wire rope slings slack block sets - hi-line utility supply hi-line … · blocks, and various...
TRANSCRIPT
HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com 191
BLOCK SETS, HOOKS, SHACKLES, CLIPS
SLACK BLOCK SETS
Block Sets, H
ooks, Shackles &
Clips
6 X 19 IWRC
Capacity in Tons
Cat. No. Dia. Vertical Choker Basket
4-LENGTH-6X19 1/4 .65 .48 1.36-LENGTH-6X19 3/8 1.4 1.1 2.97-LENGTH-6X19 7/16 1.9 1.4 3.98-LENGTH-6X19 1/2 2.5 1.9 5.19-LENGTH-6X19 9/16 3.2 2.4 6.410-LENGTH-6X19 5/8 3.9 2.9 7.812-LENGTH-6X19 3/4 5.6 4.1 1114-LENGTH-6X19 7/8 7.6 5.6 1516-LENGTH-6X19 1 9.8 7.2 20
WIRE ROPE SLINGS SPECIFY LENGTH WHEN ORDERING
• These light, anodized steel shell blocks are fitted with snubbing hooks to hold the load in any position.
• Sheaves are aluminum alloy with all-bronze bushings. • Available with snap hooks or guarded snap hooks.• Available with anchor hook or swivel hook, which
both fit under insulator and engage pin on cross arm.• Rope is 3/8" x 30' three-strand poly which can be
spliced to blocks when specified. Other types of ropes available upon request.
• Max. safe work load is 750 lbs. (All sets)
30' Handline Sets with Standard Snap Blocks
267 268
Cat. No. Rope Block Style Hook 1802-30-SR Poly Std Blocks (267 & 268) Anchor
1802-30S-SR Poly Std Blocks (267 & 268) Swivel 180230SSRN Nylon Std Blocks (267 & 268) Swivel
30' Handline Sets with Guarded Snap Blocks
H267 H268
Cat. No. Rope Block Style Hook
H1802-30-SR Poly Guarded Blocks(H267 & H268) Anchor
H1802-30S-SR Poly Guarded Blocks (H267 & H268) Swivel
H180230SSRN Nylon Guarded Blocks (H267 & H268) Swivel
Replacement RopeCat. No. Description
48502 3/8" x 30' three strand poly ropeNY06-(length) 3/8" three strand nylon rope (specify length)
258 Anchor Hook 259
Swivel Hook
Angle Factor90°85°80°75°70°65°60°55°50°45°40°
1.9962.9848.9659.9397.9063.8660.8192.7660.7071.6428
6 X 37 IWRC(more flexible)
Capacity in Tons
Cat. No. Dia. Vertical Choker Basket
4-LENGTH-6X37 1/4 .65 .48 1.36-LENGTH-6X37 3/8 1.4 1.1 2.97-LENGTH-6X37 7/16 1.9 1.4 3.98-LENGTH-6X37 1/2 2.5 1.9 5.19-LENGTH-6X37 9/16 3.2 2.4 6.410-LENGTH-6X37 5/8 3.9 2.9 7.812-LENGTH-6X37 3/4 5.6 4.1 1114-LENGTH-6X37 7/8 7.6 5.6 1516-LENGTH-6X37 1 9.8 7.2 20
CAUTION: Do Not Exceed Rated Capacities
Sling capacity decreases as the angle from horizontal decreases. Angles of less than 30° are not recommended. A sling capable of lifting 1,000 lbs in a 90° vertical basket hitch, can only lift 866 lbs at a 60° angle. To determine the reduced rating, multiply the sling’s rating by the appropriate factor in this table.
Add "SCH" to Cat. No. for a Sliding Choker Hook
BLOCK SETS, HOOKS, SHACKLES, CLIPS
DOUBLE/TRIPLE SHEAVE BLOCKS
ALUMINUM BLOCKS UTILITY TOWER BLOCK
HANDLINE SETS
NYLON BLOCKS
303J 303M 303KThis light weight, high strength
tower block is made of rugged aluminum alloy. The sheave runs on Bronze Oilite bearings.
