winter warmers brochure

13
For your nearest store: barbequesgalore.com.au *Inbuilt wood heaters are not zero clearance appliances, which means they must not be installed in timber stud walls or within an enclosure made of combustible materials. Inbuilt heaters can only be installed into an existing masonry fireplace or a full masonry enclosure. Installation specifications are a guide only and are subject to change. All inbuilt heaters must be installed in a full masonry cavity and to AS/NZS 2918:2001 specifications. In general - no combustible material should be closer than 600mm above the hot air outlet or 300mm from the sides of the outer side of the heater box. Refer to the appliance installation manual for all clearances and procedures prior to installation. Heating performance may reduce as a result of vaulted ceilings, drafts, large glassed areas or poor insulation. At Barbeques Galore we are continually striving to improve our range of heaters, accessories and spare parts. We reserve the right to change specifications without notice. Some products may not be available at all stores. ABN 93 001 354 454. Jan 2014. POSBW14 6 reasons to buy from the best in the business. WE’RE AUSTRALIA’S LARGEST RETAILER OF WOOD HEATERS We have a national network of stores that support our huge range of premium quality heaters. OVER 30 YEARS OF HEATING EXPERIENCE Our fully trained staff are available in store to offer you better advice at no extra price ensuring you are getting the perfect heater for your home. REVOLUTIONARY CLEAN BURN SYSTEM IN EVERY HEATER It ensures maximum heat output and reduced smoke emissions to care for the environment. 10 YEAR FIREBOX WARRANTY ON MOST HEATERS Our guarantee of better quality to give you peace of mind. Barbeques Galore proudly supports the activities of Landcare Australia through its membership of the AHHA. 100% AUSTRALIAN OWNED

Upload: salmatidr

Post on 22-Mar-2016

266 views

Category:

Documents


8 download

DESCRIPTION

 

TRANSCRIPT

Page 1: Winter warmers brochure

For your nearest store: barbequesgalore.com.au

*Inbuilt wood heaters are not zero clearance appliances, which means they must not be installed in timber stud walls or within an enclosure made of combustible materials. Inbuilt heaters can only be installed into an existing masonry fireplace or a full masonry enclosure. Installation specifications are a guide only and are subject to change. All inbuilt heaters must be installed in a full masonry cavity and to AS/NZS 2918:2001 specifications. In general - no combustible material should be closer than 600mm above the hot air outlet or 300mm from the sides of the outer side of the heater box. Refer to the appliance installation manual for all clearances and procedures prior to installation. Heating performance may reduce as a result of vaulted ceilings, drafts, large glassed areas or poor insulation. At Barbeques Galore we are continually striving to improve our range of heaters, accessories and spare parts. We reserve the right to change specifications without notice. Some products may not be available at all stores. ABN 93 001 354 454. Jan 2014. POSBW14

6 reasons to buy from the best in the business. WE’RE AUSTRALIA’S LARGEST

RETAILER OF WOOD HEATERS We have a national network of stores that support our huge range of premium quality heaters.

OVER 30 YEARS OF HEATING EXPERIENCE Our fully trained staff are available in store to offer you better advice at no extra price ensuring you are getting the perfect heater for your home.

REVOLUTIONARY CLEAN BURN SYSTEM IN EVERY HEATER It ensures maximum heat output and reduced smoke emissions to care for the environment.

10 YEAR FIREBOX WARRANTY ON MOST HEATERS Our guarantee of better quality to give you peace of mind.

Barbeques Galore proudly supports the activities of Landcare Australia through its membership of the AHHA.

100% AUSTRALIAN OWNED

Page 2: Winter warmers brochure

WA R M E R SW I N T E R

AUSTRALIA’S LARGEST RETAILER OF WOOD HEATERS.

Page 3: Winter warmers brochure

2

Choosing a wood heaterThe four major factors to consider when it comes to choosing a wood

heater are:

• Size of your home

• Building layout

• Number of rooms you’d like to heat

• Your priorities between aesthetics and efficiency

Barbeques Galore offers many different options to satisfy every one of

these needs.

