wireless sensor for measuring inclination & tilt
TRANSCRIPT
-
8/6/2019 Wireless Sensor for Measuring Inclination & Tilt
1/8
HI-INC Version
www.beanair.com
SmartSensor
Non contact actuation
Wireless Inclinometer
+/- 30 or +/- 15 or +/- 90
Mono or Bi Axial :+/- 15 , +/- 30 , +/-90 Anti-AliasingFilter 5
th
Data Logger
1.000.000 dataacquisition
Streaming60 SPS
IEEE 802.15.4 AntennaDivertsity
Main Features
Wireless Inclinometer based on
MEMS Technology
Measurement range:
mono-axial or bi-axial +/-15
mono-axial or bi-axial +/-30
bi-axial +/-90
Excellent resolution:
0,001 , for +/-15 & +/-30 version
0,0025 , for +/-90 version
Excellent radio link thanks to the antenna diversity
developed by Beanair
Non contact actuation for faster installation
Streaming mode: 60 SPS on each channel
Maximum radio range : 500 m (L.O.S)
Ultra-Power Radio Technology IEEE 802.15.4
Current consumption in sleeping mode :
-
8/6/2019 Wireless Sensor for Measuring Inclination & Tilt
2/82
HI-INC Version
www.beanair.com
SmartSensor
-
8/6/2019 Wireless Sensor for Measuring Inclination & Tilt
3/83
HI-INC Version
www.beanair.com
SmartSensorRemote configuration and monitoring
*Over-the-Air Configuration
OTAC*
The BeanScape application allows
the user to view all the data transmitted
by the BeanDevice HI-INC
With the OTAC (Over-the-Air configura-
tion) feature, the user can remotely
configure the BeanDevice HI-INC.
Several data acquisition modes are available on the
BeanDevice HI-INC :
Low Duty Cycle Data Acquisition mode (LDCDA): the data
acquisition is immediately transmitted by radio. The
transmission frequency can be configured from 1s to 24h.
Alarm Mode: the measured value is transmitted by radio
whenever an alarm threshold (fixed by the user) is
detected (4 alarms threshold levels High/Low).
Survey Mode: operates like the Alarm mode but the
device sends frequently a beacon frame informing its
current status.
Streaming Packet Mode: all measured values are
transmitted by packet within a continuous flow at 60
samples per second maximum
Streaming Mode: all measured values are transmitted in
real-time within a continuous flow at 60 samples per
second maximum
Math Mode : Values such as the mean value, minimum
value, maximum value and standard deviation are
calculated on sample time series and transmitted by
radio .
HI-INC
Antenna Diversity
While the vast majority of wireless sensors shows their
limits in harsh industrial environment, the
BeanDevice HI-INC integrates an innovative antenna di-
versity design, allowing to optimize the radio link quality in
environments subject to random and diverse disturbance.
Diversity antenna improves the quality and reliability of a
wireless link by 30%.
-
8/6/2019 Wireless Sensor for Measuring Inclination & Tilt
4/84
HI-INC Version
www.beanair.com
SmartSensor
Embedded Data Logger up to 1,000,0000
data acquisition records
The BeanDevice HI-INC integrates an embedded DataLogger, which can be used to log data whenever
a Wireless Sensor Network can not be easily deployed on your site. All the data acquisition are stored on the
embedded flash and then transmitted to the BeanGateway once a Wireless Sensor Network is established.
The DataLogger feature is compatible with all the data acquisition mode available on your BeanDevice
HI-INC :
LowDutyCycle Data Acquisition
Alarm
Math
Streaming & Streaming packet ( maximum data rate : 60 samples per second for each axis)
Example: Tilt measurement on a bridge
The BeanDevice HI-INC is configured with
the dataLogger feature. A standalone
installation of the BeanDevice HI-INC will
be done on the bridge, without the necessity
to be connected to the BeanGateway.
During the measurement campaign, all the
data acquisition are logged on the embedded
flash of the BeanDevice HI-INC .
