wind turbine nacelle datasheet pack eng (1)
TRANSCRIPT
-
Wind Turbine NacelleDatasheet Pack
Issue Number: 02Issue Date: 10/12/2009
Wind Turbine Nacelle Datasheet Pack
-
0500
1250
2000
3500
4250
5000
5750
250
2750
6070mm - Total Length
2910 2250 910
360.0360.0360.0360.0AB CD
System RailStop AssemblyPartNo: 180-258-001
M10 Tamper Proof Stop AssemblyPartNo: 180-258-000
Moulded Rail EndPartNo: 182-430-000
03
Unirail Carriage Assembly WTPartNo: 240-669-600
Concealed Fix Anchor Tapped WTPartNo: 240-258-200
Unirail - 2910mmPartNo: 242-258-000
Unirail - 910mmPartNo: 242-258-001
Rail Joint Anchor Assembly WTPartNo: 240-669-500
Unirail - 2250mmPartNo: 242-258-002
T Point Anchor Assembly WTPartNo: 240-166-500
03 New Moulded Rail End Detail Updated 27/11/2009 JB
02 New Drawing Sheet, Changed Rail Lengths and Fixing Points 21/05/2009 JB
01 Updated Drawing 17/09/2008 JB
REV. REVISION DESCRIPTION DATE NAME
REVISION TABLE
Drawn By
Checked By
APPR
DATEPART NO
A3
DESCRIPTION
FILE NAMENAME
ALL DIMENSIONS ARE IN MILLIMETRES
GENERAL TOLERANCE +/-
RELEASE LEVELP = PRE-SERIES S = SERIES S
MATERIAL :
FINISH :
WEIGHT (g) :
Unirail System - A
240-669-604
Unirail System - AJB
N/A
N/A
N/ARH
SL
t: +44(0) 1527 548000f: +44(0) 1527 591000
MANUFACTURERS SHOULD CHECK THAT THE PART NUMBER AND REVISION NUMBER CORRESPONDS EXACTLY TO THE INFORMATION DETAILED ON THE UNILINE PURCHASE ORDER
DRAWN WITH REFERENCE TO BS8888IF IN DOUBT ASK!
DO NOT SCALE
PROJECTION
5a Merse RoadNorth Moons MoatRedditchWorcestershireB98 9HLUK
CopyrightUniline Safety Systems Ltd
1 2 3 4 5 6
B
D
A
C
SCALE N/A
15/04/2008
Form 066a (v2 DCN 192)
15/04/2008
15/04/2008 SHEET 1 OF 1
ANGULAR TOLERANCE +/- N/A
N/A
-
250
0
500
1250
2000
2750
3500
3820mm - Total Rail Length
2910 910
360.0
360.0280.0
280.0
360.0
C
DE
F
H
Moulded Rail EndPartNo: 182-430-000
M10 Tamper Proof Stop AssemblyPartNo: 180-258-000
System RailStop AssemblyPartNo: 180-258-001
04 Unirail Carriage Assembly WTPartNo: 240-669-600
Concealed Fix Anchor Tapped WTPartNo: 240-258-200
Unirail - 2910mmPartNo: 242-258-000
Unirail - 910mmPartNo: 242-258-001
Rail Joint Anchor Assembly WTPartNo: 240-669-500
T Point Anchor Assembly WTPartNo: 240-166-500
04 New Moulded Rail End Detail Updated 27/11/2009 JB
03 Additional Detail Added 12/08/2009 JB
02 New Drawing Sheet, Changed Rail Lengths and Fixing Points 21/05/2009 JB
01 Updated Drawing 17/09/2008 JB
REV. REVISION DESCRIPTION DATE NAME
REVISION TABLE
Drawn By
Checked By
APPR
DATEPART NO
A3
DESCRIPTION
FILE NAMENAME
ALL DIMENSIONS ARE IN MILLIMETRES
GENERAL TOLERANCE +/-
RELEASE LEVELP = PRE-SERIES S = SERIES S
MATERIAL :
FINISH :
WEIGHT (g) :
Unirail System - B
240-669-602
Unirail System - BJB
N/A
N/A
N/ARH
SL
t: +44(0) 1527 548000f: +44(0) 1527 591000
MANUFACTURERS SHOULD CHECK THAT THE PART NUMBER AND REVISION NUMBER CORRESPONDS EXACTLY TO THE INFORMATION DETAILED ON THE UNILINE PURCHASE ORDER
DRAWN WITH REFERENCE TO BS8888IF IN DOUBT ASK!