RADIANT HEATERS

Radiant wood heaters have all sides of the firebox exposed. They are

designed for heating large open areas where heat can travel in straight

lines. Ideal for rumpus room areas or large open plan homes.

CONVECTION HEATERS

Convection heaters are designed with an air cavity between the firebox

and the outer skin. This means that the air in the cavity heats up, expands

and rises, drawing more air in from below and forcing the hot air out

through the top of the heater. A good clean burn convection heater can

produce over 3 cubic metres of heated air per minute.

INBUILT HEATERS

Inbuilts are the perfect way to convert an existing open fireplace into a

far more efficient and user friendly heat source. All inbuilts feature an

outer shell which ensures that heat is transferred into the room rather

than absorbed into the brickwork. They all feature fans which force the

hot air out rather than allowing it to travel up the flue.

DO I NEED A FAN?

Fans will help circulate larger volumes of warm air, breaking down the

layers of hot air that collect at ceiling level. Consequently a wood heater

with a fan will heat a room faster than a conventional heater.

OTHER POINTS TO CONSIDER

Check the construction quality of the firebox, as this is the engine of any

wood heater. All Norseman and Austwood heaters feature high grade

6mm steel fireboxes while our Saxon heaters are fitted with super strong

8mm steel fireboxes.

NOTHING BEATS THE WARMTH OF A WOOD FIRE

No other form of heating can match sitting in

front of a roaring wood fire.

Thanks to the technological breakthroughs of

the past few years, wood heaters are now as

efficient as they are pleasurable. Today’s clean

burning heaters use less fuel and create more

heat than ever before.

Barbeques Galore – Australia’sone-stop wood heating shopAustralia’s largest wood heating retailer, Barbeques Galore, has

been manufacturing wood heaters for over 25 years!

WE OFFER A WOOD HEATER TO SUIT EVERY REQUIREMENT AND MOST OF OUR HEATERS ARE BACKED BY A 10 YEAR FIREBOX WARRANTY

Shop around, you’ll find our staff are fully trained in all aspects of

wood heating and can advise you on the size and output you require,

as well as organising installation and finance should you require it.

Once your heater is installed, you can be sure that Barbeques

Galore will always be there with any accessories, advice and

maintenance you may need.

So put your feet up, pour a cup of coffee and have a look at how a

wood heater will make a wonderful, practical and stylish addition

to your home.

Page 4: Winter warmers brochure

3

MANOR 1000Capacity up to 150 square metres. Metallic black hi temp fi nish

Clearances Rear Side Wall Wall Corners Hearth

Maxiheat decromesh fl ue kit 420 675 400 300

Maxiheat fl ue kit with single shield 420 675 400 300Maxiheat fl ue kit with double shield 350 675 400 300

Height: 645 Width: 695 Depth: 480

Recommended Hearth: MXTH1BLK/GRY (1m x 1m)

REAR OF HEATER TO FLUE CENTRE = 152mm

Stylish warmth for a cold night matched with low emissions and remarkably efficient designs makes the Maxiheat range of wood heaters fit comfortably into any home.

MANOR 2000Capacity up to 220 square metres. Metallic black hi temp fi nish

Clearance Rear Side Wall Wall Corners HearthMaxiheat decromesh fl ue kit 150 400 75 450

Height: 730 Width: 670 Depth: 565

Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m)

REAR OF HEATER TO FLUE CENTRE = 196mm

NOR 2000MANNOR 2000

00are m

ue ki

De

MXT

LUE C

MANOR 10Capacity up to 150 squa

Clearances

Maxiheat decromesh fl u

Maxiheat fl ue kit with single shieldMaxiheat fl ue kit with double shield

Height: 645 Width: 695

Recommended Hearth:

REAR OF HEATER TO FL

5

Page 5: Winter warmers brochure

4

LEGEND Capacity up to 250 square metres. Ironbark hi temp fi nish

Clearances Rear Wall Side Wall Corners Hearth

Maxiheat fl ue kit (no shield) 400 400 250 300

Maxiheat fl ue kit with single shield (MXRSISS) 200 400 125 300

Maxiheat decromesh fl ue kit 200 400 125 300

Maxiheat fl ue kit with double shield (MXRSISS & MXRSOB) 90 400 125 300*Optional fan available

