westbrook - getools-527b.kxcdn.com · westbrook welding alloys ltd. buyers product guide welding...
TRANSCRIPT
WESTBROOKWELDING ALLOYS LTD.
BUYERS PRODUCT GUIDEWelding Wires & Electrodes
Next Day Delivery Tel: 01925 839983
Small Diameter Tig Wires 0.8, 1.0 & 1.2mm Fax: 01925 839990
Designation
STAINLESS STEEL FILLER WIRES
BS EN ISO 14343 AWS A5.9-95 Werkstoff No. Information
-
19.9L
19.9LSi
23.12.H
23.12.L
23.12.LSi
23.12.2.L
25.20
29.9
--
19.12.3L
19.12.3LSi
18.15.3L
19.9Nb
13
--
17
22.9.3NL
25.10.4NL
*Nearest Equivalent
ER307*
ER308L
ER308LSi
ER309
ER309L
ER309LSi
ER309MoL
ER310
ER312
ER316H
ER316L
ER316LSi
ER317L
ER347
ER410
ER420
ER430
ER2209
N/a
1.4370
1.4316
1.4316
1.4829*
1.4332
1.4332
1.4459
1.4842
1.4337
1.4436
1.4430
1.4430
1.4438*
1.4551
1.4009*
1.4007
1.4016
1.4462*
1.4501
SW-307
SW-308L
SW-308LSi
SW-309
SW-309L
SW-309LSi
SW-309LMO
SW-310
SW-312
SW-316H
SW-316L
SW-316LSi
SW-317L
SW-347
SW-410
SW-420
SW-430
SW-4462
SW-4501
An 18.8Mn wire for crack resistant welds in difficult to weld steel and dissimilar joints. Work-hardens 220-400HB.
This 18.8 filler wire is used to weld corrosion resistant 304/304L alsoother grades e.g 301,302, 303 and 305.
Applications as 308L, with a balanced analysis and increased siliconcontent an improved weld bead appearance is obtained.
A high carbon filler wire used for buttering layers on C-Mn steel andjoining stainless to steels for high temperature service.
This wire is used for joining stainless to C-Mn steels and also as abuttering layer prior to overlaying with 308L.
Applications as 309L, with a balanced analysis and increased siliconcontent an improved weld bead appearance is obtained.
May be used as a dissimilar to join stainless steels, particularly Molybearing, to C-Mn steels.
Recommended for joining and reclaiming 25Cr-20Ni stainlesssteels with carbon<0.2% in both wrought and cast form.
A filler wire with a high tolerance to dilution recommended fordissimilar joints and high strength difficult to weld steels.
Used for welding high carbon 316H stainless steel working in hightemperature creep conditions for extended periods of time.
A filler wire used for 316/316L moly-bearing stainless steels withexcellent corrosion and pitting resistance properties.
Applications as 316L, with a balanced analysis and increased siliconcontent an improved weld bead appearance is obtained.
With an increased molybdenum content over 316L this alloy has improved pittingresistance in high chloride environments. Nickel is also increased significantly
A niobium stablisied stainless filler wire for welding 347 and 321type stabilised corrosion resistant stainless steels.
For joining martensitic 12%Cr (410 type) stainless steels used forresistance to oxidation and hydrogen attack.
A matching filler wire for AISI 420 martensitic type stainless steelwith higher chrome and carbon contents than a 410 type
Filler wire for welding AISI 430 ferritic stainless stell
A Duplex type stainless stel filler used for welding 22CR/9Ni(UNS 31803) type materials, typical PREN number is 34+.
A super duplex type wire used for the welding of 25/10/5 material(S/Duplex) Typical PREN 40+.
Designation
CHROME - MOLY FILLER WIRES
BS** AWS Information
A5.28:ER80S-B2*
A5.28:ER80S-D2*
A5.28:ER80S-B3*
CMW-1900
CMW-1910
CMW-1920
For welding low alloy ferritic creep resisting steels 1Cr 0.5Moand 1.5Cr 0.5Mo used extensively in power generation.
