wedges by double taper - welcome to madsen's · pdf filefaller's wedges l “the...
TRANSCRIPT
Faller's Wedges l
“The Pro’s Choice” 1
Double Taper™ Standard Double Taper wedges are made of hard ABS plastic and feature a bright orange top. They are durable all-season wedges
#59-A 51⁄2" Textured .......................................................399 335 310 285
#97-A 7" Double Lift - Smooth ....................................889 760 695 665
#98-A 8" Smooth ........................................................810 675 615 580
#100-A 10" Smooth ........................................................889 760 695 665
#110-A 10" Double Lift - Smooth ....................................990 835 765 725
#111-A 10" Textured .......................................................955 795 725 685
#112-AS 12" Smooth .......................................................1310 1095 995 945
#112-AT 12" Textured ......................................................1310 1095 995 945
#114-A 12" Extra Wide - Smooth ...................................1375 1155 1045 985
#115-A* 15" Smooth .......................................................1795 1495 1395 1285
*Note: The 15" wedge has a unique rounded tip and extra lift. In addition to its use as a wedge in large trees, it's often used as a hammer for setting smaller wedges.
Double Taper™ Super-TuffDouble Taper Super-Tuff wedges are made of tough poly plastic. This is a softer material than ABS. They are a good choice when working in cold conditions. We have never had a broken one, but because they are soft, the heels tend to "beat over" more quickly than ABS wedges.
#96-P 8" Poly Textured ...............................................425 365 335 315
#111-P 10" Poly Textured ...............................................590 510 475 450
#112-PT 12" Poly Textured ...............................................735 615 570 535
Double Taper™ Red-TopDouble Taper Red-Top wedges are made of ABS plastic. The wedge body is white and has a red top. Their look is similar to a K & H wedge, but they are less expensive.
#10-RT 10" Smooth ............................................... 855 625 575 540
DOUBLE LIFTTEXTURED
MADSEN’S PRICE Part # Size Description List Price 1-11 ea 12-47 ea 48+ ea
SINGLE LIFT
Wedges by Double Taper™Piller Plastics, the maker of DOUBLE TAPER brand faller's wedges, has been making wedges since 1963. They are the first choice of professional timber fallers everywhere.
Some Double Taper wedges have smooth sur-faces and some are textured. Wedges with smooth surfaces drive the easiest, but tex-tured wedges hold a little better in the tree.
Faller's Wedges
Call (360)736-1336 24 hours2
K&H faller's wedges are known for being easy to drive and having great lifting power.
K&H - Single Lift - Hard - White Plastic with a Red Colored Top
7 1⁄2" Lightly Textured ................................................................895 765 695 645
10" Lightly Textured .............................................................. 1045 825 765 725
12" Lightly Textured .............................................................. 1250 1045 965 915
MAG ALUMINUM DRIVER WEDGE can be used like a reg-ular wedge for lifting or as a driver to set plastic wedges. It features a “hand hold” cast into each side for extra grip when using it as a driver.
Mag Aluminum Driver Wedge
MADSEN'S wedges are premium grade hi-impact plastic wedges made by Piller Plastics. These wedges offer both quality and extra value.
Wedges
K & H Wedges
Blue Ox - Single Lift - Hard - Blue Plastic
# 8B-WGM 8" Lightly Textured ............................................685 420 380 365
#10B-WGM 10" Lightly Textured ............................................830 475 435 410
#12B-WGM 12" Lightly Textured ...........................................1155 675 610 570
Blaze Pro - Single Lift - Hard - Fluorescent Orange Plastic
#OFL-96M 8" Lightly Textured ............................................510 430 395 375
#OFL-105M 10" Lightly Textured ............................................620 490 445 420
#OFL-112M 12" Lightly Textured ............................................830 690 630 585
MADSEN’S PRICE Part # Size Description List Price 1-11 ea 12-47 ea 48+ ea
MADSEN’S PRICE Size Description List Price 1-11 ea 12-47 ea 48+ ea
List 2575
MADSEN’S 1-11 1985
12+ 1820
Faller's Wedges l
“The Pro’s Choice” 3
Wedge Pouches
Nylon PouchList 1300
MADSEN’S 1-5 995
6+ 895
We carry two types of wedge pouches: one is a leather pouch, the other is made of tough Cordura nylon. Both pouches are the same size and have space for two or three wedges and a file or bar tool.
Utility BeltsUTILITY BELTS are tough and adjustable. They work great with a wedge pouch, a L i t t l e Shot pouch, or an axe holder.
Black Bear Rifled Faller’s WedgesTimber Fallers: How many times have you had a tree sit back because the stack of wedges you were driving twisted?
Black Bear Wedges help:• Save time• Increase productivity• Make tree work safer• Aid tree placement
BLACK BEAR WEDGES were designed by a timber faller. Each wedge has a pair of grooves and matching rails to keep them aligned when they are stacked. This overcomes the problem conventional wedges have of skewing sideways at a crucial time.
Top View
Black Bear - Single Lift - Hard - Yellow ABS Plastic
#8 -BEAR 8" Smooth ..................................................829 695 645 615
#10 -BEAR 10" Smooth ..................................................920 735 680 640
#12 -BEAR 12" Smooth .................................................1235 995 905 870
MADSEN’S PRICE Web Belt .............................650
Web Belt with Grommets ....850
Leather PouchList 2590
MADSEN’S 1-5 1995
6+ 1895
MADSEN’S PRICE Part # Size Description List Price 1-11 ea 12-47 ea 48+ ea
Axes
Call (360)736-1336 24 hours4
1 3/4 lb Hunter’s Hatchet 18” curved 2095 1595 1495
•Agreatcampinghatchet
2 1/4 lb Boy’s Axe 28” curved 2475 1795 1695
•Aperfectkindlingaxe
3 1/2 lb Crown Double Bit 36” straight 3285 2495 2395
•Agoodaxeforthefirebox
3 1/2 lb Michigan Axe 28” straight 3675 2895 2795
•Agreatall-aroundchoiceforafaller’saxe
3 3/4lb Pulaski 36”straight 4045 2995 2895
•Anecessityinthefirebox
6 lb Splitting Maul 36” straight 3340 2495 2395
•Agoodtoolforsplittingsmallsizedfirewood
8 lb Splitting Maul 36” straight 3630 2695 2595
•Agoodtoolforsplittinglargesizedfirewood
12 lb Splitting Maul 30” straight 5195 3995 3795
•Drop-forgedhigh-carbonsteelhead.Cushiongrip, allsteelhandle.Shapeofheadpreventssticking.
5 lb Splitting Wedge none 2290 1595 1435
•Anaidforsplittingstubbornfirewood
MADSEN’S PRICE Style Head Size Description Handle Type List Price 1-5 ea 6+ ea
The axes and mauls listed below are fitted with hand-selected hickory handles (except for the 12 lb. maul).
Council Faller's Axe
Axes & Mauls
The COUNCIL FALLER'S AXE head features a narrow-ground bit for chop-ping, thick cheeks for strength, and a finish-ground poll (heel) for driving plastic wedges. The head is made from American bar quality steel, but patterned from a European style, so you might find them a little heavy for their weight classification. It is also drop forged, heat treated, and ground.
3.5 lb Axe with 20" handle 4810 3295 3150
4 lb Axe with 28" handle 6500 4495 4350
5 lb Axe with 28" handle 7125 4895 4750
6 lb Axe with 36" handle 7440 4995 4850
MADSEN’S Axe Type Handle List 1-5 ea 6 +ea
Hickory Axe Handles |
“The Pro’s Choice” 5
Type Length/Description List MADSEN’S Price 1-11 12+
28" boys,singlebitcurved 1465 1095 995
36" axe,singlebitcurved 1465 1095 995
28" axe,fits4#&5#Council 1465 1095 995
36" axe,fits6#Council 1465 1095 995
28" cruiser,doublebit 1465 1095 995
36" crown,doublebit 1465 1095 995
30" sledge 1465 1095 995
36" sledge 1465 1095 995
36" heavy sledge 1465 1095 995
36" maul axe eye 1465 1095 995
54” peavey 6095 4695
Axe handles come with wood mounting wedges only. Extra wood mounting wedges are 25¢ each. Metalmountingwedgesare45¢eachandcomeintwosizes:small&medium.
TUNE YOUR AXE to your body – just pick the handle length that best fits your swing and axe head weight. All custom handles are straight single bit style. They are made from premium grade white hickory for maximum strength and durability. They are available in the following lengths: 20", 26", 28", 30", 32", & 36".
HIGH GRADE HICKORY is a tough and dense wood from which the finest tool handles are made. They are durable, they hold metal heads when properly installed, and they absorb some of the vibration created when a striking tool is used for chopping or pounding. Over the years we have experimented with handles made from other materials (such as fiberglass), but most loggers and timber fallers always come back to premium hickory handles.
Madsen’s Custom Rafting Axe Handles
MADSEN’S
1-11 1095
12+ 995
Hickory Handles
Master Page
Call (360)736-1336 24 hours6 Call (360)736-1336 24 hours6
Sabbards
The ALUMINUM AXE SCABBARD is made of lightweight tempered aluminum. This lightweight material is also tough and will last much longer than scabbards made from other materials. It is designed to stay clean of dirt, bark, and sawdust.
# Fits Axe Size MADSEN’S
#6 Fits 3 lb - 31⁄2 lb axes 2160
#7 Fits 4 lb axes 2245
#8 Fits 5 lb axes 2330
#9 Fits 6 lb axes 2460
Aluminum Axe Scabbard
Fitting instructions: Axe should be about 1⁄8" smaller than the scabbard to go into and out-of the scab-bard smoothly and freely.
Byte Tyte Chainsaw Scabbard Mount
For proper protection and coverage, a Byte Tyte must be fitted to the saw it carries. It is available in 13”, 16”, 20”, 24”, and 30” lengths. Custom lengths are available by special order.
The Byte Tyte's all-aluminum construction does not damage the saw's chain, and at the same time, it protects the area around the saw's chain from being damaged by it.
16" Scabbard 7050 6750
20" Scabbard 7150 6850
24" Scabbard 7350 6950
Item List MADSEN’S
The BYTE TYTE is a chainsaw mounting device used to safely transport a ready-to run chainsaw on a 4-wheeler, a snowmobile, a tractor, a motorcycle, or any type of equipment. Forget elastic cords that take time to hook and unhook, and eventually get cut by the saw chain. With a Byte Tyte, simply slide the saw's bar and chain into the opening, then turn the screw-clamp to hold the saw in place. When you are ready to use the chainsaw, a reverse turn of the clamp releases it just as quickly.
Master Page l
“The Pro’s Choice” 7
Hand Tools & Fire Tools l
“The Pro’s Choice” 7
MACHETEwith hand-grip
List 1550
MADSEN’S
1-5 995
6+ 895
PEAVEY54" handle
List 11795
MADSEN’S
1-5 9395
6+ 8895
1 1/2 lb HOOKAROON36" curved handle
List 5050
MADSEN’S 1-5 3995
6+ 3895
SHOVELwith foot rest
List 1595
MADSEN’S 1-5 1095
6+ 995
Shovel & Hand Tools
The ext inguisher and pouch are sold separately.
Fire Extinguisher
Fire Pump Can
ExtinguisherPouch
The EXTINGUISHER POUCH is made of tough Cordura nylon. It has a belt loop attachment for easy carrying. Item #P500S
List 1100
MADSEN’S 1-11 995
12+ 895
List 22595
MADSEN’S
15450
The SMALL FIRE EXTINGUISHER is a safe, clean, and fast way to suppress a small wood, paper, liquid, or grease fire. It is not for use on electrical fires. No shaking is necessary and its non-powder agent is non-toxic, biodegradable, and environmentally safe. Contains 16 oz.
The BAK-PAK Fire Pump Can is recom-mended for forest and grass fires or whenever a hand held water extinguisher is required.
The reservoir will hold five gallons of water which can be squirted on a fire with a brass hand pump.
List 1995
MADSEN’S 1-11 1495
12+ 1395
Master Page
Call (360)736-1336 24 hours8 Call (360)736-1336 24 hours8
Automatic Logger's Measuring Tape
# 950 50' Traditional Logger’s Tape - auto gear drive 5950 3495 3295
Bladetop:feet,inches,eighthsofinches Bladebottom:feet,inches,eighthsofinches# 950XL 65' Same Size as #950 - metric on bottom 6300 3795 3595
Bladetop:feet,inches,eighthsofinches Bladebottom:meters,centimeters# 975 75' Big Version of the #950 - automatic gear drive 7650 4395 4195
Bladetop:feet,inches,eighthsofinches Bladebottom:feet,inches,eighthsofinches
Other tapes are available, such as the 100' automatic and various Diameter tapes. Call us.
SPENCER automatic tapes are the industry standard for measuring logs. What started out as one logger's tape has grown to a full line of measuring tapes for loggers, engineers, and foresters.
MADSEN’S PRICE Model # Length Description List Price 1-5 ea 6+ea
We carry a complete line of repair parts and blades for automatic logger’s tapes. If you need a diameter tape refill or some other specialty blade not listed, please call. We stock many items not listed.
50' Standard Refill by Spencer 1595 1095 995
65' Standard/Metric Refill by Spencer 2135 1695 1595
75' Standard Refill by Spencer 2340 1895 1795
18" Repair End with Loop - Dymax 765 675 630
12” Repair End with Loop - Steel 485 395 370
Pre-bent Horseshoe Nail 85¢ 65¢ 60¢
Long Straight Horseshoe Nail 35¢ 30¢ 25¢
Scissor Style Swivel Clip 490 395 350
MADSEN’S PRICE Item Image Description List Price 1-5 ea 6+ea
Spencer Logger’s Tapes
Tape Refills, Repair Ends, & Nails
Master Page l
“The Pro’s Choice” 9
Tape Parts & Marking Products l
Please see the refill page for a complete listing of this item.
50' and 65' 75' 100' Description #950 and #950XL #975 #900
# 1 post screw #968 $ .35 #968 $ .35 #968 $ .35# 2 gear housing with bearing 958 11.70 978 12.70 978 12.70# 3 main shaft and gear 952 7.65 952 7.65 952 7.65# 4 idler gear and pinion 953 5.20 953 5.20 953 5.20# 5 idler bearing with screw 954 3.35 954 3.35 954 3.35# 6 gear cover plate 957 2.10 977 2.35 977 2.35# 7 nylon guide post with screws 961 1.40 961 1.40 961 1.40# 8 spacer post with 2 screws 955 1.20 955 1.20 955 1.20# 9 tape refill screw 966 .35 966 .35 966 .35# 11 spool with pinion gear 951 12.35 901 14.25 901 14.25# 12 spring cover plate with bearing 959 3.95 979 4.85 979 4.85# 13 super spring assembly 956SA 16.30 976SA 19.60 906SA 19.95# 14 hanger and swivel clip 962A 5.25 962A 5.25 962A 5.25#15 lockingring 960 2.35 980 3.35 980 3.35
Spencer Tape Parts
Lumber Crayons Markal PaintstiksMARKAL "B" PAINTSTIKS are used in log yards and mills where fade resistant marking is important. Paintstiks make long-lasting weather resistant marks on rough, smooth, wet, or dry surfaces. White is priced below.
DIXON lumber crayons are industry standards for marking wood indoors or outdoors. They are made from high quality clays and pigments. Their exclusive process produces the stron-gest, longest wearing crayon on the market. We carry: Soft Blue, Soft Red, Yellow, and Carbon Black.
List 120
MADSEN’S
1-11 89¢12-143 70¢144+ 65¢
Crayon Holder $945 Each
We also stock: Red, Blue, and some Fluorescent colors. These are slightly more expensive. Call for prices.
List 175
MADSEN’S 1-11 125
12-143 110
144+ 105
Measuring Tools
Call (360)736-1336 24 hours10
NOTEBOOKS contain 50 lined pages and are spiral bound. They fit easily in a large shirt or hip pocket. Notebooks work great for keeping track of scale or other records.
The HAND COUNTER is a 4-digit model with a wire finger ring. Counter is easily reset with one turn of the knob and is easy to read.
Hand Tally Counter
Humidity TesterTest humidity easily with this battery operated thermometer/hygrometer. No more slinging thermometers or wetted wicks. This hand held tester measures temperature and humidity with a simple touch of a button.
ShirtPocketSize HipPocketSize
List Price 17000
MADSEN’S PRICE
13450
Hip ChainThe HIP CHAIN attaches to your belt and mea-sures distance as you walk. Just tie the string to a tree, set the meter at zero and walk. Your hands are free and there is no tape to tangle up. There is approximately 4500' of string on a roll.
Extra White String 495
List 525
MADSEN’S 1-11 445
12+ 405
List 675
MADSEN’S 1-11 545
12+ 485
Scribner Scale BookThe SCRIBNER SCALE BOOK contains log volume tables. It is printed on rain proof paper and has a durable poly cover. Book is pocket sized for convenient carrying.
List 1365
MADSEN’S
1-11 1195
12+ 1095
List Price 1150
MADSEN’S 950
List Price 8000
MADSEN’S 6495
Notebooks
List 1389
MADSEN’S 1-11 895
12+ 795
Key Bak
Keep your keys or crayon holder handy with a KEY BAK. It is available with either a spring clip or belt loop so you can hook 'em on your suspenders or jeans.
belt loop spring clip
Item# 490-72655
Item# 350-ASCFF
“The Pro’s Choice” 11
Marking Products l
RUDD AEROSOL marking paint is fast, convenient, and easy to use. It makes highly visible marks that are resistant to weathering. Shipping is free on orders of 50+ cases or large quantity bulk purchases. Call for more information on shipping and delivery. Call for quotes on quantity purchases.
Tree and log paint13 oz aerosol 645 525 480
Colorsare:Orange,Red,Blue,Green,White,Yellow,Black
Hi-viz fluorescent paint12 oz aerosol 805 655 595
Colorsare:Red/Orange,Blue,Green
We can now send this UPS! Call today.
MADSEN’S Type List Price 1-11ea 12+ea
Tree & Log Paint
Roll FlaggingThis flagging is the brightest and toughest we can find. It has extra plasticizers for increased flexibility and cold weathering. It also has a high tensile strength. The glo colors have extra coloring for longer life. It is made in the USA and meets or exceeds GSA requirements.
MADSEN’S PRICE Color/Type Size Roll Length List 1-11ea 12+ea 144+eaStandard Flagging Colors:
OrangeGlo,PinkGlo,BlueGlo,LimeGlo 1 3⁄16" 50 yards 230 199 169 149
Red,White,Blue,Yellow,Green 1 3⁄16" 100 yards 230 199 169 149
Red/WhiteStripe,Blue/WhiteStripe 1 3⁄16" 100 yards 349 299 239 209
PrintedBoundary&HazardFlaggingType&Color:
Danger-Stop-Danger (Orange Glo) 1 1⁄2" 50 yards 399 339 289 259
TimberHarvestBoundary(PinkGlo) PropertyLine(PinkGlo) Streamside Management Zone (Orange Glo)
Custom flagging printed with your company name or special message is available. Call for information about minimum order size, set-up charges, and lead time.
Master Page
Call (360)736-1336 24 hours12
Tree Pruning Tools
Call (360)736-1336 24 hours12
3/4" Hand Pruners
Hand Pruning Saw
FANNO HAND PRUNING SAWS feature high quality tri-edge blades. These blades cut clean and fast saving you time and labor. The blades are manufactured in Japan to Fanno’s specifications. They are then imported into the USA, where marine-grade laminated hardwood handles are installed. The result is a high quality, yet affordable hand saw.
PHOENIX HAND PRUNERS have forged hooks and blades. Both the #40012 and #40150 are made of high-carbon Japanese steel. They also have rounded steel handles and an ergonomic grip.
Item List 1-9 ea 10+ ea
Complete Saw 2518 1995 1795
Blade Only 1870 1495 1250
Pruner List MADSEN’S
#40012 1295 1100
#40017 695 550
#40150 2250 1800
#40012 #40150#40017
Rope & Gear Bags
Item# 249-521
Item# 249-541
Bags MADSEN’S
#BAG102 Fits 150’ 1/2” Rope 3600
#BAG103 Fits 225’ 1/2” Rope 4300
#BAG113 Throwline Cube 2800
List 4195
MADSEN’S 3200
List 14000
MADSEN’S 12900
Throwline Kit
Throwline Sling ShotThe Big Shot Line Launcher can shoot your throw weight up to a hundred feet into a tree. Kit includes two sturdy fiber-glass poles and sling head.
THROWLINE kit includes storage bag, throw weight, and 150’ line. These lines are strong and easy to spot in the tree.
Master Page l
“The Pro’s Choice” 13
Climbing Gear l
“The Pro’s Choice” 13
1/2” SAMSON ARBOR-PLEX was one of the first lines ever designed specifi-cally for tree work and remains the choice of many arborists. It is one of the lightest lines we sell, yet has a breaking strength of 6000 lbs.
1/2” SAMSON TRUE BLUE is a premium rope made of 100% polyester. It is a 12-strand single braid, which helps give it is strong 7300 lbs. breaking strength.
Climbing Rope
Rigging Rope
Rope 120’ 150’ 600’ #AP1212 #AP1215 #AP1260
Arbor Plex 6900 8700 33900
#TB12 #TB15 #TB60
True Blue 10700 13300 49900
Call for a price on a custom length.
Rope MADSEN’S
200’ 3/4” Stable Braid w/eye - Orange 32900
18’ 5/8” Stable Braid w/eye sling - Red 6000
SAMSON STABLE BRAID is a great rigging line. Its 2-in-1 double-braid con-struction is a rope within a rope, giving it strength and improving the way it works in pulleys and other rigging hardware. The breaking strength is: 5/8”- 16300 lbs. & 3/4”- 20,400 lbs.
List 15600
MADSEN’S 14000
Lowering DeviceThe PORT-A-WRAP III DESCENDER is a tool for lowering heavy branches or tree sections. It acts as a friction device enabling a single person to control loads many times their own weight. By wrap-ping the rigging line around the Port-A-Wrap, friction is applied to the rope - the more wraps taken, the more friction applied. This simple tool has a capacity of up to 2000 lbs. The rope shown is for illustration purposes and is not included.
Item# RIG-111
Chainsaw Lanyard50” CHAINSAW BUNGEE LANYARD breaks away at 250 lbs shock load to help prevent the climber from being pulled out of the tree by a fall-ing load hitting the saw. Not for saws over 15 lbs.
48" NON-BREAKAWAY BUNGEE CHAINSAW STRAP is blaze-orange. It also has a dog-leash style snap closure that easily attaches to the rope-loop on today's arborist's chain saws.
List 2300
MADSEN’S 1900
Item# STR108
List 2795
MADSEN’S 2500
Item# 249-451
Item# 249-361
Master Page
Call (360)736-1336 24 hours14 Call (360)736-1336 24 hours14
Climbing Gear
Spurs & Pads
Items MADSEN’S#81429RT Steel Spur Kit Steel 3 1/2” Gaff - Non-Replaceable 21500
#SB95059T Steel Spur Kit Steel 2 3/4” Gaff - Replaceable 23500
#TB95059TTitaniumBuckliteSpurKit Steel 2 3/4” Gaff - Replaceable 39500
#91429RT Spur Only Steel 3 1/2" Gaff - Non-Replaceable 16900
#SB95089A Spur Only Steel 2 3/4” Gaff - Replaceable 17900
#TB95089ATitaniumBuckliteSpurOnly Steel 2 3/4” Gaff - Replaceable 33500
#3122 Leather L pads 3700
#21391 Pair 26” Nylon Spur Strap w/Ring 2600
#2649 Pair 26” Nylon Leg Strap 2500
#21341 Pair 26” Leather Strap w/Ring 2800
#2644 Pair 26” Leather Leg Strap 2600
If you are starting out or don’t climb often and are look-ing for a complete set of spurs at a low price, the first kit is a good buy. The second kit is also a good buy and offers a replaceable gaff.
If you climb a lot and would like to save weight, the spurs with titanium supports are much lighter. If you just need to replace worn or broken parts on a set of spurs you already own, we carry a large supply of spurs, pads, straps, and accessories - some are not listed. Please call if you need something.
Deluxe Leg Pads
ALUMINUM PADS have a lightweight cast alumi-num body and are lined with dense rubber foam cushioning. Replacement cushions are available.
CUSHION WRAP PADS have a metal insert for keeping the shank stationary to reduce chafing. A Velcro wrap closure keeps the pad in place and offers adjustability for maximum comfort.
SUPER-CLIMBER PADS are the widest pads with-out a steel insert. Two straps on each pad also increases support.
ADD-ON PADS provide an extra 1/4" of padding and are worn underneath a standard climbing pad They offer additonal comfort and protection to the climber's calf from rubbing by the spur's shank.
Super-Climber Pads
Cushion Wrap Pads with Velcro Closure
Cast Aluminum BackedPadwithRubber Cushion
Items MADSEN’S
#249-741 Cast Aluminum Pads 7600
#249-761 Replacement Foam Cushion for Cast Pad 1600
#3502C Cushion Wrap Pads 13900
#249-751 Super-Climber 5100 #249-841 Add-On Pad 3900
Add-On Pads
Master Page l
“The Pro’s Choice” 15
Climbing Gear l
“The Pro’s Choice” 15
Foot PlatesFOOT PLATES attach to your spurs and spread weight beyond your arch for more comfort.
MADSEN’S 9500
Item# 35033
#91225 Spur Set with Lightweight Aluminum Pads
#91226 Spurs Set with T-Pads
#91222 Aluminum Climbers Only #90070 Lightweight
Aluminum Pads Only
MADSEN’S 11800
Climbing HelmetThis CLIMBING HELMET features a polycarbonate shell. Chin straps keep the helmet in place when work-ing at any angle.
Item# 249-943
27900 24900 219009500
Aluminum ClimbersAluminum climbers are lighter that steel and feature a straight shank and offset stirrup. Unlike one-piece climbers, these utilize a molded aluminum "J" portion that is taylor matched to an aerospace quality upright, These are tempered to T6 hardness and assembled with stainless steel fasteners.
