whirlpool adp 450 wh

8/13/2019 Whirlpool ADP 450 WH

1/23

ADP 450


2/23

To review the section on troubleshooting Tips

will help you to solve some common problems

by yourself .

Dear Customer,

Please carefully read this manual before using thedishwasher, it will help you to use and maintain thedishwasher properly.

Pass it on to any subsequent owner of the appliance.

This manual contains sections on safety Instructions,Operating In structions, Installation Instructions andTroubleshooting Tips, etc.

The manufacturer, following a policy of constant

development and updating of the product, may

make modifications without giving prior notice.

Dishwasher Features.................................... ...3

A Water S of te ne r.. ..... .. .. .. .. .... .. .. .. .. .... .. .. .. .. ..4 ..

At tent io n befor e or af te r lo ad in g the Di sh was he rBaskets..........................................................9

Filtering System.............................................14

Caring for the Dishwasher..................... .........15.

How to use the 3 in 1 function............................8

B Loading the Salt into the Softener.................5

C Fil l the Rinse Aid Dispenser............. . . . .5 . .. . . . . .

D Function of Detergent .. . .. . .. . .. . . .. .. . .. . . .. .6 ........

Loading the upper ...............................9BasketLoading the Lower .... . . .. .. . . .. . . .. . . .. .. . . .. . . .10Basket

Cutlery Basket........................................... ...11

Wash Cycle Table...........................................12

Turning on the Appliance................................13Change the Programme.............. ................13....

At the En d of th e Wa sh Cy cle. .. .. .. .. ... .. .. .. ... .. .. .. 13

Positioning the Appliance................... ..........16..

Water Co nnection.................................. .......17.

Ab out Power Conn ect ion.. .. .. .. .. .. . .. .. ... .. .. .. .. .. .1 6.

Start of dishwasher................................ ......18..

Before calling for service........................... .....19.

Technical information.............................. .....21..

Control Panel...................................................3Keep it to refer to it at a later date.

If you can not solve the problems by yourself ,

please ask for the help of professional technicians.


3/23

1

This appliance must b e grounded. In the event of a

malfunction or breakdown, grounding will reduce

the risk of anelectric shock by providing a path of

least resistance of electric current. This appliance

is equipped with a cord having an equipment-

grounding conductor and a grounding plug.

The plug must be plugged into an appropriate outlet

that is installed and g rounded in accordance with

all local codes and ordinances.

Improper connection of the equipment-grounding

conductor can result in the risk of an electric shock.Check with a qualified electrician or service

representative if you are in doubt whether the

appliance is properly grounded. Do not modify theplug provided with the appliance; If it does not fit

the outlet. Have a proper outlet installed by a

qualified electrician.

Keep children away from detergent and rinse aid, keepchild away from the open door of the dishwasher,there could still be some detergent left inside.

renDo not abuse, sit on, or stand on the door or dishrack of the dishwasher.

Do not wash plastic items unless they are markeddishwasher safe or the equivalent. For plastic items

not so marked, check the manufacturer'srecommendations.Use only detergent and rinse additivesdesigned for an automatic dishwasher.Never use soap, laundry detergent, or handwashing detergent in your dishwasher. Keepthese products out of the re ach of children.

During installation, the power supply must notbe excessively or dangerously bent or flattened.Do not tamper with controls.

Do not operate your dishwasher unless allenclosure panels are properly in place. Openthe door very carefully if the dishwasher isoperating, there is a risk of w ater squirting out.

Do not place any heavy objects thedoor when it is open. The appliance could tipforward.

on or stand on

When loading items to be washed:

1) Locate sharp items so that they are not likelyto damage the door seal;

2 Warning: Knives and other utensils withsharp points must be loaded in the basketwith their points down or placed in ahorizontal position.

)

When using your dishwasher, you shouldprevent plastic items from coming into contactwith the heating element.(This instruction is onlyapplicable to machines with a visual heatingelement.)

If the supply cord is damaged, it must be replacedby the manufacturer or its service agent or asimilarly qualified person in order to avoid ahazard.

Please dispose of packing materials properly.

Use the dishwasher only for its intended function.

Remove the door to the washing compartment whenremoving an old dishwasher from service or discarding it.

Dishwasher detergents are strongly alkaline, theycan be extremely dangerous if swallowed.Avoidcontact with skin and eyes and keep children awayfrom the dishwasher when the door is open.

Check that the detergent comparment is emptyafter completion of the wash cycle.