A Manganese-Moly filler wire for welding high strength steelswith good sub-sero toughness in the PWHT condition.
For welding 2.25cR 1mO AND 0.5cR 0.5mO 0.25v low alloyferritic creep resisting steels used in power generation.
BS 2901:Pt1:A32
BS 2901:Pt1:A31
BS 2901:Pt1:A33
*Nearest Equivalent ** Now obsolete WELD
ING
WIR
ES
WELD
ING
WIR
ES
Next Day Delivery Tel: 01925 839983
Subject to orders placed before 4.30pm Fax: 01925 839990
Designation
ALUMINIUM & ALUMINIUM ALLOY FILLER WIRES
ISO EN 18273 AWS A5.10 Information
ER1100*
ER4043
ER5183
ER5356
ER5556
AW-1050
AW-4043
AW-5183
AW-5356
AW-5556
Classed as pure aluminium this alloy is suitable for use in thefood and chemical industries and on work being anodised.
A 5% silicon alloy for wrought and cast materials of similarcomposition but not for use on items to be anodised.
This alloy is mainly available as Mig. Can be anodised - high strengthand marine applications.
A 5% magnesium alloy used to weld similar alloys for use inmany marine and chemical plant applications.
With a magnesium content of 5% minimum this high strengthalloy is used mainly on marine castings and fabrication.
AL 1050
AL 4043
AL 5183
AL 5356
AL 5556
*Nearest Equivalent
Designation
NICKEL & NICKEL ALLOY FILLER WIRES
BS 2901:Pt5 AWS A5.14 Werkstoff No. Information
ERNi-1
ERNiCu-7
ERNiCr-3
ERNiCrMo-3
ERCuNi
ERNiCrMo-4
2.4155
2.4377
2.4806
2.4831
2.4886
NW-1700
NW-1710
NW-1720
NW-1740
NW-1750
NW-1760
A low carbon filler wire for Nickel 200/201 also for buttering oroverlaying other materials prior to joining.
A nickel-copper type filler wire for welding Monel 400 and otherproprietary alloys also joining these materials to steel.
This wire is recommended for welding Inconel 600/601 andIncoloy 800 also joining these to steel including stainless types.
For joining Inconel 625, Incoloy 825, 6Mo and dissimilar jointsbetween Ni-Alloys and stainless steels also overlaying steel.
A CuNi filler wire for joining 70/30 and 90/10 copper nickel anddissimilar joints between CuNi, Monel 400 and Nickel 200.
A filler wire for C-276 and similar NiCrMo alloys also jointswith stainless steels and overlaying C-Mn steels.
NA32
NA33
NA35
NA43
C18*
NA48
COPPER & COPPER ALLOY FILLER WIRES
Designation BS 2901:Pt3 AWS A5.7 Werkstoff No. Information
ERCuSn-A*
ERCuAl-A1
ERCuSi-A
ERCu
2.1022
2.0921
2.1461
2.1006
CW1800
CW1810
CW1820
CW-1860
A Tin Bronze wire for welding Phosphor Bronze and similar typematerials also for wear and corrosion resistant overlays.
An 8% Aluminium Bronze filler wire for joining or reclaimingsimilar materials or wear resistant overlays on steel.
A copper-silicon wire for joining matching alloys and the MIGbrazing of steel also dissimilar joints with other copper alloys.
Pure copper filler wire with good weldability for use on mostgrades of deoxidised copper requiring high conductivity.
C11
C28
C9
C7
Designation
HARD SURFACING FILLER WIRES
DIN 8555 Hardness Information
350HB
58RC
**
**
HW-1400
HW-1410
HW-1460
HW-1461
Recommended for areas of high impact this wire is for useon tools, dies and equipment used in quarrying industry.
With a hardness of 58RC the wire is recommended for use in highabrasion/moderate impact situation e.g. tool/die and earthmoving.
