welding
DESCRIPTION
TRANSCRIPT
![Page 1: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/1.jpg)
Group Assignmentwelding Prepared by:
ABDUL JABBAR KHAN PANDIARAJ A/L RETENAM
![Page 2: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/2.jpg)
2
WELDINGDefinition: Material joining process. Two parts connected at their contacting surfaces by suitable heat and pressure.
Many welding processes are accomplished by heat alone, some others by heat and pressure, and some with pressure only.
In some welding operations a filler material is used.
Welding operation usually applied to metals but also used for plastics.
![Page 3: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/3.jpg)
Parts produced by any of the manufacturing processes can be made into larger, more complex bodies via Joining processes
• Creating a metallurgical bond by adhesion and diffusion• Joining by fusion with the use of various heat sources• Brazing or soldering with a lower-melting metal• Mechanical fastening
Joining ProcessesJoining Processes
![Page 4: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/4.jpg)
Fusion Welding Processes
![Page 5: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/5.jpg)
Sources of Energy for Fusion Welding
• Chemical reactions– Burning gases
– GAS WELDING
• Heat from electricity– Arc– ARC WELDING SYSTEMS– Resistance welding
• LightLightLASERLASER
![Page 6: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/6.jpg)
Three Specific Types of Welding Modules
• In this Welding, Cutting, and Brazing module, three specific types of welding are covered. These are listed below:– Oxygen-fuel gas welding and cutting– Arc welding and cutting– Resistance welding
![Page 7: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/7.jpg)
• Definition:– This is a group of fusion welding processes
that use heat and pressure to make the coalescence.• The heat comes from electrical resistance
to current flow at the site of the weld.
– The processes include:
• Spot Welding• Projection Welding• Seam Welding
Resistance Welding
![Page 8: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/8.jpg)
• Spot Welding–A process typically used in high-
volume, rapid welding applications.• The pieces to be joined are clamped between two electrodes under force, and an electrical current is sent through them.
Resistance Welding
![Page 9: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/9.jpg)
Welding/Cutting Hazards• Potential Hazards
– Fires may start by hot materials igniting nearby combustibles.
– Burns to the operator may occur if unprotected skin comes into contact with the extremely hot work.
– Magnetic fields could easily destroy/disrupt electronic components, stored data if not careful.
![Page 10: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/10.jpg)
Weldability and Weld Quality- Welding Defects-
![Page 11: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/11.jpg)
1. Fusion welding defects due wrong heat input, insufficient rate of weld metal deposition, and cooling.
2. Lack of bonding or gas porosity due to surface contaminants, including oxides, oils, etc.
3. Undesirable reactions with surface contaminants
4. Solidification cracks in the weld.
5. Solidification shrinkage coupled with solid shrinkage imposes internal tensile stresses on the structure, may lead to distortion.
6. Gases released or formed during welding (eg CO) can lead to porosity which weakens the joint and acts as a stress raiser.
Welding Defects
![Page 12: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/12.jpg)
12
Weld jointThere are 5 basic joint types in welding
• Butt joint: Two materials are in the same plane, joined from the edges.
• Corner joint:The corners of two materials form a right angle and joined.
• Lap joint: Two parts overlaps.
• Tee joint: One part is perpendicular to the other, making a T shape.
• Edge joint: Edges of the two materials joined.
![Page 13: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/13.jpg)
13
Weld Joints
![Page 14: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/14.jpg)
14
Types of weld1. Fillet weld: Used in T joints,corner joints, lap
joints.
2. Groove weld:Used in butt joints.
3. Plug weld: Used in lap joints.
4. Slot weld: Used in lap joints.
5. Spot weld: Used in lap joints.
6. Seam weld: Used in lap joints.
7. Flange weld:Used in edge joints.
8. Surfacing weld:Not a joining process, it is used to increase the thickness of the plate, or provide a protective coating on the surface.
![Page 16: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/16.jpg)
Oxyacetylene Gas Welding
Three basic types of oxyacetylene flames used in oxyfuel-gas welding and cutting operations: (a) neutral flame; (b) oxidizing flame; (c) carburizing, or reducing, flame. The gas mixture in (a) is basically equal volumes of oxygen and acetylene. (d) The principle of the oxyfuel-gas welding operation.
![Page 17: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/17.jpg)
Oxygen-fuel gas welding & Cutting
• The elements of Oxygen-fuel gas welding and cutting:– General Requirements– Cylinders– Service Pipe Systems– Pipe System Protection
![Page 18: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/18.jpg)
Oxygen-fuel gas welding and cutting
• General Requirements– Focuses on using Acetylene Safely
• Flammable• Unstable• Cannot be adjusted above 15 psi
– Safe Work Practices• Blow out cylinder valve • Turn on cylinder valve first and
then adjust the regulator pressure screw.• Never stand in front or behind
a regulator when opening the cylinder valve
• Open cylinder valve slowly
• The pressure adjusting screw:– Turning clockwise allows the gas
allows to flow.– Turning counterclockwise reduces
or stop the gas flow.