The appliance is to be connected to the watermains using new hose sets and t hat old hose-setsshould not be reused.The maximum number of place settings to bewashed is 9.The maximum permissible inlet water pressure is1Mpa.The minimum permissible inlet water pressure is0.04Mpa.

Children should be supervised to ensure that they donot play with the appliance.

This appliance is not intended for use by persons(including children with reduced physical, sensory ormental capabilities, or lack of experience andknowledge ,unless they have been given supervisionor instruction concerning u se of the appliance by aperson responsible for their safety.

)

When using your dishwasher, follow the precautions listed below:

The door should not be left open,since this could increase the risk of tripping.


4/23

2

Dispose of t he dishwasher packaging material correctly.Al l pa ck agin g mate rial s c a n b e recy cled .Plastic parts are marked with the s tandard international abbreviations:

PE for polyethylene, e.g. sheet wrapping material

PS for polystyrene, e.g. padding material

POM polyoxymethylene, e.g. plastic clips

PP p ol yp r opy l en e , e .g . S al t fi ll e r

AB S Ac rylo ni tr il e B utad iene St yren e, e. g. Co ntro l Pa ne l .

Packaging material could be dangerous for children!For disposing of package and the appliance please go to a recycling centre. Therefore cutoff the power supply cable a nd make the door closing device u nusable.Cardboard packaging is manufactured from recycled paper and should be disposed in thewaste paper collection for recycling.By ensuring this product is disposed of correctly, you will help prevent potential negativeconsequences for the environment and human health, which could ot herwise be causedby inappropriate waste handling of this product.For more detailed information about recycling of this product, please contact your localcity office and your household waste disposal service.

DISPOSAL: Do not dispose th is product as unsorted municipal waste. Collection of suchwaste separately for special treatment is necessary.

WARNING!


5/23

Back ViewFront view

3

Program indicator lights and button: To selectone of the seven and show the washing program.2

3in1 indicator light / 3in1function button: To select and show 3in1 .

Start and reset button: To start the selected washingprogram or reset the washing program when themachine is working.

4 Power indicator light and switch: To turn on/offand show the power supply.

Main Filter

Detergent Dispenser

Cup Shelf

Cutlery Basket

Coarse Filter

Rinse Aid Dispenser

Inlet pipe connector

Drain pipe connectorLower Basket

SprayArms

Upper Basket1

Salt Container

3

Dishw asher Features

Contr ol Panel

before using it for the first time.

To get the best performance from your dishwasher, read all operating instructions

5

67

8

9

10

12

1132

4

11 12

1

2

3

4

5

6

7

8

9

10

on

Off

13

Tray ass13

2 3 4


6/23

Before using your dishwasher for the first time:

The water softener must be set manually, using the water hardness dial.The water softener is designed to remove minerals and salts from the water, which would havea detrimental or adverse effect on the operation of the appliance. The higher thecontent of these minerals and salts, the harder your water is. The softener should beadjusted according to the hardness of the water in your area. Your local Water Authoritycan advise you on the hardness of the water in your area.

A d j u s t i n g Sal t Co n s u m p t i o nThe dishwasher is designed to allow for adjustment in the amount of salt consumed based o n the hardness ofthe water used. This is intended to op timise and customise the level o f salt consumption.

1. Unscrew the cap from the salt container.2. There is a ring on the container with an arrow on it (see figure

on the side), if necessary, rotate the ring in the anticlockwisedirection from the "-" Setting toward the "+" si gn, based on thehardness of the water being used.It is recommended that adjustments should be made in

accordance with the following scheme:

Contact your local water board for information on the hardness of your water supply.

dH mmol/l

0~140~8 0~1.4 / 0 /

14~398~22 1.4~3.9 - 20 50

39~8022~45 3.9~8 Mid 40 25

+ 6 0 16

fH

0~10

10~28

28~56

Clarke

Clark: British degree

f H: F re nc h d eg re e

DH: German degree

dH=1.25 Clarke=1.78 fH=0.178mmol/lNote:1

WATER HARDNESS

Selector Position Salt consumption

(gram/cycle)Auto no my

(cycles/1kgs)

Please follow the steps below f or adjustment in salt consumption.

" "/

"-"

"+"

"Mid"

Note:2

Setting toward the"+" sign

Setting toward the"-" sign

Setting toward betweenthe "-" sign and "+" sign

No salt need added

45~60 80~107 56~75 8~11

4

A . Wat er So f t en er

A. Set the water softener

B. Pour 1 2 litre of water inside the salt container and then fill with dishwasher salt

C. Fill the rinse aid dispenser

D. Fill in detergent


7/23

normal for a small amount of water to come out of the salt c ontainer.It is

1. The salt container must only be refilled when the salt warning light in the control panel comes on.Depending on how well the salt dissolves, the salt warning light may still be on even though thesalt container is filled.If there is no salt warning light in the control panel (for some Models),you can estimate when to fillthe salt into the softener by the cycles that the dishwasher has run.

