wiring accessories circuit protection · 2019-10-13 · ceiling accessories 18 grid system 22 metal...

2006wiring accessoriescircuit protection

Switches & Dimmers 02

Power & Control 06

Communications: TV, Telephone & Data 14

Ceiling Accessories 18

Grid System 22

Metal Plate 26

Flat Plate 30

Decorative Brass 34

Metalclad 38

Interiors 42

Installation Boxes 46

Protector : RCD Wiring Accessories 48

Protector : Consumer Units 50

Technical Data 54

Numeric Index 59

ContentsVolex Accessories has always been a name synonymouswith reliability and value. Committed to adding extra qualityfeatures and contemporary aesthetics to its designs,Volex has recently launched a new generation of productswhich combine the latest looks with value for money andproduct features customers expect.

Volex is part of Electrium, one of the UK’s largest independentelectrical groups, which has offices and manufacturing sitesin the UK, India, China and the Middle east.

All Volex products comply with the applicable British Standard specification and should be installed

by suitably qualified personnel in accordance with the requirements of relevant legislation, regulations

(including IEE Wiring Regulations and UK Building Regulations) and the accepted practice in the industry.

The products listed or described in this publication may be protected by one or more patents,

and/or registered designs and/or applications. A full list of patents registered designs and applications

may be obtained from the company secretary of Electrium Limited.

Left:Electrium’s purpose built Commercial Centrein Cannock, Staffordshire.

Switches &

Dim

mers

3

Undergoing a minimum of50,000 operations, the Volex10AX switch design combinesperformance, reliability andsafety.• The silver nickel contact tip

ensures a longer life.• A minimum 3mm contact

gap ensures added safety.• The arc shield minimises

visible arc flash whenoperating the switch.

Volex provides a comprehensive rangeof plate switches to control lighting fordomestic and commercial applications.The 1000 series wall switches are ratedat 10AX therefore making them idealfor switching incandescent andfluorescent lighting.

Switc

hes

& D

imm

ers

10AX WALL SWITCHES

LIST NO DESCRIPTION CARTON QTY

VX1010 1 gang 1 way switch 10VX1020 1 gang 2 way switch 10VX1030 1 gang intermediate switch 10VX1040 2 gang 2 way switch 10VX1050 3 gang 2 way switch 10VX1054 4 gang 2 way switch 5

• BS EN 60669-1• Terminals suitable for 4x1.0mm2, 3x1.5mm2 or 1x2.5mm2

conductors• 3mm contact gap• Fully rated at 10AX for fluorescent or inductive loads• Two way switches can be wired as one wayDimensions

1–3 gang: 85mmx85mm with 60.3mm fixing centres4 gang: 145mmx85mm with 120.6mm fixing centres

Mounting boxesSurface moulded: 1–3 gang VX9404; 4 gang VX9412Flush metal: 1–3 gang SB623; 4 gang SB665

4

VX1010 VX1040

VX1050 VX1054

VX1000

10A RETRACTIVE SWITCH


VX1000 1 gang bell push 10


conductors• can be wired for normally open (N/O) or normally closed (N/C)

circuitsDimensions

85mmx85mm with 60.3mm fixing centresMounting boxes

Surface moulded:VX9404Flush metal: SB623

VX2060 VX2062

6AX ARCHITRAVE SWITCHES


VX2060 1 gang 1 way switch 10VX2061 1 gang 2 way switch 10VX2062 2 gang 2 way switch 10

• BS EN 60669-1Dimensions

1G: 32mmx86mm2G: 32mmx146mm

Mounting boxesSurface moulded: 1 gang VX9401 2 gang VX9402Flush metal: 1 gang 9257 2 gang 9258

Switches &

Dim

mers

5

VX9001

VX0250PU

VX0400PU

6AX CEILING SWITCH


VX9001 1 way ceiling switch 10VX9002 2 way ceiling switch 10VX9009 Cord & acorn for ceiling switches 50

• BS EN 60669-1• Supplied with pull cord• 50.8mm fixing centres

250W DIMMER SWITCHES


VX0250PU Push on/off, 1 gang 10VX0252PU Push on/off, 2 gang 5

• Complies with EMC Directive• Dimmers can be used 1 or 2 way• For use with tungsten filament lamp only

Dimensions86mmx86mm with 18.5mm plate depth

Mounting boxesSurface moulded:VX9409Flush metal:SB655

400W DIMMER SWITCH


VX0400PU Push on/off 1 gang dimmer 10

• Complies with EMC Directive• Dimmers can be used 1 or 2 way• For use under tungsten filament lamp only

Dimensions86mmx86mm with 18.5mm plate depth

Mounting boxSurface moulded:VX9409Flush metal: SB655

Power &

Control

7

The extensive range of power

and control accessories is suitable for any

residential installation.The range incorporates

such features as wide rockers for easy operation,

an arc shield, which minimises visible arc flash

and positive switching mechanism to prevent

balancing between the on and off positions.

