wireless router misc userguide en

8/17/2019 Wireless Router Misc UserGuide En

1/23

1

LT6605USER GUIDE


2/23

2

Safety Precautions

Read the safety precautions carefully to ensure the correct and safe use of your

wireless device.

Do not switch on your device when the device use is prohibited or

when the device use may cause interference or danger.

Follow the rules or regulations in hospitals and health care facilities.

Switch off your device near medical apparatus.

Switch off your device in an aircraft. The device may cause

interference to control signals of the aircraft.

Switch off your device near high-precision electronic devices. The

device may affect the performance of these devices.

Do not attempt to disassemble your device or its accessories. Only

qualified personnel are allowed to service or repair the device.

Do not place your device or its accessories in containers with strong

electromagnetic field.

Do not place magnetic storage media near your device. Radiation

from the device may erase the information stored on them.

Do not put your device in a high-temperature place or use it in a

place with flammable gas such as a gas station.

Keep your device and its accessories away from children. Do not

allow children to use your device without guidance.

Use only the original power supply.

Observe the laws or regulations on device use. Respect others‟

privacy and legal rights when using your device.

Recommend that you use the equipment in this environment:

Temperature: 0℃ to 35℃. Humidity: 10% to 90%.

Recommend that you save the environment:

Temperature: -10℃ to 55℃. Humidity: 5% to 95%.


3/23

3

Content

Safety Precautions .................................................................................................. 2

1. Overview .............................................................................................................. 4

2. Equipment installation ........................................................................................ 6

3. Description for Client Interface .......................................................................... 7

4. Advanced Settings ............................................................................................ 12

5. Warning and Precautions ................................................................................. 22


4/23

4

1. Overview

The device provides a simple way to use 4G to connect to the Internet with any

WLAN-enabled device and to fulfill needs of sharing your internet connection.

1.1 Introduction

Indicator Description

ID appearance

Interface Specification

NUMBER ITEM INTRODUCTION

1-4 LED Indicator Power, WIFI, Internet, Network

5 SMA SMA connector for external antenna.

6 Power Interface Connect power adapter .

7-8 Ethernet (LAN)

Interface

Connect PC or laptop via Ethernet cable with RJ45

connector .


5/23

5

9 RJ11 Interface Connect voice device via phone line with RJ11

connector .

10 Power Button power on/off device.

11 Reset Restore settings to factory default , restart router .

12 SIM Card Slot Insert SIM card.

(U)SIM Card Installation Instruction

Insert (U)SIM card into the slot.

1.2 System Requirements

Item Description

OperatingSystem

Windows

Windows XP 64bit,32bit(SP3)/Vista

64bit,32bit(SP2)/ Windows7

64bit,32bit(SP1)/Windows 8

Mac X 10.6 or higher, but no higher than X10.9.0

Browser

Internet Explorer Internet Explorer 7.0 or higher

Safari Safari 4.0 or higher


6/23

6

2. Equipment installation

2.1 Connect the Device

Before you want to use your device, please follow the quick steps below to

power up your network:

1. Insert SIM card into SIM slot;

2. Connect power adapter;

3. Turn on the power switch;

4. Connect LTE Wireless Router with your terminal device.

5. Two RJ45 connectors of the device are used to built wired LAN;

The device applications scenes Figure

When internet connection is applied, the device is connected to the Internet through

the built-in LTE modem. All of the two RJ45 connectors will be used to build wired

LAN network. At the same time, network sharing function can be achieved throughWLAN for any terminal devices that support WiFi. Voice service is provided via CS

domain by connect fix-line phone to build-in RJ11 connector.

2.2 Startup

Power on the device

When all the lines installed, turn on the power button to turn on the device.

Restart the device


7/23

7

Some configurations may take effect after system reboot.

Power off the device

After the power is turned off, the device is turned off.

3. Description for Client Interface

3.1 Activate Client

Open the browser, and then enter the IP address http://192.168.1.1 device interface

will open in your browser.

Client default username / password: admin

3.2 Interface Introduction

3.2.1 Client Home page information is divided into two parts:

1. Status information display and advanced settings area.

2. Information Tips Quick Setup area

http://192.168.1.1/http://192.168.1.1/http://192.168.1.1/http://192.168.1.1/


8/23

8

3.2.2 Icons and functions defined:

Status information display and advanced settings area.

Icon Explanation

Theme background selection

Language Settings The client language option, respectively: Arabic/English.

