where do minerals come from? pg 16 minerals from magma magma comes from the mantle and cools. when...

Where do Minerals Come From? pg 16 Minerals from Magma Magma comes from the mantle and cools. When it cools, it forms into minerals If it cools slowly, it forms large crystals. If it cools fast, it forms small crystals.

Minerals from Solutions Minerals can dissolve into a solution. When enough minerals are in the solution, they stick together and precipitate. They form a solid while still in the solution. Minerals can also crystalize when the solution evaporates (called evaporates)

Mineral Definition.Slide 4 Hardness..9 Cleavage....13 Fracture.....20 Streak22 Luster....24 Color.29 Specific Gravity...32 Taste.41 Magnetism42 Diaphaneity..46 Double Refraction50 Reaction to HCl (acid)..51 Crystals.52 Isometric...54 Hexagonal.58 Tetragonal.62 Orthorhombic...66 Monoclinic...71 Triclinic74 Resources.77 TABLE OF CONTENTS

Introduction to Mineral Identification Basics Welcome to the fascinating world of Minerals. The purpose of this CD is to present you with some of the basic techniques used to identify minerals. This Power Point Presentation can also be viewed in the edit mode. Here you can view the many notes associated with the slides.

Mineral Identification Basics What is a Mineral? There is a classic four part definition for mineral. Minerals must be: Naturally occurring Inorganic Possess a definite crystalline structure Have a definite chemical composition Cubic Fluorite Crystal

Mineral Identification Basics What is a Mineral? Minerals are not synthetic - they are produced by the natural geological processes working on Earth. For example, steel, brass, bronze and aluminum are not considered minerals in that they are not found in nature. Technically speaking, synthetic gemstones are not considered minerals. This area of mineralogy has a hazy boundary in that synthetic stones are in every way the same as the natural stones. But because they are produced in laboratories, they do not meet the classic definition of a mineral. Also note that many synthetic gemstones are doped with a fluorescent dye to distinguish them from natural stone. Tourmaline Crystal from Brazil Naturally Occurring

Mineral Identification Basics What is a Mineral? Minerals are NOT produced by organic processes. As a result things like pearls, coral, coal and amber are not considered minerals. Also included in this NOT a Mineral List are teeth, bones, sea shells and even kidney stones. Barite Rose - A flower like growth of Barite crystals. Inorganic

Mineral Identification Basics What is a Mineral? Minerals are the result of atoms joining together through electrical bonds to produce a definite internal structure. Crystalline Pattern of Halite Red = Sodium Green = Chlorine Internal Structure Halite (salt) from Searles Lake, CA It is the nature of the atoms and the strength of the chemical bonds that determine many of the minerals physical and chemical properties.

Mineral Identification Basics What is a Mineral? Minerals can be expressed by a chemical formula. The internal order of minerals means that there is a definite relationship in the number of atoms that makes up the mineral. Halite - NaCl For every atom of Sodium there is an atom of Chlorine. Definite Chemical Composition

Mineral Identification Basics PHYSICAL PROPERTIES HARDNESS HARDNESS is defined as the resistance a mineral has to being scratched - its scratchability. Hardness tests are done by scratching one mineral against another. The mineral that is scratched is softer than the other. Pyrite Crystals Hardness of 6.5

Mineral Identification Basics PHYSICAL PROPERTIES HARDNESS In this photo, a quartz crystal has been rubbed across a glass plate. The result is that the glass plate was scratched. The quartz is therefore harder than the glass. Quartz is harder than glass. HINT: In doing a hardness test try to pick a smooth or flat surface on the mineral to be scratched. Try to pick a point or a sharp edge on the mineral that you think will do the scratching. Glass is usually a good place to start because it is in the middle of the hardness table, it has a flat, smooth surface and it is easily obtained.

Mineral Identification Basics PHYSICAL PROPERTIES HARDNESS Care must be taken on some minerals that crumble easily. Remember that hardness is the resistance a mineral has to being scratched - NOT how easily it breaks apart. The physical property related to the ease in which a mineral breaks is tenacity. Also be sure to determine the hardness of a mineral on a fresh surface whenever possible. Some minerals have a tendency to oxidize or corrode. These surface deposits usually have a different hardness than the fresh mineral.

Mineral Identification Basics PHYSICAL PROPERTIES HARDNESS MOHS SCALE OF MINERAL HARDNESS 1. TALC 2. GYPSUM 3. CALCITE 4. FLUORITE 5. APATITE 6. FELDSPAR 7. QUARTZ 8. TOPAZ 9. CORUNDUM 10. DIAMOND OTHER MATERIALS COMMONLY USED: 2.5 - FINGERNAIL 3 - COPPER PENNY 5.5 - GLASS 6-6.5 - STEEL FILE

Mineral Identification Basics PHYSICAL PROPERTIES CLEAVAGE CLEAVAGE is the property of a mineral that allows it to break repeatedly along smooth, flat surfaces. These GALENA cleavage fragments were produced when the crystal was hit with a hammer. Note the consistency of the 90 o angles along the edges. These are FLUORITE cleavage fragments.

