welcome to hansen products (nz) limited - a c t1 t2 bthe leveller valve is manufactured from potable...
TRANSCRIPT
42 Page | Section Thirteen - Leveller Valve - Technical Information | June 2012
Leveller Valve Dimensions
Leveller Valve Materials• Diaphragm Valve Body – Glass Fibre Reinforced Nylon• Diaphragm – Nitrile Rubber• Guide Bush – Glass Fibre Reinforced Nylon• Guide Retainer – Acetal• Springs – Stainless Steel• Split Pin – Stainless Steel• Valve Body Cap – Acetal• Guide Pin – Stainless Steel• Valve Body Cap Nut – Glass Fibre Reinforced Nylon• Pilot Seal – Nitrile Rubber• Leveller Float Arm – Glass Fibre Reinforced Nylon• Housing – Glass Fibre Reinforced Nylon• Roller – Acetal• Plunger Housing – Glass Fibre Reinforced Nylon• Pivot Tube – Acetal• Clamp Block – Glass Fibre Reinforced Nylon• Clamp Bolt – Stainless Steel• Cord Nut – Glass Fibre Reinforced Nylon• Cord – Polyester
The Leveller Valve is manufactured from Potable Water approved materials
Adaptors• Adaptor – Glass Fibre Reinforced Nylon• Adaptor O-Ring – Portable Water ApprovedFloat• Float – High Density Polyethylene• Thread Insert – Glass Fibre Reinforced NylonWeight• Float – High Density Polyethylene• Thread Insert – Glass Fibre Reinforced Nylon• Weight – Stainless Steel
T1BSPT (DN)
T2BSPT
amm
bmm
cmm
1” (25mm) 1 1/4” (32mm) 393 232 140
a
b
T1
T2
c
Email: [email protected]: www.hansenproducts.com