[when connecting one pc using a global connection ... · [when connecting one pc using a global...
TRANSCRIPT
[When connecting one PC using a Global connection (connecting with UPnP OFF)]*Read the IP Addresses for the LAN environment you are using.
[JKW-IP Network Setting]Illustration) JKW-IP 1-1 Illustration) JKW-IP 1-2
[JKW-IP Connection for PC 1-1]Illustration) PC 1-1
Illustration) PC 1-1 Connecting JKW-IP 1-1 Illustration) PC 1-1 Connecting JKW-IP 1-2
[JKW-IP Connection for PC 2-2]Illustration) PC 2-2
Illustration) PC 2-2 Connecting JKW-IP 1-1 Illustration) PC 2-2 Connecting JKW-IP 1-2
[ROUTER Port Forwarding Setting]Illustration) ROUTER 1 Illustration) ROUTER 2
Type Port Type PortUDP 5060 UDP 50010UDP 65002 UDP 50012TCP 443 UDP 50014UDP 5061 UDP 50020UDP 65004 UDP 50022TCP 444 UDP 65024192.168.0.31
IP address192.168.0.16192.168.0.16192.168.0.16192.168.0.16192.168.0.16192.168.0.16
192.168.0.30192.168.0.31192.168.0.31
IP address192.168.0.30192.168.0.30
IP: 192.168.0.15 IP: 192.168.0.16
IP: 192.168.0.30 IP: 192.168.0.31
LocalIP:
GlobalIP: ①.①.①.①
LocalIP:
GlobalIP: ②.②.②.②
Global IP: ①.①.①.①
Enter the Global IPAddress forROUTER 1. Global IP: ①.①.①.①
Enter the Global IPAddress forROUTER 1.
Enter the Local IPAddress forROUTER 1.
Enter the Local IPAddress forROUTER 1.
It is necessary to set"Connection Port", "AudioPort", "Video Port", and "WebPort" so that they are not thesame as the ports used forJKW-IP 1-2.
It is necessary to set"Connection Port", "AudioPort", "Video Port", and "WebPort" so that they are not thesame as the ports used forJKW-IP 1-1.
Global IP: ①.①.①.①
Enter the Global IPAddress forROUTER 1.
Global IP: ②.②.②.②
Enter the Global IPAddress forROUTER 2.
It is necessary to set"Connection Port", "AudioPort", and "Video Port" sothat they are not the sameas the ports used for theJKW-IP 1-2 registration.
Use with the same settingsas for "Connection Port","Audio Port", and "VideoPort" above.
Global IP: ①.①.①.①
Enter the Global IPAddress forROUTER 1.
Global IP: ②.②.②.②
Enter the Global IPAddress forROUTER 2.
It is necessary to set"Connection Port", "AudioPort", and "Video Port" sothat they are not the sameas the ports used for theJKW-IP 1-1 registration.
Use with the same settingsas for "Connection Port","Audio Port", and "VideoPort" above.
ROUTER 1 portforwarding settingis required.
ROUTER 2 portforwarding settingis required.
Perform setting so that"UDP : 5060, UDP : 65002,TCP : 443" is forwarded toJKW-IP 1-1.
Perform setting so that"UDP : 5061, UDP : 65004,TCP : 444" is forwarded toJKW-IP 1-2.
Perform setting so thateach UDP port is forwardedto PC 2-2.
JKW-IP 1-1
JKW-IP 1-2
JKW-IP 1-1
JKW-IP 1-2
Take care to ensure thatports used within the sameLAN are not duplicated.
Take care to ensure thatports used within the sameLAN are not duplicated.
Enter the IPAddress for JKW-IP 1-1.
Enter inaccordance withthe JKW-IP 1-1network setting.
Enter the IPAddress for JKW-IP 1-2.
Enter inaccordance withthe JKW-IP 1-2network setting.
Enter inaccordance withthe JKW-IP 1-1network setting.
Enter inaccordance withthe JKW-IP 1-2network setting.
Copyright(C) AIPHONE CO.,LTD. All rights reserved.