/ Advanced Settings / Home

Help

/User login: user login / logout

The default username / password: admin

Status Information Description

Network signal Signal display

Connection Status

Connected Unconnected



GPRS Connected GPRS Unconnected

EDGE Connected EDGE Unconnected

Roaming or notRoaming On Roaming Off


9/23

9

Information Tips Quick Setup area

No. Icon Explanation

1 (U) SIM card status

2 Network connection status

3 SMS status

4 Traffic Stats

5 WIFI users

6 SSID

7 Connect /

disconnect

Connect / disconnect from the network

3.3 Quick Setup

3.3.1 (U) SIM card

Page displays the (U) SIM card APN list.

And in the profile list, you will see the default and other APN configuration. An

APN (Access Point Name) is a reference to the Internet access point on. Different

APN for the 2G/3G/4G networks may be required.

You can select other APN as default, edit or delete exist ones or create a new

APN configuration (no more than 10 in the list).

Set the Profile Name, APN, User Name, Password, Tel and select Auth. Type

when you want to create a new APN profile.

Note: only input what you have received from your service provider and leave other

fields empty.


10/23

10

3.3.2 Network connection status

This page, you can set up you prefer network connection mode.

Network Mode: Auto, 2G only, 3G only, LTE only.

Roaming: You can choose to turn on or off the roaming function.

Connect Mode: You can choose automatic or manual network connection.

3.3.3 SMS

This function is used SMS device management.

Device: Display the contents of „Inbox', „Outbox' and „Draf t' stored in memory of

the device. User can add, edit, delete, forward, send and other functions by click

icon buttons on configuration page.

(U) SIM: (U) SIM card 'inbox' outbox 'storage content.

The user can click on the interface icon button New SMS, edit, delete, forward,

send, resend and other related functions.

Setting: SMS center number settings, select Settings and SMS storage location.

The device is able to automatically identify SMS center number from the (U) SIM

card you used. You can also manually change this setting. Please contact with

your service provider or network operator for detail of SMS center number.

3.3.4 Traffic Counters

View the network flow information by using the traffic statistic function.

Function were

Total connection time; Data Received; Data Transmitted; Total Data

Clear up the traffic statistic

Click and select „Restart Counter‟.


11/23

11

3.3.5 WIFI connection device list

Equipment listed in the list of equipment related information, including the IP address,

host name, MAC address and connection mode.

3.3.6 SSID

SSID: This name is visible to other WIFI-enabled devices, and is used to identify

your WIFI network. The length of the SSID must be 1-32 characters long

including “_”.

Broadcast: You can choose to 'Enable' or 'Disable'.

Security: This part helps you configure the security of the wireless network.

Select an encryption mode in the list and set your password. If you select "None",

any WIFI-enabled device can connect with the WLAN without the password.

None: Not security. It is not recommended since anyone can access your device

and use your internet connection.

WEP 64 Bit - Shared: Lower security. Works with older and newer WIFI devices.

Recommended only if your devices don't support WPA or WPA2. Shared WEP

uses the same key for encryption and authentication which is considered to be

less secure than open WEP. 5 ASCII characters or 10-digit HEX number needed.



uses the same key for encryption and authentication which is considered to beless secure than open WEP. 13 ASCII characters or 26-digit HEX number

needed.

WEP 64 Bit - Open: Lower security. Works with older and newer WIFI devices.

Recommended only if your devices don't support WPA or WPA2. Open WEP

uses the key only for encryption. 5 ASCII characters or 10-digit HEX number

needed.




needed.

WPA - Personal TKIP: A strong security standard, supported by most WIFI

devices. 8 to 63 ASCII characters needed.

WPA - Personal TKIP/AES: A strong security standard, supported by most WIFI


WPA2 - Personal AES: A stronger, newer security standard. Limited to newer

WIFI devices. 8 to 63 ASCII characters needed.

WPA2 - Personal TKIP/AES: A stronger, newer security standard. Limited to

newer WIFI devices. 8 to 63 ASCII characters needed.

WPA/WPA2 - Personal: WIFI devices that use either WPA or WPA2 can connect


12/23

12

to the device. Supported by most WIFI devices. 8 to 63 ASCII characters needed.

WPA - Enterprise TKIP: A strong security standard, supported by most WIFI


WPA - Enterprise TKIP/AES: A strong security standard, supported by most


WPA2 - Enterprise AES: A stronger, newer security standard. Limited to newer


WPA2 - Enterprise TKIP/AES: A stronger, newer security standard. Limited to


WPA/WPA2 - Enterprise TKIP/AES: WIFI devices that use either WPA or WPA2

can connect to the device. Supported by most WIFI devices. 8 to 63 ASCII

characters needed.

The length of your WIFI password depends on the type that you've selected.

3.3.7 Networking settings

When you click on 'Connect' icon, the software will automatically log on to the network.

