WHO WE AREIntegrity Testing Services Inc. (ITS) is an independently owned and operated Integrity Assessment, Inspection and Non-destructive Examination Company operating within Western Canada.

ITS holds a Certi�cate of Authorization Permit (CAP) under the AB-5I5 program from ABSA.

We service Western Canada from two of�ce locations, our head of�ce located in Edmonton, Alberta and our district of�ce located in Swift Current, Saskatchewan. This allows us to better service our clientele from a geographical perspective.

We provide quality inspection and NDE services to the upstream and downstream oil & gas, petrochemical, pulp and paper, power generating and fabrication sectors throughout Western Canada.

Our mission is to provide a safe, quality, and cost effective professional service to our clientele by training and motivating our staff to perform their work with integrity and professionalism.

At ITS, public, environmental and personnel safety are at the forefront of our ideology; we are committed to providing a safe, integral, economic product to our clientele. We hold our CoR (Certi�cate of Recognition) through ACSA (Alberta Construction Safety Association) and ITS is on ISNetworld, ComplyWorks, PICS Canada and various other Safety orientated associations throughout the industry.

We employ highly trained, honest, knowledgeable, and professional staff that specializes in providing technical expertise in integrity assessment, inspection and non-destructive examination services. We ensure we provide competent technicians and inspectors for the services required by our clientele.

Through continued training and building upon our current knowledge base, we are able to provide our clientele with up-to-date inspection and examination techniques. Here at ITS, we take training very seriously and, with the ever changing industry, we believe that through continued training and education, we are able to provide the best services to our clientele.

GENERAL SERVICESIntegrity Testing Services Inc. (ITS) holds a Certi�cate of Authorization Permit (CAP) under the AB-5I5 program from ABSA.

ITS provides in-service pressure equipment assessments and visual inspections performed by PESL (Pressure Equipment Safety Legislation - Alberta) and PEI (Pressure Equipment In-Service - Saskatchewan) Class 1 and 2 certi�ed inspectors. We work alongside our clients and with their IMS (Integrity Management System) manuals to provide integrity, inspection and NDE services compliant to their IMS programs.

• IBPV and IPV Certified Inspectors • On-Stream Inspections • PEI Class 1 and 2 Inspectors • Thorough Inspections • API 510 Inspectors • Internal Inspections• API 570 Inspectors • Periodic Inspections • API 653 Inspectors • Shop Inspections (On behalf of owner-users)• National Board Inspectors

ITS offers storage tank assessment services performed by certified API 653 inspectors. We are capable of providing complete and thorough assessments of tanks. ITS has designed an in-depth training program with the consultation of MFE Enterprises for the operation and use of MFE 2412 Mark II and MFE 2412 Mark III tank �oor scanners.

In addition to assessment and inspection services, ITS offers NDE (Non-Destructive Examination) services: we provide highly trained and experienced certi�ed technicians to perform code compliant examinations.

• Basic and Advanced NDE Services • Magnetic Flux Leakage Examination Services• Ultrasonic Examination Services • Other NDE Services • Magnetic Particle Examination Services • On-stream corrosion detection and monitoring programs• Liquid Penetrant Examination Services • Owner-user equipment inventory and equipment management• Hardness Testing Services

Our inspection staff is multi-disciplined to provide cost effective assessment, inspection and/or examination services to our clientele. ITS strives to create longstanding partnerships with clientele to our mutual bene�t.

ITS offers turnaround pre-planning and inspection project management services and consulting. ITS in-service inspectors are available to offer management, consultation and recommendations on pressure equipment (based on previous history and operation) and current Owner-User IMS manuals.

Here at ITS, we have an extensive reporting and administrative department. We provide specialized programming and software development for clientele needs. We manage integrity data, inspection records and equipment details. Presently, ITS manages numerous corrosion monitoring programs. We provide timely and accurate reports to our clientele. We pride ourselves on the quality of our reporting we produce to our clientele. We provide CADD (Computer Aided Design and Drafting) images of equipment under examination and we use ITS proprietary software to aid in the management of clientele data. We have web-based programs to aid in the sharing of information between clientele, �eld staff and our head of�ce.

We cannot begin to express how excited we are about potential partnerships and we will gladly answer any questions you may have. If there are services that you wish to discuss, please do not hesitate to contact us.

We at ITS, thank you for your time and consideration.

IN-TOWN SERVICESIntegrity Testing Services Inc. (ITS) is an independently owned and operated Integrity Assessment, Inspection and Non-destructive Examination Company operating within Western Canada. We provide Quality Inspection and NDE Services to the fabrication sectors in Edmonton, AB; Swift Current, SK and surrounding area.

ITS employs highly trained knowledgeable and professional staff that specialize in providing technical expertise in Intergrity Assessment, Inspection and NDE services. Through continued training and building upon our current knowledge base, we are able to provide our clientele with up-to-date inspection and examination techniques performed by competent staff. ITS is consistently on the cutting edge and the integrity and professionalism of the organization is exhibited by each individual.

