wilton drilling jet drilling - :: cecuamaqcecuamaq.com/pdf/wilton taladros pedestal.pdf · 92...
TRANSCRIPT
JE
T D
RIL
LIN
G
jettools.com90
DRILLING WILTO
N D
RILLIN
G
Belt Drive Drill Presses . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Variable Speed Drill Presses . . . . . . . . . . . . . . . . . . . . . . 94
Geared Head Drill Presses . . . . . . . . . . . . . . . . . . . . . . . . 97
Direct Drive Drill Presses . . . . . . . . . . . . . . . . . . . . . . . . 101
Radial Arm Drill Presses . . . . . . . . . . . . . . . . . . . . . . . . 103
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
92
WIL
TO
N D
RIL
LIN
G
DRILLING
93
WIL
TO
N D
RIL
LIN
G
DRILLING
15" AND 20" DRILL PRESSES
• Cast iron head
• Large quill allows greater accuracy
• Head casting features a permanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings mounted in an enclosed quill for extended life
• Massive T-slotted production work table (Model 2550 only)
• Table tilts 45°
• Large ground steel column diameter for maximum head and table support
• 3-3/8" stroke for deep hole applications
• Accurate depth stop for precise hole depths
STANDARD EQUIPMENT
• 5/8" Drill chuck and arbor
15" AND 20" DRILL PRESSES
STOCK NUMBER 2530 2500 2550
Type 15" Bench 15" Floor 20"Floor
Drills to Center of Circle (in.) 15 15 20
Cast Iron Drilling Capacity (max./in.) 5/8 5/8 3/4
Steel Drilling Capacity (max./in.) 1/2 1/2 5/8
Quill Diameter (in.) 1-7/8 1-7/8 2-1/4
Quill Travel (in.) 3-3/8 3-3/8 4-3/4
Spindle Taper 2 MT 2 MT 3 MT
Number & Range of Spindle Speeds (RPM) 12 (250, 340, 390, 510, 600, 650, 990, 1550, 1620, 1900, 2620, 3100)
12 (250, 340, 390, 510, 600, 650, 990, 1550, 1620, 1900, 2620, 3100)
12 (150, 260, 300, 440, 490, 540, 1150, 1550, 1840, 2220, 2950, 4200)
Overall Table Size (in.) 10 x 10 10 x 10 18-1/2 x 16-1/2
Table Working Surface (in.) 10 x 10 10 x 10 14 x 16
T-slot Number & Size (in) N/A N/A 3 & 1/2
Column Diameter (in.) 2-7/8 2-7/8 3-5/8
Base Size (in.) 11 x 18-1/2 11 x 19-1/2 22-3/4 x 17-3/4
Spindle to Base (in.) 24-1/2 48-3/4 43-1/2
Motor 3/4HP, 115V, 1Ph, 1725 RPM 3/4HP, 115V, 1Ph, 1725 RPM 1-1/2HP, 115V, 1Ph, 1725 RPM
Floor Space Required (in./L x W x H) 26 x 13-3/8 x 39 26 x 13-3/8 x 63-1/2 34 x 21 x 67
Net Weight (lbs.) 157 185 321
*Capacities for continuous production use will vary based on application
2530 2500 2550
92
WIL
TO
N D
RIL
LIN
G
DRILLING
93
WIL
TO
N D
RIL
LIN
GDRILLING
15" 6-SPEED DRILL PRESSES
• Constructed to provide a solid base for drilling
• Offers a greater range in spindle speeds than others in this class
• Larger quill provides greater accuracy
• Large production work table give the operator the room to work and support for the job
• 3" Column for head support, while the quill is also supported to lessen deflection
STANDARD EQUIPMENT
• 1/2" Drill Chuck and arbor
15" 6- SPEED DRILL PRESSES
STOCK NUMBER A3816 A3836
Type 15" Floor 15" Bench
Drills to Center of Circle (in.) 15 15
Cast Iron Drilling Capacity (in.) 5/8 5/8
Steel Drilling Capacity (in.) 1/2 1/2
Quill Diameter (in.) 2-1/4 2-1/4
Spindle Travel (in.) 6 6
Number of Spindle Speeds 6 6
Spindle Speeds (RPM) 375, 625, 1125, 1950, 3400, 5000
375, 625, 1125, 1950, 3400, 5000
Table Overall/Table Working Surface (in.)