Mineral Identification Basics PHYSICAL PROPERTIES CLEAVAGE Within this crystalline pattern it is easy to see how atoms will separate to produce cleavage with cubic (90 o ) angles.

Mineral Identification Basics PHYSICAL PROPERTIES CLEAVAGE These pictures show different cleavage angles and the quality of cleavage. Fluorite has cleavage in four directions A thin sheet of Muscovite seen on edge. Mica has perfect cleavage in ONE direction.

Mineral Identification Basics PHYSICAL PROPERTIES CLEAVAGE Common salt (the mineral HALITE) has very good cleavage in 3 directions. These 3 directions of cleavage are mutually perpendicular resulting in cubic cleavage.

Mineral Identification Basics PHYSICAL PROPERTIES CLEAVAGE Rhombohedral Cleavage - 3 directions CALCITE Even these tiny fragments have rhombohedral cleavage.

Mineral Identification Basics PHYSICAL PROPERTIES CLEAVAGE Blocky Cleavage 2 directions Orthoclase Feldspar Orthoclase feldspar has good cleavage in 2 directions. The blocky appearance of this specimen is a hint that it has cleavage. The clue that the specimen has cleavage is the fact that numerous faces will reflect light at the same time. Each face is parallel and light will reflect of each face producing a flash of light. Note that the faces in the circle are at different levels. By adjusting the lighting, all of the parallel faces will reflect simultaneously. This results in a flash of light from all the parallel faces.

Mineral Identification Basics PHYSICAL PROPERTIES CLEAVAGE TALC has micaceous cleavage. That is to say that it cleaves like mica (1 perfect direction) but, in talc the crystals are so small that they cannot easily be seen. Instead the effect is that the talc feels soapy. The second picture shows some of the talc that has cleaved onto the fingers.

Mineral Identification Basics PHYSICAL PROPERTIES CLEAVAGE FLUORITE cleavage octahedron

Mineral Identification Basics PHYSICAL PROPERTIES FRACTURE FRACTURE is defined as the way a mineral breaks other than cleavage. This is a piece of volcanic glass called OBSIDIAN. Even though it is NOT a mineral, it is shown here because it has excellent conchoidal fracture. If you try this yourself, use caution. Conchoidal fracture in obsidian can produce extremely sharp edges.

Mineral Identification Basics PHYSICAL PROPERTIES FRACTURE This Quartz crystal has been struck with a hammer to show how the external form of the crystal does not repeat when broken. This is a good example of conchoidal fracture. Note the smooth curved surfaces.

Mineral Identification Basics PHYSICAL PROPERTIES STREAK STREAK is defined as the color of the mineral in powder form. Hematite on Streak Plate Streak is normally obtained by rubbing a mineral across a streak plate. This is a piece of unglazed porcelain. The streak plate has a hardness of around 7 and rough texture that allows the minerals to be abraded to a powder. This powder is the streak. Hematite has a reddish brown streak.

Mineral Identification Basics PHYSICAL PROPERTIES STREAK Sphalerite is a dark mineral, however, it has a light colored streak. Next to the reddish brown streak of hematite is a light yellow streak. This is the streak of the sphalerite. Sphalerite has a light yellow streak. Light colored streaks are often difficult to see against the white streak plate. It is often useful to rub your finger across the powder to see the streak color.

Mineral Identification Basics PHYSICAL PROPERTIES LUSTER LUSTER is defined as the quality of reflected light. Minerals have been grossly separated into either METALLIC or NON- METALLIC lusters. Following are some examples: Native Silver has a Metallic Luster

Mineral Identification Basics LUSTER METALLIC PHYSICAL PROPERTIES LUSTER METALLIC StibniteGalena Marcasite Pyrite

Mineral Identification Basics NON-METALLICLUSTER VITREOUS NON-METALLIC LUSTER VITREOUS Olivine - Peridot Wulfenite SpinelQuartz

Mineral Identification Basics NON METALLIC NON METALLIC LUSTER Miscellaneous Lusters Asbestos - SilkyApophyllite - Pearly Limonite - Dull or Earthy Sphalerite - Resinous Graphite has a greasy or submetallic luster and easily marks paper.

Mineral Identification Basics PHYSICAL PROPERTIES LUSTER This piece of Native Copper is severely weathered. It does not look metallic. This is the same piece but the left side has been buffed with a steel brush. Note the bright metallic luster. The moral to this story is to look at a fresh surface whenever possible.

