what is the anyridge way? · • esthetic design & varied abutment selection • super...

Characteristics & AdvantagesI. Design ConceptII. Surgery III. Prosthetics IV. Maintenance

Fixture Product & PackageI. Dimension II. Size III. Package

Cover Screw & Healing Abutment

Abutment & Prosthetic optionsI. Fixture level Prosthesis II. Abutment level Prosthesis 1. Solid Abutment & Components 2. Multi-unit Abutment & ComponentsIII. Overdenture Prosthesis 1. Meg-Rhein Abutment & Components

AnyRidge® Surgical KitI. Surgical KitII. Prosthetics KitIII. BonEx KitIV. Bone Profiler KitV. Optional components

Extra Option ProductsI. i-GenII. MEGA ISQIII. MEG-TORQIV. 911 Kit

Clinical cases www.ausmegagen.com.au

Have you made the PARADIGM SHIFT yet?Do it the AnyRidge way!

What is the AnyRidge way?

For clinicians…less invasive, fast,

simple, predictable, & esthetically

superior implant treatment

Realising theONE-DAY ImplantTM

For patients…strong new esthetic &

functional teeth via painless & rapid

treatment

AnyRidge does it right!AnyRidge goes FAR BEYOND standard expectations of dental implants…

The key benefits of AnyRidge implants become evident when considering immediate loading…

With the new loading protocol developed based on clinical results with AnyRidge, your patients have new smiles faster than ever….

• Guaranteed excellent stability, even with compromised bone density• Less reduction & more preservation of cortical bone• Wider implant possibilities than crestal width• Clinically proven safety • Faster & stronger osseointegration• Esthetic design & varied abutment selection• Super implant-prosthetic connection• Innovative R2GATE software for completing implant & prosthesis in ONE DAY

AnyRidge – a new design standard on the global stageLaunched in 2009 as a biologically-inspired implant concept, AnyRidge consistently surpasses clinical benchmarks

– 055054 AnyRidge®

Small but Strong Abutment ScrewDiameter 1.8mm

Thicker abutment wallMore favorable for path adjustment

Optimum post taper✔ Different taper according to post diameter (8°, 10°, 12°, 14°)✔ Wider diameter has more taper!

Various cuff height2.0, 3.0, 4.0, 5.0mm

Single connectionAbutment can be used on any size of fixture

Wider fixture in a narrow crestMaximizes long-term survival of a fixture

No cutting edge, but strong self-threading✔ Sharp cutting flutes slice and widen bone gradually.✔ No wobbling on cortical slope in anterior immediate placement case.

Various post height4.0, 5.5, 7.0, 9.0mm

Flexibility of 1mm1mm trimmable margin gives restorative

flexibility without changing B-L dimension

Biologic S-lineBiologic S-line provides

seamless natural-lookingemergence profile

Maximum preservation of cortical bone

Important for esthetics and long-term prognosis

Narrow diameterWider fixture into a small osteotomy socket (less invasive surgery) is important to pre-serve marginal hard and soft tissues.

Taper designEasy to place always guarantees

excellent initial stability

Knife-ThreadsOffer progressive bone condensing, ridge expansion, maximized compressive force

resistance, and minimized shear force production.

Characteristics & Advantages » Ⅰ. Design Concept

I. Design ConceptCharacteristics & Advantages


➲

➲

➲

➲ ➲ ➲

Lance Drill

Stopper Drill 2.8

AnyRidge® Fixture 5.0

Lance Drill

Stopper Drill 2.8

Stopper Drill 3.3

Marking Drill 3.8

AnyRidge® Fixture 4.0

II. Surgery

• AnyRidge® system has no fixed drilling protocol, just make your own protocol based on patient’s bone quality to attain preferred initial stability or simply drill an osteotomy socket to given conditions and then decide the diameter of a fixture.

Example 1) Ø5.0mm fixture can be placed 2.9mm osteotomy socket in D4 bone. Excellent initial stabil-ity can be attained

Example 2) In hard one, it is highly recommended to make a socket almost same diameter size as a fixture

• Improved drill design has simplified drilling sequence, you can even harvest autogenous bone using these specially designed drills. (Recommended speed : 50 RPM, 50 Ncm with saline solution irrigation)

• The best way to get ideal initial stability with AnyRidge system is placing a fixture using a surgical engine, leaving one or two treads above the crest; then use ratchet wrench to place the platform at the desired position.

• Soft bone The super self-tapping threads have a single core diameter that facilitates minimal site preparation by utilizing a smaller osteotomy to place a wider fixture with special threads.

• Hard bone AnyRidge® Fixture with its super self-tapping thread design is easier than other traditional implants at hard bone. *Caution! : The osteotomy socket (drilling) size should almost reach the size of fixture to avoid getting stuck in the bone during placement.

1. Fixture placement

Easy way to avoid stuck in the bone during AnyRidge implant placement1. Due to extremely strong initial stability of AnyRidge fixture, it can be stuck in the middle during placement especially in mandibular hard bone. Please consider ‘One millimeter Rule’ to avoid this in the best and easiest way. Clinician can customize the drilling sequence once he fully understand the concept and characteristics of AnyRidge system to get preferred initial stability. ‘One millimeter Rule’ is simple; if an implant engine (40Ncm) stops leaving one millimeter above the crest, use ratchet wrench to screw it down to preferred position. We recommended to place implant platform 0.5~1.0mm under the crest.

2. If a fixture stucks in the middle leaving more than 1mm above the crest in hard mandibular bone, it is recommended to remove it using a wrench rather than trying to screw it down with excessive torque. Please use a cortical bone drill that is included in a surgical kit, the depth of cortical bone drilling can be adjusted according to the bone condition. Then, place the same fixture into the osteotomy socket.

<1mm >1mm1mm 1mm

1 2

2. Customized drilling Sequence

Excellent initial stability, even at compromised bone density. AnyRidge® Fixture cuts bone smoothly and condenses it simultaneously.

Characteristics & Advantages » Ⅱ. SurgeryCharacteristics & Advantages » II. SurgeryCharacteristics & Advantages » I. Design Concept

Characteristics & Advantages » III. ProstheticsCharacteristics & Advantages » III. Prosthetics


Separation force between fixture and abutment after cold welding.

(n=5)

25.36

49.49

Company A1.5° Connection

AnyRidge5° Connection

Company B 8° Connection

11.46

A

B

AnyRidge

Ⅲ. Prosthetics

• Magic Five (5° Internal connection) Now you can be free from screw loosening with our unique connection (5 degree morse taper) which gives perfect hermetic sealing. Biologic width is minimized due to no micro gap, and crestal bone health is well maintained.

Helps to achieve beautiful, natural-looking esthetics.

Feel AnyRidge connection. It starts with impression taking and lasts until final restoration.

Every case, every shape, every size. Everything was considered to satisfy every need.

Better esthetic outcomes from wide variety of prosthetic options!Stop worrying about screw loosening!

Performed Retention Test to evaluate the fixture-abutment retention force using Universal Testing Machine-R&D center in MegaGen Implant Co.,Ltd.(2009)-

1. No screw loosening, less biologic width!

2. Biologic S-line

3. Optimum hex height

4. All indications, various abutment options

Characteristics & Advantages » Ⅲ. Prosthetics

VariousPost Heights

Complete Hermetic Seal Cuff Height

S-line

[SEM Image] Magic Five Connection : 5° Morse Taper



1. All transitional and temporary components have ‘Ledges’ on the bottom

2. All permanent abutments will make strong connections with fixtures, even with finger force!

• Cover Screws, Healing Abutments, Impression Coping (transfer and pick-up type), Temporary Cylinders have ledges on the bottom which prevent from cold welding with a fixture.• Hand Drivers(1.2 Hex) or Impression Drivers can be used easily to screw these components in and out.

• 25~35Ncm is recommended to connect a permanent abutment into a fixture.

• A fixed abutment cannot be removed with finger force even after complete removal of Abutment Screw because of perfect cold welding. To remove a permanent abutment, Abutment Removal Driver should be used.

▸▸ Two different connections between a fixture & a component

Characteristics & Advantages » IV. Maintenance Characteristics & Advantages » III. Prosthetics


Due to extremely strong connection force, you don’t have to worry about screw loosening. Please use our special ‘removal driver’ when you want to remove an abutment from a fixture.


Hand Driver (1.2 Hex)(Refer to Page.349)

Abutment Removal Driver

(Refer to Page.350)

1

4 5 6

2 3

1. Use a Hand Driver(1.2 Hex) to unscrew Abutment Screw.2. Continue to turn counter-clockwisely until you feel a click of disengagement.3. Push down Hand Driver once again to catch and fix Abutment Screw.4. Lift up Hand Driver lightly and continue to turn counter-clockwisely until Abutment Screw engages with the inner screw of Abutment.5. Remove Abutment Screw completely from the abutment6. Insert an ‘Abutment Removal Driver’ and continue to turn clockwise until the abutment comes out of fixture. You can feel some resistance during screw-down of the Abutment

Removal Driver, but don’t worry, simple exert is needed disconnect the abutment from the fixture.

▸▸ How to remove Permanent Abutment from Fixture?


300.0

250.0

200.0

150.0

100.0

50.0

0.03.5

AnyRidge

4.0 6.0 (n=8)

Diameter

kgf

0

5

-5

15

25

35

45

2 4 6

Stre

ss(M

Pa)

Length (mm)

AnyRidge 4.5 x 10mm

AnyRidge 5.5 x 10mm

Company OS

Company NB

- Less insertion torque- Excellent initial stabilization- Resistance to compressive force- Minimal Shear force creation- Higher BIC

- Round faced and narrow thread design

Stress Distribution (Fixture-Bone)Cortical Bone Thickness - 0.8mmCancellous bone level - D4

EZ Plus Rescue

300.0

250.0

200.0

150.0

100.0

50.0

0.03.5

AnyRidge

4.0 6.0 (n=8)

Diameter

kgf

0

5

-5

15

25

35

45

2 4 6

Stre

ss(M

Pa)

Length (mm)

AnyRidge 4.5 x 10mm

AnyRidge 5.5 x 10mm

Company OS

Company NB




EZ Plus Rescue

300.0

250.0

200.0

150.0

100.0

50.0

0.03.5

AnyRidge

4.0 6.0 (n=8)

Diameter

kgf

0

5

-5

15

25

35

45

2 4 6

Stre

ss(M

Pa)

Length (mm)

AnyRidge 4.5 x 10mm

AnyRidge 5.5 x 10mm

Company OS

Company NB




EZ Plus Rescue

300.0

250.0

200.0

150.0

100.0

50.0

0.03.5

AnyRidge

4.0 6.0 (n=8)

Diameter

kgf

0

5

-5

15

25

35

45

2 4 6

Stre

ss(M

Pa)

Length (mm)

AnyRidge 4.5 x 10mm

AnyRidge 5.5 x 10mm

Company OS

Company NB




EZ Plus Rescue

Ⅳ. MaintenanceUnique and sturdy design provides long-term stability!

1. Higher cortical bone preservation is guaranteed

AnyRidge does not depend on cortical bone for initial stability; decreased stress on corti-cal bone helps to prevent bone resorption after implantation.

• More cortical bone = More soft tissue volume = Beautiful gingival line Advanced coronal design allows maximum cortical bone preservation around implants. Beyond osseointegration, AnyRidge can assure beautiful gingival line by preserving and maintaining more cortical bone.

• A Human Biopsy (2.5 yrs after placement)The sharp and high alveolar crest (yellow arrow) could be maintained due to biology driven implant design. With this maintenance of alveolar bone, the peri-implant marginal gingiva showed almost no recession during 2.5 years of follow-up, even in the case of limited ridge width.