Tree Climber's Books Rope Pulleys
TREE CLIMBER'S BOOKS cover climbing tech-niques, equipment selection, and much more.
Books MADSEN’S
#B00101 Tree Climber's Companion 1600
#B0102 Tree Climber's Guide 6500
#85225 1/2" Fixed Pulley - 20KN Rating 1100
#85226 1/2" Swing Pulley - 20KN Rating 1000
#85229 5/8" Swing Pulley - 28KN Rating 1500
#85230 3/4" Double Swing Pulley - 35KN 1900
#85225 #85226 #85229 #85230
Master Page
Call (360)736-1336 24 hours16
Climbing Gear
Call (360)736-1336 24 hours16
Steel-Core Flip-LineFlip Line
with Ascender
Flip Line Item MADSEN’S
Flip Line Item MADSEN’S
Flip Line Item MADSEN’S
Flip Line Item MADSEN’S
#75221 1/2" X 8' Line with Adjuster 11300
#75222 1/2" X 10' Line with Adjuster 11700
#75223 1/2" X 12' Line with Adjuster 11900
#75224 1/2" X 15' Line with Adjuster 12100
#75225 1/2" X 18' Line with Adjuster 12300
#75241 5/8" X 8' Line with Adjuster 11500
#75242 5/8" X 10' Line with Adjuster 11900
#75243 5/8" X 12' Line with Adjuster 12100
#75244 5/8" X 15' Line with Adjuster 12700
#75245 5/8" X 18' Line with Adjuster 13100
#FLI124K 5/8" X 12' Line with Adjuster 16500
#FLI125K 5/8" X 15' Line with Adjuster 17000
#FLI126K 5/8" X 18' Line with Adjuster 17300
#FLI119K 3/4" X 15' Line with Adjuster 17900
#FLI120K 3/4" X 18' Line with Adjuster 18400
#75000 1/2" X 8' Line Swivel Only 5500
#75002 1/2" X 10' Line Swivel Only 5900
#75011 1/2" X 12' Line Swivel Only 6100
#75015 1/2"X15’Line&SwivelOnly 6300
#75017 1/2"X18’Line&SwivelOnly 6800
#75003 5/8" X 8' Line Swivel Only 5800
#75001 5/8" X 10' Line Swivel Only 6200
#75005 5/8" X 12' Line Swivel Only 6400
#75016 5/8"X15’Line&SwivelOnly 7000
#75018 5/8"X18’Line&SwivelOnly 7400
#FLI124 5/8" X 12' Line Swivel Only 8900
#FLI125 5/8"X15’Line&SwivelOnly 9600
#FLI126 5/8"X18’Line&SwivelOnly 10400
#FLI119 3/4"X15’Line&SwivelOnly 10100
#FLI120 3/4"X18’Line&SwivelOnly 10600
The STEEL-CORE FLIP-LINE is made of bright orange 5/8” or 1/2" polyester rope braided over 1/4” steel wire cable. This makes the flip-line strong and cut-resis-tant. A locking swivel snap is included. The flip-line is available with or without the rope grab flip line adjuster and twisted clevis.
Yale Maxi Steel-Core Flip-Line
MAXI FLIP-LINE is made of 3/4" Dacron rope over a steel-core. It is available with or without a Petzl rope grab adjuster and carabiner.
Master Page l
“The Pro’s Choice” 17
Climbing Gear l
“The Pro’s Choice” 17
Flip-Line Adjuster
GibbsAdjuster
US StandardAdjuster
PetzlAdjuster
Flip Line Adjuster MADSEN’S
FLIP-LINE ADJUSTERS feature a cam-locking mecha-nism that easily adjusts a flip-line to any length. Unlike a prusik knot, they require only one hand to adjust.
#ASC103 US Std for 1/2” - 5/8” rope 5000
#ASC104 Gibbs for 5/8” - 3/4” rope 6400
#ASC102 Petzl for 5/8” - 3/4” rope 7800
Locking Rope Clip Figure 8
Steel Rope Clip#CAR402Breaks at: 5000 lbsSize: 5 1/2” X 2 1/4”Gate Opening: 3/4”Weight: 10 oz
1400
Aluminum Rope Clip#CAR410Breaks at: 6000 lbsSize: 2 3/4” WideGate Opening: 1”Weight: 6 oz
1500
Steel Swivel Clip#CAR403Breaks at: 5000 lbsSize: 5 1/2” X 2 3/4”Gate Opening: 3/4”Weight: 10 oz
2800
ROPE CLIPS are a handy alternative to carabiners for attaching your climbing line. Both have squeeze lock gates and meet ANSI stan-dards for life support .
FIGURE 8 can be used to control the descent of loads. A good item for a rescue kit.
Positive Locking Carabiners
Petzl D#CAR102 TriactBreaks at: 6300 lbsSize: 4 1/2” X 2 1/2”Gate Opening: 3/4”Weight: 2.6 oz
1800
Petzl William#CAR104 TriactBreaks at: 5625 lbsSize: 4 3/4” X 3 1/4”Gate Opening: 1”Weight: 3.1 oz
1900
A POSITIVE LOCKING CARABINER requires three motions to open their gate: push up the sleeve, twist the sleeve, and pull the gate inward.
Aluminum Large D#CAR123 TriactBreaks at: 5850 lbsSize: 4 3/4” X 3”Gate Opening: 7/8”Weight: 3 oz
1500
Petzl Am'D#CAR101 Ball LockBreaks at: 6300 lbsSize: 4 1/4” X 2 1/2”Gate Opening: 3/4”Weight: 2.6 oz
1800
Petzl Am'D#CAR103 TriactBreaks at: 6300 lbsSize: 4 1/4” X 2 1/2”Gate Opening: 3/4”Weight: 2.6 oz
1900
Figure 8 MADSEN’S
#ASC201 Aluminum 3000
#ASC204 Steel 3900
Master Page
Call (360)736-1336 24 hours18
Climbing Gear
Call (360)736-1336 24 hours18
Tree Saddles Saddle & Belt
The WEAVER SADDLE #SAD304 has split suspen-sion and is our most popular saddle. With two front D rings and two side D rings, it has four attachment points. Keeper straps prevent the front two D rings from slipping through. The leather back support is 6” high and foam filled for comfort. Sewn around the outside of the belt are five nylon loops. Each is capable of holding 15 lbs. There are also two chrome-plated brass snap clips for keeping hand tools close at hand.
The WEAVER SADDLE #SAD309 has two side D rings and two floating D rings, giving it four attach-ment points, too. Some users like the increased maneuverability and freedom of movement that a floating D ring design allows. Like the saddle above, it also has five nylon loops around the outside of the belt, and two brass snap clips.
#SAD304 Split Suspension
#1371SaddleBackView #1371 Saddle Front View
#1342 Climbing Belt
#SAD309 Two Floating Dees
Description MADSEN’S
#SAD304 Split Suspension 15900
#SAD309 Two Floating Dee Rings 16900
WideBackSaddle MADSEN’S
#1371 Split Suspension Saddle 13900
#1342 Climbing Belt 16500
Waist Sizing:Small 30 - 34 Medium 34 - 40Large 40 - 44 XLarge 44 - 48
Waist Sizing:Small 28 - 32Medium 32 - 36Large 36 - 40XLarge 40 - 44
The BUCKINGHAM SADDLE provides superior comfort and support. The back support is 5 1/2” high and constructed of rubberized belting material lined with soft top-grain leather. The seat is con-structed of 3” wide cotton webbing that is reinforced with 1 3/4” nylon that is also lined in top-grade leather.
The BUCKINGHAM CLIMBING BELT has a 5" leather pad and nylon body belt, but does not have leg straps.
Do you need something special or gear you don't see listed? Call us. We carry more climbing gear and equip-ment in our shop than what is shown.
OLD STYLE FLIP-LINE is 7/8" Manila rope with a steel-core. Because of its large diameter, some climbers still prefer this when working in trees with heavy bark.
Flip-Line MADSEN’S
#FLI129 15' 10100
#FLI130 18' 11000
Old Style Manila Flip-Line
Master Page l
“The Pro’s Choice” 19
Safety Items l
“The Pro’s Choice” 19
Faller's Whistle
Bee Bopper II
Folding Stretcher & Stretcher Kit
Blood Stopper Bandage
The STRETCHER folds for easy storage in a box or crew bus. When needed, it locks open in a rigid position. It features a sturdy frame covered with durable vinyl fabric. It is available as part of a kit or sold separately. The kit includes a case, stretcher, first aid kit, wool blanket, disposable blanket, and restraint straps.
List Price 575
MADSEN’S 435
Pouch for Two 895
MADSEN’S PRICE#340-FSM Stretcher Only 18950
#340-STK3 Stretcher Kit w/Box 43950
Call for information and prices on stretcher kits not listed.
The WHISTLE is brightly colored and comes with its own neck string. It gives you “sound communication” in high noise areas.
BEE BOPPER II quickly kills wasps, hornets, yellow jackets, and bees. The spray will reach a nest mass 10" in diame-ter when fired from a distance of 20'. #61011
A BLOOD STOPPER BANDAGE is an important safety item for chain saw operators. This absorbent bandage helps control bleeding from a chain saw cut. It also helps keep a cut clean during transport.
List 395
MADSEN’S 1-11 295
12+ 245
Insect RepellentINSECT REPELLENT repels mosqui-toes, chiggers, ticks, deer flies, stable flies, gnats, and fleas on exposed skin. Protection lasts up to ten hours. 2 oz pump- spray bottle. Item# 61606List 895
MADSEN’S 1-11 595
12+ 550
List 915
MADSEN’S 1-11 599
12+ 539
It comes sealed in a plastic container and has long fabric ties for firm attachment to the injured area.
This is powerful stuff - it contains 98% DEET!
Master Page
Call (360)736-1336 24 hours20
Hearing Protection
Call (360)736-1336 24 hours20
PlugsEAR plugs are made of polymer foam and are com-fortable and reusable. To use, just roll each up with your thumb and finger, and insert into each ear. They expand in your ear canals and block out noise.
We carry both styles shown below. Please specify when ordering.
We also carry EAR’s FX style shown below. They are made of soft foam and rated at 33 dB.
Taper Fit Style - Bullet Shape
UltraFit Ear PlugsULTRAFIT EAR plugs provide optimum protec-tion and superior comfort. These ear plugs feature a triple-flange design with "swept back" flanges that are ultra-thin and flexible. They come corded and are available with or without a storage case.
Silencio Ear PlugsSILENCIO EAR plugs are premolded of soft vinyl. Many wearers prefer these over foam type ear plugs because of ease of use. They also contain an air cushion that provides protection and comfort. These plugs last a long time and can be used over and over. They are corded to prevent loss and come with a small plastic storage box.
List 360
MADSEN’S
1-11 295
12-99 275
100+ 245
List 29¢MADSEN’S 1-11 25¢12-199 20¢200+ 16¢
MADSEN’S Box of 200
$3200
That’s only 16¢ a pair!
List 295
MADSEN’S 1-11 225
12-99 195
100+ 185
Classic Style - Cylindrical Shape
Soft FX Style
EAR MUFFS have soft vinyl, foam-filled ear seals that completely enclose the ears, cushioning and sealing the plastic ear cups against the wearer’s head. Muffs are adjustable for different sized heads.
Two styles are available: The muff rated at 25 dB does not offer as much protection as the one rated at 30 dB.
HEADBAND EAR PLUGS enter your ear canal to protect. They will fit most small to large sized heads. They also come with a spare set of replace-ment ear plugs. NRR rating 27.
List 755
MADSEN’S 1-5 595
6+ 550
Add 50¢ for plugs with case.
Headband Ear Plugs
Item# 330-9100
Item# 330-1261
Item# 330-1001 Item# 330-1219
Item# Rating List MADSEN'S 4+
330-2471 25 dB 1695 1195 1095
330-3006 30 dB 2695 1895 1795
Item# 330-321
Ear Muffs
Master Page l
“The Pro’s Choice” 21
First Aid l
“The Pro’s Choice” 21
•ShowsKitIncludes Description List MADSEN’S 10 Unit 24 Unit Price PRICE X #6810-0WA 10unitfirstaidkit(complete) 4595 3695
X #6824-0WA 24unitfirstaidkit(complete) 8595 6895
X X #121-055 CPRmask,wipes,gloves(1ea) 1695 1195
X X #028-001 Curad 1" x 3" (16 ea) 230 170
X X #020-550 Scissor&tweezers 295 225
X X #021-645MD Wound wipe (2 ea) 315 235
X X #020-630 Gauze bandage 2" x 6 yd (2 ea) 435 325
X X #020-374 Tri bandage 40" compress 345 255
X #020-510 Gauze compress 24" x 72" 395 295
X #020-640 Gauze compress 18" x 36" 395 295
X X #020-584 Gauze pads 4" x 4" (4 ea) 225 165
X #35-144TC Bandage compress 4' w/telfa 345 255
X #020-445 Adhesive tape 1/2" X 2.5 yd 215 160
X #10-5020 Elastic ace bandage 2" X 5 yd 175 130
X #020-380 Wire splint 1 3/4" X 30" 595 445
X #020-618 Emergency"space"blanket 645 485
X #83-134SS Nox-A-Sting (10 ea) 585 435
X X Emergency instruction chart
First Aid Kits & RefillsNORTH first aid kits come in sturdy metal containers. Each com-ponent is boxed, wrapped, and marked for easy use and replace-ment. The contents of kits are listed in the left-hand column below. The 24 unit kit meets federal OSHA 1910.266 requirements for small logging or cutting work sites.
For larger sites, your state safety organization or employer may require more kits and additional items. For specific requirements consult the agency with authority for your job site.
No-Fog Lens CleanerNO-FOG LENS CLEANER is simple to use. Just squirt it on your lenses, then wipe them clean with a soft cloth. It works on all types of glasses.
Users also report that this helps reduce fogging when used on windows in logging equipment that lacks a heater/defroster.
List 495
MADSEN’S 1-11 395
12+ 350
Master Page
Call (360)736-1336 24 hours22
List 1195
MADSEN’S 1-9 995
10+ 895
Eye Protection
Call (360)736-1336 24 hours22
These SAFETY GLASSES have magnification built into the lower portion of the lens -- look ahead and the lens is clear. Magnification available: +1.0, +1.5, +2.0, +2.5, or +3.0. We also carry these with dark sun-glass style lenses: +1.5, +2.0, or +2.5. Item #CH1.
GENESIS safety glasses feature a wrap-around lens design that offers great peripheral vision and protection. Meets military ballistic impact require-ments. Available with clear or espresso colored lenses. Both the clear and espresso lens is treated with an anti-fog coating.
BANDIT safety glasses have a sporty and contem-porary look. They also have adjustable temple pieces for a custom fit. The lenses are replaceable and available in clear or espresso color to reduce brightness. The clear lenses are coated with Uvex's anti-fog coating.
Bandit Safety Glasses
Safety Glasses with Magnifying Inserts
Genesis Safety Glasses
Extra Lens 450
Safety Cord 395
With Mirror Lens Add $2
Clear Lens#330-1620Espresso Lens#330-1623
Clear Lens#330-3200Espresso Lens#330-3241
List 900
MADSEN’S 1-9 895
10+ 795
List 1495
MADSEN’S 1-9 995
10+ 895
Not sure what to get? Most people prefer the lower magnifications.
Temples#330-675Strapped#330-685
RADIAN mesh goggles feature fog-free eye pro-tection. They are good for wearing in rainy condi-tions or in warm working conditions where per-spiration fogs conventional safety glasses. They are available as glasses with black temples or with an elastic strap in a goggle style.
Radian Mesh Glasses/Goggles
List 865
MADSEN’S 1-9 1235
10+ 1175
Master Page l
“The Pro’s Choice” 23
List 995
MADSEN’S 1-9 895
10+ 795
Eye Protection l
“The Pro’s Choice” 23
BUG-EYE goggles are comfortable, durable and fog-free. No amount of rain or perspiration causes the screen to fog up. The bug-eye design also offers good side visibility. They have an adjustable elastic back strap.
Bug-Eye Safety Goggles
List 1825
MADSEN’S 1-5 1250
6+ 1150
NEMESIS safety glasses feature a large lens design that wraps-around your eyes for exceptional pro-tection and visibility. The glasses also feature 99.9% UV light protection and an anti-fog coating. Available with: Clear, Smoke, or Blue lenses.
Nemesis Safety Glasses
SIGHT SHIELD goggles have tough polycarbon-ate frames and adjustable back straps. They also have stainless steel wire-mesh lenses for fog free protection. We carry them in two different mesh sizes: 20 and 30. The 30 is the finest mesh. The 20 is brighter and less likely to hold water drops. Please specify when ordering.
Sight Shield Mesh Goggles
List 2495
MADSEN’S 1-5 1995
6+ 1795
VENGEANCE safety glasses feature polarized lenses for comfort and protection when working in a bright and sunny conditions. They are great for equipment operation or truck driving. In fact, these stylish glasses might become your new favorite all-around sun glasses. They are avail-able with black frames and smoke colored lenses or with brown frames and brown lenses.
Vengeance Polarized Glasses
List 2495
MADSEN’S 1-9 1995
10+ 1895
20 Mesh#330-SS2030 Mesh#330-SS30
Item# 330-726
SmokeLens#330-VG1PBrown Lens#330-VG3P
Clear Lens#330-235Blue Lens#330-225SmokeLens#330-245
Master Page
Call (360)736-1336 24 hours24
Ear & Head Protection
Call (360)736-1336 24 hours24
Chain Saw Safety CapThe CHAIN SAW SAFETY CAP is a safety system. It pro-tects your head, eyes, and ears - all with one device. The cap is made of UV stabilized ABS plastic. The hinged visor supports a mesh face-shield that provides protection from wood chips and other small flying debris. The ear muffs protect the ears plus they help keep the cap in place. The muffs and face-shield can be flipped up when not in use. We carry two styles of these safety caps, the orange version shown left and a bright-green version, not shown.
Replace that old worn and dented aluminum hat with one that has the look, fit, and feel of the classic full brimmed hard hat, but meets today’s ANSI Z89.1 specs. Like the old hat, it comes with a replaceable four-point suspension, but this one has a twist-adjust feature for quick and easy fit. The main difference between this and the classic hat is a new safety panel riveted inside in the top of the crown. This improves protection with little additional weight.
Aluminum Full Brimmed Hard Hat
List 5295
MADSEN’S 1-3 4995
4+ 4795
Natural Silver 5995
Bright Orange 6695
Lime Green 6695
Replacement Suspension 695
Replacement Ear Muffs 1995
Replacement Screen with Mount 1395
Replacement Suspension 995
Pictured left is a natural “silver”hat. Wealsostockthemwith a bright orange,lime green, red, or yellowfinish.
Screen Only 1245
Screen Face ShieldThe SCREEN FACE SHIELD protects your eyes without the discomfort of wearing gog-gles. It hooks around the edge of most full brimmed hard hats. The screen is mounted on a hinge assembly and will tip up out of your way when not in use.
List 2500
MADSEN’S 1-11 2395
12+ 2295
Hi-Viz Orange - Item# 330-392Tasco Hi-Viz Green - Item# 330-6030
Item# 330-SKB
Master Page l
“The Pro’s Choice” 25
Hats & Caps l
“The Pro’s Choice” 25
Sweat-Band for Hard Hat
Polyethylene Hat or Cap
SuspensionWe still have STAZ-ON SUSPENSION for Mac T hard hats. This suspension has four mounting points and easily snaps in place.
The HARD HAT SWEAT-BAND makes wearing a hard hat on a hot day much more comfortable. The sweat-band is made of soft and absorbant terry-knit fabric, which absorbs sweat. This helps keep sweat out of your eyes when working in warm weather. The sweat-band is universal fit and will snap around most any brand of hard hat suspension system. Note: The suspension system shown is not included in the price of the sweat-band. Item# 330-622.
Winter Helmet LinerThe HELMET LINER is worn under a hard hat and provides warmth when working in cold conditions. The portion that covers the neck and ears is knit-ted. It attaches to the top with a zipper for easy removal when warm.
List 1195
MADSEN’S 1-5 1095
6+ 995
List 695
MADSEN’S 1-5 395
6+ 350
List 1995
MADSEN’S 1-5 1795
6+ 1595
List 1595
MADSEN’S
1-5 1495
6+ 1395
List 1595
MADSEN’S
1-5 1495
6+ 1395
Replacement Standard Suspension 995
Replacement Ratchet Suspension 1095
The V-GARD CAP has a small visor and the hat is full brimmed like the popular aluminum hard hat. Both are made of fluorescent red/orange lightweight poly-ethylene. This material is non-conductive and won't dent like aluminum hats. The hat is also available in several other colors.
Caps come with ratchet suspension and hats with standard suspension. When ordering replacement suspension, please specify. The suspensions are interchange-able and either will work in the hat or cap.
Item# 330-4231 Item# 330-282
Item# 330-8146Item# 330-9360
Master Page
Call (360)736-1336 24 hours26
Leg Protection
Call (360)736-1336 24 hours26
PRO CHAPS are worn outside regular work pants and are held in place by Fastex® buckles. These buckles are on the waist belt and leg straps. They are light, strong, and easy to release. Many chain saw operators favor this type of cut protection because it can be put-on and taken-off as needed. This is convenient on jobs where a saw is used occa-sionally. This style of cut protection is also good for use at saw mills and on other job sites where it is beneficial to be able to share a single garment among several users on other shifts or crews.
Labonville Pro Chaps meet the February '95 OSHA standards for leg protection. They have 6-plys of cut protective fabric, a polyester/Kevlar® knit developed for Labonville (see the picture below). The chap's shell is made from 1000 denier Cordura nylon, which is tough and stain resistant. This is used on both the front and back, so the chaps are reversible.
Ask about Labonville's Fire Reisistant Chaps that feature additional flame and ember protection.
What size chaps should you buy?Chaps are are not sized like pants, where length is determined by the length of your inseam. Chaps are sized by overall length. To determine the cor-rect size, measure the distance from your belt to your instep. Chaps that are shorter will leave areas of the leg exposed and unprotected. Chaps that are too long can impede movement and cause tripping. When wearing boots with built-in cut protection, the chaps can be fitted to overlap as shown above. Before buying chaps, also check with your employer and the safety agency with authority on your job site for details on the safety apparel you need. If you require an item not listed, please call.
When should chaps be replaced?When chaps are cut, it severs fibers in the cut resistant material. Even a small cut greatly reduces protective qualities. If your chaps are cut, they've done their job. Don't patch 'em - replace 'em. Over time chaps also get soaked with gas, oil, and sweat. This also reduces their cut protective qualities. They can be laundered, but this does not completely restore the level of protection they originally offered.
Overall Part MADSEN'S Length Number 1-3 4+ ea
Short - 28" #850KPS 6495 6295
Regular - 32" #850KPR 6795 6595
Long - 36" #850KPL 7495 7295
XL - 40" #850KPX 7695 7495
XXL - 44" #850KPXX 8595 8395
Add $1500 for Fire Resistant Style
Labonville Cut Protective Chaps
Shown is a chap we cut during a test. Note the loose fibers that have snagged the saw's chain and slowed it. Fibers also traveled into the saw's s ide cover, slowing the drive mechanism.
T h e s e c h a p s a re m a d e b y Labonville, a USA company that has been making cut protective gar-ment for over twenty-five years.
Master Page l
“The Pro’s Choice” 27
Leg Protection l
“The Pro’s Choice” 27
View of Snap-In Kevlar®/Polyester Pad Protection on the Inside of Pants
ORIGINAL SNAP-IN SAFETY PADS are worn on the inside of your pants. They require special pants fitted with upper snaps and knee-pockets (see below) or can be sewn into regular work jeans.
Many timber fallers prefer this type of leg protection because it allows more freedom of movement than chaps worn on the out-side. With outside chaps, straps and buck-les add weight and can get hung up on brush. Inside chaps are lighter and require no straps or buckles because they are held in place by the pants.
Like outside chaps, SAFETY PADS are not represented as shields against damage, but as an aid to help prevent more severe damage in extreme cases.
What size safety pads do you wear?• Regular length is for people up to about 6'. • Tall is for long legged people or over 6'. Note: Safety pads should extend from the waist to the top of the foot.
Knee-sleeves and snaps have been added to these logger's jeans so they can be used with Labonville snap-in safety pads. If the pants are cut into, the knee sleeves help hold the safety pads in place to protect the legs. The snaps also make it easy to remove the pads for laundering or for swapping into another pair of jeans.
Cut away side view of pad in safety pants. Note sleeve in knee area andsnaps on top.
Shown is the front view of a pair of single snap safety pads. Price includes both chaps.
Jeans for Snap-In Safety Pads
See the Madsen’s Jean listing on page 67 for sizes.
See page 52 for insu-lated winter pants and cool knit polyester summer pants that accept these cut resis-tant pads.
Labonville Snap-In Safety Pads
MADSEN’S 1-3 3995
4+ 3795
#SP500KPRRegular Length 4400 4095 3895
#SP500KPLTall Length 4600 4195 3995
Size List MADSEN'S 1-3 4+
Master Page
Call (360)736-1336 24 hours28
Faller's Pants & Cold Weather Wear
Call (360)736-1336 24 hours28
The WOOL FALLER'S JACKET is made of red/black plaid Woolrich® fabric. This fabric is 85% wool and 15% nylon. For wind and water repel-lency, a black nylon "yoke" covers the shoulder, chest, and upper back. The jacket features a zipper front, snapping wrist cuffs, two chest pock-ets, and two side slit pockets. It can be worn as a light jacket or a heavy shirt. Sizes: M to 3XL.
The CAMO FLEECE JACKET can be worn as a light jacket or a heavy shirt. It is also good for lay-ering under a rain coat or a heavy jacket for cold weather wear. It is made of 100% polyester fleece. The garment features elastic cuffs, an adjustable elastic waistband, and zipper closures on side pockets. It also has a full-length zipper which zips to the top of the collar for a snug fit around the neck. Sizes: M to 3XL.
