-piece oar that is lightweight, economical, and has power grips, plus the extra feature of stow-ability, made possible with a take-down Twist ‘N Lock coupling.

Approximate blade dimensions: 5" x 21"•CAV 100J-65 6-1/2'

Caviness Twin Stripe Paddles

These RD series paddles come with the Caviness wedge insert as a standard feature. This cross grain end lamination process provides the butt of the paddle blade with a feature normally applied to only very expensive paddles. CAV RD-40 4'CAV RD-45 4-1/2'CAV RD-50 5'CAV RD-55 5-1/2'

WATER

SPOR

TS

935Paddles / Oarlocks

Scotty Kayak StabilizerFeel secure and stable in your kayak while shing with the Scotty Stabilizers attached to your kayak. Made with easy to in ate inner bladders which offer over 30 lb of extra buoyancy. Scotty’s new Locking Posts make installation and removal quick and easy.

Each pontoon includes 4 permanently attached •D-rings, and a Scotty adjustable mounting system for easy installation and removalEach 28" anodized aluminum support arm includes one Scotty •mounting baseThe 30" long x 8”diameter (zipper opening) pontoons are made •of heavy PVC coated outer shell material.

SCO 302** Request item

The No. 302 Stabilizer system can easily be adapted to t on most canoes by using the Scotty No. 249 clamp mount accessory (not included).

Caviness Kiddy Kayak PaddlesThis paddle is lightweight and economically priced.

Blade: 6-1/8" x 14"•Shaft diameter: 1-1/8" •

CAV KK50Y 5'CAV KK55Y 5-1/2'CAV KK60Y 6'

Sea-Dog Chromed Zinc Clamp-on OarlockShank 2" long, 1/2" diameter•Length: 5-3/8"•Sold in pairs•

SED 582060-1

Sea-Dog Chromed Zinc OarlocksHorn: shank 1/2" diameter x 2"•Mount: shank 1/2" x 4-5/8" wide•Sold in pairs•

SED 580411-1 Horn pinnedSED 580451-1 Angle mount

The 580770 is a ribbed, open horn pattern and the 580790 and 580791 are round closed horns in size #0 and #1 respectively.

1/2" shanks•Sold in pairs•

SED 580770-1 Ribbed horn, 2"SED 580790-1 Round horn, 2"SED 580791-1 Round horn, 2-1/4"SED 580800-1 Regular socketSED 580810-1 Side plate socketSED 580820-1 Angle plate socket

580800

580770

580280

580810

580790/91

Sea-Dog Bronze Oarlocks and Sockets

Sea-Dog Galvanized Oarlocks and Sockets

The 580870 and 580871 are round, closed horns in size #0 and #1 respectively.

1/2" shank•Sold in pairs•

SED 580870-1 Round horn, 2"SED 580871-1 Round horn, 2-1/4"SED 580880-1 Regular socketSED 580890-1 Angle plate socket

580890580870/71

580880

Attwood Zinc Plated Clamp On OarlockZinc-plated steel resists rust. Oarlock fastens securely to oar with one adjustable bolt, no drilling required.

1/2" shank•Sold in pairs•

ATT 9146-3 2"

Kobelt Bronze OarlockThe popular closed ring round horn provides convenience of access and prevents loss overboard. Bronze makes unit very strong.

Opening: 2-1/4"•Shaft length: 2"•Shaft dia: 1/2"•

KOB OARLOCK Each

WATER

SPOR

TS

936 Oarlocks / Boat Mirrors

CIPA Suction Cup Ski Mirror4” x 8” fully adjustable mirror•Attaches to any clean, nonporous surface•Dash, console or windshield mount•No holes to drill, no tools required,•no scratching

CIP 11050 Black

CIPA Concept II Convex Mirror4” x 8” convex universal mirror•Mounts above or below the windshield •frameOffers permanent or temporary mounting•Fully adjustable•

CIP 11070 Black

CIPA Competition II Convex Mirror4” x 11” convex universal mirror•Mounts above or below the windshield •frameOffers permanent or temporary mounting•Fully adjustable for maximum rear view safety•

CIP 11080 Black

CIPA Economy Boat MirrorFully adjustable 2-1/2” x 8” mirror with •quick mount systemConvex lens gives wide rear view•Universal, mounts above or below •windshield or to dash

CIP 11119 Black

CIPA Boating Safety Mirror4-1/4” x 8” universal, mounts above or below •windshield frameFits windshields 5/8” to 1” thick•Fully adjustable with anti-scratch •quick-mount bracket feature

CIP 11140 Black

CIPA Comp Universal Mirror7” x 14” mirror•Features a ball & socket tension •adjustment knob to keep the mirror where you position itBracket will mount to both rectangular or •rounded windshield frames from 3/8” to 1-1/4”

CIP 02000 Black

Scotty Oar CollarsThe original plastic oar collar. Made of tough, exible polyethylene they are long wearing, quick to install with supplied fasteners and will not weaken the oar. Can be cut down for small shaft diameters.

Sold in pairs •SCO 101-BK BlackSCO 101-W White

Scotty OarlocksThe latest in oarlock design these are molded nylon over a stainless steel pin core for maximum strength. The low friction nylon gives smooth and quiet operation.

Sold in pairs•1/2" straight shank, 2-1/4" I.D. ring•

SCO 102-BK Black

Seadog Oarlock Socket BushingsPolypropylene oarlock socket bushings convert 5/8" oarlock to 1/2".SED 582059-1 Pair

Sea-Dog Injection Molded Nylon OarlocksUse with Sea-Dog nylon sockets •Will accommodate up to 2" dia. oar•Shaft L: 1-9/16" x Dia: 3/4" •Sold in pairs•

SED 580157-1

Sea-Dog Angled Oarlock SocketInjected molded black nylon •3-1/16" W x 2-3/8" deep •1/2" pin•

SED 580143-1 Each

Sea-Dog Injection Molded Nylon Oarlock SocketsAvailable in two styles, top or side mount. Perfect for tenders and dinghies.

Use #8 fasteners •3/4" socket, 1-11/16" deep•Sold in pairs•

SED 580150-1 Top mountSED 580152-1 Side mount

580150580152

WATER

SPOR

TS

937Boat Mirrors / Ski Pylons

Attwood Ski MirrorMounts on dash or (windshields up to 3/4"). Shatterproof 180o convex lens. Chrome Zamak construction.

7-5/16" W x 2-1/2" H•ATT 9083-7

CIPA Comp Mirror - Head Only7” x 14” mirror only•

CIP M1C Black

CIPA Extreme Boat Mirror6” x 20” multi-lens mirror with one •stationary and two adjustable lensesSocket tension adjustment knob to •keep mirror in positionBracket will mount to both rectangular or rounded windshield •frames from 3/8” to 1-1/4”

CIP 02022 Complete, blackCIP M2022UNAS Head only

Sea-Dog Transom Mount Ski Tow

Formed 316 stainless steel.SED 371633-1

Marine Hardware Vertical Mount Ski Tow304 stainless steel for maximum strength and corrosion resistance. Studs oriented vertically and come complete with stainless steel washers and nuts.

Ring dia: 2-1/2"•Stud: 3/8"•Stud length: 3-3/8"•

MHI SSRI19007V3.3

Swivl-Eze Thru-Deck Ski PylonSolid stainless steel post ski tow for I/O and jet boats. Mounts through the aft deck, fastening to the boat transom or oor with a plated steel plate. Comes with all necessary hardware. Swivelling slip over head offers quick hook up and removal and smooth performance.

43" x 1-1/4" diameter•SWI 9433-S

Swivl-Eze Deck Master Ski PylonConstructed with 1" stainless steel tubing the Deck Master features a quick disconnect hitch pin system for easy assembly and removal. The 33" to 51" telescoping brace arms allow for custom tting to most boats. SWI 96009

Parts:SWI 826 Base plateSWI 827 Pin w/ chain

Swivl-Eze Pro Ski PylonThese high quality durable ski pylons are constructed of corrosion-resistant 300 series stainless steel, polished to a mirror nish. Stainless steel quick disconnect pins allow for easy assembly and removal. 2" diameter telescoping pylon adjusts from 34" to 58". The telescoping brace arms adjust from 33" to 56" allowing for custom tting to most boats. Swivelling slip over head offers quick hook up and removal and smooth performance. SWI 923-009-ADJ

Parts:SWI SP-910 Deck clevis setSWI SP-930 Hardware package

Marine Hardware Ski Tow Rings

Manufactured of 304 S/S for maximum strength and corrosion resistance.

Part #RingSize

StudDia

StudLength

MHI SSRI-19006 2-1/2" 3/8" 2-1/2"

MHI SSRI-19011 3-1/2" 1/2" 4"

WATER

SPOR

TS

939Ski Towing

Kwik Tek Wakeboard Ropes15” handle with high strength aluminum •core, 4” nger protectors and foam oatsSecond 6" covered aluminum handle •provides extra leverageThe bridle is fully encased in exible vinyl•The low stretch 16-strand 30- lament rope has •4 sections with take-off loops (70’, 60’, 50’, 40’) for all riding stylesRope keeper is included •

KWI AHWR-1 YellowKWI AHWR-2 Red

Kwik Tek Water Ski RopesDouble handle ski rope•TPR tractor grip and 4" nger guards for a •comfortable and precise holdBright yellow and red colour scheme•75', one section•Rope keeper is included•

KWI AHSR-6

The ultimate in quality, this 16-strand rope has •8 colour-coded sections and take-up loops13” aluminum core handle has a high-•performance “Diamond” grip and full-length molded nger protectorsCandy stripe colour scheme•UV-treated, 1,600 lb tensile strength rope•A rope keeper is included •

KWI AHSR-8

A high quality 1 section 75' ski rope•12" aluminum core handle has a performance •"Tractor" grip and molded nger protectorsUV-treated 16-strand rope•A rope keeper is included •

KWI AHSR-75

75' rope has 4 sections (75’,60’,50’,40’)•12” aluminum core handle has a performance •“Tractor” grip and full-length molded nger protectorsCandy stripe colour scheme•UV-treated 16-strand 1,600 lb. tensile strength •ropeRope keeper is included•

KWI AHSR-4

5/16" x 75' 16 strand ski rope•1500 lb break strength•12" oating handle has an aluminum •core and a textured TPR4" end caps protect your ngers and help •create a comfortable split nger gripRope keeper is included•

KWI AHSR-5

A perfect rope for learning deep water ski starts•Deep V - EZ Up bridle to steady the ski and to •keep it pointing straight ahead12" oating handle has a TPR grip, •aluminum core & molded end caps & nger guards75', 16-strand rope•UV-treated and has a 1,500 lb. tensile •strengthThe EZ Up bridle is completely covered •with exible vinylRope keeper is included •

KWI AHSR-2

Kwik Tek Water Ski Ropes1 section 16-strand 75'•Strong aluminum core handle that oats•Molded end caps for safety and comfort•UV-treated and pre-stretched•Rope keeper is included•

KWI AHSR-1

17 degree, 13" radius aluminum core handle•Eye-catching “amoeba” patterned EVA •wraps the handle and provides a great grip3/8", 16 strand, UV treated mainline•3 sections for skiing, wakeboarding or •kneeboarding at 75, 60 or 45 feetFull length nger guards help create a •comfortable split nger gripThe encased crossover yoke protects the •rope from high abrasion wear areasRope keeper is included•

