webdynpro wda select option usage
DESCRIPTION
TRANSCRIPT
webdynpro select option usagewebdynpro select option usage
Skill cut
Copyright © 2006 by BNE Solution Consulting INC. ALL RIGHTS RESERVED.No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means- electronic, mechanical, photocopying, recording, or otherwise- without the permission of BNE Solution Consulting.
This document provides an outline of a presentation and is incomplete without the accompanying oral commentary and discussion.
2 Copyright © 2007 by BNE Solution Consulting INC. ALL RIGHTS RESERVED.
Module Task
Stage Task 명
Phase 명 산출물명
순번 버전 작성일자 작성자 변경사유 검토일자 검토자 승인일자 승인자
1 Ver1.0 정세훈 최초작성
Document ControlDocument Control
3 Copyright © 2007 by BNE Solution Consulting INC. ALL RIGHTS RESERVED.
Procedure 1. Component 에 WDR_OVS component 를 추가한다 .
참고사항
Related Link
목적 • select option usage 를 사용 할 수 있다 ..
메뉴
4 Copyright © 2007 by BNE Solution Consulting INC. ALL RIGHTS RESERVED.
Procedure 1. Select option usage 를 사용할 view 의 property 에 select option 을 선언한다 .
참고사항
Related Link
목적 • select option usage 를 사용 할 수 있다 ..
메뉴
5 Copyright © 2007 by BNE Solution Consulting INC. ALL RIGHTS RESERVED.
Procedure 1. Layout 에 viewcontainerUI 를 그린다 .
참고사항
Related Link
목적 • select option usage 를 사용 할 수 있다 ..
메뉴
6 Copyright © 2007 by BNE Solution Consulting INC. ALL RIGHTS RESERVED.
Procedure 1. Viewcontainer 에 WND_SELECTION_SCREEN 을 embed한다 .
참고사항
Related Link
목적 • select option usage 를 사용 할 수 있다 ..
메뉴
7 Copyright © 2007 by BNE Solution Consulting INC. ALL RIGHTS RESERVED.
Procedure 1. View 에 M_HANDLER TYPE IF_WD_SELECT_OPTIONSM_WD_SELECT_OPTIONS TYPE IWCI_WDR_SELECT_OPTIONS를 선언한다 .
참고사항
Related Link
목적 • select option usage 를 사용 할 수 있다 ..
메뉴
8 Copyright © 2007 by BNE Solution Consulting INC. ALL RIGHTS RESERVED.
Procedure 1. WDDOINIT 에 다음 CODE 를 삽입한다 .
참고사항
Related Link
목적 • select option usage 를 사용 할 수 있다 ..
data : lr_componentcontroller type ref to ig_componentcontroller, l_ref_cmp_usage type ref to if_wd_component_usage, lt_range_table type ref to data.
l_ref_cmp_usage = wd_this->wd_cpuse_select_options( ). if l_ref_cmp_usage->has_active_component( ) is initial. l_ref_cmp_usage->create_component( ). endif.
wd_this->m_wd_select_options = wd_this->wd_cpifc_select_options( ). wd_this->m_handler = wd_this->m_wd_select_options->init_selection_screen( ).
lt_range_table = wd_this->m_handler->create_range_table( i_typename = 'ZEREQ_PERNO' ). "<= variant type
wd_this->m_handler->add_selection_field( i_id = 'REQ_PERNO' it_result = lt_range_table i_no_extension = abap_true i_no_intervals = abap_true i_value_help_type = if_wd_value_help_handler=>co_prefix_ovs i_description = string1 i_read_only = abap_false ).
메뉴
9 Copyright © 2007 by BNE Solution Consulting INC. ALL RIGHTS RESERVED.
Procedure 1. 실제 DATA 를 SELECT 하는 부분에서 다음과 같이
사용하면된다 .
참고사항
Related Link
목적 • select option usage 를 사용 할 수 있다 ..
DATA : rt_req_perno TYPE REF TO data.
FIELD-SYMBOLS : <fs_req_perno> TYPE table.
rt_req_perno = wd_this->m_handler->get_range_table_of_sel_field( i_id = 'REQ_PERNO'). ASSIGN rt_req_perno->* TO <fs_req_perno>.
SELECT WHERE req_perno IN <fs_req_perno>.
메뉴
10 Copyright © 2007 by BNE Solution Consulting INC. ALL RIGHTS RESERVED.
Procedure 1. 결과화면
참고사항
Related Link
목적 • select option usage 를 사용 할 수 있다 ..
메뉴