wire access sss -...

Job Name: ____________________________________

Fixture Type: __________________________________

Job Number: __________________________________

Distributor: ____________________________________

Distributor P.O.: ________________________________

POLE DATA

1

ESSS - Square Straight Steel Poles

1) Replace (X) with number below to indicate fixture drilling 1` RT21, RT25, SQ19, SQ25, SQR19, SQR25 2 RT32 Note: See Pole Data table below for dimensions & bolt information

Allowable Pole EPA (steady wind/gusting wind x 1.3)

Pole Cat. No. Dia.Wall Thk

GaugePole Ht.

Bolt Circle AB Proj Anchor Bolts Base Plate (sq.)Est.

Weight80/104 90/117 100/130 120/156

ESSS-10-40-1 4" 0.119 11 10 11" 4" 3/4"x30"x3" 10.25"x.75" 91 22.0 17.0 14.4 11.0ESSS-12-40-1 4" 0.119 11 12 11" 4" 3/4"x30"x3" 10.25"x.75" 104 16.0 13.2 10.4 7.5ESSS-16-40-1 4" 0.119 11 16 11" 4" 3/4"x30"x3" 10.25"x.75" 128 10.2 7.8 6.0 4.0ESSS-20-40-1 4" 0.119 11 20 11" 4" 3/4"x30"x3" 10.25"x.75" 160 5.6 3.8 2.4 1.8ESSS-25-40-1 4" 0.119 11 25 11" 4" 3/4"x30"x3" 10.25"x.75" 190 2.2 N/R N/R N/RESSS-25-50-7 5" 0.179 7 25 11" 4" 1"x36"x4" 12"x1" 324 11.2 7.8 5.4 4.0 ESSS-30-50-7 5" 0.179 7 30 11" 4" 1"x36"x4" 12"x1" 398 6.0 3.4 1.6 N/RNOTE: Responsibility lies with the specifier for correct pole selection based on local codes and standards for the job location.

STERNER LIGHTING • 701 Millennium Blvd • Greenville, SC 29607 • TEL 864.678.1000 FAX 864.678.1417 • www.sternerlighting.com 4/11

ordering e xa mple

ordering sequence

(1) (2) (3) (4)ESSS-10-40-1-AS1-BL-Q18

ESSS-10-40-1 10', 4" dia, 11 guageESSS-12-40-1 12', 4" dia, 11 guageESSS-16-40-1 16', 4" dia, 11 guageESSS-20-40-1 20', 4" dia, 11 guageESSS-25-50-7 25', 4" dia, 7 guageESSS-30-50-7 30', 4" dia, 7 guage

AS(X)1 Side-singleBS(X)1 Double at 90 degCS(X)1 Double at 180 degDS(X)1 Triple at 90 degFS(X)1 Quad at 90 deg

Q18 15A GFI receptacle and cover

BL BlackDB Dark BronzeWH WhiteGR GrayPS Natural AluminumCC Custom color

1 2 3 4

POLE CAT. # MOUNTING FINISH OPTIONS

PoLE SHAFtThe pole shaft is manufactured from a single piece of hot-rolled steel with an invisible single longitudinal weld (on a finished pole). Square pole has four soft radius corners.

BASEThe base plate is hot-rolled steel attached by two continuous welds. A two-piece steel base cover is provided for attachment after the pole is installed.

AnCHoR BoLtSEach pole is supplied with four galvanized steel anchor bolts and eight hex nuts and washers. Bolt circle templates are included. Advance shipments of anchor bolts and templates are available upon request.

WiRE ACCESSWireway access is provided via hand holes. Hand holes are 3” x 5” and centered 12” above the base of the pole. A steel hand hole cover is included.

PoLyEStER FiniSHPoles are cleaned with a solvent to remove grease and oil and sandblasted before finished with a standard polyester coating. Finish is U.V. resistant and capable of withstanding continuous exposure to exterior conditions. Standard colors are dark bronze, black, white, gray and natural aluminum. Custom powder and wet finishes are available (contact factory).

40'

35'

30'

25'

20'

15'

10'

5'

0'

ESSS CRTS/ERTS ESSS ESTS

16'

*Standard pole heights per style. Additional sizes may be available, contact factory for details.

