welcome togetstarted.imvpinfo.com/pdf/imvp-classroom-and-ibm-rdp...welcome to imvp setup guide for...

iMVP Classroom and IBM RDP Lab Setup Guide For Mac 1

V I R T U A L W I T H O U T T H E V I R T U A LTM

Welcome To

iMVP Setup Guide for Mac


The iMVP Team is here for you

If you have any questions during the iMVP setup process, simply contact the iMVP Team. We’d be happy to answer quick questions, or take you through the entire setup process over the phone.

[email protected]

Toll Free: 1-844-ASK-iMVP(1-844-275-4687)

(You’ll like us...we’re really really nice!)


1System Requirements


iMVP Minimum Requirements

Using a network and computer with at least the following minimum requirements will help ensure you have a successful iMVP experience.

Recommended Network Bandwidth

• The bandwidth will be optimized for the best experience based on the participants’ network. It will automatically adjust for mobile, WiFi or Wired environments.

• We recommend your network should provide a consistent minimum of 1.5Mbps Download and 1.5 Mbps Upload. You can check your network speed at www.speedtest.net.

Processor Requirements

• Any 1 Ghz single core processor or better

Operating System and Browser Requirements

• Mac OS X with MacOS 10.6.8 /(Snow Leopard) or later

• Safari5+, Firefox, Chrome

Please note that it is very important that your system meets the minimum requirements. You are participating in a classroom environment and, just like in a traditional classroom, ineffective communication can have a negative impact on the experience not only for you, but also for your peers in the classroom.

Use the provided webcam and headsetOther web cameras and microphones can be used, but we strongly encourage the use of the camera and headset included with your iMVP package. CPU speed and performance can be severely decreased by use of older web cameras. Internal microphones and speakers can significantly decrease sound quality.

!

For Best Results, Don’t Use Mobile or WiFi ConnectionsFor best results, we strongly recommend using a wired network connection instead of a wireless network. To ensure your computer is using your network, plug in your network cable and turn off WiFi and/or mobile connections.

Tip


2iMVP Classroom Connection


Setup 1 - Connecting to the iMVP Classroom What is this setup?This setup installs the iMVP software needed on your computer so your browser can connect to the iMVP classrooms. The setup will also ask you to enter the iMVP test classroom, from where you can confirm your system is working prior to the class.

It is very important that you connect to the iMVP test classroom as soon as possible to confirm that your computer and network are compatible with our system. We don’t want you to miss the first portion of your class while troubleshooting your connection. You will receive an iMVP kit in the mail. This kit includes your USB headset & web camera.

1) Plug the headset that you received into your computer. You may use your own headset if you prefer. We request that you use a headset during the class because it improves the audio quality you hear, and reduces background noise for other students.

2) If your computer does not have a built-in webcam, plug in the web camera that you received into your computer. We request that you not use an older web camera as they may reduce CPU performance and video quality. When you plug the web camera into your computer, it will likely automatically install drivers for the web camera. If it does not, you may run the installation program on the CD that came with it or go to the camera maker’s web site to download software.

3) Go to www.imvpinfo.com/getstarted/software/imvp-mac-z.pkg and download the setup file.

4) When you have downloaded the setup file, run the installation program. This file will install the following programs on your computer:

• iMVP Classroom Connection Software (for your browser)

5) When the install program starts, you will see the following window. Click Continue to begin.

The iMVP Team is here to helpIf you have any difficulties completing the setup, if you have any questions, or if you would like someone to join you in the iMVP test classroom, just email [email protected] or call 1-844-ASK-iMVP.


Setup 1 - Connecting to the iMVP Classroom - continued

6) Select all the default options during the install. Once the install is completed, the classroom connection application should automatically start.

7) You can close the application.

8) Open your browser and go to www.imvpinfo.com/classroom/setup. Depending on your browser, you might be asked to allow the iMVP plugin to run the first time. Click your browser’s equivalent to allow this plugin to Always Run On This Site.

9) Once the classroom application has started, you will see the program icon in your Application Bar and a popup window asking you to Please Enter Your Name. Enter your name and click Join.