KWI AHSR-3

World IndustriesWakeboard Rope

SkullboLow-stretch poly-e wakeboard rope•15" aluminum core handle on a 5' bridle•Zigzag textured EVA grip•3 take-off sections for riding 75', 60', 50' or 40'•Two oversized oats ensure that the handle will oat•Rope keeper with Skullbo graphics is included•

KWI WIWR-1

WATER

SPOR

TS

940 Ski Towing

Kwik-Tek Tow DemonThe high-impact molded plastic oat / pulley system allows for easy attachment of ski ropes, wakeboard ropes and tube ropes. Connect quickly and easily to boats with the 2 large corrosion-resistant snap hooks. Floating rope versions. Recommended for recreational water skiing, wakeboarding, kneeboarding and towing 1 rider tubes.KWI AHTH-4 8' RopeKWI AHTH-5 12' RopeKWI AHTH-6 8' CableKWI AHTH-7 12' Cable

Kwik Tek Bungee Tow RopeThis 9/16” x 50 ft. tube rope has a 3/8” •diameter bungee cord inside, reducing wear and tear on tubes and ridersRope keeper is included •

KWI AHTRB-50

Kwik Tek Spectra Thermal Wakeboard RopeThis rope provides zero stretch for a crisp •instantaneous responseThe thermal-coated Spectra line is stiff and •rigid, resists kinking and twisting2,000 lb break strength•4 section mainline is 70' with three 5' •takeoffs15" wide EVA grip is attached to a 5' bridle •equipped with 2 foam oatsRope keeper is included•

KWI AHWR-4

Kwik Tek 2 Rider Tube RopeThis tube tow rope has 2 sections, giving •you the option to be either 50 or 60' behind the boatCorrosion resistant snap hook is included•The pre-stretched UV-resistant 7/16" •diameter 16-strand rope exceeds the 2,375 lb break strengthRope keeper is included•

KWI AHTR-22

Kwik Tek 4 Rider Tube Rope2 sections, with the option to be •either 50 or 60' behind the boatPre-stretched UV-resistant 5/8" •diameter 16-strand rope4,150 pound break strength•Rope keeper is included •

KWI AHTR-42

Kwik Tek Wakeboard RopeThis wakeboard rope has the small diameter look of Spectra or Dyneema, the ultra low stretch too, but at half the price. The 70 foot wakeboard rope has 3 take-offs in the mainline and a 5 foot handle bridle (5, 50, 5, 5, 5). The 15 inch wide EVA grip is eye catching and provides a great grip. A rope keeper is included for tangle-free storage. KWI AHWR-6

Kwik Tek Tow RopesTow your 1 and 2 rider in atables with •this tournament quality 3/8" 16 strand braided tow ropeRated at 2,200 pounds•6" loop spliced at each end •Rope keeper is included •

KWI AHTR-60

Heavy-duty 16 strand 9/16" x 60' polypropylene •tube tow rope is rated at 4,350 lbs tensile strengthEngineered to pull the big 3 and 4 rider tubes•6" loop spliced at each end•A rope keeper is included•

KWI AHTR-4000

Super strength 16 strand 7/8" x 60' polypropylene •tube tow ropeRated at 6000 pounds tensile strength•Engineered to pull the big 5 rider tubes•A "Killer Bee" colour scheme•Rope keeper is included•

KWI AHTR-6000

World Industries 2 Rider Tube Rope

SkullboDesigned for 1 and 2 rider towables•60 foot long•3/8" diameter, 16-strand construction•Rated at 2,375 pounds tensile strength•6” loop spliced at each end•Rope keeper with Skullbo graphics•

KWI WITR-1

Kwik Tek Wakeboard RopeThis wakeboard rope has a 15" “Squid” •patterned EVA-wrapped grip with a

oating aluminum coreThe 5/16", 16 strand, UV treated •low stretch rope has 3 sections for wakeboarding at 45, 55 or 65 feetFull length nger guards help create a •comfortable split nger gripRope keeper is included•

KWI AHWR-3

WATER

SPOR

TS

941Watersports

Kwik Tek Line WinderNo more tangled lines with this classic styled

oating line winder! It’s easy to wind and neatly stow away anchor lines, mooring lines, ski ropes and tube ropes. It is constructed of high impact polypropylene for extra long service. Colour: Red. KWI AHLW-1

Kwik Tek Kwik-ConnectConveniently attach and detach tube tow ropes to towables. There’s no need to thread 60' of rope through the tow strap each time you connect or disconnect a tow rope. The high impact Kwik-Connect has a 1" diameter hole to accept up to 6,000 lb break strength tube ropes. Recommended for 1 to 4 rider towables that are not equipped with Kwik-Connects.KWI AHKC-1

Kwik Tek Tow HarnessCreates a tow attachment point at the centre of your boat, behind your outboard or stern drive. Simply clip this 2,375 lb tensile strength tow harness onto the 2 stern eyes with the hooks provided, and attach your ski or tube rope. A 6” oat ensures that the attachment loop is oating on top, away from your propeller. 12' long to t larger boats. Colour scheme: Yellow / Red KWI AHTH-1

Same as the AHTH-1 above but is a 5,000-lb tensile strength tow harness for up to 5-rider tubes. 12' long to t larger boats. Colour scheme: Yellow / Red. Rope keeper included. KWI AHTH-2

Same as the AHTH-2 above but with the addition of a self-centering pulley for a consistent pull. 12' long to t larger boats. Colour scheme: Yellow / Red. Rope keeper included. KWI AHTH-3

World IndustriesWakeskate

The textured EVA deck provides excellent •footing even with bare feet11-ply hardwood construction and stiff •rockerRemovable ns provide excellent tracking•Dimensions: 45" x 16" •

KWI WIWS-1

Kwik TekAirhead Kneeboard

Lightweight, stable and responsive•V-shape design provides fast responses, smooth •

uid turns and big air off the wakeContoured EVA kneepad has deep knee wells and •reinforced toe areas3" wide adjustable cushioned strap•

KWI AHKB-1

World IndustriesBattle Wakeboard

Designed for youth riders of all levels •weighing up to 130 lbs124cm lightweight twin tip free-ride•The continuous rocker is fast and forgiving •with smooth popRIM molded with a PU core, breglass •reinforcement, PBT top and sublimated graphicsTwo removable breglass reinforced nylon ns provide •excellent tracking and carving

* Bindings not includedKWI WIW-1

World Industries4-Wheelin’ Kneeboard

A lightweight, stable and responsive kneeboard•Traditional V-shape design provides fast responses, •smooth uid turns and big air off the wakeContoured EVA kneepad has deep knee wells and •reinforced toe areas3” wide adjustable strap is cushioned for comfort•Graphic of Flame Boy running over Wet Willy with •a monster truck

KWI WIKB-1

Kwik TekMagma Kneeboard

Easy rail to rail transitions, consistent arc •though turns and effortless spinsA massive rocker, beveled edges and a unique •bottom shape for a smooth, uid, forgiving rideEZ UP Hook for effortless starts and easier •access to the rope handle

KWI AHKB-2

WATER

SPOR

TS

942 Watersports

World IndustriesFireworks Wakeboard / DC Youth Binding

For youth riders of all levels •weighing up to 130 lbs124cm lightweight twin tip free-ride •wakeboardContinuous rocker is fast and •forgiving with smooth popRIM molded with a PU core, breglass reinforcement, PBT top •and sublimated graphicsTwo removable breglass reinforced nylon ns provide •excellent tracking and carvingDC is a high wrap binding that provides plenty of support •Its front entry, one cinch lace-up design•A power strap provides extra lower leg support•Fits kid’s size 13 to adult’s size 8.5•

KWI WIW-1014

World IndustriesDevil Wakeboard / Binding Combo

141cm long with a 6 n dual thruster •setupRiders stay on edge, get more speed •into the wake and stomp landings without slipping outThe removable centre ns provide •trackingThe side ns are curved and angle •outwards at 11 degrees to provide extra edge hold and a loose feel in neutralContinuous rocker is fast and forgiving with smooth pop•For intermediate to expert riders, 150 lbs. and up•Mud Buddy is a front entry lace-up binding with one cinch •adjustability Fits adult's size 8 – 12 •

KWI WIW-5016

World IndustriesSmile Wakeboard / Adult Binding Combo

The oaty nature of this 143 cm •free-ride wakeboard will help riders of all levels excel at the sportDelivers smooth transitions •through turns and a consistent pop off the wakeThe rounded end pro le and •bevelled perimeter provide a forgiving and consistent release off the wakeDesigned for riders over 150 lbs and smaller riders that like a •big board rideTwo removable breglass reinforced nylon ns •provide excellent tracking

KWI WIW-43

Faction• is a front entry lace-up binding with one cinch adjustability Fits adult sizes 8 – 12•

World IndustriesSmile Wakeboard / Binding Combo

Delivers smooth transitions through •turns and a consistent pop off the wakeRounded end pro le and bevelled •perimeter provide a forgiving and consistent release off the wakeFor riders over 150 lbs. or smaller •riders wanting a big boardTwo removable breglass reinforced nylon ns •provide excellent tracking

KWI WIW-46

Mud Buddy• is a front entry lace-up binding with one cinch adjustability Fits adult size 8 – 12•

World IndustriesChecks Wakeboard

Designed for riders looking for smooth •transition through turns and a consistent pop off the wakeThe rounded end pro le and bevelled •perimeter provide a forgiving and consistent release off the wakeRiders of all levels will enjoy the oaty nature •of this 135cm free-ride wakeboardDesigned for riders up to 170 lbs•2 removable breglass reinforced nylon ns provide excellent •tracking

* Bindings not includedKWI WIW-2

World Industries Battle Wakeboard / Youth Binding Combo

For youth riders of all levels •weighing up to 130 lbs124 cm lightweight twin tip free-•ride wakeboard will help riders excel at the sportContinuous rocker is fast and •forgiving with smooth popTwo removable breglass •reinforced nylon ns provide excellent tracking and carvingHigh wrap bindings provide plenty of support•Front entry, one cinch lace-up bindings offer comfort, •convenience and performanceTop straps provide extra lower leg support for more power in •turnsChildren’s size 13 to adult's size 8.5•

KWI WIW-14

WATER

SPOR

TS

943Watersports / Towables

World IndustriesSkull Combo Ski W/ Bindings

For skiers who need a stable ride and want to advance •their skills67" rim molded water skis•Wide tails and tunnel shaped bottoms provide a •balance of performance, control, stability and smooth tracking turnsComposite construction and breglass reinforced •nylon nsDual density slide-type adjustable bindings•Fit adult's sizes 5 to 12 •

KWI WIS-1

Kwik TekAdult Combo Ski W/ Bindings

67" rim molded combo water skis are designed to •accommodate many different skill levelsWide tails and tunnel shaped bottoms provide a •balance of performance, control, stability and smooth tracking turnsComposite construction and breglass reinforced •nylon nsDual density slide-type adjustable bindings•Fit sizes adult's 5 to 12•

KWI AHS-1100

Kwik Tek Ladder RackA simple and affordable solution for storing kayaks, water skis, snow skis, wakeboards, snowboards, surfboards, garden tools, lumber and other bulky items. Hang it from a wall or ceiling with the steel hooks provided. Made of durable polypropylene webbing, the 8 pair of adjustable “rungs” are out tted with 14 plastic side release buckles. Adjust the height of the “rungs” or release buckles to accommodate larger items, such as kayaks.

