Drillingpackage inventory for Sale

May 5

2011This is a drilling package including derrick, cantilever, texas deck etc, which is coming available to the market because the drilling rig is going to be converted into an accommodation rig.

Drilling Package for Sale

EQUIP MENT LIST

T AB LE OF CONTENTS

ContentsB GENERAL RIG SPECIFICATIONS .............................................................................................. 6

B.1 DERRICK AND SUBSTRUCTURE........................................................................................ 6B.1.1 Derrick/Mast ....................................................................................................................... 6B.1.2 Racking Platform ................................................................................................................ 6B.1.3 Substructure ....................................................................................................................... 7B.1.4 Weather Proofing ............................................................................................................... 7B.1.5 Derrick TV Camera System ............................................................................................... 7

B.2 DRAWWORKS AND ASSOCIATED EQUIPMENT ............................................................... 7B.2.1 Drawworks.......................................................................................................................... 7B.2.2 Auxiliary Brake ................................................................................................................... 9

B.3 DERRICK HOISTING EQUIPMENT ...................................................................................... 9B.3.1 Crown Block ....................................................................................................................... 9B.3.2 Travelling Block ................................................................................................................ 10B.3.3 Hook ................................................................................................................................. 10B.3.4 Swivel ............................................................................................................................... 10B.3.5 Drilling Line....................................................................................................................... 10B.3.6 Dead Line Anchor............................................................................................................. 10B.3.7 Block Guidance System ................................................................................................... 10

B.4 ROTATING SYSTEM ........................................................................................................... 10B.4.1 Rotating Table .................................................................................................................. 10B.4.2 Master Bushings............................................................................................................... 11B.4.3 Top Drive .......................................................................................................................... 11

C POWER SUPPLY SYSTEMS ..................................................................................................... 11C.1.1 Compressed Air Systems................................................................................................. 11C.1.2 Air Receivers .................................................................................................................... 12

D DRILLSTRING EQUIPMENT ...................................................................................................... 12D.1.1 Drill Pipe ........................................................................................................................... 12D.1.2 Hevi-Weight Drill Pipe ...................................................................................................... 13D.1.3 Drill Collars ....................................................................................................................... 13D.1.4 Inside BOP Valve ............................................................................................................. 15D.1.5 Kelly Cocks....................................................................................................................... 15

D.2 HANDLING TOOLS ............................................................................................................. 15D.2.1 Hydraulic Makeup/Breakout Machine (e.g. EZ Torque) ................................................... 15D.2.2 Iron Roughneck ................................................................................................................ 15

E WELL CONTROL........................................................................................................................ 15E.1 DIVERTER ........................................................................................................................... 15

E.1.1 Diverter Flowlines ............................................................................................................. 16E.1.2 Diverter Control Panel ...................................................................................................... 16

E.2 HIGH PRESSURE BLOWOUT PREVENTERS................................................................... 16E.2.1 Kill Line Valves ................................................................................................................. 16E.2.2 Choke Line Valves ........................................................................................................... 16

E.3 BOP CONTROL SYSTEM ................................................................................................... 16E.3.1 Accumulator Unit .............................................................................................................. 16E.3.2 Accumulator Hydraulic Pumps ......................................................................................... 17

E.3.3 Primary Control Panel ...................................................................................................... 17E.3.4 Remote Control Panels .................................................................................................... 17

E.4 CHOKE MANIFOLD ............................................................................................................. 17E.4.1 Choke Manifold (For instrumentation, see H.3) ............................................................... 18

E.5 FLEXIBLE CHOKE &KILL LINES (BOP to Manifold)........................................................... 18E.6 FLEXIBLE BOP CONTROL HOSES ................................................................................... 18E.7 BOP TESTING EQUIPMENT............................................................................................... 18

E.7.1 Hydraulic BOP Test Pump ............................................................................................... 18E.7.2 BOP Test Stump .............................................................................................................. 18

E.8 BOP HANDLING .................................................................................................................. 18E.8.1 BOP Hoist System............................................................................................................ 18E.8.2 Work Platforms................................................................................................................. 19E.8.3 Conductor Pipe Tensioning System ................................................................................. 19

F MUD SYSTEM / BULK SYSTEM................................................................................................ 19F.1 HIGH PRESSURE MUD SYSTEM ...................................................................................... 19F.2 Mud Pumps .......................................................................................................................... 19

F.2.1 Transfer Pumps / Mixing Pumps ...................................................................................... 20F.2.2 Standpipe Manifold .......................................................................................................... 20F.2.3 Rotary Hoses.................................................................................................................... 21F.2.4 Cementing Hoses ............................................................................................................. 21