Height: 790 Width: 680 Depth: 600

Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m)

REAR OF HEATER TO FLUE CENTRE = 175mm

NEVADA Capacity up to 180 square metres. Ironbark hi temp fi nish

Clearances Rear Wall Side Wall Corners Hearth

Maxiheat fl ue kit (no shield) 425 400 225 300

Maxiheat fl ue kit with single shield (MXRSISS) 175 400 175 300

Maxiheat decromesh fl ue kit 175 400 175 300

Maxiheat fl ue kit with double shield (MXRSISS & MXRSOB) 100 400 175 300*Optional fan available

Height: 750 Width: 620 Depth: 500

Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m)

REAR OF HEATER TO FLUE CENTRE = 175mm

LUMBERJACK Capacity up to 150 square metres. Ironbark hi temp fi nish

Clearances Rear Wall Side Wall Corners Hearth

Maxiheat fl ue kit (no shield) 475 750 525 300

Maxiheat fl ue kit with single shield (MXRSISS) 300 750 525 300

Maxiheat decromesh fl ue kit 300 750 525 300

Maxiheat fl ue kit with double shield (MXRSISS & MXRSOB) 225 750 525 300

Height: 750 Width: 560 Depth: 500

Recommended Hearth: MXTH1BLK/GRY (1m x 1m)

REAR OF HEATER TO FLUE CENTRE = 175mm

FORESTER Capacity up to 180 square metres. Ironbark hi temp fi nish

Clearances Rear Wall Side Wall Corners Hearth

Maxiheat fl ue kit (no shield) 475 800 525 300

Maxiheat fl ue kit with single shield (MXRSISS) 250 800 525 300

Maxiheat decromesh fl ue kit 250 800 525 300

Maxiheat fl ue kit with double shield (MXRSISS & MXRSOB) 150 800 525 300

Height: 730 Width: 560 Depth: 600

Recommended Hearth: MXTH1GRY/GRY (1m x 1m)

REAR OF HEATER TO FLUE CENTRE = 175mm

earth

300

300

300

300

OF HEATER TO FLUE CENTRE == 175mm

NCapa

Clea

Max

Maxsing

Max

Maxshiel*Opt

Heig

Reco

REAR

LUCap

Clea

Max

Maxsing

Max

Maxshie

Heig

Rec

REA

From compact wood heaters to inbuilts, Norseman has a heater for every need and every family. Incredibly well built and remarkably efficient, the Norseman range has been designed to fit comfortably into either contemporary or traditional décor. Like all our wood heaters the Norseman range is backed up by our 10 year firebox guarantee.

Page 6: Winter warmers brochure

5

SILHOUETTE GLX Capacity up to 350 square metres. Hi temp fi nish

Clearances Rear Side Wall Wall Corners Hearth

Maxiheat decromesh fl ue kit with outer shield (MXRSOB) 75 350 50 300

Height: 770 Width: 830 Depth: 670

Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m)

REAR OF HEATER TO FLUE CENTRE = 185mm

SILHOUETTE GL Capacity up to 280 square metres. Hi temp fi nish

Clearances Rear Side Wall Wall Corners Hearth

Maxiheat decromesh fl ue kitwith outer shield (MXRSOB) 50 350 75 300

Height: 730 Width: 790 Depth: 580

Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m)

REAR OF HEATER TO FLUE CENTRE = 172mm

Sleek curves and smooth flowing lines give the Norseman Silhouette an ultra contemporary look. With a long burn time, integral three speed fan and massive heat output, the Silhouette performs as well as it looks. The range is available in two finishes, Ironbark and Pewter and like all our wood heaters, comes with a 10 year firebox guarantee.

*See inbuilt installation disclaimer on back page.

