wire rope · pdf fileanchor pendant sockets closed spelter sockets open spelter sockets open...

20
Anchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

Upload: lamnhi

Post on 06-Mar-2018

275 views

Category:

Documents


12 download

TRANSCRIPT

Page 1: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

Anchor Pendant Sockets

Closed Spelter Sockets

Open Spelter Sockets

Open Wedge Sockets

Closed Wedge Sockets

WIRE ROPE FITTINGSSILVERLINE Products

Page 2: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

2

FOR MORE INFORMATION SEE OUR WARNINGS AND INSTRUCTIONS FOR USE

SILVERLINE Products

Global Rope FittingsGlobal Rope Fittings GmbH is the producer of

the SILVERLINE Sockets.

Based on our long experience and our knowledge as

a producer, we bring our best products to the crane,

marine and offshore markets.

As a leading producer of sockets, we are confident

we can find a suitable solution for any problem you

may have.

We believe that our philosophy of partnership with our

customers makes us a reliable supplier and partner.

Introduction

Page 3: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

3

FOR MORE INFORMATION SEE OUR WARNINGS AND INSTRUCTIONS FOR USE

SILVERLINE Products

QualityAll sockets are made from high-quality cast steel and are

suitable for low temperature environments. The material

used has an impact value of > 42 J at –20 °C Charpy-V.

All SILVERLINE Sockets can be supplied with a

manufacturer’s certificate and a material certificate

stating rope diameter, MBL, mechanical properties

and PO number. Each socket can be subjected to

individual magnetic particle and ultrasonic

inspections by an independent agency.

DesignThe SILVERLINE Sockets have some progressive new

design details. The Open Wedge series has extra long

jaws for quick assembly. The wedges have a square

bottom section to prevent damage to wedge and

rope during removal. The Open and Closed Spelter

Sockets have a cylindrical base end for better vertical

alignment with the wire rope.

All SILVERLINE Spelter Sockets have a non-rotation

device to prevent the cone from rotating and backing

out during transport and/or assembly.

FinishAll SILVERLINE sockets have a standard finish in

dark grey coating (RAL 7024), or can be supplied

in hot dipped galvanized finish.

Global Rope Fittings the best choice for Sockets

Page 4: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

4

FOR MORE INFORMATION SEE OUR WARNINGS AND INSTRUCTIONS FOR USE

SILVERLINE Products

All SILVERLINE Sockets can be supplied with

a complete certificate comprising:

❚ Declaration of compliance according to EN 10204-2.1, containing,

• Certificate number

• Wire rope diameter

• Minimum Breaking Load (MBL)

• Quantity

• Order number

❚ EC Declaration according to Machine Directive 2006/42/EC

❚ Material certificate according to EN 10204-3.1 or EN 10204-3.2

❚ Manufacturer’s test certificate according to ILO Convention No. 152

❚ NDE inspection reports

❚ Inspection certificate issued by official classification body

Identification / MarkingEach socket is clearly marked with heat number, rope size, type number

and logo as showed in the pictures below.

Certificates and Documents

heat number rope size type number and logo

This sub-certificate is only valid in connection with the main certificate 88313-2010-AQ-GER-TGA.

Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.

DNV Zertifizierung und Umweltgutachter GmbH, Schnieringshof 14, 45329 Essen, Tel: +49 201 7296 300 Fax: +49 201 7296 333 - www.dnv.de/zertifizierung

DET NORSKE VERITAS MANAGEMENT SYSTEM CERTIFICATE

Certificate No.: 88313CC1-2010-AQ-GER-TGA This is to certify that

Global Rope Fittings GmbH Stockholmer Straße 11 48455 Bad Bentheim - Germany has been found to conform to the Management System Standard ISO 9001:2008 This certificate is valid for the following product or service ranges:

Purchasing, Sales, Assembly and Distribution of Wire Rope Fittings

Initial Certification date: 28.10.2011

TGA-ZM-04-92-00

Place and date: Essen, 28.10.2011

This certificate is valid until: 27.10.2014 for the Accredited Unit: DNV ZERTIFIZIERUNG UND UMWELTGUTACHTER GMBH

The audit has been performed under the supervision of

Peter Theunissen

Nikolaus Kim

Lead Auditor

Management Representative

Page 5: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

5

FOR MORE INFORMATION SEE OUR WARNINGS AND INSTRUCTIONS FOR USE

SILVERLINE Products

Open Spelter SocketsAvailable for wire rope sizes from ø 6 mm to ø 115 mm

(1/4” to 4 1/2”) with an efficiency rating of 100%.

Standard version with pin and cotter pin. Also available

with bolt, nut and cotter pin.

Closed Wedge SocketsAvailable in sizes from ø 17 mm to ø 86 mm (3/4” to 3 1/4”) with

an efficiency rating of 80%.

Anchor Pendant SocketsAvailable for wire rope sizes from ø 37 mm to ø 115 mm

(1 1/2” to 4 1/2”) with an efficiency rating of 100%.

The perfect socket for anchor lines.