2. If there are spills of the salt, a soak or a rapid program should be run to remove the excessive salt.

Al wa ys use the sa lt in te nd ed fo r use wi th di sh wa sh er.The salt container is located beneath the lower basket and should be filled as explained in thefollowing:

Attention!Only use salt specifically designed for the use i n dishwashers! Every other type of

salt not specifically designed for the use in a dishwasher, especially table salt, willdamage the water softener. In case of damages caused by t he use of unsuitablesalt the manufacturer does not give any warranty nor is liable for any damages caused.

Only fill with salt just before starting one o f the complete washing programs.This will prevent any grains of salt or salty water, which may have been spilled,remaining on the bottom of the machine for any period of time, which may causecorrosion.

5

B. Loadin g th e Salt Int o th e Softener

C. Fi l l th e Rin se Aid Dispens er

The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can leavespots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is designed touse liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill thedispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black.The volume of the rinse aid container is about 110ml.

Rinse Aid Dispenser

Function of Rinse AidRinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.

Attention!Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.

A Remove the lower basket and then unscrew and remove the cap from the salt container.B Before the first wash, fill 1lt. of water in the salt container of your machine.C Place the end of the funnel (supplied) into the hole and introduce about 1kg of salt.

D After filling the container , screw the cap tightly back clockwise.

E Usually, the salt warning light will stop being illuminated within 2-6 days after the salt container has been filled withsalt.

F Immediately after filling the salt into the salt container, a washing program should be started (We suggest to use thesoak or rapid program). Otherwise the filter system, pump or other important parts of the machine may be damagedby salty water. This is out of warranty.


8/23


9/23

Amount of Detergent to Use

Proper Use of Detergent

Use only detergent specifically made for the use in dishwashers. Keep your detergent fresh and dry.Don't put powdered detergent into the dispenser until you're ready to wash dishes.

Dishwasher detergent is corrosive! Take care to keep it out of reach of children.WARNING!

Based on their chemical composition, detergents can be split in two basic types:

The use of normal washing programs in combination with concentrated detergentsreduces pollution and is good for your dishes; these wash programs are specifically matchedto the dirt-dissolving properties of the enzymes of the concentrated detergent. For this reason

normal wash programs in which concentrated detergents are used can achieve the sameresults that can otherwise only be achieved using intensive programs.

Detergent tablets of different brands dissolve at different speeds. For this reason somedetergent tablets cannot dissolve and develop their full cleaning power during shortprograms. Therefore please use long programs when using detergent tablets, toensure the complete removal of detergent residuals.

The dispenser must be refilled before the start of each wash cycle following the instructionsprovided in the wash cycle table . Your dishwasher uses less detergent and rinse aid thanConventional dishwasher. Generally, only one tablespoon of detergent is needed fora normal wash load. More heavily soiled items need more detergent. Always add thedetergent just before starting the dishwasher, otherwise it could get damp and will notdissolve properly.

Concentrated Detergent

Detergen t Tablets

Detergent Dispenser

Al wa ys ad d th e d eter ge nt ju st be fo re st ar ti ng ea ch wa sh cyc le .Only use branded detergent aid for dishwasher.

If the lid is closed: press release button. The lid will spring open.

conventional, alkaline detergents w ith caustic componentslow alkaline co ncentrated detergents with n atural enzymes

Normally new pulverised detergent is without phosphate. Thus the water softener function ofphosphate is not given. In this case we recommend to fill salt in the salt container even when

the hardness of water is only 6 dH. If detergents without phosphate are used in the case of hard wateroften white spots appear on dishes and glasses. In this case please add more detergent to reachbetter results. Detergents without chlorine do only bleach a little. Strong and coloured spots will notbe removed completely. In this case please choose a program with a higher temperature.

7


10/23

If you use 3in1 tablets in other programs, the appliance will not achieve a good performance.

Only the 3in1 function(for the program: intensive/Normal/Eco.) Can be used with 3in1 tablets.

Fill the detergent dispenser with d etergent.The marking indicates the dosing levels , asillustrated on the right:

The place of main wash cycle detergent placed ,MIN means approximately 20g of detergent.

The place of pre-wash cycle detergent placed ,approximately 5g o f detergent

Please observe the manufacturers dosing and storageRecommendations as stated on the detergent packaging.