SICap

Cle

Mawit

Hei

Rec

REA

ve the Norseman Silhouette an ultra contemporary loat output, the Silhouette performs as well as it lookske all our wood heaters, comes with a 10 year firebo

uette an utte perform

rs, comes w

Getting the most from your Norseman Silhouette.The Norseman Silhouette range features our unique full flow fan air circulation system – a revolutionary feature that provides you with a number of benefits when heating your home:

• Air is circulated over the entire surface area of the heavy duty firebox, unlike some manufacturers who only direct fan air across some parts of the firebox.

• Additional vents allow for greater heat circulation, unlike some heaters that force air in only one direction.

• Maximum heat output is distributed gently and evenly into your home.

SILHOUETTE GLI INBUILT Capacity up to 240 square metres. Hi temp fi nish

Height Width Depth

Maxiheat chimney kit Cabinet 600 687 456Fascia 700 980 105

REAR OF HEATER TO FLUE CENTRE = 151mm

5*See inbuilt installation disclaimer on back page.

T

pt

5605

th

65

th

0

Colours:

Ironbark Pewter

Colours:

Ironbark Pewter

Colours:

Ironbark Pewter

SQ

U

ARE M ETRE

S

HE

ATS A MASSIV

E

Page 7: Winter warmers brochure

6

BLAXLAND INBUILTCapacity up to 150 square metres. Ironbark hi temp fi nish

Height Width Depth

Maxiheat chimney kitCabinet 574 543 386Fascia 705 870

BLAXLAND Capacity up to 180 square metres. Ironbark hi temp fi nish

Clearances Rear Side Wall Wall Corners Hearth

Maxiheat decromesh fl ue kit 200 300 100 300

Maxiheat decromesh fl ue kitwith outer shield (MXRSOB) 150 300 100 300

Height: 687 Width: 630 Depth: 492

Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m)

REAR OF HEATER TO FLUE CENTRE = 193mm

The Austwood range of wood heaters have been designed to provide you with maximum heat and minimum fuss. They’re stylish, efficient, low maintenance and incorporate a large glass door to ensure you get all the pleasure that a wood heater offers. They also feature a 3 speed fan, a hot air wash to keep the glass viewing area clean and are expertly constructed from solid 6mm steel.

WENTWORTH Capacity up to 260 square metres. Ironbark hi temp fi nish

Clearances Rear Side Wall Wall Corners Hearth

Maxiheat fl ue kit (no shield) 300 400 100 400

Maxiheat decromesh fl ue kitwith outer shield (MXRSOB) 100 400 50 400

Height: 736 Width: 690 Depth: 542

Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m)

REAR OF HEATER TO FLUE CENTRE = 193mm

WENTWORTH

*See inbuilt installation disclaimer on back page.

Page 8: Winter warmers brochure

7

WENTWORTH INBUILTCapacity up to 220 square metres. Ironbark hi temp fi nish

Height Width Depth

Maxiheat chimney kitCabinet 624 603 438Fascia 755 931

REAR OF HEATER TO FLUE CENTRE = 138mmLAWSONCapacity up to 320 square metres. Ironbark hi temp fi nish

Clearances Rear Side Wall Wall Corners Hearth

Maxiheat fl ue kit (no shield) 375 525 200 670

Maxiheat decromesh fl ue kit with outer shield (MXRSOB) 250 525 125 670

Height: 886 Width: 790 Depth: 542

Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m)

REAR OF HEATER TO FLUE CENTRE = 193mm

W N W N

LAWSON INBUILTCapacity up to 280 square metres. Ironbark hi temp fi nish

Height Width Depth

Maxiheat chimney kitCabinet 674 703 438Fascia 805 1031

*See inbuilt installation disclaimer on back page.

*See inbuilt installation disclaimer on back page.

Page 9: Winter warmers brochure

8

ROSEWOOD Capacity up to 250 square metres. Ironbark hi temp fi nish

Clearances Rear Side Wall Wall Corners HearthMaxiheat decromesh fl ue kit 250 500 150 500Maxiheat decromesh fl ue kit with outer shield (MXRSOB) 150 500 50 500Maxiheat decromesh fl ue kit with inner shield (MXRSISS)located between the active fl ue and decromesh 100 500 50 500

Height: 775 Width: 690 Depth: 560 *Includes 3 speed fan

Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m)

REAR OF HEATER TO FLUE CENTRE = 174mm

The award winning team at Saxon has achieved excellence in wood heater design with their range of heaters. The range combines massive heat output, high efficiency, a heavy duty 8mm steel firebox, self cleaning glass doors and genuine good looks. All Saxon heaters have also been tested and approved for both safety and efficiency when fitted with a Maxiheat flue system.