Closed Spelter SocketsAvailable for wire rope sizes from ø 6 mm to ø 115 mm

(1/4” to 4 1/2”) with an efficiency rating of 100%.

Open Wedge SocketsAvailable in sizes from ø 7 mm to ø 86 mm (5/16” to 3 1/4”)

with an efficiency rating of 80%. Standard version with pin

and cotter pin. Also available with bolt, nut and cotter pin.

Page 6: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

6

FOR MORE INFORMATION SEE OUR WARNINGS AND INSTRUCTIONS FOR USE

SILVERLINE Products

GeneralThe SILVERLINE sockets are the strongest on today’s market and the best

choice for a wire rope termination, but the pouring, use and inspection are the

responsibility of the user.

Always inspect a socket, wedge, pin or bolt before using. Do not modify any part.

Never do any repairs or welding on a SILVERLINE socket. For repairs contact

your supplier.

Do not use sockets after being overloaded, side-loaded or shock-loaded. Never

use sockets showing cracks or any signs of wear to the bow, pin holes or pins.

Incorrect use of sockets may create an unsafe situation and this may result in

death or serious injury to personnel and/or damage to equipment.

Spelter SocketsSpelter socket terminations have an efficiency of 100%, based on the strength

of the wire rope, but this is limited by the minimum breaking load of the socket.

When using white metal, never expose a socket to a temperature of more than

300 °C (570 °F).

When using synthetic resin, read the instructions, instructions for use and

warnings provided by the manufacturer.

Sockets poured with synthetic resin must not be subjected to temperatures

exceeding 115 °C (240 °F).

Make sure the broomed wires are uniformly spaced in the basket, with the

wire ends at the top of the basket. The axes of the wire rope and the socket must

be aligned.

Seal the base of the socket prior to pouring to prevent resin leakage.

Poured sockets should not be moved for at least 15 minutes after the resin

in the socket has gelled.

If possible we recommend the assembly to be proof-tested at 2/5 of the working

load limit at least 1 hour after the resin in the socket has gelled.

Never use a wire rope with a diameter that deviates from that stated in the tables.

Warnings and instructions for use

Page 7: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

7

FOR MORE INFORMATION SEE OUR WARNINGS AND INSTRUCTIONS FOR USE

SILVERLINE Products

Wedge SocketsWedge sockets have an efficiency of 80% based on the minimum breaking load (MBL) of the wire rope.Do not interchange SILVERLINE wedge sockets and wedges with non SILVERLINE wedge sockets.Select the wedge socket for the correct wire rope size. Do not mix wedges with different models or sizes.Always mount the loaded wire rope in the centre line of the pin (see figure 1).The length of the dead end should have a minimum of 6 wire rope diameters but also a minimum of 150 mm.Secure the dead end with a wire rope clip. Do not attach it to the loaded wire rope (see figure 3).After the first load, check that the wire rope and wedge are fully seated in the socket, as the load may slip if the wedge socket is not properly installed.The socket has to be fixed against rotation.

CORRECT INCORRECT INCORRECT

1 2 3

Page 8: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

8

FOR MORE INFORMATION SEE OUR WARNINGS AND INSTRUCTIONS FOR USE

SILVERLINE Products

Anchor Pendant Sockets

ø ø

Available for wire rope sizes from ø 37 mm to ø 115 mm (1 1/2” to 4 1/2”) with an efficiency rating of 100%. The perfect socket for anchor lines.

Page 9: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

9

FOR MORE INFORMATION SEE OUR WARNINGS AND INSTRUCTIONS FOR USE

SILVERLINE Products

Model nr. MBL

(Mtons) mm inch Weight (LBS)

Dimensions (Inch)for wire ø

A B C D E F G ø H ø K

Approximate resin volume

(cc)

Anchor Pendant Socket. INCH DIMENSIONS.

MBL = Minimum Breaking Load.Our standard sockets are delivered in dark grey coating (RAL 7024). Hot dipped galvanized is also available. All socketscan be provided with Declaration of compliance according EN 10204-2.1. Material certificate according EN 10204-3.1and EC Declaration according machine directive 2006/42/EC.

APS 517 160 37-42 11/2-15/8 500 12,16 6,38 4 1,73 1,57 6 3,62 1,8 2,64 24 APS 519 200 43-48 13/4-17/8 700 14,5 7,6 4,84 2,1 1,9 6,93 4,33 2,1 2,91 36 APS 522 250 49-54 2-21/8 1250 16 8,27 5,5 2,28 2 7,87 4,92 2,3 3,27 48 APS 524 320 55-60 21/4-23/8 1450 17,8 9,06 6,18 2,56 2,28 8,9 5,5 2,7 3,78 68 APS 526 400 61-68 21/2-25/8 1850 19,6 9,84 6,85 2,95 2,6 9,84 6,14 3 4,2 92 APS 527 500 69-75 23/4-27/8 2300 21,7 11 7,5 3,15 2,76 10,8 6,73 3,15 4,5 119 APS 528 600 76-80 3-31/8 3400 23,3 12,16 7,7 3,38 3 11,4 7,1 3,5 4,9 155 APS 529 700 81-86 31/4-33/8 4100 25,3 13,1 8,3 3,94 3,54 12 7,4 3,7 5,2 187 APS 530 800 87-93 31/2-35/8 5200 27 14,2 8,7 4,1 3,74 13,1 8,25 3,9 5,6 260 APS 531 900 94-102 33/4-4 7700 28,4 14,8 9,25 4,4 4 14,4 7,7 4,33 6,2 310 APS 533 1000 108-115 41/4-41/2 10500 32,2 16,5 10,6 5 4,4 16 9,5 5 7,1 400

Model nr.

