wet mop selection guide - harper brush · astm mops identified as meeting the astm (american...

16
MOPS

Upload: others

Post on 19-May-2021

11 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Wet mop selection guide - Harper Brush · ASTM Mops identified as meeting the ASTM (American Society for Testing and Material) International stan-dards are constructed in adherence

MOPS

Page 2: Wet mop selection guide - Harper Brush · ASTM Mops identified as meeting the ASTM (American Society for Testing and Material) International stan-dards are constructed in adherence

Wet mop selection guide

Mopping is more than a one mop fits all activity — the key is to choose the right typeof yarn/material for your floor care need. Harper® carries a variety of wet mops for every appli-cation, enabling you to have maximum efficiency and value.

YYaarrnn ttyyppeeFiber Advantages Use

Cotton Good absorption and General use. Scrubbing andretention. Limited cleaning up liquids. Break-inshrinkage. Low initial cost. period required.

Rayon or Non-linting. Holds finish Applying waxes and floornylon yet releases easily. finishes.

Synthetic Good performance, price All applications.blends and durability. Color

options. Excellentabsorption.

Microfiber Highly absorbent. Lasts Scrubbing and cleaning.longer. Launderable. Must launder separately

from linting materials.

CCuutt--eenndd vvss llooooppeedd--eenndd

Cut-end mops have a lower purchase price and are initially more eco-nomical. Cut-end mops should not be laundered, as they will fray andunravel, leaving behind loose strands and lint.

Looped-end mops outlast cut-end mops. The tailband style gives bettermopping coverage, and the looped-ends prevent fraying and unravel-ing. Launderable. Ability to launder looped-end adds value.

BBaanndd wwiiddtthh//ssttyyllee

Wide band Narrow band Screw-on

Vinyl coated mesh. Can be Textured polyester tape Textured polyester tape with metalused as a scrubber. 5" width 11⁄4" width threaded T-bar. 11⁄4" width

AASSTTMMMops identified as meeting the ASTM (American Society for Testing and Material) International stan-dards are constructed in adherence to the ASTM F2368 Standard Specification. Known for their hightechnical quality and market relevancy, ASTM International standards play an important role in the infor-mation infrastructure that assures you are getting a quality product, per the specifications set forth.

Page 3: Wet mop selection guide - Harper Brush · ASTM Mops identified as meeting the ASTM (American Society for Testing and Material) International stan-dards are constructed in adherence

Table of Contents

1

Page

Wet mopsCotton, cut-end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Synthetic blend, cut-end . . . . . . . . . . . . . . . . . . . . . . . . .3Cotton, looped-end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Synthetic blend, looped-end . . . . . . . . . . . . . . . . . . . . .5Microfiber, MicroTube® . . . . . . . . . . . . . . . . . . . . . . . . . . .5Microfiber, pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Terry cloth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Deck/yacht . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Sponge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Finish mopsRayon, looped-end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Nylon, looped-end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Lambswool applicators . . . . . . . . . . . . . . . . . . . . . . . . . . .8Synthetic applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Dust mopsCotton, cut-end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Cotton, looped-end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Synthetic, cut-end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Microfiber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Microfiber mop adaptors . . . . . . . . . . . . . . . . . . . . . . . .10Terry cloth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Handles and accessoriesWire frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Aluminum platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Dust mop handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Wet mop handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

© 2009, Harper Brush Works, Inc.

Page 4: Wet mop selection guide - Harper Brush · ASTM Mops identified as meeting the ASTM (American Society for Testing and Material) International stan-dards are constructed in adherence

2

Wet mops — cotton

Harper® yarn mops come in a wide variety of styles, sizes and materials. The three primary styles are cut-end, looped-end and screw-on. Sizesare measured in either numbers, ounces or small, medium, large and extra-large (S, M, L, XL). Material options are cotton, rayon, nylon, syn-thetic blend, or microfiber. Handles are sold separately (pages 11–12).

2008, 2012, 2016,2020, 2024, 2032n 4-ply cotton.

n 1 1/4" headband.

n No tailband.

No. 8 – #2008No. 12 – #2012No. 16 – #2016No. 20 – #2020No. 24 – #2024 No. 32 – #2032

Select sizes also available inHarper Heavy Duty® pack-aging with UPC for retail.No. 16 – #201601No. 20 – #202001No. 24 – #202401No. 32 – #203201

Assembled with 1 1/8" x54" lacquered wood quick-change handle. HarperHeavy Duty® packagingwith UPC for retail.No. 24 – #202401A

2016FT, 2020FT,2024FT, 2032FTn 4-ply cotton.

n 1 1/4" headband.

n Tailband for tangle-freeuse.