Overall height: 6'•KWI LR-1

Kwik Tek Boot GooSaves time & reduces wear and tear to bindings•Dissipates as soon as you hit the water •Environmentally safe nonhazardous formula 16 oz bottle with squirt top•

KWI BG-1

World IndustriesMad Scientist Trainer SkisKids will learn how to deep water start and the basics of water skiing quickly and easily. These skis feature an extra wide pro le, parabolic side cut, tapered tail and comfortable adjustable bindings. The stabilizer bar keeps the 47” long skis steady while the student is learning to ski. Fiberglass reinforced nylon rudders increase stability and tracking.

Designed for skiers under 100 lbs•Adjustable bindings t child size 12 to adult size 5•

KWI WIST-1

World IndustriesSpike Towable

1 RiderDimensions: 54” dia

4 Deluxe handles with neoprene •knuckle guardsHeavy-duty virgin PVC bladder•Boston valve for quick in ating and •de atingDouble stitched nylon cover, reinforced internal •tow harness and a self-draining oor vent

KWI WIT-1

World IndustriesEscape

1 Adult or 2 Kids Dimensions: 57" dia

Rugged PVC bladder is completely •covered with a double-stitched nylon coverThin pro le makes it easy to climb •onto from the water4 handles with neoprene knuckle guards•

KWI WIT-2

World IndustriesGrim

2 RiderDimensions: 60" dia

Tapered, thick at the front, thin at •the back, this prevents submarining, provides a comfortable riding position and makes it easy to climb onto from the waterFour nylon-wrapped handles and neoprene knuckle guards•30-gauge PVC bladder is fully encased by a double-stitched •nylon cover with a reinforced internal tow harness

KWI WIT-3

Kwik Tek U-Ski Platform TrainerKids have fun and ski with con dence from the get-go with the U-SKI U-shaped trainer. It’s really easy for kids to get up on and very sturdy, even at idle speeds. It’s like a cross between a sled and trainer skis, made of durable bamboo. Kids love the fun graphics, the easy to grip handle and most importantly, the gentle ride. KWI AHUS-1

WATER

SPOR

TS

944 Towables

Kwik Tek AirheadSidewinder Towable

1 RiderDimensions: 63” x 50”

Connect up to 4 together like a train •on water, simply connect the Kwik-Connect up front to the integrated rope loop at the rearCockpit style towable has a large in ated oor•A great choice for young children•Comes with a boston valve•

KWI AHSW-1

Kwik Tek AirheadStrike Towable


4 nylon wrapped handles, neoprene •knuckle guardsComes with a free AQUA ZOOKA •water gunRF welded PVC bladder is fully encased by a double-stitched •nylon coverEquipped with a boston valve covered by a neoprene ap•

KWI AHST-2AZ

Kwik Tek AirheadSlide Towable

1 RiderDimensions: 56"

A triangular tube that is very stable •and planes quicklyIn ated oor provides a safe and comfortable ride•4 nylon-wrapped handles with neoprene knuckle guards•30 gauge virgin vinyl inner tube is electronically welded•Equipped with a speed valve•High-density nylon cover has a heavy-duty internal tow •harness

KWI AHSL-1

Kwik Tek AirheadRip II Towable

1 RiderDimensions: 48" x 50"

Fully covered, torsionally rigid, and •responsive to the riderPlastic ns sewn onto the side of the cover do the •carvingEquipped with a Kwik Connect Tow System & Speed •Valve4 nylon covered handles with molded EVA knuckle •guards30 gauge virgin vinyl inner tube and in ated oor•Fully covered by high density 840 denier nylon•

KWI AHRI-2

Kwik Tek AirheadBlast Towable


4 neoprene knuckle guards and tubular •webbing-covered handlesHeavy-duty virgin vinyl inner tube•Electronically welded seams•Equipped with a speed valve•

KWI AHBL-1

Kwik Tek AirheadHot Shot Towable

1 RiderDimensions: 57” dia

PVC bladder is completely covered •with double-stitched nylonThin pro le makes it easy to climb •onto from the water4 handles with neoprene knuckle guards•Equipped with a boston valve •

KWI AHHS-1

Kwik Tek AirheadRebel Kit Towable


A deck tube with 4 handles & •neoprene knuckle guardsHeavy gauge PVC bladder is fully •covered by double-stitched nylonInclude a triple reinforced tow harness, drain vents and •boarding strapsA 12 volt pump is included as well as a colour-matched 16 •strand tube tow ropeEquipped with a boston valve•

KWI AHRE-1

World IndustriesRumble Towable


D-shaped deck tube•In ated rails help riders stay in •position6 handles with neoprene knuckle •guardsKwik connect and boston valve•

KWI WIT-4

WATER

SPOR

TS

945Towables

Kwik Tek AirheadTransformer Towable


Transforms from a deck tube to a •cockpit tube in secondsIn ated oors and deluxe handles •with neoprene knuckle guardsTo transform this 2 rider towable, simply insert the 2 in atable •bladders to ll the cockpit and roll the neoprene pads into placeMix it up and ride one side cockpit, the other deck •840 denier nylon and 30 gauge vinyl•Kwik-connect and boston valve •

KWI AHTF-2

Kwik Tek AirheadTurbo Blast Towable


A double open top tube with double •stitched 840-denier nylon cover and 2 self-draining oor vents30-gauge virgin PVC bladder•Four handles with neoprene knuckle guards•Equipped with a multi-valve & Kwik-connect •

KWI AHTB-1

Kwik Tek AirheadSlash II Towable

2 Rider Dimensions: 58” x 48”

Both riders simply lean in the direction they want to turn and •pull on the opposite handle. The plastic ns sewn onto the side of the cover do the carvingEasy to re-board with the open back design•30-guage PVC bladder and is covered with double stitched •840-denier nylonKwik-connect, multi-valve•4 nylon-wrapped handles with neoprene knuckle guards•

KWI AHSL-3

Kwik Tek AirheadFusion Towable


Cockpit-style towables are great for •small childrenBoth a cockpit tube and a deck tube•The centre cockpit has a nylon covered in atable oor and •headrestSide deck areas have neoprene panels for comfort•Two in atable ns help riders stay on the tube•Kwik connect and boston valve•30 gauge PVC bladder is covered by 840 denier nylon •

KWI AHFN-1

Kwik Tek AirheadRevolution Towable


Lie down or sit up, either way, you’re going to spin•In atable topside divider n and 2 leg holding ns keep you •from getting thrown off by centrifugal forceJust thread the tow rope through the No Spin Strap and enjoy a •mild rideThe tow point, a heavy duty stainless steel swivel is held in •place with Kevlar strapping sewn to multiple layers of heavy gage tarpaulin material 840 denier nylon cover•30 gauge K80 PVC bladder•Two neoprene panels and 8 handles with neoprene knuckle •guardsBoston valve provides quick in ation and de ation•

KWI AHRE-2

Kwik Tek AirheadG-Force Towable


Defy centrifugal force with topside •stabilizer ns6 nylon-wrapped handles with neoprene knuckle guards•30-gauge virgin PVC bladder•Fully covered with an 840-denier double-stitched nylon•Heavy-duty Kwik connect for easy and secure hook-ups•Equipped with a multi-valve•

KWI AHGF-1

Kwik Tek Airhead Big Slice Towable


A low pro le towable with a topside •neoprene panel4 nylon wrapped handles & molded •EVA knuckle guards30 gauge vinyl inner tube is fully encased by an 840 denier •nylon cover with an internal tow harnessEquipped with a Kwik connect and speed valve•Tapered in back to only 6", for easy boarding•

KWI AHSL-4W

WATER

SPOR

TS

946 Towables

Kwik Tek AirheadSuper Slice Towable


Oversized topside neoprene body •panel and 6 handles with molded EVA knuckle guards30-gauge virgin PVC bladder is fully •encased by a rugged double-stitched nylon coverEquipped with a Kwik-Connect and Multi-Valve•Tapered in back to only 6", for easy boarding•

KWI AHSSL-1

Kwik Tek AirheadOutrigger Towable

3 Rider Dimensions: 89.5" x 76"

One of the liveliest towables of •all time because of the air pocket underneathTwo oversized topside neoprene •panels protect elbows and knees2 in ated ns on the perimeter help riders stay on top•Six deluxe handles with neoprene knuckle guards•Kwik connect and boston valve•

KWI AHOU-3

The bottoms are shaped like boat hulls which is the key to the •unparalleled lively and stable rideStunning NASCAR-inspired graphics•30 gauge bladders are completely encased in durable double-•stitched nylonStriped nylon wrap handles have neoprene knuckle guards•EVA “Indy Cap” covers the boston valve•

KWI AHVI-F1 1 Rider, 67" x 51"KWI AHVI-F2 2 Rider 69" x 67"KWI AHVI-F3 3 Rider, 96" x 67"

Kwik Tek Airhead Viper Towables

Two big in ated sponsons on the bottom, hold the edge and •create the steering effectHandles have thick EVA-molded knuckle guards•Two oversized neoprene pads are located to protect knees and •elbowsThe RF welded virgin vinyl PVC bladder is completely •wrapped in double-stitched 840-denier nylonIncludes a heavy-duty Kwik connect and the multi-valve•

KWI AHMX-V2 2 Rider, 80" x 64"KWI AHMX-V3 3 Rider, 97" x 74"

Kwik Tek AirheadMatrix 2 & 3 Towables

A wide wingspan and thick front pro le for gliding effortlessly •across big wakesNeoprene seat pad is provided for each rider•Nylon wrapped handles with neoprene knuckle guards•RF welded 30 gauge PVC bladder is fully covered by double-•stitched 840 denier nylonDoubles as a comfortable oating lake couch•

KWI AHST-2 Storm II, 2-rider, 86" x 75"KWI AHST-3 Storm III, 3-rider, 116" x 75"

Kwik Tek AirheadStorm Towables

Kwik Tek AirheadDouble Dog Towable


30-gauge PVC bladder is completely •covered in double-stitched 840-denier nylon2 handles with neoprene knuckle guards and seat pads•Includes a boston valve•

KWI HD-2

Kwik Tek AirheadHot Dog Towable

3 RiderDimensions: 8-1/2' x 44"

Nylon wrapped handles with •neoprene knuckle guards and neoprene seat padsThree 30 gauge vinyl air chambers are fully encased by high •density 840 denier nylonKwik connect•

KWI HD-3

WATER

SPOR

TS

947Towables / Loungers

Kwik Tek AirheadBigshot Towable


8 handles with neoprene knuckle •guards30-gauge virgin PVC bladder•Double-stitched nylon cover with a self •draining oor vent Equiped multi-valve & Kwik connect•

KWI BS-1

Kwik Tek AirheadMega-Slice Towable


The tapered pro le, thick at the •front and thin at the back, allows a more natural and comfortable rider position and prevents “submarining”It’s easy to climb onto from the water because it’s thin at the •back and has 5 boarding straps to grab onto8 handles with neoprene knuckle guards•Indy cap covers the boston valve•

KWI AHSSL-4

Kwik Tek AirheadMega Rock Star

6 RiderDimensions: 82" x 78"All the quality features as the Rock Star above but for 6 ridersThe sides accommodate 2 riders lying down or 4 riders kneeling. Add 2 more riders on the center “hump” and you’ve got a super fun 6 rider towable.