APS 517 160 37-42 1 1 / 2 -1 5 / 8 500 309 162 103 44 40 152 92 46 67 11APS 519 200 43-48 1 3 / 4 -1 7 / 8 700 369 193 123 53 48 176 110 53 74 16

MBL (Mtons) mm inch

Weight (kg)

Dimensions (mm) for wire ø

A B C D E F G ø H ø K

Approximate resin volume

(cc)

APS 522 250 49-54 2-2 1 / 8 1250 408 210 140 58 52 200 125 58,5 83 22APS 524 320 55-60 2 1 / 4 -2 3 / 8 1425 452 230 157 65 58 226 140 68 96 31APS 526 400 61-68 2 1 / 2 -2 5 / 8 1850 499 250 174 75 66 250 156 76 107 42APS 527 500 69-75 2 3 / 4 -2 7 / 8 2300 551 280 191 80 70 275 171 80 115 54APS 528 600 76-80 3-3 1 / 8 3400 591 309 196 86 76 290 180 89 125 70APS 529 700 81-86 3 1 / 4 -3 3 / 8 4100 643 332 211 100 90 304 188 94 133 85APS 530 800 87-93 3 1 / 2 -3 5 / 8 5200 685 360 220 105 95 332 210 99 142 118 APS 531 900 94-102 3 3 / 4 -4 7700 722 375 235 112 101 366 220 110 157 142

41/4-41/2 10500 818 420 270 126 112 405 240 128 180 180APS 533 1000 108-115

Anchor Pendant Socket. METRIC DIMENSIONS.

Page 10: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

10

FOR MORE INFORMATION SEE OUR WARNINGS AND INSTRUCTIONS FOR USE

SILVERLINE Products

Closed Spelter Sockets

ø ø

Available for wire rope sizes from ø 6 mm to ø 115 mm (1/4” to 4 1/2”) with an efficiency rating of 100%.

Page 11: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

11

FOR MORE INFORMATION SEE OUR WARNINGS AND INSTRUCTIONS FOR USE

SILVERLINE Products

Model nr.MBL

(Mtons

Weight(LBS)

Dimensions (inch)

A B C D E F G ø H ø K

Approximateresin volume

(cc)

StructuralStrandø inch

Wire Ropeø inch

Closed Spelter Socket. INCH DIMENSIONS.

MBL = Minimum Breaking Load.Our standard sockets are delivered in dark grey coating (RAL 7024). Hot dipped galvanized is also available. All socketscan be provided with Declaration of compliance according EN 10204-2.1. Material certificate according EN 10204-3.1and EC Declaration according machine directive 2006/42/EC.

CSS 296 8 1/4 - 10 4 1,81 1,77 0,43 0,55 1,5 0,87 0,39 0,78 0,7 CSS 297 12 3/8 - 20 4,7 2,16 2 0,55 0,69 1,74 0,95 0,53 1,02 1,1 CSS 298 20 7/16 -1/2 - 35 5,5 2,52 2,32 0,67 0,91 2,1 1,18 0,6 1,18 1,6 CSS 299 25 9/16 -5/8 1/ 2 50 6,4 3 2,56 0,83 1,02 2,52 1,42 0,73 1,52 3 CSS 200 40 3/4 9/16 -5/8 80 7,6 3,5 3,07 1,06 1,26 2,95 1,65 0,89 1,81 4,5 CSS 201 55 7/8 11/16 -3/4 125 8,8 4 3,54 1,3 1,5 3,54 1,97 1,05 2,17 8 CSS 204 80 1 13/16 -7/8 160 10 4,5 4,05 1,42 1,77 4 2,24 1,16 2,44 11 CSS 207 100 11/8 1516 -1 210 11,1 5 4,6 1,54 2 4,5 2,56 1,39 2,76 15 CSS 212 130 11/4-18/8 11/16-11/8 350 12,3 5,5 5,12 1,7 2,24 5 2,8 1,57 3,27 23 CSS 215 160 11/2 13/16-11/4 425 14,1 6 6,1 2 2,48 5,6 3,1 1,75 3,5 33 CSS 217 200 15/8 15/16-13/8 500 15,4 6,5 6,7 2,13 2,76 5,9 3,2 1,9 3,8 41 CSS 219 250 13/4-17/8 17/16-15/8 700 17,4 7,5 7,8 2,17 3 6,7 3,74 2,1 4,4 61 CSS 222 300 2-21/8 111/16-13/4 1250 19,8 8,5 8,5 2,4 3,23 7,6 4,37 2,3 4,9 87 CSS 224 375 21/4-23/8 113/16-17/8 1425 21,7 9 9,76 2,87 3,63 8,6 4,92 2,7 5,3 112 CSS 226 450 21/2-25/8 115/16-21/8 1850 23,5 9,76 10,6 3,1 4 9,5 5,5 3,05 5,9 148 CSS 227 500 23/4-27/8 23/16-27/16 2300 25,4 11 11,3 3,1 4,9 10,7 6,3 3,25 6,3 211 CSS 228 600 3-31/8 21/2-25/8 3400 27,1 12 11,7 3,4 5,2 11,5 6,7 3,5 6,7 258 CSS 229 650 31/4-33/8 23/4-27/8 4100 29 13 12,2 3,7 5,7 12,3 7,2 3,75 7,1 312 CSS 230 750 31/2-35/8 3-31/8 5200 31 14 13 4 6,5 13 7,8 3,9 7,9 385 CSS 231 900 33/4-4 31/4-33/8 7700 33,3 15 14 4,3 7 14,3 8,5 4,33 8,5 506 CSS 233 1200 41/4-41/2 33/4-41/4 10500 38 17,3 15,7 5 7,5 16 9,3 5 9,8 695