20'

25'

12'

16'

20'

25'

30'

35'

39'

12'

16'

20'

25'

30'

10'

20'

25'

30'

35'

40'

esss steel pole written specif icat ion

BK(7)

0.120(3)

4.0(2)

28(4)

P(5) (6)

PRP(1)

SSS20

(7)

DF Duplex Groundfault Receptacle(15 amp, mounted 24" above grade)

BN B

N Not Required

reak-Away Banner Arm Coupling(can use 0.75" or 1.25" pipe arms)(consult factory for specific ordering info.)

(4)

SQUAREDIMENSION

See PoleData Table

Below

14"

14.1

10.7

7.9

3.9

1.3

10.6

6.2

PolyurethaneFinish

BK Black

BZ Dark Bronze

WH White

AL Natural Aluminum

NS Non-Standard Finish(consult factory)

NOTES:1) SSS10,12.5,15, 20, & 25 are available in 0.120" wall standard.2) SSS25 is available in both 0.120" & 0.188" wall standard.3) SSS30 available only in 0.188" wall standard.

4) '10' applies to both arm & yoke mount fixtures.5) See below table for dimensions & bolt info.

Squa

re D

imen

sion

4.0"

4.0"

4.0"

4.0"

4.0"

5.0"

5.0"

11 ga.

11 ga.

11 ga.

11 ga.

11 ga.

7 ga.

7 ga.

NOTES: Responsibility lies with the specifier for correct pole selection based on local codes and standards for the job location.

10

SSs – SQ U AR E ST R AI G H T ST E E L P O L E SO R D E R E X A M P L E

O R D E R I N G S E Q U E N C E

P O L E D A T A

12"

2

ESSS - Square Straight Steel PolesPOLE OPTIONS AND ANCHOR BOLTS

Follow the logic below when ordering location specific options. For each option, include its orientation (in degrees) and its height (in feet). Example: Option Q18 should be ordered as:

ESSS-20-40-1-AS1-DB-Q18-0-15 (15A GFI receptacle and cover on the hand hole/arm side of pole, 15 feet up from the pole base)

Square Straight and Tapered Poles

Round Straight and Tapered Steel Poles only

Anchor boltlocation in

relationto shaftrotation



Engineering offooting by others

Bolt projection

Foundation level

Grout after pole is set and plumbed

Hex nutPlain washer

Grout finish gradeBase plate

Plain washer

Hex nutAnchor rod

Hand hole Hand hole

(Excluding CRTS)

(CRTS)

Bolt Circle

Bolt Square

StAnDARD AnCHoR BoLtS(Included with pole purchase)tAB-30-M38 3/4 x 30 x 3” (Galvanized) qty: 4tAB-36-M38 1 x 36 x 4” (Galvanized) qty: 4

REPLACEMEnt nut/WASHER Kit80033249902 3/4” TAB30 set80033259902 1” TAB36 set

note: Fabricated from high tensile steel, each anchor bolt has two nuts and two washers. Galvanized anchor bolts are hot-dipped. (Galvanizing includes threaded portion plus six inches minimum.) Anchor bolt template included with pole purchase.

90°

180°

270°

0° Hand hole at 0˚ orientation

Height of option (in feet)

AnCHoR BoLt DEtAiL BASE DiAGRAM oPtion oRiEntAtion

PoLE BASE CovERSCatalog number Description

Pole Base Covers for Square PolesSBC-4-XX 10 1/2” Sq x 5” Deep (use on 4” square poles)SBC-4L-XX 12 1/4” Sq x 5” Deep (use on 4” square poles)SBC-5-XX 12 1/4” Sq x 5” Deep (use on 5” square poles)

In the interest of continuous product improvement, Sterner Lighting reserves the right to change specifications without notice.