Oversized neoprene pads to protect knees and elbows•Fourteen nylon handles with neoprene knuckle guards•

KWI AHRS-6

Kwik Tek AirheadRock Star Towable


This U-shaped towable •glides across the wake & it rocksWith a slight turn of the boat, the inside wing teeters towards •the wake as the outside wing rises high above the waterIt also doubles as a rocking swim platform•Double-stitched 840 denier nylon cover and 30 gauge PVC •inner bladderKwik connect and boston valve•

KWI AHRS-3

Kwik Tek AirheadEz RiderAn Aqua Zooka water bazooka comes attached within easy reach. The oversized in atable backrest provides unparalleled comfort. Two plastic drink holders are RF-welded into the 24 gauge PVC body. Two rope anchors provide easy tie-ups. The molded plastic AQUA ZOOKA holders welded to the body are also great for holding a paddle. KWI AHEZR-1 1 Seater

Kwik Tek AirheadRollin'River Tube

Diameter: 42"Heavy gauge 2 chamber PVC tube•Designed for rivers, lakes and pools •2 RF-welded molded handles•

KWI AHRR-1

Kwik Tek AirheadOasis In atableThe insulated leak-proof nylon cooler lifts up from the in atable base and has an adjustable shoulder strap. It keeps 12 cans or bottles and ice cold for hours. The 6 drink holders in the oating base are marked with numbers to help you and your friends keep track of your drinks. A molded plastic rope connector is sewn to the durable nylon cover for tying up.KWI AHAO-1

Kwik Tek Airhead Aruba Lounge

Dimensions: 66" x 37"A comfortable pool and lake lounge with a mesh panel between pillows at each end. Your drink will be close at hand in the molded drink holder. Tether to your boat or tie 2 or more together using the side mounted rope anchors.

Vinyl construction with RF welded seams•KWI AHAL-1

Kwik Tek AirheadTube HandlerSave essential passenger space with the Tube Handler. It secures tubes and towables to your boat. Simply attach the straps around the tube or towable’s handles. Then attach to your boat with either the giant 3-1/4" suction cups or loop the stretch cords around a cleat or rail. The 2" wide adjustable straps are easy to tighten for a secure hold. KWI TB-101

WATER

SPOR

TS

948 Aqua-Zooka / Pumps

Kwik Tek Air Pump12 volt •9.6 cu.ft./min., .8 PSI•The universal valve ttings t all •popular valves12 volt plug is equipped with a •10' long power cord

KWI AHP-12H

Kwik TekHigh Pressure Pump

12 volt•2.5 PSI•410 litres per minute•Pressure release valve•Complete with 5 valve adapters•Connects via alligator clips•10' power cord•

KWI AHP-12HP

Kwik Tek HP Electric Pump120V, high performance pump•Peak pressure of 2.5 PSI•Accordion-style hose w/ locking •connect to the pump3 universal valves ttings•Carry handle•10' power cord•Draws 6.3 amps •

KWI AHP-120HP

Kwik Tek Electric Pump120 volt •300 litres/minute•Accordion-style hose locks onto the •pump and valve ttings3 universal valve ttings•Carry handle•Power cord is 10' long •

KWI AHP-120

Kwik TekRechargeable Pump

12 volt•Equipped with a 120 volt AC charger •and a 12 volt charger that plugs into cigarette lightersEquipped with 3 adapters•In ate or de ate continuously for 15 •minutes on a chargePeak air pressure is 0.64 PSI•Draws 11.3 amps •

KWI AHP-12R

Kwik Tek Tow Air PumpThis pump delivers a continuous stream of air on the up and down strokes. In ates or de ates by changing the hose connection.

4 universal ttings are included•Accordion style hose stretches 5' & interlocks •with the pumpCapacity is 68 gallons / 60 strokes•

KWI AHP-1

Kwik TekBellows Foot PumpUse your foot to in ate or de ate towables, boats and other in atables. It collapses to t under kayak decks or boat seats.

54” long hose and 3 adapters•Displacement per stroke is 0.5 Litres•Maximum air pressure of 2 PSI•

KWI AHP-F1

Kwik Tek Electric Pump120 volt•Peak pressure is nearly 3.0 PSI•Seven universal adapters are •included36" long heavy duty reinforced hose•A pressure release valve limits •pressure to 1.4 PSI to prevent over-in ationAccordion-style hose locks onto the pump•Screw-on Boston valve adapter•Carry handle and a 10 ft. long power cord•Draws 7.1 amps / 917 watts•Volume is 480 litres/minute •

KWI AHP-120S

Kwik-Tek Aqua-ZookaThis easy to operate, quick

lling water bazooka is constructed of high-impact thermoplastics. Simply dip AQUA ZOOKA into the water and pull back on the handle to siphon water up into the barrel. You’re ready to re, with a range of up to 60'. AQUA ZOOKAs are equipped with comfortable EVA handles so that you won’t lose your grip, even with wet hands in the heat of battle! The EVA handles also ensure that AQUA ZOOKA will oat on top of the water. Doubles as a bilge pump or household siphon! KWI AZ-12 12"KWI AZ-18 18"KWI AZ-24 24"KWI AZ-32 32"

Aqua-Zooka Display

KWI AZ-18D 18" Barrel, counter display, 42/pkgKWI AZ-18DISP 18" Barrel, oor standing, 48/pkgKWI AZ-18R Display re ll, 24/pkg (bulk)

WATER

SPOR

TS

949Inflatable Accessories / Rod Holders

Sea-Dog Side Mount Rod Holder

Injection molded polypropylene •Stainless steel clamps are included •Uses #8 fasteners•

SED 325141-1

AFI Rod HolderHigh quality polypropylene. Integral stand-offs. One-piece injection molded, U.V. stabilized.Lifetime warranty.

9" L x 1-3/4" ID•AFI 40030

Sea-Dog Side Mount Rod HoldersEach have molded-in stand-off on the back of the rod holder allowing direct mounting to any at surfaces. Injection molded polypropylene.

L: 11-11/16", Dia: 1-3/4"•SED 325120-1 BlackSED 325121 WhiteSED 325121-1 WhiteSED 325122-1 Grey

Suf x (-1) indicates display package.

Kwik Tek Multi-ValveThe multi-valve consists of 2 boston valves with different thread patterns on the bottom and a shrader valve. One of the boston valves will t your in atable. Use the shrader valve to in ate quickly at a gas station or marina. Or, screw off the shrader valve and in ate with a low pressure / high volume tube pump. KWI AHMV-1

Rule High Speed In ator/De ator12 volt, 25 amps•2.6 PSI, 20 CFM•10' cable length with battery clips•Pre-lubricated and sealed bearings •to ensure long lifeRobust fan drive belt for long life•Adjustable nozzles for all in atables and valve types included•Grip pad for one handed operation•

RUL ID-20

Taco Rod HangerPolished 316 stainless steel spring design securely locks rods in position and uses hidden installation screws for a clean look. Clam packed.TAC F16-2700-1

AFI White Poly 4-Rod Storage RacksLifetime guarantee. Sold in pairs.

15-1/2" L x 2-7/8" H x 3/4" D•AFI 65612

Poly rod rack mounting boards. White.AFI 65609

Kwik Tek Air Daddy AdaptorUniversal adaptor is tapered to t all valves found on in atables, including all sizes of stem valves and boston valves, halkey and lea eld valves. Includes needle valve for sports balls in ation. Both valves pack away for security and convenience.KWI AHAD-1

Kwik Tek Vinyl Repair KitKit includes a 1-ounce tube of the best commercial grade vinyl cement available and 4 – 2" round vinyl patches. KWI AHRK-1

Sea-Dog Rod Storage RacksManufactured from injection molded ABS with soft foam inserts that hold to rods securely, reducing damage from rough seas. SED 325613-1 3 rod, W: 7-13/16" x W: 2-7/8"SED 325615-1 5 rod, W: 11-3/8" x H: 2-7/16"

Kwik Tek Boston ValveThe 2 boston valves have different thread patterns. One is sure to t the thread pattern of your in atable, no matter what brand. They have square bases, which are much easier to turn than round, especially with wet hands. Bright red, so they’re easy to nd. KWI AHBV-2

WATER

SPOR

TS

950 Rod Holders

Sea-Dog Flush Mount Rod Holder

Stainless steel construction with stamped stainless steel mounting ange gasket including an attached lid and full length rubber liner.

Uses #12 fasteners•SED 325175-1 Black cap rod holder SED 325239-1 Replacement cap & gasket, White


Stainless steel top with UV resistant ABS body

Uses #12 fasteners•SED 325168-1

Sea-Dog Stainless Steel Side Mount Rod Holders

Comes complete with stainless steel clamps for mounting.Uses #8 fasteners •

SED 325150-1


Injection molded white ABS•Uses #12 fasteners•

SED 325161-1

Perko Rod HolderChrome plated zinc ange. Anodized aluminum tube with soft black lining.

Inside dia: 1-5/8" •Length under ange: 8"•Flange size: 4-1/2" x 3-1/2"•Uses #14 or 1/4" fasteners•

PER 1205-DP-CHRParts:

PER 480-DP-BLK Cap and gasket kitPER 482-DP1-BLK Liner and lip

Perko Rod HolderChrome plated bronze ange with a stainless steel tube. Hard plastic black liner with integral ip-up cap.

Inside dia: 1-5/8"•Outside dia: 2" •Length: 9"•Uses #10 fasteners•

PER 447-DP1-CHR Complete

Parts:PER 484-DP0-BLK Cap with gasket

BoatMates Rod HoldersThis high-styled organizer has a place for your llet knife, pliers, baits and a convenient shelf for extra line or scents. Stores two rods upright. The Tournament Series™ Rod Holders are an upscale alternative to teak or poly-board organizers. Fabricated from polished 304 stainless steel, with injection molded ABS inserts to protect valuable rods and tools. Stainless steel mounting hardware included. Packed in clear clamshell with mounting instructions.

11” L x 9.5” W x 3” D •BOT 2220-0 Double

The triple is a larger rod holder with all the same features as the double rod organizer.

13.5” L x 9.5” W x 3” D •BOT 2221-0 Triple

AFI Tournament Rod Storage RacksAll poly rod storage racks.

2 - Rod rack11-1/4" L x 11-15/16" H x 2-5/8" D•

AFI 65621

3 - Rod rack w/ knife and pliers holderSize: 18" L x 11-15/16" H x 2-5/8" D•

AFI 65622

AFI TournamentRod Storage RacksOne piece molded polypropylene construction, 3 rod rack designed to hold a knife, pliers and shing tackle.

12-1/2" L x 10-3/4" H x 2-1/2" D•AFI 67633 WhiteAFI 67634 Black

WATER

SPOR

TS

951Rod Holders

Sea-Dog Rail Mount Rod Holder

The rail mount rod holder is designed with a front mount adjustment screw. This allows for easy adjustment without having to disassemble the rail mount brackets as required on competing models.