High speed steel deposit, compatible with many tool steels,to give hardness of 58-60 Rc
Hot-work tool steel deposit with matching analysis to H11.Heat treatable.
MSG2-GZ-350
MSG6-GZ-60
WSG4-GZ-60-S
WSG6-GZ-55-T WESTB
RO
OK
WESTB
RO
OK
2.0837
*Nearest Equivalent ** Hardness dependent upon base material
** Monel, Incoloy, Inconel and Nimonic are trademarks of Inco Group of Companies. (special metals)
Next Day Delivery Tel: 01925 839983
Subject to orders placed before 4.30pm Fax: 01925 839990
Most available in Mig to BS EN 440
Designation
MILD & LOW ALLOY STEEL FILLER WIRES
BS / BS EN AWS Information
-
A5.18:ER70S-2
A5.18:ER70S-6
A5.28:ERS80S-Ni1
A5.28:ERS80S-Ni2
MS-A1
MS-A15
MS-A18
MS-A801
MS-A802
A copper coated mild steel filler wire for the oxy-acetylenewelding of mild steel sheet, plate and pipework.
A triple-deoxidised copper coated mild steel wire for Tigwelding all forms of mild steel especially tube.
A double-deoxidised copper coated wire for Tig welding allforms of mild steel especially work for radiographic quality.
A wire containing 1% nickel that is used on C-Mn or similarsteels for sub-zero toughness and corrosion resistance.
A wire containing 2% nickel that is used on C-Mn or similarsteels for sub-zero toughness at-50 to -75Deg.C.
BS 1453:1972:A1(1987)
BS EN1668:1997:W2Ti
BS EN1668:1997:W3Si1
BS EN1668:1997:W3Ni1
BS EN1668:1997:W2Ni2
Electrode
Electrode
MILD STEEL ELECTRODES
ELECTRODES FOR CAST IRON
Classification
Classification
Coating Data
Coating Data
Information
Information
MS-100
CI-200
MS-120
CI-220
MS-135
MS-136M
MS-6013T
A medium coated electrode for fabrication of plate andpipework especially where high quality weld finish is the criteria.
For use on all types of cast iron giving a fully-machinabledeposit easy to use even in position.
Designed for vertical-down welding this electrode can be usedin all positions with ease giving an excellent profile and finish.
A Ni-Fe electrode for joining and surfacing the higher strengthnodular cast irons and joining iron to mild steel.
Universal basic-coated electrode (115% recovery). Good lowtemperature properties down to -50DegC.
Double-coated low hydrogen electrode for universalwelding. Excellent for root runs.
Economical mild steel electrode for general fabrication.
BS EN 499:E380RC11AWS A5.1:E6013
AWS A5.15:ENi-Cl
AWS A5.15:ENiFe-Cl
BS EN 499:E380RC11AWS A5.1:E6013
E424 B32 H5
E382 B12 H10
E420 RC11
Rutile - Cellulose
Graphited
Graphited
Rutile-Cellulose
Basic
Basic
Rutile
ELECTRODES
Electrode
ALLOY STEEL ELECTRODES
Classification Coating Data Information
AS-300
AS-315
High recovery electrode for difficult to weld steels and also bufferlayers prior to hardsurfacing. Recovery 160% approx.
Designed for maintenance and repair of difficult to weld steelsand dissimilar joints between stainless and mild/alloy steels.
BS EN 1600:E18 8 MnR53AWS A5.4:E307-26
BS EN 1600:E29 9R12AWS A5.4:E312-16
Rutile
Rutile
Electrode
HARD SURFACING ELECTRODES
Classification Coating Data Information
HF-415
HF-400
HF-425
57 RC. ACr-Mo-V martensitic type electrode for surfacing areas ofabrasion, moderate to high impact and compression
Wear facing electrode for impact resistance.
58-60 RC. The deposit is a C-Cr-Fe weld metal with 140%metal recovery to resist high abrasion up to 200Deg.C.
