weatherford t series pumps
DESCRIPTION
The Weatherford T-series pumps are single-acting triplex plunger pumps rated from 5 hp to 40 hp in continuous-duty service and from 8 hp to 66 hp in intermittent duty. http://www.tencarva.com/weatherfordTRANSCRIPT
Pump and Fluid Systems
1 © 2014 Weatherford. All rights reserved. TIS0111.00weatherford.com/pumps
Pump Specifications
Rated (HP, kW) 5 3.7
Stroke length (in., mm) 1.38 35.1
Maximum discharge pressure (PSI, Bar)
T5H 4,730 326
T5M 2,410 166
T5L 980 67
Rated rod load (lb, kg) 1,450 658
Intermittent duty speed, RPM 475
Maximum continuous duty speed, RPM 350
Minimum speed, RPM 90
Crankshaft dimensions (in., mm)
Diameter 1.125 28.6
Length (both sides) 2.250 57.2
Keyway, width × depth (in., mm) .250 × .125 6.4 × 3.2
Oil capacity (gal, l) 0.63 2.9
Weight (lb, kg); estimates only 210 95.3
Mechanical efficiency 90%
Flange Connections
Pump Model
Discharge Connection Sizes (in., mm)
Suction Connection Sizes (in., mm)
T5H 1.0 (25.4) NPT 1.5 (38.1) NPT
T5M 1.0 (25.4) NPT 1.5 (38.1) NPT
T5L 1.0 (25.4) NPT 1.5 (38.1) NPT
Standard Equipment• Forged duplex stainless steel, or forged carbon steel
fluid ends
• Duplex stainless steel stuffing boxes
• Disc valve
• Tungsten carbide coated plungers over stainless steel base or solid ceramic plungers
• Double extended crankshaft
• Multiple plunger packing arrangements offered
Optional Accessories• Packing lubricators
• Customized plunger packing arrangements
• Complete pump packages
Technical [email protected] 1-281-252-7867
T5 Triplex Pump
Pump and Fluid Systems
Weatherford products and services are subject to the Company’s standard terms and conditions, available on request or at weatherford.com. For more information contact an authorized Weatherford representative. Unless noted otherwise, trademarks and service marks herein are the property of Weatherford and may be registered in the United States and/or other countries. Weatherford products named herein may be protected by one or more U.S. and/or foreign patents. Specifications are subject to change without notice. Weatherford sells its products and services in accordance with the terms and conditions set forth in the applicable contract between Weatherford and the client.
2 © 2014 Weatherford. All rights reserved. TIS0111.00weatherford.com/pumps
T5 Triplex Pump
Performance Ratings
Model (standard)
Plunger Diameter
(in.)
Gallons Per Revolution
Maximum Pressure
PSI
90 RPM 150 RPM 200 RPM 250 RPM 350 RPM Intermittent Duty 475 RPM
GPM BPD GPM BPD GPM BPD GPM BPD GPM BPD GPM BPD
T5H0.625 0.0055 4,730 0.5 17 0.8 28 1.1 38 1.4 47 1.9 66 2.6 890.688 0.0066 3,910 0.6 20 1.0 34 1.3 46 1.7 57 2.3 80 3.2 1080.750 0.0079 3,280 0.7 24 1.2 41 1.6 54 2.0 68 2.8 95 3.8 129
T5M
0.875 0.0108 2,410 1.0 33 1.6 55 2.2 74 2.7 92 3.8 129 5.1 1751.000 0.0141 1,850 1.3 43 2.1 72 2.8 96 3.5 120 4.9 169 6.7 2291.125 0.0178 1,460 1.6 55 2.7 91 3.6 122 4.4 152 6.2 213 8.4 2901.250 0.0220 1,180 2.0 68 3.3 113 4.4 151 5.5 188 7.7 264 10.4 358
T5L 1.375 0.0266 980 2.4 82 4.0 137 5.3 182 6.6 228 9.3 319 12.6 4331.500 0.0316 820 2.8 98 4.7 163 6.3 217 7.9 271 11.1 379 15.0 515
Model (metric)
Plunger Diameter
(in.)