Faller’s Pants
The WINTER faller's pants are made of water repellent black nylon and insulated with 3M Thinsulate. This makes them perfect for cold and drizzly days.
The SUMMER faller's pants are made of loose knit green polyester. This durable fabric is very cool in hot weather. Suspender buttons are sewn inside the waist of both types of faller's pants.
See our safety chap page for prices and infor-mation on the LABONVILLE KEVLAR safety chap pad system.
Wool Faller’s Jacket Camo Fleece Jacket
Winter Pants Waist Sizes: 30,32,34,36,38,&40 7295: Size 42 add $6.Summer Pants Waist Sizes: 30,32,34,36,38,&40 4995
Size 42 add $4.
2XL&3XLadd $10. 2XL add $4.
List 11990
MADSEN’S 1-3 10995
4+ 9995
List 2600
MADSEN’S 1-3 2195
4+ 2095
Winter#WN600P
Summer#SN650P
Style# S700
Type MADSEN'S
FALLER'S PANTS accept Labonville snap-in safety pads for chain saw cut protection and come in two types:
Style# CWNF01
Master Page l
“The Pro’s Choice” 29
Cold Weather Wear l
“The Pro’s Choice” 29
Wool PantsWOOL PANTS are great for cold-weather work or rec-reation. They are made from dark-green 24 oz felted fabric, which contains 75% recycled wool. These pants feature a zipper front with button closure, and six inside suspender buttons. They also have belt loops. They are available with or without cargo pockets. Both are available in waist size: 32" - 40". The inseam is 33" only. They are made in Canada.
List 10000
MADSEN’S 1-3 8495
4+ 7995
Style# 234
List 8000
MADSEN’S 1-3 6495
4+ 5995
Style# 214
The SANDSTONE DETROIT JACKET has a micro-sanded and garment washed shell for softness and comfort. Other fea-tures include triple-stitched main seams, snap-adjustable waist and cuffs, and a zipper front. It also has a pocket on the left chest and two front welt pockets. This is a great coat for both work or casual wear.
Style: J97OuterFabric:CottonDuckIns:BlanketBody&QuiltedSleevesColor:Black,Gravel,Brown,orMossSizes: S - 5XLList Price: Up to 10000
MADSEN’S 7999
Add$5forBig&Tallsizes.
Sandstone Detroit Jacket
BLANKET LINED JACKETS are made of durable 12 oz cotton duck fabric. This fabric is tightly woven which results in garments that are tough and snag resistant. It’s also treated with a water repellent coating that can be retreated after wash-ing. These jackets also feature a zipper front and two snap adjustable waist tabs. A hood is optional.
Style: J001OuterFabric:CottonDuckInsulation:BlanketColor:BrownorBlackSizes: S -5XList Price: Up to 8000
MADSEN’S 6199
Add$5forTalls&3X-5XOptional hood is $1699.
Blanket Lined Jacket
Master Page
Call (360)736-1336 24 hours30
High Visibility Safety Wear
Call (360)736-1336 24 hours30
Safety Sweat ShirtsSAFETY SWEAT SHIRTS are avail-a b l e w i t h o r without hoods. T h e b o d y i s made of orange p o l y / c o t t o n blend fleece with three high-visi-b i l i t y y e l l o w stripes on the chest and back.
The HOODED PULLOVER SWEAT SHIRT has an orange polyester blend fleece body with 3M reflective stripes on the chest and back. The lower portion is made of black fleece to mask soiling. Item# 230-755328.
Sweatshirt List MADSEN'S 4+
CrewNeck 2195 1995 1795
Hooded 2995 2795 2550
Callforpriceof2X,3X,&4X.
The SAFETY T-SHIRT fea-t u r e s t h r e e high-visibility yellow stripes across the chest and back. Each stripe is 2” tall and 12” wide. T-Shirt fabric colors: Orange or Black.
This is an inexpensive and comfortable safety solution for job sites where visibility is important. The body is 100% cotton knit, so it is comfortable even in warm working conditions.
Safety T-Shirt
List 1495
MADSEN’S M-XL 1195
2XL-4XL 1395
Askaboutkid'ssizes
Sweat Shirt
List To 4995
MADSEN’S M-2XL 3995
The HI-VIZ T-SHIRT is made of moisture-wicking mesh fabric. It is available in lime-yellow or orange and has silver reflective stripes. It also has a left chest pocket. This garment meets ANSI class 2 specs. Sizes: S - 5X.
Hi-Viz T-Shirts
The shirt is rated ANSI class III.
Sweatshirt List MADSEN'S 4+
Short Sleeve 1695 1295 1195
Long Sleeve 2695 1995 1850
Callforpriceof2X,3X,&4X.
Master Page l
“The Pro’s Choice” 31
High Visibility Safety Wear l
“The Pro’s Choice” 31
The 1/4 ZIP SAFETY SWEAT SHIRT is available in bright orange or lime/yellow. It is made of polyester blend fleece and features a lower por-tion of black fleece to mask soiling. 3M reflective stripes are sewn on the chest and back. The shirt is rated ANSI class III.
Style# 280-39950
List 2595
MADSEN’S 1-5 1995
6+ 1895
List 995
MADSEN’S 1-5 895
6+ 795
The HI-VIZ SAFETY VEST is made of bright-orange 100% polyester fabric. It also has two-tone reflective stripes sewn on the shoulders and waist. The vest also features a zipper closure and eight handy pockets.
Style# 230-SV622
Hi-Viz Safety Vests
List 8500
MADSEN’S 1-3 7195
4+ 6495
Style# 280-SV2Z
The 1/4 ZIP SAFETY SWEAT SHIRT is popular with loggers and timber fallers because it is simi-lar to a 1/4 zip hickory shirt. This garment is made of orange poly/cotton blend fleece and fea-tures three high-visibility yellow stripes on the chest and back. Item# 230-18800
List To 3100
MADSEN’S M-XL 2595
1/4 Zip Safety Sweat Shirt
The HI-VIS SAFETY VEST is made of bright-orange poly-ester and has 2" sewn-on reflective bands. It also fea-tures a zipper front closure and a left-chest pocket for convenience. Color: Orange. Sizes: M -5XL.
I f you need pockets , the SURVEYOR’S VEST has them, including a special sealed pouch for a phone and a large zip pocket across the back. The orange vest features sewn-on reflective bands in the front and back. Sizes: M - 3X.
List To 3795
MADSEN’S M-4XL 3195
2X-3X add $1.
2X-3X add $2.
Master Page
Call (360)736-1336 24 hours32
High Visibility Rain Wear
Call (360)736-1336 24 hours32
Hi-Viz Rain Wear6400 VIKING HI-VIZ 3 in 1 JACKET is a class 2 level 2 safety garment. When you order one, you get a water-proof/breathable shell that can be worn alone or with the fleece inner-jacket that is zipped into it and serves as its lining. When the shell is not needed, the fleece liner can be worn as a light jacket. It is class 2 compliant by itself. This makes for a garment system that is comfortable in nearly any weather conditions. Sizes: S - 3XL.
6330 VIKING HI-VIZ JACKET is a waterproof/breathable shell that is class 2 level 2 compliant.
6330 VIKING HI-VIZ BIB are waterproof/breathable rain pants and serve as a mate for either coat above.
Need to be class 3 compliant? When a coat and bib are worn together, the suit becomes CSA class 3 compliant.
The NEESE SAFETY JACKET is a bomber style 3 in 1 jacket. It offers high-visibility in moderate to cold weather conditions. It fea-tures a waterproof hi-viz lime shell and a removable polyester fleece liner, so both the shell and liner can be worn separately, or together making three ways to wear all or parts of this jacket.
The outer has Scotchlite reflective tape stripes and a cell phone/radio pocket on the upper left chest. The outer also features side-entry slash pockets and an inner breast pocket. Style# 9400.
Rainwear List MADSEN'S 4+
#6400J3in1Jacket 14500 12695 11495
#6330JJacket 10900 8395 7595
#6330P Pants 8000 5595 5095
Thepriceofsizes2XL&3XLareslightlyhigher.Please specify hi-viz yellow/green or hi-viz orange.
3 in 1 Jacket
Jacket
Shown right: This is the fleece liner that comes in thejacket.Itcanalsobeworn separately by itself or under another shell for lay-ering comfort.
Shown left: This is the completejacketwitharemovable fleece liner. Thejacketalsofeaturea removable hide-away hood.
Safety Jacket
Rainwear List MADSEN'S 4+
M-2XL 8600 6395 6095
3XL-5XL 7800 6995 6695
Master Page l
“The Pro’s Choice” 33
Rain Wear l
“The Pro’s Choice” 33
Our RAIN GEAR offers the best combination of pro-tection, durability, and comfort... all at a reasonable price. Jackets are full cut across the chest and back for extra arm mobility. This is important for swing-ing an axe or other upper-body activity. They also feature comfortable stand-up collars and storm-fronts. The full cut bibbed pants have heavy-duty elastic suspenders and tough non-corrosive nylon hardware. Seams are stitched and sealed with heat tape.
If you are BIG or TALL, you’ve probably had diffi-culty finding rain wear. We stock sizes up to 5XL in both Neoprene and Polyurethane coated nylon styles. If you need something bigger, up to 7XL is available, and for special needs, we can have rain wear custom made. If you need rain wear, we can help you.
Neoprene on NylonColor: Green.Sizes:S-XL,2Xadd$4.,3Xadd$8.,4Xadd$12.
Rain Coat 6700 5195 4795
Bibbed Pants 6700 5195 4795
Rain Hood 1390 1095 995
Polyurethane on NylonColor: GreenSizes:S-2XL,for3XL-4XLadd$3.
Rain Coat 4500 3495 3195
Bibbed Pants 4500 3495 3195
Rain Hood 1400 1195 1095
List MADSEN’S PRICE Description Piece Price 1-3 ea 4+ ea
NEOPRENE coated nylon is the traditional log-ger's rain gear we've carried for years. It is cut from a roomy pattern to allow arm and body movement. Better coatings and fabric allow it to be lighter and more flexible than the old neo-prene gear, but it is still tough and resistant to gas and oil. It is available in green only.
POLYURETHANE coated nylon rain gear is light and flexible, even when cold. It is cut from a roomy pattern similar to the gear above. The combination makes this gear easy to move in and comfortable.
Rain Gear
Water RepellentWATER REPELLENT is made by Sno-Seal and restores water-repel-lency to outerwear through the use of advanced polymers. It will not change how a fabric looks and is scent free when dry. It contains a fungicide to control odors and protect from mold or mildew. Can size is 10.5 ounces. Item# 310-1336.
List 800
MADSEN’S 1-5 695
6+ 650
#260-200
#260-250
#260-275
#260-600JG
#260-601TG
#260-600HG
Master Page
Call (360)736-1336 24 hours34 Call (360)736-1336 24 hours34
Rain Wear
GORE-TEX rain gear outperforms regular rain gear because it holds out rain while allowing perspiration to escape.
With this rain gear, you won’t finish the day drenched in sweat like you do when working in conventional rain gear. This rain gear also outperforms most Gore-Tex rain wear sold at sporting goods stores. It is made of industrial Gore-Tex fabric, which is heavier and more durable.
Gore-Tex®Color:GreenorBlack.Sizes:M-XL,forXXLadd$16.
Rain Coat 21200 16495 15795
Bibbed Pants 21800 16495 15795
Rain Hood 5500 4295 3995
List MADSEN’S PRICE Piece Price 1-3 ea 4+ ea
List MADSEN’S PRICE Piece Price 1-3 ea 4+ ea
Polyurethane on NylonColor:Black.Sizes:M-2XL,3X-4Xadd$6.
Rain Coat 7500 6495 6195
Bibbed Pants 7500 6495 6195
Rain Hood 1900 1295 1195
Breathable Gore-Tex® Rain Gear
TUFF BLACK RAIN GEAR is made of heavy-duty 420 denier nylon fabric coated with 8 oz polyure-thane waterproofing. The heavy-duty nylon is nearly impossible to tear and the polyurethane coat-ing resists abrasion and punctures.
Jackets feature a storm front with plated brass hard-ware. The overalls have a storm fly and heavy elas-tic suspenders. Both garments have sealed seams. If you are looking for tough rain gear, this is it!
Black Rain Gear
#260-900
#251SJ
#251BTF
#251HO
#260-950
Master Page l
“The Pro’s Choice” 35“The Pro’s Choice” 35
Rain Wear l
Thor Professional RainwearTHOR PROFESIONAL RAINWEAR is made of tough 300 denier rip-stop polyester canvas that is waterproof and breathable. The jacket features a storm front and European-style zipper. It also includes a snap-on hood. The bibs feature elastic suspenders with fast-snap buckles. The bibs also have handy cargo-pockets and zip-to-knee side-zip-pers for easy on and off over work boots.
Breathable Polyester CanvasColor:Black.Sizes:M-XL,2XL&3XLadd$7.
Rain Coat 13000 9395 8495
Bibbed Pants 12200 8595 7795
List MADSEN’S PRICE Piece Price 1-3 ea 4+ ea
#3910JB
#3910PB
Mayne CoatStyle: 101076Sizes: S - 4XL
Mayne BibsStyle: 101075Sizes: S - 4XL
Coat or BibsList Price: Up to 6000
MADSEN’S 3999
Add $3 for Big sizes.
PVC BIBS bibs have adjustable suspenders with snap-closures. They also have an inside bib pocket with a zipper-closure. The seat is reinforced and the knee area is reinforced with a chap-style double-front.
PVC COAT has a storm-channel placket with snap-closures. It also has three pockets, neo-prene inner sleeve cuffs, and reinforced elbows. A detachable hood is included.
PVC RAIN GEAR is made of 50-mm polyester backed PVC. Both the coat and pants are waterproof and wind resistant. All seams are electrically welded and major seams are sewn and welded. This rain gear is value priced, yet very durable. Color: Green.
PVC Rain Gear
Master Page
Call (360)736-1336 24 hours36
Rain Wear
Call (360)736-1336 24 hours36
Tin Coat - Double: M to 2XL 21000 Call for Price
Tin Pants - Double: 30" to 44" Waist 18200 Call for Price
Tin Pants - Single: 30" to 44" Waist 17000 Call for Price
Type List MADSEN'S
Tin WearFILSON tin wear is popular with loggers and others who do hard physical work in rainy weather. The wax treatment “repels” water, yet the canvas fabric breathes to vent perspiration. This helps keep the wearer from becoming drenched in sweat, a common discomfort with conventional “water proof” rain gear. Also, its cotton canvas construction makes it some of our most durable wet weather wear.
TIN PANTS are available in two styles: Double tin pants have two layers of fabric that extend from the waist to below each knee for extra durability. They are available in tan or green. Single tin pants have only one layer and are available in tan only. Both tin pants have four deep pockets with storm flaps on the two rear ones. They are also bar tacked at all strain points and riveted steel buttons are used on the fly and suspender anchors.
The DOUBLE LOGGER COAT is constructed with two layers of fabric that extend over the shoulders and down each arm. The coat also features a comfortable full cut for easier arm movement. The front closure, flaps, and cuffs are reinforced. This is an extremely durable rain coat that will hold up in challenging work conditions.
The TIN PACKER HAT is made of fabric similar to what is used to make tin pants. It offers excellent protection from all types of weather, and like the tin pants, it is extremely durable. Item #60015-TN.
The SHELTER CLOTH PACKER HAT is cut and shaped from the same pattern as the Tin Packer Hat, but made with shelter cloth, a finer woven oil finished fabric. Both hats are the same price, so please specify size and type when ordering. Item #60017-OT.
Filson HatsHat SizeHead Measure
S M L XL XXL63/4-67/8 7-71/8 71/4 -73/8 71/2 -75/8 73/4-77/8
211/8 -211/2” 217/8 -221/4” 225/8 -23” 231/2 -237/8” 241/4-255/8”
Extra tins of wax finish for tin wear are $895 ea.
“Packer” Hats
List 5500
MADSEN’S Call for Price
Master Page l
“The Pro’s Choice” 37
Caps & Hats l
“The Pro’s Choice” 37
List 2595
MADSEN’S 1-5 2095
6+ 1895
MADSEN’S Twill Cap 795
Madsen’s Caps
Wool Crusher Hat
MADSEN’S CAPS are made of brushed cotton twill and come in several colors. Most caps have a dark bill which helps hide dirty finger prints. All caps also features a high-stitch-count embroidery on the crown. If you want a ball cap that looks like something a timber faller would wear, this is it.
This is a genuine Effanem wool crusher hat. It is made in the USA of 100% wool. In the days before hard hats, this was commonly worn by woodsmen in the Northwest. Old logging photos show these on countless logger’s and saw men. Even though hard hats have replaced this as a work hat, it remains a favorite of outdoorsmen everywhere.
Wool Crushers are available in: S - XLColors are: Red, Flame Orange, & Green
Madsen’s caps are priced below cost as a way of saying “Thanks” for your business -- and for advertising for us. When you recommend Madsen's to your friends and co-workers, we appreciate it.
CARHARTT KNIT stocking caps are made of jersey knit acrylic. While not as warm as wool, they don’t have the scratchy feel. The caps will stretch to fit any size head. Colors are: Black, Charcoal, or Navy.
CARHARTT HELMET-LINER MASK is made of 92% poly-ester and 8% spandex. It offers full face protection that extends below the neckline. The mask portion can easily be pulled down when needed.
Type Size List MADSEN'S
#A18 Acrylic 1000 799
#A164 Billed Acrylic 1200 999
#A267 Full Face 2000 1699
Item# A18Item# A164
Knit Caps
Item# A267
Master Page
Call (360)736-1336 24 hours38
Cold Weather Wear
Call (360)736-1336 24 hours38
Traditional Red Cotton Union Suit
List To 2800
MADSEN’S 2195
Heavyweight Wool Underwear
WOOL BLEND THERMAL underwear is a two layer knit blend. The outer layer is 70% polyester and 30% merino wool. The inner layer is 100% Hydropur. This gives you the comfort of Hydropur next to your skin, the warmth of wool, and the wearability of polyester. Sizes of tops or bottoms: S to 3XL Color: Grey. Style# 975 DR/LS.
Wool Blend Underwear
HEAVYWEIGHT WOOL UNDERWEAR is standard equipment for winter work in Alaska and the Pacific Northwest. Its rib knit weave is absorbent and warm, even when wet. It also has flat locked seams for extra wear. The union suit design has a trap door in the seat, a button front, and snug fitting cuffs. Made in Canada.
The RED UNION SUIT is made of 100% rib-knit cotton. This smooth knit makes it warm and com-fortable to wear. It also features a button front placket and reinforced stitching on all seams. And yes, it still has a vertical seat flap for... you know. Sizes: S - 3XL & LT - 2XT. Style# 865US.
Size List MADSEN'S
#1300 Union Suit S - XL 9500 7995
#1300 Union Suit 2XL 11000 9495
Askaboutquantityprices.
Add$2for3XL&Tall sizes.
Top or Bottom per piece:List Price 2500
MADSEN’S 1695
Add$2forBig&Tallsizes.
Master Page l
“The Pro’s Choice” 39
Cold Weather Wear l
“The Pro’s Choice” 39
Additional savings are available for purchases of four or more. Please call for more information.
Work-Dry Underwear
Top or Bottom per pieceList Price 1800
MADSEN’S 1295
Add $1 for Big Sizes
Top or Bottom per pieceList Price 1600
MADSEN’S 1195
Add$1forBigs&Talls.
Top or Bottom per pieceList Price 1400
MADSEN’S 895
Add$2forBigs&Talls.
MAXIMUM WEIGHT THERMAL UNDERWEAR is made of 9.1 oz. waffle-knit fabric and is rated for extremely cold tem-peratures. The waffle-knit is a blend of 50% cotton and 50% polyester. This traps a layer of air and body heat air near your skin, insulating you from the cold. Style# 822 DR/LS.
Ice-Tex HydroPur Underwear
WORK-DRY THERMAL UNDERWEAR is made of 5.5 oz. polypropylene rib-knit, so it is lightweight, but still warm. Polypropylene wicks moisture, keeping you warm and dry. This underwear also features rib cuffs on the top and an elas-tic waistband on the bottoms. Tops are Style# 21LS. Bottoms are Style# 21DR.
Max Cold Underwear
ICE-TEX HYDROPUR UNDERWEAR is dual-faced. Against your skin is fleeced HydroPur. HydroPur fiber has the high-est rate of absorbancy and highest rate of evaporation of any performance fiber on the market. Silver ions imbedded in its fiber during the polymer stage also give the garment a level of odor control. outside is combed cotton. Tops are Style# 286LS. Bottoms are Style# 286DR.
Note: Polypropylene under-wear is not a good choice if you are going to be welding while wearing it or around anything that may cause it to melt.
This is high-quality well con-structed underwear. Its top fea-tures a rib-knit neck and cuffs. The bottom has an elastic waist band.
Master Page
Call (360)736-1336 24 hours40 Call (360)736-1336 24 hours40
Work Pants
These BIBS are made of Carhartt's famous brown duck canvas and are not insulated or lined. Their many features include roomy pockets, a high back, elastic suspenders, and triple-stitched main seams. The knee and upper leg have an extra layer of fabric for pro-tection and wear. Ask us about knee pads that can be placed behind this fabric.
Style: R01OuterFabric:CottonDuckColor: Brown Sizes: Waist 32" - 42"Legs:30",32",or34"List Price: 7500
MADSEN’S 5999
Brown Duck BibsDENIM BIBS have a high back and adjustable suspend-ers. They also have a double compartment bib pocket, roomy rear pockets, and a zipper fly. Stress points are riveted and bar tacked. These bibs are well made and long wearing. They are cut from a roomy pattern for comfort and easy movement when working.
We carry two styles of unlined cov-eralls: One is made from cotton twill, the other from a cotton/poly blend. The cotton coveralls are comfortable and the best choice if you do any welding. The style made from blue cotton/polyester blend is what our techs wear at Madsen's. These wash well, wear well, and look good, even when they are slightly soiled. They also have leg zippers, which makes it easy to get them over your boots.
Denim Bibs Mechanic's Coveralls
Style: 273.41Outer Fabric: Blue DenimSizes: Waist 34" - 48"Lengths:30",32",&34"legs
MADSEN’S 2895
Add $3 for Sizes 48”.Buy 4+ and save $1 each.
Fabric: 7.5 Poly/Cotton or 10.5 oz Cotton TwillSizes: S - 2XLLengths: Regular List Price: 4695
MADSEN’S 3595
Buy 4+ and save $3 each.
Bibs & Coveralls
Master Page l
“The Pro’s Choice” 41
Work Pants l
“The Pro’s Choice” 41
SOFT KNEES are made of high-density foam and slip in between the layers of fabric on most double front pants. This foam helps cushion knees on hard or rough surfaces and helps protect from heat or cold. These pads are less cumbersome than strap-on pads and are always there once they are installed in pants. Note: This foam is not chain saw cut protection. Item# 280-416.
Double Duck Dungarees
List Price 4800
MADSEN’S PRICEUnwashed (#B07) 3999
Prewashed (#B73) 3999
List 1900
MADSEN’S 1-5 1795
6+ 1595
BrownDuckInventory:28 x 30 28 x 32 29 x 30 29 x 32 30 x 30 30 x 32 31 x 30 31 x 32 31 x 3432 x 30 32 x 32 32 x 3433 x 30 33 x 32 33 x 3434 x 30 34 x 32 34 x 3436 x 30 36 x 32 36 x 3438 x 30 38 x 32 38 x 34 40 x 32 42 x 32
These don't have suspender buttons. See page 54 for add-on buttons.
List Price 5500
MADSEN’S PRICE
Unwashed (#B01) 4499
Double Front Logger’s JeansDOUBLE FRONT LOGGER’S JEANS are made of durable 15 oz cotton denim. Features include a comfortable full cut, a side tool pocket, two full size back pockets, and triple stitched seams. The unwashed version is our best seller and it comes with six riveted sus-pender buttons. We also carry a prewashed version, which do not have suspender buttons.
Double Front Size Inventory:30 x 30 30 x 3231 x 30 31 x 32 31 x 3432 x 30 32 x 32 32 x 34 32 x 3633 x 30 33 x 32 33 x 34 33 x 3634 x 30 34 x 32 34 x 34 34 x 3636 x 30 36 x 32 36 x 34 36 x 3638 x 30 38 x 32 38 x 34 38 x 3640 x 30 40 x 32 40 x 3442 x 30 42 x 32 42 x 3444 x 30 44 x 32
Double front jeans offer longer wear in the area around the knees, but do not offer chain saw cut protection.
Soft Knees for Double Front Pants
DOUBLE DUCK DUNGAREES are made from the same cotton duck fabric used in Carhartt coats and overalls. This canvas-like material is tough, yet comfortable to wear. These pants are made even more durable by the extra layer of fabric around the knees where pants are often damaged. Colors: Brown, Black, or Moss.
Master Page
Call (360)736-1336 24 hours42
Work Pants
Call (360)736-1336 24 hours42
Logger’s Jeans
See page #51 for infor-mation on a version of these jeans that are mod-ified to accept Labonville Snap-In safety pads.
MADSEN'S LOGGER'S JEANS have the features loggers and timber fallers want. They are made of durable 14.75 oz cotton denim and cut from a gen-erous pattern. They have six riveted suspender but-tons, triple stitched side seams, and bar tack rein-forcements. The hardware includes a brass zipper, rivets on stress points, and a riveted button on the waist-band closure. The back pockets are sized extra deep so 10" and 12" faller ’s wedges won't fall out. They also have a watch pocket and a side tool pocket for your bar wrench or cell phone Best of all, these quality work pants are value priced.
Add$3WaistSize46"&48".
#1983M Single Front 2895 2595
#1993M Double Front 3295 2995
#1201111 Single Front 2795 2595
#1211111 Double Front 2995 2795
#1201212SFBlack 2895 2695
Big sizes are slightly higher.