701 Millennium Blvd • Greenville, SC 29607 • TEL 864.678.1000 FAX 864.678.1417 • www.sternerlighting.com

PoLE DRiLLinG / HAnD HoLE oRiEntAtion

STREET

BASE

LUMINAIRE(10)SINGLE

CURB

ARMHAND HOLEPOLE

HANDHOLE

TOP VIEW (10)ANCHOR BASE - SINGLE LUMINAIRE

STREET

BASE

LUMINAIRE(10)SINGLE

CURB

ARMHINGE PINPOLE

TOP VIEW (10)HINGE BASE - SINGLE LUMINAIRE

STREET

BASE

LUMINAIRE(10)SINGLE

CURB

ARMHINGE PINPOLE


STREET

BASE

LUMINAIRE(28)2 @ 180°

CURB CURB

ARMHAND HOLEPOLE

HINGE PIN

HINGE PIN

TOP VIEW (28)ANCHOR BASE - 2 @ 180° LUMINAIRE

STREET

BASE


ARMHAND HOLEPOLE

TOP VIEW (28)HINGE BASE - 2 @ 180° LUMINAIRE

STREET

BASE


CURB

ARMHINGE PINPOLE


STREET

CURB

STREET STREET

CURB CURB

BASE


ARM

HAND HOLEPOLE

BASE

HINGE PIN

BASE

ARM ARM

HAND HOLEPOLE

HINGE PIN

STREET

CURB

BASE

ARM

HAND HOLEPOLE

POLE

STREET

CURB

HINGE PIN

BASE

ARM

POLE

HINGE PIN

STREET

CURB

BASE

ARM

HAND HOLEPOLE

STREET

CURB

HINGE PIN

BASE

ARM

POLE



TOP VIEW (29)HINGE BASE W/ HH - 2 @ 90° LUMINAIRE



STREET

CURB

BASE


ARM

HAND HOLEPOLE






STREET

CURB

BASE


ARM

HAND HOLEPOLE






STREET

CURB

BASE


ARM

HAND HOLE HAND HOLE HINGE PIN

STREET

CURB

BASE

ARM






POLE POLE

HINGE PIN

STREET

CURB

BASE

ARM

POLE

STREET

BASE

LUMINAIRE(10)SINGLE

CURB

ARMHAND HOLEPOLE

HANDHOLE


STREET

BASE

LUMINAIRE(10)SINGLE

CURB

ARMHINGE PINPOLE


STREET

BASE

LUMINAIRE(10)SINGLE

CURB

ARMHINGE PINPOLE


STREET

BASE


CURB CURB

ARMHAND HOLEPOLE

HINGE PIN

HINGE PIN


STREET

BASE


ARMHAND HOLEPOLE


STREET

BASE


CURB

ARMHINGE PINPOLE


STREET

CURB

STREET STREET

CURB CURB

BASE


ARM

HAND HOLEPOLE

BASE

HINGE PIN

BASE

ARM ARM

HAND HOLEPOLE

HINGE PIN

STREET

CURB

BASE

ARM

HAND HOLEPOLE

POLE

STREET

CURB

HINGE PIN

BASE

ARM

POLE

HINGE PIN

STREET

CURB

BASE

ARM

HAND HOLEPOLE

STREET

CURB

HINGE PIN

BASE

ARM

POLE






STREET

CURB

BASE


ARM

HAND HOLEPOLE






STREET

CURB

BASE


ARM

HAND HOLEPOLE






STREET

CURB

BASE


ARM


STREET

CURB

BASE

ARM






POLE POLE

HINGE PIN

STREET

CURB

BASE

ARM

POLE

AnCHoR BASE - SinGLE LuMinAiRE

MOUNTING CONFIGUrATION ASX

MOUNTING CONFIGUrATION FSX MOUNTING CONFIGUrATION DSX

P

10

28

29

39

49

STREET

BASE

LUMINAIRE(10)SINGLE

CURB

ARMHAND HOLEPOLE

HANDHOLE


STREET

BASE

LUMINAIRE(10)SINGLE

CURB

ARMHINGE PINPOLE


STREET

BASE

LUMINAIRE(10)SINGLE

CURB

ARMHINGE PINPOLE


STREET

BASE


CURB CURB

ARMHAND HOLEPOLE

HINGE PIN

HINGE PIN


STREET

BASE


ARMHAND HOLEPOLE


STREET

BASE


CURB

ARMHINGE PINPOLE


STREET

CURB

STREET STREET

CURB CURB

BASE


ARM

HAND HOLEPOLE

BASE

HINGE PIN

BASE

ARM ARM

HAND HOLEPOLE

HINGE PIN