Closed Spelter Sockets Model nr.

CSS 296 8 6-7 10 102 46 45 11 14 38 22 10 20 0.3CSS 297 12 8-10 20 120 54 52 14 17.5 44 24 13,5 26 0.5

MBL

(Mtons

Weight(kg)

Dimensions (mm)Wire Rope

ø mm A B C D E F G ø H ø K

CSS 298 20 11-13 35 140 64 59 17 23 53 30 15 30 0.7CSS 299 25 14-16

---

50 162 76 65 21 26 67 36 18,5 38.5 1.3CSS 200 40

5518-19 80 194 89 78 27 32 77 42 22,5 46 2.1

CSS 201 20-22 125 224 101 90 33 38 92 50 26,8 55 3.6CSS 204 80

10023-26

12-1314-1618-1920-2224-26

160 253 114 103 36 45 101 57 29,5 62 5.1CSS 207 27-30 210 282 127 116 39 51 114 65 34 70 7CSS 212 130 31-36

37-39160350 312 139 130 43 57 127 71 40 83 10.4

CSS 215 425 358 152 155 51 63 140 80 44,5 90 15CSS 217 200 40-42 500 390 165 171 54 70 148 84 48 97 18.5CSS 219 43-48250 700 443 190 198 55 76 171 95 53 112 27.5CSS 222 300

37549-54 1250 502 216 224 62 82 193 111 58,5 125 39.5

CSS 224 55-60 1425 550 229 248 73 92 219 125 68,5 135 51CSS 226 450 61-68 1850 597 248 270 79 102 241 140 77,5 150 67CSS 227 69-75500 2300 644 279 286 79 124 273 159 83 160 96CSS 228 600 76-80 3400 689 305 298 86 133 292 171 89 170 118CSS 229 81-86650 4100 736 330 311 95 146 311 184 95 180 142CSS 230 750

90087-93 5200 788 356 330 102 159 330 197 99 200 175

CSS 231 94-102 7700 845 381 356 108 178 362 216 110 215 230CSS 233

Approximateresin volume

(cc)

1200 108-115 10500 965 440 400 125 190 405 235 128 250 315

27-2830-3233-3536-4042-4546-4850-5456-6264-6770-7376-8083-9296-108

StructuralStrandø mm

Closed Spelter Socket. METRIC DIMENSIONS.

Page 12: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

12

FOR MORE INFORMATION SEE OUR WARNINGS AND INSTRUCTIONS FOR USE

SILVERLINE Products

Open Spelter Sockets

ø

ø ø

Available for wire rope sizes from ø 6 mm to ø 115 mm (1/4” to 4 1/2”) with an efficiency rating of 100%. Standard version with pin and cotter pin. Also available with bolt, nut and cotter pin.

with pin with bolt

ø ø

ø

Page 13: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

13

FOR MORE INFORMATION SEE OUR WARNINGS AND INSTRUCTIONS FOR USE

SILVERLINE Products

Model nr.MBL

(Mtons

Weight(LBS)

Dimensions (inch)

A B C D E F G ø H ø K ø P

Approximateresin volume

(cc)

StructuralStrandø inch

Wire Rope

ø inch

Open Spelter Socket. INCH DIMENSIONS.

MBL = Minimum Breaking Load.Our standard sockets are delivered in dark grey coating (RAL 7024). Hot dipped galvanized is also available. All socketscan be provided with Declaration of compliance according EN 10204-2.1. Material certificate according EN 10204-3.1and EC Declaration according machine directive 2006/42/EC.

