wind energy basics “web ed.2” training · 2019-01-07 · [email protected] 3 othman...
TRANSCRIPT
www.green-energy-academy.com [email protected]
3 Othman Ibn Affan st. off Gizerat Al-Arab, Mohandessin, Giza ,Egypt King AbdulAziz Road, Al Masif Riyadh, Saudi Arabia
GEA GENERAL TRAINING PROFILE | GEA_WEB_R00_11/2018
Knowledge is Power! Accredited & Certified by
Wind Energy Basics “WEB Ed.2” training
3 Days Training Detailed Outlines & Schedule
Date: Month xxth, yyth & zzth (day1- day2- day3)
Duration: 18-20 hours No. of days: 3 days,
Timing: Friday & Saturday: (4 PM to 10:30 PM), Sunday: (4 to 10:30 PM) Language: English or Arabic
DAY 1
xx Month, 2018—Monday
4:00—5:00 Welcome & Introduction
5:00—6:00 Global status of wind energy
6:00—7:00 Introduction to wind energy
7:00—7:30 B R E A K
7:30—8:30 Wind Resources
8:30—9:30 Aerodynamics of Wind Turbine
9:30—10:30 Working principle and efficiency of wind
turbine
DAY 2
yy Month, 2018—Tuesday
4:00—6:00 Mechanical Components of wind turbines
6:00—7:00 Electrical system and control concepts
7:00—7:30 B R E A K
7:30 – 8:30 Electrical system and control concepts (contd.)
8:30—10:30 Planning, energy yield, grid connection
DAY 3
zz Month, 2018—Wednesday
4:00 – 7:00 Securing efficient 20 years operation
7:00 – 7:30 B R E A K
7:30—8:30 Exercises & Energy yield calculations
8:30—10:30 Experiment & Hands-on wind turbine
models
www.green-energy-academy.com [email protected]
3 Othman Ibn Affan st. off Gizerat Al-Arab, Mohandessin, Giza ,Egypt King AbdulAziz Road, Al Masif Riyadh, Saudi Arabia
GEA GENERAL TRAINING PROFILE | GEA_WEB_R00_11/2018
Knowledge is Power! Accredited & Certified by
Training Outlines
1. Introduction and Global Status of Wind Energy
Introduction about the training days and its content
Motivation (benefits of wind energy)
Global wind energy status
2. Introduction to Wind Energy
Physics behind the generation of wind
and its occurrence
Historical development of wind turbines
Types of wind turbines (horizontal and vertical axis), small and large etc.
3. Wind resources measurement and assessment
Wind resources (atmospheric boundary conditions, complex terrains, wind farm
effect, etc.)
Site assessment (site selection, measurement equipment, types of
meteorological masts, etc.)
Energy yield calculation
4. Aerodynamics of wind
The acting forces (Lift and drag forces)
Basic blade design
Influences on the aerodynamic performances
5. Working principle and efficiency of wind
turbine
Wind energy and wind power
Overall turbine efficiency
6. Mechanical Components
Wind turbine components (small and big
size wind turbines)
Rotor
Drive train
Support structure 7. Electrical system and control concepts
Grid connected and off-grid wind power
Types of control strategies
8. Planning, energy yield, grid connection
Phases of wind energy project
development
Energy yield assessment
Grid connection of wind turbines 9. Securing efficient 20 years operation
Good operation and maintenance
Reasons for failure of turbines
Operation and maintenance
management
Condition monitoring system
10. Hands-on & practical
Experiment using wind turbines kits to
demonstrate the operation of a wind turbine.
Pitch (angle setting) of turbine blades and find out the optimum number of
blades for generating electricity.
Measuring RPM and other electrical parameters through using energy
monitors/loggers software on PCs
www.green-energy-academy.com [email protected]
3 Othman Ibn Affan st. off Gizerat Al-Arab, Mohandessin, Giza ,Egypt King AbdulAziz Road, Al Masif Riyadh, Saudi Arabia
GEA GENERAL TRAINING PROFILE | GEA_WEB_R00_11/2018
Knowledge is Power! Accredited & Certified by
Tools
Wind turbine with 3-blades, rotor and generator.