Fits 7/8" & 1" rails•SED 327160-1 BlackSED 327161-1 White

Perko Clamp-On Rod HolderChrome plated zinc with polished stainless steel tube. Hard black plastic liner. Mounts on 3/4" to 1" vertical or horizontal rails.

Inside Dia: 1-5/8" •Outside Dia: 2" •Length: 9"•

PER 1215-DP-CHR

Taco Clamp-On Rod HolderAdjustable polished 316 stainless steel clamp-on rod holder ts any 7/8"-1" O.D. pipe or tube. Internal locking positions turn every 18° to adjust the angle of attack. Rod holder ID is 1-3/4". Comes clam packed.TAC F16-2600POL-1

Attwood Flush MountMounts ush to gunwale or deck. Easy-open cover conceals fasteners and elastomeric liner seals water out. Designed to work with the Attwood Pro-Series and 2-in-1 rod holders, as well as the mini-rigger.ATT 5022-7

Taco Clamp On Rod HolderA superior aluminum rod holder with a unique plastic adjustable holster clamp is lightweight and offers easy clamp-on installation. Flared, anodized aluminum is corrosion-resistant and features a welded I-Beam pin for secure rod butt seating. 7/8” & 1” tube in a satin nish. TAC F41-2600VEL-1

Tempress Rod Holder MountsFlush deck mount for use on horizontal surfaces. Twelve horizontal positions.

2" W x 4" L x 2" D•TMP 71455

Side mount. Use alone or with rail adapter kit. 2" H x 4" L•

TMP 71460

Rail adapter kit. Durable back plate converts side mount for rail mounting. Fits 7/8" and 1" O.D. rail.

2" W x 4" L•TMP 71465

Tempress Fish-On Original Rod HolderMolded of rugged non-corrosive •thermoplasticFive positions from vertical to •horizontalTwelve horizontal positions in 360• o

sliding lock ring Complete with locking side mount•

TMP 72012 Rod holder

Parts:TMP 72015 Replacement ring

Tempress Ergonomic Fish-On Rod HolderAll the same features as the original but with a new ergonomic design.

Molded of rugged non-corrosive •thermoplasticFive positions from vertical to horizontal•Twelve horizontal positions in 360• o

sliding lock ring Complete with locking side mount•

TMP 72026 SingleTMP 72027 2-Pack

TH Marine Rod Holder Drain CapWorks with all standard rod holders. Simply slip this cap onto the base of the rod holder and use 3/8" clear PVC tubing to route drainage from bottom tip.THM RHBD-1-DP

Attwood "Roberts" Rod HolderAn economical alternative to expensive rod holders. This molded plastic rod holder can accommodate either casting rods or spinning rods. The locking ring holds the rod securely in place. The positive lock allows for vertical height adjustment. Comes with No.SM-34 series side mount. Black.ATT RH-40

WATER

SPOR

TS

952 Rod Holders

Scotty "Powerlock" Rod HoldersScotty's newest value priced, fully adjustable, positive locking, open style holder. Made from bre reinforced nylon. The new powerlock offers strength, reliability, and affordability.SCO 230BK BlackSCO 230GR GreySCO 230WH WhiteSCO 230BK-QUAD Black (4/pkg)

SCO 231BK Black w/ #244 ush deck mountSCO 231BK-QUAD Black (4/pkg)

Scotty "Rodmaster II" Rod HoldersAn economical 8” tube rod holder that fully adjusts for all vertical and horizontal positions. Complete with # 241 mounting bracket for side or deck mount applications. New slot recess opening cradles mooching and spinning reels.SCO 350 w/ 241 mountSCO 351 w/ 244 mountSCO 355 Fits 3/4” and 1” Scotty downrigger booms,

bolts through the boom.

Scotty "Baitmaster" Rod HolderHolds a bait caster reel in a cushioned cradle. A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted

ange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top.Includes No. 241 combination deck or side mount. SCO 280BK

Scotty "Rodmaster" Rod Holders

An economical 8" tube rod holder that fully adjusts for all vertical and horizontal positions. Complete with No. 241 mounting bracket for side or deck mount applications.SCO 250 With side/deck mountSCO 251 With ush deck mount

251250

Scotty Boom Rod HoldersRod holder ts 3/4" and 1" Scotty downrigger booms. Bolts through the boom.SCO 255

Downrigger boom rod holder ts Scotty 1-1/4" booms. Clamps to the boom.SCO 258

Scotty "Striker" Rod HolderStainless steel supports and fasteners. Swivels laterally and tilts up and down to permit any

shing position. Holding security and rod support are provided on either side of the reel. A sliding ring on the outer support holds the rod when in the upright position and the inner support rotates with the rod to instantly remove and set simultaneously.SCO 240

Scotty Dual Rod HolderDual rod holder allows the addition of two adjustable rod holders to a Scotty downrigger. SCO 247

Scotty "Orca" Rod HoldersWith one quick motion, your shing rod is lifted straight out into the sh ghting position.

Unique side or deck mounting bracket with •lock down Tilts up and down, including upright for rod •storage when travellingLess missed strike opportunities•Swivels 360°•Locks closed for travelling •

SCO 400 With 241 mountSCO 401 With 244 mountSCO 405 With extention

405

Scotty "Sidewinder" Rod HolderSide mount. 5/16" stainless steel. Mount on port or starboard side. Inexpensive. Constructed for strength and durability. Soft grips protect rod.SCO 222

Rail Mount Adaptor

Made from polycarbonate•Stainless fasteners provided•For #222 rod holders•

SCO 238 7/8" & 1" rail

WATER

SPOR

TS

953Rod Holders / Rod Holder Mounts

Scotty Oarlock Rod Holder AdaptorAdapt your standard oarlock socket to hold your rod holder. Thumbscrew holds the adaptor on. Fits rod holders with multi point star base. Completely removable. Made from tough marine plastic. SCO 248

Scotty Threaded Deck MountAllows mounting on a at deck surface. Fits gunwales up to 2” thick. Secures with no exposed hardware using a provided nylon nut.SCO 444

Scotty Triggerlock Mounting BracketMade from polycarbonate. Easy set-up and removal of rod holder. For #222, #224 and #1015 right angle mount rod holders.SCO 237

Scotty Round Flush Mount BracketFor use with all Scotty post mount rod holders and accessories. Flush mount, 3-3/4" round.SCO 344

Scotty REEL E-Z Rod HandleOffers better rod control while ghting big game sh. Easily adapts to most rods. Can mount the rod handle to the reel by replacing the reel brace underneath. Rod handle has 3 height adjustments depending on the reel. Stainless steel fasteners included.SCO 420BLK

Scotty Fly Rod HolderInnovative compact design allows free trolling with a y rod. Fully adjustable and includes a safety strap. Includes No. 241 combination deck or side mounting bracket.SCO 265

Lock Down Deck/Side Mount

To use the new Scotty “lock-down” mount system simply choose the best direction to sh from and insert the rod holder or accessory, pushing the post straight down into the mount.SCO 241L

Scotty Standard Deck/Side MountCan be mounted on top or side of gunnel• For all Scotty post mount rod holders•Dim: 4” x 2” x 2”. •Bolting dim: 1-5/16” x 3-3/16” •

SCO 241BK BlackSCO 241GR Grey

Locking Flush Deck Mount

To use the new Scotty “lock-down” mount system, simply choose the best direction to sh from and insert the rod holder or accessory, pushing the post straight down into the mount.SCO 244L

Parts:SCO 244-CAP-BLK Replacement cap

Scotty Flush Deck MountsFor all Scotty post mount rod holders•Dim: 4” x 2” x 2”•Bolting Dim: 1-5/16” x 3-3/16”•Dimensions: 1-5/16" x 3-3/16"•

SCO 244BK BlackSCO 244GR GreySCO 244WH White

ScottyHammerhead Rod CushionMore comfortable and easier to use than most ghting belts. Universal rod butt tube allows simple rod to rod transfer.SCO 425

Scotty Glue-On Mounting PadsManufactured from exible PVC and can be bonded to PVC or Hypalon in atable boats. For all Scotty post mount rod holders and accessories.

Stainless steel fasteners included.•Size: W: 5" x H:7" •

*Ensure you purchase an adhesive that is suitable for your particular application.SCO 341BK BlackSCO 341GR Grey

Scotty Clamp MountFully portable mounting option for all Scotty rod holders, works with a No. 241 combination side / deck mount (not included). Maximum opening 2”. Made from super tough re-enforced nylon.SCO 449

WATER

SPOR

TS

954 Rod Holder Mounts / Pot Pullers / Crab Calipers

Scotty Gimbal Mount Rod Holder AdaptorAllows the use of Scotty multiple position rod holders with factory installed single position ush mounted rod holders without having to drill more holes in your boat.SCO 253

Scotty Rod Holder Height ExtenderExtends the height of a rod holder by 6-1/2". Stainless steel body. Works with mounts #241, 243, 244, 248 and 253.SCO 254

The “Mini Extender” allows you to lift your Scotty Rod Holder off the deck, allowing full movement and versatility. The “Mini Extender” works perfectly to eliminate the possibility of your rod interfering with an inconvenient rail position or other obstruction. For use with all Scotty post mount rod holders. Extends the height of a rod holder by 4-1/4".SCO 254M

Attwood Rail MountRound or square rail mounting. For use with SM-34 series side mount to adapt to rail mount. Comes complete with fasteners.ATT RM-32

Scotty Trap-Eze PullerFor pulling crab, shrimp and prawn traps. Long arm for extended reach over gunnel. Adjustable arm angle can be ordered with or without the Scotty #241 rod mount.SCO 749SCO 750 With 241 mount

Endurance Marine Pot Puller150 lb lifting capacity •Separate foot control •1.3 HP motor •32” Drum •Retrieval rate: 110 FPM•Mounts to Scotty #1023 mount•

END EPP600

Scotty Rail Mounting Adaptor7/8"or 1" rail.SCO 242BK Black

Scotty Round Rail Mount BracketsProvides versatile mounting without having to drill more holes in your boat. Perfect for boats with limited mounting surfaces. Stainless steel fasteners (included) hold these tough mounts securely in place. Works with all Scotty post mount rod holders.SCO 245 1-1/4" railsSCO 287 7/8" rails

Crab CalipersMade from durable plastic.WES CC-1 Lime greenWES CC-2 Commercial

WATER

SPOR

TS

955Downriggers

1090R Longarm

Makes an ideal “big boat” rigger with all the deluxe features.60“ long, 1-1/4” diameter telescoping stainless steel boom •(collapses to 36” for storage)

SCO 1090R

1050 Depthmaster

Protected depth counter•Smooth acting clutch brake•Spool retrieves 1 foot per turn•20" stainless steel boom•Can be side mounted using 1015 angle bracket•Comes complete with a 255 rod holder•

SCO 1050

1060 Depthking

Extendable high speed cranking arm for extra leverage•Retrieves two feet per turn•24" stainless steel boom•Can be side mounted using 1015 angle bracket•Comes complete with a 255 rod holder•

SCO 1060

Scotty Compact Manual Downriggers

Included With All Electric Downriggers:12V Downrigger plug and receptacle premium-quality

ConnectPro DC plug and receptacle

1116 Propack

Includes60" telescoping boom and autostop control•Dual rod holders •16 position swivel mount •Two power grip line releases •Weight storage hook •