15-1/4 x 17-3/4/ 12-1/2 x 14-1/2
14-1/4 x 12-3/8 / 10-5/8 x 12-3/8
T-slot Number & Size (in.) 2 & 1/2 2 & 1/2
Spindle to Table (in.) 41
Spindle to Base (in.) 47-1/2 11
Overall Height (in.) 67-1/2 36-1/2
Spindle Taper 2 MT 2MT
Column Diameter (in.) 3 3
Table Capacity (max./lbs.) 100 100
Motor 1HP, 115/230V, 1Ph Prewired 115V
1HP, 115/230V, 1Ph Prewired 115V
Floor Space Required (in./L x W x H) 30 x 20 x 71
Net Weight (lbs.) 394 375
A3816
wiltontool.com
WIL
TO
N D
RIL
LIN
G
94
DRILLING
95
WIL
TO
N D
RIL
LIN
G
DRILLING
15" VARIABLE SPEED DRILL PRESSES
• Speeds from 400 to 5,000 RPM
• Handwheel adjustment sets the speeds
• Large 2-1/4" quill allows greater accuracy
• 3" column diameter for maximum head support
• Full bearing support on quill for maximum spindle stiffness
• 6" stroke for deep hole applications
• Accurate depth stop for precise hole depths
• 1/2" Drill chuck and arbor
• Safety collar
15" VARIABLE SPEED DRILL PRESSES
STOCK NUMBER A5816/A5818 A5836/A5838
Type 15" Floor 15" Bench
Drills to Center of Circle (in.) 15 15
Cast Iron Drilling Capacity (max./in.) 5/8 5/8
Steel Drilling Capacity (max./in.) 1/2 1/2
Column Diameter (in.) 3 3
Quill Diameter (in.) 2-1/4 2-1/4
Spindle Taper 2 MT 2 MT
Spindle Travel (in.) 6 6
Spindle Speeds (RPM) 400 to 5000 400 to 5000
Overall Table Size (in.) 15-1/4 x 17-3/4 14-1/4 x 21
Table Working Surface (in.) 12-1/2 x 14-1/2 10-5/8 x 12-3/8
T-slot Number & Size (in.) 2 & 1/2 2 & 1/2
Spindle to Table (in.) 41
Spindle to Base (in.) 47-1/2 11
Overall Height (in.) 67-1/2 36-1/2
Motor A5816/A5836 1 HP, 115/230V, 1Ph, Prewired 115V
1 HP, 115/230V, 1Ph, Prewired 115V
Motor A5818/A5838 1HP, 230/460V, 3Ph, Prewired 230V
1HP, 230/460V, 3Ph, Prewired 230V
Floor Space Required (in./L x W x H) 30 x 20 x 71
Net Weight (lbs.) 426 336
*Capacities for continuous production use will vary based on application
A5816
A5836
wiltontool.com
WIL
TO
N D
RIL
LIN
G
94
DRILLING
95
WIL
TO
N D
RIL
LIN
GDRILLING
20" VARIABLE SPEED DRILL PRESSES
• Variable spindle speeds from 300 to 2000 RPM
• External #3 Morse Taper
• Front mounted positive control depth stop
• 6" quill travel
• Massive 3" quill diameter
• Heavy duty cast iron design
• Large precision ground T-slot production table for easy set ups
• Front or side rack and worm gear table raiser
• Table rotates 360° around the column
• Machined T-slotted base
• Head is massively constructed for more accuracy and rigidity
OPTIONAL EQUIPMENT STOCK NUMBER
Coolant system, 1/8HP pump, 115/220V, 1Ph 5512104
Coolant system, 1/8HP pump, 220/440V, 3Ph 5508071
Jacob's chuck, 3/16"–3/4", keyed with #3 arbor 5108010
20" VARIABLE SPEED DRILL PRESSES
STOCK NUMBER 2221VS 2223VS
Drills to Center of Circle (in.) 20 20
Cast Iron Drilling Capacity (in.) 1-1/4 1-1/4
Steel Drilling Capacity (in.) 1 1
Column Diameter (in.) 4-1/2 4-1/2
Range of Spindle Speeds (RPM) 300 to 2000 300 to 2000
Distance Spindle to Column (max./in.) 10-7/16 10-7/16
Distance Spindle to Table (in.) 32-3/8 32-3/8
Spindle Travel (in.) 6 6
Spindle Taper 3 MT 3 MT
Quill Diameter (in.) 3 3
Table Size (in.) 18-1/8 x 14-3/4 18-1/8 x 14-3/4
T-slot Number & Size (in.) 2 & 5/8 2 & 5/8
Table Travel (in.) 32-3/8 32-3/8
Base Working Surface (in.) 15-1/4 x 12-1/16 15-1/4 x 12-1/16
Base Slots Number & Size (in.) 2 & 5/8 2 & 5/8
Motor for 2221VS 2HP, 115/230V, 1Ph, Prewired 115V
2HP, 230/460V, 3Ph, Prewired 230V
Floor Space Required (in./L x W x H) 34-1/4 x 27 x 77-1/4 34-1/4 x 27 x 77-1/4
Net Weight (lbs.) 715 715
* Capacities for continuous production use will vary based on application
wiltontool.com
WIL
TO
N D
RIL
LIN
G
96
DRILLING
97
WIL
TO
N D
RIL
LIN
G
DRILLING
STOCK NUMBER 2232AC 2234AC
Drills to Center of Circle (in.) 20 20
Cast Iron Drilling Capacity (in.) 1-1/2 1-1/2
Steel Drilling Capacity (in.) 1-3/8 1-3/8
Quill Diameter (in.) 3 3
Distance Spindle to Column (in.) 10-7/16 10-7/16
Distance Spindle to Table (max./in.) 32-3/8 32-3/8
Spindle Speeds (RPM) 65 to 2000 65 to 2000
Spindle Travel (in.) 6 6
Spindle Taper 3 MT 3 MT
Quill Travel (in.) 6 6
Column Diameter (in.) 4-1/2 4-1/2
Table Working Surface (in.) 18-1/8 x 14-3/4 18-1/8 x 14-3/4
T-slot Number & Size (in.) 2 & 5/8 2 & 5/8
Table Travel (in.) 32-3/8 32-3/8
Table Overall Size (in.) 22 x 18-3/4 22 x 18-3/4
Base Working Surface (in.) 15-1/4 x 12-1/16 15-1/4 x 12-1/16