F.3 LOW PRESSURE MUD SYSTEM ....................................................................................... 21F.3.1 Shale Shakers .................................................................................................................. 21F.3.2 Mud/Gas Separator (Poor Boy)........................................................................................ 22F.3.3 Degasser .......................................................................................................................... 23F.3.4 Mud Agitators ................................................................................................................... 23

F.4 BULK SYSTEM .................................................................................................................... 23F.5 Barite/Bentonite Silos ........................................................................................................... 23

F.5.1 Cement Silos .................................................................................................................... 23F.5.2 Surge Tank for Barite/Bentonite ....................................................................................... 24F.5.3 Mud Hopper...................................................................................................................... 24

G CASING / CEMENT EQUIPMENT .............................................................................................. 24G.1 CEMENTING EQUIPMENT ................................................................................................. 24

G.1.1 Cementing Manifold ..................................................................................................... 24G.1.2 Cementing Standpipe................................................................................................... 25

H INSTRUMENTATION/COMMUNICATION ................................................................................. 25H.1 DRILLING INSTRUMENTATION AT DRILLER=S POSITION ............................................ 25

H.1.1 Weight Indicator ............................................................................................................... 25H.1.2 Standpipe Pressure Gauges ............................................................................................ 25H.1.3 Choke Manifold Pressure Gauge ..................................................................................... 25H.1.4 Rotary Instrumentation ..................................................................................................... 26H.1.5 Top Drive Instrumentation ................................................................................................ 26H.1.6 Pump Stoke Counters ...................................................................................................... 26H.1.7 Tong Torque Indicator ...................................................................................................... 26H.1.8 Pit Volume Totalizer ......................................................................................................... 26H.1.9 Mud Flow Indicator ........................................................................................................... 26H.1.10 Trip Tank Indicator ....................................................................................................... 26

H.2 DRILLING PARAMETER RECORDER ............................................................................... 27H.3 INSTRUMENTATION AT CHOKE MANIFOLD ................................................................... 27

H.3.1 Standpipe Pressure Gauge (Drillpipe Pressure Gauge) .................................................. 27H.3.2 Choke Manifold Pressure Gauge (Casing Pressure Gauge) ........................................... 27

H.4 INSTRUMENTATION AT STANDPIPE ............................................................................... 27H.4.1 Standpipe Pressure Gauge .............................................................................................. 27

H.5 RIG COMMUNICATION SYSTEMS .................................................................................... 28H.5.1 Rig Telephone System ..................................................................................................... 28H.5.2 Public Address System .................................................................................................... 28H.5.3 Drill Floor Talkback System ............................................................................................. 28

H.6 EXTERNAL COMMUNICATIONS EQUIPMENT ................................................................. 28I WORKOVER TOOLS.................................................................................................................. 28J ACCOMMODATION ................................................................................................................... 28

J.1 LIVING QUARTERS ............................................................................................................ 28J.1.1 Accommodation Block...................................................................................................... 28

K SAFETY EQUIPMENT ................................................................................................................ 30K.1 GENERAL SAFETY EQUIPMENT ...................................................................................... 30K.2 SURVIVAL EQUIPMENT ..................................................................................................... 30

K.2.1 Lifeboats ........................................................................................................................... 30K.2.2 Davits ............................................................................................................................... 30

A.1.1.1 Rig Floor Winches (Non Man-riding)Quantity no. : 2Make : Ingersol RandType : K5UL Rated capacity lbs : 5,000Wire diameter inch : 1/2Automatic brakes yes/no : No Overload protection yes/no : No Automatic spooling yes/no : No Quantity no. : 1Make : Ingersol RandType : FASA Rated capacity lbs : 10,000Wire diameter inch : 3/4Automatic brakes yes/no : Yes Overload protection yes/no : No Automatic spooling yes/no : No

A.1.1.2 Monkey Board Work WinchQuantity no. : 1Make : Ingersol RandType : Airdyne Rated capacity lbs : 1 ton Wire diameter inch : 3/8Automatic brakes yes/no : YesOverload protection yes/no : NoQuantity no. : 1Make : Ingersol Rand Type : Pullstar PS 1000R Rated capacity lbs : 1 tonWire diameter inch : 3/8Automatic brakes yes/no : YesOverload protection yes/no : No

A.1.1.3 Rig Floor "Man-Riding" Winch (Utility)Quantity no. : 2Make : RAMType : ML336 CatalinaRated capacity lbs : 330Wire diameter inch : 3/8” Non-twisted wire yes/no : Yes Automatic brakes yes/no : Yes Overload protection yes/no : Yes Automatic spooling yes/no : YesCertified for man-riding yes/no : Yes

A.1.1.3.1 BOP Service Area “Man-Riding” Winch(Utility)

Quantity no. : 2Make : Ingersol Rand Type : FA 150K Gi Rated capacity lbs : 330Wire diameter inch : 3/8”