A product marking service is also available

on 13A fused connection units as well as 20A

and 45A control switches.

Pow

er &

Con

trol

13A SWITCHED SOCKET OUTLETS


VX1300 1 gang SP switched socket 10VX1300/D 1 gang DP switched socket 5VX1400 1 gang SP switched socket with neon 10VX1500 2 gang SP switched socket 5VX1500/D 2 gang DP switched socket 5VX1600 2 gang SP switched socket with neon 5VX1700 2 gang DP switched socket with outboard rockers 5VX1800 2 gang DP switched socket with outboard

rockers & neon 5VT1507 1-2 gang conversion socket 1

• BS1363• Terminals suitable for up to 3x2.5mm2 or 2x4mm2 conductors• 2 gang DP comes with twin earth as standard

Dimensions1 gang: 85mmx85mm with 60.3mm fixing centres2 gang: 145mmx85mm with 120.6mm fixing centres

Mounting boxesSurface moulded: 1 gang VX9409; 2 gang VX9414Flush metal: 1 gang SB655; 2 gang SB665Flush dry lining: 1 gang SB619; 2 gang SB629

8

13A UNSWITCHED SOCKET OUTLETS


VX9100 1 gang unswitched socket 10VX9200 2 gang unswitched socket 5VX9230 3 gang unswitched socket, fused 13A 5

• BS1363• Terminals suitable for up to 3x2.5mm2 or 2x4mm2 conductors

Dimensions1 gang: 85mmx85mm with 60.3mm fixing centres2 gang: 145mmx85mm with 120.6mm fixing centres3 gang: 205mmx85mm with 181mm fixing centres

Mounting boxesSurface moulded: 1 gang VX9409; 2 gang VX9414; 3 gang VX9403Flush metal: 1 gang SB655; 2 gang SB665; 3 gang SB646Flush dry lining: 1 gang SB619; 2 gang SB629

VX1400 VX1500

VX9100 VX9200

VT1092

VT1108 VT1208

13A 30mA RCD PROTECTED SOCKETS & FCU


VT1108 1 gang switched RCD protected socket outlet 1VT1208 2 gang switched RCD protected socket outlet 1VT1092 RCD Fused Connection Unit 1

• Socket outlets to BS7288• FCU to BS4293• Double pole switching• Terminals suitable for up to 3x2.5mm2 or 2x4.0mm2 conductors

Dimensions1G: 86mmx86mm with 60.3mm fixing centres2G: 146mmx86mm with 120.6mm fixing centresFCU: 86mmx86mm with 60.3mm fixing centres

Mounting boxesSurface moulded: 1G & FCU:VX9405 2G:VX9417Flush metal: 1G & FCU: SB615 2G: SB625

VX1700

Power &

Control

9ROUND PIN SOCKET OUTLET


VX9900 15A switched socket 10VX9901 2A 3 pin socket 10VX9904 16A 2 pin socket (for export only) 10VX9906 16A 2 pin switched socket (for export only) 10VX9907 16A 2 pin twin switched socket (for export only) 5

• BS546 (VX9900,VX9901), BS5733Dimensions

1 gang: 85mmx85mm with 60.3mm fixing centres2 gang: 145mmx85mm with 120.6mm fixing centres

Mounting boxesSurface moulded:VX9409. Flush metal:SB655

VX9900 VX9904

VX1081 VX1090

13A FUSED CONNECTION UNITS WITH OPTIONALFLEX OUTLET


VX1080 DP switched 10VX1081 DP switched with neon 10VX1090 Unswitched 10VX1091 Unswitched with neon 10

• BS1363• Terminals suitable for up to 3x2.5mm2 or 2x4mm2 conductors• Fitted with knockout position at bottom edge of plate• Cord outlet suitable for flexible cord up to 10mm2 diameterDimensions