A quick opening cross head makes loading lines easy. Line capacity is 7/8”. Safe work load is 2500 lbs.B
lock
Set
s, H
ooks
, Sh
ackl
es &
Clip
s
*Dimensions provided are actual length, not the lift length.Example: A 100' handline set provides 50' of lift.
Handline Set comes with:• 1/2" or 5/8" hi-power three strand rope• (1) 303J Aluminum Block OR
(1) 3550 Nylon Block• (1) HL1 Double Eye Hook spliced on
one end• (1) 470 Snap spliced on other end
Cat. No. Description3550 Nylon Block
3550-1 Nylon BlockA30234 Safety Latch KitA30069 Screw Pin with Keeper
Cat. No. Description303J Aluminum Block303M Aluminum Block303K Aluminum Block6221 Safety Latch Kit
6244-1 Pin & Lanyard
Cat. No. Description404J Utility Tower Block6365 Repl. Pull Pin & Keeper
7506495 Repl. Latch Kit
Block and sheave constructed of rugged nylon fiberglass rein-forced high dielectric material. 1000 lb working load limit. 5/8" diameter line capacity
3550 3550-1 This light weight, heavy duty aluminum alloy block. Aluminum alloy sheave runs on sealed ball bearings. Line capacity is 5/8" dia. Safe working load is 1000 lbs. (at a 3-1 safety factor).
• Bodies are made from high impact, dielectric thermoplastic material
• Hooks have full swivel• Sheaves are made with fiberglass
reinforced nylon material• Working load limit: 2,000 lb
Cat. No. Description11052 2 Sheave Block11051 3 Sheave Block
404J
Handline Set w/ Alum. Block
Handline Set w/ Nylon Block Dimensions*
HSJ08HP-75 HSN08HP-75 1/2" x 75' HSJ08HP-100 HSN08HP-100 1/2" x 100'HSJ08HP-125 HSN08HP-125 1/2" x 125'HSJ08HP-150 HSN08HP-150 1/2" x 150'HSJ10HP-75 HSN10HP-75 5/8" x 75'HSJ10HP-100 HSN10HP-100 5/8" x 100'HSJ10HP-125 HSN10HP-125 5/8" x 125'HSJ10HP-150 HSN10HP-150 5/8" x 150'
Handline Set with Alum. Block
11051 11052
Cat. No. 50061This rope snatch block with an integrated friction bar is used for lowering loads, snubbing loads, and raising loads. It al-lows you to handle loads with greater control. When lowering loads, tension is transferred from the worker to the block. Replaces standard handline blocks, parted blocks, and various snatch blocks.
OX BLOCK
192HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
BLOCK SETS, HOOKS, SHACKLES, CLIPS
193
BLOCK SETS, HOOKS, SHACKLES, CLIPS
LARGE LOCKING LADDER SNAP
SPREADER HOOKCat. No. 3032
This drop-forged,welded hook is designed for use with harnesses. Tensile strength is 2500 lbs.
POLYMER BUCKET HOOKS
Cat. No. 47-222PVC Bucket
hook with a 3” throat for buckets with wide lip. Sold individually.
SWIVEL SNAP HOOKCat. No. 2012Light duty cast zinc hook.Max. safe load is 150 lbs
H.D. SNAP HOOKCat. No. 443AThis drop-forged hook has fixed eye at 90° to hook. Max. safe load is 1500 lbs.
Cat. No. 1706This drop-forged snap hook has locking latch. Works with one hand. Max. safe load is 5,000 lbs.
SWIVEL HOOKCat. No. 259Drop-forged swivel hook. Max. safe load is 750 lbs.
ANCHOR HOOKCat. No. 258
Drop-forged anchor hook. Max. safe load is 750 lbs.