Non-twisted wire yes/no : Yes Automatic brakes yes/no : Yes Overload protection yes/no : Yes Automatic spooling yes/no : Yes Certified for man-riding yes/no : Yes

A.1.1.4 Utility Winch (ie Deck Winch)Quantity no. : 6Make : Ingersol RandType : K5UL Rated capacity lbs : 10,000Wire diameter inch : 3/4Automatic brakes yes/no : No Overload protection yes/no : No Automatic spooling yes/no : No Certified for man-riding yes/no : No Locations :

A.1.1.5 BOP Hoists (see E.10.1)Quantity no. : 2Make : BEEBEType : Overhead Bridge CraneRated capacity st : 37.5 tons / CraneLocation : Underside of drill package

B GENERAL RIG SPECIFICATIONS

B.1 DERRICK AND SUBSTRUCTURE

B.1.1 Derrick/MastMake/type : Joseph ParisRated for windspeed- With full set back knots : 100- With no set back knots : 100Height ft : 162Dimensions of base ft x ft : 36 x 36Dimension of crown ft x ft : 18 x 18Gross nominal capacity lbs : 1,485,714Static hook load lbs : 1,300,000Maximum number of lines no. : 14 (12 in use) Ladders with safety cages and rests yes/no : YesPlatform for crown sheaves access yes/no : YesCounter balance, system for rig tongspipe spinning tong yes/no : YesLighting system explosion proof yes/no : Yes

B.1.2 Racking PlatformMake/type : Total capacity-drill pipe:- 5" DP ft : 20,000- 6-5/8" DP ft : 9,000- 3-1/2" DP ft : 20,000

Total capacity-drill collars:

- 8" DC ft : 7 stands- 9" DC ft : 3 stands

Tubing Bellyboard yes/no : No

B.1.3 SubstructureMake/type : CFEM Drill floor height (above main deck) ft : 37.35Width ft : 77.34Length ft : 44.57Setback capacity kips : 606Simultaneous setback-hookload capacitykips : 1,200Rotary beam capacity (total) kips : 903Clear height below R/table beams (to main deck) ft :

B.1.4 Weather ProofingRig floor windbreaks yes/no : Yes- Height ft : Derrickman windbreaks yes/no : Yes- Height ft : Around process pits yes/no : Yes- Height ft :

B.1.5 Derrick TV Camera SystemCamera located at : Monkey board level in derrick Make/type : Ocular 12EX PTZ EExd Camera Zoom/pan/tilt-function yes/no : YesMonitor located at : Drillers house (Ocular 4M EEx de 11G T6Monitor)Camera located at : Stabbing board levelMake/type : Ocular 12EX PTZ EExd CameraZoom/pan/tilt-function yes/no : YesMonitor located at : Drillers house (Ocular 4M EEx de 11G T6Monitor)

B.2 DRAWWORKS AND ASSOCIATED EQUIPMENT

B.2.1 DrawworksMake/type : National 1625 DEMotors make/type : Jeumont Schneider DC 752- Quantity no. : 2- Rated input power hp : 1,000Motors make/type : GE DC 752- Quantity no. : 1- Rated input power hp : 1,000Drum size (dia & length) in x in : 36 x 61-1/2Drum type (grooved/smooth) : Grooved- For drill line size in : 1-1/2Brake type (disc/drum) : DrumMax line pull (12 lines) lbs : 1,250Max line pull (10 lines) lbs : 1,075Max line pull (8 lines) lbs : 880Makeup cathead type : FosterBreakout cathead type : Foster

Crown block safety device:- Make/type : National Crown-o-MaticIndependent fresh water cooling systemfor drawworks and electric brake yes/no : Yes Automatic driller yes/no : No Make/type :

B.2.2 Auxiliary BrakeMake : ElmagcoModel : 7838Independent back-up system type : KEMS

B.3 DERRICK HOISTING EQUIPMENT

B.3.1 Crown BlockMake/type : Joseph Paris (overhauled) Rated capacity st : 715No. of sheaves no. : 8Sheave diameter inch : 60Sheave grooved for line size inch : 1.5

B.3.2 Travelling BlockMake/type : National / Type H, 760H650Rated capacity st : 650No. of sheaves no. : 7Sheave diameter inch : 60Sheave grooved for line size inch : 1.5

B.3.3 HookMake/type : National / Type H-650Rated capacity st : 650Complete with spring assbly/hook yes/no : Yes locking device

B.3.4 SwivelMake/type : National / P-650 (Integrated with TDS-4S) Rated capacity st : 650Test/working pressure psi : 5,000Gooseneck and washpipe min id in : 3Left hand pin connection type : 7-5/8 RegAccess fitting for wireline entry yes/no : Yes on top of gooseneck

