winter's grandeur mini 1 - robert kaufman fabrics · page 5 step 6: arrange one 3-1/2”...
TRANSCRIPT
Just KissesDesigned by Robert Kaufman Fabricswww.robertkaufman.com
Featuring
WINTER’S GRANDEUR MINI QUILT 1
For questions about this pattern, please email [email protected].
Finished quilt measures: 24” x 24”
page 2
Fabric and Supplies Needed
Color Fabric Name/SKU Yardage
SRKM-16584-80 EVENING
SRKP-16687-90 PEARL
SRKM-16582-80 EVENING
SRKM-16582-254 FROST
SRKM-16583-80 EVENING
Color Fabric Name/SKU Yardage
Fabric amounts based on yardage that is 42” wide.
A
B
C
D
E
1/4 yard
3/8 yard
1/3 yard
1/4 yard
3/8 yard
Copyright 2017, Robert KaufmanFor individual use only - Not for resale
You will also need:7/8 yard for backing1/4 yard for binding
- Read through all of the instructions before beginning.- All of the seam allowances are 1/4” unless otherwise noted.- Press seam allowances open unless otherwise noted. - Width of fabric (WOF) is equal to at least 42” wide.- Right sides together has been abbreviated to RST.- Remember to measure twice and cut once!
From Fabric A, cut:four of Template 1four of Template 1 - reverse*
From Fabric B, cut:one 5-1/4” x WOF strip. Subcut: two 5-1/4” squares. Cut each square in half along both diagonals, creating eight triangles. Trim the remainder of the strip to 3-3/8” wide and subcut: four 3-3/8” squaresone 3-1/2” x WOF strip. Subcut: eight 3-1/2” x 4-1/2” rectangles
Notes Before You Begin
Cutting Instructions
page 3
From Fabric C, cut:one 3-1/2” x WOF strip. Subcut: four 3-1/2” squarestwelve of Template 1 - reverse
From Fabric D, cut:twelve of Template 1
From Fabric E, cut:one 5-1/4” x WOF strip. Subcut: three 5-1/4” squares. Cut each square in half along both diagonals, creating twelve triangles. Trim the remainder of the strip to 4-1/2” wide and subcut: four 4-1/2” squaresone 3-1/2” x WOF strip. Subcut: eight 3-1/2” squares
From the Binding Fabric, cut:three 2-1/2” x WOF strips
*Keep the reverse of Template 1, Fabric A separate. The template is not symetrical and will not line up perfect if mixed up.
This quilt involves sewing y-seams in some areas. It is important to mark the point to start/stop the seams at these intersections.
Step 1: On the back side of the Template 1 (and Template 1 reverse) pieces, all triangles and all 3-1/2” Fabric B and E squares, mark the points shown in the sample here. Each point is 1/4” away from the raw edge.
Prepare the Pieces
page 4
Step 2: Sew one Fabric A/Template 1 piece and one Fabric A/Template 1 - reverse piece together, starting and stopping at the marked points. Do not press the seam yet. Repeat to make four units like this.
Assemble the Center Block
Step 3: Sew a 3-1/2” Fabric B square to a completed Step 2 unit, as shown, starting at the raw edge and pivoting with your needle down at the marked point for the y-seam. Then sew to the edge. Press the seam toward the square. Repeat to make four units like this.
Step 4: Sew a Fabric B triangle to the top right edge of a completed Step 3 unit, aligning the marked points. Do not press this seam yet. Repeat to make four units like this.
Step 5: Sew the four center block units together, fi rst sewing two units together, then sewing two pairs together. Stop to pivot with your needle down at each marked point. Press the seams to one side when fi nished. Clip any seams necessary to help the seam lay fl at, taking care to not clip in to the stitches.
page 5
Step 6: Arrange one 3-1/2” Fabric C square, one 4-1/2” Fabric E square and two 3-1/2” x 4-1/2” Fabric B rectangles in two rows of two. Sew together to form rows, pressing seams away from the rectangles. Sew the rows together to form the corner block, pressing the seams toward the Fabric E square. Repeat to make four Corner Blocks.
Assemble the Corner Blocks
Step 7: Sew one Fabric C/Template 1 - reverse to the right edge of one Fabric D/Template 1 pieces, starting and stopping at the marked points. Do not press the seam yet. Repeat to make twelve units like this.
Assemble the Side Blocks
Step 8: Sew a Fabric E triangle to the top edges of a completed Step 7 unit, starting at the outside edge of the seam and pivoting with your needle down at the marked point for the y-seam. Then sew to the opposite edge. Press the seam toward the triangle. Clip the seam at the pivot point if necessary to help the seam lay fl at, taking care to not clip in to the stitches. Repeat to make twelve units like this.
Step 9: Sew three completed Step 8 units together, starting and stopping all seams at the marked points. Repeat to make four units like this. Do not press the seams yet.
page 6
Step 10: Sew two 3-1/2” Fabric E squares to a completed Step 9 unit, as shown, starting at the raw edge and pivoting with your needle down at the marked point for the y-seam. Then sew to the edge. Press the seam toward the square. Repeat to make four units like this.
Step 11: Sew a Fabric B triangle to a completed Step 10 unit, as shown. Start at the outside edge of the seam and pivot with your needle down at the marked point for the y-seam. Then sew to the opposite edge. Press the seam toward the triangle. Clip the seam at the pivot point if necessary to help the seam lay fl at, taking care to not clip in to the stitches. Repeat to make four units like this.
Step 12: Arrange the blocks into three rows of three blocks. Note the fabric placement and block orientation in the Quilt Assembly Diagram.
Step 13: Sew the blocks together to form rows. Press the seams away from the Side Blocks.
Step 14: Sew the rows together to form the quilt center. Press the row seams open.
Your mini quilt is now complete! Baste, quilt, bind and enjoy!
Assemble the Quilt
page 7
Print at 100%.
Templates
1” box for scale
WINTER’S GRANDEUR MINI QUILT 1
TEMPLATE 1