DIN 8555 E6-UM-60S
E1-UM-400
DIN 8555 E10-UM-60-6PRZ
Rutile / Basic
Rutile
RutileWELD
ING
ELECTR
OD
ES
WELD
ING
ELECTR
OD
ES
WIR
ES
WIR
ES
MS-7018-1TEconomical low hydrogen electrode.
E426 B42 H5 Basic
Next Day Delivery Tel: 01925 839983
Subject to orders placed before 4.30pm Fax: 01925 839990
Electrode
Electrode
Electrode
STAINLESS STEEL ELECTRODES
NICKEL ALLOY ELECTRODES
COPPER ALLOY ELECTRODES
Classification
Classification
Classification
Coating Data
Coating Data
Coating Data
Information
Information
Information
RutileAC/DC+ve
RutileAC/DC+ve
RutileAC/DC+ve
RutileAC/DC+ve
RutileAC/DC+ve
RutileAC/DC+ve
RutileAC/DC+ve
RutileAC/DC+ve
RutileAC/DC+ve
SS-620
SS-630
SS-640
SS-650
SS-660
SS-670
SS-680P
SS-690
SS-695
A low carbon electrode for welding AISI 302, 304, 305 and304L type stainless steels. Also for corrosion resistant overlays.
A low carbon electrode for welding AISI 316 and 316Lmoly-bearing stainless steels with improved pitting resistance.
For welding 347 & 321 - when welding 321 maximum operatingtemperature must be considered.
A high strength 29/9 type electrode for joining stainless steelto mild steel due to its duplex structure, highly crack resistant.
Suitable for corrosion resistant overlays on C-Mn steel prior todepositing 308 or 308L, also for joining s/steel to C-Mn steel.
Suitable for corrosion resistant overlays on C-Mn steel prior todepositing 308 or 308L, also for joining s/steel to C-Mn steel.
Matching electrode for the welding of duplex stainless steel(S31803)
Super austenitic electrode for the welding of materialssuch as 904L.
Electrode may be used as a dissimilar, particularly betweenMoly-bearing stainless steel and C/Mn steels.
BS EN 1600:E19 9 LR12AWS A5.4:E308L-17
BS EN 1600:E19 12 3 LR12AWS A5.4:E316L-17
BS EN 1600:E19 9 Nb R12AWS A5.4:E347-17
BS EN 1600:E29 9 R12AWS A5.4:E312-17
BS EN 1600:E23 12 LR12AWS A5.4:E309L-17
BS EN 1600:E23 12 2 LRAWS A5 4:E309LMo-17
BS EN 1600:E25 20 LR12AWS A5.4:E310-16
BS EN 1600:E22 9 3 NLR32AWS A5.4:E2209-17
BS EN 1600:E20 25 5 Cu NLR12AWS A5.4:E385-16
BasicDC+ve
Cryolite basedAC/DC+ve
Cryolite basedAC/DC+ve
BasicDC+ve
BasicDC+ve
BasicDC+ve
BasicDC+ve
BasicDC+ve
NA-700
CA-800
NA-710
CA-810
NA-720
NA-740
NA-750
NA-760
A low carbon nickel electrode for joining Nickel 200/201 alsofor buttering or overlaying other materials prior to joining.
For joining copper and copper alloys eg. Phosphor / TinBronzes also these materials to steels.
A Monel type electrode for joining Monel 400 and otherproprietory NiCu alloys also joining these alloys to steel.
An 8% aluminium bronze electrode for use on similar typebase materials and overlaying steels to resist frictional wear.
A nickel based electrode for joining Inconel 600, Nimonic 75 andcold tough 3% - 9% nickel steels for cryogenic applications.
Designed to weld Inconel 625 this electrode can be used onother nickel alloys and super-austentitic stainless steels.
A copper nickel electrode for use on 70/30 and 90/10 typecopper nickel alloys and corrosion resistant overlays.