B.3.5 Drilling LineDiameter inch : 1-1/2Construction : 6 x 19 IPS IWRC Length (original) ft : 7,500Drilling line reel:- Drum cover yes/no : Yes- Drilling line drum power drive yes/no : No Spare drilling line yes/no : No Location (rig, shore, etc) : Rig Roller guides yes/no : Yes

B.3.6 Dead Line AnchorMake/type : National / Type EB Weight sensor yes/no : YesDead line dampener yes/no : Yes

B.3.7 Block Guidance SystemMake/type : BSI Track & Dolly/ non-retractable

B.4 ROTATING SYSTEM

B.4.1 Rotating TableMake / type : National C-495Maximum opening inch : 49-1/2Rated capacity st : 800Two speed gearbox yes/no : Yes Emergency chain drive yes/no : No Driven by an independent electric motoryes/no : Yes- Electric motor type/make : Jeumont Schneider- Maximum continuous torque ft/lbs :- Output power hp : 1,000

Drip pan/mud collection system yes/no : Yes

B.4.2 Master BushingsMake/type : VarcoInserts bowls (see G.1.8) : No. 1, 2, 3, DP/DC

B.4.3 Top DriveMake : Varco TDS-4S Type (electric/hydraulic) : ElectricRated capacity st : 650Test/working pressure psi : 5,000Output power hp : 1,100Maximum continuous torque ft/lbs : 45,500 Low Gear / 29,500 High GearTwo speed gear box yes/no : YesMaximum rotary speed rpm : 125 Low Gear / 205 High GearRemote operated kelly cock yes/no : YesCooling system type : Close Loop System (remote blower)

B.4.3.1 Top Drive Makeup/Breakout SystemMake/Type : Varco/Torque Wrench/Pipe HandlerModel : PH-85Max makeup torque ft/lbs : 85,000Max. breakup torque: ft/lbs : 85,000Raised backup system: yes/no : No- Make/type :

C POWER SUPPLY SYSTEMS

C.1.1 Compressed Air Systems

Air compressors - low pressure (bulk air):- Quantity no. : 1- Make : Ingersol-Rand- Model : 650L- Rated capacity ft3/min : 750 cfm- Working pressure psi : 40- Prime mover (electric/diesel) : Electric- Continuous power hp : 154.5

Air dryers:- Quantity no. : 1- Make/type : R800A Pioneer Refrigerated Air Dryer- Rated capacity ft3/min : 100 btu/min 100 SCFM to ambient

C.1.2 Air ReceiversQuantity no. : 1Volume (total) ft3 : 2.25 m3

Pressure psi : 125Location : Drill Floor

D DRILLSTRING EQUIPMENT

D.1.1 Drill PipeDrill pipe OD inch : 5Grade : S-135Total jnts : 137Range : Weight lbs/ft : 19.5Internally plastic coated yes/no :Tool joint OD/ID in/in : 6-5/8 - 3-1/4Tool joint pin length (original) inch : 6-3/4Tapered shoulder tool joints (box/pins)degree : 18

Connection type : 4-1/2 IF Bevel : 5-59/64 inType of hardfacing : Arnco 200XT (6000 ft) API classification : PremiumThread protectors yes/no : YesInstallation tools (manual, hydraulic, none) :

Drill pipe OD inch : 5-1/2” Grade : EU-S Total jnts : 310Range : Weight lbs/ft : Internally plastic coated yes/no : Tool joint OD/ID in/in : Tool joint pin length (original) inch : Tapered shoulder tool joints (box/pins)degree : Connection type : Bevel : Type of hardfacing : API classification :Thread protectors yes/no : YesInstallation tools (manual, hydraulic, none) :

D.1.2 Hevi-Weight Drill PipeQuantity no. : 1Nominal size OD inch : 5Weight lbs/ft : 49.5Range : 2Tool joint OD / ID inch : 6-1/2 / 3Type of hardfacing : Hughes Smooth AX@ Internally plastic coated yes/no : YesConnection type : 4-1/2 IF Thread protectors yes/no : Yes

Quantity no. : 45Nominal size OD inch : 5-1/2” SpiralWeight lbs/ft : Range : Tool joint OD / ID inch :Type of hardfacing : Hughes Smooth AX@ Internally plastic coated yes/no : YesConnection type : Thread protectors yes/no : Yes

D.1.3 Drill CollarsQuantity no. : 6OD body inch : 8-1/4ID body inch : Nominal length of each joint ft : 31Drill collar body (slick/spiral) : Spiral Recess for "zip" elevator yes/no : Yes Recess for slips yes/no : YesStress relief pin groove yes/no :