Performed Finite element analysis to evaluate the fixture-bone stress using ABAQUS 6.8 -R&D center in MegaGen Implant Co.,Ltd.(2009)-

Characteristics & Advantages » Ⅳ. Maintenance

II. Size

Small Ø3.5- Cover Screw included.• Availability of 7mm product is subject to local approval.• Europe certified only(CE). Not for Korean domestic

users.

Regular Ø4.0- Cover Screw included.• Availability of 7mm product is subject to local approval.• Europe certified only(CE). Not for Korean domestic

users.

Regular Ø4.5- Cover Screw included.• Availability of 7mm product is subject to local approval.

3.5

7 FANIHX3507C

8.5 FANIHX3508C

10 FANIHX3510C

11.5 FANIHX3511C

13 FANIHX3513C

15 FANIHX3515C

4.0

7 FANIHX4007C

8.5 FANIHX4008C

10 FANIHX4010C

11.5 FANIHX4011C

13 FANIHX4013C

15 FANIHX4015C

4.5

7 FANIHX4507C

8.5 FANIHX4508C

10 FANIHX4510C

11.5 FANIHX4511C

13 FANIHX4513C

15 FANIHX4515C

Fixture

Diameter (mm) Length(mm) Ref.C

Fixture


Fixture


4.0

4.4

4.9

L

L

L

2.8

3.3

3.3

3.5

4.0

4.5

Fixture Product & Package » II. SizeFixture Product & Package » I. Dimension


[SEM image]

Fixture Product & Packaging » Ⅰ. Dimension

I. Dimension Fixture Product & Packaging

Ø3.3 3.53.8

4.0

Ø3.8 4.0 4.5

Ø4.0 4.25 4.75

Ø4.3 4.5 5.0

Ø4.8 5.0 5.5

Core(mm)

Platform(mm)

Bevel (mm)

Widest thread diameter is0.5mm wider than fixture size at 3.5mm0.4mm wider than fixture size at 4.0~8.0mm *For example Ø3.5 = Fixture diameter + 0.5mm Ø4.0~Ø8.0 = Fixture diameter + 0.4mm

Widest Thread Diameter

Bevel Diameter

Platform Diameter

Fixture Diameter

Narrow apical Diameter

Core

Length*Actual length of fixtureCore Ø3.3~4.3 fixture : 0.8mm shorter than the written lengthCore Ø4.8 fixture : 0.6mm shorter than the written length

Ø3.5 : 1.6mmØ4.0~5.5 : 1.8mmØ6.0~8.0 : 3.0mm

Important concept!It has been proven that 0.5~1.0mm subcrestal placement shows better crestal bone response. With AnyRigde system, a fixture goes down to the ideal position without further drilling avoiding damage to important anatomic structures.

Core diameter measured at 3.5mm under the platform

Platform Diameter

BevelDiameter

Female screw1.8mm diameter X 0.35mm pitch

Internal Hex : 2.3mm(Same in all fixtures)

3 different sizes - 3.5mm fixture : 3.5mm(platform) / 3.8mm(bevel) - 4.0~5.5mm fixture : 3.5mm(platform) / 4.0mm(bevel) - 6.0~8.0mm fixture : 5.0mm(platform) / 5.5mm(bevel)

Platform diameterBevel diameter

Ø6.0~Ø8.0 Ø4.0~Ø5.5 Ø3.5

Relationship between platform diameter and bevel diameter

Super Wide Ø7.5- Cover Screw included.


7.5

7 FALIHX7507C

8.5 FALIHX7508C

10 FALIHX7510C

11.5 FALIHX7511C

13 FALIHX7513C

8.0

7 FALIHX8007C

8.5 FALIHX8008C

10 FALIHX8010C

11.5 FALIHX8011C

13 FALIHX8013C

Fixture


Fixture


L

L

8.4

7.9

4.8

4.8

8.0

7.5


7.0

7 FALIHX7007C

8.5 FALIHX7008C

10 FALIHX7010C

11.5 FALIHX7011C

13 FALIHX7013C

Fixture


L

4.8

7.0

7.4

Fixture Product & Package » II. Size

Fixture Size

Wide Ø5.5- Cover Screw included.




Wide Ø5.0- Cover Screw included.

5.5

7 FANIHX5507C

8.5 FANIHX5508C

10 FANIHX5510C

11.5 FANIHX5511C

13 FANIHX5513C

15 FANIHX5515C

6.0

7 FALIHX6007C

8.5 FALIHX6008C

10 FALIHX6010C

11.5 FALIHX6011C

13 FALIHX6013C

6.5

7 FALIHX6507C

8.5 FALIHX6508C

10 FALIHX6510C

11.5 FALIHX6511C

13 FALIHX6513C

Fixture


Fixture


Fixture


L

L

L

5.9

3.3

5.5

4.8

6.5

6.9

4.8

6.0

6.4

5.0

7 FANIHX5007C

8.5 FANIHX5008C

10 FANIHX5010C

11.5 FANIHX5011C

13 FANIHX5013C

15 FANIHX5015C

Fixture


3.3

5.0

5.4

L

Fixture Product & Package » III. Package

III. Package


Additional AnyRidge Fixtures

L

L

5.4

5.9

4.0

4.0

5.0

5.5

AnyRidge has Core 4 Implant

4.0 4.0

Ø 3.5 Ø 4.0 Ø 4.5 Ø 5.0 Ø 5.5 Ø 6.0 Ø 6.5 Ø 7.0 Ø 7.5 Ø 8.0

2.8 3.3 3.3 3.3 3.3 4.8 4.8 4.8 4.8 4.8

This is a fixture that has improved the unstable elements in the current fixture line-up for safer dental implant practice in hard bone case; you will experience its excellence if you use it for following cases.

• If there is sufficient ridge or large osteotomy socket• If it is hard to place a deep-threaded fixture due to high bone density• If the habitual occlusal force of a patient is considered as higher than the average

Thin Ridge Normal Ridge

Core3.3

Core3.3

Core4.0


Fixture Product & Packaging » Ⅲ. Packaging

Ⅲ. Packaging

Fixture

Cover Screw

Peel off cover & remove ampule

Make sure fixture is fully connected, then remove from ampule

Use hand driver to pick up cover screw

Place fixture according to drilling sequence

Tighten cover screw to fixtureSeparate fixture ampule from bottom, as shown, to reveal cover screw holder③

MegaGen ampule! Re-usable as building block *after cleaning and sterilization! less plastic waste!

Flip open top to reveal fixture

Connect handpiece to fixture

Separate top① & bottom②, as shown, to reveal inner ampule with fixture

①

③

②

→⤴

⤹

→

- Ampule

Wide Ø5.5_Core Ø4- Cover Screw included.

Wide Ø5.0_Core Ø4- Cover Screw included.

5.5

7 FANIHX5507SC

8.5 FANIHX5508SC

10 FANIHX5510SC

11.5 FANIHX5511SC

13 FANIHX5513SC

15 FANIHX5515SC

Fixture


5.0

7 FANIHX5007SC

8.5 FANIHX5008SC

10 FANIHX5010SC

11.5 FANIHX5011SC

13 FANIHX5013SC

15 FANIHX5015SC

Fixture


Abutment & Prosthetic Options » I. Fixture Level Prosthesis

(Refer to Page.260)



Cover Screw* Included in the fixture package.

• Use with a Hand Driver(1.2 Hex).• Used for submerged type surgery.• Protects the inner structure of a fixture.• Different heights can be chosen according to the position of fixture below the crest.• 1.6mm and 2.6mm height of Cover Screw

can be purchased separately.• Recommend torque : by hand (5 - 8Ncm)

Healing Abutment• Use with a Hand Driver(1.2 Hex).• Used for non-submerged type surgery or for

two stage surgery.• Choose appropriate diameter and height of

Healing Abutment according to situation.• Helps to form suitable emergence profile during period of gingival healing.• Recommend torque : by hand (5 - 8Ncm)

Ø3.5

0.8 AANCSF3508

1.6 AANCSF3516

2.6 AANCSF3526

Ø5.0 0.5 AANCSF5005

Ø6.0 0.5 AANCSF6005

Ref.C

Ø4.0

3 AANHAF0403

4 AANHAF0404

5 AANHAF0405

6 AANHAF0406

7 AANHAF0407

8 AANHAF0408

9 AANHAF0409

Ø5.0

3 AANHAF0503

4 AANHAF0504

5 AANHAF0505

6 AANHAF0506

7 AANHAF0507

8 AANHAF0508

9 AANHAF0509

Ø6.0

3 AANHAF0603

4 AANHAF0604

5 AANHAF0605

6 AANHAF0606

7 AANHAF0607

8 AANHAF0608

9 AANHAF0609

Ø7.0

3 AANHAF0703

4 AANHAF0704

5 AANHAF0705

6 AANHAF0706

7 AANHAF0707

8 AANHAF0708

9 AANHAF0709

Ø8.0

3 AANHAF0803

4 AANHAF0804

5 AANHAF0805

6 AANHAF0806

7 AANHAF0807

8 AANHAF0808

9 AANHAF0809

Ø10.0

3 AANHAF1003

4 AANHAF1004

5 AANHAF1005

6 AANHAF1006

7 AANHAF1007

8 AANHAF1008

9 AANHAF1009


Height

ProfileDiameter Height

(mm) Ref.C ProfileDiameter

Height(mm) Ref.C

P.D

P.D

Platformlevel

H


ProfileDiameter

Height(mm)


Abutment & Prosthetic Options » Ⅰ. Fixture Level Prosthesis

(Refer to Page.350)

Zirconia Abutment

CCM Abutment EZ Post Abutment Milling Abutment Angled Abutment

Temporary Abutment [Metal] Fuse Abutment

Lab Analog

Transfer Impression Coping Driver

(Refer to Page.352 )

Impression Coping [Transfer]

Impression Coping [Pick-Up]

Healing Abutment


Cover Screw

Gold Abutment

Abutment & Prosthetic OptionsⅠ. Fixture Level Prosthesis

Zirconia Abutment

EZ Post Abutment Angled Abutment

Temporary Abutment [Metal] Fuse Abutment

Lab Analog

Transfer Impression Coping Driver

Impression Coping [Transfer]

Impression Coping [Pick-Up]

Healing Abutment


Cover Screw

Gold Abutment

Temporary Abutment(Titanium)- Multi Post Screw(AANMSF) included.

• For making provisional restoration.• Grooved on the post allows strong resin adherence.• Recommend torque : 25Ncm

Fuse Abutment- Straight, 15°, 25° ; Multi Post Screw(AANMSF) included + Fuse Cap included.- Milling ; Multi Post Screw(AANMSF) included.

• Recommend torque : 25Ncm

Ø4.0 2Hex AANTMH4012T

Non-Hex AANTMN4012T

ProfileDiameter

Cuff Height(mm) Type Ref.C

Ø5.5

Ø5.5

3

5.5 Straight AFAP5535P

Ø4.5 715° AFAA5315P

25° AFAA5325P

Diameter

Labio-lingual

Mesio-distal

C.H(mm)

P.H(mm) Ref.CType

Ø4.0

Ø5.0

Milling

Mesio-distal

Mesio-distal

Labio-lingual

C.H

P.H

Labio-lingual

10

11

Platformlevel

Platformlevel

2

1

Hex

HexHex

Non-Hex

15° 25°

Lab AnalogØ3.5 Magenta AANLAF35

Ø4.0 ~ Ø5.5 Blue AANLAF4055

Ø6.0 ~ Ø8.0 Yellow AALLAF6080

Profile Diameter Color Ref.C


Impression Coping (2-piece, Transfer Type)(For Closed-tray Technique)• Streamlined shape ; easy to transfer.• Anti-rotation grooves match with hex structure of fixtures.• Should be tightened with Impression Driver • Special impression coping screw which can be used

with a 1.2mm hex driver is available on request.