Close the lid and press until it locks in place.

If the dishes are heavily soiled, place an additionaldetergent dose in the pre-wash detergent chamber. This detergent will take effect during the pre-wash phase.

A

B

Fil l i n Detergent

You find information about the amount of detergent for the single programme on the last page.

Please aware, that according to the level soiling and the specific hardness of water differences are possible.

Please observe the manufacturer's recommendations on the detergent packaging.

When using 3in1 combination / compact Detergents ,please pay attention to make sure thatthe size of the combination detergents fits to the dispenser so that combinationdetergents can be easily put into the dispenser, and the dispenser would not be broken.

Your dishwasher has a 3in1 function which needs no salt and rinse aid but a 3In1 tablet.This dishwasher comes with a 3in1 tablet container as an accessory.

1. The figure below shows how to hang the 3in1 tablet container on the upper basket.

2. Rotate the up per sprayer and change the location of the container to en sure the upper sprayer is notobstructed by the 3in 1 tablet container. Refer to the figure below for reference.

3. Put the 3in1 tablet into the container ,then start the 3in1 program.

How To Use The 3IN1 Fun ct i on

8

6


11/23

9

For best performance of the dishwasher, follow these loading guidelines. Features andappearance of baskets and cutlery baskets may vary from your model.

A t t en t i o n b ef o r e o r af ter L o ad i n g t h e Di s h w ash er B as k et sScrape off any large amounts of leftover food. Soften r emnants of b urnt food in p ans.It is not necessary to rinse the dishes under running water.

Place objects in the dishwasher in following way:1.Items such as cups, glasses, pots/pans, etc. are faced downwards.2.Curved items, or ones with recesses, should be loaded aslant so that water can run off.3.All utensils are stacked securely and can not tip over.4.All utensils are placed in the way that the spray arms can rotate freely during washing.

Very small items should not be washed in the dishwasher as they could easily fall out of the b askets.

Bowl M Bowl L( ) ( )

Glasses Dessert plate Saucers

Cups

Front(Egg)

Gravy ladle

Lo adin g the Upper RackThe upper rack is designed to hold more delicate and lighter dishware such as glasses, coffeeand tea cup and saucers, as well as plates, small bowls and shallow pans (as long as they arenot too dirty).

Position the dishes and cookware so that they do not get moved by the spray of water.

Upper wheels

Lower wheels

Ad justing the Upper BasketThe height of the upper basket can be adjusted in order to create more space for large utensilsboth for the upper/lower basket. The height of the upper basket can be adjusted by placing thewheels on different height of the rails. Long items, serving cutlery, salad servers and knivesshould be placed on the shelf so that they do not obstruct the rotation of the s pray arms.The shelf can be folded back or be removed when not required for use.


12/23

L o ad i n g t h e L o we r B ask e t

We recommend that you place large items which are most difficult to clean into the lower basket:pots, pans, lids, serving dishes and bowls, as shown in the figure to the right.It is preferable to place serving dishes and lids on the side of the racks in order to avoid blockingthe rotation of the top spray arm.

Pots, serving bowls, etc. must always be placed top down.

Deep pots should be slanted to allow water to f low out.The bottom basket feature fold down tine rows so that larger or more pots and pans can be loaded.

1. Cutlery basket

2. Dessert plates

3. Soup plates

4. Dinner plates

5. Oval platter6. Saucer

10


13/23

11

Cutlery Basket

For washing in the dishwasher the following cutlery/dishes

Cutlery with wooden, horn china ormother-of-pearl handlesPlastic items that are not heat re sistantOlder cutlery with glued parts that are nottemperature resistantBonded cutlery items or dishesPewter or cooper itemsCrystal glassSteel items subject to rustingWooden platters

Items made from synthetic fibres

Do not put in items that are dirty of cigarette ash, candle wax, lacquer or paint.If you buy new dishes please make sure that they are suitable for d ishwashers.

Some types of glasses can becomedull after a large number of washes

Silver and aluminum parts have atendency to discolour during washing

Glazed patterns may fade if machinewashed frequently

Please do not overload your dishwasher. There is only space for 9 standard dishes. Do notuse dish that is not suitable for dishwashers. This is important for good results and forreasonable energy consume.