No. 16 – #2016FTNo. 20 – #2020FTNo. 24 – #2024FTNo. 32 – #2032FT

2016T, 2020T,2024T, 2032Tn 4-ply cotton.

n 1 1/4" headband withthreaded T-bar.

n No tailband.

n Screw-on mophead liesflat for more efficientmopping.

No. 16 – #2016TNo. 20 – #2020TNo. 24 – #2024TNo. 32 – #2032T

Cotton, cut-end

20008, 20012,20016, 20020,20024, 20032n 4-ply cotton.

n 1 1/4" headband.

n No tailband.

Meets ASTM F2368standard.

8 oz. – #2000812 oz. – #2001216 oz. – #2001620 oz. – #2002024 oz. – #20024 32 oz. – #20032

20016FT, 20020FT,20024FT, 20032FTn 4-ply cotton.

n 1 1/4" headband.

n Tailband for tangle-freeuse.

Meets ASTM F2368standard.

16 oz. – #20016FT20 oz. – #20020FT24 oz. – #20024FT32 oz. – #20032FT

Cotton, cut-end, true weight

Cotton is extremely absorbent and is generally the most economical.

#202401A

Page 5: Wet mop selection guide - Harper Brush · ASTM Mops identified as meeting the ASTM (American Society for Testing and Material) International stan-dards are constructed in adherence

Wet mops — synthetic blend

3

9016-2, 9020-2,9024-2, 9032-2n 4-ply blend.

n 1 1/4" headband.

n No tailband.

No. 16 – #9016-2No. 20 – #9020-2No. 24 – #9024-2No. 32 – #9032-2

Synthetic blend, cut-end

Synthetic blend, cut-end, true weight

Synthetic blend allows for maximum absorbtion in all applications.

8012, 8016, 8020,8024, 8032n 4-ply blend.

n 1 1/4" headband.

n No tailband.

No. 12 – #8012No. 16 – #8016No. 20 – #8020No. 24 – #8024No. 32 – #8032

No. 16 and No. 24 alsoavailable with HarperHeavy Duty® packagingwith UPC for retail.No. 16 – #351601No. 24 – #352401

8012T, 8016T,8020T, 8024T,8032Tn 4-ply blend.

n 1 1/4" headband withthreaded T-bar.

n No tailband.

n Screw-on mophead liesflat for more efficientmopping.

No. 12 – #8012TNo. 16 – #8016TNo. 20 – #8020TNo. 24 – #8024TNo. 32 – #8032T

8012FT, 8016FT,8020FT, 8024FT,8032FTn 4-ply blend.

n 1 1/4" headband.

n Tailband for tangle-freeuse.

No. 12 – #8012FTNo. 16 – #8016FTNo. 20 – #8020FTNo. 24 – #8024FTNo. 32 – #8032FT

80012, 80016,80020, 80024,80032n 4-ply blend.

n 1 1/4" headband.

n No tailband.

Meets ASTM F2368standard.

12 oz. – #8001216 oz. – #8001620 oz. – #8002024 oz. – #8002432 oz. – #80032

80012FT, 80016FT,80020FT, 80024FT,80032FTn 4-ply blend.

n 1 1/4" headband.

n Tailband for tangle-freeuse.

Meets ASTM F2368standard.

12 oz. – #80012FT16 oz. – #80016FT20 oz. – #80020FT24 oz. – #80024FT32 oz. – #80032FT

Page 6: Wet mop selection guide - Harper Brush · ASTM Mops identified as meeting the ASTM (American Society for Testing and Material) International stan-dards are constructed in adherence

4

Wet mops — cotton, synthetic blend

Synthetic blend, looped-end

160121, 160122,160123, 160124n 4-ply blend.

n 1 1/4" headband.

n Tailband for tangle-freeuse.

S – #160121M – #160122L – #160123XL – #160124

Also available in three colors.

BlueS – #160121-2M – #160122-2L – #160123-2XL – #160124-2

GreenS – #160121-3M – #160122-3L – #160123-3XL – #160124-3

OrangeS – #160121-8M – #160122-8L – #160123-8XL – #160124-8

Medium, blue also availablewith Harper Heavy Duty®packaging with UPC forretail.M – #160201-2

160125, 160126,160127, 160128n 4-ply blend.

n 5" headband.

n Tailband for tangle-freeuse.

S – #160125M – #160126L – #160127XL – #160128

Also available in three colors.