Impression Coping (1-piece, Transfer Type)(For Closed-tray Technique)• Should be tightened with Impression Driver• Special impression coping screw which can be used

with a 1.2mm hex driver is available on request.

Impression Coping (2-piece, Pick-up Type)(For Open-tray Technique)- Guide Pins : AANGPP0010 (7mm : Short) / AANGPP0015 (12mm : Long) / AANGPP0020 (20mm : Extra-long)

• Square structure ; strong anti - rotation function.• Designed for easy and accurate pick-up impression.• Extra-long guide pin can be purchased separately.

16

127

16

P.D


Lab Analog & Temporary Abutments

Ø4.012

1-Piece

AANITN4012

16 AANITN4016

Ø5.012 AANITN5012

16 AANITN5016

Ø4.012

1-PieceHand driver

(1.2 Hex)

AANITN4012H

16 AANITN4016H

Ø5.012 AANITN5012H

16 AANITN5016H

Ø4.012

2-Piece

AANITH4012T

16 AANITH4016T

Ø5.012 AANITH5012T

16 AANITH5016T

Ø4.012

2-PieceHand driver

(1.2 Hex)

AANITH4012HT

16 AANITH4016HT

Ø5.012 AANITH5012HT

16 AANITH5016HT

ProfileDiameter

Height(mm) Type Ref.C

ProfileDiameter


Ø4.0

12

2-Piece

AANIPH4012T

16 AANIPH4016T

12 AANIPN4012T

16 AANIPN4016T

Ø5.0

7 AANIPH5007T

12 AANIPH5012T

7 AANIPN5007T

12 AANIPN5012T

12

3

P.D

Platformlevel

12

P.D

16

Platformlevel

ProfileDiameter


Impression Copings

EZ Post Abutment- Multi Post Screw(AANMSF/AANMST) included.

• Use with a Hand Driver (1.2 Hex).• Esthetic gold coloring.• Two different post heights. (5.5, 7.0mm)• Four different profile diameters.

(Ø4.0, 5.0, 6.0, 7.0)• Four different cuff heights.

(2.0, 3.0, 4.0, 5.0mm)• Recommend torque : 35Ncm


force causing movement of 100μm on a fixture which was placed securely into adequate density of bone without defect. First, AnyRidge implants were placed into the internationally recognized standard bone block with more 40Ncm torque force and an abutment was connected on each implant. Instron equipment was used to measure the force to move a fixture 100μm. The average force was 220N (22.4 kgf). Therefore, if the new temporary abutment can be fractur under this force, it might protect the fixture from movement or failure.

From this experiment, we could developed a special temporary abutment which has lower fracture threshold of less than 200 N (20.4 kgf). It was named as Fuse Abutment. Also it has an anatomic profiles to make temporary prosthetics more esthetic.

Fuse Abutment ™

In 1992, Brunski JB. reported that the implant may has a higher possibility of fibrointergration than osseointegration between bone and implant surface when movements of more than100um occur on the fixture during osseointegration period. (John B. Brunski, Biomechanical factors affecting the bone-dental implant interface. Clinical Materials, Vol. 10, 153-201) Therefore, the implant was needed to protected not to move when immediate loading is carried out. However, it is not easy to manage loading on the fixture, even when we used a resin temporarily with a titanium cylinder. It was thought that it was partly because of the metal component of temporary cylinder, which can deliver excessive forces to the fixture. This was one of the reasons which made clinicians hesitate the immediate loading procedure. So it was necessary to develop a special temporary cylinder. It should have been broken under the force which could lead fibrointegration or failure of osseointegration to protect the fixture. and it would be preferred if it was easy to make a temporary crown on this particular temporary cylinder. We tried to measure the

Similar to acustomized abutmentfor excellent esthetics!

Perfect margin fitwith a prosthetic cap

Scalloped outline

Various Angle :Straight 15° 25°

S-line

Elliptical Occlusal view like a natural tooth

Average < 180N

Disp

lacem

ent(m

m)

Force(N)

Micro-movement test of implant

Fuse Abutment

area

0 50

0.1

0.2

0.3

0.4

0.5

100 150 200 250 350 400 450 500

D1

D2

D3

D4

300

Com

pres

sive

stre

ngth

(N)

Displacement(mm)

Compressive strength test of Fuse Abutment

0

50

100

150

200

250

1 2

Specimen 2Specimen 3Specimen 4Specimen 5

Specimen 1

Design concept of Fuse Abutment™

Why ‘Fuse Abutment’ is the essential partner for a temporary crown?

Rationale of Fuse Abutment™

Mesio-distal

Labio-lingual

Performed compressive strength test to evaluate the micro movement for bone density using universal testing machine -R&D center in Megagen Implant Co.,Ltd.(2012)-

Performed compressive strength test to evaluate the yield strength for Fuse Abutment using universal testing machine-R&D center in Megagen Implant Co.,Ltd.(2012)-


Ø4.0

2

5.5

Hex

AANEPH4025L

3 AANEPH4035L

4 AANEPH4045L

5 AANEPH4055L

2

7

AANEPH4027L

3 AANEPH4037L

4 AANEPH4047L

5 AANEPH4057L

Ø4.0

2

5.5

Non-Hex

AANEPN4025L

3 AANEPN4035L

4 AANEPN4045L

5 AANEPN4055L

2

7

AANEPN4027L

3 AANEPN4037L

4 AANEPN4047L

5 AANEPN4057L

Ø5.0

2

5.5

Hex

AANEPH5025L

3 AANEPH5035L

4 AANEPH5045L

5 AANEPH5055L

2

7

AANEPH5027L

3 AANEPH5037L

4 AANEPH5047L

5 AANEPH5057L

Ø5.0

2

5.5

Non-Hex

AANEPN5025L

3 AANEPN5035L

4 AANEPN5045L

5 AANEPN5055L

2

7

AANEPN5027L

3 AANEPN5037L

4 AANEPN5047L

5 AANEPN5057L

Ø6.0

2

5.5

Hex

AANEPH6025L

3 AANEPH6035L

4 AANEPH6045L

5 AANEPH6055L

2

7

AANEPH6027L

3 AANEPH6037L

4 AANEPH6047L

5 AANEPH6057L

Ø6.0

2

5.5

Non-Hex

AANEPN6025L

3 AANEPN6035L

4 AANEPN6045L

5 AANEPN6055L

2

7

AANEPN6027L

3 AANEPN6037L

4 AANEPN6047L

5 AANEPN6057L

Ø7.0

2

5.5

Hex

AANEPH7025L

3 AANEPH7035L

4 AANEPH7045L

5 AANEPH7055L

2

7

AANEPH7027L

3 AANEPH7037L

4 AANEPH7047L

5 AANEPH7057L

Ø7.0

2

5.5

Non-Hex

AANEPN7025L

3 AANEPN7035L

4 AANEPN7045L

5 AANEPN7055L

2

7

AANEPN7027L

3 AANEPN7037L

4 AANEPN7047L

5 AANEPN7057L

ProfileDiameter

CuffHeight(mm)

Post Height(mm) Type Ref.C

P.D

P.H

C.H

Platformlevel

Hex Non-Hex

ProfileDiameter

CuffHeight(mm)


Abutment Options (Continued)

Angled Abutment- Multi Post Screw(AANMSF/AANMST) included.

• Two different angulations. (15°, 25°)• Four different profile diameters.

(Ø4.0, 5.0, 6.0, 7.0)• Four different cuff heights. (2, 3, 4, 5mm)• Can cover 12 different directions.

[six to the surface(Hex), six to the edge of hex(Hex-E)]

• Esthetic gold coloring.• Minimized screw head length needs minimum

height to prevent milling problems.• Recommend torque : 35Ncm


Gold Abutment - Multi Post Screw(AANMSF/AANMST) included.

• Useful to make a customized abutment in difficult situations.

• Precious only.• Melting point of gold alloy : 1400 - 1450°C• Threaded sleeves for convenient Resin / Wax-up.• Recommend torque : 30Ncm


Ø4.0

2

7

Hex

15°

AANAAH4215L

3 AANAAH4315L

4 AANAAH4415L

5 AANAAH4515L

2

Hex-E

AANAAE4215L

3 AANAAE4315L

4 AANAAE4415L

5 AANAAE4515L

2

Hex

25°

AANAAH4225L

3 AANAAH4325L

4 AANAAH4425L

5 AANAAH4525L

2

Hex-E

AANAAE4225L

3 AANAAE4325L

4 AANAAE4425L

5 AANAAE4525L

Ø5.0

2

7

Hex

15°

AANAAH5215L

3 AANAAH5315L

4 AANAAH5415L

5 AANAAH5515L

2

Hex-E

AANAAE5215L

3 AANAAE5315L

4 AANAAE5415L

5 AANAAE5515L

2

Hex

25°

AANAAH5225L

3 AANAAH5325L

4 AANAAH5425L

5 AANAAH5525L

2

Hex-E

AANAAE5225L

3 AANAAE5325L

4 AANAAE5425L

5 AANAAE5525L

Ø6.0

2

7

Hex

15°

AANAAH6215L

3 AANAAH6315L

4 AANAAH6415L

5 AANAAH6515L

2

Hex-E

AANAAE6215L

3 AANAAE6315L

4 AANAAE6415L

5 AANAAE6515L

2

Hex

25°

AANAAH6225L

3 AANAAH6325L

4 AANAAH6425L

5 AANAAH6525L

2

Hex-E

AANAAE6225L

3 AANAAE6325L

4 AANAAE6425L

5 AANAAE6525L

Ø7.0

2

7

Hex

15°

AANAAH7215L

3 AANAAH7315L

4 AANAAH7415L

5 AANAAH7515L

2

Hex-E

AANAAE7215L

3 AANAAE7315L

4 AANAAE7415L

5 AANAAE7515L

2

Hex

25°

AANAAH7225L

3 AANAAH7325L

4 AANAAH7425L

5 AANAAH7525L

2

Hex-E

AANAAE7225L

3 AANAAE7325L

4 AANAAE7425L

5 AANAAE7525L

ProfileDiameter

CuffHeight(mm)

Post Height(mm) Type Angle Ref.C

P.D

15° 15°25° 25°

P.H

C.H

Platformlevel

Hex-E Hex

ProfileDiameter

CuffHeight(mm)

Post Height(mm) Type Angle Ref.C

Ø4.0 1 11Hex AANGAH4012L

Non-Hex AANGAN4012L

ProfileDiameter

CuffHeight(mm)


Hex Non-Hex

P.H

C.H

P.D

Platformlevel

Abutment Options (Continued)

CCM Abutment - Multi Post Screw(AANMSF/AANMST) included.

• Useful to make a customized abutment in difficult situations. • Can be casted with non-precious alloys(Ni-Cr, Cr-Co alloys). • Non-precious melting temperature : Depend on Manufacturer• Threaded sleeves for convenient Resin / Wax-up. • Melting temperature of CCM : 1380 - 1420°C• Recommend torque : 35Ncm

Extra EZ Post Abutment- Multi Post Screw(AANMSF/AANMST) included.

• Only when satisfactory emergence profile cannot be obtained due to thin gingiva or shallow positioned fixture.

