weltech pendulum elevator pbe 200 - 2.imimg.com · no.68, 3 rd main, opp. to vst, mahadevapura...
TRANSCRIPT
No.68, 3rd
Main, OPP. TO VST, Mahadevapura post, Whitefield Road, Bangalore-560048
Tel: 080 -28515448, Mob: +91-9739127464, [email protected]
`
Maximum Capacity Cu.mts/Hour 23
TYPE Or Model
PBE 200
The pendulum bucket elevators produced by Weltech can
be delivered in two types, depending ng on the amount of 4. Corner sections:product to be transported. This conveyor has the big these corners sections can either form an “L” or a “T”, benefit of combining both horizontal and vertical transport thus being able to form various transport lines (please
in one machine. Adding the very gentle way of find schemas on page 2). Speed guard integrated in transporting, the pendulum bucket elevator is the perfect lower corner station. conveyor for seeds and other sensi ble products. By means
of using different speeds, there’s a wide range of different 5. Outlet section: hourly capacities that can be reached. During the whole way through the pendulum bucket
elevator, the buckets are always in a horizontal position.
Only in the outlet section, the buckets are titled by a lever
that can also be operated pneumatically i f several outlet stations are installed. In this case, one of the outlets is
activated, all the others are not in operation and the Weltech pendulum bucket elevators are designedbuckets pass them by in horizontal positi on. The total
modularly and are normally powder coated. On request, rotation of the bucket at the outlet guarantees a completeSS material construction or hot dip galvanized surfaces are also possible.emptying.
1. Tensioning station:6. Drive section:This station is situated in the foot section as the first
This is the last station in the system. The gear motors have part. By means of turning a spindle, the tension of thetorque control (=overload protection) and a brake. Variable
chain carrying the buckets is easily adjustable.speed i s avai lable on request. It is necessary to use a soft
starter. Braking must happen temporally delayed after 2. Inlet section:
stopping the feeder. The overlapping of the buckets in this section grants
that all product inserted will go into the buckets passing7. Buckets:by without any loss. Generally, a vibratory feeder should
The buckets are made of plastic that can be food safe and be used before the inlet to guarantee a harmonious
antistatic on request. Stainl ess steel buckets also available. filling of the buckets. The installation of several inlets is.
possible.
8. Chain: 3. Intermediate sections:the metal chai n grants long life and is easy to assemble bythe intermediate vertical and horizontal sections are means of using simple master links. The buckets can be
delivered in a standard length. To reach the correctTaken off the chain without any tools, therefore changing of heights and lengths of the system, fitting pieces withBuckets is very easy.
specific lengths for each order are attached. The
connection of the slots with each other and with the
other stations is done by means of flanges that are
screwed with each other.
4
5 6
3
1
7
8
23 4
Pendulum Bucket Elevator PBE 200
No.68, 3rd
Main, OPP. TO VST, Mahadevapura post, Whitefield Road, Bangalore-560048
Tel: 080 -28515448, Mob: +91-9739127464, [email protected]
`
Pendulum bucket elevator
PBE 200
MODEL A B C D E F G H I J K L M N O P Q R S T U V W
PBE 200 800 400 600 560 800 910 844 200 350 630 1083 1000 700 653 560 844 1140 590 700 740 840 190 640