Type MADSEN'S 1-3 ea 4+ ea
Type MADSEN'S 1-3 ea 4+ ea
Madsen’s Logger’s Jeans Size Inventory: 30 x 30 30 x 3232 x 29 32 x 30 32 x 32 32 x 34 32 x 3633 x 29 33 x 30 33 x 32 33 x 3434 x 29 34 x 30 34 x 32 34 x 34 34 x 3636 x 29 36 x 30 36 x 32 36 x 34 36 x 3638 x 29 38 x 30 38 x 32 38 x 3440 x 29 40 x 30 40 x 32 40 x 3442 x 29 42 x 30 42 x 32 44 x 30 44 x 32 46 x 30 46 x 32 48 x 30 48 x 32
SizesinStock:30 x 30 30 x 32 31 x 30 31 x 32 32 x 30 32 x 32 32 x 3433 x 30 33 x 32 33 x 34 34 x 30 34 x 32 34 x 34 34 x 3636 x 30 36 x 32 36 x 34 34 x 3638 x 30 38 x 32 38 x 3440 x 30 40 x 3242 x 30 42 x 3244 x 30 44 x 3246 x 30 46 x 32
PRISON BLUES LOGGER'S JEANS are actually made by inmates at a penitentiary in Pendleton, Oregon. They are cut from a traditional log-ger's pattern and made of 100% 14.75 oz cotton denim for durability and comfort. They feature a zipper front, button closure, and suspender buttons. Their brand slogan is: "Made on the Inside to be Worn on the Outside."
Logger's Jeans
Note: Single Front Black Jeans are available in waist sizes 30" to 44" and in leg lengths of 30", 32", and 34".
Master Page l
“The Pro’s Choice” 43
Work Jeans l
“The Pro’s Choice” 43
Traditional Logger's JeansKEY LOGGER'S JEANS are "dun-garee" cut to be roomy and easy to work in. In fact, if you remember the old LEE logger's jean, the cut is very similar. They are made of durable 100% cotton denim and have heavy duty suspender but-tons, a zipper fly, full sized pockets, and rivets on stress points.
Note: Double Front Jeans are avail-able in waist sizes 30" to 42" and in leg lengths of 30" and 32".
SizesinStockforSingleFrontBlueJean: 30 x 30 30 x 32 32 x 30 32 x 32 32 x 34 34 x 29 34 x 30 34 x 32 34 x 34 34 x 3636 x 29 36 x 30 36 x 32 36 x 34 36 x 3638 x 29 38 x 30 38 x 32 38 x 34 38 x 3640 x 29 40 x 30 40 x 32 40 x 34 42 x 30 42 x 32 44 x 30 44 x 32 46 x 30 46 x 32 48 x 30 48 x 32 50 x 30 50 x 32 52 x 30 52 x 32
Prewashed Double Front Logger's Jeans
List 3300
MADSEN’S
1-3 2695
4+ 2495
Add $2 for Waist Sizes 44"-48".
Double Front Inventory:30 x 30 30 x 3232 x 30 32 x 32 32 x 3434 x 30 34 x 32 34 x 3436 x 30 36 x 32 36 x 3438 x 30 38 x 32 38 x 3440 x 30 40 x 32 40 x 3442 x 30 42 x 3244 x 30 44 x 32 46 x 32 48 x 32
PREWASHED DOUBLE FRONT LOGGER’S JEANS are made of 14.75 oz cotton denim. They feature a brass zipper, button closure on the waist band, a hammer loop, suspender buttons, and a side tool pocket that is large enough to hold a small cell phone. Style# 48011.45.
These good-looking jeans can be worn for casual wear, yet are durable enough for work. Their prewashed finish gives them the look and feel of old favorites right from the start.
Add$3WaistSize44"&52".
#446.41 Single Front 2095 1895
#447.41 Double Front 2495 2295
Type MADSEN'S 1-3 ea 4+ ea
Not sure of the size? Give a gift certificate.
Master Page
Call (360)736-1336 24 hours44
Work Pants
Call (360)736-1336 24 hours44
RELAXED FIT JEANS are made of 15 oz denim, yet have a soft feel and comfort-able fit. They are cut from a pattern that offers extra space in the seat and thighs. The also have straight legs. They come garment washed, which means they are processed in special machines after they are sewn to give them the look and feel of your favorite jeans on the first day you wear them. Style# B460-DPS.
SizesinStock:32 x 30 32 x 32 34 x 30 34 x 32 34 x 3435 x 30 35 x 32 36 x 30 36 x 32 36 x 3438 x 30 38 x 32 38 x 3440 x 30 40 x 32 42 x 32
List Price 4000
MADSEN’S 2999
Relaxed Fit Jeans
TRADITIONAL FIT JEANS are cut from a pattern where the waist sits slightly below the natural waist. The seat and thighs are cut slim. Leg openings easily fit over boots. These are a good choice for people with a slim build, who don't like a "relaxed fit" cut. Style# B480-DPS.
SizesinStock:32 x 30 32 x 32 32 x 3433 x 30 33 x 32 33 x 3434 x 30 34 x 32 34 x 34 34 x 3636 x 30 36 x 32 36 x 34 34 x 3638 x 30 38 x 32 38 x 3440 x 30 40 x 3242 x 30 42 x 32
List Price 4000
MADSEN’S 2999
Traditional Fit Jeans
Not sure of the size? Give a gift certificate.
Master Page l
“The Pro’s Choice” 45“The Pro’s Choice” 45
Work Jackets & Shirts l
Sizes:32 x 30 32 x 3233 x 30 33 x 3234 x 30 34 x 3236 x 30 36 x 3238 x 30 38 x 3240 x 30 40 x 3242 x 30 42 x 32
BEN'S BLACK LOGGER’S PANTS are an American classic. Made of 10.5 oz. fabric that is 50% cotton and 50% polyester, these full-cut pants are popular with logger’s, timber fallers, and truck drivers. Their features include: double stitched seams, a metal zipper fly, a snap closure on the waistband, and six suspender buttons. Made in the USA. Style #694.
BEN'S HICKORY SHIRT is made of 50% cotton/50% polyester blend for comfort, long wear, and minimal shrinkage. Choose from a long sleeve or short sleeve version which are both cut from the same roomy pattern. They also feature a 1/2 zip front, two chest pockets, and a pencil slot built into the left pocket. Made in the the USA.
Black Denim Pants
Hickory Shirt
List 3900
MADSEN’S 1-3 3395
4+ 3195
Fabric CementTEAR MENDER is great for fixing work clothes. It permanently binds fabric, canvas, leather, or any material it can penetrate, so it’s perfect for patching jeans, pack sacks, tents, and uphol-stery. It dries in minutes and is waterproof. Bottle size is 6 ounces. Item# 280-276.
Customers report patches stay flexible and attached even after garments are washed and dried many times.
List 1095
MADSEN’S 1-5 995
6+ 895
#176 Short Sleeve 2695 2495
#276 Long Sleeve 2995 2795
Type MADSEN'S 1-3 ea 4+ ea
Short Sleeve Version
Master Page
Call (360)736-1336 24 hours46
Work Jackets
Work Jacket
Lined Shirt/Jac
The HOODED SWEATSHIRT is made of cotton/polyester blend fleece with Carhartt's Rain Defender water-repellant treat-ment. This helps keep you dry in passing light showers. For cold and wet weather comfort, it is also good for layering under a raincoat. Its features include: a full-length brass zipper, two front hand-warmer pockets, and an inside pocket with zip-clo-sure. It also has an elastic waist-band and elastic cuffs. The attached hood is jersey-lined and has a draw-string closure.
The WORK JACKET features a brush-finished cotton outer shell that is treated with Teflon fabric protector. This makes the gar-ment water and stain resistant. It also features a fleece lined body, fold flat collar, snap cuffs, gussets under-the-arm, pleated elbows, and an inside chest-pocket for extra storage.
The LINED SHIRT can be worn as a heavy shirt or light jacket. It features a brushed cotton outer shell that is treated with Teflon fabric protector. It also features a fleece lined body, fleece lined side-seam hand-warmer pockets, and black taffeta sleeve lining for warmth and easy movement. It also has two exterior chest-pock-ets for storage.
Style: 100614Outer Fabric: Cotton/Polyester blend Color:Black&NavySizes: M - 4XLList Price: 5900
MADSEN’S 4999
Add$5forBig&Tallsizes.
Style: 540Outer Fabric: Brushed 100% Cotton Ins: Fleece LiningColor:BarkorBlackSizes: M - 4XLList Price: 4400
MADSEN’S 3795
Add$4forBig&Tallsizes.
Style: 301Outer Fabric: Brushed 100% Cotton Ins: Fleece LiningColor:BarkSizes: M - 4XLList Price: 6900
MADSEN’S 5795
Add$6forBig&Tallsizes.
Hooded Sweatshirt
Master Page l
“The Pro’s Choice” 47
Work Shirts l
Made In USA
The heavy 9 oz FLANNEL SHIRT has long sleeves and tails. The 100% cotton plaid is warm and comes in four types of buffalo plaid: red/black, green/black blue/black, and white/black. This flan-nel shirt is full-cut for comfort and has a button front. It comes with two pockets with button closures. Style# 121.
Heavy Flannel Shirt
This flannel shirt can be worn for work or casual dress. It looks good with a nice pair of jeans, but is also durable enough to hold up as a work shirt. It is made of 100% cotton flannel and features two chest pockets and a button front. It comes in a variety of colors. .
List 4800
MADSEN’S Each 3999
Tall Sizes and 2XL to 4XL add $3.
List 3700
MADSEN’S 1-3 3095
4+ 2795
Tall Sizes and 2XL to 5XL add $5.
List To 3400
MADSEN’S Each 2499
Bigs add $3.Talls add $3.
Sizes in stock: M - 5XL. We also carry Talls up to 5XLT.
Sizes: M - 4XLWe also carry Talls up to 3XLT
A CARHARTT POLO SHIRT is made of 65% polyester/35% cotton 6 oz knit fabric. This color-fast fabric resists fading, but releases stains, so the shirt looks good even after much wear and many washings. It also features a three-button front, a rib-knit collar, and a square-bottom. Colors: Black, Gray, Moss Green & Navy Blue. Style# K570.
Polo Shirt
A polo is as comfortable as a T-shirt, but offers a dressier look. it is also great for layering under a flannel shirt or sweat shirt.
Heavy Flannel Shirt
Master Page
Call (360)736-1336 24 hours48 Call (360)736-1336 24 hours48
Logger’s Shirts
HICKORY SHIRTS are available with either a half-zip or button front. A short-sleeve half-zip version is also available. Hickory shirts are worn by loggers and timber fallers everywhere because they are comfortable to work in and very durable. They are made of 100% striped cotton twill, which is really a medium-weight denim. This tough fabric lasts and lasts. It is also absorbent, so sweating is no problem.
Hickory shirts are cut from a roomy pattern, so you never bind up even when swinging an axe. They also have large button down pockets for carrying needed items.
Hickory Shirts
Long Sleeve Zipper & Button Front Hickory Shirts: Regular Sizes: . . . . . . . . Small, Medium, Large, Extra Large Big Sizes: . . . . . . . . . . .2XLarge, 3XLarge, 4XLarge, 5XLarge Tall Sizes: . . . . . . . . . . . Med Tall, Large Tall, XLTall, 2XL Tall Big & Tall:. . . . . . . . . . . . . . . . . . . .3XL Tall, 4XL Tall, 5XL Tall
See page #57 for kid sized hickory shirts.
Shown left: We now offer a zipper front hickory with short hem finished sleeves. This is for warm weather work when you want more than a T-shirt, but a long sleeve hickory is too much.
MADSEN’S 1-3 2795
4+ 2595
MT to XLT add $3.2XL&3XLadd$3.2XLT to 5XLT add $8.
Hickory ShirtThis HICKORY SHIRT is made of dura-ble 9.5 oz. hickory stripe denim and has tripple stitched main seams. It also fea-tures an 8" half-zip front and two chest pockets with flap covers and button closures. It also has two-button adjust-able cuffs with extended plackets. Sizes in stock: S-4XL and LT-3XT. Style# 100092
ButtonHickory
Short-SleeveHalf-ZipHickory
List 3600
MADSEN’S Each 2999
Bigs add $3.Talls add $3.
Master Page l
“The Pro’s Choice” 49
Shirts l
“The Pro’s Choice” 49
HICKORY SHIRTS are are made of 100% striped cotton twill. This tough fabric is absorbent, so its comfortable on a day filled with hard work and perspiration. Hickory shirts are cut from a roomy pattern, so they have plenty of room for free movement. They also have two large button down pockets for carrying what you need. Sizes: S - 4XLT.
POCKET T-SHIRTS are made of heavy 6.75 oz 100% cotton knit fabric. They feature a left chest pocket, taped neck and shoulder seams, and hemmed sleeves and bottom. The Henley style shirt also features a three-button placket, giving the shirt a dressier look. Both shirts can be worn alone or used for layering under a work shirt. Colors: Black, Green, Navy, or Grey. Sizes: S to 4X.
PocketTShirt PocketHenley
ZipperHickory ButtonHickory
Pocket T-Shirts
Hickory Shirts
Type List MADSEN'S
#820 T-Shirt 1200 895
#825 Henley 1500 995
Big&Tallsizesadd$1.
Type List MADSEN'S
#573.47 Zipper Front 3300 2495
#575.47 Button Front 3300 2495
Big&Tallsizesadd$3.
Master Page
Call (360)736-1336 24 hours50 Call (360)736-1336 24 hours50Colors are: Navy,
T- Shirts
T-Shirt
Colors:
Classic Short-Sleeve T-Shirt colors are: Black, Hunter Green, Army Green, Desert, Ash, Red, Carhartt Brown, Dark Brown, Heather Grey, Navy Blue, Orange, Port, Bluestone, and Stream Blue.
Classic Long-Sleeve T Shirt colors are: Navy Blue, Black, Hunter Green, Dark Brown, Heather Grey, Port, and Bluestone.
Camo T-Shirt color is: Realtree pattern.
Henley Short-Sleeve T-Shirt: Navy, Hunter Green, Black, Port, Bllue Stone, Heather Gray, and Dark Brown.
Henley Long Sleeve T-Shirt: Hunter Green, Black, Blue Stone, Navy Blue, Heather Gray, Port, and Dark Brown.
Type List MADSEN'SClassic T- Shirts:
#K87 Short-Sleeve 1800 1499
#K126 Long-Sleeve 2300 1899
Camo T- Shirts:
#K287 Short-Sleeve 3000 1999
Henley T- Shirts:
#K84 Short-Sleeve 2300 1699
#K128 Long-Sleeve 2800 2299
Tall and big sizes are slightly higher.
Short-Sleeve Classic T-Shirt
Short-SleeveCamo T-Shirt
Long-Sleeve Classic T-Shirt
Short-Sleeve Henley T-Shirt
Long-Sleeve Henley T-Shirt
CARHARTT T-SHIRTS are good for warm weather work or casual wear. Many are also worn under-neath another shirt for layering in cold working conditions. They are made of heavy-duty 6.75 oz cotton rib knit. This durable fabric is comfortable and long-wearing. It also resists shrinkage, giving a Carhartt T-shirt a true-to-size fit.
Other features include side seam construction, which minimizes twisting. It also has a left chest pocket where a Carhartt logo is proudly displayed. They come in a wide assortment of colors and Madsen’s has a complete inventory. We also have this popular T-shirt in a camo version imprinted with the Realtree pattern. Sizes in stock: S - 4XL including Talls in most sizes.
Master Page l
“The Pro’s Choice” 51
Shirts l
“The Pro’s Choice” 51
Force T-Shirt
HALF-ZIP SWEATSHIRTS are full-cut for comfort and look great when worn over a matching T-shirt. You’ll want one of these sweatshirts for work, sports, or casual wear.
Half-Zip Sweatshirt
PlainGrey,Blue,or Green: M to XL 2195
PlainGrey,Blue,or Green: 2XL 2395
BlackorOxfordw/logo: M to XL 2995
Blackor Oxfordw/logo:2XL,3XL 3095
Buy 4+ and save $2 each.
The shirt shown left has a Madsen’s logo sewn on the chest.
Type MADSEN'SMadsen’s LogoSweatshirt
MADSEN'S T-SHIRTS have a large Madsen's Pro's Choice logo on both the front and back. They are made of 100% cotton-knit and are comfortable for both work or casual wear. This is the same T shirt worn by competitors like Branden Sirguy at logging shows. See his pic on our web site at: www.madsens1.com.
FORCE T-SHIRTS are made of 5.75 oz. jersey knit. This fabric is a blend of 65% cotton and 35% polyester so it wicks away sweat and is also stain resistant. The shirt features raglan style sleeves for increased range of motion, a tagless neck label, and smooth flatlock seams for comfort. It also has a left chest pocket. Style# 100410. Colors: Black, Heather Gray, Moss, and Navy.
T-ShirtMADSEN’S 1-3 1995
4+ 1795
TallSizes&2XL to 4XL add $4.
List 2400
MADSEN’S Each 1999
Bigs add $3.Talls add $3.
Master Page
Call (360)736-1336 24 hours52
List 900
MADSEN’S 1-5 pr 575
6+ pr 555
Women's Wear
T h e W O M E N ’ S F L A N N E L L I N E D J E A N S h a v e t h e warmth and comfort of flannel pajamas. The jeans are a five-pocket style and are relaxed fit through the hips and thighs. They finish with straight legs. The waistband prevents gapping in back. Sizes: 4-18. Style# 100648.
T h e W O M E N ’ S ORIGINAL FIT JEANS are made for a wom-an's shape. In the hips and thigh area, they fit a woman's curves. They finish with leg openings that are boot-cut. They are made of 10.5 oz denim that is 77% cotton. Sizes: 4-18. Style# 100649.
Women’s Jeans
List 6000
MADSEN’S 4499
List 4800
MADSEN’S 3499
The WOMEN’S JACKET is great for work or casual wear. It is made from 12 oz. cotton sandstone duck fabric, which is soft yet durable. Inside the body is sherpa lining and in the sleeves, quilted nylon lining for warmth and easy movement. The jacket also features an attached three-piece hood, two slash pockets in the front, and two inside pockets. Colors: Purple, Rose, Dawn, and Blue. Sizes: S - 2XL. Style# WJ141.
Women’s Jacket List 11000
MADSEN’S 8999
Women's Boot SocksWOMEN'S BOOT SOCKS are similar to a man's boot sock but are sized for a woman's foot. They are knit from wool blend yarn made of 65% acrylic, 20% merino wool, 13% nylon, and 2% spandex. The ultra-soft merino wool adds warmth and comfort. This heavy-weight sock also features a reinforced arch for added fit and support. It also has a flat toe seam for toe comfort and fully-cushioned leg and foot. Size: M. Style# 8548.
Master Page l
“The Pro’s Choice” 53
Children's Wear l
Infant:6,12,18,24 3000 2299
Toddler:2T,3T,4T 3200 2499
Youth:4,5,6,7 3600 2999
KID’S BIBS are made of washed brown duck fabric, a softened version of the durable fabric used to make adult work wear. Features include adjust-able shoulder straps and two quarter top pockets. If your child likes to play with toy dump trucks on a big pile of dirt, your little contractor is going to love these bibs.
Color: Carhartt Brown
Kid’s Bib Overalls
Infant:6,12,18 2650 1795
Toddler:2T,3T,4T 2650 1795
Child:5,6,7 2650 1995
Youth: S- XL 2650 1995
Got a little logger at home? Now he or she can wear a hick-ory shirt just like Dad or Grandpa. This durable shirt is a miniature version of the clas-sic zipper front hickory. If your little logger wants something more feminine looking, we also carry them with pink hickory stripes.
Kid's Hickory Shirts
Buy four or more and save $1 per piece.
Infant:6,12,18 2000 1795
Toddler:2T,3T,4T 2000 1795
Child:5,6,7 2200 1995
Youth: S- XL 2200 1995
Size List MADSEN'S
Size List MADSEN'S
Size List MADSEN'S
Buy four or more and save $1 per piece.
KID'S FLANNEL SHIRTS are made of 100% cotton and fea-ture a 1/2 zip front. Additional features include two chest pocket and cuffs with button closures. The buffalo-plaid pattern colors are in: Blue/Black, White/Black, or Red/Black.
Kid's Flannel Shirts
Suspenders for KidsSUSPENDERS for kids are made of red elastic, and feature steel clips that clamp on to the waist band of most pants. The front is imprinted with either "Dad's Helper," "Grandpa's Helper," or "Little Logger." They are the perfect compliment to the hickory or flannel shirt above .
List 995
MADSEN’S 1-5 895
6+ 795
Color: Red onlySizes: 24", 28", or 32"
To fit suspenders, measure from the left front connec-tion point on the waist band, across the shoulder, to the right rear connection.
Month Size
Month Size
Month Size
Master Page
Call (360)736-1336 24 hours54
Suspenders
Call (360)736-1336 24 hours54
SUSPENDERS are made of 2" wide welting and have flat leather ends for suspender buttons. The ends are made of the same leather that is used to make work boots. The elastic is extra wide for maximum comfort and support.
FALLER'S SUSPENDERS are made of special 2" wide welting that is special woven for maximum stretch and strength. They are the most comfort-able and long wearing suspenders we offer.
Replacement Suspender Buttons
To install replacement but-tons, just stick the pivot through the fabric of your jeans. Set the button over it. Back up the button with a piece of wood and hit the pivot head with a hammer.
BUCKLE SUSPENDERS are made of heavy-duty 2" black elastic and have heavy black leather straps for attaching to suspender buttons. Fitting adjust-ments are made with buckles instead of welt clips. They also have metal rings for attaching small items. They are available in "X" or "Y" back style.
Suspenders
Faller's Suspenders
Buckle Suspenders
List 1700
MADSEN’S 1-5 1495
6+ 1395
List 3500
MADSEN’S 1-5 2795
6+ 2695
MADSEN’S
1-5 349
6+ 299
List 2300
MADSEN’S 1-5 1795
6+ 1695
Add $1 for 54".
Colors: Red or Navy Blue.
Sizes: 42", 44", 46", 48"
Color: Black only.
Sizes: Small - 42",Medium - 44", Large - 46", X Large - 48", XXX Large - 52”
Colors: Black (with-out our logo) or Orange with Black lettering as shown.
Sizes: 42", 44", 46", 48", 54"
A package includes eight button sets, which are usually enough to add or replace all the buttons on one pair of jeans and have a couple left over.
Item# 241-022
Master Page l
“The Pro’s Choice” 55
Suspenders l
“The Pro’s Choice” 55
CLIP-ON SUSPENDERS are made of heavy duty black elastic, and feature steel clips that clamp on to the waist band of most pants. The oversize clips are double plated to withstand moisture and perspiration.
Clip-On Suspenders"Y" BACK SUSPENDERS are made of 2" wide cotton elastic and have leather ends for attaching to suspender buttons. Some wearers prefer the feel of "Y" backs over the more common "X" back suspenders.
"Y" Back Suspenders
Leather Covered Felt Shoulder Pad
Classic Cotton Handkerchief
This HANDKERCHIEF is large sized and made of cotton. It is available in: Red #4142R, Blue #4142N, or Black #4143B.
List 2300
MADSEN’S 1-5 1795
6+ 1695
Add $1 for 54"
List 2300
MADSEN’S 1-5 1795
6+ 1695
Add $1 for 54".
List 1000
MADSEN’S 1-5 895
6+ 795
List 269
MADSEN’S 1-5 185
6+ 175
See the listing on page #57 for kid's suspenders
Color: Black only.
Sizes: 42", 44", 46", 48", 54"
Colors: Black (with-out our logo) or Orange with Black lettering.
Sizes: 42", 44", 46", 48", 54"
This SHOULDER PAD threads through one side of your suspenders to protect your shirt when carrying items on your shoulder. The heavy felt pad is covered with durable leather. Item# 280-1216.
Sam’s Tip To fit suspenders, put on your logger’s jeans and hold them at the height you want them. Next, measure the distance from the left front suspender button, across your shoulder, to the right rear button.
Master Page
Call (360)736-1336 24 hours56
Gloves
Call (360)736-1336 24 hours56
Chilly Grip GlovesCHILLY GRIP GLOVES have a warm synthetic liner and a durable rubber coated palm. They are flexible and providing excellent grip wet or dry. They are ideal for construction, fishing, and gen-eral labor. Sizes: S to XXL. Item# 290-A311
Thick Cotton GlovesTHICK COTTON GLOVES are sized for big hands and made of extra thick cotton on the palm and fingers for cushion and long wear.
POLAR PENGUIN GLOVES have a knit body and rubber-dipped palm, making them good for cold and wet conditions. They also wear well. The knit body is available in hi-viz orange #290-3396HO or yellow #290-3396HY. Size: S to XL.
PVC COATED GLOVES have a cloth body that is dipped in PVC which makes them waterproof and chemical resistant. They also feature a snug-fit-ting knit wrist. One size fits all. Item# 290-Y8KW.
White Ox Gloves
Polar Penguin Gloves
WHITE OX GLOVES are made with four panel fingers. This creates finger "tubes" for increased dexterity. The extra sewing this design requires makes the gloves a little more expensive, but they are worth it. Available with or without an elastic back straps. Size: M, L, & XL.
Add20¢foranelasticbackstrapand60¢forsizeXL.
List 780
MADSEN’S 1-11 550
12-35 495
36+ 475
List 795
MADSEN’S 1-11 625
12+ 525
36+ 485
List 695
MADSEN’S 1-11 495
12+ 450
36+ 350
List 495
MADSEN’S 1-11 249
12+ 225
36+ 195
List 595
MADSEN’S
1-11 350
12+ 295
36+ 275
PVC Coated Gloves
Bukaroo GlovesBUKAROO GLOVES are made with a leather palm and a canvas back. They are made from a full fit, gunn pattern with a wrap-around index finger and leather finger tips. Sizes: S to XL.