• Useful when fixture is exposed over the gum line.• AANEEH3335 used for fixture (ø4.0~5.5)• AANEEH4035 used for fixture (ø5.0, ø5.5_Core ø4)

- AANEEH4035 is for the Core Diameter ø4.0mm (Fixture Diameter ø5.0~5.5mm). It also can be used for Fixture Diameter ø 6.0~8.0mm for platform switching.

• AANEEH4835 used for fixture (ø6.0~8.0)• Recommend torque : 35Ncm

Ø3.3

3 5.5

Bevel AANEEH3335L

Ø4.0Platform

AANEEH4035L

Ø4.8 AANEEH4835L

CoreDiameter

Cuff Height

Post Height Type Ref.C

Bevel Platform Platform

5.5 5.5 6.5

P.H

C.H

Platformlevel

Ø4.0 1 11Hex AANCAH4012L

Non-Hex AANCAN4012L

ProfileDiameter

CuffHeight(mm)


Hex Non-Hex

P.H

C.H

P.D

Platformlevel


Multi-unit Abutment[Straight]

Multi-unit AngledAbutment [17°]

Multi-unit AngledAbutment [30°]

Abutment & Prosthetic Options » Ⅱ. Abutment Level Prosthesis

CCM Cylinder

Scan Abutment

Temporary Cylinder

Impression Coping Lab Analog

ZrGen Abutment

For the design concept and rationale of the Multi-unit Abutment, Please refer to page.094

Ⅱ. Abutment Level Prosthesis3-1. Multi-unit Abutment & Components (All-on-4) (N_Type)

[Regular] [Wide]Healing Cap

(Refer to Page.098)



▸▸ Multi-unit AbutmentTM

Multi-unit Abutment Design Concept

MegaGen Implant develops the special abutment named as Multi-unit Abutment, which can be the solution for the edentulous patients. With 4 fixtures placed into patient’s ridge and a hybrid denture on those four fixtures, a patient can recover his or her dental condition almost completely. In most cases, Multi-unit Abutments work in a set of 2 x straight type abutment for anterior position and 2 x angled type abutment on posterior position.

Features

You could see how Multi-unit Abutment functions and what benefits you could get from Multi-unit Abutment are as the followings:

• 2 fixtures which are slantly implanted on posterior position are osseointegrated with cancellous bone. These fixtures function as dispersing vertical load on alveolar bone.

• Multi-unit Abutment is only 4 fixtures + 4 abutments. It means that dental surgeon has enough places for surgery. Therefore, it will be easy to find and place 4 fixtures into ridge where abundant cancellous bone exists.

• A doctor can use graft bone material if a patient dosen’t have enough alveolar bone. However, the slantly placed fixtures can overcome the patient’s insufficient bone by getting good holding strength with this angulation.

• In addition, these angulated fixtures can avoid touching important anatomies, such as mandibular nerve and maxillary sinus.

• All on 4 technique is also possible to do guided surgery using R2GATE Guide with a diagnosis from R2GATE.

Abutment & Prosthetic Options » II. Abutment Level ProsthesisAbutment & Prosthetic Options » II. Abutment Level Prosthesis

II. Abutment Level Prosthesis Multi-unit Abutment & Components (All-on-4) (N_Type)

For the design concept and rationale of the Multi-unit Abutment.


▸▸ Multi-unit Abutment N Type

The solution for the edentulous patients

Benefit Available implant System

Compatibility with others’ Multi-unit level prosthetic components

1. Easy and economical treatment solution for compromised edentulous cases.2. Expensive and time consuming bone graft may not be necessary.3. Multiple angles (0˚, 17˚, 30˚) support different implant insertion paths.4. Universally compatible with other Multi- unit systems.

- AnyRidge Internal- AnyOne Internal- AnyOne External

✓ Post Height ✓ Post Diameter ✓ Post Angle ✓ Abutment Angle ✓ Cuff Height

Prosthetics compatibilityNobel Abutment

Various AnglesStraight, 17°, 30°

ConnectionAnyRidge Internal

AnyOne Internal, External

Post Platform Diameter Ø4.8

Post Height 2.2mm

Various CuffsInternalStraight :1.5, 2.5, 3.5, 4.5mm17°: 2.5, 3.5mm30°: 3.5, 4.5mm

ExternalStraight :1, 2, 3, 4, 5mm17°: 2, 3, 4mm30°: 4, 5mm

Post Angle 44˚

Post Diameter Ø4



➲ Multi-unit Abutment

1.5

1-piece(M1.8)

MUAARN0015C

2.5 MUAARN0025C

3.5 MUAARN0035C

4.5 MUAARN0045C

2.5

Hex

MUAARH1725LC

3.5 MUAARH1735LC

4.5 MUAARH1745LC

2.5

Non-Hex

MUAARN1725LC

3.5 MUAARN1735LC

4.5 MUAARN1745LC

Multi-unit Abutment [AR] - Straight- MUA Straight Carrier (MUASC) included• Recommend torque : 35Ncm

Multi-unit Angled Abutment [AR] - 17°- MUA Screw (MUAARS) included- MUA Angled Carrier (MUAAC) included• Recommend torque : 25Ncm

Multi-unit Angled Abutment [AR] - 30°- MUA Screw (MUAARS) included- MUA Angled Carrier (MUAAC) included• Recommend torque : 25Ncm

Cuff Height (mm)

Cuff Height (mm)

Type

Type

Ref.C

Ref.C

3.5Hex

MUAARH3035LC

4.5 MUAARH3045LC

3.5Non-Hex

MUAARN3035LC

4.5 MUAARN3045LC

Cuff Height (mm) Type Ref.C

Ø4.8

C.H

C.H

17°

C.H

30°




Impression coping (Pick-up)- Guide pin (MUAGP) included• Use to take an impression at the abutment level.• Open tray method.

Non-Hex MUAICT

Multi-unit Abutment(Nobel) MUALA

Connection Ref.C

Head form Ref.C

➲ Components for Multi-unit Abutment (Continued)

11.2

Ø4.8

2.2 44°

1510.7

2

Ø4.8

Lab Analog• Use to duplicate the Multi-unit abutment in the working

model.• Available to use as a RP Analog for 3D printed working

model.

CCM Cylinder- Cylinder Screw (MUAS) 2EA included Non-Hex MUACCML

Connection Ref.C 15

3.4

M1.4

Ø3.3

Ø4.8

Temporary Cylinder- Cylinder Screw (MUAS) included Non-Hex MUATCL

Connection Ref.C 12

3.4

M1.4

Ø3.3

Ø4.8

• Use for fabricating acrylic provisional restoration.• Grooves on the post cylinder allow storing resin adhension.• Back-up screw is included.• Recommend torque : 15Ncm

• Use for fabricating screw retained prostheses with metal reinforced or bar structured overdentures.• Available to cast with non-precious dental alloys

(Ni-Cr, Cr-Co alloys)• Melting temperature of CCM base: 1380 - 1420℃• Back-up screw is included.• Recommend torque : 15Ncm



Healing Cap Set reference codeOrder code : Add “P” after the existing reference codeEx) MUAHCL → MUAHCP

Regular MUAHCL

Wide MUAHCWL

Type Ref.C Healing Cap- Cylinder Screw (MUAS) 2ea included • The size of healing cap can be selected

depending on soft tissue volume or type of restorations.

Regular Wide

4.2 1.71.5 3.4

Ø4.9 Ø4.9Ø6.8

M1.4

Try-in Abutment Set reference codeOrder code : MUTIAAR00P

※ Available Systems : AnyRidge, AnyOne Internal, AnyOne External ※ Kit contains Straight, 17˚ and 30˚ type of Try-in Abutments (1 each)

Try-in Abutment• Cuff height is indicated with laser markings• Straight17˚, 30˚• Non-hex type

Straight 17˚ 30˚

1.52.53.54.5

Straight 1.5 / 2.5 / 3.5 / 4.5 MUTIAAR00C

17˚ 2.5 / 3.5 / 4.5 MUTIAAR17C

30˚ 3.5 / 4.5 MUTIAAR30C

Angle Cuff Marking Ref.C

➲ Components for Multi-unit Abutment




2.0 10 MUD10

1.2 20 MUHD1220

1.2 20 MUARD20

2.0 10 MURAD10

Hex

Hex

Hex

Hex

Length

Length

Length

Length

Ref.C

Ref.C

Ref.C

Ref.C

10

20

Ø4.4

10

20

20

24

29

29

Ø4.4

Hex1.2

Hex1.2

M2.0

Multi-unit Driver• Use to torque straight type Multi-unit Abutments.• Use with a torque wrench (ref code: MTW300A)

Right Angle Driver• Use to torque straight type Multi-unit Abutments.• Use with latch-type handpiece.• Use with Meg-TORQ (ref code: MEG_TORQ)

Hand Driver• Use for abutment screw with 1.2 hex hole.• Use up to 15˚ divergent.• It should use under 30Ncm torque.

Removal Driver • Use for abutment screw with 1.2 hex hole.• Use up to 15˚ divergent.• Exclusively for AnyRidge system.• It should use under 30Ncm torque.

Abutment & Prosthetic Options » II. Abutment Level Prosthesis



• Abutment Screw (M1.8 & M2.0) : 25Ncm • Cylinder Screw (M1.4) : 15Ncm • Straight Abutment (M1.8 &M2.0) : 35Ncm

Instruction for removing abutment screw from Multi-unit abutment [Exclusively for AnyRidge system]

1. Completely unscrew abutment screw by rotating it counterclock wise (approxi- mately 4 rotations are required). It should sue with a Hand Driver (ref code: MUHD1220)

2. Pull the Hand Driver up straight until it is visible through abutment crew hole. Shaking left and right may be required if the screw becomes stuck inside of the abutment hole.

3. Slightly rotate the screw to the main access hole. Otherwise the screw could fall back into the screw hole due to distur bance of abutment structure.

4. Remove abutment with the Removal Driver (ref code: MUARD20) by rotating it clockwise.

Driver Tightening Torque Guide

1. Multi-unit Abutment Remover Driver

FractureLocation

< 30Ncm < 30Ncm

FractureLocation

2. Multi-unit Hand Driver

• Excessive torque more than 30Ncm may cause fracturing of the driver.• Straight type Multi-unit abutment needs to use the Multi-unit Driver that is provided in the starting package. (ref code: MUD10)• Strongly recommended to pick up the abutment screw by pressing the Hand Driver to remove the abutment screw from the

Multi-unit abutment.

▸▸ Screw & Abutment Tightening Torque Guide




30º 7 MUSG70

Angle Marking Length(mm) Ref.CSurgical Guide

• The distance between the lines is 7mm• Put center pin after initial drilling at the centric

of arch. (Refer to the surgical protocol on page.104)

770

14

10

30˚

Ø2.0

▸▸ How to use Surgical Guide

※ As Canine and second premolar are most commonly used, the surgical guide has thicker lines for easier identification. ※ The surgical guide is able to use for first molar depending on surgical plan.

Bend to use

[Packing]

LabelProduct

Instruction for use

2 35

4

6

➲ Components for Multi-unit Abutment




▸▸ Multi-unit Abutment Set Contents

Straight

AnyRidge

Angle 17˚ Angle 30˚

Cuff 1.5mm2.5mm3.5mm4.5mm

Cuff 2.5mm 3.5mm 4.5mm

Cuff 3.5mm 4.5mm

Impression Coping

Lab Analog

Temporary Cylinder

HealingCap

(Regular)OR CCM

Cylinder

Multi-unit Abutment Healing cap type Set reference codeOrder code : Add “HP” after the existing reference codeEx) MUAARH1725LC → MUAARH1725 HP

Multi-unit Abutment CCM type Set reference codeOrder code : Add “P” after the existing reference codeEx) MUAARH1725LC → MUAARH1725 P




▸▸ Surgical ProtocolConventional Surgery

1. Initial drilling 2. Guide Bending & Position

8. Impression 9. Healing Cap

7. Tightening the AbutmentAbutment Screw tighten-ing Torque : 25Ncm After connecting Abutment Screw, remove Carrier from Abutment. For 17 ̊ abut-ment, you need to tighten it by tilting Driver about 5.̊ Connect Abutment and check the path using Carrier.

