window closing devices

An ASSA ABLOY Group company

IMPER

VIOUSNESS

PERFORMANCE

ENDURANC

E

2

CHARACTERISTICS

•Our fittings are suitable for traditional outward projec-ting window profiles, structural glazing and semi-structu-ral glazing profiles.

•The single point locking system is ensured by means of following handles :VECALU lever closer,, LAG and BAG.

•The multi-point locking system ensures 2 or 4 lockingpoints (or more) with only one central handle : internalmechanism VECTRALE or “CE”” Cremone Bolt combinedwith multi-point fitting.

•A multi-point locking is recommended for windows with awidth up to 1500mm.

AASS AA SSPPEECCIIAALLIISSTT MMAANNUUFFAACCTTUURREERR

OOFF WWIINNDDOOWW AACCCCEESSSSOORRIIEESS FFOORR

TTOOPP--HHUUNNGG OOUUTTWWAARRDD PPRROOJJEECCTTIINNGG

WWIINNDDOOWWSS,, RRIIVVAALLUU OOFFFFEERRSS

YYOOUU AA CCOOMMPPLLEETTEE RRAANNGGEE OOFF

SSOOLLUUTTIIOONNSS FFOORR TTHHEE CCLLOOSSIINNGG OOFF

YYOOUURR WWIINNDDOOWW

These single or multi-point locking systems meet the strictestrequirements for both air and watertightness on any window size.

Our handles offer you a large rangeof designs and colours.

These fittings are complementary toITALINOX friction hinges

CLOSING DEVICES

Skill in locking3

Vecalu

4

Vecalu

CHARACTERISTICS

•Suited to structural glazing and semi-structural glazing profiles.

•Progressive locking provided by a stainless steel latch and a polyamideturn roller of 10mm diameter on an aluminium anodized keeper.

•3 different models of roll lever closerand 2 models of keepers are availableaccording to the thickness of sash profile and chamber.

•Roll lever closers with left or right operating way.

•Concealed fixing of keeper and VECALU handle.

•Natural anodized or coated finish.

Lever Closers

CLOSING DEVICESSingle Point locking

Lever Closers

5

LAG 208

BAG OPALE 258

GT8GA11

CHARACTERISTICS

•Suited to traditional outward window profiles,structural glazing and semi- structural glazing profiles.

•Progressive locking provided by a polyamide turnroller and an aluminium or polyamide roundedkeeper.

•Combinations possible with 3 models of handleson 4 backplate types adapted to different sashprofiles.

•Handle with left or right operating way.

•Concealed or visible fixing of the keeper.

•Natural anodized or coated finish (OPALE modelis not available in anodized version).

BAG 307

BAG 310

6PARAPHEREF 7206

REF 6805

CHARACTERISTICS

•Suited to structural glazing and semi-structural glazing profiles.

•Invisible internal mechanism – only thehandle is visible.

•Reduced space required within the profilechamber.

•Indexed quarter turn operation.

•Bi-directional operation.

•Concealed fixing.

•Use handle alone with VECTRALE mechanism with spindle ref.6805.

•Use handle on backplate with VECTRALEmechanism without spindle ref.6815.

•5 different models of handles available(with or without backplate).

•Complementary to our fittings with turnroller or adjustable roller.

•Coated finish - note that PARAPHE andBERCY models are also available in satinsilver anodized finish.

BERCYREF 7205

Vectrale Mechanism with spindleVectrale Mechanism with spindle

CLOSING DEVICES

7

Multi-point locking

The handles are available on

backplate in order tobe fitted with the

VECTRALE mechanismwithout spindle

ref.6815.

OPALEREF 9088

BORÉALEREF 9748

REF 6815

ESTIVALEOffset handle REF 9068

Vectrale Mechanism without spindle

Vectrale Mechanism without spindle

PARAPHE

8

“CE” CREMONE BOLT“CE” CREMONE BOLT

CHARACTERISTICS

•Suited to traditional outward projecting window profiles, structural glazing and semi-structural glazing profiles.

•Above or front fixing.

•Indexed quarter turn operation.

•Bi-directional operation.

•Concealed fixing.

•4 different handle models and one version with square socket.

•Offset handle ESTIVALE available either in leftor right operating way.

•Complementary to our fittings with turn rolleror adjustable roller.

•Coated finish – note that PARAPHE and BERCYmodels are also available in satin silver anodized finish.