Cat. No. HL22” diameter handline ring.350 lb capacity
SWIVEL SNAP HOOKCat. No. 470
This drop-forged swivel hook has quick acting plunger-style latch. Max. safe load is 750 lbs.
DOUBLE EYE HANDLINE HOOKS
Cat. No. M1849Safe work load 500 lbs.
Cat. No. HL55112-3/8" high
impact polymer hook. Tests show this hook to be virtually unbreakable. Sold individually.
LOCK SNAP HOOK
HANDLINE RING
HANDLINE BLOCKSThese sturdy handline blocks have aluminum alloy frames and forged steel hooks & eyes. Large axles with high-load rated bearings support the fiber-plastic sheave. For 1/2” rope. Max safe load: 450 lbs.
Cat. No. A151-2with Swivel Safety
Hook
Cat. No. A151-Ewith Swivel Eye
Cat. No. HL1Safe work load 500 lbs.
Cat. No. 47-500PVC Bucket
hook with a 3" throat. Sold individually.
DOUBLE/TRIPLE SHEAVE BLOCKS
Block Sets, H
ooks, Shackles &
Clips
Cat. No. 2401-3Fits 3" bucket
lip. Yellow, 11/16" polymer. Maintains its strength through extreme temperatures.
PVC BUCKET HOOKS
Cat. No. 31301Steel hook is designed
to snap over ladder rungs or reinforcement bars. Max safe load is 5,000 lbs. 1” eye, 9 3/4” O.A. length, 2.5” opening, 1lb. 8oz.
BLOCK SETS, HOOKS, SHACKLES, CLIPS
Cat. No. Safe Load
Throat Opng
Eye ID
Wgt(lb)
Latch Kit
320AN-1 1 Ton .94” .75” .6 1096325320AN-1.5 1.5 Ton 1.03” .91” .9 1096374320AN-2 2 Ton 1.06” 1.12” 1.4 1096421320AN-3 3 Ton 1.22” 1.25” 2. 1096468320AN-5 5 Ton 1.5” 1.56” 4.3 1096515320AN-7 7 Ton 1.88” 2” 8.3 1096562320AN-11 11 Ton 2.25” 2.44” 15 1096609
Throat opening is less w/safety latchCarbon hooks available - lower capacity
ALLOY EYE HOOK
WINCH LINE HOOK ALLOY SWIVEL HOOK
QUICK LINK
WIRE ROPE CLIPS
GALVANIZED SNAP HOOK
Cat. No. Safe Load
Throat Opng
Eye ID
Wgt(lb)
Latch Kit
S322AN-1 1 Ton 15/16” 1-1/4” .75 1096325S322AN-1.5 1.5 Ton 1” 1-1/2” 1.25 1096374S322AN-2 2 Ton 1-1/16” 1-3/4” 2.25 1096421S322AN-3 3 Ton 1-7/32” 1-3/4” 2.30 1096468S322AN-5 5 Ton 1-1/2” 2” 4.96 1096515S322AN-7 7 Ton 1-7/8” 2-1/2” 10.29 1096562S322AN-11 11 Ton 2-1/4” 2-3/4” 19.40 1096609S322AN-15 15 Ton 2-1/2” 3-1/8” 23.25 1096657
Throat opening is less w/safety latchCarbon hooks available - lower capacity
Cat. No. Load Limit
Synthetic Rope Size
Wgt(lb)
Latch Kit
S3319-15 1.63 Ton 9/16” - 5/8” 4.2 1096468S3319-25 2.5 Ton 3/4”- 13/16” 8 1096515S3319-45 4.5 Ton 7/8”- 1” 15 1096562
Winch line hook comes with protective spool & shield
SCREW PIN ANCHOR SHACKLE
To order galvanized, replace prefix S with G (example: G209-
04).
Cat. No.
Stock Dia.