Straight Abutment tight-ening Torque : 35Ncm After removing Carrier, connect Abutment to the Fixture using Right Angle Driver or MUA Driver.

For placement of center pin after initial drilling in the centric of the arch. The drill-ing hole should be in lingual area of the arch to ensure the best result.

Bend according to the patient’s arch.

Take an impression with an individual tray. (Open tray method is strongly recom-mended to avoid any error in the future.)

Cylinder Screw tighten-ing Torque : 15NcmPlace Healing Cap on top of Multi-unit abutment, and connect Cylinder Screw with the Hand Driver.



3. Drilling

6. Abutment Selection

10. Suture

Drill according to the surgical plan.

4. The fixture is implantedPlace implant fixtures ac-cording to the surgical plan and do not exceed torque value (60Ncm)

Select the appropriate set after checking the angu-lation and cuff height that were measured with the Try-in abutment. Con-nect the abutment onto the fixture and check the angulation and the cuff height.

5. Try-in AbutmentUsing the laser marking on the Try-in abutment, select the appropriate cuff height and angulation of Multi-unit abutments.



▸▸ Surgical ProtocolGuided Surgery

1. GuidePlace a R2GATE Guide.

2. Narrow Crest Drill

9. Connect Temporary Cylinder in the back

10. Setting Temporary and Denture

8. Setting Temporary and Denture 7. Connect Temporary Cylinder in the frontReline the temporary denture with resin to fill the space around the Temporary Cylinder.

Connect the Temporary Cylinders in the front. Make sure that holes in the denture are free from any contact with the Temporary Cylinder. Adjust the holes until there is no contact between the denture and the Temporary Cylinder. *If the Temporary Cylinder is fixed using Guide Pin, resin flow into access hole will be prevented.

For the cases with narrow ridge or placing a fixture slanted on the lingual side, you can flatten the surface and drill stably without slipping

Connect rest of the Temporary Cylinders in the back, make sure that the holes in the denture are free from any contact with the Temporary Cylinder. Adjust the holes until there is no contact between the denture and the Tempo-rary Cylinder.

All temporary cylinders are picked up in the denture with resin.



3. DrillingDrill according to the drilling sequence.

4. Fixture Placement

5. Try-in Abutment6. Abutment Selection

13. Finish11. Temporary Fixation 12. Tighten the Denture

Select the appropriate set after checking the angulation and cuff height that were measured with the Try-in abutment. Connect the abutment onto the fixture and check the angulation and the cuff height.

Using the laser marking on the Try-in abutment, select the appropriate cuff height and angulation of Multi-unit abutments.

Remove Denture and fill up the bottom and other non-resin filled parts with resin and completely fix Temporary Cylinder.

Cylinder Screw tightening Torque : 15Ncm Set Denture onto Multi-unit Abutment and tighten cylinder

Close Hole using EZ Seal and finalize the surgery.


Abutment & Prosthetic Options » Ⅲ. Overdenture Level Prosthesis

Retentive Cap set (Dynamic)

Retentive Cap set

Lab Analog

Impression Coping

Meg-Rhein Abutment

Ⅲ. Overdenture Prosthesis5. Meg-Rhein Abutment & Components


➲ Meg-Rhein Overdenture System


Meg-Rhein Overdenture System- 1 Meg-Rhein Abutment- 1 Plastic Impression Coping- 1 Stainless Steel Housing- 1 Protective Disk- 5 Retentive Caps (Black-Lab, Yellow-0.6kgf, Pink-1.2kgf, White-1.8kgf, Violet-2.7kgf)

• Perfect compatibility with the Rhein83 from Italy.• Recommend torque : 15Ncm.

0 ADR00P

1.0 ADR01P

2.0 ADR02P

3.0 ADR03P

4.0 ADR04P

5.0 ADR05P

6.0 ADR06P

Cuff Height (mm) Ref.C

C.H

Stainless Steel Housing & Black Cap

Meg-Rhein Abutment with Plastic Impression Coping

Yellow Cap & Pink Cap

White Cap & Violet Cap

Protective Disk

8.8

Meg-Rhein Overdenture System(Dynamic)- 1 Meg-Rhein Abutment- 1 Plastic Impression Coping- 1 Stainless Steel Housing (Dynamic) & Black-Lab- 1 Protective Disk- 4 Retentive Caps (Yellow-0.6kgf, Pink-1.2kgf, White-1.8kgf, Violet-2.7kgf)

• Perfect compatibility with the Rhein83 from Italy.• Recommend torque : 15Ncm.

0 ADR00PA

1.0 ADR01PA

2.0 ADR02PA

3.0 ADR03PA

4.0 ADR04PA

5.0 ADR05PA

6.0 ADR06PA

Cuff Height (mm) Ref.C

C.H

Stainless Steel Housing (Dynamic) & Black Cap

Meg-Rhein Abutment with Plastic Impression Coping

Yellow Cap & Pink Cap

White Cap & Violet Cap

Protective Disk

8.8


▸▸ Overdenture System

Advantages

4.4mm 4.8mm

2.1mm 2.2mm

30º

Violet(2.7kgf)

White(1.8kgf)

Pink(1.2kgf)

Yellow(0.6kgf)

Small & Easy-to-Use Housing System

Normal Dynamic

Tilting Angle

Various Retentive Caps of the Meg-Rhein

Low Reduction Rate & Uniform Variance of Retentive Force

50º

100

80

60

40

20

0Meg-Rhein Product K

Before After (1,000cycles)

Product L Product P

Ret

entiv

e fo

rce

(kgf

) 3

2

1

01,000 Cycles

R2=0.85

27%

7349%

51

38%

62

37%

63

R2(Coefficient of determination) becomes more reliable when it is close to “1”.




➲ Components for Meg-Rhein Abutment

Stainless Steel Housing• 5ea/pack MHP

Ref.C

RCVP

Ref.C Retentive Caps (Violet)• Violet cap(2.7kg) - For refill (5ea/pack).• Can be used for more retentive force following

white cap(1.8kgf).

RCWP

Ref.C Retentive Caps (White)• White cap(1.8kg) - For refill (5ea/pack).• Can be used for more retentive force following pink

cap(1.2kgf).

RCPP

Ref.C Retentive Caps (Pink)• Pink cap(1.2kgf) - For refill (5ea/pack).

RCYP

Ref.C Retentive Caps (Yellow)• Yellow cap(0.6kgf) - For refill (5ea/pack).

RCBP

Ref.C Retentive Caps (Black)• For laboratory

Stainless Steel Housing (Dynamic)• 5ea/pack

THP

Ref.C



Stainless Impression Coping (Pick-Up)• 2ea/pack.• Italy - Rhein 83 products.• For accurate (pick-up type) impression.• Metal with groove design to prevent from swaying.

044CAIN

Ref.C 5.5

085IAC

Ref.C

83

40

Retentive Cap Insertion Tool• Retentive Cap insertion tool.

091EC

Ref.C

90

Retentive Cap Removal Tool• Retentive Cap removal tool.

PLA

Ref.C Lab Analog


Why will AnyRidge work in any ridge?

Wider fixture in a narrow crestTo maximize long term survival of implants.

Narrow upperdiameter To maximize preservation by minimizing stress on the cortical bone.

Knife-Threads· For smooth insertion and stronger primary stability. · No cuting edge for minimum invasion. · Ideal for soft bone cases.

Narrow apicaldiameter For easier fixture insertion into a narrow ridge split incision

Tapered bodyExcellent for simple installationand Immediate loading.

· For faster, stronger osseointegration.· New surface technology incorporating Ca2+ ions on the SLA treated surface.· 100% elimination of any remaining acid from the conventional SLA process.

final restoration

Case1 Case2

– 347346

Hand DriverRatchet Connector

Ratchet Connector

HandpieceConnector

HandpieceConnector

Cortical Bone Drill

Torque WrenchTorque Wrench

Lance Drill

Drill Extension

Path Finder(for pre-placed fixtures)

Direction Indicator(for osteotomy sockets)

Path Finder(for pre-placed fixtures)

Direction Indicator(for osteotomy sockets)



Trephine BurPoint Trephine Bur

llirD gni kr aM

llir D gni kr aM

llir D r eppot S

Cortical Bone Drill

Drill Extension

Lance Drill

Hand Driver

Ratchet

AnyRidge Kit » Ⅱ. Surgical Kit

Ⅱ. AnyRidge Surgical Kit : Full Type

KARIN3001

Ref.C

Easier and safer to drill for the depth as you need with the stopper drills.

MegaGen Kit – 347346

Ø2.0 Long MGD100L

Diameter Type Ref.C

Ø2.0

18

TANTDF2018

Ø2.5 SD2518S

Ø2.8 SD2818S

Ø3.3 TANSDF3318

Ø3.8 TANSDF3818

Ø4.3 TANSDF4318

Ø4.8

15

TANSDF4815

Ø5.4 TANSDF5415

Ø5.9 TANSDF5915

Diameter Length (mm) Ref.C

Ø2.0

7 TANTDF2007

8.5 TANTDF2008

10 TANTDF2010

11.5 TANTDF2011

Ø2.8

7 SD2807M

8.5 SD2808M

10 SD2810M

11.5 SD2811M

Ø3.3

7 TANSDF3307

8.5 TANSDF3308

10 TANSDF3310

11.5 TANSDF3311

Ø3.8

7 TANSDF3807

8.5 TANSDF3808

10 TANSDF3810

11.5 TANSDF3811

Ø4.3

7 TANSDF4307

8.5 TANSDF4308

10 TANSDF4310

11.5 TANSDF4311

Ø4.8

7 TANSDF4807

8.5 TANSDF4808

10 TANSDF4810

11.5 TANSDF4811

L

L

D



Lance Drill• Useful to make an indentation on cortical bone to confirmtheexactdrillinglocation.

Marking Drill• Eachdrillhascalibrationsfrom7.0to18.0mm.(TANSDF4815,TANSDF5415,TANSDF5915have calibrationsupto15.0mm)

• Easy to recognize by dual marking systems.(Grooveandlasermarking)

StopperDrill

➲ Surgical Kit Components

2.0

1510

L

D

AnyRidge ® Surgical Kit » I. Surgical KitAnyRidge ® Surgical Kit » I. Surgical Kit

– 349348

7(7.5)

8.5(9)

10(10.5)

11.5(12)

13(13.5)

Ø5.0 (In.Ø4.0) SPTB4050

Diameter Ref.C

5.0

D

Ø3.5 TANCDL3500

Ø4.0~ Ø5.5 TANCDL4055

Ø6.0~ Ø8.0 TANCDL6080

Diameter Ref.C

Diameter 1Diameter 2

Ø3.5 (in Ø2.5)

Short(32mm)

TANTBL2535

Ø5.0 (in Ø4.0) TANTBL4050

Ø6.0 (in Ø5.0) *TANTBL5060

Ø7.0 (in Ø6.0) *TANTBL6070

Ø3.5 (in Ø2.5)

Long(38mm)

*TANTBE2535

Ø5.0 (in Ø4.0) *TANTBE4050

Ø6.0 (in Ø5.0) *TANTBE5060

Ø7.0 (in Ø6.0) *TANTBE6070

Diameter Type Ref.C

Type


➲ Surgical Kit Components (Continued)

PointTrephineBur

CorticalBoneDrill• Removescorticalboneandenlargesosteotomysocketespeciallyathardbone.

