Wheel Impact Load Detector (WILD)

RailMan & WILD

is a Wayside Safety System used to identify the Rolling Stock with high impacts by measuring the dynamic load on the track, at a very early stage and thereby protect the Rail Infrastructure and avoid derailments and catastrophic failures. WILD also reduces service failures and unplanned maintenance cost of Rolling stocks and Tracks.

Intelligent software algorithms have been developed to identify the Wheel

Impact and Impact Load Factor along with other parameters like time & speed of the train, axle number, average dynamic wheel load and maximum wheel load. The sensors on the track senses the dynamic impact load caused by the wheels, the high speed data acquisition system acquires the data and the embedded controller does the signal processing & analysis to identify the impact load data. The same is transferred to a remote centralized server ( )

through GPRS and Optical Fiber Communication. http://www.railman.in

RailMan – Railway Asset Management is an online platform for analysis and processing of data generated by different Wayside Systems. It is indigenously developed by ApnaTech and can integrate with any wayside equipment that uses the predefined openXML protocol. All data collected by WILD is decoded into a user understandable format and transferred to RailMan. The users can log on to RailMan and generate reports in different formats. The online platform also details information on Maintenance Alarms & Critical Alarms.

Wheel Impact Load Detector (WILD)

WILD system was initially developed along with RDSO & IIT Kanpur.

Impact load is also transferred to rail head from wheel through combination of any or all of the following defects like

POSSIBLE DEFECTS IN CASE OF CRITICAL ALARM BY WILD

An analysis of the reports and identified axles by RDSOhas indicated that when an

alarm is generated by WILD, one or more of the following may be the cause and is not an exhaustive list.

(Letter dated on 23rd Mar’11)

Apna Technologies & Solutions (ApnaTech) is part of the Apna Group of Companies which was established in 1979. ApnaTech specializes in the development of Knowledge Engineering Products (KEP’s) and providing Systems Engineering solutions for Railways.

Contact Us

CHENNAIE-10, Industrial Estate, Guindy, Chennai-600032Ph: +91-44-22500274 Fax: +91-44-22500269

BANGALORE#01, Coconut Garden Cross, Outer Ring Road, Kalyan Nagar PO, Bangalore-560043 Ph: +91-80-43424000 Fax: +91-80-25426463

NOIDAA-175, Sec 63, Noida -201301 Ph. +91-120-4743200 Fax: +91-120-4743209

LUCKNOW18-F, Samar Vihar, Near Manak Nagar Railway Station,Alambagh, Lucknow-226005 Ph: +91-94444-16847

www.apnatech.com info@apnatech.com

OTHER TRACKSIDE MONITORING SYSTEMS

Ÿ Hot Axle Hot Wheel Detector (HAHW)*

Ÿ Acoustic Bearing Detector (ABD)*

Ÿ Truck Performance Detector (TPD)*

Ÿ Derailment Detector

*ABD & TPD – Technology Transfer from TTCI, Pueblo, USA

*HAHW was developed along with IIT Kanpur and RDSO as a part of Technology Mission for Railway Safety

CU

RR

ENT

INST

ALLA

TIO

NS

OF

WIL

D IN

IND

IA

MK

T_0

2_W

ILD

-SP

_01

Certifications

Alliances

info@apnatech.com

Other Products & Solutions

Ÿ Train Detection System (TDS)Ÿ Bridge Health Monitoring SystemsŸ On Board Data LoggersŸ Passenger Information SystemsŸ Vision Based SystemsŸ Load Box Testing SystemsŸ Track Recording Car

Ÿ Automatic Rail Vehicle Inspection Systems Ÿ Wheel Inspection & Measurement Systems Ÿ Coach Health Monitoring Systems Ÿ Stereo Vision Systems for Surveillance & Tracking Ÿ Fog Vision & Vision Enhancement Systems Ÿ Wireless Sensor Networks Devices & MOTE Ÿ GPS based Tracking Devices

Wheel Impact Load Detector (WILD)

Installed Sites :Arakkonam, Asansol, Bhilai, Hospet, Mahalimarup, Mugalsarai,Visakapatnam

Guntakal,

Ajni, Barwadi, Bina, Damoh, Dongargarh, Itarsi

PHASE - 1

PHASE - 2

+91-94444-16847 or