Click again to disconnect from the network.

Note:

You can lock the SIM with PIN to protect the device against unauthorized use and

unlock it. The default PIN and PUK are provided by the operator or service

provider. The current PIN status and the rest chances to input PIN and PUK are

displayed in this page.

When the user does not want to continue to use a PIN code, Please select

"Disabled", then enter the correct PIN, click 'Save' to disable PIN lock.

The PUK (an 8-digit code) is required when PIN is input incorrectly 3 times. If the

PUK is wrongly input for continuously 10 times, the card will be damaged. Please

contact the network service provider for details.

4. Advanced Settings

Advanced settings help you to View Help, Wan, configure WIFI, Router and System.

After making some modification, you should click "Save" to save all the settings or you

can select "Cancel" to give up the modification.


13/23

13

4.1 Wan

APN Profile:

This page shows the APN list.

And in the profile list, you will see the default and other APN configuration. An APN

(Access Point Name) is a reference to the Internet access point on. Different APN for

the 2G, 3G and 4G networks may be required.

You can select other APN as default, edit or delete exist ones or create a new APN

configuration (no more than 10 in the list).

Set the Profile Name, APN, User Name, Password, Tel and select Auth. Type when

you want to create a new APN profile.

Note: only input what you have received from your service provider and leave other

fields empty.

Net Search:

The default Network Selection mode is “Automatic”. When click “Refresh”, a network

list will be activated, containing all searched networks. Having selected an available

network from the list, device will register to the selected network.

Net Mode:

This page, you can set up you prefer network connection mode.

Network Mode: Network connection mode, respectively Auto, 2G only, 3G only,

LTE only.

Roaming: You can choose to turn on or off the roaming function. Connect Mode: You can choose Auto or Manual.

PIN:

You can lock the SIM with PIN to protect the device against unauthorized use and

unlock it. The default PIN and PUK are provided by the operator or service provider.

The current PIN status and the rest chances to input PIN and PUK are displayed in

this page.


14/23

14

When the user does not want to continue to use a PIN code, Please select "Disabled",

then enter the correct PIN, click 'Save' to disable PIN lock.

Note: The PUK (an 8-digit code) is required when PIN is input incorrectly 3 times. If

the PUK is wrongly input for continuously 10 times, the card will be damaged. Pleasecontact the network service provider for details.

4.2 WIFI

Basic:

WIFI Switch: You can choose to 'Enable' or 'Disable'.

Wireless Interface: There are different options when you select different

Wireless Interface. 802.11n only,802.11b only,802.11b/g Compatible,802.11b/g/n

Compatible.

Regulatory Domain: Select the domain for the WIFI access point.

WIFI Channel: Different domain has different channels.

Beacon interval: Beacon interval is the frequency of broadcast packets from the

device which is used to synchronize wireless networks. Set lower value for finding

and connecting to the device fast when higher value helps to save power.

SSID:

SSID: This name is visible to other WIFI-enabled devices, and is used to identify

your WIFI network. The length of the SSID must be 1-32 characters long

including “_”.

Broadcast: You can choose to 'Enable' or 'Disable'.

Security:

This part helps you configure the security of the wireless network.

Select an encryption mode in the list and set your password. If you select "None", any

WIFI-enabled device can connect with the WLAN without the password.

None: Not security. It is not recommended since anyone can access your device

and use your internet connection.




less secure than open WEP. 5 ASCII characters or 10-digit HEX number needed.


15/23

15




less secure than open WEP. 13 ASCII characters or 26-digit HEX number

needed.




needed.




needed.

WPA - Personal TKIP: A strong security standard, supported by most WIFI

devices. 8 to 63 ASCII characters needed. WPA - Personal TKIP/AES: A strong security standard, supported by most WIFI


WPA2 - Personal AES: A stronger, newer security standard. Limited to newer


WPA2 - Personal TKIP/AES: A stronger, newer security standard. Limited to


WPA/WPA2 - Personal: WIFI devices that use either WPA or WPA2 can connect

to the device. Supported by most WIFI devices. 8 to 63 ASCII characters needed.

WPA - Enterprise TKIP: A strong security standard, supported by most WIFI


WPA - Enterprise TKIP/AES: A strong security standard, supported by most


WPA2 - Enterprise AES: A stronger, newer security standard. Limited to newer


WPA2 - Enterprise TKIP/AES: A stronger, newer security standard. Limited to


WPA/WPA2 - Enterprise TKIP/AES: WIFI devices that use either WPA or WPA2

can connect to the device. Supported by most WIFI devices. 8 to 63 ASCII

characters needed.The length of your WIFI password depends on the type that you've selected.