Base Slots Number & Size (in.) 2 & 5/8 2 & 5/8
Overall Base Size (in.) 27-2/4 x 20 27-2/4 x 20
Motor 2HP, 230V, 3Ph 2HP, 460V, 3Ph
Floor Space Required (in./L x W x H) 37 x 27 x 82-1/4 37 x 27 x 82-1/4
Net Weight (lbs.) 792 792
OPTIONAL EQUIPMENT STOCK NUMBER
Coolant system, 1/8HP pump, 220V/440V, 3Ph 5508071
Coolant system, 1/8HP pump, 115V/220V, 1Ph 5512104
Jacob's chuck, 3/16"–3/4", keyed with #3 arbor 5108010
ELECTRONIC VARIABLE SPEED DRILL PRESSES
• Variable spindle speeds from 65 to 2000 RPM
• #3 Morse taper spindle
• Latest AC inverter variable speed technology
• High torque at all speeds both forward and reverse
• Continuous speed adjustment while in operation
• Front mounted LED spindle RPM readout
• Forward and reverse for tapping
• Emergency stop
• Front mounted positive control depth stop
• Large precision ground T-slot production table for easy set ups
• Head is massively constructed for more accuracy and rigidity
ELECTRONIC VARIABLE SPEED DRILL PRESSES
wiltontool.com
WIL
TO
N D
RIL
LIN
G
96
DRILLING
97
WIL
TO
N D
RIL
LIN
GDRILLING
OPTIONAL EQUIPMENT STOCK NUMBER
Keyless drill chuck and arbor KDC130-MT3
Jacobs drill chuck, key and arbor 5108010
Foot operated start/stop switch 5245631A
Flanged Quill 2G08459
5-speed forward/reverse switch* 1820061
Foot reversing switch* 5245631
* 3 phase machines only
20" WILTON/ARBOGA GEAR HEAD DRILL PRESSES
• Helical gears for smooth, quiet operation
• Quick release drill ejector
• Safety latch to prevent head dropping when unclamped
• Eight spindle speeds
• T-Slotted table with coolant trough
• Head and table rotate 360° around column
• 2 position, High/Low switch
• 3-15/16" Column diameter
• English/Metric depth gauge
20" WILTON/ARBOGA GEAR HEAD DRILL PRESSES
STOCK NUMBERA2608-1/ A2608-2/
A2608-4A2608M-PF2/A2608M-PF4
Drills to Center of Circle (in.) 20 20
Drilling Capacity Mild Steel (in.) 1-1/4 1-1/4
Tapping Capacity Mild Steel (in.) 1/2 1/2
Column Diameter (in.) 3-15/16 3-15/16
Distance Spindle to Table (max./in.) 35-5/8 35-5/8
Spindle Taper 3 MT 3MT
Spindle Speeds (RPM) 8 (130, 260, 420, 840, 535,1070, 1745, 3480)
8 (130, 260, 420, 840, 535,1070, 1745, 3480)
Quill Feed Manual Power Feed
Quill Feed Rates (IPR) N/A (.004, .006, .009, .012)
Quill Travel (in.) 5-1/8 5-1/8
Quill Diameter (in.) 2-3/8 2-3/8
Vertical Movement of Drill Head 8-5/8 8-5/8
Table Size (in.) 15-3/4 x 19-3/4 15-3/4 x 19-3/4
T-slot Number & Size (in) 2 & 9/16 2 & 9/16
Table Weight Capacity (lbs.) 350 350
Vertical Movement of Table (in.) 24-1/2 24-1/2
Motor for A2608-1 (2 speed) 3/4 to 1HP, 115V, 1Ph
Motor for A2608-2 (2 speed) 1 to 1-1/2HP, 220V, 3Ph 1 to 1-1/2HP, 220V, 3Ph
Motor for A2608-4 (2 speed) 1 to 1-1/2HP, 440/460V, 3Ph 1 to 1-1/2HP, 440/460V, 3Ph
Floor Space Required (in./L x W x H) 24 x 22 x 72 24 x 22 x 72
Net Weight (lbs.) 475 600
A2608M-PF2
wiltontool.com
WIL
TO
N D
RIL
LIN
G
98
DRILLING
99
WIL
TO
N D
RIL
LIN
G
DRILLING
STOCK NUMBER A3808M-PF2 A3808M-PF4
Drills to Center of Circle (in.) 25 25
Drilling Capacity Mild Steel (in.) 1-3/8 1-3/8
Tapping Capacity Mild Steel (in.) 3/4 3/4
Column Diameter (in.) 4-15/16 4-15/16
Range of Spindle Speeds (RPM) 8(90, 190, 320, 640, 530, 1060, 1790, 3610)
8(90, 190, 320, 640, 530, 1060, 1790, 3610)
Spindle Taper 4MT 4MT
Quill Feed Power Feed Power Feed
Distance Spindle to Table (max./in.) 32 32
Quill Feed Rates (IPR) 4 (.004, .006, .009, .012) 4 (.004, .006, .009, .012)
Quill Travel (in.) 5-1/8 5-1/8
Quill Diameter (in.) 2-3/8 2-3/8
Vertical Movement of Drill Head (in.) 9 9
Table Size (in.) 15-3/4 x 19-1/2 15-3/4 x 19-1/2
T-slot Number & Size (in) 2 & 9/16 2 & 9/16
Table Weight Capacity (lbs.) 350 350
Vertical Movement of Table (in.) 24-1/2 24-1/2
Motor 2-1/4 to 3HP, 220V, 3Ph, 2-Speed 2-1/4 to 3HP, 460V, 3Ph
Floor Space Required (in./L x W x H) 26 x 23 x 71 26 x 23 x 71
Net Weight (lbs.) 640 640
25" WILTON/ARBOGA GEAR HEAD DRILL PRESSES
• Helical gears for smooth, quiet operation
• Quick release drill ejector
• English/Metric depth gauge
• T-Slotted table and base with coolant trough
• Automatic feed control buttons located on feed levers
• Electro-magnetic clutch power feed
• Head and table rotate 360° around column
• No-volt release prevents spindle start when power returns after shut down
OPTIONAL EQUIPMENT STOCK NUMBER
Automatic spindle reverse 1T05030
Foot reversing switch 5245631