OPALE

CLOSING DEVICESMulti-point locking

9

OPALE

BERCY

ESTIVALE

HANDLE WITH SQUARESOCKET

10

DRIVER

CORNERGEARREF 3225

KEEPERREF 3561

ADJUSTABLE ROLLER SOCKET

REF 3367TURN ROLLERREF 5223

REF 5586

REF 3397

FittingsMulti-point lockingFittings

CHARACTERISTICS

•2 to 4 locking point fitting, made of zamak.

•Suitable for 15 x 20 window sash groove.

•Available with adjustable roller or turn roller.

•2 models of drivers available allowing both above andfront fixing of the “CE” cremone bolt.

•Corner gear implementation by means of a stainlesssteel pin.

•Progressive locking operation thanks to a ramp-keeper.

•White zinc plated finish.

CLOSING DEVICES

11

SPACER SET

AdditionalAccessoriesAdditional

Accessories

RETAINER ARM

STRENGTHENINGSETREF 5249

2 models adapted

to 16 mm chamber(ref.7352)

or 21 mm chamber(ref.7176).

Provides one lockingpoint at the level of the

upper crossbar. The number and

position depends on the window

width and the desiredAir-Water-Wind

performance.

Retainer arm releasable either by hand(ref. 5901) or with an hexagonal wrench (ref 5900).Suitable for 16 or 21 mm chambers.Adjustable brake located into a stainless steel slide.

Left operating way

Right operating way

12

VecaluVecalu

2 holes Ø5.3

2 holes Ø3.4

59 x 11

4832 x 11

30

17.5

21

7.5

10

A

B

C

CHOICE OF MODELSChoice of models depends on dimensions “A” and “C”. Please refer to the table opposite.

MAINTENANCEEach year check and ensure all fixings are suitably tightened and lubricated as required.

13

32 to 35

-

-

-

35 to 39

-

-

-

33 to 38

-

-

-

38 to 41

-

-

-

Chamber A =16 mm Chamber A =21 mm

28 to 32

-

-

-

++ ++++

+ +

++

Dimension C (mm)

VECALU I 28 (B = 25 mm)

VECALU I 33 (B = 28,5 mm)

VECALU I 38 (B = 32 mm)

GV 16 Keeper

GV 21 Keeper

CLOSING DEVICES

164

150

30 17.5 13.5

30

38

11

11

REF GV16

REF GV21

14

FIXING FLANGE 307shown here with OPALE handle (BAG)

Roll lever closersRoll lever closers

FIXING FLANGE 310shown here with GOLF handle (BAG)

FIXING FLANGE 208 OR 258shown here with profiled handle (LAG)

60

43

60

4830

60

4030

8

D

A

11 M

AX.

20 o

r 25

830

20

DA

11 M

AX.

9.819

11

830

20

D

A

11 M

AX.

6.8

1,5

26.5

11

CLOSING DEVICES

15

CHOICE OF MODELSDimensions “A” and “B” have to be specifiedwhen ordering.For choice of fixing flanges, handles and keepersplease revert to the table below.

MAINTENANCE- Each year check and ensure all fixings are suitably tightened and lubricated as required.

258

-

-

307 310

CHOICE OF FIXING FLANGES ACCORDING TO HANDLE MODELS

208

-BAG OPALE

BAG GOLF

LAG

Handle models

GN 8

Nylon*

8

GN 11

Nylon*

11

GA 8

Aluminium

8

GA 11

Aluminium

11

GT 8

Aluminium

8

GT 11

Aluminium

11

CHOICE OF KEEPERS

Keeper model

Material

Dimension B ( mm )

* Grey or black Nylon

B

B

22

60

43

22

60

43

+++ + +

+ +++

REF GT

REF GA / GN

16

WARNINGTo ensure flush fit of the tapped rivets it is necessary to trim back the 6.2mm diameter holes (chamfer 0.2mm to 0.3mm).

Vectrale mechanism with spindle ref. 6805 is suited to window sashprofiles of 12mm to 19mm thickness.More references are also available forwindow sash profiles up to 31 mm.Please contact us.VECTRALE mechanism is directlyconnected to sash rods.

IMPLEMENTATIONAfter the installation of the mechanisminto the profile, insert the handle andits ring into the spindle and press thehandle against the profile while atthe same time tightening the screwuntil the spindle is punched.

MAINTENANCEEach year check and ensure allfixings are suitably tightened andlubricated as required..