MAHOGANYCapacity up to 350 square metres. Ironbark hi temp fi nish

Clearances Rear Side Wall Wall Corners HearthMaxiheat decromesh fl ue kit 250 450 150 500

Maxiheat decromesh fl ue kit with outer shield (MXRSOB) 150 450 150 500

Maxiheat decromesh fl ue kit with inner shield (MXRSISS) located between the active fl ue and decromesh 100 450 150 500

Height: 830 Width: 775 Depth: 600 *Includes 3 speed fan

Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m)

REAR OF HEATER TO FLUE CENTRE = 180mm

Clear

MaxiMaxiMaxilocat

Heig

Reco

REAR

MAHOGANY

SQ

UARE M ETR

ES

HE

ATS A MASSIV

E

WALNUT Capacity up to 170 square metres. Ironbark hi temp fi nish

Clearances Rear Side Wall Wall Corners Hearth

Maxiheat decromesh fl ue kit with inner shield (MXRSISS) located between the active fl ue and decromesh 75 350 50 300

Height: 650 Width: 606 Depth: 500 *Includes 3 speed fan

Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m)

REAR OF HEATER TO FLUE CENTRE = 171mm

epth: 560 *Include

TH12BLK/GRY (1.2m x 1.2m)

CENTRE = 174mm

rth

00

es 3 speed fan

Page 10: Winter warmers brochure

9

BLACKWOOD INBUILT Capacity up to 230 square metres. Ironbark hi temp fi nish

Height Width DepthMaxiheat chimney kitFascia 700 900 Cabinet 600 635 434

REAR OF HEATER TO FLUE CENTRE = 145mm*Includes 3 speed fan

*See inbuilt installation disclaimer on back page.

8mm

8

MM STEEL

DU

R

ABLE FIREB

OX

BLACKWOOD Capacity up to 250 square metres. Ironbark hi temp fi nish

Clearances Rear Wall SideWall Corners Hearth

Maxiheat decromesh fl ue kit 100 250 50 300

Height: 740 Width: 700 Depth: 530 *Includes 3 speed fan

Recommended Hearth: MXTH12BLK/GRY (1.2m x 1.2m)

REAR OF HEATER TO FLUE CENTRE = 162mm

Warm your home, winter after winter

Saxon wood heaters have been designed in Tasmania for the unique

Tasmanian conditions.

Saxon wood heaters set the standard in wood heating

technology and durability by providing the first 8mm steel

firebox available in Australia. This thick firebox doesn’t

need firebricks and comes with a 10 year warranty that will

give you peace of mind that your Saxon wood heater will

last winter after winter. Therefore, when buying a Saxon

wood heater you will have a clean burning and efficient

method of keeping your home warm throughout winter.

Saxon wood heaters have been tested in Australia, on Australian grown hardwood

and to Australian standards.

C

C

M

H

R

R

Page 11: Winter warmers brochure

10

Five most common forms of installation.Once you have selected your wood heater it is just as important to ensure you have selected the right location within your home and that the heater is installed correctly. A qualified professional

should carry out installation as a number of serious problems can occur. The diagrams below show the five most common forms of installation.

• Consider the position of your wood heater

• After the wood heater’s position has been decided on, the flue system is then installed

• The flue system must be flashed (sealed) at the point where it exits the roof lining

Floor Penetration Inbuilt Installation45 Degree Wall Penetration

Cathedral Ceiling Installation

Most common form of installation: Single Storey Installation

What do I need to know when buying a wood heater?

What is the size of the area you need to heat? Is it open plan or small rooms connected by hall-ways?

What is the height of the room the wood heater will be in?

