Welding Visual Inspection System

■ Visual and measuring inspection of weld, edges geometry

■ Laser profiling and video recording■ Reflecting surfaces compatibility■ Real-time analysis and recording data

■ Wi-fi data transmission

■ Working time up to 8 hours■ Operating temperature -40..+50 ° С

■ Control of butt joints and T-joints

Parameter Value

Field of view of the laser scanner, mm depth - 120, beam length 30 ... 110

Max Sampling rate, profiles/s >2000

Measurement error, mm ±0,07

Resolution of laser line, mm 0,025…0,08

Camera resolution 1296 х 976

Camera FPS up to 120

Laser spectrum red (660 nm) or blue (405 nm)

Laser Safety Class Type 2 (IEC60825-1)

Operation temperature -40…50 °С

Measuring Parameters width, height, angles, misaligment edge, undercuts, concavity, bulge, scaly, pore, etc.

Software for 3D visualization and analysis supplied in the kit

AVICScan

Install the system on the weld

Scan your weld

Select a template of inspected weld or edges, check list of parameters and tolerances

Create a measurement report, transfer data to the PC

Step 2

Step 4

EASY

TO US

E

Wi-Fi

tocuhscreen

Protected case Built-in li-ion batteries

HeightAdjustment

LED camera

2D laser

Enctodered magnetic wheels

Step 1

Step 3

■ Posible use in automated systems

Welding Visual Inspection System AVICScan