Mineral Identification Basics PHYSICAL PROPERTIES COLOR The COLOR of a mineral is usually the first thing that a person notices when observing a mineral. However, it is normally NOT the best physical property to begin the mineral identification process. Following are some examples of color variation within mineral species followed by minerals that have a distinctive color: Various colors of CALCITE.

Clear - Without Impurities Mineral Identification Basics PHYSICAL PROPERTIES COLOR Various colors of Quartz. Hematite Inclusions Chlorite inclusions Amethyst Ionic Iron

Mineral Identification Basics INDICATIVE COLOR Turquoise Sulfur Malachite Rhodochrosite Azurite End Day 1

Mineral Identification Basics PHYSICAL PROPERTIES TASTE IT IS NOT RECOMMENDED THAT A TASTE TEST BE PERFORMED ON MINERALS AS A STANDARD PROCESS. SOME MINERALS ARE TOXIC. However, the mineral HALITE is common salt and has a unique taste. Halite cubes from Trona, CA include picture of salt and salt shaker

Mineral Identification Basics PHYSICAL PROPERTIES MAGNETISM MAGNETISM is the ability of a mineral to be attracted by a magnet. This most commonly is associated with minerals rich in iron, usually magnetite. This is a piece of MAGNETITE with a magnet adhering to it. Magnetite is strongly magnetic in that a magnet will easily be attracted to it.

Mineral Identification Basics PHYSICAL PROPERTIES MAGNETISM More sensitivity is achieved if instead of a large sample, small pieces are used. In this way, even weakly magnetic minerals will be attracted to the magnet.

Mineral Identification Basics PHYSICAL PROPERTIES MAGNETISM This is a sample of black sand from Lynx Creek, Arizona. Its dark color is due to its high concentration of magnetite. See what happens when a magnet is place beneath the bottom right portion of the paper. This technique is used to separate out much of the unwanted material in the search for gold in placer deposits.

Mineral Identification Basics PHYSICAL PROPERTIES MAGNETISM LODESTONE is a variety of Magnetite that is naturally a magnet.

Mineral Identification Basics PHYSICAL PROPERTIES DIAPHANEITY The manner in which minerals transmit light is called DIAPHANEITY and is expressed by these terms: TRANSPARENT: A mineral is considered to be transparent if the outline of an object viewed through it is distinct. TRANSLUCENT: A mineral is considered to be translucent if it transmits light but no objects can be seen through it. OPAQUE: A mineral is considered to be opaque if, even on its thinnest edges, no light is transmitted. Quartz with Spessartine Garnets

Mineral Identification Basics PHYSICAL PROPERTIES DIAPHANEITY TRANSPARENT: A mineral is considered to be transparent if the outline of an object viewed through it is distinct. Topaz from Topaz Mountain, Utah

Mineral Identification Basics PHYSICAL PROPERTIES DIAPHANEITY Sylvite from Salton Sea, California TRANSLUCENT: A mineral is considered to be translucent if it transmits light but no objects can be seen through it. Backlit Apophyllite Crystals

Mineral Identification Basics PHYSICAL PROPERTIES DIAPHANEITY Schorl - The black variety of Tourmaline OPAQUE: A mineral is considered to be opaque if, even on its thinnest edges, no light is transmitted.

Mineral Identification Basics DOUBLE REFRACTION DOUBLE REFRACTION : Is a property shared by many minerals ( but not those in the isometric crystal system). It is best displayed in the mineral CALCITE. This image clearly shows the double image below the calcite

Mineral Identification Basics CHEMICAL PROPERTIES REACTION TO HYDROCHLORIC ACID Some minerals, notably the carbonates, react to cold dilute HCl. In this illustration a piece of CALCITE is shown to react (fizz) after HCl is applied. Calcite Reacts to HCl

Density How much mass is in a given volume. D = m/v

Mineral Identification Basics PHYSICAL PROPERTIES CRYSTALS A CRYSTAL is the outward form of the internal structure of the mineral. The 6 basic crystal systems are: ISOMETRIC HEXAGONAL TETRAGONAL ORTHORHOMBIC MONOCLINIC TRICLINIC Drusy Quartz on Barite

Mineral Identification RESOURCES http://www.gc.maricopa.edu/earthsci/imagearchive/index.htm For lots of useful images of minerals and more facts about minerals, check out this web site:

This copyrighted Power Point CD was produced strictly for educational purposes. Any attempt at using the images within this program for monetary gain is illegal. The authors have given permission to use the program or parts of it, provided credit is given to the Arizona Mining and Mineral Museum, its Curator - Susan Celestian and the photographer - Stan Celestian. THE END

where do minerals come from? pg 16 minerals from magma magma comes from the mantle and cools. when...

Documents