Foot operated start/stop switch 5245631A
25" WILTON/ARBOGA GEAR HEAD DRILL PRESSES
wiltontool.com
WIL
TO
N D
RIL
LIN
G
98
DRILLING
99
WIL
TO
N D
RIL
LIN
GDRILLING
26" WILTON/ARBOGA GEAR HEAD DRILL PRESSES
• Helical gears for smooth, quiet operation
• Quick release drill ejector
• English/Metric depth gauge
• Machined, T-Slotted base plate
• Head and table rotate 360° around column
• No-volt release prevents spindle start when power returns after shut down
• Fully enclosed spindle
OPTIONAL EQUIPMENT STOCK NUMBER
Flanged Quill 1T08019
Automatick spindle reverse 1T05030
Foot reversing switch 5245631
Foot operated start/stop switch 5245631A
26" WILTON/ARBOGA GEAR HEAD DRILL PRESSES
MODEL NUMBER A3008-2/ A3008-4A3008M-PF2/ A3008M-PF4
Drills to Center of Circle (in.) 26 26
Drilling Capacity Mild Steel (in.) 1-1/4 1-1/4
Tapping Capacity Mild Steel (in.) 5/8 5/8
Distance Spindle to Table (max./in.) 35 35
Spindle Taper 3MT 3MT
Range of Spindle Speeds (RPM) 8(90, 190, 320, 530 ,640, 1060, 1790, 3610)
8 (90, 190, 320, 530,640, 1060, 1790, 3610)
Column Diameter (in.) 4-1/2 4-1/2
Quill Feed Manual Power Feed
Quill Feed Rates (IPR) 4 (.004, .006, .009, .012)
Quill Travel (in.) 6 6
Quill Diameter (in.) 2-7/16 2-7/16
Vertical Movement of Drill Head (in.) 9 9
Table Size (in.) 15-3/4 x 19-3/4 15-3/4 x 19-3/4
T-slot Number & Size (in) 2 & 9/16 2 & 9/16
Table Weight Capacity (lbs.) 450 450
Vertical Movement of Table 30 30
Motor for A3008-2/ A3008M-FP2 (2 speed) 1-1/2 to 2HP, 220V, 3Ph 1-1/2 to 2HP, 220V, 3Ph
Motor for A3008-4/ A3008M-FP4 (2 speed) 1-1/2 to 2HP, 440/460V, 3Ph 1-1/2 to 2HP, 440/460V, 3Ph
Floor Space Required (in./L x W x H) 28 x 24 x 72 28 x 24 x 72
Net Weight (lbs.) 565 600
A3008M-PF2
wiltontool.com
WIL
TO
N D
RIL
LIN
G
100
DRILLING
101
WIL
TO
N D
RIL
LIN
G
26" WILTON/ARBOGA GEAR HEAD DRILL PRESSES
• Helical gears for smooth, quiet operation
• Quick release drill ejector
• English/Metric depth gauge
• Machined, T-Slotted base plate
• Head and table rotate 360° around column
• No-volt release prevents spindle start when power returns after shut down
• Fully enclosed spindle
• Large T-Slotted Table
STOCK NUMBER A4008-2 / A4008-4A4008M-PF2/ A4008M-PF4
Drills to Center of Circle (in.) 26 26
Drilling Capacity Mild Steel (in.) 1-7/8 1-7/8
Tapping Capacity Mild Steel (in.) 1 1
Column Diameter (in.) 5-1/2 5-1/2
Range of Spindle Speeds (RPM) 8 (108, 162, 240, 360,528, 805, 1175, 1800)
8 (105, 162, 240, 360,528, 805, 1175, 1800)
Spindle Taper 4 MT 4 MT
Quill Feed Manual Power Feed
Quill Feed Rates (IPR) 4 (.004, .006, .009, .013 )
Quill Travel (in.) 8 8
Quill Diameter (in.) 2-3/4 2-3/4
Distance Spindle to Table (max./in.) 32 32
Table Size (in.) 20 x 24 20 x 24
Table Weight Capacity (lbs.) 550 550
Vertical Movement of Table (in.) 25 25
Motor for A4008-2/ A4008M-PF2 3HP, 220V, 3Ph 3HP, 220V, 3Ph
Motor for A4008-4/A4008M-PF4 3HP, 440/460V, 3Ph 3HP, 440/460V, 3Ph
Floor Space Required (in./L x W x H) 23 x 28 x 81 23 x 28 x 81
Net Weight (lbs.) 700 750
OPTIONAL EQUIPMENT STOCK NUMBER
Foot operated start/stop switch 5245631A
Automatic spindle reverse 1T05030
Foot reversing switch 5245631
Flanged Quill 2GO8599
26" WILTON/ARBOGA GEAR HEAD DRILL PRESSES
A4008-2
wiltontool.com
WIL
TO
N D
RIL
LIN
G
100
DRILLING
101
WIL
TO
N D
RIL
LIN
G
STOCK NUMBER 2350 2360 2380
Drills to Center of Circle (in.) 28 30 33
Cast Iron Drilling Capacity (in.) 1-7/8 2-5/32 2-7/8
Steel Drilling Capacity (in.) 1-3/4 2 2-3/4
Cast Iron Tapping Capacity (in.) 1-3/4 2 2-3/8
Steel Tapping Capacity (in.) 1-9/16 1-3/4 2-1/8
Quill Diameter (in.) 3.228 3.465 3.78
Distance Spindle to Column (max./in.) 14 15 16-1/2
Number & Range of Spindle Speeds (RPM) 9 (82, 120, 180, 240, 354, 528, 678, 1026, 1524)
9 (55, 98, 156, 198, 346, 456, 576, 822, 1338)
12 (42, 58, 86, 116, 154, 249, 304, 412, 554, 748, 1098, 1458)
Automatic Feeds (in.) .004, .008, .012, .016 .003, .006, .010, .014 .002, .004, .006, .008, .014, .020
Spindle Travel (in.) 9 10 11
Spindle Distance to Base (in.) 49 50 51
Spindle Distance to Table (min./in.) 2.67 2-3/4 2-3/4
Spindle Distance to Table (max./in.) 30-1/2 30-1/2 30-1/2
Table Size (in.) 22 x 19 22 x 19 23-1/2 x 23-1/2
T-Slot Size (in.) 1/2 5/8 5/8
Work Table Capacity (lbs) 400 400 400
Spindle Taper 4MT 4MT 5MT
Base Slots Size (in.) 5/8 5/8 5/8
Motor 3HP, 230/460V, 3PhPrewired 230V