STREET

CURB

BASE

ARM

HAND HOLEPOLE

POLE

STREET

CURB

HINGE PIN

BASE

ARM

POLE

HINGE PIN

STREET

CURB

BASE

ARM

HAND HOLEPOLE

STREET

CURB

HINGE PIN

BASE

ARM

POLE






STREET

CURB

BASE


ARM

HAND HOLEPOLE






STREET

CURB

BASE


ARM

HAND HOLEPOLE






STREET

CURB

BASE


ARM


STREET

CURB

BASE

ARM






POLE POLE

HINGE PIN

STREET

CURB

BASE

ARM

POLE

AnCHoR BASE - 2 @ 180˚ LuMinAiRE

MOUNTING CONFIGUrATION CSX

P

10

28

29

39

49

STREET

BASE

LUMINAIRE(10)SINGLE

CURB

ARMHAND HOLEPOLE

HANDHOLE


STREET

BASE

LUMINAIRE(10)SINGLE

CURB

ARMHINGE PINPOLE


STREET

BASE

LUMINAIRE(10)SINGLE

CURB

ARMHINGE PINPOLE


STREET

BASE


CURB CURB

ARMHAND HOLEPOLE

HINGE PIN

HINGE PIN


STREET

BASE


ARMHAND HOLEPOLE


STREET

BASE


CURB

ARMHINGE PINPOLE


STREET

CURB

STREET STREET

CURB CURB

BASE


ARM

HAND HOLEPOLE

BASE

HINGE PIN

BASE

ARM ARM

HAND HOLEPOLE

HINGE PIN

STREET

CURB

BASE

ARM

HAND HOLEPOLE

POLE

STREET

CURB

HINGE PIN

BASE

ARM

POLE

HINGE PIN

STREET

CURB

BASE

ARM

HAND HOLEPOLE

STREET

CURB

HINGE PIN

BASE

ARM

POLE






STREET

CURB

BASE


ARM

HAND HOLEPOLE






STREET

CURB

BASE


ARM

HAND HOLEPOLE






STREET

CURB

BASE


ARM


STREET

CURB

BASE

ARM






POLE POLE

HINGE PIN

STREET

CURB

BASE

ARM

POLE

AnCHoR BASE - 2 @ 90˚ LuMinAiRE

MOUNTING CONFIGUrATION BSX

P

10

28

29

39

49

AnCHoR BASE - 3 @ 90˚ LuMinAiRE AnCHoR BASE - 4 @ 90˚ LuMinAiRE

P

10

28

29

39

49

P

10

28

29

39

49

Square Straight and Tapered Poles

Round Straight and Tapered Steel Poles only





Engineering offooting by others

Bolt projection

Foundation level

Grout after pole is set and plumbed

Hex nutPlain washer

Grout finish gradeBase plate

Plain washer

Hex nutAnchor rod

Hand hole Hand hole

(Excluding CRTS)

(CRTS)

STREET

BASE

LUMINAIRE(10)SINGLE

CURB

ARMHAND HOLEPOLE

HANDHOLE


STREET

BASE

LUMINAIRE(10)SINGLE

CURB

ARMHINGE PINPOLE


STREET

BASE

LUMINAIRE(10)SINGLE

CURB

ARMHINGE PINPOLE


STREET

BASE


CURB CURB

ARMHAND HOLEPOLE

HINGE PIN

HINGE PIN


STREET

BASE


ARMHAND HOLEPOLE


STREET

BASE


CURB

ARMHINGE PINPOLE


STREET

CURB

STREET STREET

CURB CURB

BASE


ARM

HAND HOLEPOLE

BASE

HINGE PIN

BASE

ARM ARM

HAND HOLEPOLE

HINGE PIN

STREET

CURB

BASE

ARM

HAND HOLEPOLE

POLE

STREET

CURB

HINGE PIN

BASE

ARM

POLE

HINGE PIN

STREET

CURB

BASE

ARM

HAND HOLEPOLE

STREET

CURB

HINGE PIN

BASE

ARM

POLE






STREET

CURB

BASE


ARM

HAND HOLEPOLE






STREET

CURB

BASE


ARM

HAND HOLEPOLE






STREET

CURB

BASE


ARM


STREET

CURB

BASE

ARM






POLE POLE

HINGE PIN

STREET

CURB

BASE

ARM

POLE

wire access sss -...

Documents