Surface moulded:VX9409. Flush metal: 1 gang SB655

VX1080WM

CHIMES AND BELLPUSHES


CA1075 2 Note Chime with Integral Transformer 1CA1076 2 Note Chime 1CA2001 Bell Push 1CA2001L Illuminated Bell Push 1

Chime:• 8V ˜• Max 85 dB/ADimensions

169mmx104mmx49mm

Bellpush:• Max 24VDimensions

65mmx25mmx20mm Fixing screws not supplied

FUSED CONNECTION UNIT MARKING SERVICE EXAMPLES

LIST NO MARKING CARTON QTY

VX1080BO BOILER 10VX1080HD EXTRACTOR HOOD 10VX1080DW DISH WASHER 10VX1080EF EXTRACTOR FAN 10VX1080FR FRIDGE 10VX1080FZ FREEZER 10VX1080FF FRIDGE FREEZER 10VX1080HB HOB 10VX1080HT HEATING 10VX1080MW MICROWAVE 10VX1080TD TUMBLE DRYER 10VX1080WD WASTE DISPOSAL 10VX1080WDR WASHER DRYER 10VX1080WM WASHING MACHINE 10VX1080WH WATER HEATER 10Marking to customer specification also available

CA1075

Pow

er &

Con

trol

6A THREE POLE CONTROL SWITCH


VX1013 3 pole isolating switch marked withisolator and fan symbol 10

• BS3676, BS EN 60947-3• 250V only

Dimensions85mmx85mm with 60.3mm fixing centres

Mounting boxesSurface moulded:VX9404Flush metal: 1 gang SB623

10

20A DP CONTROL SWITCHES WITH OPTIONALFLEX OUTLET


VX1070 DP switch 10VX1070WH DP switch marked ‘Water Heater’ 10VX1060 DP switch with neon 10VX1060WH DP switch with neon marked ‘Water Heater’ 10

• BS EN 60669-1• Terminals suitable for 3x2.5mm2 or 2x4mm2 conductors• Fitted with knockout position at bottom edge of plate• Cord outlet suitable for flexible cord up to 10mm2



20A DP CONTROL SWITCH MARKING SERVICE

The following markings are available as standard by adding theappropriate suffix to the list number, eg VX1060AC:

AIR CONDITIONING – ACWATER HEATER –WHWASHING MACHINE –WM

Markings to customer specification also available

20A BATH/SINK SWITCH


VX5207 20A bath/sink switch with neon 10VX5208 20A bath/sink switch 10

• BS 3676

VX1013

VX1060 VX1060WH

VX1060AC

VX5207 VX5208

Power &

Control

1145A DP CONTROL SWITCHES


VX9712 45A DP switch with neon 1VX9713 45A DP switch 1VX9702 45A DP switch with neon (large plate) 1VX9703 45A DP switch (large plate) 1

• BS EN 60669-1• Terminals suitable for up to 1x16mm2 cable

Dimensions1 gang: 85mmx85mm with 60.3mm fixing centresLarge plate: 85mmx145mm with 120.6mm fixing centres

Mounting boxesSurface moulded: 1 gang VX9405; large plate VX9416Flush metal: 1 gang SB618; large plate SB628

• The following markings are available, add the appropriate suffixto the list number, eg VX9712CK– COOKER – CK– SHOWER – SH– AIR CONDITIONING – AC

VX9712 VX9713

45A COOKER CONTROL UNITS


VX9700 45A cooker control unit with 13A switch socket& neon indicators 1

VX9701 45A cooker control unit with 13A switch socket 1

• BS4177, BS1363• Terminals suitable for up to 1x16mm2 cable• Double pole switching on both 45A & 13A circuits• 2 earth terminals



VX9702 VX9703

COOKER OUTLET PLATE


VX9704 Cooker outlet plate with 2x10mm2

pillar terminals 10

• BS5733



VX9700

VX9704 front VX9704 back

Pow

er &

Con

trol

13A FLEX OUTLET PLATE


VX9990 Flex outlet plate with pillar type terminals 10

• BS5733 where applicable• Suitable for flex up to 10mm2

• Terminals suitable for up to 3x2.5mm2 conductors



12

VX9990 VX9990front back

20A DUAL VOLTAGE SHAVER LIGHT UNIT


VT7066 20VA dual voltage shaver unit 1

• BSEN60598• 2 socket outlets,with safety shutters, clearly marked 115V or 230V• Pull cord switch for operation of 60W lamp• Accepts British,Continental or American shaver plugs• Automatic cut-out and reset protects against overload