DO NOT SCALE
PROJECTION
5a Merse RoadNorth Moons MoatRedditchWorcestershireB98 9HLUK
CopyrightUniline Safety Systems Ltd
1 2 3 4 5 6
B
D
A
C
SCALE N/A
15/04/2008
Form 066a (v2 DCN 192)
15/04/2008
15/04/2008 SHEET 1 OF 1
ANGULAR TOLERANCE +/- N/A
N/A
-
23
1
220
220
220220220
220
BC
DE G
I6
85
710
4 9
Unirail System - A Part No: 240-669-604
Issue Number: 03Issue Date: 26/11/2009
Notes:Rail joints to be assembled and checked on the gauge.Refer to packaging instructions.
ITEM NO.
PART NUMBER DESCRIPTION QTY.
QTY. PICKED GRN
1 242-258-000 Unirail - 2910mm 22 242-258-001 Unirail - 910mm 23 242-258-002 Unirail - 2250mm 24 240-669-500 Rail Joint Anchor Assembly WT 45 240-258-200 Concealed Fix Anchor Tapped WT 146 180-258-000 M10 Tamper Proof Stop Assembly 47 180-258-001 System Rail Stop Assembly 48 240-669-600 Unirail Carriage Assembly WT 49 240-166-500 T Point Anchor Assembly WT 2
10 182-430-000 Moulded Rail End 4
Name:
Date:
Sheet 1 of 1
Batch Number AllocatedQuantity Assembled
Form 066(v3 DCN 149) - Assembly Inspection Sheet
-
12
22022022
0
220
220
220
ABC
D
EF7
3
8
5
4
9
6
Unirail System - B Part No: 240-669-602
Issue Number: 03Issue Date: 27/11/2009
Notes:Rail joints to be assembled and checked on the gauge.Refer to packaging instructions.
ITEM NO. PART NUMBER DESCRIPTION QTY.
QTY. PICKED GRN
1 242-258-000 Unirail - 2910mm 22 242-258-001 Unirail - 910mm 23 240-669-500 Rail Joint Anchor Assembly WT 24 180-258-001 System Rail Stop Assembly 45 180-258-000 M10 Tamper Proof Stop Assembly 46 240-166-500 T Point Anchor Assembly WT 67 240-669-600 Unirail Carriage Assembly WT 48 240-258-200 Concealed Fix Anchor Tapped WT 10
9 182-430-000 Moulded Rail End 4
Name:
Date:
Sheet 1 of 1
Batch Number AllocatedQuantity Assembled
Form 066(v3 DCN 149) - Assembly Inspection Sheet
-
Issue Number: 06Issue Date : 11/08/2009
Technical Datasheet: 1020
www.unilinesafety.com
Typical Anchor Point Fixing Detail(240-166-500)
Typical Rail Fixing Detail(240-258-200/240-669-500)
Sheet 1 of 2
-
C C
M12 SS A470 Hex Nut
Seal
Concealed Fix Bracket
Roof Sheet
M12 Nylon Dubo Ring
M12 SS A470 Countersunk Hex Bolt
Steel Section
M12 SS A470 Hex Nut
M12 Nylon Dubo Ring
BackplateRoof Sheet
M12 SS A470 Hex Bolt
Steel Section
Seal
M12 Nylon Dubo Ring
Technical Datasheet: 1020Typical Rail Fixing Detail(240-258-200/240-669-500)
Issue Date : 11/08/2009 Issue Number: 06
Typical Anchor Point Fixing Detail(240-166-500)
www.unilinesafety.com Sheet 2 of 2
-
Page 1 of 1
Material Aluminium 6082 T6
Finish Anodised Silver AA25*
Quality 100% Visual Inspection
Strength 22kN Minimum
Conformity EN795 Class D. Tested to BS EN 50308:2004 & OSHA 1915.159/1926.502
Unirail
Issue Date: 12/08/2009 Issue No: 05
Component Specification
Application Rail forms the basis of the anchorage system and allows the Unirail carriage to run unhindered along the system. It can be used as part of a wall/floor/overhead mounted system.