10) Once the classroom application loads, click Join Audio Conference via Mic & Speaker to confirm you want to use your computer’s Microphone and Speaker.



11) You will now be placed in the iMVP Test Classroom. You want to verify the following:

• CONFIRM you see yourself in the video window.

• CONFIRM the microphone and speakers work with the following steps:

• Move your mouse to the bottom left of the video screen and click the microphone options arrow and then click Audio Options.

• Click Test Computer Audio.

• In the Audio tab, click the Test Speaker buttons. The volume bars should move for the speakers and microphone tests.

You have completed connecting to the iMVP Classroom



If you have problems with the Classroom Connection, here are some troubleshooting tips:

• I can’t install the software

• Before attempting again, temporarily disable your virus protection, spyware, and ad-blocking software.

• Confirm you have Administrative Access to your computer. Some work computers need IT support to install new software on machines.

• I can’t connect to the classroom

• Confirm JavaScript is enabled on your browser.

• Try using another web browser.

• Something is wrong with my web camera; I can’t see myself

• Use the provided headset and camera.

• Adjust the iMVP Video Settings: While you are in the classroom, click the video options arrow on the lower left of the video window, and then click the Video Settings button. In the window that appears, on the Video tab, select your USB camera provided.


First try rebooting your computerTip



Classroom Connection Troubleshooting - continued:

• I can’t hear the music or I don’t see the microphone level move when I talk

• Check your main computer volume and confirm you are not on mute.

• Use the provided headset and camera.

• Adjust the iMVP Audio Settings: While you are in the classroom, move your mouse to the bottom left of the video screen and click the microphone options arrow and then click Audio Options. On the window that appears, click Test Computer Audio. Then in the Audio tab, click the Test Speaker button. The volume bars should move for the speaker and microphone.


Want someone to join you in the classroom for a complete test?If you would like someone to join you in the iMVP Test Classroom, just email [email protected] and we will be happy to do so, at a time that’s convenient for you, on any business day.

Tip

The iMVP Team is here to helpIf you have any difficulties completing the setup, or if you have any questions, just email [email protected] or call 1-844-ASK-iMVP. You’ll like talking to us!


3Lab Connection Test


Setup 2 - Run the Lab Connection Test

What is this test?This test installs and verifies the lab connection software. This will give you direct access to a computer setup specifically for your class (just as if you were sitting at an instructor-led classroom computer).

It is very important that you test your remote lab connection with these steps prior to the class. We don’t want you to miss the first portion of your class while troubleshooting your connection. iMVP Lab Connection Test

1) Go to https://itunes.apple.com/us/app/microsoft-remote-desktop/id715768417 to locate the Microsoft Remote Desktop Client software for Mac. Then press the View in Mac App Store button to open the download option from the Mac Store App. (If you get an External Protocol Request pop-up, press Launch Application)

2) From the Mac Store App, press the Install or Get button to start installing the Microsoft Remote Desktop Client software on your Mac.


Setup 2 - Connecting to the Remote iMVP Lab - continued

3) Once you have successfully installed the Microsoft Remote Desktop Client, open the application.

4) Press the + New button to add the test connection (leave other fields to their default setting) Connection Name: Amazon Training VM PC Name: 52.74.155.19 Username: rdptestuser Password: RDP.testpwd1



5) Connect to the test lab computer by double-clicking the test server you just added

6) If you receive a certificate message, press Continue.



7) You will see a Windows desktop computer appear confirming a successful connection to the test lab computer.

8) Close the connection to the test lab computer by moving your mouse to the top of the application and selecting File> Quit Microsoft Remote Desktop.

You have completed the remote lab connection test!


Congratulations!You have completed your iMVP setup!

Prior to your class, we will email your individual classroom connection details.

If you have any questions before the class, feel free to contact us. Your iMVP team will also be available throughout your class.

See you soon!

welcome togetstarted.imvpinfo.com/pdf/imvp-classroom-and-ibm-rdp...welcome to imvp setup guide for...

Documents