Before loading the dishes, you should:Remove large left-overSoften remnants of burnt food in pans

Dishes and cutlery must not impede the rotation of the spray armsLoad hollow items such as cups, glasses, pans etc. with the opening downwards so thatwater cannot collect in the container or a deep base

NOTE:

NOTE:

Are not suitable Are of limited suitability

Loading cutlery and dishes

When loading the dishes and cutlery, please note:

Cutlery should be placed in the cutlery basket with the handles at the bottom. If the rack has side b askets, thespoons should be loaded separately into the appropriate slots, especially long utensils should be placed in thehorizontal position at the front of the upper basket as s hown in the picture.

Al wa ys lo ad sh arp ut en si ls wi th th e s ha rp

point down!

1 2 3 4 5 6 7

3 5 5 3

1 5 5 1

3 5 5 3

3 5 5 3

1 5 6 1

3 2 1 3

3 2 4 4

1 2 4 4

2 2 4 4

2 2 1 4

1 2 1 4

7 2 7 4

1. Tea spoons2. Dessert spoons3. Soup spoons4. Forks5. Knives6. Serving forks7. Serving spoons

Do not leave any item extend through bottom.Knives and other utensils with sharp pointsmust be loaded in the basket with their pointsdown or placed in an horizontal position.

It is dangerous to open the door when washing, because the h ot water may be scalded to y ou. The door should not beleft in the open po sition since this could present a tripping hazard.


14/23

Wash Cy cl e Tabl e

12

Meaning: need to fill rinse into the Rinse-Aid Dispenser.( )*En50242: This program is the test cycle, the rinse-aid dispenser

setting is recommended to be set to position 6.

Daily

Intensive

EN 50242

5/22g

For normally soiled loads,s uc h a s , p la te s, gl as se sand lightly soiled pans.Standard daily cycle.

pots

For the heaviest soiled loads,such as pots, pans, casseroledishes and dishes that havebeen sitting with dried foodon them for a while.

A sho rt er was h f or li gh tl ysoiled loads that do not

need drying.

Pre -wash

Pre- wash 50-wash

Wa sh ( 60 )Rinse

R in se ( 70 )Drying

Pre

Rinse

Pre-wash

Wa sh (5 0 )

R in se ( 60 )Drying

W as h ( 40 )R in se ( 45 )

17 1 0.81

17 3 1. 4

28 0.35

18.4

13.0

Eco.

22gFor lightly soiled loa ds,suchas plates,glasses,bowls andlightly soiled pans.

Pre-washWa sh (4 5 )

R in s e ( 60 )Drying

111 0. 7 11.0

7. 0

5/22g

To rinse d ishes that youplan to wash later that day.

Pre-wash 11 0.01 6. 0

Express

15g15g

Daily

Eco.

Intensive

3in1

3in1

For normally soiled loads,s uc h a s , p la t es , gl as se sand lightly soiled pans.standard daily cycle.

pots

For lightly soiled loads,suchas pl ates,glasses,bowls andlightly soiled pans.

For the heaviest soiled loads,such as pots, p ans, casseroledishes and dishes that havebeen sitting with dried foodon them for a while.

Pre- wash 60W as h (7 0 )RinseRinseR in se ( 70 )Drying

Pre-washW as h (5 0 )R in se ( 70 )Drying

Pre-washWa sh (4 5 )R in s e ( 70 )Drying

148 1. 0

128 0. 8

161 1.5 15.1

12.7

12.7

3in1

3in1

3in1

3in1

+

+

+

+

+

+


15/23

WARNING! It is dangerous to open the door when washing, because the hot water may scald you.

When the working cycle has finished, the buzzer of the dishwasher will sound for 8 seconds, then stop. Turn offthe appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher.Wait for a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while theyare still hot and more susceptible to breakage. They will also dry better.

Switch Off the DishwasherThe program has ended, only if there appears a 0 in the digital display (remaining program time).

1.Switch off the dishwasher by pressing the ON/OFF button.2.Turn off the water tap!

Open the door carefully.Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 minutesbefore removing from the appliance.Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way theywill be cooler and the drying will be improved.

Unloading the dishwasherIt is normal that the dishwasher is wet inside.Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket ontothe dishes in the lower one.

Turning On the Appliance

Change the Program...

Forgot to Add a Dish?

will working afte r 10 se cond s.continue

I f yo u op en t he d oo r , the m ach ine w il l paus e. W he n y ou cl ose th e d oor , t he m achi neduring a wash cycle

At the End of the Wash Cycle

13

S t ar t i n g a c y c l e w a s h

1 Draw out the lower and upper basket, load the dishes and push them back.It is commended to load the lower basket first, then the upper one (see the section entitled

Loading the Dishwasher ).2 Pour in the detergent (see the section entitled Salt, Detergent and Rinse Aid ).3 Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification of the

socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.4 Close the door, press the ON/OFF button, and the ON/OFF light will turn on. Press the program

button to select a desired wash cycle, After 3 seconds, the machine will work.