Liters Per Revolution
Maximum Pressure
BAR
90 RPM 150 RPM 200 RPM 250 RPM 350 RPM Intermittent Duty 475 RPM
LPM M3/hr LPM M3/hr LPM M3/hr LPM M3/hr LPM M3/hr LPM M3/hr
T5H0.625 0.0208 326 1.9 0.1 3.1 0.2 4.2 0.2 5.2 0.3 7.3 0.4 9.9 0.60.688 0.0251 269 2.3 0.1 3.8 0.2 5.0 0.3 6.3 0.4 8.8 0.5 11.9 0.70.750 0.0299 226 2.7 0.2 4.5 0.3 6.0 0.4 7.5 0.4 10.5 0.6 14.2 0.9
T5M
0.875 0.0407 166 3.7 0.2 6.1 0.4 8.1 0.5 10.2 0.6 14.3 0.9 19.3 1.21.000 0.0532 127 4.8 0.3 8.0 0.5 10.6 0.6 13.3 0.8 18.6 1.1 25.3 1.51.125 0.0673 101 6.1 0.4 10.1 0.6 13.5 0.8 16.8 1.0 23.6 1.4 32.0 1.91.250 0.0831 81 7.5 0.4 12.5 0.7 16.6 1.0 20.8 1.2 29.1 1.7 39.5 2.4
T5L 1.375 0.1006 67 9.1 0.5 15.1 0.9 20.1 1.2 25.1 1.5 35.2 2.1 47.8 2.91.500 0.1197 57 10.8 0.6 18.0 1.1 23.9 1.4 29.9 1.8 41.9 2.5 56.9 3.4
General Notes1. Capacities shown are based on 100 percent volumetric efficiency. Actual capacities
are lower, based on discharge pressure and fluid compressibility.2. API-674 and NACE-compliant designs are available; consult Weatherford for details
and exceptions to these standards.
3. For operation below 90 RPM, an auxiliary lubrication system is required.4. Standard plunger sizes are shown, however other sizes are available upon request.
Pump and Fluid Systems
1 © 2014 Weatherford. All rights reserved. TIS0112.00weatherford.com/pumps
Pump Specifications
Rated (HP, kW) 10 7.5
Stroke length (in., mm) 1.58 40.3
Maximum discharge pressure (PSI, Bar)
T10H 4,400 303
T10L 1,780 123
Rated rod load (lb, kg) 2,645 1,200
Intermittent duty speed, RPM 450
Maximum continuous duty speed, RPM 325
Minimum speed, RPM 90
Crankshaft dimensions (in., mm)
Diameter 1.75 44.5
Length (both sides) 3.75 95.3
Keyway, width × depth (in., mm) .375 × .1875 9.5 × 4.8
Oil capacity (gal, l) 0.95 4.3
Weight (lb, kg); estimates only 330 149.7
Mechanical efficiency 90%
Flange Connections
Pump Model
Discharge Connection Sizes (in., mm)
Suction Connection Sizes (in., mm)
T10H 1.0 (25.4) NPT 1.5 (38.1) NPT
T10L 1.0 (25.4) NPT 2.0 (50.8) NPT
Standard Equipment• Forged duplex stainless steel, or forged carbon steel
fluid ends
• Duplex stainless steel stuffing boxes
• Disc valve
• Tungsten carbide coated plungers over stainless steel base or solid ceramic plungers
• Double extended crankshaft
• Multiple plunger packing arrangements offered
Optional Accessories• Packing lubricators
• Customized plunger packing arrangements
• Complete pump packages
Technical [email protected] 1-281-252-7867
T10 Triplex Pump
Pump and Fluid Systems
Weatherford products and services are subject to the Company’s standard terms and conditions, available on request or at weatherford.com. For more information contact an authorized Weatherford representative. Unless noted otherwise, trademarks and service marks herein are the property of Weatherford and may be registered in the United States and/or other countries. Weatherford products named herein may be protected by one or more U.S. and/or foreign patents. Specifications are subject to change without notice. Weatherford sells its products and services in accordance with the terms and conditions set forth in the applicable contract between Weatherford and the client.
2 © 2014 Weatherford. All rights reserved. TIS0112.00weatherford.com/pumps
T10 Triplex Pump
Performance Ratings
Model (standard)
Plunger Diameter
(in.)