On behalf of Owner Users, ITS offers highly trained, experienced and certified (CWB, NB, API, IBPV, IPV, PEI Class 1, PEI Class 2) Inspectors, to perform code compliant inspections. Inspection Services include (but not limited to):• Shop Inspections• Vendor Audits (based on the Owner Users IMS Program)• Vendor Surveillance• Witnessing of Hydrostatic Tests, Pneumatic Tests, Function Tests, etc.

On behalf of the Fabrication Facility, ITS offers ‘on-site’ NDE (Non-Destructive Examination) services, we provide highly trained, experienced and certi�ed CGSB Technicians, to perform new construction in-service, repair and alteration code compliant examinations. NDE Services include (but not limited to):

Magnetic Particle Examination Ultrasonic Examination• Black on White (Yoke Technique) • Manual Straight Beam (Thickness and Volumetric Examination)• Dry (Yoke Technique) • Manual Shear-wave (Volumetric Examination, • Wet Fluorescent (Yoke Technique) inclusive of pipe, plate, welds, etc.)

Liquid Penetrant Examination Magnetic Flux Leakage Examination• Visible Water Wash Hardness Testing• Visible Solvent Removable Other NDE Services• Fluorescent Water Wash• Fluorescent Solvent Removable

We cannot express how excited we are about potential partnerships and we will gladly answer any questions you may have. If there are services that you wish to inquire about, please do not hesitate to contact us.

We at ITS, thank you for your time and consideration.

QUALITY ASSURANCE SERVICESIntegrity Testing Services Inc. (ITS) offers Quality Assurance and Quality Control services in relation to manufacturing (shop and �eld), installation (�eld), maintenance, repairs and alterations. We provide highly trained and experience certi�ed inspectors to manage the quality of workmanship for a given project, in addition to Assessment, Inspection, and NDE (Non-Destructive Examination) services.

ITS is capable of supplying QA/QC personnel to satisfy the ever growing demands of the industry. The following are types of personnel and services ITS is capable of supplying:

Quality Assurance and Quality Control Management Services a. Drawing, Design, Calculation and Speci�cation Control b. Material Control c. Welding / Brazing Control d. Welder / Brazer Qualification Control e. Examination and Inspection Control i. Nondestructive Examination ii. Heat Treatment iii. Hydrostatic / Pneumatic Testing

Certi�ed Personnel a. QA/QC Leads / Supervisors b. QA/QC Inspectors c. QA/QC Inspectors – NRCan/CGSB NDE Examiners i. Ultrasonic Examiners ii. Magnetic Particle Examiners iii. Penetrant Testing Examiners iv. Hardness Testing Examiners v. Magnetic Flux Leakage Examiners

QA/QC Administration Staff a. Document Control i. Management of Data and Reports (MTR’s, Examination Reports, Hydro Reports, etc.) ii. Calibration Reports of Testing Equipment iii. Correction of Nonconformities iv. Records Retention

We cannot express how excited we are about potential partnerships and we will gladly answer any questions you may have. If there are services that you wish to inquire about, please do not hesitate to contact us.

We at ITS, thank you for your time and consideration.

ENGINEERING SERVICESIntegrity Testing Services Inc. (ITS) is an independently owned and operated Integrity Assessment, Inspection and Non-destructive Examination Company operating within Western Canada.

Through partnerships with individual engineering �rms (with the appropriate permit to practice), ITS is capable of providing engineering services such as:

ConsultationFrequently owner/users need to perform an inspection but may not know the best inspections to be performed. This is frequently encountered where equipment requires repairs but the extent of the damage is unknown and needs to be quanti�ed to enable an effective repair to be performed. This can be associated with the recommendation of a repair method and then may be followed up by further inspection of the item during repair and/or when the repair is completed. This type of consultation ITS can aid in providing.

Condition Status and Life ExpectancyTo determine the condition of a component, inspections may be performed; but owner/users may not have the knowledge to apply or evaluate the inspection data to provide a useful life expectancy or future inspection/maintenance requirements and this is where ITS can aid.

Repairs and AlterationsThese are cases where owner/users know there are failed components but do not know if and how it can be repaired. This is where ITS can aid, there are opportunities to evaluate the failed item propose a weld repair and then perform the appropriate inspections.

Fitness for ServiceA component of the �tness for service of pressure equipment is engineering and would provide additional resources for the work performed by the inspector.

We cannot express how excited we are about potential partnerships and we will gladly answer any questions you may have. If there are services that you wish to inquire about, please do not hesitate to contact us.

We at ITS, thank you for your time and consideration.

Material Selection (during a repair or alteration process) Recommendations regarding the selection of materials. This may include the proposal of alternative materials where the original material has been found to be inadequate or have given poor service due to corrosion/strength or fabrication limitations.

Welding Process (during a repair or alteration process) Recommendations regarding welding processes/welding consumables. Assistance regarding weld procedures can be given, in speci�c cases provide a weld repair procedure (there are limitations associated with the developing of welding procedures).