Premise:

1 A cycle that is underway can only be modified if it has only been running for a short

time. Otherwise, the detergent may have already been released, and the appliance may

have already drained the wash water. If this is the case, the detergent dispenser must

be refilled (see the section entitled " Loading the Detergent " ).

2 When you press the start/reset button more than 3 seconds, you can cancel the running

programme and select other programmes (see the section entitled " Starting a wash cycle. . . " ).

3 When you select Intensive/Normal/Eco.Programmes, you can select the 3in1 function.

A forgotten dish can be added at any time before the detergent cup opens.

Load the forgotten dishes.

Close the door, the dishwasher will start running againafter 10 seconds.

After the spray arms stop working,you can open the doorcompletely.2

Open the door a little to stop the washing.1 3

4


16/23

The filter prevents larger remnants of food or other objects from getting inside the pu m.The residues may block the fi lter, in th is case they must be removed.

The filter system consists of a coarse filter,a flat (Main filter)

And a mi cr ofil ter(F ine fi lte r) .

Food and soil particles trapped in this filter are pulverized by a

special jet on the lower spray arm and washed down to d rain.

Larger items, such as pieces of bones or glass, that could block

the drain are trapped in the coarse filter. To remove the items

caught by the filter, gently squeeze the tap on the top of this

filter and lift out.

This filter holds soil and food residues in the sump area and

prevents it from being redeposit on the dishes during wash cycle.

Main filter 1

Coarse filter2

Fine filter 3

2

3

1

Fi l ter i ng S ystem

Filter assemblyThe filter efficientlyFor best performance and results, the filter must be cleaned regularly. this reason, it is a good idea toremove the larger food particles trapped in the filter after each wash cycle by rinsing the semicircular filter andcup under running water. To remove the filter device, pull the cup handle in the upward direction.

removes food particles from the wash water, allowing it to be recycled during the cycle.For

WARNING!The dishwasher must never be us ed without the filters.Improper replacement of the filter may reduce the performance level of the applianceand damage dishes and utensils.

Step 1 Turn the filter in anti-clockwise direction,then lift it up.

Step 2 lift the Main filter up

Step 3 lift the Fine filter up

14

When following this procedure from step1 to step 3, the filter system will be removed;when following it from Step 3 to Step 1, the filter system will be installed.


17/23

The control panel can be cleaned by using a lightly dampened cloth.Aft er c le anin g, make sur e t o dr y i t th or oug hly.

For the exterior, use a good appliance polish wax.

Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.

Protect Against Freezing

1.Cut off the electrical power to the dishwasher.2.Turn off the water supply and disconnect the water inlet pipe from the water valve.3.Drain the water from the inlet pipe and water valve. (Use a pan to catch the water)4.Reconnect the water inlet pipe to the water valve.5.Remove the filter at the bottom of the tub and use a sponge to soak up water in the sump.

please take frost protection measures on the dishwasher in winter. Every fter washing cycles,

please operate as follows

time a

Cari ng fo r the Dishwash er

- Inspect the filters for blocking a fter every time the dishwasher has been used.- By unscrewing the coarse filter, you can remove the filter system. Remove any food remnants and

clean the filters under running water.

Remarks:

Cleanin g th e Fi l t er

Cleaning The Door

To clean the coarse filter and the fine filter, use a cleaning brush. Reassemble the filter parts as shown in the figureson the last page and reinsert the entire assembly in the dishwasher, positioning it in its seat and pressing downwards.

The entire filter assembly should be cleaned once a week.

When cleaning the filters, don't knock on them. O therwise, the filters could becontorted and the performance of the dishwasher could be decreased.WARNING!

To clean the edge around the door, you should use only a soft warm, damp cloth.

To avoid penetration of water into t he door lock and electrical components, do not

use a spray cleaner of any kind.

WARNING!

Never use a spray cleaner to clean the door panel as it may damage the door lock

and electrical c omponents.

Abra si ve ag ent s o r som e p aper towe ls sh ou ld no t be us ed beca u se of th e r is k o f

scratching or leaving spots on the stainless steel surface.

Cleaning the Spray ArmsIt is necessary to cl ean the spray arms regularly in order toremove the accumulation of scale from the hard waterand thus prevent blocking of spray arm jets and bearings.

We Suggest to poke the blocked spray arm jets with a needleto ensure good washing effect.