Gallons Per Revolution
Maximum Pressure
PSI
90 RPM 150 RPM 200 RPM 300 RPM 325 RPM Intermittent Duty 450 RPM
GPM BPD GPM BPD GPM BPD GPM BPD GPM BPD GPM BPD
T10H
0.875 0.0123 4,400 1.1 38 1.8 63 2.5 84 3.7 126 4.0 137 5.5 1900.938 0.0141 3,830 1.3 44 2.1 73 2.8 97 4.2 145 4.6 157 6.4 2181.000 0.0161 3,370 1.4 50 2.4 83 3.2 110 4.8 165 5.2 179 7.2 2481.125 0.0203 2,660 1.8 63 3.0 105 4.1 139 6.1 209 6.6 227 9.1 3141.250 0.0251 2,160 2.3 77 3.8 129 5.0 172 7.5 258 8.2 280 11.3 387
T10L
1.375 0.0304 1,780 2.7 94 4.6 156 6.1 208 9.1 312 9.9 338 13.7 4691.500 0.0361 1,500 3.3 112 5.4 186 7.2 248 10.8 372 11.7 403 16.3 5581.750 0.0492 1,100 4.4 152 7.4 253 9.8 337 14.8 506 16.0 548 22.1 7592.000 0.0643 840 5.8 198 9.6 330 12.9 441 19.3 661 20.9 716 28.9 991
Model (metric)
Plunger Diameter
(in.)
Liters Per Revolution
Maximum Pressure
BAR
90 RPM 150 RPM 200 RPM 300 RPM 325 RPM Intermittent Duty 450 RPM
LPM M3/hr LPM M3/hr LPM M3/hr LPM M3/hr LPM M3/hr LPM M3/hr
T10H
0.875 0.0465 303 4.2 0.3 7.0 1.4 9.3 0.6 14.0 0.8 15.1 0.9 20.9 1.30.938 0.0534 264 4.8 0.3 8.0 1.5 10.7 0.6 16.0 1.0 17.4 1.0 24.0 1.41.000 0.0608 232 5.5 0.3 9.1 1.5 12.2 0.7 18.2 1.1 19.8 1.2 27.4 1.61.125 0.0769 183 6.9 0.4 11.5 1.7 15.4 0.9 23.1 1.4 25.0 1.5 34.6 2.11.250 0.0950 149 8.5 0.5 14.2 1.9 19.0 1.1 28.5 1.7 30.9 1.9 42.7 2.6
T10L
1.375 0.1149 123 10.3 0.6 17.2 1.0 23.0 1.4 34.5 2.1 37.4 2.2 51.7 3.11.500 0.1368 103 12.3 0.7 20.5 1.2 27.4 1.6 41.0 2.5 44.5 2.7 61.6 3.71.750 0.1862 76 16.8 1.0 27.9 1.7 37.2 2.2 55.9 3.4 60.5 3.6 83.8 5.02.000 0.2432 58 21.9 1.3 36.5 2.2 48.6 2.9 73.0 4.4 79.0 4.7 109.4 6.6
General Notes1. Capacities shown are based on 100 percent volumetric efficiency. Actual capacities
are lower, based on discharge pressure and fluid compressibility.2. API-674 and NACE-compliant designs are available; consult Weatherford for details
and exceptions to these standards.
3. For operation below 90 RPM, an auxiliary lubrication system is required.4. Standard plunger sizes are shown, however other sizes are available upon request.
Model T25 Triplex Power Pump
weatherford.com 1 © 2009-2010 Weatherford. All rights reserved. 4976.02
Pump and Fluid Systems
Weatherford’s Model T25 is a single-acting triplex plunger pump rated at 23 HP in continuous-duty service and up to 34 HP in intermittent duty. This versatile pump is offered with a variety of material and design options that allow it to be used in a wide range of applications.
Applications• Amine gas sweetening
• Ammonia
• Chemical injection
• Core drilling
• Crude transfer
• Detergent and soap slurries
• Dust suppression
• Glycol gas dehydration
• High-pressure washdown
• Horizontal directional drilling
• Hot-oil truck injection
• Hydrostatic testing
• Light hydrocarbon transportation
• Machine tool coolant
• Methanol injection
• Municipal jetting
• Polymer flood
• Produced water disposal
• Pulp and paper
• Reverse osmosis
• Secondary recovery
• Steam boiler feed
• Steel mill descaling
• Water injection
1
2
3 45
6A
6B
6C
Pump and Fluid Systems
weatherford.com 2 © 2009-2010 Weatherford. All rights reserved. 4976.02
Model T25 Triplex Power Pump
Features, Advantages and Benefits1. The graphite flake microstructure of the cast iron power frame ensures robust, fatigue-free durability and excellent
wear resistance of moving surfaces.