WPS:

WPS (WIFI Protected Setup) provide a more intuitive way of wireless

configuration between your device and the wireless client. Please make sure that

the WIFI-enabled devices you want to connect support this function. Enable WPS

firstly before you want to use it. If you select the “PIN” way, input the client‟s PIN


16/23

16

to the "Client PIN" frame. If you select the “PBC” way, press the "WPS" button on

wireless device in 120 seconds to establish WPS connection after you have

pressed the "WIFI/WPS" button on your device or clicked "Save". Click "Save" to

save your settings and start connecting when you select PIN or PBC way. You

can also choose "No Connection" and click "Save" to save your settings without

connecting.

4.3 Router

Basic:

Routing networking basic settings

UPnP: You can choose to 'Enable' or 'Disable'.

L2TP Pass-Through: You can choose to 'Enable' or 'Disable'.

PPTP Pass-Through: You can choose to 'Enable' or 'Disable'.

IPSec Pass-Through: You can choose to 'Enable' or 'Disable'.

LAN:

This part helps you set your internal network for the device which contains Router IP

Address, Subnet Mask, DHCP Server, DHCP IP Pool, and DHCP Lease Time.

IP Address: The router's IP address on the LAN. The default setting is

“192.168.1.1”.

Subnet Mask: The router's internal LAN subnet mask. The default setting is

“255.255.255.0”.

DHCP Server : DHCP Server will automatically assign IP addresses to devices on

the network. You can choose to 'Enable' or 'Disable'.

DHCP IP Pool: Set a range of IP addresses available to access.

DHCP Lease Time: Amount of time that a WIFI-enabled device can use its

assigned IP address before it is required to renew the lease.

DNS Mode: You can choose to 'Auto' or 'Manual'.

Static DHCP:

With DHCP, IP addresses are assigned dynamically; devices typically don't have a

permanent IP address. But sometimes you may want to assign a static IP address to

a device, while still using DHCP for the rest of the devices on your network.

You may want to do this with, for example, a Web server, FTP server, media server.


17/23

17

Hostname: the name of the device that you want to assign IP Address to.

MAC Address: the MAC Address of the device that you want to assign IP

Address to.

IP Address: input the permanent IP Address that you want to assign to the

device.

You can determine to enable it or not, and can also add new client and edit or delete

existing ones.

MAC Filter:

MAC Filter: MAC filtering is used to control specific MAC addresses to access.

You can choose to 'Enable' or 'Disable'.

MAC Filter Mode:

Allow all in list: Only devices in this list are allowed to access the network.

Block all in list: All terminal devices are allowed to access the network except

ones in this list..

MAC Filter List: MAC Address display. You can select to add new configuration

in the list (no more than 10), edit or delete exist ones

Static Routing

Static Routing helps network administrator to manually configure routing

information.

DDNS

DDNS (Dynamic DNS) is a service that maps Internet domain names to IP addresses.

DDNS serves a similar purpose to DNS: DDNS allows anyone hosting a Web or FTP

server to advertise a public name to prospective users.

IP Filter:

IP filtering is used to control specific IP addresses to access .

Select “No Filtering" to disable this function.

Select “Block all in the list" to deny IP addresses that you have set in the IP

filtering list to access.

You can select to add new configuration in the list (no more than 10), edit or delete

exist ones.

http://compnetworking.about.com/od/workingwithipaddresses/g/ip-addresses.htmhttp://compnetworking.about.com/od/workingwithipaddresses/g/ip-addresses.htmhttp://compnetworking.about.com/od/workingwithipaddresses/g/ip-addresses.htmhttp://compnetworking.about.com/od/networkprotocols/g/bldef_ftp.htmhttp://compnetworking.about.com/od/networkprotocols/g/bldef_ftp.htmhttp://compnetworking.about.com/od/networkprotocols/g/bldef_ftp.htmhttp://compnetworking.about.com/od/networkprotocols/g/bldef_ftp.htmhttp://compnetworking.about.com/od/workingwithipaddresses/g/ip-addresses.htm


18/23

18

URL Filtering

URL filtering is used to control devices on the LAN access to specific URLs.

Select “No Filtering" to disable this function.

Select “Block all in the list" to deny all devices in the LAN to access the URLs thatyou have set in the URL filtering list.

You can select to add new configuration in the list (no more than 10), edit or delete

exist ones.

Port Forwarding

Port Forwarding is used to forward incoming traffic to specific ports or Internet

addresses on your network.

Port Trigger

In computer network, an application makes connection to external computer by

use specific port (trigger port), router forward external connection to internal

port as you specified (trigger port).