BlueS – #160125-2M – #160126-2L – #160127-2XL – #160128-2

GreenS – #160125-3M – #160126-3L – #160127-3XL – #160128-3

OrangeS – #160125-8M – #160126-8L – #160127-8XL – #160128-8

Large, blue also availablewith Harper Heavy Duty®packaging with UPC forretail.L – #160301-2

Cotton, looped-end

163125, 163126,163127, 163128n 4-ply cotton.

n 5" headband.

n Tailband for tangle-freeuse.

S – #163125M – #163126L – #163127XL – #163128

163121T, 163122T,163123T, 163124Tn 4-ply cotton.

n 1 1/4" headband withthreaded T-bar.

n Tailband for tangle-freeuse.

n Screw-on mophead liesflat for more efficientmopping.

S – #163121TM – #163122TL – #163123TXL – #163124T

Page 7: Wet mop selection guide - Harper Brush · ASTM Mops identified as meeting the ASTM (American Society for Testing and Material) International stan-dards are constructed in adherence

Wet mops — synthetic blend, microfiber

5

T169125, T169126,T169127, T169128n Microfiber.

n 5" headband.

n Tailband for tangle-freeuse.

BlueLight – #T169125-2Medium – #T169126-2Heavy – #T169127-2Ex. Heavy – #T169128-2

GreenLight – #T169125-3Medium – #T169126-3Heavy – #T169127-3Ex. Heavy – #T169128-3

WhiteLight – #T169125-5Medium – #T169126-5Heavy – #T169127-5

T30412, T30418,T30424n Microfiber.

n 5" wide.

n Designed for platformswith hook and loopattachment.

Assorted colors12" – #T30412-018" – #T30418-024" – #T30424-0

Red12" – #T30412-118" – #T30418-124" – #T30424-1

Blue12" – #T30412-218" – #T30418-224" – #T30424-2

Green12" – #T30412-318" – #T30418-324" – #T30424-3

Microfiber, MicroTube®

Synthetic blend, looped-end, rough surfaceSynthetic blend, looped-end, value line

Microfiber, pad

Harper® microfiber wet mops are more absorbent than cotton, and last eight times longer. They are launderable and will withstand 300 wash-ings. The microfiber material will scrub, surround, and lock-in dirt and debris. Handles and accessories sold separately (pages 11–12).

168123-4n 4-ply rough surface

blend.

n 1 1/4" headband.

n Tailband for tangle-freeuse.

L – #168123-4

170121-2, 170122-2,170123-2, 170124-2n 4-ply blend.

n 1 1/4" headband.

n Tailband for tangle-freeuse.

S value line – #170121-2M value line – #170122-2L value line – #170123-2XL value line – #170124-2

Page 8: Wet mop selection guide - Harper Brush · ASTM Mops identified as meeting the ASTM (American Society for Testing and Material) International stan-dards are constructed in adherence

6

Wet mops — deck/yacht/household

Cotton, cut-end

Synthetic, cut-end

Twist n’ Clean

D708, D7010,D7012, D7016,D7024n 4-ply cotton.

n Wire-bound construction.

n 7/8" x 48" handle.

No. 8 – #D708No. 10 – #D7010No. 12 – #D7012No. 16 – #D7016No. 24 – #D7024

No. 12 and No. 16 alsoavailable with HarperHouse® packaging withUPC for retail.No. 12 – #7012No. 16 – #7016

No. 24 available with Harp-er Heavy Duty® packagingwith UPC for retail.No. 24 – #7024

D7040n Cotton.

n Roofer mop.

n 1 1/8" x 60" handle.

No. 40 – #D7040

D7508, D7510,D7512, D7516n 4-ply rayon.

n Wire-bound construc-tion.

n 15/16" x 54" handle.

No. 8 – #D7508No. 10 – #D7510No. 12 – #D7512No. 16 – #D7516

300n Twist n’ Clean mop.

n Cotton, with tailbandsfor tangle-free use.

n Non-abrasive scrubbertip.

n 15/16“ x 54“ handle.

n Harper House® packag-ing with UPC for retail.

#300Refill – #300R

#D7012

#7016

#7024

301n 3-in-1 floor mop.

n Use wet for quick andeasy mopping.

n Terry cloth cover ismachine washable.

n Plastic frame with 60"metal handle.

n Harper House® packag-ing with UPC for retail.

#301Refill – #301R

Terry cloth

Page 9: Wet mop selection guide - Harper Brush · ASTM Mops identified as meeting the ASTM (American Society for Testing and Material) International stan-dards are constructed in adherence

308n Household roller mop.

n Synthetic sponge.

n Plastic casing with twobrush strips.

n Harper House® packag-ing with UPC for retail.

9 1/2" – #308Refill – #308R

303n Large butterfly mop.

n Cellulose sponge.

n Metal wringer with steel rod.

n Harper House® packag-ing with UPC for retail.