Matching electrode for welding Hastelloy C276.
AWS A5.11:ENi-1
AWS A5.6:ECuSn-A
AWS A5.11:ENiCu-7
AWS A5.6:ECuAl-A2
AWS A5.11:ENiCrFe-3
AWS A5.11:ENiCrMo-3
AWS A5.6:ECuNi
El NiMo 15Cr15WAWS A5.11:ENiCrMo-4
**Nickel 200/201, Monel, Incoloy, Inconel and Nimonic are trademarks of Inco Group of Companies.
WESTB
RO
OK
WESTB
RO
OK
Next Day Delivery Tel: 01925 839983
Subject to orders placed before 4.30pm Fax: 01925 839990
Electrode
Electrode
CHROME-MOLY ELECTRODES
BRAZING PRODUCTS
Classification
Classification
Coating Data
Spec
Information
Information
BasicDC+ve/AC
LCuP-7
LAg2P
LAg5P
LAg15P
LAg40Sn
LAg55Sn
LCuZn40
LCuNi10Zn42
BasicDC+ve/AC
CM-900
CP0
CP2
CP5
CP15
SB40
SB55
BA 1200(FC)
BA 1210(FC)
CM-920
This electrode is for use on 1.25Cr 0.5Mo type steels atelevated service temperatures up to 550Deg.C.
Copper/Phosphorus brazing alloy without silver, notrecommended for applications where vibration is present.
Copper/Phosphorus brazing alloy with 2% silver, improvedductility over CP0. Minimum silver requirement for refrigeration.
Copper/Phosphorus brazing alloy with 5% silver, increasedductility over CP2. Recommended for refrigeration.
Copper/Phosphorus brazing alloy with 15% silver, increasedductility over CP5.
Versatile cadmium free silver brazing alloy.
Extremely fluid cadmium free silver brazing alloy forcapillary joints - good colour match for stainless steel.
General purpose brazing alloy, available as bare wire or fluxcoated.
Nickel-bearing, high strength brazing alloy, also availableflux coated.
This electrode is for use on 2.25Cr 1.0Mo type steelsespecially in high temperature/corrosive environments.
BS 2493:1CrMoBHAWS A5.5:E8018-B2
CP-3
CP-2
CP-4
CP-1
AG20
AG14
C2
C5
BS 2493:2CrMoBHAWS A5.5:E9018-B3
Electrode
ALUMINIUM ELECTRODES
Classification Coating Data Information
EL-ALSi5
EL-ALSi12
AL1000
AL1014
Aluminium electrode, containing 5% silicon for welding alloysof similar composition.
Aluminium electrode, containing 12% silicon for welding alloysof similar composition, such as extrusions and castings.
E4043
E4047
WELD
ING
ELECTR
OD
ES
WELD
ING
ELECTR
OD
ES
Next Day Delivery Tel: 01925 839983
Fax: 01925 839990
FILLER WIRES FOR JOINING SIMILAR / DISSIMILAR GRADES OF STAINLESS STEELS
Line 1. First Choice. Line 2. Second Choice. Line 3. Third Choice. Line 4. Fourth Choice.