DMZ (Demilitarized Zone)

DMZ is a physical or logical sub-network that contains an organization's externalservices to a larger untrusted network, usually the Internet.

Device List:

The Device List lists the information about the device in the LAN including IP address,

host name, MAC address and connect mode.

4.4 Service

SMS

This function is used SMS device management.

Device: Display the contents of „Inbox', „Outbox' and „Draft' stored in memory of

the device. User can add, edit, delete, forward, send and other functions by click

icon buttons on configuration page.


19/23

19

(U) SIM: (U) SIM card 'inbox' outbox 'storage content.

The user can click on the interface icon button New SMS, edit, delete, forward,

send, resend and other related functions.

Setting: SMS center number settings, select Settings and SMS storage location.

The device is able to automatically identify SMS center number from the (U) SIM

card you used. You can also manually change this setting. Please contact with

your service provider or network operator for detail of SMS center number.

Phonebook

This function is used to manage devices in Phonebook information.

(U) SIM: Display Phonebook information stored in (U) SIM card. Users can add,

edit, delete, export, search and other functions by click icon buttons on

configuration page.

Note: User to delete the Phonebook information will not be restored, please exercise

caution.

Call SettingCall preferences.

You can 'Enable' or 'Disable' Call Forwarding Unconditional, Call Forwarding Busy,

Call Forwarding No Rely, Call Forward when No Reachable 'call settings.

USSD

The value-added operation service is provided.

USSD List

New

Click on „New‟; Input relevant information; Click on „Save‟ to add new instructions

into the list.

Edit

Select a certain instruction in the „USSD List‟ list; Click on „Edit‟ to modify

parameters; Click on „Save‟ to update instructions.


20/23

20

Delete

Select a certain instruction in the „USSD List‟ list;

Click on „Delete‟ to delete the instruction from the list.

Note:

Please contact the network operator when using instructions.

4.5 System

System set:

New Password: Enter the new password. Confirm it, and then click "Save" tocomplete the setup.

Antenna: You can choose to 'Built-in antenna 'or 'External antenna' feature.

Config:

Reset:

Click "Reset" to reset the configuration to the factory settings.

Backup Settings:

Click "Backup" to back up the configuration file to the local PC.

Restore Settings:

Click "Restore" to restore the settings from the configuration file backed up in the

local PC.

Modem Update:

Click "Update" to through the local upgrade software version.

Restart

Click “Restart” to reboot the device.

Log:

In this page contains system log information.

Click "Download" to download the log information to the local PC.

Click "Clear" to delete all the log information.


21/23

21

Click "Refresh" to update the log information.

Diagnosis

Use ‟Ping' 'System check' „wireless status check'3 methods diagnostic device

information.


22/23

22

5. Warning and Precautions

Please do not prohibit the use of the device or use may cause interference or

danger occasions boot.

Please abide by the Code of hospitals and health care facilities. Please turn off

near medical equipment.

Interfere with the aircraft control system to prevent wireless devices, turn the

device off at the airport.

All wireless devices may be susceptible to interference, which could affect the

use of performance.

Near high-precision electronic instrument, turn off the wireless devices. It may

affect the performance of these devices (such as: the embedded medical

equipment). Do not place magnetic storage media such as magnetic cards and floppy disks

placed near wireless devices. The radiation emitted by the wireless device may

erase the information.

Do not attempt to disassemble the router and its accessories. The professionals

only able to provide service and repair for the device.

Do not use your wireless device in potentially explosive space.

Do not use your device at high temperatures or flammable gas spaces (such as:

gas stations).

Allows the use of only approved power supply equipment manufacturers, in order

to avoid damage to the equipment or explosion.

Do not place your device on flammable liquids, gases or explosive objects

nearby.

Do not store the device in high temperature environments, and will shorten the life

of electronic devices, damage the battery or melted accessories.

Do not store the device at low temperatures, when the device back to normal

operating temperature, water vapor will enter inside the device, damage the

device circuit board.

Compliance with relevant laws and regulations when using the device. Respect

the privacy and legitimate rights and interests of others.

Do not expose your device in strong sunlight, to avoid the heat.

Keep the device dry, and avoid all types of liquids into the inside of the machine,

so as to avoid damage.

This product is carefully designed and high-tech production, use with caution.

Do not allow children or pets contact equipment may cause choking or damage to

the equipment.


23/23

23

Do not wet hands to operate the equipment, may cause an electric shock.

Do not drop, knock, Rough handling can break internal circuit boards and the use

of performance.

Equipment to work long hours, the signal is weak or at room temperature under

normal fever phenomenon, which does not affect the use of equipment and life.

User minimum distance equipment physical distance should be 20cm.

END

wireless router misc userguide en

Documents