SCO 1116 60" Includes 1026 Swivel

1099 Compact

24” long, 1” diameter stainless steel boom•Boom mounted 350 Rodmaster II rod holder•1 Power grip plus line release•

SCO 1099 24" Compact

Scotty Electric DownriggersStandard Features:

Strong stainless steel boom •Ultra-fast retrieval rate (see table below) •More lifting power than any downrigger made. Power for extra •heavy weights or for pulling out of snags, weeds or kelp The lowest amp draw of any downrigger made.•Full saltwater protection. All metal parts are stainless steel•Full automatic hands-free operation on retrieval•Plug and socket •250' of premium stainless steel line•

Weight 7 lb 10 lb 15 lb 20 lb

Retrieval Speed 235 ft./min 222 ft./min 203 ft./min 185 ft./min

Amperage Draw 4 amps 5 amps 8 amps 11 amps

1106 Depthmaster

Telescopes to 60" and collapses to 36"•SCO 1106 60" Includes 1026 Swivel

1101 Depthmaster

30” long, 1-1/4” diameter stainless steel boom•Boom mounted 350 Rodmaster II rod holder•1 Power grip plus line release•

SCO 1101 30" Includes 1026 Swivel

Scotty Manual DownriggersStandard Features:

A high speed two feet per turn spool coupled with the extra •leverage extension handle makes cranking a breezeSpray-protected, positive-drive depth counter•Fully adjustable rod holder•Strong stainless steel boom•Tilt-up mounting plate for 1080, 1085 & 1090R•Automatic brake with the most brake surface on the market• 200ft. of premium 150 lb. stainless steel downrigger cable•All units include a Power Grip Plus line release & a boom •mounted 350 Rodmaster II rod holder

1080 Strongarm

This downrigger has outstanding features for smalland intermediate size boats.

24” long, 1” diameter stainless steel boom•SCO 1080

1085 Strongarm

The heavy duty workhorse of the Scotty manuallineup. Excellent for the intermediate size boat.

30” long, 1-1/4” diameter stainless steel boom•SCO 1085

WATER

SPOR

TS

956 Downriggers / Mounting

Scotty #1073 LaketrollerIncludes: drag brake, hair trigger release, 100 feet of stainless steel wire. Maximum recommended cannonball weight is 5 lbs. Bracket Mount - Uses the "Striker" style bracket for at or side mounting. "Post" design allows 360o rotation.SCO 1073

Scotty #1027 Rail MountFor all Scotty downriggers, ts up to 1-1/2" round rail, or oval-shaped wooden rails.

Fits all Scotty downriggers plus No. 1026 •swivel mountIncludes stainless steel bolts to fasten •mounting bracketDim: 6-1/8" x 7-1/8" •

SCO 1027

Scotty #1025 Right Angle Side MountFor boats with narrow or uneven gunnels. Strong and durable, with quick fastening stainless steel bolts for easy set up and removal.

Fits all Scotty downriggers plus No. 1026 •swivel mount6" x 6" x 6" •Bolting dim: 4" x 2" •

SCO 1025 CompleteSCO 1037 Extra gunnel mounting plate

Scotty Downrigger Pedestal RiserMade from bre reinforced nylon and 2” stainless steel tubing for the ultimate in strength. Designed to be used for all Scotty downrigger mounts.

Plate Dim : 5-1/2” x 5-1/2”•Bolting Dim : 4-1/2” x 3-1/2”•

SCO 2606 6"SCO 2612 12"

Scotty #1026 Pedestal/Swivel MountGives full 360° rotation with 16 locking positions, quick fastening stainless steel bolts for easy set up and removal.

Fits all Scotty downriggers•5-1/2" x 5 1/2" x 3-5/8" •Bolting dim: 4-1/2" x 3-1/2" •

SCO 1026 CompleteSCO 1035 Mounting bolt 2/pkgSCO 1036 Mounting plate only: 5-1/2" x 5-1/2"

Scotty #1023 Mounting BracketFor depthpower electric downriggers and large manual downriggers (No. 1080, 1085, and 1090). Allows additional mounting positions.

Bolting dim: 3-3/4" x 1-5/8"•SCO 1023 Includes fasteners

Scotty #1010 Mounting BracketExtra deck mounting bracket for “Depthking” and “Depthmaster” models.

4-3/4" x 5-5/8" •Bolting dim: 2-5/8" x 4-7/8" •

SCO 1010

Scotty #1021 Portable Clamp MountFor portable downrigger shing from aluminum boats. Double stainless steel clamps and black anodized aluminum.

Fits downriggers: 1060 and 1050 •Includes stainless steel bolts to fasten •mounting bracket5-5/8" x 4-3/4" x 3-1/8" •Clamp opening: 2" •

SCO 1021

Scotty #1015 Right Angle Side MountFor boats with narrow or uneven gunnels.

Fits downriggers 1060 and 1050 •Includes stainless steel bolts to fasten •mounting bracket.5-1/4" x 2-1/2" •Bolting Dim: 4-9/19" x 1-5/8" •

SCO 1015

Scotty #1028 Gimbal MountFits into a boat’s ush mount rod holder. Eliminates drilling holes and permanent mounting of downrigger brackets on boat. Made from welded stainless steel and modi ed nylon for the ultimate in strength and durability. For use with metal ush mount rod holders. *Recommended for transom mounting ONLY*

Fits all Scotty downriggers & 1026 swivel mount•Top: 6-1/8" x 7-1/8", Tube: 9" x 1-1/2"•

SCO 1028

WATER

SPOR

TS

957Downriggers Accessories

Scotty Downrigger Theft Deterrent SystemsProtect your Scotty downriggers with our new downrigger and mount locking systems. Made with stainless steel and brass.

Downrigger Lock

Locks main base bolt to the#1023 tilt mount on 1080-1119 models. This lock system will only work with models made from 2000 and newer.SCO 3130

Swivel Mount Lock

Locks single knob of the No. 1026 Pedestal Swivel Mount.SCO 3131

Downrigger & Swivel Mount Lock Set

Combination of the No.3130 Downrigger Lock and No.3131 Swivel Mount Lock for more protection at a packaged price.SCO 3133

SCO 1140 Line fairlead for 3/4" dia booms

SCO 1134 3/8" x 6" long mounting bolt

SCO 1024 Cover for counter

SCO 1131 Lid for electric downriggers

SCO 1146 Counter with base for manual downriggers

SCO 1145 Counter for electric downriggers

SCO 1142 Handle for manual downriggers bolt and sleeve included

SCO 1014 Replacement downrigger pulley kitSCO 1139 Downrigger pulley only

SCO 1132 Emergency crank handle

SCO 1128 Spare belt set for 2000 models & earlierSCO 1129 Spare belt for 2001 models & later

Scotty Downrigger Parts

SCO 1034 4-1/2 base connection bolt for models 1080-1116 prior to 2000

SCO 1035 Replacement bolts for #1026 mount (2/pkg)

SCO 1033 Safety brakeSCO 1034 Extra mounting bolt for 1080, 1085,1090SCO 1124 20 Amp in-line fuse holder

SCO 2125 Electric plug & socket (new style)SCO 2126 Electric socket only (new style)SCO 2127 Electric plug only (new style)SCO 2128 Right angle mount for 2125SCO 3015 Cover for electric downriggers

SCO 1125 Electrical plug and socket (old style)SCO 1126 Electrical socket only (old style)SCO 1127 Electrical plug only (old style)

Scotty Downrigger Parts

WATER

SPOR

TS

958 Downrigger Accessories

Scotty Braided Downrigger LineBraided line offers the ultimate in strength, consistency and durability. Made with low-stretch Dyneema bre. 250 lb test line.SCO 2200 200'SCO 2201 300'SCO 2202 400'SCO 2203 500'

Scotty Premium Stainless Downrigger Wire150 lb test wire SCO 999 150'SCO 1000 200'SCO 1001 300'SCO 1002 400'

Green eld Coated CannonballsBalanced with a longer n for precision tracking. Four standard sizes, thick coated in black. Re ective labels.GRN 204-B 4 lbGRN 206-B 6 lbGRN 208-B 8 lbGRN 210-B 10 lbGRN 212-B 12 lb

Scotty Downrigger Weight RetrieverGreat helper and safety precaution for the downrigger sherman. Brings weights in for rigging lines and releases without having to lean out over a gunnel.SCO 3025

Scotty Lead Cannonballs & HoldersLead Cannonballs

SCO 3-LB 3 lbSCO 5-LB 5 lbSCO 7 -LB 7 lbSCO 10-LB 10 lbSCO 15-LB 15 lb

Cannonball Holders

SCO 3022BK Holder 2 pkg - BlackSCO 3022WH Holder 2 pkg - White

Cannonball Storage HookSCO 1148 For 1-1/4" booms

Scotty Trolling Snubbers

Placed between your downrigger cable and weight these snubbers absorb shock, provide electrical insulation and help to prevent snags. Easy to grip.SCO 370 Swivel, snap & snubberSCO 371 Snap & snubber

Scotty Snapper Line ReleasesThe shing line is gripped between soft pads, with variable release tension attained by moving the line in or out of the jaws. Models 1040 and 1041 feature a leader with a nickle-silver trolling snap which clinches quickly and rmly to the downrigger cable allowing easy installation and rod "stacking". Model 1042 features a leader with a snap eye swivel for attachment to the cannonball. SCO 1040 48” mono lament leader with stacking,

self-locating cable snapSCO 1041 18” leader with stacking, self-locating snapSCO 1042 18" leader, cannonball releaseSCO 1046 “Mini” Snapper 18” leader with stacking,

self-locating snapSCO 1047 18” leader with cannonball snap

Scotty Power Grip Plus ReleasesGreater range of release tension•Easy to handle shape•Streamline design will not snag on weeds •or foul lines

SCO 1170 18" leader with cannonball snapSCO 1171 18" leader with self locating snapSCO 1172 30" leader with self locating snapSCO 1173 48" leader with self locating snapSCO 1190 6 pairs replacement pads

Scotty Mini Power Grip ReleasesCompact version of the Power Grip Plus •Great for Walleye, Trout and Kokanee•

SCO 1180 18" leader with stacking, self-locating snap SCO 1181 18" leader with self cannonball snap

Scotty S/S Trolling SnapsSCO 1155 LargeSCO 1156 Small

Scotty Release ClipSCO 1005 Each

ScottyPremium Powerbraid Downrigger LineBraided line offers the ultimate in strength, consistancy and durability. Made with low stretch Spectra bre. Use of braided downrigger line helps combat electrolysis around your shing gear. 175 lb. rated test line.SCO 2300 200FTSCO 2301 300FTSCO 2302 400FTSCO 2303 500FT

WATER

SPOR

TS

959Downrigger Accessories / Fish Finder Mounts

Davis Holdz-ItHoldz-It provides a handy way of displaying and securely mounting personal electronic devices anywhere you want them! Serves as a freestanding easel or can be mounted one of three ways: suction cup, Velcro strips, or mounting screws, all of which are included. Made of tough molded plastic.DIN 262

Swivel Eze Graph & Depth Finder MountGraph mount arm rotates, allowing easy visibility from all directions. Durable aluminum construction features an attractive black powder coating. Easily installed on any at surface. The 12" adjustable arm may be locked in side position when not in use. Mount removes quickly and easily. SWI 16002

Scotty Swivel Electronics MountsPost mount design for quick removal and in nitely adjustable rotation. Fits Lowrance, Eagle and most Garmin sounders. Includes # 241 side/deck mount and stainless steel fasteners.SCO 269 With #241 mount

Same as above but comes with the #244 ush deck mount.