Add $2 for insulated version of this glove.
List 1895
MADSEN’S 1-11 1595
12+ 1495
Master Page l
“The Pro’s Choice” 57“The Pro’s Choice” 57
Polypropylene Gloves
Faller's Gloves
Nylon Faller’s Gloves
WHITE POLYESTER FALLER’S GLOVES are our traditional faller’s gloves. They have a snug fit that gives you the ability to pick up items that would be difficult with cotton gloves. Available in sizes: XS, S, M, L, & XL.
WHITE NYLON FALLER’S GLOVES are tight-knit and made of 100% nylon. This durable fiber doesn't absorb water and wears like iron. Its smooth texture also resists debris build-up. Available in sizes: XS, S, M, L, & XL.
BLUE POLYPROPYLENE FALLER’S GLOVES are similar to the gloves above, but are made of 100% polypropylene. This fiber wicks away moisture and provides insulation from the cold. These gloves make good glove liners for wearing under-neath regular work gloves in cold weather Available in sizes: Small and Large.List 490
MADSEN’S 1-11 425
12-35 399
36+ 375
List 490
MADSEN’S
1-11 219
12-35 199
36+ 175
List 490
MADSEN’S
1-11 195
12-35 105
36+ 99¢
List 190
MADSEN’S 1-11 99¢12-35 79¢36+ 74¢
List 590
MADSEN’S 1-11 495
12-35 450
36+ 415
Gloves l
ATLAS FIT RUBBER PALM GLOVES are made of tight knit cotton with the palm and fingers coated with natural latex. The result is a durable glove with excellent wet grip. The open back provides ventilation. Available in sizes: S, M, L, & XL. Item# 290-ATL300.
Atlas Fit Gloves
Atlas Nitrile Gloves
Atlas Therma GlovesATLAS THERMA RUBBER PALM GLOVES are similar to the gloves listed above, but the body is constructed of poly/cotton thermal woven fabric for extra warmth on cold days. Thermal’s are available in sizes: S, M, L, & XL. Item# 290-ATL301.
ATLAS NITRILE PALM GLOVES feature a seam-less nylon liner that has been palm dipped in Nitrile rubber. The thin Nylon liner offers great dexterity, yet is durable and long wearing. The Nitrile rubber coating also wears like iron. The open back provides plenty of ventilation. The glove is machine washable. Available in sizes: S, M, L, & XL. Item# 290-TA370B.
List 490
MADSEN’S 1-11 325
12-35 309
36+ 299
Master Page
Call (360)736-1336 24 hours58
Wool Faller's Gloves
Leather Palm Gloves Hi-Viz Leather Palm Gloves
Gold Gripper GlovesGRIPPER GLOVES are similar to faller’s gloves, but have a web of flexible rubber that is bonded to the surface of the glove for additional grip. Available in sizes: M, L, & XL.
List 299
MADSEN’S 1-11 245
12-35 225
36+ 210
RAGG WOOL GLOVES are warm and durable. Their seamless knit construction is of 85% wool and 15% nylon. The extended cuff length is for added warmth. The gloves are natural oatmeal in color. They are available in sizes: S or L.
List 598
MADSEN’S 1-11 495
12-35 465
36+ 450
List 498
MADSEN’S 1-11 399
12-35 350
36+ 315
Ragg Wool Gloves
List 498
MADSEN’S 1-11 295
12-35 275
36+ 250
List 498
MADSEN’S 1-11 325
12-35 299
36+ 279
GREEN WOOL FALLER’S GLOVES are warm and long-wearing. They are knitted from a blend that contains 70% wool. They can be worn alone or as liners for extra warmth. Available in sizes: M, L, & XL.
LEATHER PALM WORK GLOVES feature a suede cowhide palm and fabric back. They also have a leather knuckle strap and 2 1/2" safety-cuff. These durable gloves are also an outstanding value. Size: L & XL. Item# 290-3501C
HI-VIZ LEATHER PALM WORK GLOVES have an A grade split cowhide suede cowhide palm and fabric back. They also have a 3M reflective safety stripe and flourescent knuckle strap. Available in sizes: M, L, & XL. Item# 290-1954
Wonder Grip Gloves
List 995
MADSEN’S
1-11 495
12+ 450
WONDER GRIP GLOVES have a double-coated latex palm and a knitted body. This liquid-proof palm gives amazing grip in most working condi-tions. Sizes: S to XXL. Item# 290-WG318
Gloves
Master Page l
“The Pro’s Choice” 59
Travel Boot Dryer 4999 3999
Glove Drying Attach 1999 1499
Multi-Boot Dryer 9999 7999
12" Boot Extensions 1499 999
Standard Boot Dryer 4999 3999
Sweatshirt List MADSEN'S
Utility Packs & BagsUTILITY packs are made of green cotton canvas. They are available in several styles and types.
SmallPackItem# 490-1144 LargePack
Item# 490-2304
Bags Size MADSEN’S
#490-1099 MussettePack 15" X 15" X 5" 2195
#490-1144 SmallPack 17" X 13" X 6" 3195
#490-1140 LargePack 20"X13"X7.5" 3695
MussettePackItem# 490-1099
Glove Drying Attachment
Travel 110v Boot Dryer
Standard 110v Boot Dryer
The PEET SHOE DRYER is endorsed by boot manufacturers including Danner, Buffalo, and White.
No matter what weather the morning brings, starting the day with dry boots is always a plus. In addition to com-fort, this dryer will make your shoes last longer and your feet stay healthy.
Both the standard and travel dryers plug into a standard 110v outlet.
Packs & Boot Dryer l
Master Page
Call (360)736-1336 24 hours60
Type List MADSEN’S
#310-207 Short 550 495
#310-217 Long 850 795
Boot Saver Toe CapsBOOT SAVER toe caps help prevent premature wear of the toe area on a work boot. This is a common problem on boots with hard safety toes. Included in the kit are two caps, sandpaper, and a tube of cement for attaching them.
List 950
MADSEN’S 1-5 895
6+ 850
Toe Armor Coating
Durable Water Proofing
TOE ARMOR provides a durable layer of protec-tion to the toe or any area on a boot that needs extra protection. Toe Armor is easy-to-apply, hardens in 24 hours, and cleans up with water. It works best on dry new leather. Colors available: Brown or Black.
DURABLE WATER PROOFING is ideal for rain gear, tents, or boots. If your favorite waterproof jacket or soft-shell has lost its water resistance, or your rain gear is no longer shedding rain, don’t throw it out! Spray on ReviveX® Durable Waterproofing to create or restore water, oil and stain repellency on all your favorite outerwear.
Just spray this water-based formula on wet or dry garments, dry, and enjoy waterproof pants, jackets and rain gear again. No matter what the weather does, you’ll stay drier—and stay out longer—with ReviveX from Gear Aid®.
List 1100
MADSEN’S 995
Brown# 95128Black#95129
List 1100
MADSEN’S 995
Boot Tongue Protectors
We carry them in two sizes: The long ones fit best on boots with tall tops and those with a lace-to-toe design. Either can be cut down to fit most any boot.
TONGUE PROTECTORS (also called false tongues) are cut from leather and fit behind the laces on boots to protect the tongue and gusset leather. Prices are for a pair.
60
Boot Accessories
Master Page l
“The Pro’s Choice” 61
Description Size List Price 1-5 ea 6+ ea
#310-564 Obenauf’s LP Boot Paste 8 oz 1495 1295 1195
#310-584 Obenauf’s Boot Oil 16 oz 1695 1495 1395
#310-7775 Huberd’s Shoe Grease 7.5 oz 595 495 425
#310-2332 Bee Natural Wax Oil 16 oz 1600 1395 1295
#310-2332 Bee Natural Wax Oil 32 oz 2500 2295 2150
#310-1308 BeeNaturalMinkOil 8oz 750 695 650
#310-1330 Sno-Seal Protectant 7 oz 550 495 450
#303-97501 Danner Boot Dressing 4 oz 950 895 795
Leather Boot DressingOBENAUF'S LP paste was originally developed for treating the boots of wildland firefighters. What works on the boots of firefighters also works on the boots of logger's, timber fallers, and those working in less harsh condi-tions. Obenauf's has become popular among all boot wearers and is the best selling boot dressing at Madsen's. It is made by combining three different natural oils with bee’s wax and propolis. This combination resists bacteria and mildew, repels water, and keeps leather soft and flexible. Warming LP prior to its application makes it easier to apply and warming the boots with a hair dryer after its application helps LP penetrate the leather.
OBENAUF'S leather oil is easy to apply and good for touch-ups between applications of LP. It is also good for softening dry leather.
HUBERD’S is classic logger’s boot grease. Huberd’s will darken light col-ored leather because it contains pine tar. If your family has a history of working in the woods, your grandfather probably used this - Huberd’s has been making it since 1929.
BEE NATURAL wax oil helps waterproof and preserve leather boots. It contain's pine tar and is a good substitute for those who used to use Logger's World Boot Grease, which is no longer available.
BEE NATURAL mink oil contains no wax or pine tar. It simply softens dry leather and makes it flexible.
SNO-SEAL is an all season leather protectant. Its bee’s wax base water-proofs and protects leather from rain, snow, salt, and sun. It also lubricates and protects against drying and deterioration. Sno-Seal dries scent free.
DANNER boot dressing is designed to protect leather and help maintain water repellency. It also prolongs the beauty and suppleness of fine leather when used regularly. It applies easily with a clean dry cloth. Please specify color: Clear, Brown, or Black.
Boot Care l
Master Page
Call (360)736-1336 24 hours62
MADSEN’S PRICE Type 1-5 6+
Standard CalkWrench
WescoCalkWrench
Maxpro Ratcheting CalkWrench
#1100 StandardCalkWrench 349 295
#220 WescoCalkWrench 1000 900
#365 Ratcheting Wrench 995 895
Boot Care
Call (360)736-1336 24 hours62
Improve the fit and comfort of your boots with an insole or insert. We carry several types: The wool felt insert offers thermal insulation and cushion comfort. The Contour foam insole adds cushion and arch support to flat soled boots.
All of the insoles can also help take up space in boots that are a little big. This is a common prob-lem when your foot is a half size and the boots you want come only in full sizes.
Calk Wrenches
Boot Inserts & Insoles
MADSEN’S PRICE Type ! - 5 Pair 6+
#28114 Wool Felt Insole 595 495
#27002 Breath-O-Prene Foam Insole 895 799
Freesole RepairFREESOLE can be used to rebuild worn soles or heels, for fixing separations, or for waterproofing boot stitching. Some customers also use it to coat the toes on rubber boots for extra protection from abrasion and punctures. It has high adhe-sion to leather or rubber. Tube size is 1.5 ounces.
List 700
MADSEN’S
1-5 650
6+ 595Item# 310-455
Shoe Goo Sealer
List 600
MADSEN’S 1-5 550
6+ 495
Shoe Goo is a urethane product with hundreds of uses. In our shop, the guys even use it to seal termi-nals on saw electrical com-ponents. Tube size is 3.7 ounces.
Item# 310-1101
Boot Brush
Mount a SCRUSHER near the entrance to your home or office and keep dirt outdoors where it belongs. The stiff bottom bristles remove debris from even deep treads, while the soft side brushes won’t scratch the uppers. Made in the USA.
List 3700
MADSEN’S 1-3 2795
4+ 2495
Master Page l
“The Pro’s Choice” 63
Boot Care l
“The Pro’s Choice” 63
Replacement CalksReplace old dull screw-in calks (spikes) with a new set of sharp ones. We carry several types in bags of fifty:
• Our standard spikes are made of tool grade steel for maximum wear and durability. This is our best seller and the best choice for all-around use.
• The "Redwood" length spike, is similar to the standard spike, but has 1/2" long points. Some customers like them when working around trees with deep bark. If you are tempted to get these thinking they will wear longer than stan-dard spikes, know they tend to pack up more with debris and their length puts extra stress on the receptacles in the boot soles.
• The Cermec spike has a hardened core. These are standard length and fit into regular receptacles. Their hard core extends their life when working in rocky or abrasive conditions.
• Wesco spikes are proprietary and fit only Wesco boots. These sharp and durable spikes have a nut shaped sub-base that fits a special tool for easy removal and replacement. They will not fit into standard calk receptacles.
Leather & Nylon Boot Laces
NYLON LACES are strong and inexpensive. If you trim them, be sure to heat up the ends. Melting the ends of the cut fibers helps keep them from fraying.
LEATHER LACES are a little more expensive, but are preferred by most loggers. They are more flexible than nylon laces and will not wear out the eyelets in boots as quickly. Our leather laces are uniformly cut from top qual-ity hide.
Size& FitsBoot List MADSEN’S Type Top Height Price 1-9 10+
72" Nylon 8"-12" 295 249 225
72" Leather 8"-12" 525 495 450
96" Leather 8"-12" 650 525 475
108" Nylon 12"-16" 375 325 295
108" Leather 12"-16" 740 595 550
MADSEN’S PRICE Type 1-5 6+
Tool Steel Spikes
Redwood LengthSpikes
#186 ToolSteelSpikes(50) 1195 1095
#7066 Tool Steel (case of 1000) 15595 13995
#218 Redwood Length (50) 1295 1195
#1082 CermecSpikes(bagof50) 1995 1895
#2002 WescoSpikes(bagof50) 2750 2550
Note: Most calked boots have about 25 spikes per boot. The count varies a little due to different spiking patterns and shoe size.
Cermec Spikes
Wesco Spikes
Master Page
Call (360)736-1336 24 hours64
12" Top: #1912SIList 49900
MADSEN’S
43995
16" Top: #2916SIList 51900
MADSEN’S 45995
Calked Boots
Call (360)736-1336 24 hours64
Buffalo Calked Boots
Calked Boots
HI-LINE/BUFFALO CALKED BOOTS are made in Spokane, Washington and have been standard equipment in the Western woods since 1906. These boots feature a 12" top, a spring heel, and rubber-tire-cord out-soles with replaceable calks. The uppers are made of black 7oz full grain oil tanned leather. They also have a double vamp, full snag-resistant seams, solid brass stud-hooks and eyelets, and double-lock stitching. The boots are also rebuildable for years of extended life and value.
Style# 1271RDSList 42000
MADSEN’S 1-2 36995
3+ 35995
Westocksizes:8to13inDwidth&8.5 to 12 in EE width
Calked BootsMADSEN'S CALKED BOOTS have 10” tops and are made of durable black leather. They also feature a classic lace-to-toe design that allows for small changes in foot width. This improves the fit over the life of the boots and allows the wearer to adjust the fit for sea-sonal changes in sock thickness and so on. Other features include: Leather heel inserts, brass eyelets and hooks, and screw-in calks. Boots made with these features are usually expensive, but our volume buying allows us to offer these durable boots at a value price. Made in Washington.
Style# MH7801List 30095
MADSEN’S 1-2 24995
3+ 23995
Westocksizes:7to14inDwidth&7.5 to 13 in EE width
WESCO CALKED BOOTS are available with either 12" or 16" tops. The 12" top boot is a semi-lace-to-toe design, while the 16" version has a plain toe. Both are made of durable black leather with a reversed vamp. This makes the vamp more resistant to damage from the boot's sharp spikes. Additional fea-tures include: Rolled leather top facing, an all leather mid-sole and heel base, heavy-duty stitching, a formed Stytherm counter, all leather gussets, removable Ortholite foam slip-in inserts, and removable false tongues. These boots are rebuildable and still made in Scappose, Oregon.
Westocksizes:8-13inD&E
Westocksizes:8.5-13inD&E
Master Page l
“The Pro’s Choice” 65
List 29500
MADSEN’S 25995
Calked Boots l
“The Pro’s Choice” 65
Westocksizes:7to14inDwidth&8 to 13 in EE width.
Westocksizes:7 to 13 in E width only
Pronghorn Calks
Hiker Calks
Faller II Calks
MADSEN’S 23495
MADSEN’S 15495
DANNER doesn’t make boots with calked soles, so the original Pronghorn sole tread is ground off by a local boot-maker and replaced with a second sole containing screw-in spikes. The end result is a lightweight Gortex® lined calked boot. The taller tops also offer more ankle support that the boots above and are better for keeping wood chips out of your boots when you run a saw.
These boots are not as durable and do not offer the support of con-ventional leather calks, but they are light-weight and less expensive. Users also report that they break in quickly and are comfortable right from the start. Although waterproof failure is rare, because calk soles have been added, there is no warranty if the boots leak. Style# 42282C.
HOFFMAN FALLER II CALKED BOOT is a waterproof leather-style calked boot. The 10" upper is triple-stitched and has a replace-able molded sole. The boot also has a cushion insole for comfort. Style# 037-1.
Note: Inside the leather upper is a Sympatec® bootie, which is waterproof and breathable. Although Sympatec® failure is rare, Hoffman's will not warranty the waterproofness of this boot.
HIKER CALKS begin as Hi-Tec brand hiking boots. The lug bottoms on the original soles are ground off and replaced with a second sole containing screw-in spikes. They also feature a waterproof breath-able Dri-Tec liner. Style# 9046C.
Westocksizes:8 to 13 in Medium width only
HI-TEC
Master Page
Call (360)736-1336 24 hours66
Calked Rubber Boots
Call (360)736-1336 24 hours66
Calked Rubber BootsCALKED RUBBER BOOTS by Viking Askim have steel toes and cut-resistant material laminated into the front of the boots. The spiked-bottom soles feature replaceable screw-in spikes.. These soles are built into the boots at the factory, so there is no secondary sole to separate. The uppers are made of high content natural rubber and the liners are 100% cotton. If you are looking for a durable rubber boot, this is it. Style# VW-65.
Available in whole sizes: 6 - 14
List 18000
MADSEN’S
Pair 14495
LW5 Calked Rubber BootsLW5 RUBBER BOOTS have cut-resistant material laminated into the front of the boots (like the boots above), but do not have a safety-toe. The bottoms are molded-in and feature replaceable screw-in calks. A mixture of natural rubber makes these boots resistant to oils and chemicals.
Available in whole sizes: 7 - 13
List 20900
MADSEN’S Pair 14995
Calked Rubber BootsXTRATUF CALKED RUBBER BOOTS are well known for comfort and durability. They are made of tough neoprene rubber, which is softer, lighter, and more pliable than ordinary rubber. They also have a snug ankle fit and 16" tops - two more features loggers like. Since Xtratuf doesn't offer a calked version of this boot, our friends at Hoffman's grinds off the regular tread and replaces it with an extra sole that contains replaceable screw-in spikes. Available in whole sizes: 7 - 13.
See page #73 for information on t he non -calked versionof this boot.
For an insulated version of this boot add $10.
List 18500
MADSEN’S
1-2 16495
3+ 15995
Master Page l
“The Pro’s Choice” 67
List 9000
MADSEN’S 6495
Calked Boots l
“The Pro’s Choice” 67
CALKED RUBBER BOOTS by Hoffman have 12" tops and steel shanks. They also have a full-lace front for more ankle support than most slip-on boots offer. This feature makes the boots easier to put on and take off, too. These boots also have a 3mm felt lining for warmth and comfort. Style# 12RIC.
Calked Rubber Boots
Available in whole sizes: 7 - 13
List 14900
MADSEN’S
1-2 13495
3+ 12995
Insulated 'Pac' Style Boots"PAC" STYLE BOOTS feature leather uppers, waterproof rubber bot-toms, and wool felt liners. The boots have 14” uppers for ankle sup-port and protection. These full grain leather uppers are triple stitched where the leather joins the rubber bottoms.
List 23995
MADSEN’S 1-2 21495
3+ 20495
Fitting advice: These boots are available in full sizes 6 - 13. They run true to size and are sized with the felt liner in place. If you wear a size 10 in regular boots, buy a 10. If you wear a 9 1/2, buy a 10, because there are no half sizes.
ROMEOS can be worn indoors as slippers or outdoors as shoes. That's why they are so pop-ular with loggers and timber fallers. These romeos are made in the USA and feature tough leather uppers and VIBRAM® wedge boot soles. These soles have tread for grip, but clean well, which reduces tracking of mud or debris.
Romeo Slippers
Sizes available: In half sizes 7 to 15 inDwidth, 8to 14 in EE width.
MADSEN’S Pair 10695
Muck Camp Shoes
Available in men's whole sizes: 7 -13
MUCK CAMP SHOES are waterproof slip-ons. They are similar to the Muck Chore Boots, but are low cut, making them easy to get on and off. One customer describes his Camp Shoes as, “waterproof romeo slippers.” If you travel in a boat or motor-home, pack these instead of rubber boots because they take much less space. Style# EWCC333T
Master Page
Call (360)736-1336 24 hours68
Danner Boots
Call (360)736-1336 24 hours68
QUARRY BOOTS are one of the most popu-lar boot styles. They have black leather uppers and an 8" top. They are good boots for work, hunting, or any outdoor activity. We carry two versions: one with a regular to and one with a non-metalic safety-toe. All have waterproof Gore-Tex liners and dual-density Vibram Cascade soles. Made in USA. Style# 17309
Westocksizes:8-15Dwidth&8-14 EE widthincluding 1/2 sizes.
List 28995
MADSEN’S
25000
For boots with safety toe add $10. Style# 17311
Quarry Boots
EAST RIDGE BOOTS have a full-grain leather upper with 8" tops. Inside the boots is a 100% waterproof/breathable Gore-Tex lining. The boot features include an oil/slip-resistant Danner/Vibram out-sole with stitch-down construction. The dual-density mid-sole and cushioning polyurethane foot-bed helps provide all-day comfort. This boot is recraftable. Style# 62113
Westocksizes:8-12Dwidth&8.5-11.5 EE widthincluding 1/2 sizes.
List 26000
MADSEN’S
24000
East Ridge Boots
Add $30 for Super Rainforest version with safety toe Style# 11550
Rain Forest Boots
Westocksizes:8-12Dwidth&8.5-11.5 EE widthincluding 1/2 sizes.
RAIN FOREST BOOTS have 8" tops and uppers made of waterproof leather, and Gore-Tex booties for dry feet. They also feature a lace-to-toe design, stitch-down construction, and Vibram soles. This makes them a great choice for contractors and sportsmen alike. If you want a good pair of boots, but are unsure of which to choose, pick these. They are great all- around gen-eral purpose boots. Made in USA. Style# 14100.
List 35900
MADSEN’S
34000
Master Page l
“The Pro’s Choice” 69
Westocksizes:8-12Dwidth&8.5-11.5 EE widthincluding 1/2 sizes.
Westocksizes:8-15Dwidth&8-13 EE widthincluding 1/2 sizes.
Westocksizes:8-13Dwidth&8.5-12 EE widthincluding 1/2 sizes.
Boots l
“The Pro’s Choice” 69
Radical BootsRADICAL BOOTS are great work shoes, but their stylish looks make them good shoes for casual wear, too. Danner's exclu-sive Terra Force platform delivers light-weight stability to the job-site or wherever you choose to wear them. They also fea-ture oil resistant Pro Grip soles and water-proof Gore-Tex linings. These shoes are imported, but their quality is 100% Danner. Style# 45254.
PRONGHORN BOOTS are build on Danner's DEP1-H last, which gives these boots more of an athletic fit with a tighter heel-pocket and wider toe-box. They are great for high-speed outdoorsmen looking for a boot that is fast and agile. The uppers are made of a combination of durable nubuck leather and 1000 denier nylon. They also have a waterproof and breathable Gore-Tex lining. The outsole is Danner's dirt and rock gripping Talon. These shoes are imported, but their qual-ity is 100% Danner. Style# 45003.
SMOKE JUMPER BOOTS are NFPA approved for wild-land fire fighting. They feature 10" tops and uppers made of 7 oz. full-grain black oil-tanned leather. They also have a leather heel counter and leather pull-strap. Other features include a rolled collar, double-lock stitching, and solid brass eyelets. These boots are made in the USA and are completely rebuildable. Style# 110V.
For boots with safety toe add $10.Style #45258
List 18000
MADSEN’S
16000
List 20900
MADSEN’S
19000
List 35000
MADSEN’S
31395
Pronghorn Boots
Smoke Jumper Boots
Master Page
Call (360)736-1336 24 hours70
Leather Boots
Call (360)736-1336 24 hours70
USA Logger
List 15900
MADSEN’S
12995
The USA LOGGER is made in the USA. It has a 9" top and a full-grain black leather upper. It features a one-piece Vibram out-sole, a heavy-duty steel shank, and a Poron Permafresh insole for comfort. This boot is also electrical hazard rated. Given its quality components and the fact it is made here in the US, it is an excellent value. Style# 922.
List 20100
MADSEN’S
17895
Value LoggerThe VALUE LOGGER has an 8" top and a brown leather upper. It features a one-piece rubber lug out-sole with welt construction and a steel shank. It is electrical hazard rated. Don't let the low price fool you, this is a darn good boot. Style# 821.
Westocksizes:8D-15D&8.5 EE - 13 EE.
Westocksizes:7.5D-12D&8.5 EE - 11.5 EE.
Westocksizes:7.5D-12D&8.5 EE - 11.5 EE.
List 12700
MADSEN’S
9895
The WATERPROOF HARD-TOE LOGGER has an 8" top and a copper colored leather upper. Its features are similar to the boot above, plus it also has a waterproof "scuba-liner" and steel safety toe-cap. Again, this boot is imported, but offers quality and fea-tures usually found on boots costing twice as much. Style# CA9821
Waterproof Hard-Toe Logger
For boots with safety toe add $9. Style# 1922
Master Page l
“The Pro’s Choice” 71
Waterproof LoggerThe WATERPROOF LOGGER is a lace-to-toe style boot. It features a waterproof scu-baliner and Taibrelle lining. It has a full-grain black leather upper with an 8" top. Underneath is a steel safety toe. It also has welt construction, a triple-rib steel shank for support, and a slip-resistant lug sole. Style# CA9825.
List 17000
MADSEN’S
14295
Westocksizes:8D-13D&8.5 EE - 13 EE.