9" – #303Refill – #303R

Wet mops — sponge

7

302n Economy squeeze mop.

n Synthetic/foam sponge.

n Plastic wringer.

n Harper House® packag-ing with UPC for retail.

9" – #302Refill – #302R

6013n Jumbo roller mop.

n Cellulose sponge.

n Metal casing.

n Harper House® packag-ing with UPC for retail.

12" – #6013Refill – #6113

99078n Deluxe squeeze mop.

n Cellulose sponge.

n Metal wringer with rub-berized grip.

n Harper House® packag-ing with UPC for retail.

8 1/2" – #99078Refill – #99078R

311n PVA roller mop.

n PVA sponge.

n Plastic casing , metalrod.

n Harper House® packag-ing with UPC for retail.

10" – #311Refill – #311R

Page 10: Wet mop selection guide - Harper Brush · ASTM Mops identified as meeting the ASTM (American Society for Testing and Material) International stan-dards are constructed in adherence

8

Finish mops/applicators

4016, 4020, 4024, 4032n 3-ply nylon.

n 1 1/4" headband.

n Tailband for tangle-free use.

No. 16 – #4016 No. 20 – #4020No. 24 – #4024 No. 32 – #4032

166121, 166122, 166123,166124n 4-ply blue/white striped rayon.

n 1 1/4" headband.

n Tailband for tangle-free use.

S – #166121 M – #166122L – #166123 XL – #166124

Medium and Large also available withHarper Heavy Duty® polybag with UPCfor retail.M – #350201 L – #350301

166121T, 166122T, 166123T,166124Tn 4-ply blue/white striped rayon.

n 1 1/4" headband with threaded T-bar.

n Tailband for tangle-free use.

n Screw-on mophead lies flat for moreefficient mopping.

S – #166121T M – #166122TL – #166123T XL – #166124T

Nylon, looped-end Nylon is ideal for spreading waxes and other floor finishes.

Rayon, looped-end Rayon is ideal for spreading waxes and other floor finishes. Handles are sold separately (pages 11–12).

T0012, T0014, T0016, T0018n Premium 3/4" lambswool pile.

n Sleeved pad with wood block.

n Threaded handle hole.

12" – #T0012 14"– #T001416" – #T0016 18"– #T0018

Refill pads:12" – #T0012R 14"– #T0014R16" – #T0016R 18"– #T0018R

Lambswool Lambswool applicators are ideal for applying waxes, sealers and finishes. Handles are sold separately.

Synthetic Synthetic lambswool applicators are ideal for applying waxes, sealers and finishes. Handles are sold separately.

T0012S, T0014S, T0018Sn Economical synthetic lambswool.

n Sleeved pad with wood block.

n Threaded handle hole.

12" – #T0012S 14"– #T0014S18" – #T0018S

Refill pads:12" – #T0012SR 14"– #T0014SR18" – #T0018SR

440010, 440012, 440014,440016, 440018, 440024n 100% lambswool.

n 2-piece wood blocks attached withwing nuts.

n Threaded handle hole.

10" – #440010 12" – #44001214" – #440014 16" – #44001618" – #440018 24" – #440024

Refill pads:10" – #430010 12" – #43001214" – #430014 16" – #43001618" – #430018 24" – #430024

460010, 460012, 460014,460016, 460018, 460024n Natural-colored synthetic pile.

n 2-pc wood blocks attached withwing nuts.

n Threaded handle hole.

10" – #460010 12" – #46001214" – #460014 16" – #46001618" – #460018 24" – #460024

Refill pads:10" – #450010 12" – #45001214" – #450014 16" – #45001618" – #450018 24" – #450024

Page 11: Wet mop selection guide - Harper Brush · ASTM Mops identified as meeting the ASTM (American Society for Testing and Material) International stan-dards are constructed in adherence

Dust mops

9

Cotton, cut-end — Handles and frames are sold separately (pages 11–12).

Cotton, looped-end Synthetic, cut-end

DM518, DM524DM530, DM536DM548n Premium cotton dust

mop.

n Fabric back with snapclosures.

n Fits 5" metal frames.

18" – #DM51824" – #DM52430" – #DM53036" – #DM53648" – #DM548

40618, 40624,40630, 40636,40648, 40660,40672n Premium cotton dust

mop.

n Fabric back with snapclosures.

n Fits 5" metal frames.

18" – #4061824" – #4062430" – #4063036" – #4063648" – #4064860" – #4066072" – #40672

Select sizes also available inHarper Heavy Duty® pack-aging with UPC for retail.

24" – #4060136" – #40602

Assembled with 24" x 5"metal frame and 15/16" x60" wood handle withmetal swivel quick releaseconnector. Harper HeavyDuty® packaging with UPCfor retail.