2. All fluid cylinders are made from forged carbon steel, duplex stainless-steel, or nickel-aluminum-bronze material for increased durability and extended life. Cast materials are never used as they are susceptible to internal defects resulting from solidification shrinkage during casting.
3. Critical components—crankshafts, connecting rods, crossheads, and bearings—are comparatively larger than industry-standard components, enabling them to withstand continuous duty service and harsh operating conditions.
4. Stacked valve assemblies use O-ring seals on the seats, allowing easy accessibility for quicker service.
5. The oil trough is designed to evenly lubricate the crossheads and wrist-pin bearings during operation to reduce wear and extend component life. Pump vendors often exclude this critical feature to simplify the design and reduce the cost of the power end.
6. A variety of packing arrangements are available to meet the requirements of any applications:
a. Standard, manually adjustable packing.
b. Optional spring-loaded packing does not require manual adjustment.
c. Optional stuffing box design that minimizes fluid and vapor leakage to atmosphere for critical fluids.
Pump and Fluid Systems
weatherford.com 3 © 2009-2010 Weatherford. All rights reserved. 4976.02
Model T25 Triplex Power Pump
Specifications
Continuous Duty
Intermittent Duty
Rated power (HP) 23 34
Maximum speed (RPM) 280 420
Minimum speed (RPM) 90
Stroke length (in./mm) 2.36 60
Rated rod load (lb/kg) 3,975 1,803
Weight (lb/kg) 615 289
Oil capacity (qt/L) 8.7 8.2
Maximum fluid temperature (°F/°C) 180 82
Mechanical efficiency 90%
Plunger Ratings
Pump Model
Plunger Size
(in./mm)Displacement
(Gal/Rev)
Rated Pressure (psi/MPa)
Rated Capacity (GPM/BPD)
Minimum Continuous Intermittent
T25A
1.000 25 0.0241 5,060
34.92.2 74
6.7 231
10.1 347
1.250 32 0.0376 3,240
22.33.4 116
10.5 361
15.8 542
1.500 38 0.0542 2,250
15.54.9 167
15.2 520
22.8 781
T25B
1.750 44 0.0738 1,650
11.46.6 228
20.7 708
31.0 1,063
2.000 51 0.0964 1,270
9.08.7 297
27.0 925
40.5 1,388
2.250 57 0.1220 1,000
7.011.0 376
34.2 1,171
51.2 1,756
2.500 64 0.1506 810
5.613.6 465
42.2 1,446
63.2 2,168
2.750 70 0.1822 670
4.616.4 562
51.0 1,749
76.5 2,624
Pump and Fluid Systems
weatherford.com 4 © 2009-2010 Weatherford. All rights reserved. 4976.02
Model T25 Triplex Power Pump
Selection Graph
Intermittentoperating range
60
64
52
56
40
44
48
68
72
76
80
84
16
20
4
8
12
24
28
32
36Dis
plac
emen
t (gp
m)
00 50 100 150 250 350
Crankshaft Speed (RPM)200 300 400
FluidCylinder
PlungerDiameter(in.)
RatedPressure(psi)
B
B
B
B
A
A
A
2-1/2 810
B2-3/4 670
1,000
1,270
1,650
2,250
3,240
5,060
Below minimum RPM
Normal operating range
2-1/4
2
1-3/4
1-1/2
1-1/4
1
2.36-in. stroke, maximum rod load 3,975 lb (1,803 kg)
Pump and Fluid Systems
weatherford.com 5 © 2009-2010 Weatherford. All rights reserved. 4976.02
Model T25 Triplex Power Pump
General Dimensions
Pump Model
Flange Connections (in./mm) Dimensions (in./mm)
Discharge Connection Sizes
Suction Connection Sizes A B C D E F
T25A 1 (25.4) NPT 2 (50.8) NPT 2.95 75
3.66 93
17.80 452
23.72 602
32.05 814
11.76 299T25B 1-1/2 (38.1) NPT 3 (76.2) NPT
12.28 in.[312 mm]
5.63 in.[143 mm]
A
B
F
NPT 1-1/2 in. cradle drain
Ø2.00 in. [51 mm]
26.69 in.[678 mm] C
E
D
12.28 in.[312 mm]
5.63 in.[143 mm]
A
B
F
NPT 1-1/2 in. cradle drain
Ø2.00 in. [51 mm]
26.69 in.[678 mm] C
E
D
Pump and Fluid Systems
weatherford.com 6 © 2009-2010 Weatherford. All rights reserved. 4976.02
Weatherford products and services are subject to the Company’s standard terms and conditions, available on request or at weatherford.com. For more information contact an authorized Weatherford representative. Unless noted otherwise, trademarks and service marks herein are the property of Weatherford. Specifications are subject to change without notice. Weatherford sells its products and services in accordance with the terms and conditions set forth in the applicable contract between Weatherford and the client.