Leather Boots l
“The Pro’s Choice” 71
Lug Sole Boots
Westocksizes:7.5D-14D&8 EE - 14 EEin full and half sizes.
MADSEN'S LUG SOLE WORK BOOTS are custom made for Madsen's here in the USA. We took the durable leather uppers used on our calked boots and mated them with Vibram lug soles and block heels.
Additional features include: Steel shanks, leather heel inserts, and brass eyelets and hooks. Lace-to-toe boots made of these materials are usually expensive, but our volume buying allows us to offer them at a value price. Style# MH7809
MADSEN’S 1-2 22195
3+ 21595
Westocksizes:8-12inD&8.5-11.5EEwidth.
The WATERPROOF WORK BOOT has an 8" top. We also carry with a composite safety-toe. All boots feature a full-grain black leather upper and waterproof Scubaliner lining for dry feet. The boots also have a heavy-duty steel shank for support.
Waterproof Work Boots
MADSEN’S Style Type List PRICE
#CA8030 8" top without Safety Toe 17200 13695
#CA8530 8" top with Safety Toe 17800 15195
Master Page
Call (360)736-1336 24 hours72 Call (360)736-1336 24 hours72
Rubber Boots
Muck Chore Boots
Muckmaster Boots
MUCK CHORE BOOTS feature flex foam booties that are water-proof, lightweight, and flexible. They form to the wearer’s calf for maximum comfort. Customers report these are the most comfortable "rubber" boots they have ever worn. Among their features are steel shanks for added support and moisture control linings that wicks away perspiration.
Available in whole sizes only: men's 6 -13 women's: 7 - 14
Available in whole sizes only: men's 7 -13 women's: 8 - 14
MUCKMASTER BOOTS are similar to Muck Chore Boots, but feature aggressive high-trac-tion soles for grip and stability. Additional fea-tures include high rubber overlays for protec-tion against rocks and brush, thermal foam underlay for additional warmth, and additional achilles overlays for extra protection. Contoured foot-beds offer support and all-day comfort.
MADSEN’S Type Part# List PRICE
MADSEN’S Type Part# List PRICE
Chore Boot CHH000A 12095 9095
Chore w/hard-toe CHS000A 13595 10895
Above: The tall boot is the stan-dard height and the shorter one is the mid cut.
MuckmasterBoot MMH500A 14095 10595
Mid-cutMuckmaster MMM500A 13595 10295
PVC XT BootPVC XTPS are rugged boots that give depend-able waterproof protection at an economy price. They are seamless molded boots that are rein-forced at critical stress points. The hard-toe ver-sion meets ANSI spec 241 1999 section 1 for impact/75 and compression/75 toe protection. They are both made in the U.S. We stock them in whole sizes: 7-13. Plain toe Style #75122.
List To 3800
MADSEN’S
2895
Master Page l
“The Pro’s Choice” 73“The Pro’s Choice” 73
Rubber Boots l
XTRATUF BOOTS are made of neoprene rubber that is triple-dipped in a special sealant. This makes them resistant to chemicals and oil. This also makes them softer, lighter, and more pliable than ordinary rubber boots.
These boots feature built-in cushion insoles with arch support, fabric lining, supportive heel counters, and extra-thick bumpers for toe and heel protection. The chevron slip-resistant soles grip smooth wet surfaces for better traction and stability.
Kid’s Xtratufs $26.99
Rubber Boots
Safety MADSEN’S Type Toe Insulation List PRICE#22272 Standard Knee Boot 12900 8995
#22273 Bootw/SafeToe&Insulation X X 15800 10895
#22274 Boot w/Insulation X 14900 10395
#22272 Standard
Knee Boot Sizes: 4 - 14
Tall Boot SocksWADER SOCKS go up over-the-knee and are ideal for use with any high-topped rubber boots. The socks are knit from a thermolite/merino wool blended fiber and fea-ture nylon reinforcing in the toe, heel, and upper. This provides both comfort and durability. The socks contain: 17% nylon, 80% merino wool, and 3% spandex. Available in sizes: M - XL. Made in the USA. Style# 9061.
List 1800
MADSEN’S Ea Pair 1495
PRONGHORN & QUARRY boot socks are made for use in Danner boots, but will work well in other boots, too. The high elastane Lycra content helps keep the socks up and maintains a lasting fit. The socks feature nylon reinforcing in the toe, heel, and shin area for extra wear and comfort. They contain: 38% merino wool, 37% acrylic, 10% stretch nylon, 10% nylon, and 5% elastane Lycra. Available in sizes: M - XL. Style# 50303 & 50316.
List 2400
MADSEN’S Ea Pair 2000
#22274InsulatedSz: 5 - 14
#22273Insulated Hard ToeSz: 8 - 13
Master Page
Call (360)736-1336 24 hours74 Call (360)736-1336 24 hours74
Work Socks
List 1100
MADSEN’S 1-5 pr 745
6+ pr 715
CLEAR CREEK
Crew Socks Value PackCREW SOCKS VALUE PACK come in a six-pair pack. They are made of 87% ring-spun cotton, 11% nylon, 1% polyester, and 1% spandex. This mid-weight sock is for light work or everyday casual wear in moderate to hot temperatures. It can also be used for layering. The cotton content absorbs moisture and draws it away from the skin. For most users, this sock works well in shoes and boots with tops 8” and less. Made in the USA.Available in size 10-13. Colors: White or Black/Gray mix. Style# 6546
List 1800
MADSEN’S 6 Pair 1225
List 2100
MADSEN’S 4 Pair 1595
Outdoorsman SocksOUTDOORSMAN SOCKS are heavy-weight wool blend boot socks. They are made with ultra-soft merino wool for warmth and comfort. They also feature arch support for added fit and have a full-cushion leg and foot. The toe seam is flat for comfort. The sock is made of 65% acrylic, 20% merino wool, 13% nylon, and 2% spandex. Made in the USA. Available in sizes M - XL. Style# 8380.
Wool Blend Boot SocksWOOL BLEND BOOT SOCKS are made of 38% polyes-ter, 31% acrylic, 19% Merino wool, and 9% nylon. This combination of fibers wick moisture from feet and dry quickly. It also offers itch-free comfort not found in all wool blend socks. Theses socks also feature a reinforced heel and toe area for great durability. Available in sizes 10-13 only. Style# CC847-4. The price is for a four-pair-pack, so this is an excellent value.
Diabetic Crew SocksDIABETIC CREW SOCKS have a knit cotton blend foot and a loose fitting top. These socks are recommended for people with diabetes, edema, neuropathy, or any kind of circulation problems. Colors: Grey or White. Available in size: 10-13 or 13-15. Made in the USA. These come in a package of three pairs.
List 600
MADSEN’S PRICE3-pack 499
Master Page l
“The Pro’s Choice” 75
Steel Toe Boot SocksSTEEL TOE BOOT SOCKS have a double-cushioned sole and toe box, which makes them especially good for use in boots with safety toes. They are made of 81% acrylic, 18% stretch nylon, and 1% Spandex. This combination of fibers keeps feet dry, warm, and comfortable. They also feature a stay-up leg, a reinforced foot bottom, and a smooth-looped toe seam. Their precise boot-to-sock fit insures comfort in any type of work boots. Made in the USA. Available in sizes M - XL. Style# 6510.
List 1400
MADSEN’S
1-5 pr 975
6+ pr 925
“The Pro’s Choice” 75
Work Socks l
List 1600
MADSEN’S 1-5 pr 1125
6+ pr 1075
List 1200
MADSEN’S 1-5 pr 825
6+ pr 775
Merino Wool SocksMERINO WOOL SOCKS have an outer layer of 85% Merino wool, 14% stretch nylon, and 1% Spandex. The inner layer is fully thermalined for extra comfort and shock absorption. The heel and toe are reinforced for extended wear. The toe has a flat smooth seam for extra toe comfort. Super-soft Merino wool provides itch free comfort and naturally moves moisture away from the foot. The sock also has a Lycra® arch brace for support and snug fit. Available in sizes M, L, & XL. Made in the USA. Style# 7014.
List 2000
MADSEN’S 1-5 pr 1425
6+ pr 1375
Steel-Toe Wool SocksSTEEL-TOE WOOL SOCKS are made of 88% worsted wool, 10% nylon, 1% high bulk acrylic, and 1% Spandex. They feature a full-knit body with extra cush-ion in the toe and sole. They also have flat toe-seams and the heels are reinforced. The added Lycra helps the socks stay up. These are excellent cold-weather boot socks. They will keep your feet warm even in cold working conditions. They are available in sizes M, L, & XL. Made in the USA. Style# 6650.
Thermal Boot SocksRUGGED THERMAL BOOT SOCKS are made of 62% hi-bulk acrylic, 20% stretch nylon, 17% worsted wool, and 1% Spandex. They feature a fully thermalined con-struction that absorbs shocks and insulates. They also have a non-terry vamp to reduce bulk and a flat toe-seam. The toe and heel – high wear areas – are nylon-reinforced. Made in the USA. Available in sizes M, L, & XL. Style# 6640.
Master Page
Call (360)736-1336 24 hours76 Call (360)736-1336 24 hours76
Work Socks
Acrylic / Wool SocksPOLY/WOOL BLEND extra-heavyweight socks are 49% acrylic, 36% Merino wool, 14% nylon, and 1% Spandex. The Wick Dry system moves moisture away from the skin, which helps keep your feet dry under a variety of weather and temperature conditions. This helps reduce hot spots, which can eventually lead to blisters. These socks are warm, comfortable, and long-wearing. Made in the USA. Available in sizes M & L. Style# 7359.
Wool Work SocksWOOL WORK SOCKS are extra-heavyweight work socks made of 84% worsted wool. This premium wool is preshrunk to insure fit throughout the leg and foot. The balance is a blend of 9%acrylic, 6% nylon, and 1% Spandex. These socks are terry-knit in the foot area, while the leg is rib-knit. The over-the-calf leg length insures a good fit, even with tall rubber or leather boots. Available in sizes M - XL. Made in the USA. Style# 7267.
List 1400
MADSEN’S 1-5 pr 975
6+ pr 925
List 1600
MADSEN’S 1-5 pr 1125
6+ pr 1075
Wick Dry Thermals WICK DRY THERMAL heavyweight socks are made of 65% Duraspun® acrylic, 20% worsted wool, 14% nylon, and 1% Spandex. This blend wicks moisture from your feet into a moisture-absorbing outer layer. The result is warm and dry feet. The nylon serves to make the com-bination abrasion resistant. The body of the sock is “terried” or looped inside for cushion. The color is grey with an olive top. Available in sizes M - XL. Made in the USA. Style# 7586.
List 1000
MADSEN’S 1-5 pr 715
6+ pr 665
Dry feet are comfortable and healthy feet. That's one of the reasons LOGGER'S SOCKS are our best selling work socks. They contain high bulk Orlon acrylic, a miracle fiber that wicks moisture away from the feet. When this Orlon is combined with high stretch nylon, the results are very durable socks which will keep feet warm and dry. The full terry knit also provides cushion and thermal insulation. Logger's Socks are white with red tops. They are made of 80% Orlon acrylic, 10% cotton, 9% nylon, and 1% Spandex. Available in sizes M - XL. Made in the USA. Style# 7587.
Logger’s Socks
List 1200
MADSEN’S 1-5 pr 825
6+ pr 775
Master Page l
“The Pro’s Choice” 77
Ultra-Dri All-Season Tall Boot Socks
These 17" over-the-calf ALL SEASON TALL BOOT SOCKS feature ultra-dri moisture control, arch support for added fit, stay-up leg and top, and a reinforced heel and toe. These work great with tall-topped calked boots like Wesco 16" top boots. The sock is made of 75% ultra-spun polyester, 23% nylon, and 2% Spandex. Made in the USA. Size L. Style# 9780.
List 800
MADSEN’S 1-5 pr 545
6+ pr 495
Over-the-Calf Tall Boot Socks
OVER-THE-CALF BOOT SOCKS have 17" tall tops and are great for use with tall-top calked boots. Additional features include added arch support, reinforced heel and toe, and a full-cushion leg and foot. These heavy-weight socks are made of 30% acrylic, 30% ultraspun polyester, 20% wool, 17% nylon, and 3% Spandex. This blend helps keep feet warm and gives superior mois-ture control. Made in USA. Size L. Style# 9175/2. Sold in two-pair packs.
HEAVY-WEIGHT WOOL BOOT SOCKS feature supe-rior moisture control and warmth, stay-up leg and top, and a reinforced heel and toe. These heavyweight socks are made of 30% acrylic, 30% ultra-spun polyester, 20% wool, 17% nylon, and 3% Spandex. Made in USA. Size L. Style# 9727/2. Sold in two-pair packs.
Heavy-Weight Wool Blend Boot Socks
Work Socks l
List 1100
MADSEN’S 2-pack 775
3+2-pk735
List 1700
MADSEN’S 2-pack 1165
3+2-pk1120
Master Page
Call (360)736-1336 24 hours78
Faller's Items
Air Filter Oil & Cleaner
A light film of AIR FILTER OIL on the element of a K&N air filter helps trap small particles. The CLEANER is a special detergent for cleaning K&N filters.
Madsen's carries sev-eral types and sizes of gas jugs. They are all made of durable and non-corrosive plastic. Spouts are included. Call us for more infor-mation.
Type Size PRICE
Type Gas Capacity PRICE
Filter Oil 12.25 oz. 895
Filter Cleaner 32 oz. 1195
Combo Gas/Oil Jug 1.5 gal. 2995
Gas Only Jug 1 gal. 1099
Gas Only Jug 2 gal. 1399
Gas Only Jug 5 gal. 1899
Timber Falling SignA TIMBER FALLING SIGN is required on many jobs for road safety. This one is made of high-visi-bility orange mesh and rolls up for easy storage. The optional three legged stand also folds for easy transport.
Sign Only 5395
Tripod Only 4595
Gas Jugs
Duct TapeDUCT TAPE can temporarily repair nearly any-thing. It can fix a torn rain-coat. It can hold a broken cover on a saw. It can be used to reinforce the fingers on work gloves. We even use it to reinforce shipping boxes when we're sending out a heavy item. This tape is good quality -- it's tough and will stick to almost anything.
Shown above is the combo jug. This is good for saw operators because you can put mixed fuel on one side and bar & chain oil on the other.
Blanket CanteenThe CANTEEN holds four quarts. It has a blanket cover and is plastic lined.
List 1200
MADSEN’S
1-9 895
10+ 825
List 895
MADSEN’S
1-9 699
10+ 625
Master Page l
“The Pro’s Choice” 79
Saw Air Filters l
“The Pro’s Choice” 79
13⁄4" flange diameter 2595 2195 2095
2" flange diameter 2695 2295 2195
11⁄4"flangediameter FitsHUSKY288&394 2695 2295 2195
Note:Itwillfitunderthestockcover.
Smallwhitefoam FitsHUSKY266,288,2101 835 575 525
(066 needs cover plate) STIHL044,046,066,088
MAX-FLOW Air FiltersThe Max-Flow filter system is easy to install and does not require any modification to the chain saw. The kit includes: A filter cage, a heavy-duty rain cover, two foam elements, a nut plate, and instructions. The system can be used with or with-out the rain cover.
The kit comes with two elements. Each has different pore sizes for different working conditions. A small-pore foam element is best when working in dusty conditions. The large-pore foam offers maximum flow, but does not filter fine particles. Both filters are washable and reusable. MAX-FLOW recommends using BEL RAY foam filter oil after each cleaning.
Max-Flow filter kits are available for STIHL 044, MS440, 046, MS460, 066 & MS660. Please specify which saw you are fitting.
MADSEN’S PRICE 5095
Replacement Foam Elements 1475
BEL RAY Filter Oil - one liter 1495
Pro Saw Performance Air Filters
#UNI1
MADSEN’S PRICE Type Description Fits List Price 1-4 ea 5+ ea
#K&N 1
#K&N 4
Shown below are a number of popular air filters. Some require velocity stack adapters and modification to the filter cover housings. We carry a few filters not listed here and several adapters. Please contact us for information on the filter options for your saw.
#K&N 12
Master Page
Call (360)736-1336 24 hours8080 Call (360)736-1336 24 hours
Saw Repair
Price is for either #242 or #271. Please specify which type you want when ordering.
LOCTITE is a pro-saw user’s friend. It will reduce down time more than anything else we sell. We use both types in our shop.
LOCTITE #242 THREAD LOCKER:• helps hold screws which attach shrouds• is good for holding delicate screws• is best if you plan to disassemble at a later date
LOCTITE #271 STUD & BEARING MOUNT :• helps hold main bearings to case mounts• helps hold bar studs & dawg bolts in place• should be used when installing TIME-SERTS Tip: When disassembling a component that was assembled with #271, heat the fasteners to release the bond.
List 1295
MADSEN’S 1-9 995
10+ 950
Size X For For Component MADSEN’S PRICE Thread Pitch Saws Repair Kit Price Inserts
We repair stripped threads in our shop with TIME-SERTs. We prefer them over other thread-repair systems because they are a solid-bushing thread insert. Their thin walls have synchronized internal-external threads and make an excel-lent repair. They are also easy to install and lock into place.
Each kit contains a drill, counter-bore, cutting tap, & insert driver. When ordering a kit, please also order inserts.
Thread Repair Kit
4mmX.8 STIHL oilpump&ignitionscrews 6860 110 ea
5mmX.8 STIHL mostbuffers&housingscrews 6120 110 ea
HUSKY most housing screws
6mmX1 STIHL buffermounts,cylinderbolts 5760 110 ea
8mmX1.25 STIHL smallblockbarstudsonmostmodels 6120 110 ea
14mmX1.25 STIHL sparkplug 12140 220 ea
Faller's DawgsFALLER'S DAWGS are laser cut from heat treated alloy steel. They are designed to be used in matching pairs. Their large tooth design works great for gripping deep or rough bark. The point positions are also designed to maximize leverages with long cutting attachments.
Pictured left: This dawg is the outside dawg for a HUSQVARNA 395. It fits on the outside of the bar cover and is mounted on the bar studs like the fac-tory dawgs. The inboard dawg mounts on the main case on the factory mount-ing points.
We carry them for current models of STIHL and HUSQVARNA falling saws. Most dawgs are $15 to $20 each. Please specify what model saw you are fitting when ordering.
Master Page l
“The Pro’s Choice” 81
Saw Repair l
“The Pro’s Choice” 81
NGK Spark Plug#BPMR7A SPARK PLUG works in most models of STIHL & HUSKY saws. It is a high-quality resistor type plug with an extended tip. It also has a solid top, that doesn't vibrate loose.
Pro Safety Handle BarsPRO SAFETY HANDLE BARS are made of light-weight and durable alloy material. They fit in the factory positions and come with rubber handle grips. Please ask about mounting screws for your application.
MADSEN’S PRICE 12650
Black Electrical TapeBLACK ELECTRICAL TAPE is a timber faller’s fix-all. In addition to electrical repairs, it can be used to finish the day when it is necessary to tape sticks to broken handle bars and so on.
List 325
MADSEN’S 1-9 109
10+ 99¢
Heat Shrink TubingHEAT SHRINK TUBING can easily repair damage to the insulation on a saw's wiring. Simply place the tube over the exposed wire, then gently apply heat. The tubing will shrink and grip the wire making a new layer of insulation. This repair is less bulky and more durable than electrical tape. The quantity is one 12" section. #HS-12
List 350
MADSEN’S 1-9 275
10+ 225
List 1960
MADSEN’S 1-11 1295
12+ 1195
TRI-FLOW is a high-grade oil that contains micronized teflon, a corro-sion inhibitor, a moisture displacer, and a special solvent. It penetrates inaccessible areas to clean and lubri-cate. It even breaks down the crys-talline structure of corrosion.
Spencer recommends TRI-FLOW for use in their tapes. Customers report it also works well on guns, in fishing reels, and in other mechanisms that require light oil.
Lubricant
List 480
MADSEN’S
1-9 385
10+ 310
Made In USA
Master Page
Call (360)736-1336 24 hours82 Call (360)736-1336 24 hours82
TK-7 OCTANE BOOSTER works great in today's high performance chain saws. When pump octane is too low, add this for more octane. Bottle size is 10 ounces.
High Tooth Count Racing SprocketPIN DRIVE RACING SPROCKETS are available in tooth counts from 8 to 16 and in 3⁄8, .404, and 1⁄2 pitch. They can be spline bored to fit OREGON clutch hubs or straight bored with standard keys. Racing sprockets are made of heat treated alloy steel.
Tip: These do not work well on production saws.
MADSEN’S PRICE3⁄8x9pin 2390
3⁄8x10pin 2560
404 x 8 pin 2710
404 x 9 pin 2920
Octane Booster
List 2195
MADSEN’S 1-5 1595
6+ 1495
The FLOATING RIM SPROCKET SYSTEM is the ultimate drive sprocket. It allows the chain to align perfectly with the groove in the bar through the use of a precision rim that “floats” on a splined hub. Also, if the chain derails, the spline does not destroy the chain's drive links. The system is easy to install and is available to fit most chain saws.
Call us for the price of a system that fits your saw.
Sprocket System
List 620
MADSEN’S
1-9 495
10+ 445
Replacement RimsREPLACEMENT RIM SPROCKETS for the above system are available in 3⁄8" X 7, 3⁄8" X 8, and .404" X 7. Please spec-ify pitch and tooth count when purchasing.
Starter RopeSTARTER ROPE is made of nylon and features a multi-carrier outer braid and special core for strength. This is unique design resists fraying and wear on starter bushings. The rope is strong, yet flexible. It is made in Germany.
MADSEN’S PRICE
164’ roll of 3.5mm (#4.5) 2235
164’ roll of 4.5mm (#5) 2385
A 3.5' section in either size is $2.50.
Saw Repair
Master Page l
“The Pro’s Choice” 83
Saw Repair l
“The Pro’s Choice” 83
“T” Handle Allen Wrenches
“T” Handle Torx Wrench
The TORX WRENCH fits most fas-teners on late model STIHL saws.
Carb Adjustment Screwdriver
The CARB ADJUSTMENT SCREWDRIVER has a thin blade and a long shank that fits the adjustment screws on most saw carburetors. It also features a magnetic-end and a handy pocket-clip.
Digital Engine Tach
MADSEN’S PRICE 9995
Engine RPM is easy to measure with this battery powered DIGITAL TACHOMETER. Carb adjust-ing becomes simple -- just turn the adjustment screw, watch the tach, and set the desired RPM.
On saws, RPM measurement is accomplished by pointing the unit near the spark plug wire. The unit picks up the spark pulses and counts them with its built in micro-computer. It quickly calcu-lates the amount of sparks that will occur in a minute and displays the number.
List Price 595
MADSEN’S 290
List Price 1225
MADSEN’S 985
MADSEN’S 195
Epoxy Repair KitQUIK STEEL is an epoxy repair that is resistant to gas, oil, and water. It is good for fixing fuel tanks damaged by thrown chains and so on.
A repair kit contains two tubes -- one is an epoxy paste and the other a hardening compound. When mixed together, the blend hardens, setting up in fif-teen minutes and fully curing in one hour. Item# 210-172
List 865
MADSEN’S 1-5 650
6+ 595
C O M B I N A T I O N B A R WRENCHES fit most European saws. We stock a large inventory of many different styles. Please specify type and version when ordering.
List 425
MADSEN’S 1-9 395
10+ 345
Combination Spark Plug & Bar Wrench
• The 3mm size is used for removal of oil pumps and some ignition components.• The 4mm size fits many standard exterior compo-nents on HUSKY and older STIHL saws.• The 5mm size is used for cylinder removal on older STIHL and some mounting components.• The 3⁄16" size is used for cylinder removal on older HUSKYS and some mount components.
Master Page
Call (360)736-1336 24 hours84
Alaskan Saw Mills
Call (360)736-1336 24 hours84
The ALASKAN SAW MILL is a portable mill attachment that clamps to the chainsaw bar. It is best to buy the biggest mill that you think you will ever use because the mill will adjust down to accommodate shorter bar lengths. It is best to power this mill with one or more large chain saw engine.
Size Description Maximum Cut MADSEN’S
The MINI-MILL is an economical mill-ing device for producing lumber from smaller logs. It should be powered with a medium sized power saw. It can be used along with the MK II for squaring logs and edging slabs to increase pro-duction. It comes complete with 12 feet of guide rail in 2' lengths.
24"AlaskanMillG-776-24 20" 18900
30"AlaskanMillG-776-30 26" 19900
36"AlaskanMillG-776-36 32" 21900
48"AlaskanMillG-776-48 44" 24900
56"AlaskanMillG-776-56 52" 26900
60"AlaskanMillG-776-60 56" 28900
72"AlaskanMillG-776-72 68" 31900
#G-555B
MADSEN’S PRICE 9900
Extra “v” rail 2’ 550
Mini-Mill
Alaskan Saw MillHow an Alaskan Saw Mill Works
Now you can make your own valuable, smooth, and ready to use dimensioned lumber. Mill trees where they fall and produce boards of any thickness -- from half an inch to thirteen inches and any desired length.
Master Page l
“The Pro’s Choice” 85
Alaskan Saw Mill Accessories l
“The Pro’s Choice” 85
#G-801
MADSEN’S PRICE 4750
With roller #G-975
MADSEN’S PRICE 8550
Without roller #G-971
MADSEN’S PRICE 4450
#G-850
MADSEN’S PRICE 3350
#G-850
MADSEN’S PRICE 3650
Call for price and availability.
Auxiliary Oiler
Helper Handle
Slabbing Rail Brackets
Double End Chain Saw Bar
Long Mill Support Kit
The OILER ASSEMBLY consists of a tank, mounting bracket, clamps, valves, and tubing. Proper oiling results in greater chain life and increased production.
The HELPER HANDLE is available with an idler rol ler for use with double end bars, or without for standard bars. It is made of heavy die cast alumi-num for light-weight and extra durability.