OSS 196 P 8 1/4 - 10 4,13 1,81 1,6 0,75 1,34 0,35 0,71 0,39 0,78 0,69 0,9 OSS 197 P 12 3/8 - 20 4,8 2,16 1,8 0,9 1,57 0,44 0,81 0,53 1,02 0,81 1,8 OSS 198 P 20 7/16-1/2 - 35 5,6 2,52 2 1,1 1,89 0,5 1 0,6 1,18 1 2,4 OSS 199 P 25 9/16-5/8 1/2 50 6,7 3 2,5 1,3 2,2 0,57 1,26 0,73 1,52 1,19 4,2 OSS 100 P 40 3/4 9/16-5/8 80 8,1 3,5 3 1,6 2,76 0,65 1,5 0,89 1,81 1,38 7 OSS 104 P 55 7/8 11/16-3/4 125 9,4 4 3,5 1,9 3,15 0,81 1,75 1,05 2,17 1,63 11,7 OSS 108 P 80 1 13/16-7/8 160 10,7 4,5 4 2,3 4 0,89 2 1,16 2,44 2 18 OSS 111 P 100 11/8 15/16-1 210 12 5 4,5 2,6 4,33 1 2,25 1,39 2,76 2,25 25 OSS 115 P 130 11/4-13/8 11/16-11/8 350 13,3 5,5 5 2,8 4,8 1,1 2,5 1,57 3,27 2,5 35 OSS 118 P 160 11/2 13/16-11/4 425 15,5 6 6,4 3,15 5,52 1,18 3 1,75 3,5 2,75 51 OSS 120 P 200 15/8 15/16-13/8 500 16,3 6,5 6,5 3,35 5,9 1,3 3 1,9 3,8 3 64 OSS 125 P 250 13/4-17/8 17/16-15/8 700 18,4 7,5 7 3,86 6,7 1,53 3,5 2,1 4,4 3,5 95 OSS 128 P 300 2-21/8 111/16-13/4 1250 21,7 8,5 9 4,25 7,3 1,81 4 2,3 4,9 3,75 141 OSS 130 P 375 21/4-23/8 113/16-17/8 1425 23,7 9 10 4,72 8,27 2,1 4,5 2,7 5,3 4,25 190 OSS 132 P 450 21/2-25/8 115/16-21/8 1850 25,7 9,7 10,7 5,23 9,1 2,36 5 3,05 5,9 4,75 260 OSS 135 P 500 23/4-27/8 23/16-27/16 2300 27,4 11 11 5,43 9,45 2,9 5,25 3,25 6,3 5 348 OSS 138 P 600 3-31/8 21/2-25/8 3400 29 12 11,3 5,7 9,84 3 5,75 3,5 6,7 5,25 410 OSS 140 P 650 31/4-33/8 23/4-27/8 4100 31,1 13 11,8 6,3 10,83 3,12 6,25 3,75 7,1 5,5 500 OSS 142 P 750 31/2-35/8 3-31/8 5200 33,4 14 12,5 6,9 11,8 3,25 6,75 3,9 7,9 6 615 OSS 144 P 900 33/4-4 31/4-33/8 7700 36,3 15 13,5 7,8 13,2 3,5 7,5 4,33 8,5 7 825 OSS 146 P 1200 41/4-41/2 33/4-41/4 10500 43,7 17,3 17,7 8,7 14,6 4 8,1 5 9,8 7,7 1150

OSS 196 P 8 6-7 10 105 46 40 19 34 9 18 10 20 17.5 0.4OSS 197 P 12 8-10 20 122 54 45 23 40 11.2 20.6 13.5 26 20.6 0.8OSS 198 P 20 11-13 -

--

35 142 64 51 27 48 12.7 25.6 15 30 25.4 1.1OSS 199 P 25 14-16 50 171 76 63 32 56 14.5 32 18.5 38.5 30 1.9OSS 100 P 40 18-19 80 205 89 76 40 68 16.5 38 22.5 46 35 3.2OSS 104 P 55 20-22 125 238 101 89 48 80 20.5 45 26.8 55 41 5.3OSS 108 P 80 23-26 160 273 114 101 58 98 22.5 51 29.5 62 51 8.4OSS 111 P 27-30100 210 306 127 114 65 110 25 57 34 70 57 11.3OSS 115 P 130 31-36

375 55-60

350 338 139 127 72 124 28 63 40 83 63 16OSS 118 P 160 37-39 425 394 152 162 80 140 30 76 44.5 90 70 23OSS 120 P 200 40-42 500 415 165 165 85 148 33.5 76 48 97 76 29OSS 125 P 250 43-48 700 467 191 178 98 170 39 89 53 112 89 43OSS 128 P 300 49-54 1250 552 216 228 108 186 46 101 58.5 125 95 64OSS 130 P 1425 603 229 254 120 210 53 113 68.5 135 108 85OSS 132 P 450 61-68

500 69-751850 654 248 273 133 230 60 127 77.5 150 121 119

OSS 135 P 2300 696 279 279 138 240 73 133 83 160 127 158OSS 138 P 600 76-80

650 81-863400 736 305 286 145 250 76 146 89 170 133 186

OSS 140 P 4100 790 330 300 160 275 79 159 95 180 140 227OSS 142 P 750 87-93

900 94-1025200 849 356 318 175 300 82 172 99 200 152 280

OSS 144 POSS 146 P

7700 922 381 343 198 336 89 191 110 215 178 3751200 108-115 10500 1110 440 450 220 370 100 205 128 250 195 525

14-1618-1920-2224-2627-2830-3233-3536-4042-4546-4850-5456-6264-6770-7376-8083-9296-108

12-13

Model nr.MBL

(Mtons

Weight(kg)

Dimensions (mm)

A B C D E F G ø H ø K ø P

Approximateresin volume

(cc)

StructuralStrandø mm

Wire Rope

ø mm

Open Spelter Socket. METRIC DIMENSIONS.