SCO 270 With #244 mountSCO 272 Fish nder bracket only

Panther Angler's Pal MountsYour sh nder/depth sounder can be mounted anywhere in the boat and quickly positioned for easy reading. Gives you a full 360 degree hemisphere of positions. Features a universal ball locking device with a "select position" locking knob. Made out of rust-resistant stainless steel for fresh and saltwater shing. An "Allen Wrench" easily removes your sh nder/depth sounder for security or storage.

10" or 17" overall length •PAN AP-MT10 10"PAN AP-MT17 17"

Stainless steel thimble kit, includes 2 thimbles and 4 connector sleevesSCO 1157

Lead weight swivel hooks. 2/pkg w/ 6 connector sleevesSCO 1009

Snap terminal kit, includes 1 swivel hook (#1009), 3 sleeves, 1 stainless steel thimble and 1 soft bumperSCO 1154

Scotty Downrigger AccessoriesCable coupler attaches the snap hook to the downrigger cable quickly and easily without the use of metal crimps.SCO 1038

Coastlock w/ ball bearing swivel 225# test (2/per)SCO 1150

Coastlock w/ ball bearing swivel 200# test (1/per)SCO 1151

Large Coastlock w/ ball bearing swivel 350# test (2/per)SCO 1152

Downrigger terminal kitSCO 1153

Soft Stop Bumper (4/per)SCO 1039

1038

1150

1151

1153

1039

Connector sleevesSCO 1004 10/pkg

Double line sleevesSCO 1011 10/pkg

1004

1011

Release clip locatorSCO 1007 10/pkg

Stop beadsSCO 1008 4/pkg for standard wireSCO 2008 6/pkg for braided wire

1007

1008

Scotty Extended Hairtrigger ReleasesA fully adjustable tension release which once set remains constant. The heavy mono lament line between the wire clip and the release end allows detection of small sh and permits easier hook-ups.SCO 1020 Release clipSCO 1022 Extra pins for 1020 releaseSCO 1031 48" extended lead

WATER

SPOR

TS

960 Nets / Bait Timers / Utility Holders

TH Marine Bait Tank TimerThis is a solid state timer with adjustable off times. It requires a 3" dia. round hole or 2-1/2" square hole for mounting. Only timer on the market that can handle a high capacity pumps current draw. Fully potted to be waterproof. Rated to 10 amps.

3-1/4" x 3-1/4" x 3" D•THM AAC-1-DP

Attwood Bait Tank TimerSwitch has three positions: On/off or cycling of aerator pump to extend battery life. Solid-state cycle module switches pump to on, or to a run time of 30 seconds on/3 minutes off. Includes wiring instructions and face plate for panel mounting. For 12 VDC only. 10 amps maximum.

Overall dim: 1-1/4" long x 1-1/4" wide•Installation hole size: 1/2" dia•Depth behind panel: 3-1/4"•

ATT 14292-3

Scotty NetminderQuick release system for landing nets.SCO 210

Scotty Leash w/ CoilFor paddles, rods, nets, gaffs and a variety of other items that need to be secured while in use. Made with 2 extra strong Scotty 1009 swivel snaps combined with a super strong ex coil cord allowing for maximum unrestricted movement.SCO 130

BoatMates Stor-Away Folding Electronics CaddyThis folding Stor-Aweigh holds most hand-held electronic devices used on boats or ATV’s. Holds GPS, VHF radios, most cell phones, and FRS (family radio service) communicators. The large super suction cups stay securely fastened in the roughest conditions. Screws included for permanent mounting.

4" x 4" x 1.25•BOT 2162-1 White

BoatMates GPS-Cell CaddyHolds most hand held GPS, cell phones and other small electronic devices. Suction cups or permanent mount.

6" x 4.5" x 3.5"•BOT 2134-1 WhiteBOT 2134-8 Graphite

BoatMates Communications CaddyHolds most hand-held VHF radios and FRS's.

4.5" x 3.5" x 2.5"•BOT 2135-1 WhiteBOT 2135-8 Graphite

Beckson Radio HoldersSoft PVC holder is designed for hand held VHF radios. Ideal for use in cockpits, cabins and bridges.

6" H x 3" W x 2" D•BEC HH-8 WhiteBEC HH-8B Black

BoatMates Helm OrganizerThis space saving Stor-Aweigh combines a folding GPS/ VHF/cell phone caddy with a folding drink holder and includes a handy rack for sunglasses, keys, and

shing gear. Includes a convenient, visible label for emergency numbers and registration data. Includes 3 large Super Suction cups, plus stainless steel screws for mounting.

4" x 11" x 1.25"•BOT 2137-1 White

BoatMates Cockpit OrganizerHolds shing gear, binoculars, personal items such as bait, tools, knives, etc.

12" x 6" x 4"•Two suction cup mounting•

BOT 2133-1 WhiteBOT 2133-8 Graphite

BoatMates Cruisin' CaddyOrganizer that holds your beverage, personal items, lures, etc. Mounts vertically or on at surfaces. Great for small boats with limited cockpit storage.

12" x 4.5" x 3.5"•Two suction cup mounting•

BOT 2131-1 White

Scotty Landing Net30" solid hoop, 6 foot handle. Scotty landing nets are the best you can buy. Aluminum alloy handle and hoop with tough corrosion resistant nish. Strong 1-1/4" diameter handle, retracts for compact storage.SCO 207

WATER

SPOR

TS

961Utility Holders

BoatMates S/S Cockpit OrganizerKeep all those small personal items convenient and safe with the Tournament series cockpit organizer, fabricated from polished 304 grade stainless steel. This upscale organizer is great for

shing gear, binoculars and other personal items. Stainless mounting hardware included.

12.5” L x 4.5” W x 4.5” D•BOT 2213-0

BoatMates S/S Knife & Pliers CaddyThe Tournament Series™ Knife and Pliers Caddy keeps these essential tools safe and convenient in the cockpit or cabin. Fabricated from 304 polished stainless with injection molded ABS inserts to keep tools protected. Stainless steel hardware included.

9” L x 4” W x 3” D•BOT 2212-0

BoatMates Folding S/S Hook Rack304 Stainless steel folding hook rack holds up to 17 large bait hooks. Spring loaded folding mechanism. Silicon inserts won't damage hooks. 16" x 2-3/4"BOT 2215-0

AFI Knife & Pliers HolderOne-piece molded corrosion proof UV stabilized material holds two knives, a pair of pliers and up to 15 pieces of shing tackle. Includes stainless mounting screws.

4" W x 9" H x 2-1/4" D•AFI 67607

AFI White Poly Exterior Binocular Rack

Outside: 8-1/2" W x 5-1/8" H x 3-5/8" D•Inside: 8" W x 4-3/4" H x 3-1/8" D•

AFI 65702

AFI White Poly Knife & Pliers HolderHolds two knives and pliers.

6-1/2" W x 7-1/2" H x 2-1/2" D•AFI 65608

BoatMates Spare Suction CupsReplacement cups •Package of 4•

BOT 2200-0

BoatMates Hook Rack3 Suction cups. 12" x 1.5"BOT 2110-1

Heavy mesh pocket organizer can be mounted on a back-to-back seat base or on the rear of

ip- op style seat. Made of commercial grade coated mesh and polyester materials. Snap fasteners for back-to-back seats and quick release straps for ip- ops.BOT 3129-4 29" L x 9.5" W x 3" D

BoatMates Seat Organizer

Holds all mandatory safety gear, personal items and handheld electronics.This bag secures over the bench seat by a hook and loop strap fastener strip. Large main storage, two zippered mesh storage pockets in the front plus a covered pocket in the centre. Constructed of 600 denier polyester with UV resistant PVC lining. Top is a thick cushioned seat measuring 35" wide x 10" deep.BOT 3128-8 35" L x 10" W x 9" D

BoatMates Underseat Gear Bag

AFI White Poly Drink/Binocular Rack

2-4 Drink & Binocular Rack14-1/2" W x 3-7/8" W x 2-3/4" H x 2-3/4" hole•

AFI 65632

WATER

SPOR

TS

962 Utility Holders

BoatMates Utility PouchMade from marine grade fabric. Store your hand held radio, G.P.S., cell phone, winch handle, etc.

Two suction cup mounting•BOT 3100-4 7" x 11" x 1-1/2"BOT 3105-4 10" x 11" x 2"

Davis Sticky Bags & PocketsUse them to organize all the small accessories that accompany leisure outings. They feature suction cups to stick anywhere without time consuming installation. Great for boats, RVs, PWCs, cars, trucks and home use.DIN 267 Pocket - 10" x 13"DIN 268 Bag - 12" x 12"DIN 269 Bag - 18" x 12"

BoatMates Trash BaggerThe perfect solution for keeping the cockpit or cabin ship shape, and trash out of the water. Easy to mount resin frame has a hinged cover to keep the contents from spilling out, and insects from creeping in. Quickly mounts on any smooth surface with three super suction cups, or can be permanently mounted with screws. Uses the typical supermarket “tee-shirt” bags, or kitchen trash bags. Use one for trash, and another for recyclables. Mounting instructions and bags included. BOT 2132-1 White

BoatMates Shower ToteOrganize your shower essentials on the boat, and then take them to the bath house when needed. Mesh bag lets you see the contents inside, drains water, and dries out in minutes. Large carry handles make transporting easy. Three super suction cups can be mounted on smooth surface shower walls. Zipper top keeps contents from spilling out. BOT 3107-4 Blue

BoatMates Cabin Door OrganizerThis large, 14” x 24” pocket organizer, can hold full-size NOAA chart books, radio, GPS, personal items, and all the other miscellaneous items. Six extra large Super Suction cups keep the Cabin Door Organizer securely in place on any smooth surface. Five pockets, and straps keep all kinds of gear neat, organized, and easily accessible.BOT 3110-9 Black

BoatMates Mesh Utility BagLarge, 14” x 20” mesh bag can be used as a laundry bag, line organizer, or for ventilated clothing storage. Super Suction™ cups mount on any smooth surface, or permanently mount with screws. Full width top ap, with hook and loop closure, keeps contents in place. BOT 3108-4 Blue

BoatMates Laundry Bag HookLarge, 24” x 28” mesh bag holds a weekends worth of dirty laundry. Drawstring top keeps everything inside. Includes a utility hook for hanging. Use the large Super Suction cup, provided, or mount with screws.BOT 3109-4 Black

Davis Instruments Knot 'A' BagPortable plastic bag dispenser holds 32.5’ (10 m) of tightly wound polyethylene lm, yet ts in the palm of your hand. Waterproof when tied, just pull it, cut it, knot it, bag it! Dispenser clips to belt, backpack or dog leash.

Suitable for food storage •Bag circumference 24”•Dispenser is 4” high •Includes two rolls of polyethylene lm•

DIN 480 Dispenser w/ re llDIN 485 Re ll (3 pack)

Davis Deck HandThe DeckHand is a convenient carrying caddy that attaches to rails, lifeline, or almost any horizontal bar. Simple to install, removable and adjustable. Made of strong, marine-tough polyportex; won't scratch surfaces; sun and mildew resistant. Securely holds drinks, suntan lotion, sunglasses, keys, I.D., portable phone, pliers, tools, etc.