Boreback on box yes/no :Connection type : 6-5/8 REG Quantity no. : 8OD body inch : 8ID body inch : 2.813Nominal length of each joint ft : 31Drill collar body (slick/spiral) : Spiral Recess for "zip" elevator yes/no : Yes Recess for slips yes/no : Yes Stress relief pin groove yes/no : Yes Boreback on box yes/no : YesConnection type : 6-5/8 REG Quantity no. : 8OD body inch : 6.5ID body inch : 2.813Nominal length of each joint ft : 30Drill collar body (slick/spiral) : Spiral Recess for "zip" elevator yes/no : Yes Recess for slips yes/no : Yes Stress relief pin groove yes/no : Yes Boreback on box yes/no : Yes Connection type : 4 IF

Quantity no. : 12OD body inch : 6-1/2” ID body inch : Nominal length of each joint ft : 31Drill collar body (slick/spiral) : Spiral Recess for "zip" elevator yes/no : Yes Recess for slips yes/no : Yes Stress relief pin groove yes/no : Boreback on box yes/no : Connection type : Quantity no. :OD body inch : ID body inch : Nominal length of each joint ft : Drill collar body (slick/spiral) : Recess for "zip" elevator yes/no : Recess for slips yes/no : Stress relief pin groove yes/no : Boreback on box yes/no :Connection type : 6-5/8 REG Quantity no. : 8OD body inch : ID body inch : Nominal length of each joint ft :Drill collar body (slick/spiral) : SpiralRecess for "zip" elevator yes/no : Stress relief pin groove yes/no : Boreback on box yes/no : Connection type :

D.1.4 Inside BOP ValveQuantity no. : 1Make : TIW OD inch : 5Min. drill pipe ID required inch : 3-1/4Connection type : 4-1/2 IF Working pressure rating psi : 10,000

D.1.5 Kelly CocksUpper inside BOP (see also D.1.15)- Quantity no. : 1 upper- Make/type : VarcoWorking pressure psi : 15,000Max OD body in : 7-3/4Max ID body in : 3Connection type (box) : 7-5/8 Reg Connection type (box) : 7-5/8 Reg Lower inside BOP Manual- Quantity no. : 1 lower- Make/type :Working pressure psi : 15,000Max OD body in : 7-3/8Max ID body in : 3Connection type (box) : 7-5/8Connection type (pin) : 7-5/8:

D.2 HANDLING TOOLS

D.2.1 Hydraulic Makeup/Breakout Machine (e.g. EZ Torque)Make/Type : Ezy TorqueMaximum linepull : 35,000 lb

D.2.2 Iron RoughneckMake/type : Varco AR 3200Size range (max OD/min OD) in/in : 3-1/2 / 9-1/2Max makeup torque ft/lbs : 90,000Max breakout torque ft/lbs : 100,000

E WELL CONTROL

E.1 DIVERTERFixed yes/no : No- Make/type :- Maximum bore in :- ID of insert packer in :- Working pressure psi : Annular yes/no : Yes- Make/type : Hydril MSP- Maximum bore in : 29-1/2- Working pressure psi : 500Bottom connection : Flanged- Size in : 30- System pressure psi : 1,500 working

- Gasket typeNumber of diverter outlets

:no. :

R-952

Outlet OD (nominal) in : 12

E.1.1 Diverter FlowlinesQuantity no. : 1Nominal size of flowlinesRunning from diverter toValve make/type- Quantity

in :::

no. :

12Overboard (aft) Ball2

- Size in : 12- Working pressure- Valve operator (air/hydraulic) System pressure ratingFlex hose in flowline

psi ::

psi : yes/no :

500Hydraulic500No

E.1.2 Diverter Control PanelPrimary make/type- LocationRemote make/type- Location

::::

KoomeyUnder cantileverKoomey / Type 80Driller’s house and Toolpusher office

E.2 HIGH PRESSURE BLOWOUT PREVENTERSAll appropriate components H2S rated yes/no : Yes

E.2.1 Kill Line ValvesQuantity no. : 2Make/typeSizeWorking pressure Gasket type Hydraulic/manual/non-return

:in :

psi :::

Cameron3-1/1615,000BX-1541 manual & 1 hydraulic

E.2.2 Choke Line ValvesQuantity Make/type SizeWorking pressure Gasket type Hydraulic/manual

no. ::

in : psi :

::

2Cameron3-1/1615,000BX-1541 manual & 1 hydraulic

E.3

E.3.1

BOP CONTROL SYSTEM

Accumulator UnitMake/modelLocationFluid reservoir capacityOil/water mix rateGlycol reservoir capacity Total accumulator capacity (w/o precharge)

::

US gal : US gpm :

US gal :

US gal :