When a technician goes on the site with the
BeanGateway , a request for a log transmis-
sion is sent by the BeanGateway to the
BeanDevice. Then the BeanDeviceHI-INC
starts sending all its logs . If all the logs are
transmitted to the BeanGateway sucessful-
ly, the flash memory is erased and new logs
will be recorded;
BeanDevice HI-INC
The Datalogger
feature isactivated on the
BeanDevice
BeanGateway
(WSN Coordinator)
Transmi
tsallthe
datalo
gs
Requestfor
Logstran
smission
BeanDevice HI-INC
-
8/6/2019 Wireless Sensor for Measuring Inclination & Tilt
5/85
HI-INC Version
www.beanair.com
SmartSensor
Inclinometer specifications
Inclinometer Technology Inclinometer based on MEMS Technology
Measurement resolution
(Bandwidth 10 Hz)
HI-INC 15M & HI-INC 15B & HI-INC 30M & HI-INC 30B versions: 0,001HI-INC 90B version : 0,0025
Typical non-linearity
HI-INC 15M & HI-INC 15B versions: 0,057
HI-INC 30M & HI-INC 30B versions : 0,11
HI-INC 90B version: 0,57
Analog to Digital converter16-bits, SAR architecture (Successive Approximation Register) with temperature
compensation
Sensor frequency
Response (-3 dB)DC to 28 Hz
Noise spectral density
DC to 100 Hz
HI-INC 15M & HI-INC 15B & HI-INC 30M & HI-INC 30B versions: 0.0004 / Hz
HI-INC 90B version: 0.0008 / Hz
Anti-aliasing filter Butterworth 5th
order filter cut-off frequency remotely programmable (BeanScape)
Over-the-air configuration (OTAC) parameters
Data Acquisition mode
(SPS = sample per second)
Low Duty Cycle Data Acquisition (LDCDA) Mode: 1s to 24 hour
Alarm & Survey mode: 1s to 24 hour
Math Mode : 60 SPS maximum
Streaming Packet Mode: 60 SPS maximum
Streaming Mode: 60 SPS maximum
Sampling Rate(in streaming and mode)
Minimum: 1 SPSMaximum: 60 SPSon each channel
Alarm Threshold 2 high levels alarms & 2 low levels alarms
Cut-off frequency
(Anti-aliasing filter)1 100 Hz
Power Mode System on Idle or Active
TX Power -7 dBm / -1 dBm / 5 dBm / 11 dBm / 15 dBm / 18 dBm
Product reference
BND-HI-INCMRWP
MRMeasurement Range:
- 15M : mono-axial 15
- 15B : bi-axial 30
- 30M : mono-axial 30
- 30B : bi-axial 30
- 90B : bi-axial 90
WPWireless Technology
- IEEE: IEEE 802.15.4 (2006)
Example: BND-HI-INC-15B-IEEEWireless bi-axial inclinometer with +/-15 measurement range with IEEE 802.15.4 Wireless
Technology
-
8/6/2019 Wireless Sensor for Measuring Inclination & Tilt
6/86
HI-INC Version
www.beanair.com
SmartSensor
Others specifications
Embedded loggerStorage Capacity : up to 1 000 000 measurements
Integrated real time clock
Write/read Cycle: 400 000
Real Time Clock Extremely Accurate Real Time Clock for measurement timestamping
Integrated battery char-
ger
Integrated Lithium-ion battery charger with high precision battery monitoring :
Overvoltage Protection, Overcurrent/Short-Circuit Protection, Undervoltage Protection
Battery Temperature monitioring
Current accumulation measurement
Current consumption
During data acquisition : 20 to 30 mA
During Radio transmission : 40 mA @ 5dBm , 70 mA @ 18 dBm
During Idle : < 45 uA
Operating Temperature Industrial temperature : -40 C to +85 C
EnclosureAluminium & Watertight (IP66) enclosure
Dimensions in mm (LxWxH): 80x55x21 mm, Weight (battery included) : 135g
Shocks resistance 60g during 50 ms
NormsCE Labelling Directive R&TTE (Radio) ETSI EN 300 328
ROHS - Directive 2002/95/EC
External power supply External power supply : +8v to +28v
Rechargeable battery High density Lithium-Ion rechargeable battery capacity of 1.3 Ah (referenced as BAT1.3DMG)
Power-supply bloc
(Option)Wall plug-in, Switchmode power Supply 12V @ 1,25A with sealed M8 Plug (IP67)
Mechanical mounting
(Option)Screw mounting
Product specifications are subject to change without notice. Contact Beanair for latest specifications.