24" - #40601A

JDM524D,JDM536Dn Disposable cotton dust

mop.

n Plastic back with tie closures.

n Fits 5" metal frames.

24" – #JDM524D36" – #JDM536D

321n Power Pivot electrostat-

ic dust mop.

n Fabric back with zip closure.

n Assembled with plasticframe and 70" tele-scoping handle withswivel connection.

n Harper House® packag-ing with UPC for retail.

13" - #321Refill - #321R

40818, 40824,40836, 40848n Electrostatic synthetic

dust mop.

n Fabric back with snapclosures.

n Fits 5" metal frames.

Red 18"– #40818-124"– #40824-136"– #40836-148"– #40848-1

Blue 18"– #40818-224"– #40824-236"– #40836-248"– #40848-2

Green 18"– #40818-324"– #40824-336"– #40836-348"– #40848-3

Yellow 18"– #40818-424"– #40824-436"– #40836-448"– #40848-4

#40624

#40601A

Page 12: Wet mop selection guide - Harper Brush · ASTM Mops identified as meeting the ASTM (American Society for Testing and Material) International stan-dards are constructed in adherence

10

Dust mops

Terry cloth

Microfiber

301n 3-in-1 Floor Mop.

n Use dry for dustingwide areas.

n Terry cloth cover ismachine washable.

n Plastic frame with 60"metal handle.

n Harper House® packag-ing with UPC for retail.

#301Refill - #301R

T40418-3, T40424-3,T40436-3, T40448-3n Microfiber.

n 5" wide, rectangular.

n For use with aluminumplatform.

n Withstands 300 washings.

Green18" – #T40418-324" – #T40424-336" – #T40436-348" – #T40448-3

T40718SK-2,T40724SK-2,T40736SK-2,T40748SK-2,T40760SK-2n Microfiber dust mop

starter kit.

n Three dust mops, plusone adapter.

n For use with 5" metalframes.

Blue18" – #T40718SK-224" – #T40724SK-236" – #T40736SK-248" – #T40748SK-260" – #T40760SK-2

T40718-2, T40724-2,T40736-2, T40748-2,T40760-2n Microfiber.

n 5" wide, oval.

n For use with metalframes and clothadapters.

n Withstands 300 washings.

Blue18" – #T40718-224" – #T40724-236" – #T40736-248" – #T40748-260" – #T40760-2

T40718AD-2,T40724AD-2,T40736AD-2,T40748AD-2,T40760AD-2n Adapter for microfiber

dust mops.

n Attaches quickly withpre-applied hook andloop strips.

n For use with 5" metalframes.

Blue18" – #T40718AD-224" – #T40724AD-236" – #T40736AD-248" – #T40748AD-260" – #T40760AD-2

Adaptors, microfiber mop

Page 13: Wet mop selection guide - Harper Brush · ASTM Mops identified as meeting the ASTM (American Society for Testing and Material) International stan-dards are constructed in adherence

Accessories, handles

11

40618F, 40624F,40630F, 40636F,40648F, 40660F,40672Fn Metal frame for dust

mops.

n 5” wide.

n For use with quickrelease handles.

18” – #40618F24” – #40624F30” – #40630F36” – #40636F48” – #40648F60” – #40660F72” – #40672F

Frames, wire

T30412FP, T30418FP,T30424FP, T30436FP,T30448FPn 4” wide rectangular alu-

minum platform.

n Attaches easily to wetmop or dust mop padswith pre-applied hookand loop strips.

n Pin-lock handle connec-tor for use withT30460H or T30472EHhandles.

12” – #T30412FP18” – #T30418FP24” – #T30424FP36" – #T30436FP48" – #T30448FP

Platforms, aluminum

40660H, 40660H-6n Wood, 1 1/8” diameter.

n Sanded and lacquered.

n Quick release connectorfor metal dust mopframes.

n Metal connector swivelsfor ease of use.

60” - #40660H(Standard pk of 12)

60” - #40660H-6(Standard pk of 6)

T30460Hn Aluminum, 7/8”

diameter.

n Pin-lock connector end.

n Plastic swivel hang-upcap.

n For use with aluminummop platforms.

60” - #T30460H

T30472EHn Aluminum, 1” diameter.

n Pin-lock connector end.

n Plastic swivel hang-upcap.

n For use with aluminummop platforms.

Extends 44” to 75” -#T30472EH

40660Mn Metal, 1” diameter.

n Quick release connectorfor metal dust mopframes.

n Metal connector swivelsfor ease of use.