Page 14: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

14

FOR MORE INFORMATION SEE OUR WARNINGS AND INSTRUCTIONS FOR USE

SILVERLINE Products

Open Japanese Sockets

Available for wire rope sizes from ø 15 mm to ø 43 mm (5/8” to 1 3/4”) with an efficiency rating of 100%. Standard with bolt, nut and cotter pin.

with bolt

ø

ø ø

Page 15: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

15

FOR MORE INFORMATION SEE OUR WARNINGS AND INSTRUCTIONS FOR USE

SILVERLINE Products

Model nr.MBL

(Mtons) mm inch

Weight(LBS)

Dimensions (inch)for wire ø

A B C D E F G ø H ø K ø P

Approximateresin volume

(cc)

Open Japanese Socket. INCH DIMENSIONS.

MBL = Minimum Breaking Load.Our standard sockets are delivered in dark grey coating (RAL 7024). Hot dipped galvanized is also available. All socketscan be provided with Declaration of compliance according EN 10204-2.1. Material certificate according EN 10204-3.1and EC Declaration according machine directive 2006/42/EC.

OJS 16 20 15-16 50 7,2 3 3 1,26 2,2 0,5 1,26 0,8 1,5 1 3,8 OJS 18 25 17-18 80 8,15 3,5 3,15 1,5 2,5 0,6 1,5 0,9 1,8 1,1 5,7 OJS 20 30 19-20 125 8,7 3,75 3,35 1,6 2,75 0,65 1,65 1 1,9 1,2 8 OJS 22 36 21-22 160 9,25 4 3,5 1,8 3,15 0,8 1,77 1,2 2,3 1,34 11,2 OJS 24 40 23-24 175 10,4 4,5 4 1,9 3,4 0,9 2 1,26 2,4 1,46 14,8 OJS 25 50 25-26 200 10,9 4,75 4,14 2 3,5 0,9 2 1,34 2,6 1,57 16,5 OJS 28 60 27-28 230 11,8 5 4,5 2,3 4 1 2,25 1,42 2,8 1,7 22 OJS 30 68 29-30 300 12,3 5,3 4,65 2,4 4,1 1 2,25 1,5 3 1,8 24 OJS 32 70 31-32 350 13 5,5 5 2,5 4,3 1,1 2,5 1,61 3,3 1,93 31 OJS 34 90 33-34 400 13,7 5,9 5,1 2,6 4,5 1,1 2,5 1,7 3,3 2 35 OJS 36 100 35-36 450 14,6 6,3 5,4 2,8 4,9 1,2 2,75 1,77 3,5 2,17 42 OJS 38 110 37-38 500 15,3 6,7 5,7 2,9 5 1,2 2,8 1,85 3,5 2,3 48 OJS 40 125 39-40 600 16 16,9 6,1 3 5,1 1,32 3 1,97 3,8 2,4 60 OJS 42 140 41-43 700 16,9 7,5 6,3 3,1 5,4 1,53 3,15 2,1 4 2,6 80

Model nr. MBL

(Mtons) mm inch Weight

(kg)

Dimensions (mm) for wire ø

A B C D E F G ø H ø K ø P

Approximate resin volume

(cc)

Open Japanese Socket. METRIC DIMENSIONS.

OJS 16 20 15-16 50 183 76 75 32 56 13 32 20 39 25 1,7 OJS 18 25 17-18 80 207 89 80 38 64 15 38 23 45 28 2,6 OJS 20 30 19-20 125 220 95 85 40 70 16,5 42 25 48 31 3,6 OJS 22 36 21-22 160 235 101 89 45 80 20,5 45 30 58 34 5,1 OJS 24 40 23-24 175 264 114 101 49 86 22,5 51 32 62 37 6,7 OJS 25 50 25-26 200 276 120 105 51 90 22,5 51 34 65 40 7,5 OJS 28 60 27-28 230 299 127 114 58 100 25 57 36 70 43 10 OJS 30 68 29-30 300 313 135 118 60 104 25 57 38 75 46 11 OJS 32 70 31-32 350 331 139 127 65 110 28 63 41 83 49 14,2 OJS 34 90 33-34 400 347 150 130 67 114 28 63 43 83 52 16 OJS 36 100 35-36 450 370 160 138 72 124 30 70 45 90 55 19 OJS 38 110 37-38 500 389 170 145 74 128 30 72 47 90 58 22 OJS 40 125 39-40 600 406 175 155 76 130 33,5 76 50 97 61 27 OJS 42 140 41-43 700 430 191 160 79 136 39 80 53 100 65 36

Page 16: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

16

FOR MORE INFORMATION SEE OUR WARNINGS AND INSTRUCTIONS FOR USE

SILVERLINE Products

Open Wedge Sockets

Available in sizes from ø 7 mm to ø 86 mm (5/16” to 3 1/4”) with an efficiency rating of 80%. Standard version with pin and cotter pin. Also available with bolt, nut and cotter pin.

with pin with bolt

øø ø

Page 17: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

17

FOR MORE INFORMATION SEE OUR WARNINGS AND INSTRUCTIONS FOR USE

SILVERLINE Products

Open Wedge Socket. INCH DIMENSIONS.