WESTB
RO
OK
WESTB
RO
OK
Subject to orders placed before 4.30pm
BaseMaterial
BaseMaterial
301
70206082606360616101A508354545154A52515005310512001080A1050A
SW-308LSW-309L
--
AW-5556AAW-5556AAW-5556AAW-5556A
AW-5556AAW-5556AAW-5556AAW-5556A
AW-5556AAW-5556AAW-5556AAW-5556A
AW-5556AAW-5556AAW-5556AAW-5556A
AW-5556AAW-5556AAW-5556AAW-5556A
AW-5556AAW-5556AAW-5556AAW-5556A
AW-5356AW-5356AW-5356AW-5356
AW-5356AW-5356AW-5356AW-5356
AW-5556AAW-5556AAW-5556AAW-5356
AW-5556AAW-5556AAW-5556AAW-5556A
----
----
----
----
SW-308LSW-309L
--
SW-308LSW-309L
--
SW-347SW-308L
--
SW-347SW-308L
--
SW-347SW-308L
--
SW-347SW-308L
--
SW-347SW-308L
--
SW-347SW-309SW-309L
-
SW-310SW-347
--
SW-316LSW-308HSW-347
-
SW-316LSW-347
--
SW-316LSW-347
--
SW-347SW-308L
--
SW-317SW-308L
--
SW-317SW-308L
--
SW-317SW-308L
--
SW-317SW-308L
--
SW-317SW-308L
--
SW-316LSW-309L
--
SW-310SW-317L
--
SW-317SW-316L
--
SW-317SW-316L
--
SW-317L---
SW-316HSW-308L
--
SW-316HSW-308L
--
SW-316HSW-308L
--
SW-316HSW-308L
--
SW-316HSW-308L
--
SW-309LSW-316L
--
SW-310SW-316L
--
SW-316LSW-316H
--
SW-316SW-316LSi
--
SW-316HSW-308L
--
SW-316HSW-308L
--
SW-316HSW-308L
--
SW-316HSW-308L
--
SW-316HSW-308L
--
SW-309SW-316H
--
SW-310SW-316H
--
SW-316H---
SW-310SW-308L
--
SW-310SW-308L
--
SW-312---
SW-310SW-308H
--
SW-310SW-308L
--
SW-310SW-309
--
SW-310---
SW-309SW-309L
SW-309LSi-
SW-309SW-309L
SW-309LSi-
SW-309SW-309L
SW-309LSi-
SW-309SW-309L
SW-309LSi-
SW-309SW-309L
SW-309LSi-
SW-309SW-309L
SW-309LSi-
SW-308LSW-308LSi
--
SW-308LSW-308LSi
--
SW-308LSW-308LSi
--
SW-308LSW-308LSi
--
SW-308LSW-308LSi
--
SW-308LSW-308LSi
--
SW-308LSW-308LSi
--
SW-308LSW-308LSi
--
SW-308H---
SW-308LSW-308LSi
--
SW-308LSW-308LSi
--
SW-312---
SW-308LSW-308LSi
--
SW-308SW-308L
SW-308LSi-
SW-308SW-308L
SW-308LSi-
430
1050A
1080A
1200
3105
5005
5251
5154A
5454
5083
6101A
6061
6063
6082
7020
420
410
321347
317/L
316/L
316H
310/S
309/S
304/L
304H
303/Se
302/B
301
302/B 303/Se 304H 304/L 309/S 310/S 316H 316/L 317/L 321347
410 420 430
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
1234
SW-308LSW-309L
--
SW-308LSW-309L
--
SW-308LSW-309L
--
SW-308LSW-309L
--
SW-309SW-309L
--
SW-309SW-309L
--
SW-316HSW-309L
--
SW-316LSW-309L
--
SW-316LSW-309L
--
SW-347SW-309L
--
SW-430SW-308L
--
SW-430SW-308L
--
SW-430SW-308L
--
SW-308LSW-309L
--
SW-308LSW-309L
--
SW-308LSW-309L
--
SW-308LSW-309L
--
SW-309SW-309L
--
SW-309SW-309L
--
SW-316HSW-309L
--
SW-316LSW-309L
--
SW-316LSW-309L
--
SW-347SW-309L
--
SW-420SW-308L
--
SW-420SW-308L
--
SW-308LSW-309L
--
SW-308LSW-309L
--
SW-308LSW-309L
--
SW-308LSW-309L
--
SW-309SW-309L
--
SW-309SW-309L
--
SW-316HSW-309L
--
SW-316LSW-309L
--
SW-316LSW-309L
--
SW-347SW-309L
--
SW-410SW-308L
--
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043AAW-5356