SLABBING RAIL BRACKETS ensure a mill's initial cut is smooth and level. They are used to attach two straight 2X4's to the top of a log. This supports and guides the saw mill. Subsequent cuts do not use slabbing rails, but are guided by the smooth and level surface they helped create.
The DOUBLE END BAR is made for use with two power heads or a helper handle with idler roller. Available in lengths: 44", 50", 56", 66", 72", 84", & 96".
The LONG MILL SUPPORT KIT is an additional cross-support intended for use on mills 48" and wider. Adding one or more of these supports helps stiffen the mill and is especially beneficial to long-spanning rail supports.
Master Page
Call (360)736-1336 24 hours86 Call (360)736-1336 24 hours86
Chain Saw Winch
List Price 112900
MADSEN’S PRICE89900
A LEWIS WINCH is great for moving small logs for firewood. Hunters like it for drag-ging big bucks or for pulling out a truck out that is stuck in the mud. The winch has hun-dreds of uses because it can be taken any-where you can take a chain saw.
Pulling capacity depends on the size of saw you use for power, but maximum pull is about 4000 lbs. We recommend mating the winch to a mid-sized saw. The engine should be at least a three cubic inches (or 50 cc). This combination will pack a lot of power in a small spot, because like a chainsaw, a Lewis winch is made of lightweight components.
The winch mount shown couples directly to the saw’s clutch drum. Some saws have external clutches that prohibit this type of mounting.Ifasawhasanexternalclutch,thewinch is mounted using a small bar and chain which is included.
This saw and winch combination weighs 47 lbs and is 33incheslong.ThepowerheadisaHusqvarna365which has a 65cc engine. Also shown is the tri-sided handknob.Thisknobisusedtodisengagethewinchfor free-wheeling.
The price includes 150' of 3/16" aircraft cable, so all you need is a spare powerhead. Assembly, installa-tion on your saw, or spooling the cable onto the reel is extra. This is a job you can probably do yourself, but if you would like help setting it up for the first time, we simply charge for the amount of shop time required.
A Tree Saver Winch Strap is $6250.ASnatchBlockis$6950.
Master Page l
“The Pro’s Choice” 87
Chain Saw Attachments l
“The Pro’s Choice” 87
The Log Wizard is an excellent farm or construction tool. It can be attached to almost any size or model chain saw. When attached to your saw, it can be used as a debarker, router, notcher, or planer. A Log Wizard is an essential tool for pole barn construction, for fencing, or for log home building. It is unbeat-able for smoothing knots or fitting beams. The price does not include the saw, bar, or chain. Made in Canada.
Log Wizard
A SIMPSON CAPSTAN ROPE WINCH is a great tool for hauling, dragging, or lifting. It turns any small chain saw into a rope-pulling machine. Rope isn't as strong as cable, but it is flexible, light-weight and safer to use. Rope is usually more readily available and can be knotted or tied. With a capstan style winch, you're not limited to the length of cable that a drum will hold. Drum type winches also lose pull-ing power as the drum fills with cable - not the case with a capstan winch.
Chain Saw Rope Winch
List Price 24900
MADSEN’S PRICE
19950
MADSEN’S PRICE84900
The LOG WIZARD has ball bearings on the rotor for long life and uses standard 3 1/4" planer blades for easy replacement. It comes with a universal spline that can accommodate any pitch sprocket. To install it on a saw, simply fit it up, drill two mount-ing holes in the bar, and fit up a chain. A slightly longer chain is required to drive the rotor.
A Simpson winch weighs only nine pounds and easily attaches to most small chain saw powerheads. With a three cubic inch saw engine the winch will achieve its maximum pull of about 2000 lbs. The price does not include rope or powerhead.
To installaSimpsonwinchonachainsawpowerhead,simply remove thecuttingattachment from the powerhead and bolt the winch in its place. An adapter and cut-terless chain are supplied to replace the saw's cutter chain and bar. Two wing nuts secure the adapter and saw to the winch. That's all there is to it.
A 300’ roll of 5/16” double braided rope with 4200 lb tensile strength is $15900.
Chain Saw Guide Bars
Call (360)736-1336 24 hours88
Stihl® 361-660 20_RNDD025 20" Painted Pwr Mtch .050" or .063” 6688 5050
24_RNDD025 24" Painted Pwr Mtch .050" or .063” 8202 6150
28_RNDD025 28" Painted Pwr Mtch .050" or .063” 9444 6850
28_RWDD025 28" Reduced Weight .050" or .063” 15698 13850
30_RNDD025 30" Painted Pwr Mtch .050" or .063” 10069 7250
32_RNDD025 32" Painted Pwr Mtch .050" or .063” 10662 7550
323PMDD025 32" Polished Power Match .063" 12477 8950
32_RWDD025 32" Reduced Weight .050" or .063” 16907 14850
343RNDD025 34" Painted Power Match .063" 11258 8050
343RWDD025 34" Reduced Weight PM .063" 17308 15250
363RNDD025 36" Painted Power Match .063" 11559 8250
363RWDD025 36" Reduced Weight PM .063" 17555 15550
423RNDD025 42" Painted Power Match .063" 13397 9550
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
ST-2863 28" Superbar .063” 14084 12750
ST-3263 32" Superbar .063” 15486 13750
ST-3463 34" Superbar .063" 16225 14650
ST-3663 36" Superbar .063" 17457 15450
ST-4163 41" Superbar .063" 22494 19750
ST-5063 50" Superbar .063" 34667 30950
For Saw Type Part# Length Description Gauge List MADSEN’S
Listed are our most popular bars for STIHL® and HUSQVARNA® chain saws. Please call if the you need a bar that is not listed. These prices reflect our cost at printing time, actual prices may vary. Also, we offer discounts on box quantities. Call for prices and more info.
Pro Chain Saw Guide Bars
Slot Width: 12.1 mm or .425”
Chain Saw Guide Bars l
“The Pro’s Choice” 89
For Saw Type Part# Length Description Gauge List MADSEN’S
Stihl® 075-880 SB-3363 33" Superbar .063" 16225 14620
SB-3663 36" Superbar .063" 17457 15450
SB-4163 41" Superbar .063" 22141 19750
SB-5063 50" Superbar .063" 34667 30950
SB-6063 60" Superbar .063" 41671 37950
SB-7263 72" Superbar .063" 48905 43950
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Husky 372-3120 200RNDD009 20" Painted Power Match .050" 6688 5050
24_RNDD009 24" Painted Pwr Mtch .050" or .063 8202 6150
28_RNDD009 28" Painted Pwr Mtch .050" or .063 9444 6850
28_RWDD009 28" Reduced Weight .050" or .063 15698 13850
300RNDD009 30" Painted Power Match .050" 10069 7250
32_RNDD009 32" Painted Pwr Mtch .050" or .063 10662 7550
32_RWDD009 32" Reduced Weight .050" or .063 16907 14850
343RNDD009 34" Painted Power Match .063" 11258 8050
363RNDD009 36" Painted Power Match .063" 11559 8250
363RWDD009 36" Reduced Weight PM .063" 17555 15550
423RNDD009 42" Painted Power Match .063" 13397 9550
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
HU-2863 28" Superbar .063” 14084 12750
HU-3063 30" Superbar .063” 14685 13250
HU-3263 32" Superbar .063” 15486 13750
HU-3363 34" Superbar .063" 16225 14650
HU-3663 36" Superbar .063" 17457 15450
HU-4263 42" Superbar .063" 22494 19750
HU-5063 50" Superbar .063" 34667 30950
HU-6063 60" Superbar .063" 41671 37950
72"&84"CannonbarsforbigHuskysawsareavailable.Callforprice.
Slot Width: 14 mm or .553”
Slot Width: 9.0 mm or .375”
Replacement Bar Noses
Call (360)736-1336 24 hours90
MADSEN'S PRICE Type Style Pitch 1-5ea 6+ea
We carry a full line of REPLACEMENT NOSES for your guide bars. Below are our popular sellers. We also carry other brands and types not listed here. If you don't see the tip you need, please call. Our inventory includes many obsolete and hard-to-find items.
Replacement Sprocket Noses
Rivets for securing the tip to the bar are included with the replacement tips listed above. If you need extra rivets, let us know. We carry a full inventory of most styles. Please specify the type of bar tip.
Bar Tip Grease Gun
Small tub of grease (1 lb) 395List Price 1395
MADSEN’S 865
Some bar noses come with lubrication holes. This allows you to grease the nose bear-ing with a BAR NOSE GREASE GUN. This gun is palm operated and features a spe-cial needle tip. The gun is filled by packing with a high quality bearing grease.
For Harvester Bar
For Harvester Bar
3/8" or .404" 1595 1495
.3/8" or .404" 1395 1295
3/8" or .404" 1495 1395
.404" 1995 1895
#537245
3/4" 9995 9495
#40603
Harvester Bars & Chain l
“The Pro’s Choice” 91
IMPORTANT INFORMATION - WARNING• All chain listed above is for harvesting machines only and should NOT be used on a hand-held chain saw in any conditions. It is too aggressive, has a high-kickback rating, and too dangerous for hand-held use. This includes experienced professional saw users.
#11H 3/4" .122" micro-chisel round standard #11BC 3/4" .122" chipper round standard #18HX .404" .080" micro round standard
Harvester Bars
Harvester ChainWe carry a full line of harvester chain. Call us for a price or if you need a chain not listed here.
Brand Length Part# LinkCount Gauge Pitch List MADSEN’S
Oregon® 19" 592RHFL104 69 .080 .404 8005 7450
Oregon® 21" 642RHFL114 74 .080 .404 8255 7650
Oregon® 25" 752RHFL114 85 .080 .404 8971 8350
Oregon® 25" 752RHFN114 85 .080 .404 8971 8350
Oregon® 28" 822RHFL149 93 .080 .404 9810 9250
Oregon® 30" 902RHFL114 104 .080 .404 10431 9750
Oregon® 341SNCT043 55 .122 3/4 38097 33900
Oregon® 361SNCT043 57 .122 3/4 39093 34900
Oregon® 381SNCT043 60 .122 3/4 39322 35900
Oregon® 431SNCT043 66 .122 3/4 42284 37900
Allharvesterbarslistedhavereplaceablesprocketnoses
We carry a full line of harvester bars to fit popular harvesting machines, including bars not listed here. Call for more information if you don't see the bar you need. Also, call for a quote if you are ordering five or more bars. We offer discounts on purchases of box quantities.
Type Pitch Gauge Tooth Cutter Sequence Price#
Call fora Price
Info on Saw Chain
Call (360)736-1336 24 hours92
Chain Loop Pricing. If you prefer to buy chain by the loop, ask about our two-for-the-price-of-one deal. With this deal, you get two loops for one price. If you need two different chains, pay the two-for-one price for the most expensive one and get the second one free. We offer this on most saw chain, even harvester chain. Even long chains qualify. Need a couple chains for your 60" bar? No problem. Just ask for the two-for-one deal and save.
Chain Loops at Bulk Pricing. Buying chain by the roll saves money. The problem with bulk chain is you may not have the tools for cut-ting and splicing - and if you have he tools, you not have the time to cut and splice. Whatever the case, we can help. If you like bulk prices, but prefer to get looped chain, we will cut them for you from your roll for $2.50 per loop on most types. You can't beat a deal like this. One thing to remember is when we cut bulk chain into loops for you, the chain is not returnable, so be sure you tell us the cor-rect link count for the loops you want when you order.
Chain Reel Pricing. We don't print prices in this guide because chain prices fluctuate. We've been buying chain for years and have learned to buy a ton of it when the price is low. When we make a good buy on chain, we pass the savings to you. So keep an eye out for one of our sale flyers in your mail box. Also, watch for our ads in Logger's World Magazine. Need to know the price today? Give us a call.... You’ll be glad you did.
Service. MADSEN’S specializes in the needs of professional chain saw users. We can help you select, maintain, and maximize the performance of your professional saw chain. We are chisel chain experts and can help you set up your grinder or answer your questions about high performance saw chain. We are also available to answer questions about saw chain safety, kickback ratings, and so on. Give us a call or stop in. We are always happy to help.
MADSEN’S is the larg-est Oregon® dealer for square-ground profes-sional saw chain in North America. Our volume allows us to keep a large inventory of chain, which insures we have the style you need, when you need it. Better yet - our buying power allows us to maintain the most com-petitive prices in the industry.
#91VXL 3/8" Low .050" semi-chisel round standard 30 to 35cc 14" arborist saw #95VPX .325" .050" semi-chisel round standard 30 to 35cc 14" arborist saw #20LPX .325" .050" chisel round standard 45 to 55cc 16" to 20" #22LPX .325" .063" chisel round standard 45 to 55cc 16" to 20" #72DPX 3/8" .050" semi-chisel round standard 65 to 100cc less than 32" #72LPX 3/8" .050" chisel round standard 65 to 100cc less than 32" #72LGX 3/8" .050" chisel round standard 65 to 100cc less than 32" #72JGX 3/8" .050" chisel round full-skip 65to100cc 28”to36" #72JPX 3/8" .050" chisel round fullskip 65to100cc 28”to36" #72CL 3/8" .050" chisel square standard 65to100cc lessthan32" #72CK 3/8" .050" chisel square semi-skip 65to100cc lessthan32" #72CJ 3/8" .050" chisel square full-skip 65to100cc 28”to36" #75DPX 3/8" .063" semi-chisel round standard 65 to 100cc less than 32" #75JGX 3/8" .063" chisel round full-skip 65to100cc 28"to36" #75CL 3/8" .063" chisel square standard 65to100cc lessthan32" #75CK 3/8" .063" chisel square semi-skip 65to100cc 28"to36" #75CJ 3/8" .063" chisel square full-skip 65to100cc 28"to36" #27AX .404" .063" micro-chisel round full-skip 80to120cc 32"andup" #68CL .404" .063" chisel square standard 80to120cc 28"to36" #68CJ .404" .063" chisel square full-skip 80to120cc 32"andup
Pro Saw Chain l
“The Pro’s Choice” 93
Chain Pitch Gauge Tooth Cutter Chain Best Saw Best Saw Type Type Grind Configuration Engine Size Bar Length
IMPORTANT INFORMATION - WARNING• All saw chain listed above should only be used by experienced chain saw professionals with experi-ence and special training for dealing with kickback. Professional saw chain is aggressive and has a high kickback rating. None of it is ANSI approved for use on saws less than 3.8 cubic inches (62 cc). • Chains and bars designed to minimize kickback are available. These meet ANSI standards and should be used on saws with engines less than 3.8 cubic inches (62 cc) or on any saw that is consumer directed (nonprofessional use). Please contact us for more information.
The listings below for best engine size and best bar length are only general suggestions. What really mat-ters is your application, which may call for a different size or type. Please call for more information or if you have questions. Professional saw chain is our business. We can help.
Professional Saw Chain
Chain Repair Tools
Call (360)736-1336 24 hours94
Break-N-MendThe BREAK-N-MEND is a handy tool for doing chain repairs on the job. When you carry this tool in the crew bus, you can repair or shorten saw chain right in the field.
It is also handy for making up new chains from a reel. No work bench or extra tools are required. Its adjustable anvil section and spinner head will accommodate saw chain from 1⁄4” to .404” pitch.
Chain BreakerThe POCKET CHAIN BREAKER is our least expensive chain breaker. This punch and anvil set is a must for every home saw repair bench.
The anvil has a number of slots for accommodat-ing 1⁄4”, low profile 3⁄8”, .325”, 3⁄8”. and .404” pitch saw chain. The anvil must be used on a solid sur-face. A hammer is also required.If you have a bench grinder, it is helpful to remove part of the rivet head prior to punching with this tool. This makes it much easier to punch out the rivets.
Bench Mount Chain Breaker
The BENCH MOUNT CHAIN BREAKER is what we use to break chain in our shop. It works on most sizes of saw chain from 1⁄4” to .404” pitch, including harvester chain.
Bench Mount Rivet Spinner
The BENCH MOUNT RIVET SPINNER is used to join saw chain. The spinner makes a strong joint by shaping rivet heads on pre-set tie straps. Included is the spinning head necessary for rivet-ing most types of 3⁄8” pitch saw chain. Ask about other chain sizes.
This is a complimentary tool to the bench mount chain breaker shown on the left.
List Price 5895
MADSEN’S 4695
List Price 1795
MADSEN’S 1165
List Price 8395
MADSEN’S 5995
Replacement Punch Bit
Old StyleNew Style Old StyleNew Style
List Price 8395
MADSEN’S 5995
Replacement Spinner Bit
550 1095 550 835
Mount this on your work bench and mark the link counts you cut most often. If you make up a lot of chains or do a lot of repairing, you will wonder how you ever got along without it.
Item# 26889Item# 38597Item# 26870Item# 38594
Chain Sharpening Tools l
“The Pro’s Choice” 95
Clamp-on Filing Guide
12 Volt Electric Chain Sharpener
The ELECTRIC SAW CHAIN SHARPENER offers speed and convenience. This 12 volt grinder is meant to be attached to a car, truck, or ATV battery for easy chain sharpening in the field. Bit sizes are available in 5⁄32”, 3⁄16”, 7⁄32”, and 1⁄4”. Item# 28588
With the PROFESSIONAL FILE GUIDE, you don’t have to remove the saw chain from the bar to sharpen it. With a few twists of the thumb screw, this guide clamps on the cutting attachment and accurately holds filing angles you select. It is adjust-able on each axis and will fit file sizes from 5⁄32" to 7⁄32". A file is not included. Item# 557849
List Price 5496
MADSEN’S 3595
List Price 8188
MADSEN’S 5895
Extra Grinding Bits 345
Round File Guide
The FILE GUIDE helps maintain the optimum sharpening angles when hand filing. It is espe-cially helpful in keeping the file at the correct height. The guide is good for both a beginner or experienced filer who touches up his chain in the field. Each guide comes with a file. Please specify size when purchasing: 7/32", 3/16", or 5/32".
List Price 1339
MADSEN’S 995
Depth Gauge Filing Tool
You know how important it is to have a smooth, fast cutting chain. It's also important that the chain cut straight. All of this is impossible if the rakers are not properly maintained.
The PRESET RAKER GAUGE helps you file your rakers to the correct height. It is available in .025" or .030”
List Price 400
MADSEN’S 275
Chain & Bar Tools
Call (360)736-1336 24 hours96
MADSEN’S
2995
The SILVEY BRC works quickly and easily on worn or spread bar rails. It's fully adjustable and will work on bars of any size. The heavy duty ball bearings used on the BRC insure accu-racy and long wear. Made in the USA.
110v Electric Saw Chain Grinder
The grinder comes boxed and ready to assemble. Once assembled, it easily bolts to a bench or stand and plugs into a standard 110v outlet. .
The ELECTRIC SAW CHAIN GRINDER is a round chain grinder built for saw users who sharpen many chains. It is easy to use and can sharpen 1⁄4”, .325”, 3⁄8”, and .404” round saw chains. Item# 180-119.
T h e O R E G O N E L E C T R I C S AW CHAIN GRINDER is a round chain grinder built for saw users who sharpen 1 ⁄ 4” , .325”, 3⁄8”, and .404” p i t c h ro u n d s a w chains. If you are looking to sharpen 3/4" pitch harvester chain, contact us for more information.
List Price 42995
MADSEN’S 33900
List Price 61695
MADSEN’S 39900
Grinders & Tree Jacks Parts & Service
At this time, Silvey is not producing new grind-ers or tree jacks. However, they are still produc-ing parts, and Madsen's has a good inventory of them. So if you need parts or repair on a Silvey product, contact us.
Bar Rail Closer
110v Electric Saw Chain Grinder
For an additional $39.95 we will assemble this grinder and give you up to one hour of personal instruction in our shop on how to use it. This is sug-gested if you are new to grinding saw chain.
Item# 180-119
Item# 520-120
Master Page l
“The Pro’s Choice” 97
The Simington S451-C is a square-chisel chain grinder suitable for both an experienced grinder operator or a beginner. This grinder is based on a simple swing-arm design, which makes it easy to use, adjust, and maintain.
It is also time-tested. Some grinders, still in use today, have been sharpening saw chain for over thirty years. Today's S451-C is the newest gener-ation of this popular machine.
Its features include:
• Adjustable cutter-tooth sharpening angles• Reversible fan-cooled 110v motor• Carbide-tipped tooth locator• Two diamond-tipped wheel dressers• Die-cast aluminum chassis and swing-arm• Flex-mounted work light with standard socket• Three-point adjustable tripod stand included• Made in U.S.A.
List Price 107995
MADSEN’S 99900
Simington Square Chisel Chain Grinder l
Above: Aligning the corner in the grinding wheel with the corner in the cutter tooth is one of the se-cretstoproducingwellsharpenedsquare-groundcutter teeth. The level of precision necessary to maintain this alignmentwith a hand file is diffi-culttoachieve.Withagrinderitiseasy,andthisis one reason professional saw users sharpen squarechiselchainwithagrinder.
Above:Adjuster#1changesthegrindangletokeepfrom cutting into the chain's chassis under the hood of the cutter. Adjuster #2 changes the inside side-plate angle by lengthening (or shortening) the arm's swing. Additional angle adjustments can be made by changing theshapeof thegrindingwheel,which isaccomplished by changing the paths of the two dia-monddressers,whicharealsoadjustable.
Simington Chisel Chain Grinder
Simington S451-C Square-Chisel Chain Grinder
#1 #2
Master Page
Call (360)736-1336 24 hours98
Fire Pump
These grinding wheels are for sharpening square-ground chisel saw chain. The characteristics listed represent the collective opinion of our customers and staff. All wheels are 8" X 1" X 3/16". If your grinder does not have a 1" arbor, see the listing for adapter bush-ings on the next page.
MADSEN’S PRICE Part Color Hard/Soft Bond Bond Type Grit Size 1-9 ea 10+ eaGrinding Wheels for Chisel Grinders:#M21 grey medium-soft vitrified 120 1795 1650
•Thiswheeldresseseasilyandremovesmaterialquickly.Itdoesn’tholditsshapeaswellasharderwheels,butItremainsoneofourbestsellingwheels.
#M21W grey waxed medium-soft vitrified 120 1895 1750
•Thiswheelissimilartothewheelabove,butitisimpregnatedwithwaxforlubricationandcoolgrinding.Likethewheelabove,itproducesagoodfinishoncutterteeth,butitisnotaspopular.
#M47 salmon medium vitrified 100 1795 1650
•Thiswheelshapesandfinishescutterteethwell.Itdoesn’tremovematerialasfastassofterwheelsabove. It is also one of our best selling wheels.
#M50 white medium vitrified 100 1795 1650
•Thiswheelissimilartothewheelabove.Somegrinderoperatorssayitswhitecolormakesiteasierforthemtoseethecornerinthewheel,whichimprovestheirabilitytoaligncorners.
#M49 brown medium resinoid 80 1895 1750
•Thiswheelremovesmaterialeasilyandquickly,howeveritdoesn’tfinishorshapeaswellasothers.Itisagoodwheelifyouhavetogrindalotofchainseachnightorifyouregularlysharpenrockedchains.
#M99 blue medium vitrified 100 3995 3650
•Thisisouronlyceramicblendwheel.Itkeepsitsshapeandfinishescutterteethverywell.Itisanexcel-lentwheelandmanygrinderoperatorspreferit,butitisalsothemostexpensive.
Grinding Wheels for Chisel Chain Grinders
Grinder Accessories
regularsocketlightbulbs 250 195
tube grinding wheel wax 1295 1050
single-point diamond tipped dresser 3495 2895
multi-point diamond tipped dresser 3495 2895
wheeldressingbrick 2550 1795
Part Description List MADSEN’S
Files l
“The Pro’s Choice” 99
MADSEN’S PRICE Part Description Bond 1-9 ea 10+ ea
The Nielsen, Bell, Stihl, and some other grinders have a 1⁄2" arbor. Most of the wheels listed on these pages have a 1" diameter arbor hole. A bushing is necessary to use one of these wheels on a grinder with 1⁄2" arbor. Cost is only $2 and it is reusable.
Grinding Wheels for Round Grinders:#M45 for most round grinders vitrified 1795 1650
•Thiswheelis6"X1"X3/16".Itworksformost.325”,3/8”and.404”pitchroundchain.Itisacoarsegrit wheel and will remove dull material with minimal burning.
#M32 for most round grinders vitrified 1795 1650
•Thiswheelissimilartothewheelabove,butsized6"X1"X1/8".Thisthinnerwheelworksformostlowprofile 3/8” and 1/4” pitch round chain.
#M316 for an OREGON or EFCO round grinder vitrified 1595 1450
•Thiswheelis53/4”X7/8”X3/16”,thebestsizeforsharpening3/8”chainonthesegrinders.Wealsostockthemin1/8”,1/4”and5/16”forsharpeningothersizechains.Pleasecallformoreinformation.
#M832 for a SILVEY 510 round grinder resinoid 1895 1750
•Thiswheelis5/32”thick,agoodsizeforsharpening3/8”chainonthisgrinder.Wealsocarrythesein1/8”thicknessforsharpeninglowprofile3/8”chainand.325”.Pleasecallformoreinformation.
#M49 for a SILVEY 510 round grinder resinoid 1895 1750
•Thiswheelis8"X1"X3/16".Itworksgreatforgrinding3/8”or.404”pitchroundsawchainor.404”harvester chain. ItalsoworksontheSILVEY#510-080harvesterchaingrinder.
#M516 foraSILVEYP&Dgrinder resinoid 2695 2550
•Similarwheeltothe#M49,but5/16"thick,thebestsizeforsharpening3/4"pitchchain;Itisgoodforsharpeningchainforbothpond&decksawsorfor3/4"pitchharvesters.
Grinding Wheels for Depth Gauge Grinders:#SG6 for a SILVEY HDG-6 resinoid 1595 1450
•ThiswheelismadeespeciallyfortheHDG-6grinder.It'ssizeis6"X1"X3/16".