RF specifications
Wireless Protocol Stack IEEE 802.15.4 (2006 version)
WSN Topology Point-to-Point / Star
Encryption AES 128 bits (AES integrated coprocessor)
Data rate 250 Kbits/s
RF Characteristics ISM 2.4GHz 16 Channels. Antenna diversity architecture designed by Beanair
TX Power -7 dBm to +18 dBm
Receiver Sensitivity -95,5 dBm to -104 dBm
Maximum Radio Range 500m (L.O.S)
Antenna Antenna diversity : 2 omnidirectional antenna with a gain of 2,2 dBi
-
8/6/2019 Wireless Sensor for Measuring Inclination & Tilt
7/87
HI-INC Version
www.beanair.com
SmartSensor
Indoor Version
HI-INC
OR
Getting started with a Wireless Sensor Network
Outdoor Version
Scilab scripts for digital
signal processing
Free software for numerical computation
Description StarterKit Reference
Starterkit Wireless Inclinometer (Mono-Axial 15)
1 xBeanGateway Ethernet(Indoor version), Ref.: BGTW-ETH-IND
1 xBeanDevice HI-INC Inclinometer15 Mono-Axial , Ref: BND-HI-INC-15M-IEEE
1 xBeanscape Lite, Ref: BNSC_LITE
1xScilab Scripts for Digital Signal Processing (FFT and PPV Filtering)
SK_HI-INC-15M_IND
Starterkit Wireless Inclinometer (mono-axial 30)
1 xBeanGateway Ethernet(Indoor version), Ref.: BGTW-ETH-IND
1 xBeanDevice HI-INC Inclinometer30 mono-axial, Ref:BND-HI-INC-30M-IEEE
1 xBeanscape Lite, Ref: BNSC_LITE
1xScilab Scripts for Digital Signal Processing (FFT and PPV Filtering)
SK_HI-INC-30M_IND
-
8/6/2019 Wireless Sensor for Measuring Inclination & Tilt
8/88
HI-INC Version
www.beanair.com
SmartSensor Getting started with a Wireless Sensor Network
Description StarterKit Reference
Starterkit Wireless Inclinometer(bi-axial 15)
1 xBeanGateway Ethernet (Indoor version), Ref.: BGTW-ETH-IND
1 xBeanDevice HI-INC Inclinometer bi-axial15, Ref.: BND-HI-INC-15B-IEEE
1 xBeanscape Lite, Ref: BNSC_LITE
1xScilab Scripts for Digital Signal Processing (FFT and PPV Filtering)
SK_HI_INC_15B_IND
Starterkit Wireless Inclinometer (bi-axial 30)
1 xBeanGateway Ethernet (Indoor version), Ref.: BGTW-ETH-IND
1 xBeanDevice HI-INC Inclinometer Bi-axial30, Ref: BND-HI-INC-30B-IEEE
1 xBeanscape Lite, Ref: BNSC_LITE
1xScilab Scripts for Digital Signal Processing (FFT and PPV Filtering)
SK_HI_INC_30B_IND
Starterkit Wireless Inclinometer (bi-axial 90)
1 xBeanGateway Ethernet (Indoor version), Ref.: BGTW-ETH-IND
1 xBeanDevice HI-INC Inclinometer Bi-axial90, Ref: BND-HI-INC-90B-IEEE
1 xBeanscape Lite, Ref: BNSC_LITE1xScilab Scripts for Digital Signal Processing (FFT and PPV Filtering)
SK_HI_INC_90B_IND
Starterkit Wireless Inclinometer (Mono-Axial 15)
1 xBeanGateway Ethernet(Outdoor version), Ref.: BGTW-ETH-OUT
1 xBeanDevice HI-INC Inclinometer15 Mono-Axial, Ref: BND-HI-INC-15M-IEEE
1 xBeanscape Lite, Ref: BNSC_LITE
1xScilab Scripts for Digital Signal Processing (FFT and PPV Filtering)
SK_HI-INC-15M_OUT
Starterkit Wireless Inclinometer (mono-axial 30)
1 xBeanGateway Ethernet(Outdoor version), Ref.: BGTW-ETH-OUT
1 xBeanDevice HI-INC Inclinometer30 mono-axial, Ref:BND-HI-INC-30M-IEEE
1 xBeanscape Lite, Ref: BNSC_LITE
1xScilab Scripts for Digital Signal Processing (FFT and PPV Filtering)
SK_HI-INC-30M_OUT
Starterkit Wireless Inclinometer(bi-axial 15)
1 xBeanGateway Ethernet (Outdoor version), Ref.: BGTW-ETH-OUT
1 xBeanDevice HI-INC Inclinometer bi-axial15, Ref.: BND-HI-INC-15B-IEEE
1 xBeanscape Lite, Ref: BNSC_LITE
1xScilab Scripts for Digital Signal Processing (FFT and PPV Filtering)
SK_HI_INC_15B_OUT
Starterkit Wireless Inclinometer (bi-axial 30)
1 xBeanGateway Ethernet (Outdoor version), Ref.: BGTW-ETH-OUT
1 xBeanDevice HI-INC Inclinometer Bi-axial30, Ref: BND-HI-INC-30B-IEEE
1 xBeanscape Lite, Ref: BNSC_LITE
1xScilab Scripts for Digital Signal Processing (FFT and PPV Filtering)
SK_HI_INC_30B_OUT
Starterkit Wireless Inclinometer (bi-axial 90)
1 xBeanGateway Ethernet (Outdoor version), Ref.: BGTW-ETH-OUT
1 xBeanDevice HI-INC Inclinometer Bi-axial90, Ref: BND-HI-INC-90B-IEEE
1 xBeanscape Lite, Ref: BNSC_LITE
1xScilab Scripts for Digital Signal Processing (FFT and PPV Filtering)
SK_HI_INC_90B_OUT
The BeanDevice HI-INCoperates only on our Wireless Sensor Networks , you will need the BeanGateway and the BeanScape for starting a wireless
sensor Networks .