4HP, 230/460V, 3PhPrewired 230V
7-1/2HP, 230/460V, 3PhPrewired 230V
Floor Space Required (in./ L x W x H) 40 x 30 x 95 53 x 30 x 108 55 x 33 x 110
Net Weight (lbs) 1840 2405 3065
DIRECT DRIVE ROUND COLUMN DRILL PRESSES WITH MECHANICAL CLUTCH
• Two speed forward and reverse switch
• Mechanical Powerfeed clutch engagement
• Heavy duty quill and spindle
• Tempered, ground spindle with internal taper mounted in precision bearings for maximum accuracy, minimizing defl ection
• Speed and feed selectors are located on one side of the drill head for convenience and ease of operation
• Oversized base is precision ground with T-slots for added versatility and stability
• Spindle gear box is equipped with steel hardened, ground, shafts and gears
• Spindle gear box is internally lubricated in a continuous oil bath for long term smooth operation
• Tilting table, 45° left and right
• Powerfeed can be disengaged manually
STANDARD EQUIPMENT
• Automatic tool ejector
• Manual quill lock
• Coolant system
• Low voltage at switch
DIRECT DRIVE ROUND COLUMN DRILL PRESSESDRILLING
2360
wiltontool.com
WIL
TO
N D
RIL
LIN
G
102
DRILLING
wiltontool.com
DRILLING
103
WIL
TO
N D
RIL
LIN
G
DIRECT DRIVE ROUND COLUMN DRILL PRESSES
DIRECT DRIVE ROUND COLUMN WITH ELECTRO-MAGNETIC CLUTCH DRILL PRESSES
• Push button control panel
• Power feed gear box fitted with an electro-magnetic clutch for power feed engagement and overload protection
• Heavy duty quill and spindle with manual quill locking
• Tempered, ground spindle with internal taper mounted in precision bearings for maximum accuracy, minimizing deflection
• Speed and feed selectors are located on one side of the drill head for convenience and ease of operation
• Oversized base is precision ground with T-slots for added versatility and stability
• Coolant tank and pump integrated into base
• Spindle gear box is equipped with steel hardened, ground, shafts and gears
• Spindle gear box is internally lubricated in a continuous oil bath for long term smooth operation
STANDARD EQUIPMENT
• Automatic tool ejector
• Manual quill lock
• Coolant system
• Low voltage at switch
STOCK NUMBER 2401/2402* 2404* 2444/2445* 2455/2456* 2475/2476*
Drills to Center of Circle (in.) 28 28 30 33 33
Steel Drilling Capacity (in.) 1-3/8 1-3/4 2 2-3/8 2-3/4
Steel Tapping Capacity (in.) 1-1/2 1-9/16 1-3/4 2 2-1/8
Quill Diameter (in.) 3.228 3.228 3.465 3.465 3.78
Distance Spindle to Column (max./in.) 14 14 15 16-1/2 16-1/2
Number & Range of Spindle Speeds (RPM) 8(112, 160, 245, 358, 532, 762, 1164)
9 (82, 120, 180, 354, 528, 678, 1026, 1524)
9 (55, 98, 156, 198, 346, 456, 576, 822, 1338)
12 (48, 72, 96, 144, 186, 234, 288, 360, 480, 804, 996, 1278)
12 (42, 58, 86, 116, 154, 249, 304, 412, 554, 748, 1098,
1485)
Automatic Feeds (in.) 3 (.004, .007, .010) 4 (.004, .008, .012, .016) 4 (.003, .006, .010, .014) 6 (.002, .004, .006, .008, .014, .020)
6 (.002, .004, .006, .008, .014, .020)
Spindle Travel (in.) 7 9 10 10 11
Spindle Distance to Base (in.) 48 49 50 51 51
Spindle Distance to Table (min./in.) 1.37 2.67 2.75 2.95 2.75
Spindle Distance to Table (max./in.) 30-1/2 30-1/2 30-1/2 30-1/2 30-1/2
Table Size (in.) 22 x 19 22 x 19 33-1/2 x 23-1/2 33-1/2 x 23-1/2 33-1/2 x 23-1/2
T-slot Number & Size (in.) 3 & 1/2 3 & 1/2 3 & 5/8 3 & 5/8 3 & 5/8
Work Table Capacity (lbs.) 575 575 575 750 750
Spindle Taper 4MT 4MT 4MT 5MT 5MT
Motor 2HP, 230/460V, 3PhPrewired 230V
3HP, 230/460V, 3PhPrewired 230V
4HP, 230/460V, 3PhPrewired 230V
5-1/2HP, 230/460V, 3PhPrewired 230V
7-1/2HP, 230/460V, 3PhPrewired 230V
Floor Space Required (in./ L x W x H) 50 x 27 x 98 50 x 27 x 98 53 x 30 x 108 53 x 33 x 109 55 x 33 x 115
Net Weight (lbs.) 1632 1632 2405 2800 2536
* Equipped with Automatic Tapping Control
2455
wiltontool.com
WIL
TO
N D
RIL
LIN
G
102
DRILLING
wiltontool.com
DRILLING
103
WIL
TO
N D
RIL
LIN
G
3' ARM RADIAL DRILL PRESSES
• The power train gears and spline shafts are made of the finest quality, heat treated and ground nickel chrome steel–giving extra strength and smoothness to high torque loads
• The spindle is made of the finest case hardened steel, for extra strength and wear
• The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
• Built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracy
• Arm raising safety device prevents arm from dropping
• Counter balanced mechanism for spindle return