• Similarfunctionwithcountersinkdrillofothersystems.

• Eachdrillhastwostepsofdiameterforconvenience.

TrephineBur• Minimizesthedrillingstepsneeded,especiallyforwiderfixtures.

• Helpfulforcollectingautogenousbone.• Usefulforremovingfailedandfracturedfixtures.• Depthmarkingsare7,8.5,10,11.5,13mm,samedepthsasfixtures.(NoYdimensionsomarkingsareactuallength).

• Markingsonthedrillshaftrepresenttheinside/outsidediameterofTrephineBurs.

(*)Separatesalesitem.3.5,5.0TrephineBurareincludedinSurgicalkit.


5 *Ultra short TANHCU

10 Short TANHCS

15 Long TANHCL

10 Short (MiNi) HCS17

15 Long (MiNi) HCL17

6 *Ultra short TANREU

10 Short TANRES

15 Long TANREL

15 Short(MiNi) RCS17

20 Long (MiNi) RCL17

Length (mm) Type Ref.C


5 *Ultra-short TCMHDU1200

10 Short TCMHDS1200

15 Long TCMHDL1200

20 *Extra-long TCMHDE1200

TypeLength(mm) Ref.C

L

L

L

Ultrashort

Ultrashort

Option

Option

Option

Option

Short

Short

Long

Long

MiNi

MiNi


RatchetConnector• DeliverstorquefortheplacementorremovalofafixturewithaRatchetWrench.

• SecureaRatchetExtensionorTorqueWrenchtoafixturebeforeexertingforce.

• Toomuchtorqueforcecanresultadamagetothehexofafixture.

• Marksontheshaftcanindicatethepositionoffixtureplatform,especiallyforflaplesssurgery.

HandpieceConnector• Deliverstorquefortheplacementofafixturewithahandpiece.

• Easyandsecurepick-upanddelivery.• Usedtoplaceanimplantwithoutamount.• Marksontheshaftcanindicatethepositionoffixtureplatform,especiallyinflaplesssurgery.

Hand Driver (1.2Hex)• UsedforallCoverScrews,allAbutmentScrews

and all Healing Abutments.• Availablein4lengthsforconvenience.• HandDrivercanbedirectlyinsertedintotheTorqueWrenchwithoutusinganadapter.

• Hextipcanwithstand35-45Ncmoftorquewithoutdistortion.

(*)Separatesalesitem.



AnyRidge ® Surgical Kit » I. Surgical KitAnyRidge ® Surgical Kit » I. Surgical Kit

– 351350

17.5 TANMRD18

25.0 *TANMRD25

Length (mm) Ref.C

MDE150

Ref.C

Ø2.0 / Ø2.8 MDI100

Ø3.2 / Ø4.7 MDI3348

Length (mm) Ref.C

10 TANPFF3580

Length (mm) Ref.C

Torque Wrench MTW300AT

*Torque Wrench Adapter(Handpiece) TTAI100

Torque Wrench Adapter(Ratchet) TTAR100

Type Ref.C

Handpiece Ratchet


➲ Surgical Kit Components

AbutmentRemovalDriver• Usedtoremovefinalabutment;useafterremovingAbutmentScrew.

• Insertstraightintotheabutmentandrotateclockwise.• LongAbutmentRemovalDriverisfordisconnectinganabutmentwithacementedcrown.

DrillExtension• Extendsdrills&otherhandpiecetools.• No more than 35Ncm torque : Can be distorted

when too much force is applied.

Direction Indicator• Confirmsdrillingdirectionandlocationduringdrilling.• Checksdrillingposition.

PathFinder• Afterplacingafixture,aPathFindercanbeconnectedtoguideparallelforthenextimplant.• Gingivaldepthcanbemeasuredwiththegroovesespeciallyforflaplesssurgeries.

TorqueWrench&Adapter• TorqueWrenchhastorqueoptionsfrom15Ncmto45NcmandisusedfortheplacementofanimplantandfinaltighteningoftheAbutmentScrew.



L

TorqueWrench

TorqueWrenchAdapter

8 8

Ø2.8 Ø4.7

Ø2.0 Ø3.2

8 8

2 2

L

AnyRidge ® Surgical Kit » I. Surgical Kit


Ratchet

OPTION Ø4 Ø5 Ø6 Ø7GUIDE PIN

Bone Profiler Kit

Hand Driver

AbutmentRemoval Driver

AnyRidge Solid Driver

Ball Driver

Transfer ImpressionCoping Driver

Octa Driver

AnyRidge Kit » Ⅲ. Prosthetics Kit

Ⅲ. AnyRidge Prosthetic KitA kit with all kinds of driver that are needed for prosthetics.

KANPK3000

Ref.C

RefertoPage.350

RefertoPage.349

RefertoPage.350

AnyRidge ® Surgical Kit » II. Prsthetics Kit

– 353352

*Handpiece Connector(Short) TBH250S

*Handpiece Connector(Long) TBH250L

*Ratchet Connector(Short) TBR250S

*Ratchet Connector(Long) TBR250L

Toque Driver(Short) TBT250S

*Toque Driver(Long) TBT250L

Type Ref.cHandpieceConnector

RachetConnector TorqueDriver

For Two piece impression Coping TCMID

For One piece impression Coping TCMIDE

Type Ref.C

Ø48.5 TANSDS400

13.5 *TANSDL400

Ø58.5 TANSDS500

13.5 *TANSDL500

Ø68.5 TANSDS600

13.5 *TANSDL600

Ø78.5 TANSDS700

13.5 *TANSDL700

Solid AbutmentProfile Diameter Length(mm) Ref.C

7 MOD300S

13 MOD300L

Length (mm) Ref.C

L

AnyRidge Kit » Ⅲ. Prosthetics Kit

➲ Prosthetic Kit Components

BallDriver• ForseatingoftheBallAbutmentintothefixture.• CanconnecttoaHandpiece,RatchetorTorqueWrench.• Availableinlongandshort.

ImpressionCopingDriver

• FortransfertypeofImpressionCoping.• Workswithfrictiononly.• Smallbutpowerfulgrip.

(Transfer)

Solid Driver• ForthedeliveryofSolidAbutments.• Colorcodedfordifferentprofilediameters.(Ø4-magenta,Ø5-blue,Ø6-yellow,Ø7-green)• Twodifferentheights.(8.5/13.5mm)• DirectlyconnectabletoTorqueWrench.

Octa Driver• ForseatingoftheOctaAbutmentintothefixture.• CanalsobeconnectedtoTorqueWrench.


1.ConnectImpressionCopingandImpressionDrivertogether2.AdjustConnectionwithaFixturebyturningaHolderclockwise.3.PushtheHolderandputtheImpressionCopingintotheFixture.4.TurntheDriverclockwisetoensureconnectionoftheImpressionCopingandFixture.

1 2 3 4


Option Option Option

L

AnyRidge ® Surgical Kit » I I. Prsthetics Kit

Regeneration – 551550

Handpiece Connector

option

Chisel Tip Chisel Handle

(TCMSC403)

(TANHCU) (TANHCS)

RatchetConnector(TANRES)

Ratchet Connector (TANREL)

Lance Drill (MGD100L)

BonEx Kit - - - KBECS3000

BonEx Kit component

Ø2.4

13 7 / 8.5 / 10 / 11.5

TCMBE2413

Ø2.8 TCMBE2813

Ø3.3 TCMBE3313

Ø3.8 TCMBE3813

Ø4.3 TCMBE4313

Ø4.8 TCMBE4813

Expander

Ⅱ. BonEx Kit™

Narrow Ridge » Ⅱ. BonEx Kit

Useful in very narrow bone (<2mm)Use Lance Drill before Expanders to avoid bone breakage during drilling.Can be tapped until the end with a Mallet.

Step-by-step ridge Expander can be placed with a Handpiece & a Ratchet Extension, matching with the core shape of the AnyRidge Fixture .

: Best combination with SmarThor™: Perfect for the exceptionally difficult cases

Description Diameter Length (mm)

Marking line(mm)

Ref.C

Product coordinator : Eui Jin Han, [email protected]

AnyRidge ® Surgical Kit » III. BonEx Kit

III.


OPTION Ø4 Ø5 Ø6 Ø7GUIDE PIN

Bone Profiler Kit

3

OPTION

OPTION

BoneProfiler-GuidePin(TANPGF3305)included.

• Eachboneprofilercanbepurchasedseparatelyforrefill.

• Eachpakageincludesaboneprofilerandaguidepin.

Ø413

TANBPL40G

Ø5 TANBPL50G

Ø68

TANBPS60G

Ø7 TANBPS70G

Profile Diameter Length (mm) Ref.C Boneprofiler

Guidepin

AnyRidge Kit » Ⅳ. Bone Profiler Kit

Ⅳ. AnyRidge Bone Profiler KitRemoves the overhanged bone around a fixture to allow adequate seating of a Healing Abutment or a Prosthetic Abutment.•PlaceaGuidePinintoafixtureandchooseaBoneProfilerwhichfitswiththe

situation.•Fourdifferentsizesofboneprofilerandfourguidepinsareincludedinthekit.

KARBP3000

Ref.C

AnyRidge®

Rev.00

L

AnyRidge ® Surgical Kit » IV. Bone Profiler Kit

– 355354

4 Ultra-short

Hex 1.2

MDR120SS

10 Short MDR120S

15 Long MDR120L

20 Extra Long MDR120EL

- not included in the surgical kit- can be purchased separately and placed into the ‘option’ spaces provided in the surgical kit

Ⅴ. Optional components

AnyRidge Kit » Ⅴ. Optional components

RightAngleDriverTip• UsedforallCoverScrews,allabutmentscrews

and all Healing Abutments.• Hextipcanwithstand35-45Ncmoftorquewithoutdistorting.

Lindermann Drill• Crosscutonthedrill.• Cancorrectthepathduringdrilling. 2 TEEL200M

TypeLength(mm)

Diameter(mm)

Ref.C

Ref.C

L

Insert Driver• UsedforallCoverScrews,allabutmentscrewsandallHealingAbutments.

• Hextipcanwithstand35-45Ncmoftorquewithoutdistorting.

HandTap• Usefulwhentheinternalscrewofafixtureis

damaged.• Retappingdamagedthreads.• Needtobepatientandforce-controlled.

10 ShortHex 1.2

MID120S

15 Long MID120L

M1.8 THT180L

TypeLength(mm)

Type

Ref.C

Ref.C

L

Multi-unitDriver(2.0Hex)(ForMulti-unitAbutment)• Fortheseating&tighteningofmulti-unitAbutment(Straighttype)

10 Short TCMMUDS20

15 Long TCMMUDL20

Length(mm) Type Ref.C

L

2

Ø5.0 / Ø2.03.5

FD5020

Ø6.0 / Ø2.0 FD6020


FlatteningDrill• Inthecaseofirregularbone,stopperdrillcanbedrilledinprecisedepthbyflatteningthebone.

• FlatteningLanceandHousingareconnectedtogether.TwotypesofHousingdiameters(Ø5.0&Ø6.0)arecomposedinaccordancewiththesizeoffinaldrilldiameter.