60” - #40660M

Handles, dust mop

Page 14: Wet mop selection guide - Harper Brush · ASTM Mops identified as meeting the ASTM (American Society for Testing and Material) International stan-dards are constructed in adherence

12

Handles

1020LFn Wood, 1 1/8” diameter.

n Receiving end forscrew-on T-bar wetmops.

n Sanded and lacquered

54” – #1020LF

4815n Wood, 7/8” diameter.

n Metal spring and leverhardware.

n Sanded and lacquered.

48” – #4815

1 1/8" diameter54" – #540S

540Gn Wood, 15/16” diameter.

n Plastic gripper connec-tor.

n Sanded and lacquered.

n For use with 5” head-band wet mops.

54” – #540G

540JRQ-6n Wood, 7/8” diameter.

n Metal quick-changehardware.

n Sanded and lacquered.

48” – #540JRQ-6

1 1/8" diameter54" – #540WQ54" – #273H with blue

painted tip.

540WQMn Metal, 1” diameter.

n Metal quick-changehardware.

n Lightweight.

54” – #540WQM

54054HFG-2,54060HFG-2n Fiberglass, 1” diameter.

n Plastic quick-bite hardware.

n Can be used in foodservice applications.

54”Red – #54054HFG-1Blue – #54054HFG-2Green – #54054HFG-3Yellow – #54054HFG-4White – #54054HFG-5Black – #54054HFG-7

60"Red – #54060HFG-1Blue – #54060HFG-2Green – #54060HFG-3Yellow – #54060HFG-4White – #54060HFG-5Black – #54060HFG-7

54054H, 54060Hn Wood 15/16” diameter.

n Plastic quick-bite hardware.

n Sanded and lacquered.

54” – #54054H60" – #54060H

54054HM-7,54060HM-7n Metal, 1” diameter.

n Plastic quick-bite hardware.

n Lightweight.

54” – #54054HM-760" – #54060HM-7

540WQP-FGn Fiberglass,

15/16” diameter.

n Plastic quick-changehardware.

n Can be used in foodservice applications.

54” – #540WQP-FG

Handles, wet mop

Page 15: Wet mop selection guide - Harper Brush · ASTM Mops identified as meeting the ASTM (American Society for Testing and Material) International stan-dards are constructed in adherence

Product number indexProduct # Page1020LF . . . . . . . . . 12160121 . . . . . . . . . 4160121-2 . . . . . . . 4160121-3 . . . . . . . 4160121-8 . . . . . . . 4160122 . . . . . . . . . 4160122-2 . . . . . . . 4160122-3 . . . . . . . 4160122-8 . . . . . . . 4160123 . . . . . . . . . 4160123-2 . . . . . . . 4160123-3 . . . . . . . 4160123-8 . . . . . . . 4160124 . . . . . . . . . 4160124-2 . . . . . . . 4160124-3 . . . . . . . 4160124-8 . . . . . . . 4160125 . . . . . . . . . 4160125-2 . . . . . . . 4160125-3 . . . . . . . 4160125-8 . . . . . . . 4160126 . . . . . . . . . 4160126-2 . . . . . . . 4160126-3 . . . . . . . 4160126-8 . . . . . . . 4160127 . . . . . . . . . 4160127-2 . . . . . . . 4160127-3 . . . . . . . 4160127-8 . . . . . . . 4160128 . . . . . . . . . 4160128-2 . . . . . . . 4160128-3 . . . . . . . 4160128-8 . . . . . . . 4160201-2 . . . . . . . 4160301-2 . . . . . . . 4163121T . . . . . . . . 4163122T . . . . . . . . 4163123T . . . . . . . . 4163124T . . . . . . . . 4163125 . . . . . . . . . 4163126 . . . . . . . . . 4163127 . . . . . . . . . 4163128 . . . . . . . . . 4166121 . . . . . . . . . 8166121T . . . . . . . . 8166122 . . . . . . . . . 8166122T . . . . . . . . 8166123 . . . . . . . . . 8166123T . . . . . . . . 8166124 . . . . . . . . . 8166124T . . . . . . . . 8168123-4 . . . . . . . 5170121-2 . . . . . . . 5170122-2 . . . . . . . 5170123-2 . . . . . . . 5170124-2 . . . . . . . 5

2008 . . . . . . . . . . . 22012 . . . . . . . . . . . 22016 . . . . . . . . . . . 220008 . . . . . . . . . . 220012 . . . . . . . . . . 220016 . . . . . . . . . . 220016FT . . . . . . . . 220020 . . . . . . . . . . 2