Are your ceilings flat or at an angle?

What type of floor coverings are in the room?

What material is the roof made from? Tiled, metal, pitched, flat etc.

Where will the heater be located? Internal or external wall, corner or flat against the wall or in an existing chimney.

What materials are the walls made from? Do you have curtains nearby?

What is the height of the gap in the roof space, are there any obstructions such as beams that may require an offset?

What is the distance from the peak of the roof to the point where the flue will exit?

Are there power points located nearby for the fan?

Is your home single or double storey?

MAKE SURE YOU’RE GETTING THE RIGHT WOOD HEATER FOR YOUR HOME.

Page 12: Winter warmers brochure

11

While most heaters are installed without issue there are always exceptions to the rule. The diagram on the right illustrates the most common issue; getting the flue height correct to avoid issues such as down drafts. All wood heater installations must meet the Australian Installation Standards.

The minimum height for the wood heater installation is 4.6 metres from the bottom of the heater to the top of the flue. However, there are circumstances that require the flue to be extended.

• The flue needs to extend from the exit point of the roofline by a minimum of 1 metre

• If the flue is within 3 metres of the roof’s peak then it needs to be extended beyond that point by a minimum of 1 metre

• If the flue is within 3 metres of the neighbour’s roof then it needs to be extended beyond the highest point by a minimum of 1 metre

By ensuring that these simple measures are taken you can enjoy the use of your wood heater without the hassle of down drafts or annoying your neighbours with smoke from the flue.

Installation requirements are adhered to by professional installers and therefore to avoid any issues it is best to use a qualified installer.

It won’t surprise you to know that we carry an extensive range of heating accessories. From pokers and tongs right through to wood and fire lighters. Whatever you require, just ask our staff for better advice on the right accessories.

Common installation considerations. Discover our huge range of heating accessories.

Neighbours Property

Window

4.6Mts Minimum

If less than 3 metres: Flue is too low

Flue termination point

If less than 3 metres: Flue is too low

1Mt Min

Choosing the right flue system is as important as the choice of wood heater. To extract maximum performance from your Barbeques Galore wood heater we strongly recommend the use of Maxiheat flue systems. Maxiheat flue systems are designed, tested and approved to

Australian Standards. Maxiheat flue systems and components have been manufactured to high standards from quality materials for over 25 years and are the market leaders in flue technology.

We’ll find the right flue for you.

Page 13: Winter warmers brochure

Checklist.Store Name:

Address:

Phone:

Date:

Installation Date:

Sales Person:

CeilingStandard Over 8’ Cathedral 2 Storey Drop Box

RoofTiled Metal Pitched Flat Other

WallsPlaster Timber Brick Internal External

FloorSlab Timber Carpet Tiles Other

Hearth

Carpet Guard

Cust. Built Existing Nil Other

ShieldSingle Double Dec. Mesh Nil Other

Nearby

High walls High trees Windy area Nil Other

Other

Power Point

Remove Old Heater

Permit SmokeDetectors

Wood heating quote.

Heater Model (inc Colour) Qty Code Cost

Flue KitMetallic BlackStainlessDecromeshChimney

MXFKT1MBMXFKT1SSMXFKDEC1MXFKCH1

$$$$

Heat ShieldDecromesh – Club DesignInner S/SOuter Black

MXDCPMXRSISSMXRSOB

$$$

Extension LengthsStainless 1m x 6” diamPainted 1m x 6” diamDecorative Casing

MXSL1000SSMXSL1000KMXDCP…

$$$

Hearth

Corner

1m x 1m1m x 1.2m1.2m x 1.2m

1200mm

MXTH1BLK/GRYTH12SLMXTH12BLK/GRY

MXTHCNRBLK/GRY

$$$

$

FirescreenDecorative/Child Guard $

Fan - 3 speed MXFAN933 $

Toolset/Wood Bucket $

Delivery Charge $

Installation ChargeStandard Single StoryWall Penetration Installation

Total package price including GST $

Quotes are completed on information provided in store. Additional costs may be incurred at installation upon site inspection if information is incorrect.