Model T25 Triplex Power Pump
Materials of ConstructionFluid Cylinder—The T25 pump is offered with 4140 carbon steel, 955 nickel-aluminum bronze, and 2205 duplex stainless-steel fluid cylinder materials, as standard, with 420, 304, and 316L stainless-steel materials available on special request.
Plungers—Weatherford provides tungsten carbide coated plungers as standard on all versions of the T25 pump. Weatherford can offer optional solid ceramic, or ceramic coated plungers on request for special applications with pumping abrasive or corrosive fluids for superior durability.
Packing—Weatherford provides all T25 pumps with braided Teflon®-Kevlar® packing as standard. This versatile packing is suitable for a wide variety of fluids and can work with or without external lubrication in most services. Optional packing styles and materials may be available as options to provide maximum performance and durability for almost any fluid and operating condition.
Trim Rings—Trim rings located inside the stuffing box may include throat bushings, lantern glands, follower rings, and adjusting nuts. Weatherford provides bronze trim rings as standard on all pumps; however, optional materials are available to meet the needs of specific fluids. All iron trim rings are offered when pumping amines or fluids that contain H2S.
Seals—The T25 pump is provided with HNBR O-ring seals as standard. This versatile material is compatible with a wide range of common industrial and oilfield fluids and has excellent temperature and abrasion resistant properties. Weatherford can offer Viton®, Aflas®, and EPDM compounds as options to meet specific fluid compatibility and operating temperature requirements.
Special Notes1. Capacities shown are based on 100% volumetric efficiency. Actual capacities will be lower based on discharge pressure and fluid
compressibility.
2. Operating power required by the pump is calculated by the formula: HP = (psi × gpm) / 1,543, where psi the actual operating pressure in psi units and gpm is the actual pumping capacity in gpm.
3. Maximum operating speeds are listed are based on pumping non-abrasive fluids with viscosities similar to water. Consult Weatherford for operating speed recommendations for viscous or abrasive liquids.
4. Dimensions shown are typical and should not be used for fabrication purposes. Optional flanged connections shown for reference. Inlet and discharge connections can be on either side of the fluid cylinder.
5. Special designs and materials available for operation above 180°F (82°C).
6. API-674 and NACE-compliant designs available on request. Consult Weatherford for specific details and exceptions to these standards.
7. Standard plunger sizes are shown; however, other sizes may be available on request. Consult Weatherford for performance and pressure ratings.
8. Consult Weatherford for assistance with pump selection on applications where actual operating inlet pressures will be greater than 5% of the rated discharge pressure of the pump model selected.
Teflon, Kevlar, Viton and Aflas are registered trademarks of their respective owners.