AW-5356AW-5356AW-5356AW-5356
AW-5356AW-5356AW-5356AW-5356
AW-5356AW-5356AW-5356AW-5356
AW-5556AAW-5556AAW-5356AW-5356
AW-4043AAW-4043AAW-4043A
-
AW-4043AAW-4043AAW-4043A
-
AW-4043AAW-4043AAW-4043A
-
AW-4043AAW-4043AAW-4043A
-
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043A
-
AW-4043AAW-4043AAW-4043A
-
AW-4043AAW-4043AAW-4043A
-
AW-4043AAW-4043AAW-4043A
-
AW-4043AAW-4043AAW-4043A
-
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043AAW-5356
AW-4043AAW-4043AAW-4043AAW-5356
AW-5356AW-5356AW-5356AW-5356
AW-5356AW-5356AW-5356AW-5356
AW-5356AW-5356AW-5356AW-5356
AW-5356AW-5356AW-5356AW-5356
AW-5356AW-5356AW-5356AW-5356
AW-5556AAW-5556AAW-5356AW-5356
AW-5556AAW-5556AAW-5356AW-5356
AW-5356AW-5356AW-5356AW-5356
AW-5356AW-5356AW-5356
-
AW-5356AW-5356AW-5356
-
AW-5356AW-5356AW-5356
-
AW-5556AAW-5556AAW-5356
-
AW-5556AAW-5556AAW-5556AAW-5556A
AW-5556AAW-5556AAW-5556AAW-5556A
AW-5556AAW-5556AAW-5556AAW-5556A
AW-5556AAW-5556AAW-5556AAW-5556A
AW-5556AAW-5556AAW-5556AAW-5556A
AW-5356AW-5356AW-5356AW-5356
AW-5356AW-5154AAW-5356AW-5356
AW-5356AW-5154AAW-5356
AW-5154A
AW-5556AAW-5556AAW-5556AAW-5356
AW-5356AW-5154AAW-5356AW-5356
AW-5356AW-5154AAW-5356AW-5356
AW-5356AW-5154AAW-5356AW-5356
AW-5356AW-5154AAW-5356AW-5356
AW-5356AW-5154AAW-5356AW-5356
AW-5356AW-5154AAW-5356AW-5356
AW-5356AW-5154AAW-5356AW-5356
AW-5356AW-5154AAW-5356AW-5356
AW-5356AW-5154AAW-5356AW-5356
AW-5356AW-5554AW-5356
AW-5154A
AW-5356AW-5554AW-5356
AW-5154A
AW-5356AW-5554AW-5356AW-5554
1234
AW-5356AW-5356AW-5356AW-5356
AW-5356AW-5356AW-5356AW-5356
AW-5356AW-5356AW-5356AW-5356
1234
AW-5356AW-5154AAW-5356AW-5356
AW-5356AW-5154AAW-5356AW-5356
AW-5356AW-5154AAW-5356AW-5356
AW-5356AW-5154AAW-5356AW-5356
AW-5356AW-5154AAW-5356AW-5356
AW-5556AAW-5554AW-5356AW-5356
AW-5356AW-5356AW-5356AW-5356
AW-4043AAW-3103
AW-4043AAW-3103
AW-4043AAW-1050AAW-4043AAW-1050A
AW-4043AAW-1050AAW-4043AAW-1050A
AW-4043AAW-1050AAW-4043AAW-1050A
AW-4043AAW-1050AAW-4043AAW-1050A
AW-4043AAW-1050AAW-4043AAW-1050A
AW-4043AAW-1050AAW-4043AAW-1050A
AW-4043AAW-3103
AW-4043AAW-3103
AW-4043AAW-3103
AW-4043AAW-3103
AW-4043AAW-3103
AW-4043AAW-3103
AW-5356AW-5356AW-5356AW-5356
AW-5356AW-5356AW-5356AW-5356
AW-5356AW-5356AW-5356AW-5356
AW-5154AAW-5154AAW-5356
AW-5154A
FILLER WIRES FOR JOINING SIMILAR / DISSIMILAR ALUMINIUM ALLOYS
Line 1. Max Strength. Line 2. Max Corrosion Resistance. Line 3. Freedom from Cracking. Line 4. Best Colour Match when Anodising
PLEASE NOTE THESE TABLES ARE FOR GUIDANCE ONLY
FOR TECHNICAL ASSISTANCE PHONE OUR HELPLINE 01925 839983
Unit 5, Melford Court,Hardwick GrangeWoolstonWarrington WA1 4RZ
Tel: 01925 839983 Fax: 01925 839990Email: [email protected]: www.westbrookwelding.co.uk
This brochure indicates our main Product Range, many others are available on request.