Technical Datasheet No: 1034
* Other finishes available on request
-
Page 1 of 1
A Parking Device
Carriage Body Wheels Fixings
Material Aluminium 6082 T6 Aluminium 6082 T6 316 Stainless Steel
Finish Powder Coated Yellow RAL 1016* Nylon Coated Black Electropolished
Quality 100% Visual Inspection
Strength 22kN
Conformity EN 795 Class D. CE Marked. Tested to BS EN 50308 & OSHA 1915.159/1926.502
Unirail Carriage Assembly WT
Issue Date: 30/11/2009 Issue No: 06
Part No: 240-669-600
Component Specification
Application The carriage is part of the Unirail system. It provides a mobile attachment point for users to connect to. One user per carriage.
Technical Datasheet No: 1033
*Other finishes available on request
-
Page 1 of 1
A M12 SS A470 Hex Bolt # *
B Anchor (Free to rotate)
C M16 SS A470 Hex Nut (Captive)
D Seal Pad
E M16 SS & PTFE Washers
F Backplate
G M12 Nylon Dubo Ring #
H M12 SS A470 Hex Nut #
Anchor Plate Fixings
Material 316 Stainless Steel 316 Stainless Steel / PTFE
Finish Powder Coated Yellow RAL 1016~ Electropolished Self Colour
Quality 100% Visual Inspection
Strength 44kN
Conformity EN795 Class A1, BS EN 50308:2004 & OSHA 1915.159/1926.502
T Point Anchor Assembly
Issue Date: 12/08/2009 Issue No: 05
Part No: 240-166-500
Component Specification
Application To be used as a single attachment point for fall arrest or fall restraint.
Technical Datasheet No: 1024
~Other finishes available on request
# Alternative structural fixings are available on request
-
Page 1 of 1
A M10 SS A470 Countersunk Hex Screw
To prevent the rail from sliding out of an end anchorage as a result of the forces generated by a fall. The system rail stop allows the rail to move in either direction when the rail expands/contracts due to variations in temperature.
System Rail Stop Body Fixings
Material Aluminium 6082 T6 316 Stainless Steel
Finish Anodised Silver AA25 Natural
Quality 100% Visual Inspection
Approvals EN795 Class D. CE Marked. Tested to BS EN 50308 & OSHA 1915.502
System Rail Stop Assembly
Issue Date: 03/02/2009 Issue No: 05
Part No: 180-258-001
Component Specification
Application
Technical Datasheet No: 203
-
Page 1 of 1
Moulded Rail End Material Injection Moulded Polypropylene Finish Spark Eroded Texture Quality ISO 9001:2000 Weight 9g
Use the Moulded Rail End when finishing the rail system, thus preventing water ingress inside the extrusion. The component also protects the user from collision with the ends of the rail system.
A Mould Rail End B Unirail 3m
Moulded Rail End
Issue Date: 06/11/2009 Issue No: 05
Part No: 182-430-000
Application
Technical Datasheet No: 200
Component Specification
-
Page 1 of 1
A Carriage Buffer B M10 SS A470 Button Socket Head Machine Screw C M10 SS A470 Flat Washer D M10 Nylon Washer
Body Carriage Buffer Fixings Material Aluminium 6082 T6 Rubber 316 Stainless Steel/Nylon Finish Anodised Silver AA25 (1 thou) Natural Natural Weight 89g (3.14oz) Quality ISO 9001:2000
M10 Tamper Proof Stop Assembly
Issue Date: 04/08/2009 Issue No: 05
Part No: 180-258-000
Component Specification
Application
Technical Datasheet No: 1026
To prevent the carriage from coming off the rail.
-
Page 1 of 1
A M10 SS A470 Countersunk Hex Screw
B Spigot Bar
C Seal Pad
D M12 SS A470 Countersunk Hex Screw # *
E M12 Nylon Dubo Ring
F M12 SS A470 Hex Nut
Concealed Fix Joint Body Spigot Fixings
Material Aluminium 6082 T6 Aluminium 6082 T6 316 Stainless Steel/Nylon
Finish Anodised Silver AA25~ Anodised Silver AA25 Natural
Quality 100% Visual Inspection
Strength 22kN
Conformity EN795 Class D. CE Marked. Tested to BS EN 50308 & OSHA 1915.159/1926.502
Rail Joint Anchor Assembly WT
Issue Date: 12/08/2009 Issue No:04
Part No: 240-669-500
Component Specification
Application Used to join two rails together and anchor to the structure in overhead or horizontal Unirail Systems.