Pump and Fluid Systems
1 © 2014 Weatherford. All rights reserved. TIS0114.00weatherford.com/pumps
Pump Specifications
Rated (HP, kW) 40 29.8Stroke length (in., mm) 2.95 74.9Maximum discharge pressure (PSI, Bar)
T40H 4,480 309
T40M 3,110 214T40L 2,290 158
Rated rod load (lb, kg) 5,500 2,495Internal gear ratio 3.15:1Intermittent duty speed, pinion RPM 1,420Maximum continuous duty speed, pinion RPM 950Minimum speed, pinion RPM 240Crankshaft dimensions (in., mm)
Diameter 2.00 50.8Length (both sides) 4.25 108.0
Keyway, width × depth (in., mm) .500 × .250 12.7 × 6.4Oil capacity (gal, l) 5.3 24.1Weight (lb, kg); estimates only 945 428.6Mechanical efficiency 85%
Flange Connections
Pump Model
Discharge Connection Sizes (in., mm)
Suction Connection Sizes (in., mm)
T40H 1.0 (25.4) NPT 2.0 (50.8) NPT
T40M 1.0 (25.4) NPT 2.0 (50.8) NPT
T40L 1.5 (38.1) NPT 3.0 (76.2) NPT
Standard Equipment• Forged duplex stainless steel, or forged carbon steel
fluid ends
• Duplex stainless steel stuffing boxes
• Disc valve
• Tungsten carbide coated plungers over stainless steel base or solid ceramic plungers
• Double extended crankshaft
• Multiple plunger packing arrangements offered
Optional Accessories• Packing lubricators
• Customized plunger packing arrangements
• Complete pump packages
Technical [email protected] 1-281-252-7867
T40 Triplex Pump
Pump and Fluid Systems
Weatherford products and services are subject to the Company’s standard terms and conditions, available on request or at weatherford.com. For more information contact an authorized Weatherford representative. Unless noted otherwise, trademarks and service marks herein are the property of Weatherford and may be registered in the United States and/or other countries. Weatherford products named herein may be protected by one or more U.S. and/or foreign patents. Specifications are subject to change without notice. Weatherford sells its products and services in accordance with the terms and conditions set forth in the applicable contract between Weatherford and the client.
2 © 2014 Weatherford. All rights reserved. TIS0114.00weatherford.com/pumps
T40 Triplex Pump
Performance Ratings
Model (standard)
Plunger Diameter
(in.)
Gallons Per Revolution
Maximum Pressure
PSI
240 RPM 500 RPM 650 RPM 850 RPM 950 RPM Intermittent Duty 1,420 RPM
GPM BPD GPM BPD GPM BPD GPM BPD GPM BPD GPM BPD
T40H 1.000 0.0096 4,480 2.3 79 4.8 164 6.2 213 8.1 279 9.1 311 13.6 4651.250 0.0149 4,480 3.6 123 7.5 256 9.7 333 12.7 435 14.2 487 21.2 727
T40M 1.500 0.0215 3,110 5.2 177 10.8 369 14.0 479 18.3 627 20.4 701 30.5 1,047
T40L
1.750 0.0293 2,290 7.0 241 14.6 502 19.0 653 24.9 853 27.8 954 41.6 1,4262.000 0.0382 1,750 9.2 315 19.1 656 24.9 852 32.5 1,115 36.3 1,246 54.3 1,8622.250 0.0484 1,380 11.6 398 24.2 830 31.5 1,079 41.1 1,411 46.0 1,577 68.7 2,3572.500 0.0598 1,120 14.3 492 29.9 1,024 38.8 1,332 50.8 1,742 56.8 1,946 84.9 2,909
Model (metric)
Plunger Diameter
(in.)
Liters Per Revolution
Maximum Pressure
BAR
240 RPM 500 RPM 650 RPM 850 RPM 950 RPM Intermittent Duty 1,420 RPM
LPM M3/hr LPM M3/hr LPM M3/hr LPM M3/hr LPM M3/hr LPM M3/hr
T40H 1.000 0.0362 309 8.7 0.5 18.1 1.1 23.5 1.4 30.8 1.8 34.4 2.1 51.4 3.11.250 0.0565 309 13.6 0.8 28.3 1.7 36.8 2.2 48.1 2.9 53.7 3.2 80.3 4.8
T40M 1.500 0.0814 214 19.5 1.2 40.7 2.4 52.9 3.2 69.2 4.2 77.4 4.6 115.6 6.9
T40L
1.750 0.1108 158 26.6 1.6 55.4 3.3 72.0 4.3 94.2 5.7 105.3 6.3 157.4 9.42.000 0.1448 121 34.7 2.1 72.4 4.3 94.1 5.6 123.0 7.4 137.5 8.3 205.6 12.32.250 0.1832 95 44.0 2.6 91.6 5.5 119.1 7.1 155.7 9.3 174.0 10.4 260.2 15.62.500 0.2262 77 54.3 3.3 113.1 6.8 147.0 8.8 192.3 11.5 214.9 12.9 321.2 19.3
General Notes1. Capacities shown are based on 100 percent volumetric efficiency. Actual capacities
are lower, based on discharge pressure and fluid compressibility.2. API-674 and NACE-compliant designs are available; consult Weatherford for details
and exceptions to these standards.
3. For operation below 240 RPM, an auxiliary lubrication system is required.4. Standard plunger sizes are shown, however other sizes are available upon request.