4-3/4" W x 15-3/4" L x 1/4" Thick (empty)•DIN 265

WATER

SPOR

TS

963Drink Holders

Sea-Dog Adjustable Folding Drink Holder

Injection molded ABS•Adjusts from 2-3/8" to 3-7/8"•

SED 588220-1 Black SED 588221-1 White SED 588222-1 Grey

Sea-Dog Swivel Beverage HolderChrome plated brass beverage holder with foam insulator. Fits most mugs with handles, cans and glasses.SED 588130-3

BoatMates S/S Folding Beverage HolderThe Tournament Series folding drink holder is fabricated from 304 polished stainless steel. The space saving folding design is also equipped with molded silicone ngers to adjust to the varying diameters of cans, cups, cozies and mugs. It also has a molded silicone “coaster” on the inside of the cover to reduce noise and to keep containers from sliding. Stainless steel mounting hardware is included, along with nylon sound dampening washers for positioning between the unit and the hull.

4.5” L x 5” W x 1” D (folded)•BOT 2211-0

S & J Drink-A-Long Drink HoldersS&J 960025 Chrome platedS&J 960026 Stainless steelS&J 960019 Replacement button

S & J Sail-A-Long Drink HolderThe original lifeline drink holder that hangs on the lifeline. Made from heavy gauge electropolished stainless steel.S&J 960024

Sea-Dog Folding Drink Holder

Injection molded ABS•SED 588210-1 Black

JR Products Adjustable Drink HolderEasy mounting, adjustable arms, holds up to 32 oz cup or beverage. Folds out of the way when not in use. Perfect for RV's, boats and cars. JRP 45619 Black JRP 45622 Grey JRP 45623 Tan JRP 45624 White

Sea-Dog Adjustable Folding Beverage Holder

304 Stamped stainless steel construction.Adjusts from 2-3/8" to 3-7/8"•

SED 588250-1

BoatMates Folding Drink HolderTraditional holders keep drinks handy, but can’t accommodate the cozy. The new Folding Drink Holder features double-ring collar assembly capable of holding both cans and cans with cozies. Drinks can stay within reach and stay cold, too. With a new all-resin design, the drink holder won’t rust or corrode. Its injection molded, commercial grade resin provides superior durability and an attractive appearance. Few moving parts results in a longer, more reliable product life. The holder can be mounted with Tempress’ Super-Suction cups or screw mounted.BOT 2170-2 2/pkg

BoatMates Drink Holder PlusSingle drink holder •Suction cup fastening•6" x 4" x 4"•

BOT 2136-1 White

*Sleeve not included

WATER

SPOR

TS

964 Drink Holders

BoatMates Drink Holder w/ SleeveHolds a single drink with insulation sleeve.

3.6" x 3.5" dia•BOT 2150-1 White

Scotty Drink HoldersFor cans, coffee mugs and insulated sleeves. Convenient accessory rack to hang lures and tools. Easily removable. Complete with bulkhead / gunnel mount and rod holder post mount.SCO 311-BK BlackSCO 311-WH White

ITC Stainless Drink Holder316 stainless steel drink holders are simple & stylish. Each has a highly polished visible rim and is stepped for multiple sized drinks with a 3/8” weep hole and noise reducing rubber pad. The turned lip is exposed above the mounting surface.

Requires a 3.5” cutout and is 3” deep•ITC 81421SS-HP-D

L'il Sucker Insulated Drink HoldersSimply slide the New L'il Sucker™ over the bottom of any object and place it on any smooth surface... Releases with the touch of a nger! Works on Aluminum, Vinyl, Ceramic, Plexiglas etc... comes with a plastic insert that will hold hot or cold liquids as well as bottles and cans.LIS LS-03 Sleeve w/ plastic insert

Accessories:LIS LS-LID Lid only

Injection molded ABS plastic. Dual purpose design allows use of pop cans with or without insulated can wraps.

Part # A B C Hole Colour

SED 588060 4" 3-5/8" 3-1/4" 3-3/4" Black

SED 588061 4" 3-5/8" 3-1/4" 3-3/4" White

Sea-Dog Flush Mount Drink Holders

Beckson Can/Horn Holders

Soft PVC holder is designed for pop cans and air horns. Ideal for use in cockpits, cabins and bridges.BEC HH-6 WhiteBEC HH-61 White, for cans with insulator sleeve

Sea-Dog Flush Mount Drink Holders

Injection molded ABS plastic. Fits standard pop tin.Part # A B C Hole Colour

SED 588000 3-3/8" 2-7/8" 2" 3" Black

SED 588001 3-3/8" 2-7/8" 2" 3" White

SED 588010 3-3/8" 2-7/8" 3" 3" Black

SED 588011 3-3/8" 2-7/8" 3" 3" White

SED 588050 4-1/8" 3-5/8" 2-5/16" 3-3/4" Black

Marine Hardware Drink HolderStamped stainless steel drink holders are electropolished for added corrosion resistance. Two step design holds standard 12 ounce beverage cans with or without insulators.

Diameter: 4”, Depth: 3”•MHI SSDC70000

L'il Sucker Drink Holders

Simply slide the Original L’il Sucker over the bottom of any object and place it on any smooth surface, releases with the touch of a nger. Works on aluminum, vinyl, ceramic and Plexiglas. Use the full sleeved insulated for temperature control of hot or cold beverages.LIS LS-01 Original (base only)LIS LS-02 Insulated (sleeved)

LS-01

LS-02

WATER

SPOR

TS

965Key Floats / Sea Sickness / Solar Shower

Scotty Bottle LockFeatures a unique gure "8" attachment combined with super strong locking swivel hook. Can be easily installed on most bottles and is reusable.SCO 150

Wichard Key RingWichard stainless steel snap hook key ring. The chain and ring are chrome plated steel.WIC 9305

Davis Instruments Key BuoyThe ultimate key oat for boaters! When keys fall in the water, Key Buoy self-in ating key ring opens up, releasing an air tube which in ates automatically. Within 30 seconds, your keys rise to the surface, and the 14” (47 cm) in ated tube extends above the water, allowing you to reach over and pick them up. Strong enough for items weighing up to 4.2 ounces (120 grams) such as keys, small tools, deck plate keys. Suitable for single use only, so keep a spare on hand.DIN 530

Hardline Products (Dyer) Key Floats

End key loss with a Dyer uorescent yellow key oat. Sold individually or in a 24 key oat display*.DYE AN-12P Anchor graphicDYE LL-12P Bass graphicDYE L-12P Ski girl graphicDYE YKF-SB Sailboat graphic

DYE X-24 Display that comes with 12 Bass and 12 Ski Girl key oats

DYE CS-01 2 Display strips with 2 each of popular sayings* in red, white and blue. (24 total)

*Boat Keys*Get in Sit Down Shut Up Hold On*H2O Skier*The One with the Most Toys Wins*The Difference Between Men and Boys is the Price of Their Toys*The Worst Day Fishing Beats the Best Day Working

Camco Polycarbonate Glass SetsNo more broken glassware! Revolutionary polycarbonate glasses have the look and feel of real glass, and the advantage of being unbreakable.

Sold in boxed pairs•Dishwasher safe•

CAM 43861 Wine glass (2/Set)CAM 43871 7-oz tumbler (2/Set)CAM 43891 Beer glass (2/Set)CAM 43901 Martini glass (2/Set)

L'il Suckers Snap Caps

Snap-on, pop-off drink protection that is reusable & dishwasher safe. Fewer spills and no more at drinks. Fits most drink cans.LIS SNAP CAP Assorted colours, display 24/pkg

Sea-Dog Insulated TumblerInjection molded 5" x 3-1/2" polycarbonate tumbler holds up to 16oz.SED 588300-3

Davis Queaz-Away Sea-Band WristbandSea-Band is a non-drug aid for the traveller which ends the unpleasant effects of rough seas, bumpy air ights, or winding roads. Sea-Band operates by exerting gentle pressure on the acupressure point on the underside of each wrist. Sea-Band may be worn repeatedly or continuously and can be washed with soap or mild detergent. Fits all adults and children.DIN 400

Sea-Dog Solar ShowersA black PVC bag heats water using the sun's rays. Hose and shower head included.SED 582100-1 2-1/2 gallon capacitySED 582200-1 5 gallon capacity

WATER

SPOR

TS

966 Miscellaneous / Dog Toys

Sea-Dog Waterproof Playing CardsDesigned especially for marine use. These 100% plastic playing cards are totally waterproof and very durable. Perfect for use on board or on the beach. Face cards have nautical scenes.SED 588811-1

Paws Aboard Dog LeashMade of the sturdiest cord for long-term durability. The authentic ski rope handle provides great control of big or strong dogs. The leash has 4.5 feet of rope and a heavy-duty steel clip for clasping onto your dog’s collar. PAW 3000

Sea-Dog Nylon Gear HammockLength: 60"Colour: WhiteSED 671100-1

Davis WindscoopThe "Windscoop" ventilating sail puts an end to hot, stuffy cabins and sleepless nights by forcing even the slightest breeze down into your cabin to keep you cool and comfortable. All seams are double stitched. Fits any hatch or companionway up to 4 feet wide. Can be hung from a halyard or roller furling sheet. Includes protective nylon storage bag.DIN 291

Dock Edge Boaters Clothes PinsMade from high impact plastic these handy clothes pins are made to last. Each pin is a single molded piece with no conventional spring or hinge area. The “memory” of the material provides an easy-to-use sure grip on bow or handrails for wet towels, bathing suits etc. DOC 96-195-F 4/pkg

Sea-Dog Bean Bag Style AshtrayBean bag style wind proof ashtrays with bowl and cover made from polished 304 stainless steel.

4-1/8" dia•SED 589610-1 RedSED 589611-1 Blue

The Paws Aboard brand line of high-quality, oatable fetch toys are designed to keep your pooch

paddling' back for more! Each of our toys is designed so that your dog can close his mouth as he swims to avoid choking. We use top notch durable materials such as marine grade rope and heavy duty nylon to withstand the elements. *Not intended as a chew toy. PAW 2200 Monkey st rope toyPAW 2300 Training dummy toyPAW 2400 Lifering toy

Paws Aboard Doggy Toys

Super-durable synthetic rubber •These oaters are ready for all terrain use•Chew level: Medium•

PAW 33020F 4.5" Bone w/ treat stationPAW 33028F 6" FlyerPAW 33038F 7" Retriever toss, 16 plait nylon handlePAW 33040F 11" Retriever toss, 16 plait nylon handle

Paws Aboard Dogsavers Chew Toys

Kwik Tek 'Wrap It Up'You’ll nd 100’s of uses for these 12” long hook and loop wraps. Use them at home, in the garage, on the job, camping, boating, shing, just about anywhere. The hook and loop fasteners are sewn to durable 12” x 1” webbing and reinforced with a bar tack at each end. KWI WR-123 3 per blister pack, assorted coloursKWI WR-12100 100 pc display, assorted colours

watersports & fishing 931 - aqua services · 2020. 1. 20. · fishing accessories rod holders...

Documents