Technical Datasheet No: 1030
~Other finishes available on request
* Sealed and fixed with Loctite Thread Locker # Alternative structural fixings available on request
-
Page 1 of 1
# Alternative structural fixings available on request. * Sealed and fixed with Loctite Thread Locker
A Seal Pad
B M12 Nylon Dubo Ring #
C M12 SS A470 Hex Nut #
D M12 SS A470 Countersunk Hex Screw # *
Anchor Body Fixings
Material Aluminium 6082 T6 316 Stainless Steel / Nylon
Finish Anodised Silver AA25~ Natural
Quality 100% Visual Inspection
Strength 22kN
Conformity EN795 Class D. CE Marked. Tested to BS EN 50308 & OSHA 1915.159/1926.502
Concealed Fix Anchor Tapped WT
Issue Date: 12/08/2009 Issue No: 05
Part No: 240-258-200
Component Specification
Application For fixing the rail system to the structure in overhead and horizontal systems for fall restraint or fall arrest.
Technical Datasheet No: 1032
~Other finishes available on request
-
UK5a Merse Road
North Moons Moat Redditch, Worcestershire
B98 9HL
t: +44 (0) 1527 548 000 f: +44 (0) 1527 591 000
USA17200 Chenal Parkway
Suite #352 Little Rock, AR 72223
USA
t: +01 (501) 517 6056 f: +01 (501) 325 3477
AUSTRALIAFactory 1
4 Reichert Drive, Molendinar Queensland 4214
Australia
t: +61 (7) 5563 1900 f: +61 (7) 5571 7093
www.unilinesafety.com
because lives depend on it
Uniline Safety Systems Limited
Uniline Safety Systems is a leading international manufacturer of fall protection products and systems. Through a combination of expert knowledge and practical experience, we can help our customers reduce risk and increase safety when working at height.
Unilines comprehensive range of products offers fully compliant, practical solutions for structures of all types, in all industries. Our ethos of delivering quality, service, training and support for our
customers has earned Uniline a deserved reputation for excellence around the world.
Operating through specialist safety companies in over 25 countries, Uniline provides local support and installation services to meet the specific safety objectives of all our customers.
local distributor/systems integrator
A range of intuitive rescue and access products to aid recovery of workers after a fall or in an emergency at height. The diversity of Unilines Rescue range ensures we can provide a solution for all types of rescue situations whilst keeping safety the top priority.
MultiSafe comprises three of the best known brands in fall protection safety: Uni-8, Uni-16, and UniRail. The versatility of these products combined with Unilines expertise in fall protection ensures we can solve even the most complex of height safety problems in industry, construction, faade access and for all manner of building maintenance and inspection tasks.
If you need a safety solution for roof access during maintenance and inspection tasks, then look no further than Unilines RoofSafe product range. Our products, including roof anchors, horizontal lifelines & horizontal rail systems offer comprehensive protection for workers on all types of roofs.
The best vertical fall protection systems in the world wont let you down. The extensive development of the EasyClimber range of products for vertical structures including masts, towers, pylons, wind turbines, silos, bridges and chimney stacks ensures customers will enjoy the safest and most functional climbing experience possible.
Gamesa Front Page.pdfUnirail System - STD LT G8XModelDrawing View1Drawing View2Drawing View3Detail View A (1 : 5)Detail View B (1 : 5)Detail View C (1 : 5)Detail View D (1 : 5)
Unirail System - HT G8XModelDrawing View1Drawing View3Drawing View4Detail View C (1 : 5)Detail View D (1 : 5)Detail View E (1 : 4)Detail View H (1 : 5)
AIS - Unirail System - STD LT G8XSheet1Drawing View1Drawing View2Detail View B (1 : 7)Detail View C (1 : 7)Detail View D (1 : 7)Detail View E (1 : 7)Detail View G (1 : 7)Detail View I (1 : 7)
AIS - Unirail System - HT G8XSheet1Drawing View1Drawing View2Detail View A (1 : 7)Detail View B (1 : 7)Detail View C (1 : 7)Detail View D (1 : 7)Detail View E (1 : 7)Detail View F (1 : 7)
Fixing DetailSheet2Drawing View14Drawing View15
Sheet1Drawing View5Section View C-CDrawing View11Section View -
UnirailUnirail Carriage Assembly WTT Point Anchor AssemblySystem Rail Stop AssemblyMoulded Rail EndM10 Tamper Proof Stop AssemblyRail Joint Anchor Assembly WTConcealed Fix Anchor Tapped WT3235 LV Uniline Digital Covers