• Ø5.0=StopperDrillØ2.0~Ø4.3 Ø6.0=StopperDrillØ4.8~Ø5.4

• Formationofboundarythroughhousingwillguidethenextdrillinglocationoffixture. Ø5.0Ø2.0 Ø6.0

FlatteningLance

FlatteningHousing

FlatteningDrill

AnyRidge ® Surgical Kit » V. Optional components

AnyRidge ® Surgical Kit » V. Optional components


ReamerDrill&CenterPin• RemovesinnerlipofthecastaftercastingBurn-outCylindersofSolidAbutment.• CenterPinhave4differentdiametersaccordingtotheprofilediameterofSolidAbutments.

Ø10.0 Reamer Drill TANRD

Ø4.0

Center Pin

TANRDJ40

Ø5.0 TANRDJ50

Ø6.0 TANRDJ60

Ø7.0 TANRDJ70

Diameter Type Ref.C

TrephineBurStopper• ControlsthedepthoftrephinationwithaStopperplacedintotheTrephine.

• Especiallyusefulincaseswithlimitedavailabebonefromimportantanatomy.

Manual Inserter• SpeciallydesignedformanualplacementofAnyRidgefixture.• Especiallyusefulatimmediateimplantplacementonmaxillaryanterior.

• Thetiphassamestructurewiththehand-piececonnector.

7.0 TANTSF2307

8.5 TANTSF2308

10.0 TANTSF2310

11.5 TANTSF2311

Length (mm) Ref.C

TANMI

Ref.C

TrephineBurStopper

Connection

L 7 8.5 10

AnyRidge Kit » Ⅴ. Optional components

Type

BottomDrill• It removes remaining bone in osteotomy socket aftertrephinedrilling.• Itimprintsthesizesoffixtures,forexample7,8.5,10,11.5and13mm,bylasermarker.

Ø3.3

Short(32mm)

TCMBDS33

Ø3.8 TCMBDS38

Ø4.8 TCMBDS48

Ø5.8 TCMBDS58

Ø6.8 TCMBDS68

Ø3.3

Long(38mm)

TCMBDL33

Ø3.8 TCMBDL38

Ø4.8 TCMBDL48

Ø5.8 TCMBDL58

Ø6.8 TCMBDL68

Diameter Type Ref.C

D

7(7.5)

8.5(9)

10(10.5)

11.5(12)

13(13.5)

RatchetWrench• Usedtoexertmoreforcethanhandpiece.• Nobearingsystem:Nobreakageandcorrosionproblems.

• AttachestoRatchetExtension.• Arrowlasermarkingindicatesdirectionofforce.

MRW040S

Ref.C

Regeneration – 559558

Ⅰ. i-Gen

Augmentation » Ⅰ. i-Gen

4 9 11 4.5 - - A1 IG1W45094 10 11 5.5 - - A2 IG1W55104 11 11 6.5 - - A3 IG1W65115 9 11 4.5 - - B1 IG2W0918

6.5 11 11 5.5 - - B2 IG2W11209 13 11 6.5 - - B3 IG2W13235 9 11 4.5 6 4.25 C1 IG3W0921

6.5 11 11 5.5 8 4.25 C2 IG3W11259 13 11 6.5 10 9 C3 IG3W13288 11 11 5.5 9.6 9.25 D1 IG4W1128

i-Gen Membrane Dimension

PL(Proximal Length)

BW(Buccal width)

BL(Buccal Length)

BD(Buccal

Distance)

LW(Lingual width)

LL(Lingual Length)

A1

Small Regular Wide

B1

C1

A2

B2

C2

A3

B3

C3

Augmentation

Ref.CType

BW LW

BL

BDLL

PL

Product coordinator : Jung Ho Nam, [email protected]

Extra Option Products » I. i-Gen

– 561560

Augmentation » Ⅰ. i-Gen

➲ i-Gen Components

M 2.0• MegaGen (AnyOne, EZ Plus(R&W) & MegaFix)• Straumann (Standard & Standard Plus)• Nobel Biocare (Nobel Replace Tapered Groovy)• Dentium (Superline)• Dio (Steady, SM, IFI)• Neobiotech (IS)• Osstem (TS IV)

M 1.8• MegaGen (AnyRidge)• Dentsply-Frident (Ankylos C/X Implant)• Zimmer (TSV)

M 1.6• MegaGen (AnyRidge Octa 1, EZ Plus Internal _Small)• Straumann (Bone Level)• 3i (Osseotite certain & Full Osseotite NT Certain)

M 1.4• MegaGen (MiNi)

i-Gen Screw* We recommend that you verify the size of the abutment screws before use, it should be noted that it may not be fully compatible depending on the tolerance of each manufacturer.

C.H

C.H

C.H

C.H

Hex 1.2 1.0 ICS3510

i-Gen Cover Screw- Use Hand Driver(1.2 Hex)

• Used for primary closure after i-Gen(on top of i-Gen screw).

Type Height (mm) Ref.C

Flat Healing Abutment• Used for one stage approach after i-Gen

(on top of i-Gen screw).2 FHA402

3 FHA403

4 FHA404

Height(mm) Ref.C

H

Hand Driver (1.6 Hex)• This driver is designed to deliver i-Gen screw into

a fixture. Just finger force is enough to tighten the i-Gen screw.

10 Short TCMHDS1600

L

Length(mm) Type Ref.C

M1.8

1.0 IA1810

2.0 IA1820

3.0 IA1830

4.0 IA1840

5.0 IA1850

M2.0

1.0 IA2010

2.0 IA2020

3.0 IA2030

4.0 IA2040

5.0 IA2050

Type Cuff Height(mm) Ref.C

M1.6

1.0 IA1610

2.0 IA1620

3.0 IA1630

4.0 IA1640

5.0 IA1650

M1.4

1.5 IA1415

2.0 IA1420

3.0 IA1430

4.0 IA1440

5.0 IA1450

1.0

3.5

Extra Option Products » I. i-Gen

Instrument & Material – 589588 Instrument & Material – 589

Low stability Medium stability High stability

Full splint IL2-stage

Traditional

Implant at riskmonitor ISQ

Partial1-or 2-stage

Early

Single1-stage

Immediate

IndicationSurgical protocol

Restorative protocol

Implantplacement

Post sutureremoval

ProstheticsComplete

S-L-A RBM

1 2 3

Have you made the PARADIGM SHIFT yet?

Do it the AnyRidge Way

When is the right time to load?

AnyRidge is Perfect for Early(Immediate) loading with Mega-ISQComplete Prosthetic Process in Only 4 WeeksWith Con�dence! Objective Evidence with ISQ Values

Excellent Primary Stability with Knife thread

Excellent Secondary Stability with Xpeed

For smooth insertion and stronger primary stability.No cutting edge for minimum invasion. Perfect result in any bone condition.

For faster, stronger osseointegration. Surface technology incorporating Ca2+ ions on the SLA treated surface.100% acid-residue free surface

- Stable dispersion of stress with Buttress Thread shape- Easier Insertion with Sharp Thread shape- Increase the surface area of the round side compared with the straight side.

XPEED Surface Treatment presents much faster & stronger Osseointegration than RBM or S-L-A

Test result after 4Ws with rabbit

Using Mega-ISQ enable accurate and objective assessment of implant stability which, in conjunction makes leading to predictable outcomes.

Experience stable or increasing ISQ values continuously when using AnyRidge implants.

the AnyRidge Way

II. Mega-ISQ

Extra Option Products » II. mega-ISQ

– 599598

Ⅱ. Wireless Auto Torque Driver MEG-TORQ®

Instrument » Ⅱ. MEG-TORQ

MEG-TORQ2 Right Angle Driver included.

[1 Long Type, 1 Short Type(1.2 Hex)]MEG-TORQ

Right Angle Driver

Slot 0.5Short MDR050SLong MDR050L

Hex 0.9Ultra-Short MDR090SS

Short MDR090SLong MDR090L

Hex 1.2

Ultra-Short MDR120SSShort MDR120SLong MDR120L

Extra-Long MDR120EL

Hex 1.25Short MDR125SLong MDR125L

Hex 1.6Short MDR160SLong MDR160L

Hex 3.0 Ultra-Short RDI30U

Description Ref.C

Operating button (A)

Operating button (B)

On/Off , Torque selection

Clockwise / Counterclockwise

RPM selection

LCD Panel RPM

Rotation information

Battery Condition

Calibration mode

Torque information60

rpm

➲ Use as Second Implant Motor at soft bone cases (Max torque 35Ncm)

➲ Quick removal of numerous prosthetic appliances➲ Easy to reach to molar areas➲ Approach the implants placed in distal areas➲ Record the number of abutment screw torquing accurately

Accurate Torque Value, Strong Power!

Product coordinator : Jerry Park, [email protected]

Combined world’s first class FAULHABER motor from Germany and Swiss-made reduction gear.

I

Extra Option Products » III. Meg-Torq

– 395394

4

M1.4Magenta

M1.6Blue

M1.8Yellow

M2.0Red

M2.5Green

6 8 0 5

Hex

4

M1.4Magenta

M1.6Blue

M1.8Yellow

M2.0Red

M2.5Green

6 8 0 5

➲ 911 Fixture Removalkit

The total solution kit to remove broken pieces easily when fixture, abutment or screw are fractured. KPSCS3000

KPSFS3000

Ref.C

Ref.C

911 kit

911 Kit

This is a simplified version of 911 kit, only to use for fixture removal.

Product coordinator : jung hee Lee, [email protected]

IV. 911 Kit

Extra Option Products » IV. 911 Kit


FixtureRemover• Toremovethefixture.WhenselectingaFixtureRe-mover,considertheouterdiameterofaFixture.IncaseofAnyRidgeFixturethatthethreadisformedunderplatform,selectaFixtureRemoveraccordingtoplatformsize

TorxDriver• Toconnectfixtureremovalscrewtoafixture.

TorqueWrench• TW500:Tochecktorqueforcewhenremovingfixture.

• TW70:TochecktorqueforcewhentighteningFixtureRemoverScrew.

FixtureRemoverScrew• ToconnectfixtureandFixtureRemover.• Recommendedtighteningtorque -FSS14,FSS16:40~50Ncm -FSS18,FSS20,FSS25:70~80Ncm.

Ø3.0~Ø3.615 *FSS3035

20 *FSL3035

Ø3.7~Ø4.615 FSS3540

20 FSL3540

Ø4.7~Ø5.615 FSS4555

20 FSL4555

Ø5.7~Ø7.015 *FSS6080

20 *FSL6080

Applied Fixture Diameter Length(mm) Ref.C

5 TD05

15 TD15

20 *TD20

300Ncm TW500

70Ncm *TW70

Length (mm) Ref.C

Type Ref.C

L

L

➲ 911 kit Components (Continued)

911 Kit





4 6 8 0 5M1.4 (MiNi) Magenta

40~50 Ncm

*FSS14

M1.6 (EZ Plus, ExFeel Ø3.3,Octa 1) Blue FSS16

M1.8 (AnyRidge) Yellow

70~80 Ncm

FSS18

M2.0(AnyOne, MegaFix, EZ Plus, ExFeel)

Red FSS20

M2.5 (Rescue) Green *FSS25

Applied Fixture Thread

Ref.CTorqueColor


– 397396

AbutmentRemover• Toremovefracturedabutment.• UsescrewsizeM1.8&M2.0.

ScrewRemover• Toremovefracturedscrew.• Screwsizeofsystem M1.4=MiNi�

M1.6=EZ�Plus,�Exfeel�Ø3.3

M1.8=AnyRidge�

M2.0=AnyOne

ScrewRemoverGuide• TosecuretheScrewRemoverfrommovingsidetosidewhenremovingthescrew.

22 ASS

27 ASL

30M1.4 & M1.6

*SS1416S

45 *SS1416L

30M1.8 & M2.0

SSS

45 SSL

Length (mm) Ref.C

ScrewRemoverGuideHolder• TooltosupporttheScrewRemoverGuide.