Model nr. MBL

(Mtons) mm inch A D E F G H øP XWeightDimensions (inch)for wire ø

(LBS)

X = depending on the actual wire rope diameter, rope construction and fill factor.MBL = Minimum Breaking Load.Our standard sockets are delivered in dark grey coating (RAL 7024). Hot dipped galvanized is also available. All socketscan be provided with Declaration of compliance according EN 10204-2.1. Material certificate according EN 10204-3.1and EC Declaration according machine directive 2006/42/EC.

OWS 0.25 P 8 7-8 5/16 5,12 0,8 1,34 0,35 0,7 4,3 0,69 1,6 1,6 OWS 0.5 P 12 9-10 3/8 5,9 0,9 1,6 0,43 0,83 4,92 0,81 1,77 2,6 OWS 1 P 20 11-13 1/2 7,2 1,06 1,9 0,5 1 6,14 1 2,36 4,6 OWS 2 P 25 14-16 5/8 8,8 1,26 2,2 0,57 1,26 7,56 1,18 2,56 8 OWS 3 P 40 17-19 3/4 10,7 1,58 2,76 0,65 1,5 9,13 1,38 2,76 14OWS 4 P 55 20-22 7/8 12,3 1,9 3,15 0,81 1,77 10,4 1,6 3,15 22,5 OWS 5 P 80 23-26 1 14,6 2,28 3,94 0,89 2 12,3 2 3,54 35 OWS 6 P 100 27-29 11/8 16,3 2,6 4,33 1 2,25 13,7 2,25 3,94 47,5 OWS 7 P 120 30-32 11/4 17,9 2,8 4,8 1,1 2,5 15,1 2,5 4,33 66 OWS 8 P 130 34-36 13/8 20 3 5,2 1,1 2,75 17 2,5 4,92 79 OWS 9 P 160 37-39 11/2 21,5 3,15 5,5 1,2 3 18,4 2,75 5,5 110 OWS 10 P 200 40-42 15/8 23,2 3,35 5,9 1,3 3 19,85 3 6,1 132 OWS 11 P 250 43-48 1 3/4-17/8 26,5 3,86 6,7 1,53 3,5 22,7 3,5 6,9 198 OWS 12 P 300 49-52 2 28,9 4,25 7,32 1,81 4 24,6 3,75 7,7 275 OWS 13 P 375 54-58 21/4 32,1 4,7 8,26 2,1 4,5 27,4 4,25 8,66 385 OWS 14 P 450 60-68 21/2 37,4 5,24 9,1 2,36 5 32,1 4,75 9,84 550 OWS 15 P 600 72-76 3 41,6 5,7 9,84 3 5,75 35,9 5,25 11 880OWS 16 P 650 81-86 3 1/4-33/8 6,3 10,8 3,1 3,1 6,25 39,4 5,5 13 1150

Open Wedge Socket. METRIC DIMENSIONS.

Model nr.

OWS 0.25 P 8 7 - 8 5 / 16 110 OWS 0.5 P 12 9 - 10 3 / 8 125 OWS 1 P 20 11 - 13 1 / 2 156 OWS 2 P 25 14 - 16 5 / 8 192 OWS 3 P 40 17 - 19 3 / 4 232 OWS 4 P 55 20 - 22 7 / 8 264 OWS 5 P 80 23 - 26

100 27 - 291 312

OWS 6 P 1 1/ 8 348 OWS 7 P 120 30 - 32

130 34 - 361 1 / 4 384

OWS 8 P 1 3 / 8 432 OWS 9 P 160 37 - 39

200 40 - 421 1 / 2 468

OWS 10 P 1 5 / 8 504 OWS 11 P 13 / 4 - 1 7 / 8

31/4 - 33/8

576 OWS 12 P 2 625OWS 13 P 375 54 - 58

450 60 - 682 1 / 4 696

OWS 14 P 2 1 / 2 817 OWS 15 P 600 72 - 76 3 912

20 23 40 20.611 150 45 27 48 25.4 12.7 183 25.6 60 32 56 30 14.5 224 32 65 40 48 58

6880

100

35 41 51

16.5 20.5 22.5

272 312 370

38 45 51

70 80 90

65 7276 80

110 124132140

57 63 63 70

25 28 28 30

413 455 508 548

57 63 70 76

100 110 125 140

85 98

108

150 170 186

76 89 95

33 39 46

589 674 733

76 89

101

155 175 195

120 133 145

210 230 250

108 121 133

53 60 76

816 950

1057

113 127 146

220 250 280

34 17.5 9 130 18 20.5

40 0,71,22,33,6

10,316

21,530 36 50 60 90

125 175 250 400

OWS 16 P 650 81 - 86 1000160 275 140791160 159 330 525

MBL (Mtons) mm inch A D E F G H øP X

Weight (kg)

Dimensions (mm) for wire ø

6,3

250 43 - 48 300 49 - 52

Page 18: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

18

FOR MORE INFORMATION SEE OUR WARNINGS AND INSTRUCTIONS FOR USE

SILVERLINE Products

Closed Wedge Sockets

Available in sizes from ø 17 mm to ø 86 mm (3/4” to 3 1/4”) with an efficiency rating of 80%.