Koomey Type 80Inside hull502Hydraulic oil (Oceanic HW-540) None

210System working pressure psi : 3,000

Control manifold model : KoomeyRegulator type : KR Total useful accumulator volume equals allpreventer opening and closing volumesyes/no : Yes- Plus percent additional volume % : 50%

E.3.2 Accumulator Hydraulic PumpsElectric driven:- Quantity no. : 2- Make/model : Koomey- Each driven by motor of power hp : 30- Flow rate of each pump US gpm : 142- At operating pressure psi : 3,000- Operable off emergency generator yes/no : 1 - normal power, 1 - emergency generatorAir driven yes/no : Yes- Quantity no. : 2- Make/model : Koomey / U9A26- Flow rate of each pump US gpm : 6.4- AT operating pressure psi : 3,000

E.3.3 Primary Control PanelControl panel make/model : Koomey Location : Under cantilever Panel controls for the following functions:- All annular BOPs yes/no : Yes- All ram BOPs yes/no : Yes- Lock for ram BOPs yes/no : No- Diverter System yes/no : Yes- Kill and choke line valves yes/no : Yes- Low accumulator pressure warning yes/no : Yes- Low reservoir level warning yes/no : Yes- Low rig air pressure warning yes/no : Yes- System pressure regulator yes/no : Yes- Pressure regulator for annular yes/no : Yes- Flowmeter yes/no : Yes- Quantity of pressure gauges no. : 5- Other control functions yes/no : No

E.3.4 Remote Control PanelsMake/model : Koomey Zone I Location : Rig floor Location : TP officeAbility to operate main closing unit valvesdirectly yes/no : Yes System routing (direct/thru panel) : Direct Remote control of system pressureregulator yes/no : Yes (from the Drill Floor) Remote control of annular pressureRegulator yes/no : Yes (from the Drill Floor)

E.4 CHOKE MANIFOLDAll appropriate components H2S rated yes/no : Yes

E.4.1 Choke Manifold (For instrumentation, see H.3)Nominal size in : 3-1/16Minimum ID in : 3.063Maximum working pressure psi : 15,000Quantity of fixed chokes no. : 1- Make/model : Demco- Size (ID) in : 3Quantity of adjustable chokes no. : None- Make/model :- Size (ID) in : Quantity of power chokes no. : 2- Make/model : Demco- Size (ID) in : 2 in maxPower choke remote control panel yes/no : Yes- Make/model : Demco- Location : Driller’s house- Glycol injection yes/no : No

E.5 FLEXIBLE CHOKE &KILL LINES (BOP to Manifold)Quantity no. : 2Make/type : HoseID in : 3Working pressure psi : 15,000H2S service yes/no : Yes

E.6 FLEXIBLE BOP CONTROL HOSESQuantity no. : 16Make/model : HydrasunSize (ID) in : 1Working pressure psi : 3,000Fire resistant yes/no : Yes

E.7 BOP TESTING EQUIPMENT

E.7.1 Hydraulic BOP Test PumpMake/model : Koomey Type : Air Pressure rating psi : 30,000Chart recorder yes/no : Yes

E.7.2 BOP Test StumpSize in : 13-5/8, 15,000psi

E.8 BOP HANDLING

E.8.1 BOP Hoist SystemMake/type : BEEBE Quantity of hoists no. : 2Number of lift points on BOP no. : 2System safe working load (max BOP wt) st : 2 x 37.5 tonnes

E.8.2 Work PlatformsBOP work platform (adjustable/fixed/none) : FixedConductor pipe platform yes/no : Yes

E.8.3 Conductor Pipe Tensioning SystemMake/type : HydrilTension capacityNumber of lift points

st :no. :

300 kips4

Stroke in : 16

F MUD SYSTEM / BULK SYSTEM

F.1 HIGH PRESSURE MUD SYSTEMSystem working pressure psi : 5,000System test pressure psi : 5,000

F.2 Mud PumpsQuantityMake

no. ::

3National-Oilwell

Model : 12-P-160Type (triplex/duplex) : triplexMud pump drive motors no. : 2- Motor type : Jeumont Schneider DC 752- Continuous power rating per motor : 1,600 hpMud pump drive motors no. : 1- Motor type : GE DC 752- Continuous power rating per motor : 1,600 hpFluid end type : Southwest- Maximum working pressure psi : 5,000- Test pressure psi : 5,000Pump stroke counter type : Martin DeckerSupercharging pump type : Mission- Driven by motor of power hp : 75Discharge suction line ID inch : 12M.P Pulsation dampener type : HydrilReset relief valve : Retsco Type B Working flowrate per pump at90% of max gpm : 600 gpm- Liner size inch : 6-1/2- Pump speed (90% of max) spm : 120- Pump pressure psi : 3,900- Working flowrate US gpm : 514