Grinding Wheels for Bar Rail Grinders:
#BR312 for a SILVEY Bar Rail Grinder resinoid 1995 •ThiswheelismadeespeciallyfortheSILVEYBRGgrinder.It'saspecial3.5"cuppedwheel.
Other Grinding WheelsListed below are our best selling grinding wheels, but we carry other wheels including many Silvey OEM wheels not listed. If you have an older Silvey or Oregon chain grinder not shown, we can probably supply you with a replacement grinding wheel. Please ask for help if you need assistance choosing a wheel for your grinder.
Master Page
Call (360)736-1336 24 hours100 Call (360)736-1336 24 hours100
Chisel Grinding Wheels & Accessories
Chain Saw Files
7" premium double bevel chisel chain file
7" premium three corner chisel chain file
6" premium goofy flat chain or general purpose file
6"premiumflatrakerorriderfile
5/32",3/16",13/64",&7/32" round chain or gullet files
MADSEN’S carries premium grade files made in Europe by Viiala. Premium grade files may cost more, but they deliver excellent value because they cut well and last a long time.
MADSEN’S PRICE Size - Type - Description List Price 1-11 ea 12-35 ea 36+ ea
319 249 125 115
519 439 379 349
819 619 599 509
1219 979 879 829
1219 979 879 829
5/16"roundfilefor3/4"pitch(#11BC)P&Dorharvester
10" premium flat axe or general purpose file
8" premium flat axe or general purpose file
919 719 669 609
1095 379 279 259
125 69¢ 59¢
1229 929 829 759
HI- IMPACT PLASTIC FILE HANDLES are made to fit the small tails on most chain files. They are tough and durable because they are made by the same folks that make Double Taper falling wedges.
Master Page l
“The Pro’s Choice” 101
Pumps l
“The Pro’s Choice” 101
Fire Pump
The TOP FLOW FIRE PUMP is capable of pumping 22 gallons per minute through a 1/4" nozzle and 50' of 3/4" hose. This complies with Washington's Department of Natural Resources (DNR) and Oregon Department of Forestry (ODF) pump speci-fications for logging site fire protection.
The pump features a Honda GX270 engine. This is a 270cc commercial-grade engine with a cast-iron cyl-inder for long-life and durability. It also features a 2" NPT inlet and a 1.5" NPT outlet.
Options include a hand-primer pump and foot valve. These are necessary if the pump will be used to fill a fire tank from a creek or water source located below the level of the pump, such as when a pump is mounted to a trailer.
MADSEN’S PRICE 159995
This pump can be mounted to a tank trailer or be trans-ported on a wheeled cart or mounting plate, which are both options.
Madsen's is an authorized dealer for HONDA pumps. We carry high-pressure pumps, volume pumps, deluxe pumps, economy pumps, trash pumps, and more. Please contact us for more information.
Please read the owner’s manual before operating your Honda Power Equipment. Connection of a generator to house power requires a transfer device to avoid possible injury to power company personnel. Consult a qualified electrician.
© 2000 American Honda Motor Co. Inc.
HONDA Heavy Duty Trash Pump•CommercialOHVengine•Oilalert•Centrifugal,selfpriming•Fullframe
Master Page
Call (360)736-1336 24 hours102
HONDA Generators
Professional chain saw users often have a need for por-table electrical power. A HONDA generator is a good source for using power tools, grinders, or lights. It improves the conditions on any work site.
HONDA Generator•Built-inbatterycharger•Oilalert•Superquiet•Electronicignition
What type generator is best?HONDA generators come in many sizes and styles. It can be confusing to choose one. Here are some things to consider:
• Buy one that's a little bigger than you currently need. While weight and cost are important factors, there is no-such-thing as too much power.
• Make sure it has the features you need. If you end up buying a less expensive, but louder unit and run in a campground, your neighbors won't like you. Spending a little extra to get a quiet model with more features gives you additional flexibility.
If you need portable electrical power, a HONDA generator is the best solution. HONDA generators are quiet and efficient. Best of all, they are also reli-able and easy-to-start.
What are watts?Most generators are rated by the maximum amount of power or watts they can produce. HONDA generators show this in their model number. For example, an EU1000 will pro-duce a maximum of 1000 watts.
• What are watts? Watts are: Volts X Amps. In other words, 110 volts X 4 amps = 440 watts. So if you don’t know how much power a particular appliance requires, look in the owner’s manual for the amps it needs to run. Sometimes this information can also be found on a tag on the unit. Once you know amps and volts, you can figure watts.
• When selecting a generator, remember it's rated at its maximum output, but it will not perform at this level for long periods. Also, remember that power cords and plugs reduce the efficiency of any generator. This means if you figure you need 2500 watts, buy a 3000 watt generator.
Which size is most common?Picking a generator can be tough because there are so many choices. Here are few sug-gestions:
• Need to run a few lights? A 1000 watt model will work great. It also comes with a built-in 12 volt battery charger.• Need to also run a SILVEY® chain grinder? You'll want one that produces at least 3000 watts.• Need to power everything above including a fully equipped camp trailer with an air conditioner? Consider a 6500 watt model.
Call or stop in. We will help you choose the best generator for your application.
HONDA Generator•Oilalert•Superquiet•Fuelmeter•Automaticidle•OHVengine•Electronicignition•Heavydutypower
Master Page l
“The Pro’s Choice” 103
OREGON, a brand you know and trust, now offers three log splitters. All feature fast cycle times and have built-in cradles, which make splitting wood quick and easy. With this selec-tion, one is sure to meet your needs.
The OREGON 6-ton log splitter is portable, eco-nomical, and powered by 120V electricity. It is good for working in an enclosed space like a barn or wood-shed and can be plugged into a regular 120V wall outlet.
It has surprising power for its size and can split wood up to twenty inches in diameter. It fea-tures a separate hydraulic pump and valve, an automatic push-plate, and a built-in log cradle. Its solid wheels make it easy to move around. 120V/15 amps.
The OREGON 22-ton and 28-ton log splitters are both powered by quality HONDA engines. Both are good for use around the home or farm, yet are powerful enough for heavy users. They both utilize 24" hydraulic cylinders, have auto-return valves, and 2-stage hydraulic pumps. Both can be operated in either a horizontal or vertical position. They also come standard with stripper plates, a solid-steel foot piece, a beam lock, and a sturdy ground stand that supports the tongue when running the splitter.
The 22-ton splitter is powered by a Honda GC190 engine. The 28-ton unit is powered by a Honda GX270, a larger and commercial grade engine. This engine gives the splitter more power and reduces its cycle times, plus it offers more durability and a longer working life. The 28-ton unit also features a larger ram and taller 4.80" X 12" tires. The tires greatly improve the splitter's towing capability.
Log Splitters
6-Ton Splitter $40900
22-Ton Splitter 174900
28-Ton Splitter 249900
Log Catcher 6999
4-Way Wedge 22T 5599
4-Way Wedge 28T 5599
Coverfor22T&28T 7995
6-Ton
22-Ton
28-Ton
Item Price
Log Splitters l
Master Page
Call (360)736-1336 24 hours104
Pro Saw Performance Tips
The following information will help you learn how to sharpen square-ground saw chain with a chisel-file. Before you begin, know that square-fil-ing takes practice and patience to develop, so be prepared to work through a learning curve. Square-ground saw chain is dif-ficult to file, so don't give up if your initial efforts don't meet your expectations.
One thing that can really help you learn to square-file is guidance from a mentor. If someone on your crew square-files, and his chains cut well, become his friend. Having hands-on help from someone with filing experience can shorten the learning curve. But, be careful who you select for a teacher. Don't allow a "so-called" expert confuse you with misinformation. Only accept guidance from someone whose own hand-filed chain performs well.
Types Of Files
Before you get started, you need to acquire a chisel-file or
two. There are several types available. The most popular is the hexagonal or "triangular" chisel file as it is more com-monly known. It does actually have six sides, but only three "corners" or filing edges. Other file choices include the double-bevel chisel-file and another called a "goofy" file. Both have just two corners for sharpening, but also have additional wide flat surfaces that can be used for lowering depth-gauges.
If you are not sure what file to start with, our advice is to start with a triangular file. It is the smallest file and fits best into the throat of most 3/8" pitch cutter-teeth. Since it has three corners, it will also sharpen more cutter-teeth before it wears out than either the double-bevel or goofy file. Later on, you might try one of these. Since they are dual-pur-pose, they are good for carrying in your pack because you can do a lot of chain maintenance with just one file.
For clarity, depth gauge maintenance is not done at the
same time chisel cutter-teeth are being sharpened. It is often done in conjunction with cutter-teeth sharpening, but always done in a second operation. There is no square-file that can sharpen and cut depth gauges at the same time.
Getting Set Up to File
If you have a shop or garage area with a work-bench and a vise, this is a good place to sharpen for the first time. Clamp your saw and its guide-bar in the vise. If you have a work light, position it on the cutter-teeth. Square-filing is often done in the field, but it is best to learn in conditions with good light and stable cutter-teeth.
Next, select a dull square-ground chain that has never been resharpened. If you start with a chain that has been
How to Sharpen Oregon Square-Ground Saw Chain with a Chisel File
Shownisatriangularchiselfilebeingusedtosharpensquare-groundchiselsaw chain.
The image above shows a double-bevel chisel-file sharpening a square-ground cutter-tooth fromthe rear. The image below shows the same from a side perspective.
Master Page l
“The Pro’s Choice” 105
Pro Saw Performance Tips l
resharpened, it may have gullet material on its cutter-teeth that gets in the way of your file. Yes, this gullet material can be removed, but since you are new to this, this is a step to avoid because you already have plenty to learn. The other bene-fit of starting with a chain that still has a factory grind is you have the manufacturer's origi-nal shape and angles to follow.
It is also helpful to have a second new and unused square-chisel chain to look at. This chain should be brand-new with factory-ground cutter-teeth. If you have a question or doubt about what you are trying to accomplish, you will have this chain to refer to.
Filing Cutting Direction
You will notice in the illus-trations that the file is posi-tioned so it cuts going "into" the cutter-tooth. There are a few people who prefer to file in the other direction and this is OK. They do this so the hard chrome is "lifted" from the cutter-tooth and not driven into the file. They argue this method helps preserve expensive square-files. In practice, most filers cut going "into" the tooth. This is the direct ion we recommend because it cuts the cleanest edge on the cutter's chrome plating.
The Rules
Before you begin, here is a summary of what you need to do: 1) The corner of the file must be aligned with the corner in the chain's cutter-tooth. 2) Along with corner alignment, sharpening angles in the cutter-tooth must be maintained. 3) All the dull material needs to be removed. 4) Your results must be duplicated on every cutter-tooth.
Square Filing The First Time
Begin by placing your chisel-file in the face of a cutter-tooth. Determine which corner in the file will align with the corner in the cutter-tooth. The photos and illustrations here should help you do this.
Once the corners are aligned, position the file on its other axis so the surfaces on the cutter-tooth match up to the file
surfaces. Once everything is ready, take a few strokes with the file. Next, remove the file and examine the cutter-tooth. You will see marks where the file has taken away steel. Make adjustments to your file stroke based on what you see. Proceed to sharpen the tooth until it has a sharp corner and looks similar to a new tooth on your refer-ence chain.
When learning to sharpen any chain (even round), it is important to know what a sharp tooth looks like. If you don't have an image in your mind of what you are trying to accom-plish, you won't have good results. Some round-filers get by without really knowing what they are after, but this won't work for square-filers.
One telltale sign of a filer's level of sharpening experience is how he determines if his chain is sharp. An experienced filer doesn't feel the corner of of a cutter-tooth with his thumb. He determines if it is sharp just by looking at it. The point here is: Learn what a sharp tooth looks like. Your eyes can be trained to tell you more than your thumb.
Corner to Corner Alignment
A big part of learning a new skill is learning what is essen-tial. In the case of square-filing, corner alignment is that essen-tial. Aligning the corner in the file with the outside corner in the cutter-tooth is the single most important objective. If you don't retain anything else written on these pages, remem-ber this.
continued on page 106
Thereareseveraldifferenttypesoffilesusedforsharpeningsquare-groundsaw chain. Shown here is the triangular chisel file and the double-bevel chisel file.
A chisel cutter-tooth is usually sharpened with the file cutting while goingintothecutter-tooth,althoughfiling in the other direction is also acceptable.
Master Page
Call (360)736-1336 24 hours106
Pro Saw Performance Tips
Call (360)736-1336 24 hours106
Unfortunately, there is mis-information out there that some people try to follow. It contends that the outside corner in the cutter-tooth, the inside corner in the cutter-tooth, and the corner in the file all need to align. This is not true. The only corners that must align are the outside corner of the cutter-tooth and the corner in the file. Now, if the corner on the file happens to align with the inside corner of the cutter tooth this is OK -- it is just not necessary. The point here is: The corners to
focus on is the outside corner of the cutter-tooth and the corner in the file.
Duplicating Sharp Cutter-Teeth
Congratulations, you have produced one sharp cutter-tooth. It is now necessary to duplicate what you have done on the rest of your saw chain's cutter-teeth. If you were using a square-grinder, this would be easy because you would now set the stops on your grinder (which limit travel) and you would be duplicating square-ground cutter-teeth with ease. With a file, it is more difficult because you have no stops to set. You must learn to do this by eye or with the aid of mea-suring tools.
Some people count file strokes to quantify how much cutter-tooth material they remove. While this is better than nothing, it is not an accu-rate way to measure because each file stroke does not remove the same amount of material.
Right-handed filers find it is easiest to sharpen left-hand cutter-teeth. If you are left-handed, the opposite is true. Whatever the case, all file strokes are not equal and you must compensate for this. Do your best to make each tooth identical. Also, know that
duplicating cutter-teeth is diffi-cult for even the most accom-plished square-filers.
All cutter-teeth need to be identical, because when they are not, each takes a different sized bite of wood. This causes a chain to chatter and vibrate. In addition, uneven cutter-teeth can cause a saw to cut crooked. Here's why: If you add up all the chips taken by the cutter-teeth on the left and compare them to those taken by the right, they must be the same. If they are not, the cut will "pull" to the side with the teeth that remove the most wood.
Beaking
A few paragraphs ago you read how important corner alignment was. The following may seem like a contradiction at first, but read on and you will learn a filing "secret." The rule is: Align the corner of the file with the corner in the cutter-tooth, but if you are going to be off, (here's the secret) be low.
No human is perfect. This is especially true when "square" filing. So instead of trying for a perfect corner, aim a little low. Yes, you will create a small "side-beak" in many teeth, but cutters sharpened with a slight side-beak will still perform pretty well. If you aim for per-
continued from page 105
Shownisasquare-filedcutter-toothwith a well aligned outside corner. This cutter will perform well. Notice that the file's corner was aligned with the cutter-tooth's outside corner,butnottheinsidecorner.
It is important that each sharp cutter tooth be the same on a saw chain. A chain with cutter-teeth filed at different angles and at different lengths will chatter and may not cut straight.
Corner alignment is the most important aspect of sharpening square-groundsawchain.Acornerof a chisel file should be aligned with plane (A) and point (B) the corner of the cutter-tooth. Contrary towhatsomemaytellyou,itisnotnecessary to align with the inside corner. See the image below.
Master Page l
“The Pro’s Choice” 107
Pro Saw Performance Tips l
“The Pro’s Choice” 107
continued on page 108
fection and end up with high corners on some teeth (a top beak), your chain won't cut worth a darn. So, whatever margin of error you need to allow, make sure you never create cutter-teeth with top beaks.
Yes, there is a down side to creating cutter-teeth with small side-beaks and that is some loss in a chain's stay-sharp ability. This is because beaked corners are not as durable and those with perfect corners. They don't have as much support. This explains why filed chain often has less stay-sharp ability than chain that is ground. Most grinder operators can produce nearly perfect cutter-teeth because it is easy to get and keep corner alignment.
Square Grinding vs. Square Filing
The challenge of position-ing the corner of the file in the corner of the cutter-tooth, hold-ing the correct angles, and doing all of this while moving the file is difficult. Some describe it as "dent is t level " prec is ion . Sharpening with a square
performance because they lift a cutter-tooth away from the wood. When a cutter-tooth can't get to the wood, it doesn't perform as well. The longer gullets get, the more they impact cutting performance. Fortunately, gullets are easy to remove with a round file. If you have access to a round chain grinder, this is an even easier way.
Another problem with gul-lets is they can make it impossi-ble position a file correctly in the face of a cutter-tooth. This often occurs when you are trying to file a chain that was
grinder is easier because the grinder holds both the cutter-tooth and the grinding wheel in place (once it is adjusted cor-rectly). It also helps you dupli-cate cutter-teeth. Stops limit travel, so its easy to duplicate the results of the first sharp cut-ter-tooth on all the rest. These advantages are why most users who sharpen with a square-grinder produce chains that perform well.
Gullets
If you sharpen saw chain with a round grinder or round file, you may have never heard of a gullet before. The reason is this material is removed during regular sharpening. But with a square-ground cutter-tooth, a gullets forms from "left over" material left in the lower por-tion of a cutter-tooth after it is sharpened. This material must be removed in a second opera-tion. Many pro saw users do not do this often enough because they don't realize how important it is.
All cutter-teeth have built in "set." If you look at a cutter-tooth with a long gullet from the top down, you may see the gullet extending beyond the working corner of the cutter-tooth. Long gullets hurt cutting
Shown is a cutter tooth with a side-beak.Noticethecornerisfiledlowin the tooth causing a shape in the upper part that looks like a bird'sbeak. Almost all square-filers pro-ducea side-beaked tooth becausea top-beaked toothwon't performwell and perfect corner alignment is difficult to achieve.
A grinder that is properly set up holds the angles for you. It is also easier to maintain proper corner alignment.
As you can see from this perspec-tive,alonggulletcangetinthewayof the cutter-tooth's sharp corner.
The arrow points to a long gullet that needs to be removed. This gullet should be no longer than 1/8".
Inthisimage,thegulletmaterialhasbeen removed. Some users prefer to leave a small gullet, and this isacceptable.
Master Page
Call (360)736-1336 24 hours108
Pro Saw Performance Tips
Call (360)736-1336 24 hours108
previously sharpened on a square-grinder. When this hap-pens it is necessary to remove the gullets before you can resharpen a chain's cutter-teeth.
Depth Gauges
Having well sharpened cut-ter-teeth is important, but a chain won't perform well unless its depth gauges are also set correctly. Unlike gullets, which are often not cut enough, many pro saw users cut depth gauges too much. This is usually done to compensate for teeth that are poorly filed, but this is a bad practice. Saw chain with low depth gauges doesn't perform well and is more dangerous to operate. On most OREGON saw chain, the recommended setting is stamped right on the depth gauge, so its easy to find if you don't remember it.
Our Advice
• Learn to sharpen saw chain with a round file before you try your hand at square-filing. Square or chisel-filing requires much more skill and precision, but the round-filing experience provides good basic skills. Once you can sharpen well with a round file, then try square-fil-ing.
• If you do most of your sharp-ening with a square-file, con-sider having someone grind your chains after every two or three filings. A machine grind done by a capable operator will restore the correct angles, corner alignment, and tooth lengths. This makes the chain much easier to resharpen with a square-file.
• If you occasionally sharpen your filed chains with a square grinder (as we suggest), make sure the grinder operator does not over-heat your chain's cut-ter-teeth. Inexperienced or sloppy grinder operators some-times burn cutter-teeth. Over-heating damages the teeth and usually makes them super-hard. This makes them nearly impos-sible to sharpen with a file.
• You will never become so good at square-filing that you won't want or need a square-grinder. One good thing that comes with square-filing expe-rience is you learn what well-sharpened square-ground cut-ter-teeth look like. So even if you don't master the skill of hand-filing, the effort is not wasted because the experience will reduce the learning curve associated with learning to use a square-grinder.
• Many pro saw users who square-file, don't do it well. Most don't realize (or admit) the kind of cutting performance they would enjoy if their chains were sharpened properly. So, if you find that square-filing is not for you AND you don't see yourself getting a square-grinder, don't keep doing it. Instead, sharpen your chain with a round-file. No, your chain won't perform as well as
continued from page 107 it did when it was square-ground, but it will cut better than a poorly sharpened square-filed chain. Round-filing is much easier to do effectively. Plus, the files are less expen-sive.
Conclusion
For more information on how to get top performance from your saw's bar and chain, ask us to include a free OREGON Maintenance and Safety Manual in your next order. This seventy-five page manual is filled with all kinds of useful information on your saw's bar, chain, and drive sprocket. In it is more informa-tion that we don't have room to include here such as sharpening angles, depth gauge settings, and more. It is a good reference for both expert and less experi-enced pro saw users. And yes, you read it right, it's yours com-pliments of your friends at OREGON Cutting Systems.
Let us know if you have more questions. You ask, and we'll keep working on straight answers. That's why we're the Pro's Choice.
“The Pro’s Choice”
Don't forget about depth gauge maintenance and don't over-cut them tomake up for poorly filedcutter-teeth.
For more information ask us toi n c l u d e a f r e e O R E G O N Maintenance and Safety Manual in with your next order.
Summer 2015 Catalog SaleCatalog Sale Specials -- This sheet contains prices on many of the "call for price" items listed in this catalog. It also contains items that are currently priced lower than those listed in the white pages of this catalog. These sale prices are good thru September 2015, or while supplies last.
Harvester Saw Chain
100' roll of #18HX - $389.100' roll of #11BC - $622.100' roll of #11H - $622.
28" . . . . $6650
30" . . . . $7050
32" . . . . $7350
34" . . . . $7850
36" . . . . $8050
42" . . . . $9350
Bar Tips $1395
Power Match Bars for Stihl & Husky
Alaska Toll Free Order Line
1-800-822-2808
Madsen's Shop & Supply Inc. • 1408 South Gold • Centralia WA 98531 • 360-736-1336
Ask about the new 18HX harvester chain and our low prices on OREGON® har-vester bars.
Madsen's Gloves are extra thick on the palm and fingers. Their simple design offers great value because they work hard and last long. Size: Large.
White Ox gloves are made of cotton for maximum comfort and protection. Size: M, L, & XL
Reel Chain Sale
$269.
While supply lasts, any 100’ roll of OREGON® 3/8”pitch square ground chisel saw chain in stock is only:
Plus, we’ll throw in a FREE collector's ball cap with each roll you buy. This cap is cus-tom made and fea-tures our logo embroi-dered on the crown. Get yours today!
White Ox Gloves
Add 20¢ for elastic band Add 60¢ for XL size
Wonder Grip Gloves are double-coated nylon liners ideal for working in wet environments. Size: S to XXL.
Nylon Faller's Gloves have a snug fit for good dexterity. They are made of long-wearing knit-ted polyester. Size: XS to XL.
Wonder Grip GlovesNylon Fallers Gloves
99¢12+ 90¢ ea
Double FrontLogger's JeansDF Logger's Jeans feature a double layer of cotton denim in the knee and upper leg area.
$450$289
12+ $249 ea
$495
$3499
Ear PlugsT h e s a l e p r i c e includes both the classic ear plugs and the soft FX style.
Box of 200
$28.
See page #42 for the size chart and for more information.
Logger's Jeans
Hickory Shirt
Big and tall sizes are extra.
$2199
Thick Cotton Gloves
Single Front$1899
Double Front $2299
$1499For Bigs & Talls add $1.
For Bigs & Talls add $1.
T ShirtHenley
$1199
HONDA Generator
• Oil Alert engine protection• 2000 watt maximum output• Electronic circuit breaker• Super Quiet - 59 dB
Leather lace-to-toe logger’s boots with screw-in calks. A real value.
$22999
#EU2000 List $1149.95
Special Sale Price:
$927.Price & availability limited to
stock on hand.
Blaze Pro™ or Blue Ox™
Faller's Wedges
Price per Dozen
8"- $39. ($325 ea)
10"- $45. ($375 ea)
12"- $60. ($500 ea)
Shown is the Blue Ox wedge, but both are made of high impact ABS by Piller Plastics.
More Sale Specials. . . Prices good thru September, 2015, or while supplies last. Call (360) 736-1336.
Please read the owner’s manual before operating your Honda Power Equipment. Connection of a generator to house power requires a transfer device to avoid possi-ble injury to power company personnel. Consult a qualified electrician.
© 2000 American Honda Motor Co. Inc.
Logger's Jeans
BootsDELUXE chaps have 6-plies of Labonville 's unique knitted Kevlar/Polyester fabric encased in a tough Cordura nylon shell. They meet U.L. standards for pro-tection, yet are lightweight and inexpensive. See page #30 for information on fit and protection.
Deluxe Chaps
Regular
$6495Short
$6195Long
$7195XLong
$7395XXLong
$8095
Every Cannon bar is individually made by skilled craftsmen. They are made for the professional logger who recognizes and appreciates excellent quality and value.
These bars are available in 32" .063" gauge with either a STIHL or HUSKY mount. Other lengths are available. Call for more information.
$13750
32" Cannon Super Bar
Chain Grinding Wheels
Your choice of any MADSEN'S brand waxed or unwaxed chisel grind-ing wheel except for the ceramic wheel.
$1550
Sale price on the #M99 ceramic wheel is $34.50
Single Front $2499
Double Front $2899
Our entire inventory of Madsen's Logger's Jeans are on sale. We have over a thousand pair in stock!
Madsen's Hickory's are cut from a roomy pattern and made of 100% striped cotton denim.
$2499
Hickory Shirt
B i g a n d tall sizes are extra.
RomeosTake advantage of this special price on Madsen's Romeos. See the catalog list-ing for sizes.
$9999
CLEAR CREEK USA
Merino Wool Socks
$399 $499
$899
Wool Blend Socks
ThreePack
SixPack
Style #CC845 Style #NU-2
Logger's Socks
Crew Socks
$699Style #7587
These cushion socks feature a reinforced heel and toe.
These sox feature 60% Merino wool.
These high-bulk acrylic socks are our best selling socks.
Cotton blend knit. Available white or black/grey.
Style #6546