Images courtesy of BINZEL México and www.sxc.hu
AEROSPACE ALLOYS
ClassificationFSHWG PRODUCTS
AFNOR AMS AWS NF EN DMD-DMR MSRR OTHERALLOYS
ALUM
INIU
MST
AIN
LESS
STE
ELN
ICKE
LTI
TAN
IUM
CO
BALT
OTH
ERS
MIG/TIG ALCU6
MIG/TIG ALMG4Z2
MIG/TIG ALS17
MIG/TIG ALS15
MIG/TIG ALSI12
AU6 4191 ER 2319 - - 9500,45 -
AG4Z2 - ER 5280 - - - -
AS7G06 4246 ER 357 - 34,545 - -
AS5 4190 ER 4043 - 34,562 9500,32 -
AS12 4185 ER 4047 - - 9500,31 -
MIG/TIG 17,4 CU
MIG/TIG 347
MIG/TIG 410
MIG/TIG N155
MIG/TIG Z12CNDV12
Z5CNU 17,4,4 5825 ER 630 - 34,229 9500,240 -
Z6CNNb20, 10 5680 ER 347 1,4551 - 9500,2 -
Z8C13 5776 ER 410 1,4009 - 9500,205 -
Z12CNKDW20 5794 - - 34,222 9500,214 -
Z12CNDV12 - - - - - -
MIG/TIG NASTX
MIG/TIG HASTW
MIG/TIG NI263
MIG/TIG NI625
MIG/TIG NI718
NC22FeD 5798 ER NiMo2 - 34,491 9500,215 GE B50A450
ND24FeC 5786 ER NiMo3 - 34,493 9500,19 -
NCK20KTA 5966 - - 34,442 9500,16 GE B50A783
NC22DNb 5837 ER NiCrMo3 2,4831 34,436 9500,237 -
NC19FeNb 5832 ER NiFeCr2 2,4667 34,424 9500,220 GE B50TF202
MIG/TIG T 40
MIG/TIG T 60
MIG/TIG TA6V4
ASTM Gr 2 4951 ER Ti2 3,7035 34,071 9500-70 -
ASTM Gr 4 - ER Ti4 3,7065 - - -
ASTM Gr 5 4954 ER Ti6A14V 3,7165 34,776 9500,73 -
MIG/TIG CO 188
MIG/TIG FICO25
MIG/TIG CO 694
MIG/TIG CO T800
MIG/TIG CO 414
KCN22W 5801 - - 34,408 - -
KC20WN 5796 - - 34,415 9500,23 -
KC28W - - - 34,070 - -
KD28C - - - 34,071 - GE B50TF193
KC29NW - - - - - -
MIG/TIG CO 918 KC20NTa 5814 - - - - GE B50A824
MIG/TIG AZ92A
MIG/TIG BMS
MIG/TIG F66S
MIG/TIG MARVAL 8S
MA9 4395 AZ92A - - 9500,23 -
8CrMo12 - - - 34,173 - 8CD12
25CrMo4 - - - 34,174 -
X2NiCoMoTi8-8 6501 - - - - MAR 250
MIG/TIG SCVS 15CrMoV6 - - - 34,172 -
25CD4
15CDV6
WESTBROOKWELDING ALLOYS LTD.