SSGH

Ref.C

HexRemover• Toremovehex-damagedAbutmentScrew,CoverScreworHealingAbutment.

22 HSS

27 HSL

Length (mm) Ref.C

L

L

L

911 Kit

➲ 911kit Components




Internal

10∘(AnyRidge) SSIG10

16∘(AnyOne OneStage) SSIG16

22∘(AnyOne Internal / MiNi Internal) *SSIG22S

22∘(AnyOne Internal / MiNi Internal) SSIG22

22∘(AnyOne Internal / MiNi Internal) *SSIG22W

External

HEX 2.4(AnyOne External Ø3.5) SSEG24

Hex 2.7(AnyOne External) SSEG27

Hex 3.3(Rescue External) SSEG33

Applied Fixture Diameter Type Ref.C



911 Kit

GrindingandRemovalBurwithaImplantmotor ARARHB18

ARARS

Ref.C

Ref.C

➲ Broken Abutment Remover Set for AnyRidge

Components HighSpeedBur+AbutmentRemoverDriver+AbutmentRemoverHousing

How togrindremainingfracturedabutmentusingahigh-speedbur,andremovetheresidueusingahousing-connecteddriver

Recommendations 1.Ifanabutmenthexisnotseparatedeventhoughtheabutmentisremoveduptothestopper, remove theabutmenthexwithpincette.2.Checkthebladebeforeusage.Itishighlyrecommendedtouseanewburifitiswornout.3.Washandsterilizeimmediatelyaftereveryusage

※Cautions 1. Perpendicularly insert a high-speed bur into a fixture 2. Do not overload when using a high-speed bur. Adequate irrigation is highly recommend when using. 3. The given kit case is for storage only. Do not sterilize. 4. Anti-clockwise when in use.

: Remover set to remove fractured AnyRidge Abutment


Fig 1. This 52 year-old male patient lost his maxillary left first molar due to periodontitis during implant treatment for other teeth. The panoramic radiograph was taken about one month after extraction, and a large extraction socket defect was expected. On the clinical examination, the inter-arch space for future crowns was very limiteddue to large tuberosity, so it was planned to remove bone and soft tissue from this sites (red line on panoramic view). The remaining vertical height was about 7~8 mm under the sinus floor.

Fig 2. Two parallel incision lines were made on the crest expecting the soft tissue amount after reducing the crestaldimension. There was no buccal plate remain-ing on the extraction socket of the first molar area.

Fig 3. During the procedure to make an ideal shape of alveolar ridge, all thecortical bone was removed from the crest.

Fig 4. Now the ridge has normal shape and inter-arch distance was recovered enough to make ideal contour of crowns. However, the bone density was extremely soft with-out any cortical bone. It was much less than Type IV bone density. At the case of like this, how long do we have to wait after implant placement to start the prosthetic procedures? Normally we wait for at least 6 months for Type IV bone with conventional implant system because we cannot get enough initial stability due to less bone density. However if we can make excellent initial stability with mandibular implants by changing implant design, we may start prosthetic procedures after 3 months or less. That is one of important design con-cepts on AnyRidge implant system.

Fig 1

Fig 3

Fig 2

Clinical Case 1 - Courtesy of Dr. Kwang-Bum Park

AnyRidge Clinical Case

AnyRidge implant can make excellent initial stability even at this extremely loose bone.

Clinical Cases

Clinical Cases

Fig 5. Two osteotomy sockets were pre-pared with a single trial of drilling using a trephine (4050 which has 5.0mm outer diameter). Bone density was extremelysoft as expected, and there was enough ridge width both to buccal and lingual side. If we place fixtures with conventional thread design, satisfactory initial stability is really difficult to achieve due to loose bone density. AnyRidge implant was designed to have same core diameter, but different thread depth with increase of fixture diam-eter. So in the case like this,we needed to consider the bone density ur-ing socket preparation to choose adequate depth of thread which could affect initial stability.

Fig 6. Two 7.0(W)x8.5(L)mm AnyRidge fixtures were placed with excellent initial stability because of deep and knife threads. Compared with the size of osteotomy sockets, the fixtures were 2mm bigger in di-ameter, but the core diameter of these wide fixtures are only 4.8mm. The whole depth of thread could be used to engage bone to get more BIC and better initial stability.

Fig 7. The bone defect was grafted with au-togenous bone which was harvested during reshaping of alveolar ridge and trephina-tion. And primary closure was made to make sure bone regeneration.Fig 8. The panoramic view after surgery.

Fig 9. Three months after implant place-ment, the second stage surgery was made and provisional restoration was delivered two weeks later. The final restoration was delivered about one monthlater for the maturation of regenerated bone. On the radiograph taken 2.5 years later, the crestal bone regenerated up to the level of platform.

Fig 4

Fig 5 Fig 6

Fig 8

Fig 9

Fig 7

Clinical Cases

Fig 1. This patient was 56 years old male patient and had a chief complaint of chewing difficulty on the left first mandibular molar due to periodontitis. On the panoramic radiograph, the tooth was floated with complete bone loss to the apex, and there was not enough bone to get initial stability for implant placement at the apex above mandibular nerve. So I decided to extract the tooth and wait for 4 months for regeneration of the socket.

Fig 2. The patient came back to my office af-ter 4 months. Healing appeared good enough clinically, but the panoramic view still showed large socket defect. In many cases like this, we can expect some amount of bone fill in the socket which can allow minimal initial stability for implant placement.

Fig 3. When the flap was opened, I was very embarrassed that bone regeneration did not occur in the socket. None of remaining bone could be used for implant fixation.

Fig 4. A widest AnyRidge implant 8.0mm was placed on the mesial wall of extraction socket, but there was no initial stability. This trial was quite heroic treatment, but there was no other option except this be-cause he flied many hours for this surgery.

Fig 5. The mixture of Allograft (Mega-Oss) and Synthetic bone (Bone Plus) was placed into the remaining socket defect and a collagen membrane was covered. Then primary closure was made with releasing incision on the periosteum.

Clinical Case 2 - Courtesy of Dr. Kwang-Bum Park

Fig 1

Fig 2

Fig 3

Fig 4

Fig 5

AnyRidge implant has excellent surface treatment which can be osseointegrated at this extreme case of bone defect.

Clinical Cases

Fig 6. On the panoramic view after surgery, we could find that none of the fixture was engaged with remaining bone, so it had more than 1.6mm gap from the tip to the depth of knife threads. I worried about the bone filling and success of the osseointe-gration on this fixture.

Fig 7. However, I was surprised with the hard cortical bone regeneration over the cover screw when I did the second stage surgery with the Biolaser.

Fig 8. On the intraoral radiograph taken several weeks after second surgery, we could see the fully regenerated bone into the bottom of thread depth.

Fig 9. The patient came back to our office to get one more implant on the maxillary upper molar after 2 years from the first implant surgery. The regenerated bone was matured and showed very stable crestal bone on the intraoral radiograph.

Fig 6

Fig 7

Fig 8

Fig 9

MegaGen History

201201.02 Present a new slogan for coming decade. "To be One, To the world, To the Future".01.17 MegaGen implant’s AnyRidge system was awarded 2012 Jang Young Sil prize12.25 MEGAGEN TOWER opened

201012.14 President Park, Kwang Bum was awarded grand prize for “2010 Intellectual property management”

200805.29 Won the reward prize of the man of merit on the First Day of Medical Appliances (Minister's Prize of the Ministry for Health and Welfare)10.22 Awarded the Prime Minister's citation at "The Best Venture Enterprise 2008"12.02 Awarded "a five million dollar export tower prize" on the Forty Fifth Day of Trade

200201.03 Established MegaGen Co., Ltd. (CEO Kwang-Bum Park)

200603.08 CE Certification for the ExFeel Implant System/Intermezzo Implant System06.09 Selected as the Inno-Biz (No. 6535-0617)09.11 Licensed to establish an organ bank (Korea Food & Drug Administration: No. 88)

200407.14 Government Industry Auxiliary Research Institute certified (ID No.20041761/ MegaGen Corp)09.09 ISO9001/2000 (NO.12 100 23436 TMS)

201404.01 MEG-Inject, Red Dot award 2014 Winner09.28 MegaGen Meg-Series won Convergence Federation Prime Minister’s Award for small and medium-sized business

200309.01 Performed a project related to TBI business (Ministry of Commerce, Industry and Energy)

201103.16 [Award] Recived a Ministry of Knowledge & Economics award on "2011 Chamber's day"05.19 [Award] Received a Prime Ministry Award on The 46th INVENTION DAY of Korea.12.21 MegaGen implant was awarded U$10 million export tower on the Trade Day

200702.22 KGMP04.11 SFDA in China Certification for the EZ Plus Implant

System & the Rescue Implant System

200509.02 U.S. FDA approval for the Intermezzo Implant System NO.K05101812.21 Certification of ISO9001/13485 DNV (NO.2005-OSL-AQ-0376)

201303.18 AnyRidge got approval from Russia

201703.27 Selected as Global IP Star Company (Regional Intellectual Property Center)05.31 Selected as Excellent Venture Company (Venture Business Association)10.14 Certified TRUST QUALITY (CLEAN IMPLANT FOUNDATION)12.13 Awarded a grand prize for Export Innovation Enterprise (Korea Trande-Investment Promotion Agency, "KOTRA")12.14 Awarded the prize of $50 million Export Tower (Korea International Trade Association)

200906.30 Appointed as a leading company for future Bio-technology dental implant development from Korean government09.02 Prime Minister of Korea Award of “Innovate Technology 2009”

201604.01 Nominated as KISTI family company from Korea Institute of Science

and Technology Information04.27 Nominated as Youth friendly Smallgiants from Ministry of Employment

and Labor06.30 Nominated as the top leading venture company (global & continuous

growth) from Korean Venture Business Association09.28 Awarded as an outperforming company in Global Standard Policy Forum09.29 National Productivity Competition Prime Minister Awarder10.19 Ranked as one of the most valuable companies from Asian Science

Park Association12.05 Receive 30 million dollars export award

201801.01 Selected as 'Young man friendly leading company' (Ministry of Employment and Labor)05.23 Certified as 'Technology Innovation Company' by INNOBIZ06.24 Selected as the Best Company in Job creation07.01 Selected as Excellent Venture Company (Job creation, Global, R&D)07.10 Selected as Employment-friendly Company11.21 Selected as Daegu Star company 100 (Daegu)12.13 Awarded a Citation (Korea Technology Finance Corporation) by INNOBIZ12.19 Awarded an appreciation plaque for exports meritorious company

(Dalseoung district)

201503.18 Received a commendation from Korea International Trade Association (42nd Commerce Day)06.26 Venture company certification (Korea Technology Finance Corporation)07.01 Selected as World Class 300 Company (Small and Medium Business Administration) Selected as Global Company (Ministry of Trade, Industry and Energy)11.27 Received a Creative Economic Award (2nd Daegu, Gyeong-buk, Creative Economic Award Competition) Gyeong-buk office12.07 Received 20 million dollars export award 12.16 Received a Minister award from Ministry of Trade, Industry and

Energy (15th Daegu, Gyeong-buk, high-technology venture company)12.17 Awarded from a chairman of Korea technology finance corporation

(Inno Business Association)12.22 Ranked as one of the most valuable companies for inventing Jobs

from Korean Intellectual Property Office

www.megagen.com.au

08 8331 [email protected]

www.megagen.com.au1-233 Greenhill Rd. DULWICH SA 5065

what is the anyridge way? · • esthetic design & varied abutment selection • super...

Documents