Product # Page20020FT . . . . . . . . 220024 . . . . . . . . . . 220024FT . . . . . . . . 220032 . . . . . . . . . . 220032FT . . . . . . . . 2201601 . . . . . . . . . 22016FT . . . . . . . . . 22016T . . . . . . . . . . 22020 . . . . . . . . . . . 2202001 . . . . . . . . . 22020FT . . . . . . . . . 22020T . . . . . . . . . . 22024 . . . . . . . . . . . 2202401 . . . . . . . . . 2202401A . . . . . . . 22024FT . . . . . . . . . 22024T . . . . . . . . . . 22032 . . . . . . . . . . . 2203201 . . . . . . . . . 22032FT . . . . . . . . . 22032T . . . . . . . . . . 2273H . . . . . . . . . . . 12

300 . . . . . . . . . . . . . 6300R . . . . . . . . . . . 6301 . . . . . . . . . . .6, 10301R . . . . . . . . .6, 10302 . . . . . . . . . . . . . 7302R . . . . . . . . . . . 7303 . . . . . . . . . . . . . 7303R . . . . . . . . . . . 7308 . . . . . . . . . . . . . 7308R . . . . . . . . . . . 7311 . . . . . . . . . . . . . 7311R . . . . . . . . . . . 7321 . . . . . . . . . . . . . 9321R . . . . . . . . . . . 9350201 . . . . . . . . . 8350301 . . . . . . . . . 8351601 . . . . . . . . . 3352401 . . . . . . . . . 3

4016 . . . . . . . . . . . 84020 . . . . . . . . . . . 84024 . . . . . . . . . . . 84032 . . . . . . . . . . . 840601 . . . . . . . . . . 940601A . . . . . . . . . 940602 . . . . . . . . . . 940618 . . . . . . . . . . 940618F . . . . . . . . . 1140624 . . . . . . . . . . 940624F . . . . . . . . . 1140630 . . . . . . . . . . 940630F . . . . . . . . . 1140636 . . . . . . . . . . 940636F . . . . . . . . . 1140648 . . . . . . . . . . 940648F . . . . . . . . . 1140660 . . . . . . . . . . 940660F . . . . . . . . . 1140660H . . . . . . . . . 1140660H-6 . . . . . . . 1140660M . . . . . . . . 1140672 . . . . . . . . . . 9

Product # Page40672F . . . . . . . . . 1140818-1 . . . . . . . . 940818-2 . . . . . . . . 940818-3 . . . . . . . . 940818-4 . . . . . . . . 940824-1 . . . . . . . . 940824-2 . . . . . . . . 940824-3 . . . . . . . . 940824-4 . . . . . . . . 940836-1 . . . . . . . . 940836-2 . . . . . . . . 940836-3 . . . . . . . . 940836-4 . . . . . . . . 940848-1 . . . . . . . . 940848-2 . . . . . . . . 940848-3 . . . . . . . . 940848-4 . . . . . . . . 9430010 . . . . . . . . . 8430012 . . . . . . . . . 8430014 . . . . . . . . . 8430016 . . . . . . . . . 8430018 . . . . . . . . . 8430024 . . . . . . . . . 8440010 . . . . . . . . . 8440012 . . . . . . . . . 8440014 . . . . . . . . . 8440016 . . . . . . . . . 8440018 . . . . . . . . . 8440024 . . . . . . . . . 8450010 . . . . . . . . . 8450012 . . . . . . . . . 8450014 . . . . . . . . . 8450016 . . . . . . . . . 8450018 . . . . . . . . . 8450024 . . . . . . . . . 8460010 . . . . . . . . . 8460012 . . . . . . . . . 8460014 . . . . . . . . . 8460016 . . . . . . . . . 8460018 . . . . . . . . . 8460024 . . . . . . . . . 84815 . . . . . . . . . . . 12

540G . . . . . . . . . . . 12540JRQ-6 . . . . . . . 12540S . . . . . . . . . . . 12540WQ . . . . . . . . . 12540WQM . . . . . . . 12540WQP-FG . . . . 1254054H . . . . . . . . . 1254054HFG-1 . . . . 1254054HFG-2 . . . . 1254054HFG-3 . . . . 1254054HFG-4 . . . . 1254054HFG-5 . . . . 1254054HFG-7 . . . . 1254054HM-7 . . . . . 1254060H . . . . . . . . . 1254060HFG-1 . . . . 1254060HFG-2 . . . . 1254060HFG-3 . . . . 1254060HFG-4 . . . . 1254060HFG-5 . . . . 1254060HFG-7 . . . . 1254060HM-7 . . . . . 12

Product # Page6013 . . . . . . . . . . . 76113 . . . . . . . . . . . 7

7012 . . . . . . . . . . . 67016 . . . . . . . . . . . 67024 . . . . . . . . . . . 6