1 hole Ø18

2 holes Ø6.2*

43

4.5

MAX

.

14A

214.

5 M

AX.

20.5 11.5

15

20

31.

5

Vectrale Mechanism with spindleVectrale Mechanism with spindleshown here with BERCY handle 7205

CLOSING DEVICES

WARNINGThe length of screws and the outgoingpart of the spindle vary according tothe dimension of the sash “A”. It isimperative that the dimension of “A”is accurate at the time of ordering.

VECTRALE mechanism is directlyconnected to sash rods.

MAINTENANCEEach year check and ensure allfixings are suitably tightened andlubricated as required.

15

20

31.

5

1 hole Ø18

2 holes Ø10.5

2 holes Ø5.5

43

4.5

MAX

.

14A

214.

5 M

AX.

20.5 11.5

15 MIN.

17

shown here with PARAPHE handle on backplate

Vectrale mechanismwithout spindleVectrale mechanismwithout spindle

18

“CE” Cremone bolt“CE” Cremone bolt

WARNINGTo ensure flush fit of the tapped rivets it is necessary to trim back the 7.2mm diameter holes(chamfer 0.2mm to 0.3mm).

“CE” Cremone Bolt is suited to window sash profiles of 12mm to 19mm.The length of screws and the outgoing part of thespindle vary according to the dimension of thesash “A”. It is imperative that the dimension of“A” is accurate at the time of ordering.


Bercy

5758

Opale

8992

Estivale

9847

Square socket

5244

“CE” Cremone bolt

Paraphe

4484

Handles

Systemreferences

4.5

MAX

.

4.5

MAX

.

21

19 MIN.

9887 x 6

242

2 holes Ø7.2*

Drivers ref. 5586

ABOVE FIXINGshown here with PARAPHE handle model

CLOSING DEVICES

19

“CE” Cremone bolt“CE” Cremone bolt

WARNINGTo ensure flush fit of the tapped rivets it is necessary to trim back the 7.2mm diameter holes(chamfer 0.2mm to 0.3mm).

The successful installation of this closing mechanism is dependent on the characteristics of the sash profile. Please contact us for moredetails.


Bercy

5757

Opale

8993

Estivale

9848

Square socket

5244

“CE” Cremone bolt

Paraphe

4473

Handles

Systemreferences

Drivers ref. 3397

98

81 x 6

75 x 12

2

2 holes Ø7.2*

4 M

IN.

21

15.5

MIN

.

FRONT FIXINGshown here with OPALE handle model

20

Fittings with adjustaFittings with adjusta

HAND

LE A

XIS

Y (fr

om th

e ins

ide of

sash

groo

ve)

48

T3

T2

T2

T2

T1

T1

T1

48

LR/2 - 126

X

48

LR (width from the inside of sash groove)

D

A

B

C

E

Rods cutting

8 8

Ø6

4.5

2.5

19.5

14.5

VECTRALE MECHANISM

“CE” CREMONE BOLT – ABOVE FIXING

“CE” CREMONE BOLT – FRONT FIXING

CLOSING DEVICES

21

able rollersable rollers

2 POINTS

-

-

2

-

2

References

Driver 5586

Driver 3397

Roller socket 3367

Corner gear 3225

Roll catch 3561

Sign

A

B

C

D

E

4 POINTS

-

-

2

2

4

2 POINTS

2

-

2

-

2

4 POINTS

2

-

2

2

4

2 POINTS

-

2

2

-

2

4 POINTS

-

2

2

2

4

VECTRALEmechanism

“CE” Cremone Boltabove-fixing

“CE” Cremone Bolt front fixing

HOW TO CREATE YOUR FITTING

FITTING DESCRIPTIONTo ensure the correct system is used with the correct handle, please refer to the table below.

IMPLEMENTATIONAfter the profiles and rods have been machined(refer to second table), clean and lubricate the15 x 20 sash groove with a non-acid lubricant.

FIRST USELubricate keepers with a non-acid lubricant.

Adjust the rollers +/- 1mm depending on thepressure required.