15

If your dishwasher cannot work because of the ice, p lease contact professional service persons.

Unscrew


18/23

It is recommend that you run a wash cycle with thedishwasher empty and the n remove the plug from thesocket, turn off the water supply and leave the door ofthe appliance slightly open. This will help the doorseals to last longer and prevent odours from formingwithin the appliance.

If the appliance must be moved, try to keep it in thevertical position. If absolutely necessary, it can bepositioned on its back.

One of the factors that cause odours to form in thedishwasher is food that remains trapped in the seals.Periodic cleaning with a damp sponge will prevent thisfrom occurring.

Ensure the voltage and frequency of the power being corresponds tothose on the rating plate. Only insert the plug into an electrical socket which is earthedproperly. If the el ectrical socket to which the appliance must be c onnected is notappropriate for the plug , replace the socket, rather than using a adaptors or the l ike asthey could cause overheating and burns.

Please look at the rating label to know the rating voltage and connect the dishwasher to the appropriate power supply.Use the required fuse 10 amp, time delay fuse or c ircuit breaker recommended and provide separate circuit servingonly this appliance.

This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of

electric shock by providing a path of least resistance for the electric current. This appliance is equipped with a

cord having an equipment-earthing conductor and an earthing plug. The plug must be plugged into an

appropriate outlet that is installed and earthed in accordance with all local standards and requirements.

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides,along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that canbe positioned either to the right or the left sides to facilitate proper installation.

Once the appliance is positioned for levelling, the height of the dishwashermay be altered via adjustment of the screwing level of the feet. In any case,

the appliance should not be inclined more than 2 .

Po s i t i o n i n g t h e A p p l i a n c e

A b o u t Po w er Co n n ec t i o n

WARNING!

for personal safety:DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE EARTHINGCONNECTION FROM THE POWER CORD.

Af ter ever y was h, tu rn off the wa ter sup pl y t o th eappliance and leave the door slightly open so thatmoisture and odours are not trapped inside.

Before cleaning or performing maintenance, always

remove the plug from the socket.

To clean the exterior and rubber parts of the dishwasher,do not use solvents or abrasive cleaning products.Only use a cloth with warm soapy water.To remove spots or stains from the surface of theinterior, use a cloth dampened with water an a littlevinegar, or a cleaning product made specifically fordishwashers.

Af te r Ev er y Wash

Remove the Plug

No Solvents or Abrasive CleaningMoving the Appliance

Seals

When not in Use for a LongTime

16


19/23

for personal safety:DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE

FROM THE POWER CORD.EARTHING

CONNECTION

Connect the cold water supply hose to a threaded 3/4(inch) connector and make surethat it is f astened tightly in place.If the water pipes are new or have not been used for an extended period of time, let thewater run to make sure that the water is clear. This precaution is needed to avoid therisk of the water inlet to be blocked and damage the appliance.

The water supply to the appliance can also be connected to the household hot waterline (such as, central system, heating system),as long as it does not exceed atemperature of 60 C. In this case, the wash cycle time will be shortened by about 15

minutes and the wash efficiency slightly reduced.The connection must be made to the hot water line following the same procedures asdescribed in the section for the connection to the cold water line.

Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let it run into the sink, making sure toavoid bending or crimping. Use the special plastic support that comes with the appliance. The free end of the hosemust be at a height between 40 and 100cm and must not be immersed in water.

WARNING! Improper connection of the equipment earthing conductor can result in the risk of an electric shock.Check with a qualified electrician or service representative if you are in doubt whether theappliance is properly earthed.

Do not modify the plug provided with the appliance. If the plug does not fit properly to the outlet,please have a qualified electrician to install a proper outlet.

In order to avoid that there is more water staying in the inlet hose, please closethe hydrant after using.(Not applicable to appliances without aqua-stop.)WARNING!

Water OutletConnect the water drain hose. The drain hose must be correctly fitted to avoid water leaks.Ensure that the water inlet hose is not kinked or squashed.

Water Con necti on

17


20/23

18

The following things should be checked before st arting the dishwasher.

Syphon ConnectionThe waste connection must be at a height of between 50 cm (minimum) and 100 cm (maximum)from the bottom of the dish. The water drain hose should be fixed by a hose clip.

Start o f Dis hw asher

The content of this manual is very helpful to t he users.

Af ter in st al la ti on, pl ea se make su re to keep thi s ma nua l.

Extension HoseIf you need a drain hose extension, make sure to use a similar drain hose.It must be no longer than 4 metres; otherwise the cleaning effect of the dishwasher could be reduced.