F.2.1 Transfer Pumps / Mixing PumpsMixing Pumps:- Quantity no. : 2- Make/model : Mission Magnum 1- Type/size : Centrifugal / 8x6R- Output capacity US gpm : 1,200- Drive motor type : Electric- Power output hp : 75Transfer Pumps:- Quantity no. : 2- Make/model : Mission Magnum 1- Type/Size : Centrifugal/8 x 6R- Output capacity US gpm : 1,200- Drive motor type : Electric- Power output hp : 75

F.2.2 Standpipe ManifoldQuantity of standpipes no. : 2Standpipes ID inch : 4 (5-9/16” OD)H-Type standpipe manifold yes/no : Yes Kill line outlet yes/no : Yes Fill-up line outlet yes/no : Yes Bleed-off line outlet yes/no : Yes

F.2.3 Rotary HosesQuantity no. : 1Make/type :ID x Length inch x ft : 3-1/2 x 80Working pressure psi : 5,000Snubbing lines yes/no : Yes

F.2.4 Cementing HosesQuantity no. : 1Type (armor sheath/flexible steel pipe) : Steel internal wound RubberLength ft : 80ID Inch : 2Working pressure psi : 10,000

F.3 LOW PRESSURE MUD SYSTEM

F.3.1 Shale ShakersPrimary:- Quantity no. : 3 (brand NEW not commissioned even)- Make/model : Axiom AX1- Type :- Nominal flow rate (total) bbl/min : Variable up to 1000gpm per shaker dependent on screen size and fluid properties

F.3.2 Mud/Gas Separator (Poor Boy)Make/type : Swaco Dimensions (height x OD) ft x in : 10 ft x 4 ft Gas discharge line ID in : 8 inGas discharge location, primary : Crown A-frameCan discharge be tied into burner system : No Vacuum break yes/no : Yes Mud seal height ft : 24Pressure gauge yes/no : YesCalculated gas throughput mmscf : 17.83

F.3.3 DegasserMake/type : Wellco 5200Nominal flow rate bbl/min : 600Feed pump make/model : Mission 6 x 8- Type/size :- Capacity gpm : 1,200- Drive motor hp hp : 75Is pump dedicated to degasser yes/no : YesVacuum pump make type : Wellco

F.3.4 Mud AgitatorsQuantity no. : 1Make/model : Swaco SWM-5Driven by motor of power hp : 5Located in tanks : Slug pit(see F.2.1 & F.2.2 for tank designations)Quantity no. : 4Make/model : Swaco SWM-25Driven by motor of power hp : 25Located in tanks : Tanks 1, 2, 3, 4 (see F.2.1 & F.2.2 for tank designations)

F.4 BULK SYSTEM

F.5 Barite/Bentonite SilosQuantity no. : 4Capacity of each silo ft3 : 1307Locations : P/tank room Type weight loadcell : Martin Decker Manufacturer : TotcoPressure rating psi : 40Relief valve(s) installed yes/no : Yes

F.5.1 Cement SilosQuantity no. : 4

Capacity of each silo ft3 : 1307Locations : P/tank room Type weight loadcell : Martin Decker Manufacturer : Totco Pressure rating psi : 40Relief valve(s) installed yes/no : Yes Separate mud/cmt loading facilities yes/no : Yes Cement discharge independent frombarite/bentonite yes/no : Yes

F.5.2 Surge Tank for Barite/BentoniteQuantity no. : 2Capacity of each tank ft3 : 70 ft3Type weight loadcell : Totco- Manufacturer : TotcoPressure rating psi : 20Relief valve(s) installed yes/no : Yes

F.5.3 Mud HopperQuantity no. : 2Make/model : Double Life JettingFeed pump make/model : ASF.12Type/size : Capacity bbl/min : 1,200Drive motor hp hp :Is feed pump dedicated to mud hopper(s)yes/no : No

G CASING / CEMENT EQUIPMENT

G.1 CEMENTING EQUIPMENT

G.1.1 Cementing ManifoldDischarge manifold working pressure : 15,000 psi Cement pump discharge lines min ID : 2 in Cement pump discharge linesworking pressure psi : 15,000Manifold safety pressure relief valve yes/no : Yes

G.1.2 Cementing StandpipeQuantity no. : 1Working Pressure psi : 15,000ID inch : 3Connection to choke manifold yes/no : YesConnection to standpipe manifold yes/no : Yes

H INSTRUMENTATION/COMMUNICATION

H.1 DRILLING INSTRUMENTATION AT DRILLER=S POSITION

H.1.1 Weight IndicatorMake/type : Martin Decker / Type E-80Sensor type : AWE 9-1

H.1.2 Standpipe Pressure GaugesQuantity no. : 1Make/type : Martin DeckerMax. pressure reading psi: : 5,000Quantity no. : 1Make/type : Martin DeckerMax. pressure reading psi : 5,000

