what is made in greece for the compact muon solenoid m.barone
DESCRIPTION
What is made in Greece for the Compact Muon Solenoid M.Barone Institute of Nuclear Physics DEMOKRITOS-Athens. s = 14 TeV (7 times higher than Tevatron/Fermilab) search for new massive particles up to m ~ 5 TeV - PowerPoint PPT PresentationTRANSCRIPT
What is made in Greece for the Compact Muon Solenoid
M.Barone
Institute of Nuclear Physics
DEMOKRITOS-Athens
• s = 14 TeV (7 times higher than Tevatron/Fermilab) search for new massive particles up to m ~ 5 TeV• Bunch crossing rate = 25 ns (~20 times higher than Tevatron)
• Ldesign = 1034 cm-2 s-1 (>102 higher than Tevatron/Fermilab)
22 interactions / BC 1400 particles / 25 ns• Rejection for Higgs search = 1013 (104 higher than Tevatron/Fermilab)
The The CompactCompact Muon Solenoid Muon Solenoid
ATLAS
CMS
Overview of CMS detector
Two Multipurpose Maintenance Platforms built by
TEMKA
4 Grease Pads made by METALLO
MABs
These light(~20kg.)carbon fibre structures are holding many active elements of the muon aligment system and guarantee their long term stable positions with respect to each other under working conditions at CMS.
36 MABs were produced by IMMG in Greece.
Particle interactions in detectorsParticle interactions in detectors
Nexans HellasNexans Hellas-100 km of special electrical cables for -100 km of special electrical cables for
CMSCMS
The CMS DetectorThe CMS Detector
50005000 Hybrid Frond End Hybrid Frond End cards for CMS by cards for CMS by
Prisma S.A & PantechnicalPrisma S.A & Pantechnical
Global Trigger EmulatorGlobal Trigger Emulator
Features8 TTC Partitions
LEMO Triggers sTTS inputs
8 DAQ Partitions aTTS inputs &
outputsTrigger generation
from 8Hz .. 500 kHz in random or clocked mode
trigger rulesLHC bunch
structureMonitoring counters
Not used during MTCC …
... but before
test and prepare the DAQ System
GTPe I/O module and two trigger fan-out modulesGTPe I/O module and two trigger fan-out modules
SummarySummary
•The GTPe has been designed and build in NCSR Demokritos•GTPe is a hardware emulator of the real GTP with its full capabilities apart LV1 connectivity•It has been tested in the lab and in real conditions at CERN.•It is an indispensable tool:
•for the development of TriDAS particularly concerning the partitioning•for the DAQ installation, when the real GTP will not be available.•For the DAQ upgrades during the operation of the experiment
•“The Global Trigger Processor Emulator for the CMS experiment” was accepted for publication in the IEEE Transactions on Nuclear Science
“sT
TS
”_IN
“sT
TS
”_IN
aTT
S_O
UT
Designed by I. Michailakis5 sets manufactured by:Alpha PCB (Megara)
GTPe
GIII board
S-LINK64 CMCGTPe-IO CMC
(INP design)
The GTPe firmware runs on the GIII FPGA and it was designedby our Group Using the Quartus and DK1 packages.
GTPe EVM receiver
GTPe-IO
aTTS/ sTTS/status
S-LINK64 cable
L1A
from GTPe to
GTPe
Conclusions
• An MoU for 5 Mchf has been signed with the CMS Collaboration.
• The items presented have a value of about
2.5 Mchf.