Multi meter to take current & voltage readings.
Hands-on Exercises
Variable load experiment through changing load and wind speed values.
Excel sheet to calculate wind energy yield.
Weibull distribution calculations and power curve plotting
Tools & Hands-on Exercises
Training Outcomes
Accredited certificate of attendance by the SRH University of Applied Sciences Berlin.
Full understating of wind turbine components, theory of operation, control and grid connection
Development of wind measurement campaign
Understand the aerodynamics of wind turbines as well as control strategies
Calculate the annual energy yield, choose the suitable wind turbine and suitable wind farm sites
Understand electric load variations and relation between load and wind speed
The training qualifies the trainees to attend the next training in the series Wind Energy Advanced
www.green-energy-academy.com [email protected]
3 Othman Ibn Affan st. off Gizerat Al-Arab, Mohandessin, Giza ,Egypt King AbdulAziz Road, Al Masif Riyadh, Saudi Arabia
GEA GENERAL TRAINING PROFILE | GEA_WEB_R00_11/2018
Knowledge is Power! Accredited & Certified by
German expert trainer, MSc. University of Kassel, PhD. & Scientific Researcher at the Oldenburg University.
8 years of experience in international project and construction management, wind energy consulting and engineering
4 years of experience in wind energy research and conducting experiments in wind tunnel
Over 6 years of working experience in several countries such as Germany, DPRK, Lebanon, Saudi Arabia, Morocco, Mongolia and Indonesia
Design and Optimization of testing facility for small wind turbines following IEC 61400-2 standard
Supervision of wind measurement systems installation on meteorological masts
Quality Management Systems
Project & construction management
Wind Energy Training in international environments and Tutorial courses for international master program at Oldenburg University
About the Trainer
www.green-energy-academy.com [email protected]
3 Othman Ibn Affan st. off Gizerat Al-Arab, Mohandessin, Giza ,Egypt King AbdulAziz Road, Al Masif Riyadh, Saudi Arabia
GEA GENERAL TRAINING PROFILE | GEA_WEB_R00_11/2018
Knowledge is Power! Accredited & Certified by
Training References
1st Wind Energy Basics WEB training in Riyadh, Saudi Arabia,
September 2018
Our first WEB training in Riyadh was quite successful and had much
recognition being the first wind energy training ever in Saudi Arabia and the gulf region. Most of our trainees were so pleased with the new and exciting
experience they got from our professional trainer Karim. The training had
insights on the wind energy status in Saudi Arabia and had the target to qualify passionate electrical, mechanical and civil engineers and project managers to
the promising such promising field in Saudi Arabia. Trainees did many
operation and control experiments using realistic wind turbines and understood the effects of variations on different electrical parameters.
No. of trainees: 9
Training duration: 3 days, daily from 3:00 PM to 9:00 PM
www.green-energy-academy.com [email protected]
3 Othman Ibn Affan st. off Gizerat Al-Arab, Mohandessin, Giza ,Egypt King AbdulAziz Road, Al Masif Riyadh, Saudi Arabia
GEA GENERAL TRAINING PROFILE | GEA_WEB_R00_11/2018
Knowledge is Power! Accredited & Certified by
Morocco Summer School, Wind Energy Training, 2017
This training was conducted for Summer School participants in Tetouan, Morocco, where PhD and master students from the field of renewable energy sector took
place and improved their technical, business and networking skills.
No. of trainees: 17
Training duration: 3 days, daily from 9:00 AM to 5:00 PM
Design and Optimizing of Testing Facility Training in Pyongyang, October 2013
The aim of the training is to guide the technical team to optimize their
production line and their design for the manufacturing of a small wind turbine.
The training included testing procedures for different parts of the small turbine according to international standards.
No. of trainees: 10
Training duration: 1 week
SRH University Berlin, Wind Energy Training, 2018
This training was conducted at the SRH University Berlin. Master students from the field of renewable energy attended. The aim of this
training is to achieve learning objective in several aspects of wind
energy. They were introduced to wind energy resource assessment methods, aerodynamics acting on the wind turbine and passing through
control strategies as well project development.
No. of trainees: 9
Training duration: 2 days, daily from 10:00 AM to 5:00 PM