• 6 speeds/3 feed rates make exotic materials easier to drill, bore and tap
• Centralized control center
• Automatic tool ejector
• Independent arm electric clamping system, which locks and unlocks the head and column
• Push button controls are all reduced to 110V
• Electrical circuits are located in the built-in control box at the rear of the arm--this keeps the controls dust-and-humidity-free while making them easily accessible for maintenance
• Entire frame is made of Meehanite and high tensile strength cast iron to handle the heaviest of jobs
STANDARD EQUIPMENT
• Built-in work light
• Coolant pump
• Tool kit
• Box table
3' ARM RADIAL DRILL PRESS
STOCK NUMBER 720R
Steel Drilling Capacity (in.) 1-1/2
Cast Iron Drilling Capacity (in.) 2
Steel Tapping Capacity (in.) 3/4
Cast Iron Tapping Capacity (in.) 1
Steel Boring Capacity (in.) 2-3/4
Cast Iron Boring Capacity (in.) 4
Column Diameter (in.) 8-1/4
Distance from Column to Spindle (max./in.) 29-1/2
Distance from column to spindle center, Min. (in.) 8-5/8
Travel of head (Horizontal) (in.) 20-7/8
Distance from base to spindle end, Max. (in.) 41-3/4
Distance from base to spindle end, Min. (in.) 9-5/8
Travel of arm (Vertical) (in.) 23-13/16
Table Size (in.) 23-5/8 x 17-1/2 x 15
T-slot Number & Size (in) 3 & 3/4
Base Dimensions (in.) 49-5/8 x 25-3/16 x 6-9/32
Spindle Taper 4 MT
Spindle Stroke (in.) 8-1/4
Range of Spindle Speeds (RPM) 6 (88–1500)
Feed Rates (IPR) .002, .004, .006
Motor 3HP, 230/460V, 3Ph, Prewired 230V
Elevating Motor 1HP
Coolant Pump Motor 1/8HP
Machine Height from Floor (max./in.) 85-7/16
Floor Space Required (in./L x W x H) 64 x 32 x 85
Shipping Weight (lbs.) 2970
104
WIL
TO
N D
RIL
LIN
G
DRILLING
wiltontool.com
DRILLING
105
5' ARM RADIAL DRILL PRESS
WIL
TO
N D
RIL
LIN
GSTOCK NUMBER 1100R 1100R-4 1230R 1230R-4
Steel Drilling Capacity (in.) 1-3/4 1-3/4 1-7/8 1-7/8
Cast Iron Drilling Capacity (in.) 2-1/4 2-1/4 2-5/16 2-5/16
Steel Tapping Capacity (in.) 1 1 1 1
Cast Iron Tapping Capacity (in.) 1-1/4 1-1/4 1-1/2 1-1/2
Steel Boring Capacity (in.) 3-3/8 3-3/8 3-3/8 3-3/8
Cast Iron Boring Capacity (in.) 4-3/4 4-3/4 4-3/4 4-3/4
Column Diameter (in.) 10-1/4 10-1/4 11-13/16 11-13/16
Distance from Column to Spindle (max./in.) 43-5/16 43-5/16 46 46
Distance from Column to Spindle (min./in.) 9-5/8 9-5/8 13-3/4 13-3/4
Travel of head (Horizontal) (in.) 33-5/8 33-3/8 35 35
Distance Base to Spindle (max./in.) 50-3/8 50-3/8 54 54
Distance Base to Spindle (min./in.) 12-5/8 12-5/8 19-3/8 19-3/8
Travel of arm (Vertical/in.) 24 24 34-5/8 34-5/8
Table Dimensions (in.) 24-3/4 x 20-1/2 x 16-1/2 24-3/4 x 20-1/2 x 16-1/2 27-7/8 x 20-1/2 x 16-1/2 27-7/8 x 20-1/2 x 16-1/2
T-slot Number & Size (in.) 3 & 3/4 3 & 3/4 3 & 3/4 3 & 3/4
Base Dimensions (in.) 67-3/4 x 28 x 6-1/2 67-3/4 x 28 x 6-1/2 67-3/4 x 28 x 6-1/2 67-3/4 x 28 x 6-1/2
Spindle Taper 4 MT 4MT 4 MT 4 MT
Quill Travel (in.) 9 9 9-7/8 9-7/8
Spindle Travel w/Power Feed Engaged (in.) 4 4 4 4
Spindle Speeds (RPM) 12 (44–1500) 12 (44–1500) 12 (45–1550) 12 (45–1550)
Feed Rates (IPR) 3 (.002, .004, .006) 3 (.002, .004, .006) 3 (.002, .004, .006) 3 (.002, .004, .006)
Motor (2-Speed) (Low & High) 1-1/2 to 3HP, 230V, 3Ph 1-1/2 to 3HP, 460V, 3Ph 2-1/2 to 5HP, 230V, 3Ph 2-1/2 to 5HP, 460V, 3Ph
Elevating Motor 1HP 1HP 1HP 1HP
Coolant Pump Motor 1/8HP 1/8HP 1/8HP 1/8HP
Machine Height from Floor (in.) 100 100 109-1/2 109-1/2
Floor Space Required(in./L x W x H) 74 x 34 x 89 74 x 34 x 39 80 x 39 x 89 80 x 39 x 89
Shipping Weight (lbs.) 4290 4290 4620 4620
4' ARM RADIAL DRILL PRESSES
• Power train gears and spline shafts are made of the finest quality, heat treated and ground nickel chrome steel–giving extra strength and smoothness to high torque loads
• The spindle is made of the finest case hardened steel, for extra strength and wear
• The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
• The spindle is built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracy
• Push button controls are all reduced to 110V
• Electrical circuits are located in the built-in control box at the rear of the arm–this keeps the controls dust and humidity free while making them easily accessible for maintenance
• Entire frame is made of Meehanite and high tensile strength cast iron to handle the heaviest of jobs
• Arm raising safety device prevents arm from dropping