![Page 19: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/19.jpg)
• General Requirements Cont.:– Safe Work Practices
• Purge oxygen and acetylene passages • Light the acetylene • Never use oil or grease• Do not use oxygen as a substitute for
air • Keep your work area clean
Oxygen-fuel gas welding and cutting
![Page 20: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/20.jpg)
20
Arc Welding
![Page 21: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/21.jpg)
t
Arc Welding and Cutting• Definition:
– A fusion process wherein the coalescence of the metals is achieved from the heat of an electric arc formed between an electrode and the work.
• Application• Installation• Operation & Maintenance
![Page 22: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/22.jpg)
• Application– Applies to a large and varied group of
processes that use an electric arc as the source of heat to melt and join metals.
• Installation– Arc welding requires proper installation of
equipment. – A critical part of installation is ensuring that
proper grounding is completed.
Arc Welding & Cutting
![Page 23: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/23.jpg)
Arc Welding & Cutting• Operation & Maintenance
– All connections to the machine shall be checked to make certain that they are properly made.
– The work lead shall be firmly attached to the work.
– Magnetic work clamps shall be free from adherent metal particles of spatter on contact surfaces.
– Coiled welding cable shall be spread out before use to avoid serious overheating and damage to insulation.
![Page 24: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/24.jpg)
Methods of Arc Welding
• Three Types of Welding Methods:– Tungsten Inert Gas Welding (TIG) – Gas Metal Arc Welding (MIG)– Shielded Metal Arc Welding (SMAW)/
Stick Welding
![Page 25: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/25.jpg)
• Heat is produced from electric arc between workpiece and electrode material for melting the workpiece material.
• AC and DC are used• An Inert gas shields both
electrodes• Most heat energy is due to
electron flow to metal
Direct Current Electrode Negative (DCEN): Deeper weld.
Direct Current Electrode Positive (DCEP): Shallower and Wider
Heat input v
EIH H- heat input, E, Voltage, I, Current, and v the
velocity of the arc travels along the weld line
Electric Arc Welding
![Page 26: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/26.jpg)
• Electron Beam welding (EBW)– Heat is produced by high velocity
electron gun in a narrow beam
– No filler material
– High rate of heating results in greater depth and heat-affected zone is very small
– Suitable for welding refractory materials like: molybdenum and zirconium
– Requires a vacuum (limitation)
– x-ray will be generated around the welding gun which may be cancerous
Other Welding Processes High Energy Beam Welding
![Page 27: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/27.jpg)
Safe Work Practices
• Electric & Gas Welding– Safety Check:
•Ensure electrical cord, electrode holder and cables are free from defects
– No cable splices within 10 feet of electrode holder.
•Ensure welding unit is properly grounded. This helps to avoid over heating.
•All defective equipment shall be repaired or replaced before using.
![Page 28: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/28.jpg)
Safe Work Practices• Electric & Gas Welding Cont.:
– Safety Check:• Remove all jewelry – rings, watches,
bracelets, etc…• Ensure PPE e.g.. welding hood, gloves,
rubber boots or safety shoes, apron are available and in good condition.
• Ensure fire extinguisher is charged and available.
• Ensure adequate ventilation and lighting is in place.
• Set Voltage Regulator to Manufacture’s specifications.
• Avoid electrical shock DON’T wrap cables around any body part.
• Ensure fittings are tight.
![Page 29: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/29.jpg)
Safe Work Practices
• Electric & Gas Welding Cont.:– Safety Check:
•Inspect hoses for cuts and frayed areas.
•Set gauges to desired PSI.•Ensure that sufficient PPE is made
available.•Locate welding screens to protect
employee’s – DON’T block your exit.•Ensure that adequate ventilation and
lighting are in place.
![Page 30: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/30.jpg)
Fire Protection & Prevention
• Fire hazards must be removed, or– Guards installed, or– Welding/cutting must NOT take place
• Hot work permit should be used outside designated areas to ensure that all fire hazards are controlled
• Use of fire watch– 1/2 hour after operation ceases
![Page 31: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/31.jpg)
L10 : Joining processes L10 : Joining processes Proper Ventilation for Welding
• Ensure protection from fumes and gases by one or a combination of the following:– Good general ventilation.– Use of a booth.– Local exhaust ventilation
on the hand piece.– Air supply to the helmet.
![Page 32: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/32.jpg)
U
Welding Operators Protection
• Welding involves specialized personal protection that must be worn every time you perform welding operations. The following is a list of basic PPE: – Fire-resistant gloves – Aprons – Safety shoes – Helmet – Ultraviolet radiation filter plate (arc welding) – Goggles with filter lenses
![Page 33: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/33.jpg)
Sequences of welding 1.Do not over weld2.Control fit up4.For groove welds, use joints that will minimize the volume of weld metal. Consider double-sided joints instead of single-sided joints5.Weld alternately on either side of the joint when possible with multiple-pass welds6.Use minimal number of weld passes7.Use low heat input procedures. This generally means high deposition rates and higher travel speeds9.Use welding positioners to achieve the maximum amount of flat-position welding. 10.Balance welds about the neutral axis 11.Distribute the welding heat as evenly as possible through a planned welding sequence 12.Weld toward the unrestrained part of the member13.Use clamps, fixtures, and strong backs to maintain fit up and alignment14. welds being made continually balance each other
![Page 34: welding](https://reader035.vdocument.in/reader035/viewer/2022081414/54bd74b54a79597f288b45de/html5/thumbnails/34.jpg)
Any Questions
????