wireless fuel level indicator
TRANSCRIPT
![Page 1: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/1.jpg)
1
PROJECT ON DIGITAL FUEL LEVEL INDICATOR
SUBMITED BY- NAME ROLL NO. ARPAN ROY CHOUDHURI 10200312010 SUSANTA GHOSAL 10200112085 ARKAPRABHA PAL 10200312009 SWARNAVA MUKHERJEE 10200312054
KALYANI GOVERNMENT ENGINEERING COLLEGE
30/11/2015
![Page 2: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/2.jpg)
2
ACKNOWLEDGEMENT
We would like to thank our respected project mentor Mr. Sandip Nandi sir for his active co-operation with us in this project .Without his help we wouldn't have even thought of such an interesting topic.
30/11/2015
![Page 3: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/3.jpg)
3
CONTENTS NAME OF THE TOPIC
PAGE NO. Abstract
4 Introduction
5 Why we need it
6 Circuit Diagram
7 Components
8 Block Diagram
9
Power Source 10
Circuit Operation 12
Receiver 13
OP-AMP as Comparator 14
Specifications of LM358 15
Estimated Project Cost 16
Advantage 17
Expected Problems 18
Proposed Solution 19
Block Diagram 20
Reference 22
30/11/2015
![Page 4: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/4.jpg)
4
ABSTRACT
Today in this digitalized world, if the fuel indicator in the automobiles is also made digital it will help to know the amount of fuel available in the fuel tank in the form of digital logic i.e HIGH or LOW.
Communication in a wireless medium between an IR transmitter and receiver is the mechanism which is used to find out the fuel level .
The main feature in this fuel level indicator is that, the reserve condition is pre-informed to the user with an alarm, which helps to tune it to the reserve position before the engine stops and this helps to avoid knocking and engine damage.
30/11/2015
![Page 5: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/5.jpg)
5
INTRODUCTION The aim of our project is to monitor the level of the fuel in the
fuel tank and to automatically indicate the level information . A Fuel indicator is used to alarm the level of fuel in the fuel
tank of a vehicle. It gives an alarm when the fuel in the tank is below the critical
level.
30/11/2015
![Page 6: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/6.jpg)
6
WHY WE NEED IT ?
Monitor the level of fuels inside the fuel meter. Indication of the threshold level of fuel in the tank. Attention. Safe driving.
30/11/2015
![Page 7: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/7.jpg)
7
CIRCUIT DIAGRAM
30/11/2015
![Page 8: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/8.jpg)
8
COMPONENTS
PCB Board { 1 PCS } Bread Board IC 7805 12 volt Battery Battery cap Resistance-
100ohm,330ohm,10k(2 pieces),4.7k
Capacitor 0.33 uF { 2 PCS} Potentiometer
LED of different colours(3 pieces) IR transmitter IR receiver( Photo diode ) OPAMP (LM358) Connecting Wires Soldering kit
30/11/2015
![Page 9: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/9.jpg)
9
BLOCK DIAGRAM
Wireless Medium
30/11/2015
![Page 10: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/10.jpg)
10
Power Source
We need 5 volt Power Supply for our circuit. Most Vehicles run on 12 volt Battery. We may use 7805 voltage regulator IC to convert 5 volt from 12 volt
Battery of the car.
30/11/2015
![Page 11: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/11.jpg)
11
30/11/2015
![Page 12: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/12.jpg)
12
Circuit Operation
The IR transmitter sends an IR radiation in the infrared wavelength region(760 nm).
When the fuel level is above the threshold level the radiated light scatters but when it is below the threshold level it falls upon a receiver.
Due to the falling of light on the receiver a potential difference is created across the ends.
This potential difference is recognized by an Op-Amp as HIGH or LOW. The output of Op-Amp is sent to LED or a Buzzer.
30/11/2015
![Page 13: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/13.jpg)
13
RECEIVER
Here Photo diode is used to capture emitted light of IR LED. A Photo diode is a reverse biased silicon or germanium pn junction in
which reverse current increases when the junction is exposed to light. It is a semiconductor diode that, when exposed to light, generates a
potential difference or changes its electrical resistance. When no light is incident on the pn junction of photo diode, the
reverse current is extremely small. This is called DARK CURRENT.
30/11/2015
![Page 14: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/14.jpg)
14
OPAMP AS COMPARATOR The output of Photo diode is analog voltage. But we need digital output i.e. HIGH or LOW. So we use OPAMP LM358 as comparator.
V0 = High when V1 > V2 V0 = Low when V1 < v2
30/11/2015
![Page 15: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/15.jpg)
15
SPECIFICATIONS OF LM358
The LM-358 IC consists of two independent operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages.
30/11/2015
![Page 16: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/16.jpg)
16
ESTIMATED PROJECT COST
PCB BOARD 40 BREAD BOARD 70 IC 7805 10 OP-AMP LM-358 20 IR TRANSMITTER & RECEIVER 30
L.E.D 15 BUZZER 30 POTENIOMETER 15 RESISTANCE 20 CAPACITOR 10
CONNECTING WIRE 20 BATTERY & CAP 60 SOLDING MECHINE 300 SOLDING WIRE 50 TOTAL COST = 670
30/11/2015
![Page 17: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/17.jpg)
17
Advantages
Easy installation . Low maintenance . Compact elegant design . Can be operated using an external battery supply . Fully automatic, saves man power . Consume very little energy, ideal for continuous operation. Show clear indication of fuel levels .
30/11/2015
![Page 18: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/18.jpg)
18
EXPECTED PROBLEM
The main disadvantage of our circuit is it can only indicate when the fuel level is below the threshold level.
It will not indicate the fuel status when it is decreasing, if the level is above threshold level.
Certainly it will indicate the user about the fuel level , when it will go below threshold.
The user at that moment can be at a situation where he/she can’t get the fuel.
30/11/2015
![Page 19: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/19.jpg)
19
PROPOSED SOLUTION
An array of IR sensors are properly connected in the tank at different depths.
The outputs of the OPAMPs are then applied to a decoder. The decoder outputs are then connected properly to the indicators to
provide the latest status of fuel level to the user. More the No. of sensors in the array ,better is the performance.
30/11/2015
![Page 20: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/20.jpg)
20
BLOCK DIAGRAM
30/11/2015
![Page 21: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/21.jpg)
21
From the block diagram we can have eight output combinations . we will select only the following combinations.
ABC LED COLOUR FUEL STATUS0dd GREEN VERY GOOD1d0 YELLOW MODERATE111 RED FUEL TO BE REFILLED
30/11/2015
![Page 22: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/22.jpg)
22
REFERENCES
http://www.instructables.com/id/Infrared-Transmitter-and-Receiver/ https://learn.sparkfun.com/tutorials/ir-communication http://www.roboticsbible.com/making-of-ir-sensor-module.html www.elprocus.com/infrared-ir-sensor-circuit-and-working/ vepamon.com/products/sensors/lld-indicator/ www.buildcircuit.com/experiment-with-lm358/
30/11/2015
![Page 23: Wireless Fuel Level Indicator](https://reader036.vdocument.in/reader036/viewer/2022081416/58801b1d1a28abbc128b5c1d/html5/thumbnails/23.jpg)
23
THANK YOU
30/11/2015