Safe Load
Inside Width at Pin
S209-04 1/4” 1/2 T 1/2”S209-05 5/16” 3/4 T 17/32”S209-06 3/8” 1 T 21/32”S209-07 7/16” 1-1/2 T 23/32”S209-08 1/2” 2 T 13/16”S209-10 5/8” 3-1/4 T 1-1/16”S209-12 3/4” 4-3/4 T 1-1/4”S209-14 7/8” 6-1/2 T 1-7/16”S209-16 1” 8-1/2 T 1-11/16”S209-18 1-1/8” 9-1/2 T 1-13/16”S209-20 1-1/4” 12 T 2-1/32”S209-22 1-3/8” 13-1/2 T 2-1/4”
Blo
ck S
ets,
Hoo
ks,
Shac
kles
& C
lips
Stock Dia.
O.A. Length
Throat Opening
Eye I.D.
Safe Load
7/16" 4" 3/4" 3/4" 750 lb9/16" 4-3/4" 13/16" 1-1/8" 1,000 lb
Cat. No. G3315-(dia.)
Cat. No. Stock O.D.
Throat Opening Length O.A.
SWLT7645136 5/16" 5/16" 2-15/16" 1,760 lbT7645146 3/8" 3/8" 3-3/16" 2,200 lbT7645156 1/2" 9/16" 4-/4" 3,300 lb
Clip & Rope Size
Pack per
Carton
Min. No. of Clips
Required1/4" 100 25/16" 100 23/8" 100 27/16" 50 21/2" 50 509/16" 50 505/8" 50 503/4" 25 4
Cat. No. G450-(size)
194HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
Ref No. Cat. No. Style Block
SizeRope Size
SWL lbs
Wgt lbs
Wood Shell Blocks w/Self Lube Bronze Bushed
1
HS21B-4 Single Sheave
4" 1/2" 1,000 1.75HS21B-6 6" 3/4" 1,800 5HS22B-4 Double
Sheave4" 1/2" 1,400 3
HS22B-6 6" 3/4" 2,500 8.5HS23B-4 Triple
Sheave4" 1/2" 1,800 4
HS23B-6 6" 3/4" 3,200 11.5
Steel Shell Blocks w/Self Lube Bronze Bushed
2
HS301B-4 Single Sheave
4" 1/2" 1,100 2.25HS301B-6 6" 3/4" 2,000 5.5HS302B-4 Double
Sheave4" 1/2" 1,600 3.75
HS302B-6 6" 3/4" 3,300 9.25HS303B-4 Triple
Sheave4" 1/2" 2,200 5
Drop Link Blocks w/Self Lube Bronze Bushed
3T385B-6 Wood Shell 6" 7/8" 2,400 7T385B-8 8" 1" 4,800 13
4T390B-6 Wood Shell 6" 7/8" 2,400 7T390B-8 8" 1" 4,800 13
HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com 195
BLOCK SETS, HOOKS, SHACKLES, CLIPSBLOCK SETS, HOOKS, SHACKLES, CLIPS
ROPE BLOCKS
2
3 4
5 6
7 8
1
Ref No. Cat. No. Style Block
SizeRope Size
SWL Ton
Wgt (lbs)
Safety Latch
Snatch Block w/Self-Lube Bronze Bearings
5H418BB-6 Single
Sheave6” 5/8”-3/4” 8 27 1096562
H418BB-8 8” 5/8”-3/4” 8 33 1096562
6H416BB-6 Single
Sheave6” 3/4”-7/8” 12 26 1096609
H416BB-8 8” 3/4”-7/8” 12 33 1096609Heavy Duty Block w/Self-Lube Bronze Bearings
7H420BB-6 Single
Sheave6” 3/4”-7/8” 12 40 1096609
H420BB-8 8” 3/4”-7/8” 15 51 1096609
8 L-45-H Single Sheave 4” 3/8”-1/2” 5 13 1096468
“H” Fitting“S” Fitting
Specify desired fitting prefix when ordering
Block Sets, H
ooks, Shackles &
Clips