8012 . . . . . . . . . . . 38012FT . . . . . . . . . 38012T . . . . . . . . . . 38016 . . . . . . . . . . . 38016FT . . . . . . . . . 38016T . . . . . . . . . . 38020 . . . . . . . . . . . 38020FT . . . . . . . . . 38020T . . . . . . . . . . 38024 . . . . . . . . . . . 38024FT . . . . . . . . . 38024T . . . . . . . . . . 38032 . . . . . . . . . . . 38032FT . . . . . . . . . 38032T . . . . . . . . . . 380012 . . . . . . . . . . 380012FT . . . . . . . . 380016 . . . . . . . . . . 380016FT . . . . . . . . 380020 . . . . . . . . . . 380020FT . . . . . . . . 380024 . . . . . . . . . . 380024FT . . . . . . . . 380032 . . . . . . . . . . 380032FT . . . . . . . . 3

9016-2 . . . . . . . . . 39020-2 . . . . . . . . . 39024-2 . . . . . . . . . 39032-2 . . . . . . . . . 399078 . . . . . . . . . . 799078R . . . . . . . . . 7

D708 . . . . . . . . . . . 6D7010 . . . . . . . . . . 6D7012 . . . . . . . . . . 6D7016 . . . . . . . . . . 6D7024 . . . . . . . . . . 6D7040 . . . . . . . . . . 6D7508 . . . . . . . . . . 6D7510 . . . . . . . . . . 6D7512 . . . . . . . . . . 6D7516 . . . . . . . . . . 6

DM518 . . . . . . . . . 9DM524 . . . . . . . . . 9DM530 . . . . . . . . . 9DM536 . . . . . . . . . 9DM548 . . . . . . . . . 9

JDM524D . . . . . . . 9JDM536D . . . . . . . 9

T0012 . . . . . . . . . . 8T0012R . . . . . . . . . 8T0012S . . . . . . . . . 8T0012SR . . . . . . . . 8T0014 . . . . . . . . . . 8

Product # PageT0014R . . . . . . . . . 8T0014S . . . . . . . . . 8T0014SR . . . . . . . . 8T0016 . . . . . . . . . . 8T0016R . . . . . . . . . 8T0018 . . . . . . . . . . 8T0018R . . . . . . . . . 8T0018S . . . . . . . . . 8T0018SR . . . . . . . . 8

T169125-2 . . . . . . 5T169125-3 . . . . . . 5T169125-5 . . . . . . 5T169126-2 . . . . . . 5T169126-3 . . . . . . 5T169126-5 . . . . . . 5T169127-2 . . . . . . 5T169127-3 . . . . . . 5T169127-5 . . . . . . 5T169128-2 . . . . . . 5T169128-3 . . . . . . 5

T30412-0 . . . . . . . 5T30412-1 . . . . . . . 5T30412-2 . . . . . . . 5T30412-3 . . . . . . . 5T30412FP . . . . . . 11T30418-0 . . . . . . . 5T30418-1 . . . . . . . 5T30418-2 . . . . . . . 5T30418-3 . . . . . . . 5T30418FP . . . . . . 11T30424-0 . . . . . . . 5T30424-1 . . . . . . . 5T30424-2 . . . . . . . 5T30424-3 . . . . . . . 5T30424FP . . . . . . 11T30436FP . . . . . . 11T30448FP . . . . . . 11T30460H . . . . . . . 11T30472EH . . . . . . 11

T40418-3 . . . . . . . 10T40424-3 . . . . . . . 10T40436-3 . . . . . . . 10T40448-3 . . . . . . . 10T40718-2 . . . . . . . 10T40718AD-2 . . . . 10T40718SK-2 . . . . . 10T40724-2 . . . . . . . 10T40724AD-2 . . . . 10T40724SK-2 . . . . . 10T40736-2 . . . . . . . 10T40736AD-2 . . . . 10T40736SK-2 . . . . . 10T40748-2 . . . . . . . 10T40748AD-2 . . . . 10T40748SK-2 . . . . . 10T40760-2 . . . . . . . 10T40760AD-2 . . . . 10T40760SK-2 . . . . . 10

Page 16: Wet mop selection guide - Harper Brush · ASTM Mops identified as meeting the ASTM (American Society for Testing and Material) International stan-dards are constructed in adherence

Harper Brush Works, Inc.Corporate Headquarters:400 North Second StreetFairfield, IA 52556-2416 USA

Phone: 800.223.7894Fax: 641.472.3187www.harperbrush.com

Customer Service:Phone: 800.500.9351Fax: 877.894.4591

HSA0919

Quality Cleaning ToolsSince 1900