> FRONT FIXING

2 POINTS

X - 106

-

-

Qty

2

2

2

Rod

T1

T2

T3

4 POINTS

-

LR/2 - 177

Y - 152

2 POINTS

X - 121

-

-

4 POINTS

-

LR/2 - 192

Y - 152

2 POINTS

X - 140

-

-

4 POINTS

-

LR/2 - 211

Y - 152

VECTRALEmechanism



RODS CUTTING

0,5

0,52 holes Ø3.8

2 holes Ø3.8

> ABOVE FIXING

Roller adjustment

22

Fittings with turningFittings with turning

Rods cutting

8 8

Ø6

4.5

2.5

19.5

14.5

HAND

LE A

XIS

Y (fr

om th

e ins

ide of

sash

groo

ve)

48

T3

T2

T2

T2

T1

T1

T1

48

LR/2 - 126

X

48

LR (width from the inside of sash groove)

D

A

B

C

E

VECTRALE MECHANISM

“CE” CREMONE BOLT – ABOVE FIXING

“CE” CREMONE BOLT – FRONT FIXING

CLOSING DEVICES

23

g rollersg rollers

2 POINTS

-

-

2

-

2

References

Driver 5586

Driver 3397

Clip roller 5223

Corner gear 3225

Roll Catch 3561

Sign

A

B

C

D

E

4 POINTS

-

-

2

2

4

2 POINTS

2

-

2

-

2

4 POINTS

2

-

2

2

4

2 POINTS

-

2

2

-

2

4 POINTS

-

2

2

2

4

VECTRALEmechanism



HOW TO CREATE YOUR FITTING

2 POINTS

X - 34

-

-

Qty

2

2

2

Rod

T1

T2

T3

4 POINTS

-

LR/2 - 177

Y - 79,5

2 POINTS

X - 49

-

-

4 POINTS

-

LR/2 - 192

Y - 79,5

2 POINTS

X - 68

-

-

4 POINTS

-

LR/2 - 211

Y - 79,5

VECTRALEmechanism



RODS CUTTING

FITTING DESCRIPTIONTo ensure the correct system is used with the correct handle please refer to the table below.

IMPLEMENTATIONAfter the profiles and rods have been machined(refer to second table), clean and lubricate the15 x 20 sash grove with a non-acid lubricant.

FIRST USELubricate keepers with a non-acid lubricant.


0,5

0,52 holes Ø3.8

2 holes Ø3.8

> FRONT FIXING

> ABOVE FIXING

Turning roller

PROPERTYTThhiiss ddooccuummeenntt iiss oouurr pprrooppeerrttyy.. AAllll rreepprroodduuccttiioonn rriigghhttss aarree rreesseerrvveedd.. IInn ccaassee ooff ppaatteenntt oorr rreeggiissttrraattiioonn ooff aa mmooddeell,, aallll rriigghhttss aarreerreesseerrvveedd.This manual was made on basis of development of the fittings on theissue date. Claims to its improper application shall not be taken intoaccount.

DICAD 004 - October 2003

Agen

ce M

ARLO

W 0

2 41

24

18 0

0 - r

ef :

02/0

508

- 09/

03 -

Cou

leur

s no

n co

ntra

ctue

lles.

WARRANTYThe manufacturer declines all responsibility for malfunctioning anddamage caused to the fittings and the windows or doors equippedwith these fittings, resulting from the fittings not being fixed in accor-dance with the manufacturer’s instructions, from an improper use ofthe fittings or defective maintenance or if the windows remain in ope-ned position during a storm or strong winds.For selected fittings our warranty will only apply if strict machining, installation and compliance with the adaptation instruc-tions have been fulfilled within the limit of the effective technicalrecommendations included to this manual.The warranty will be applied to products fitted in accordance with ourinstructions and will not apply to products which are not manufactu-red or supplied by us.

Finishes Finishes

Black 9005S

White 9010B

Any othercolour, pleasecontact us.

Grey AL9006 EL

Silver Anodized

Bronze1247

Head Office : 25, rue Michel Couet, F-49160 LONGUÉ (France) - Phone : +33 2 41 53 21 00 - Fax : + 33 2 41 53 22 24E-mail : [email protected] - Site Internet : www.bezault.com

Founded in year 1850, BEZAULT is an ASSA ABLOY Group company. With outstanding competences in design and innovation,BEZAULT is the French leading company for the manufacturing of door and window equipments combining the most creative design

with the best performance. The company’s customer base includes the Building Industry and the Shipbuilding Industry.

The ASSA ABLOY Group is the world’s leading manufacturer and supplier of locks and assorted productsdedicated to satisfying end-user needs for security, safety and convenience.

window closing devices

Documents