• Counter balanced mechanism for spindle return
• 12 speeds/3 feed rates make exotic materials easier to drill, bore and tap
• Centralized control center
• Automatic tool ejector
• Independent manual arm clamping system, which locks and unlocks the head and column
STANDARD EQUIPMENT
• Built-in work light
• Coolant pump
• Tool kit
• Box table
4' ARM RADIAL DRILL PRESSES
1230R
104
WIL
TO
N D
RIL
LIN
G
DRILLING
wiltontool.com
DRILLING
105
5' ARM RADIAL DRILL PRESSW
ILT
ON
DR
ILL
ING
5' ARM RADIAL DRILL PRESSES
• The power train gears and spline shafts are made of the finest quality, heat treated and ground nickel chrome steel–giving extra strength and smoothness to high torque loads
• The spindle is made of the finest case hardened steel, for extra strength and wear
• The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
• The spindle is built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracy
• Push button controls are all reduced to 110V
• Electrical circuits are located in the built-in control box at the rear of the arm–this keeps the controls dust-and-humidity-free while making them easily accessible for maintenance
• Entire frame is made of Meehanite and high tensile strength cast iron to handle the heaviest of jobs
• Arm raising safety device prevents arm from dropping
• Counter balanced mechanism for spindle return
• 12 speeds/6 feed rates make exotic materials easier to drill, bore and tap
• Centralized control center
• Automatic tool ejector
• Hydraulic head and column clamping
STANDARD EQUIPMENT
• Built-in work light
• Coolant pump
• Tool kit
• Box table
STOCK NUMBER 1600R
Drilling Capacity (in.) 2-1/2
Cast Iron Drilling Capacity (in.) 2-7/8
Steel Tapping Capacity (in.) 2
Cast Iron Tapping Capacity (in.) 2-3/8
Steel Boring Capacity (in.) 5
Cast Iron Boring Capacity (in.) 7-3/8
Column Diameter (in.) 17
Distance from Column to Spindle (max./in.) 63
Distance from Column to Spindle (min./in.) 17
Travel of head (Horizontal) (in.) 49-5/8
Distance Base to Spindle (max./in.) 63
Distance Base to Spindle (min./in.) 13
Travel of arm (Vertical/in.) 50
Table Dimensions (in.) 27-7/8 x 19-5/8 x 15-3/4
T-slot Number & Size (in.) 3 & 7/8
Base Dimensions (in.) 97-5/8 x 41-11/32 x 8-1/4
Spindle Taper 5 MT
Quill Travel (in.) 14-9/16
Spindle Travel w/Power Feed Engaged (in.) 13
Range of Spindle Speeds (RPM) 12 (40–1920)
Feed Rates (IPR) 6 (.003–.038 IPR)
Motor 7-1/2HP, 230/460V, 3Ph, Prewired 230V
Elevating Motor 2HP
Clamping Motor 1HP
Coolant Pump Motor 1/2HP
Machine Height from Floor (in.) 124-58/64
Floor Space Required(in./L x W x H) 116 x 55 x 112
Shipping Weight (lbs.) 11,220
wiltontool.com
WIL
TO
N D
RIL
LIN
G
106
DRILLING
107
WIL
TO
N D
RIL
LIN
G
DRILLING
CAM ACTION DRILL PRESS VISES
• Simple push or pull on the center bar knob sets the jaw in position
• Easy press locking lever cams the jaw ahead 3/32", exerting a holding pressure that is adjustable from 400 to 1100 lbs.
• Base is designed for clear through drilling applications
• Unique top locking lever can be raised or lowered to tighten or loosen against the workpiece
SUPER PRECISION DRILL PRESS VISES
• Rugged design makes these vises perfect for even the most diffi cult of drilling, tapping and reaming operations
• Body made from close grain aged cast iron
• Ground vise bed for smooth and consistent jaw movement
• Jaws are hardened and grounded, with cross patterned 90° V-grooves in the stationary jaw facilitating holding of round pieces both horizontally and vertically
• Hardness of jaws-55+3HRC
VERSATILE DRILL PRESS VISES
• Made from high grade cast iron
• Ground vise bed for smooth, consistent jaw movement
• Hardened top V-groove jaws
• Rugged design and large workload capacity
STANDARD & ANGLE DRILL PRESS VISES
• Precision grinding of sides and front side face permits additional mounting positions for drilling, tapping or reaming
• Combining a smooth moveable jaw plate with a cross-patterned 90° V-groove stationary jaw
• The vise is recommended for general use
DRILL PRESS VISES
STOCK NUMBER
MODEL NUMBER JAW WIDTH (IN.) JAW OPENING
(IN.)JAW DEPTH
(IN.)SHIP WEIGHT
(LBS.)
13400 1203 3 3 1-1/4 10
13401 1204 4 4-11/16 1-5/16 18
13402 1206 6 6-3/16 1-13/16 34
13403 1208 8 8-3/16 2 51
STOCK NUMBER
MODEL NUMBER
JAW WIDTH (IN.)
JAW OPENING (IN.) JAW DEPTH (IN.) SHIP WEIGHT
(LBS.)