FE

D

G

AH

Page 19: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

19

FOR MORE INFORMATION SEE OUR WARNINGS AND INSTRUCTIONS FOR USE

SILVERLINE Products

Closed Wedge Socket. INCH DIMENSIONS.

Model nr. MBL

(Mtons) mm inch A D E F G H XWeightDimensions (inch)for wire ø

(LBS)

X = depending on the actual wire rope diameter, rope construction and fill factor.MBL = Minimum Breaking Load.Our standard sockets are delivered in dark grey coating (RAL 7024). Hot dipped galvanized is also available. All socketscan be provided with Declaration of compliance according EN 10204-2.1. Material certificate according EN 10204-3.1and EC Declaration according machine directive 2006/42/EC.

CWS 303 40 17-19 3/4 12,5 1,6 1,4 4 1,65 10,9 4 15,5 CWS 304 55 20-22 7/8 14,5 1,8 1,6 4,5 2 12,7 4,3 20 CWS 305 80 23-26 1 16,6 2 1,8 5,1 2,3 14,6 5 31 CWS 306 100 27-29 11/8 18,6 2,3 2 5,9 2,6 16,3 5,5 49 CWS 307 120 30-32 11/4 20,5 2,5 2,15 6,3 2,8 18 6,3 66CWS 308 130 34-36 13/8 22,8 2,6 2,5 6,6 3 20,2 7 84 CWS 309 160 37-39 11/2 24,4 2,8 2,6 6,9 3,2 21,6 7,5 108 CWS 310 200 40-42 15/8 26,2 3,15 2,8 7,7 3,5 23 8,25 145 CWS 311 250 43-48 1 3/4-17/8 29,5 3,5 3,15 8,7 4 26 9,5 240 CWS 312 300 49-52 2 32,3 4 3,5 9,5 4,3 28,3 10,25 310 CWS 313 375 54-58 21/4 35 4,2 3,7 10 4,7 30,8 11 370 CWS 314 450 60-68 21/2 41,1 4,7 4,1 11 5,1 36,4 13 530 CWS 315 600 72-76 3 47,2 5,5 4,7 13 5,9 41,7 15,75 840 CWS 316 650 81-86 3 1/4-33/8 52,8 6,1 5,1 14,8 6,7 46,6 18,7 1000

Closed Wedge Socket. METRIC DIMENSIONS.

Model nr. MBL

(Mtons) mm inch A D E F G H XWeight

(kg)

Dimensions (mm) for wire ø

CWS 303 40 17-19 3/4 317 40 36 100 42 277 100 7 CWS 304 55 20-22 7/8 368 45 40 115 50 323 110 9 CWS 305 80 23-26 1 422 52 45 130 60 370 125 14 CWS 306 100 27-29 11/8 473 58 50 150 65 415 140 22 CWS 307 120 30-32 11/4 519 62 55 160 72 457 160 30CWS 308 130 34-36 13/8 580 66 60 168 76 514 175 38 CWS 309 160 37-39 11/2 620 72 66 175 82 548 290 49 CWS 310 200 40-42 15/8 665 80 72 195 90 585 210 65 CWS 311 250 43-48 1 3/4-17/8 750 90 80 220 100 660 240 110 CWS 312 300 49-52 2 820 100 90 242 110 720 260 140 CWS 313 375 54-58 21/4 890 106 95 255 120 784 280 170 CWS 314 450 60-68 21/2 1045 120 105 280 130 925 330 240 CWS 315 600 72-76 3 1200 140 120 330 150 1060 400 380 CWS 316 650 81-86 3 1/4-33/8 1340 155 130 375 170 1185 475 450

Page 20: WIRE ROPE  · PDF fileAnchor Pendant Sockets Closed Spelter Sockets Open Spelter Sockets Open Wedge Sockets Closed Wedge Sockets WIRE ROPE FITTINGS SILVERLINE Products

THE QUALITY NAME IN ROPE FITTINGS

Stockholmer Strasse 11 ❚ 48455 Bad Bentheim ❚ GermanyT: +49 (0) 5924 29947-0 ❚ F: +49 (0) 5924 29947-29 ❚ E: [email protected]

www.globalropefittings.com

Copyright 2016-3 rev.1, and published by Global Rope Fittings GmbH, Bad Bentheim, Germany. We reserve the right to make amendments on specifications mentioned in the catalogue. Chamber of Commerce Osnabrück; HRB 203937. VAT Number; DE268763009. For general business terms and conditions contact Global Rope Fittings GmbH.