H.1.3 Choke Manifold Pressure GaugeQuantity no. : 1Make/type : Stewart & StevensonMax. pressure reading psi : 15,000Quantity no. : 1Make/type : Martin DeckerMax. pressure reading psi : 15,000

H.1.4 Rotary Instrumentation

H.1.4.1 TachometerMake/type : Martin DeckerMaximum RPM rpm : 250

H.1.4.2 Torque IndicatorMake/type : Martin DeckerMaximum torque ft/lbs : 50,000

H.1.5 Top Drive Instrumentation

H.1.5.1 TachometerMake/type : Martin DeckerMaximum RPM rpm : 250

H.1.5.2 Torque IndicatorMake/type : Martin DeckerMaximum torque ft/lbs : 50,000

H.1.6 Pump Stoke CountersQuantity no. : 2Make/type : TotcoStoke indicator and cumulativeStroke counter for each pump : Yes

H.1.7 Tong Torque IndicatorMake/type : Martin DeckerMaximum torque ft/lbs : 25K x tong length

H.1.8 Pit Volume TotalizerMake/model: Electro FlowFloats in active mud tanks : Yes- Quantity per tank : no. : 1Floats in reserve mud tanks : Yes- Quantity per tank no. : 1Floats in mud processing tank : Yes- Quantity per tank: no. : 1Loss/gain indicator yes/no : Yes Audio Alarm yes/no : Yes Visual Alarm yes/no : Yes

H.1.9 Mud Flow IndicatorMake/model : Electro FlowHigh/low Alarm : Yes- Audio Alarm yes/no : Yes- Visual Alarm yes/no : YesSensor location: : Flow line

H.1.10 Trip Tank IndicatorMake/model : Electro FlowChart recorder yes/no : Yes

Alarm yes/no : Yes

H.2 DRILLING PARAMETER RECORDERQuantity no. : 1Make/type : Petron Drill GrafLocation - 1 : Driller’s house- Type (display/recorder/both) : DisplayNumber of parameters recorded no. : 6Parameter recorded : WeightParameter recorded : Pump pressureParameter recorded : Rotary torqueParameter recorded : Rotary RPMParameter recorded : Pump SPMParameter recorded : Penetration rate

Brand new Electro wave Transocean Driller’s display system, not commissioned yet.

H.3 INSTRUMENTATION AT CHOKE MANIFOLD

H.3.1 Standpipe Pressure Gauge (Drillpipe Pressure Gauge)Quantity no. : 1Make/type : Houston Digital DisplayPressure range (max.) psi : 6000Visible from choke operation position : Yes

H.3.2 Choke Manifold Pressure Gauge (Casing Pressure Gauge)Quantity no. : 1Make/type : Houston Digital DisplayPressure range psi : 6000Visible from choke operating position : Yes

H.4 INSTRUMENTATION AT STANDPIPE

H.4.1 Standpipe Pressure GaugeQuantity no. : 2Make/type : MD TotcoPressure range psi : 8000

Visible from drillers position : YesVisible from choke operation position : Yes

H.5 RIG COMMUNICATION SYSTEMS

H.5.1 Rig Telephone SystemNo. of stations no. : 67 extensionsMake/type : Panasonic KXDT 1232Explosion proof yes/no : Yes

H.5.2 Public Address SystemCan be combined with H.6.1 above: yes/no : YesNo. of stations no. : 67 (access from all telephones) Make/type : Federal Signal Dual Redundant Explosion proof yes/no : Yes - where applicable

H.5.3 Drill Floor Talkback SystemNo. of stations no. : 2Location : Drill floor Location : Monkey board Make/type : Gaitronics Explosion proof yes/no : Yes

H.6 EXTERNAL COMMUNICATIONS EQUIPMENT

I WORKOVER TOOLS

J ACCOMMODATION

J.1 LIVING QUARTERS

J.1.1 Accommodation BlockTotal beds: no. : 43- No. of beds per room type (1, 2, 3, etc.) no. : 2 (1 ea. 1 man)- Number of rooms no. : 22- Toilets (shared) no. : 0- Showers (shared) no. : 0Total beds: no. : 43

K SAFETY EQUIPMENT

K.1 GENERAL SAFETY EQUIPMENT

K.2 SURVIVAL EQUIPMENT

K.2.1 LifeboatsMake/type : Survival craft 75 C Quantity no. : 4Capacity (person/craft) : 60Locations (port, stbd) : Port and stbd Fire protection yes/no : Yes Radio/EPIRB (see Section H.9) : NO

K.2.2 DavitsDavits : 4 ea.Make: : Survival craft inspectorateType: : Rig Master SWL: : 8.5 T Class: : DNVYear: : 2008