11718 DPV/80 3-3/16 3-1/2 1 13
11719 DPV/100 4 4 1-1/4 20
STOCK NUMBER MODEL NUMBER JAW WIDTH
(IN.)JAW OPENING
(IN.) JAW DEPTH (IN.) SHIP WEIGHT (LBS.)
Continuous Nut
63238 1335 3 2-3/4 1-7/8 6
63239 1345 4 4 2-1/8 12
63240 1360 5 5 2-1/8 24
Rapid Acting Nut
63241 1435 3-1/2 4-1/4 1-3/4 11
63242 1445 4-1/2 4-3/4 1-7/8 15
63243 1460 6 6-3/4 2-1/8 28
STOCK NUMBER MODEL NUMBER JAW WIDTH
(IN.) JAW OPENING (IN.) JAW DEPTH (IN.)
SHIP WEIGHT (LBS.)
Standard Models
12800 25 2-1/2 2-9/16 1-1/2 6
12860 30 3 3-1/8 1-3/4 10
Angle Models
12850 25A 2-1/2 2-1/2 1-1/2 12
12870 30A 3-1/8 3-1/8 1-3/4 17
wiltontool.com
WIL
TO
N D
RIL
LIN
G
106
DRILLING
107
WIL
TO
N D
RIL
LIN
GDRILLING
KEYLESS DRILL CHUCKS WITH INTEGRAL SHANK
• Integral shank design eliminates the possiblilty of the chuck slipping on its arbor
• It is ideal for all your drill press and machining center operations
• All parts are precision ground, heat treated and balanced with each one being precision tested to .0019" T.I.R.
STOCK NUMBER CAPACITY (IN.) MALE TAPER WEIGHT (LBS.)
KDC80-MT2 0–5/16 MT-2 1-1/2
KDC130-MT3 0–1/2 MT-3 2-1/2
KDC130-MT4 0–1/2 MT-4 2-3/4
KDC160-MT3 1/8–5/8 MT-3 3-1/2
KDC160-MT4 1/8–5/8 MT-4 4
PRECISION KEYLESS DRILL CHUCKS-TAPPER MOUNTED
• These chucks incorporate a unique self-tightening feature, whick allows them to grip the cutting tool tighter as more torque is applied
• Even when high torque is applied, the chucks can be easily opened by hand
• Extremely high accurachy and precision design make these chucks suitable for use on machining centers, CNC machines and conventional equuipment
• All parts are precision ground, heat treated and balanced with each chuck being precision tested to .0019" T.I.R.
STOCK NUMBER CAPACITY (IN.) TAPER MOUNT WEIGHT (LBS.)
KDC100-JT2 0–3/8 JT2 1-1/2
KDC100-JT33 0–3/8 JT33 1-1/2
KDC130-JT33 0–1/2 JT33 2
KDC130-JT6 0–1/2 JT6 2
KDC160-JT6 1/8–5/8 JT6 2-1/2
KDC160-JT3 1/8–5/8 JT3 2-1/2
STOCK NUMBER CHUCK TAPER SHANK TAPER WEIGHT (OZ.)
DCA2-JT2 JT2 MT-2 5
DCA2-JT33 JT33 MT-2 5
DCA2-JT6 JT6 MT-2 5
DCA2-JT3 JT3 MT-2 7
DCA3-JT33 JT33 MT-3 11
DCA3-JT6 JT6 MT-3 11
DCA3-JT3 JT3 MT-3 12
DCA4-JT6 JT6 MT-4 21
DCA4-JT3 JT3 MT-4 23
ARBORS
• Precision CNC machined and ground arbors provide high accuracy and close tolerance fits
• For best accuracy and fit we recommend mounting Wilton keyless drill chucks on Wilton arbors
DRILLING ACCESSORIES
wiltontool.com
WIL
TO
N D
RIL
LIN
G
108
DRILLING
STOCK NUMBER TAPPING CAPACITY HEAD WEIGHT PACKAGE WEIGHT
WTH25 5/64–1/4 2-1/2 5
WTH50 3/16–7/16 5-1/4 9-3/4
WTH75 5/16–3/4 10 16-1/4
STOCK NUMBER 5104561 5107901
Working Surface (in.) 22-9/16 x 9-7/16 17-23/32 x 9-7/16
Longitudinal Feed (in.) 14-49/64 14-49/64
Crossfeed (in.) 6-1/8 6-1/8
Length of Bedplate (in.) 10-13/64 10-13/64
Width of Bedplate (in.) 9 -7/32 9-7/32
Total Height (in.) 4-1/2 4-1/2
Net Weight (lbs.) 123 165
REVERSIBLE TAPPING HEADS
• Pre-selective torque drive prevents tap breakage
• 1.75: 1 reverse ratio increases productivity
• Self-feed ensures gauge perfect threads
• Re-entry cushion eliminates cross threading
• Right hand tapping only
STANDARD EQUIPMENT
• Tap holder
• Two morse taper arbors
• Two keys
• Brake rod
• Hex wrench
• Packaged in wooden box with latch
STOCK NUMBER DESCRIPTION
5107980 Adapter plate with stud
MILLING TABLES
• Highest quality meehanite castings
• Table and ways precision ground
• Adjustable keys and locks for added rigidity
• Leadscrews supported by axial ball bearings
• Table accuracy on horizontal plane within 0.001"
• Leadscrew accuracy 0.0005"
• 3 T-Slots
ADAPTER PLATE WITH STUD
For use with all WILTON/ARBOGA Gear Head Drill Presses. Fits directly onto the standard table knee. Will not fit ARBOGA Model A4008.
ADAPTER PLATE WITH STUD
Can be used on all WILTONdrill presses with 18" x 25" tables. These adapter plates bolt directly onto Wilton's standard T-slot production table.
STOCK NUMBER DESCRIPTION
5046110 Box Plate Adapter
DRILLING ACCESSORIES