wind speed long range sensor wireless rain wind speed wss...
TRANSCRIPT
Wind Speed Switch
WS 102Wind Speed Sensor WSS 100/4-20 mA
TECHNICAL DATA________________________________________Wind speed measurement range: 0,8 ... 50,0 m/s________________________________________Operating voltage: 9...30 V DC ________________________________________Signal output: 4...20 mA, 2 wire 4 mA = 0 m/s, 20 mA = 50 m/s________________________________________Output averaging period: 1 s ________________________________________Resolution: 0,1 m/s________________________________________Loop resistance: max. 600Ω /24V________________________________________Reverse polarity protection: YES________________________________________Transient voltage protection: YES________________________________________Temperature Operating Range: -30 ... +60 °C________________________________________Relative Humidity: 0 .... 100%________________________________________Accuracy: +/- 3 % ________________________________________Cable: 2 x 0,34 mm2; 5 m standard________________________________________Bearings: 2 x precision stainless steel Ball bearing ________________________________________Material housing: Anodized Aluminum vane: PA________________________________________Mounting : the sensor mounts on a pipe with ø 20 mm outside diametre ________________________________________OPTIONS: Wind tunel certificated version available
WIRING
DIMENSIONS
OUTPUT
NAVIS elektronika E-mail: [email protected]
www.navis-elektronika.com, www.navis-anemometers.com
- relay output- relay switch at exceed wind speed alarm limit- adjustable alarm limit- adjustable alarm ON and OFF delays- no need for external controller- replaceable anemometer cups- stainless steel ball bearing
NAVIS elektronika E-mail: [email protected]
www.navis-elektronika.com, www.navis-anemometers.com
TECHNICAL DATA
Operating voltage: 12 V DC (option 24 V DC)Current consumption: 30 mA Alarm setting range: 1 - 60 m/s Setting of alarm level: with magnetic key in 1 m/s stepsSetting of alarm ON delay: with magnetic key in 12 steps, 0 - 60 min Setting of alarm OFF delay: with magnetic key in 12 steps, 0 - 5h Measurement averaging period: 3 secondsRelay contact rating: 1A/12V DC; 1A/24V DC Temperature Operating Range: -35 to +60 °CAccuracy: +/- 4 % Sensor type: reed contact Reverse polarity protection: YESTransient voltage protection: YESCable: 4 x 0,25 mm2; 5 m standardBearings: 2 x precision stainless steel Ball bearing Material: housing: anodized Aluminum cups: Poliamide, PAMounting : the sensor mounts on a pipe with ø20 mm outside diameter
Long range wireless rain
meter / logger RL 10
FEATURES
- displays rainfall and store data to SD card- long range – up to 400 m (up to 3 km with yagi antennas)- up to 5 years transmitter battery life (user replaceable)- portable receiver unit- suitable for any tipping-bucket rain gauge- graphical display
NAVIS elektronika E-mail: [email protected]
www.navis-elektronika.com, www.navis-anemometers.com
FUNCTIONS
It shows:
- total rainfall since reset- hourly rainfall for last 24 hours- daily rainfall for last 7 days- weekly rainfall for last 6 weeks- monthly rainfall for last 12 months- weekly rainfall graph
It store to SD card:
- rainfall record within selected time interval (1min, 10min or 1h), event mode- each data has date and time stamp
Rl10 wireless rain logger is designed for remote metering and logging of the rainfall. It can be used with any standard tipping-bucket rain gauge with a reed switch output. It consists from transmitter on which the tipping bucket connects and receiver with large graphical LCD display. Transmitter counts tips and transmit data to the receiver where they are processed, displayed and stored to memory card. Beside storing data to memory card receiver also calculate and shows hourly, daily, weekly and monthly rainfall data. Data are recorded in .txt format, with a real time stamp that can be viewed as tabular data or exported into spreadsheets to produce detailed graphs and further data analysis.
range up to400 mFEATURES DIMENSIONS
WIRING
WS 102/12 (12V Power Supply) WS 102/24 (24V Power Supply)
MODELS
Wind Speed Sensor WSS 100/4-20 mA
TECHNICAL DATA________________________________________Wind speed measurement range: 0,8 ... 50,0 m/s________________________________________Operating voltage: 9...30 V DC ________________________________________Signal output: 4...20 mA, 2 wire 4 mA = 0 m/s, 20 mA = 50 m/s________________________________________Output averaging period: 1 s ________________________________________Resolution: 0,1 m/s________________________________________Loop resistance: max. 600Ω /24V________________________________________Reverse polarity protection: YES________________________________________Transient voltage protection: YES________________________________________Temperature Operating Range: -30 ... +60 °C________________________________________Relative Humidity: 0 .... 100%________________________________________Accuracy: +/- 3 % ________________________________________Cable: 2 x 0,34 mm2; 5 m standard________________________________________Bearings: 2 x precision stainless steel Ball bearing ________________________________________Material housing: Anodized Aluminum vane: PA________________________________________Mounting : the sensor mounts on a pipe with ø 20 mm outside diametre ________________________________________OPTIONS: Wind tunel certificated version available
WIRING
DIMENSIONS
OUTPUT
NAVIS elektronika E-mail: [email protected]
www.navis-elektronika.com, www.navis-anemometers.com
WHITERELAY CONTACT
RELAY CONTACT
BROWN
GREEN
YELLOWNAVIS
BELARELE KONTAKT
RELE KONTAKT
RJAVA
ZELENA
RUMENANAVIS