1 The dishwasher is level and fixed properly

2 The inlet valve is open

3 There is a leakage at the connections of the conducts

4 The wires are tightly connected

5 The power is switched on

6 The inlet and drain hoses are knotted

7 All packing materials and printings should be taken out from the dishwasher


21/23

Fuse blown, or the

circuit breaker acted

Replace fuse or reset circuit breaker. Remove any other

appliances sharing the same circuit with the dishwasher

Spilled rinse-aid Always wipe up rinse-aid spills immediately.

Hard water minerals

The affected items are

not corrosion resistant.

The lid of the softer

is loose

A sp ay arm is

knocking against

an item in a basket

r

Items of crockery

are loose in thewash cabinet

This may be causedby on-site installation

or the cross-section of

the piping.

A programme was not

run after dishwasher

salt was added.Traces of salt have

gotten into the wash cycle.

To clean the interior, use a damp sponge with

dishwasher detergent and wear rubber gloves.

Never use any other cleaner than dishwasher

detergent for the risk of foaming or suds.

Always run the quick wash programme .

without any crockery in the dishwasher and

without selecting the Turbo function (if present),after adding dishwasher salt.

Check the lip .Ensure the fix is fine.

Interrupt the programme, and rearrange the items

which are obstructing the sp ay arm.r

Interrupt the programme,

and rearrange the items of crockery.

This has no influence on the dishwasher function.if in doubt, contact a suitably qualified plumber.

Detergent with

colourant was used

Make sure that the detergent is the one without

colourant.

Improper detergent

Make sure the dishwasher is turned on and the door is

closed securely.

Check that the water supply is connected properly and

the water is turned on.

Make sure to close the door properly and latch it.

Make sure the power cord is properly plugged into the

wall socket.

Power supply is not

turned on

Error code:E1;Water pressure is low

Door of dishwashernot properly closed.

Kink in drain hose

Filter clogged

Kitchen sink clogged

Check drain hose.

Check coarse the filter

(see section titled )" Cleaning The Filter "

Check the kitchen sink to make sure it is draining well.

If the problem is the kitchen sink not draining ,you may

need a plumber rather than a serviceman for dishwashers.

Use only the special dishwasher detergent to avoid

suds. If this occurs, open the dishwasher and let sudsevaporate. Add 1 gallon of cold water to the tub. Close

and latch the dishwasher, then Start the "soak" wash

cycle to drain out the water . Repeat if necessary.

B efore Cal l i ng f or S ervi ce

19

Technicalproblems

Generalproblems

Noise


22/23

The dishes were not

loaded correctly.

See notes in " Loading the Dishwasher Baskets ".

Select a more intensive programme.

See" Wash Cycle Table ."

Use more detergent, or change your detergent.

Rearrange the items so that the sp ay can rotate freely.r

Clean and/or fit the filter combination correctly.

Clean the sp ay arm jets. See "Cleaning the Spray

Arms".

r

Use less detergent if you have soft water and select

a shortest cycle to wash the glassware and to get

them clean.

Use a mild abrasive cleaner to eliminate those marks.

Re-loading the dishes properly.

Load the dishwasher as suggested in the directions.

Increase the amount of rinse-aid/refill the rinse-aid

dispenser.

Do not empty your dishwasher immediately after

washing. Open the door slightly so that the steam can

escape. Begin unloading the dishwasher only once t

he dishes are barely warm to the touch. Empty the low

basket first. This prevents water form dropping offdishes in the upper basket.

In short program the washing temperature is lower.

This also lowers cleaning performance. Choosea program with a long washing time.

Water drainage is more difficult with these items.

Cutlery or dishes of this type are not suitable forwashing in the dishwasher.

The programme was

not powerful enough.

Not enough detergentwas dispensed.

Items are blockingthe path of spray arms.

The filter combinationin the base of washcabinet is not clean oris not correctly fitted.This may causethe sp ay arm jetsto get blocked.

r

Combination of softwater and too muchdetergent.

Aluminum utensilshave rubbed againstdishes.

Dishes blockdetergent cups.

Improper loading

Too little r inse-aid

Dishes are removedtoo soon

Wrong programhas been selected

Use of cutlery witha low-quality coating

20

Unsatis-factorywashingresult

Unsatis

-factorydryingresult


23/23

Height : 850mm

Width : 445mm

Depth : 580mm

Water pressure: 0.04-1.0MPa

Ho t wa te r co nne ct io n : ma x 60Power supply: see rating label

Capacity: 9 place settings

Technical Information

whirlpool adp 450 wh

Documents