Dimensions438mmx72mm

VX9800

DUAL VOLTAGE SHAVER UNIT


VX9800 20VA dual voltage shaver unit 1

• BSEN 61558• Suitable for bathrooms when installed in accordance with IEE

regulations• 2 socket outlets,with safety shutters, clearly marked 115V or 230V• Accepts British,Continental or American shaver plugs• Double wound safety isolating transformer with overload protection• Terminal suitable for 2x2.5mm2 conductors



VT7066

50A DP CEILING SWITCHES


VX9706 50A DP ceiling switch with neon andmechanical ‘off’ indicator 5

• BS EN 60669-1• Double pole switching• 60.3mm fixing centres• Pillar terminals suitable for all cables up to 10mm2

• For ease of wiring, 2 earth terminals are fitted

Mounting boxSurface moulded:VX9405VX9706

13A PLUGS


VX1321 White resilient plug 10VX1321BK Black resilient plug 10VX1322 White Supergrip plug 10VX1307 White Nylon plug 20VX1307BK Black Nylon plug 20

• ASTA approved to BS1363/A• Fused 13A with ASTA approved BS1362 fuse• Resilient Plug has synthetic rubberised cover and high impact

resistant base

ROUND PIN PLUGS


VX1302 2A round pin plug 10VX0030 5A round pin plug 10VX0042 15A round pin plug 10

• ASTA approved to BS1363/A or BS546

VX1307 VX1321BK VX1322

VX1302 VX0030 VX0042

ADAPTORS


VX1393 13A 2 way unfused adaptor 10VX1390 13A 3 way fused adaptor 10VX0580 13A shaver adaptor fused at 1A 10

• BS1363 & BS5733• All pin apertures are spring shuttered• Fused adaptors are fitted with ASTA approved fuses and are

designed to allow the fuse to be changed without dismantling• The fused 1A shaver adaptor can be used with British &

Continental 2 pin shaver plugs

VX0580 VX1390 VX1393

RESILIENT TRAILING SOCKETS


VX6651 1 gang 13A socket, white 10VX6652BK 1 gang 13A socket, black 10VX6653 2 gang 13A socket, white 5VX6654BK 2 gang 13A socket, black 5

• BS1363/A• Synthetic rubberised moulding material for impact resistance• Angled plug entry on twin version for ease of insertion &

withdrawalVX6652BK VX6654BK

FLEX CONNECTORS


VX1117 5A 3 pin flexible connector 10VX1118 13A 3 core through connector 10VX1119 5A 2 core through connector 10

• BS5733

VX1117 VX1118 VX1119

Accessories

13

The comprehensive Volex Communication

range offers a flexible solution to a variety

of communication requirements and

includes a wide range of coaxial,

data and audio modules.

Com

munications:T

V,Telephone & D

ata

15

TELEPHONE OUTLETS


VX9974 Master 10VX9984 Secondary 10


Mounting boxesSurface moulded:VX9404Flush metal: SB655

VX9974 VX9984

RJ11 TELEPHONE OUTLETS


VX9986 RJ11 outlet 10


Mounting boxesSurface moulded:VX9404Flush metal: SB655

VX9986

COAXIAL OUTLETS


VX9992 1 gang, non-isolated 10VX9993 2 gang, non-isolated 10VX9982 1 gang, isolated 10

• BS3041 where applicableDimensions


Surface moulded:VX9409Flush metal: SB655VX9992 VX9993

BLANKING PLATES


VX9991 1 gang blanking plate 10VX9996 2 gang blanking plate 5VX9960 1 gang architrave blanking plate 10

• BS5733 where applicable

Dimensions1 gang: 85mmx85mm with 60.3mm fixing centres2 gang: 145mmx85mm with 120.6mm fixing centres1 gang architrave: 32mmx86mm with 60.3mm fixing centresVX9991 VX9996

Com

mun

icat

ions

:TV,

Tele

phon

e &

Dat

a

16

MOULDED MOUNTING PLATES


VX9062 2 module mounting plate 10VX9064 4 module mounting plate 10

Mounting boxesSurface moulded: 1 gang VX9405 2 gang VX9416 Flush metal: 1 gang SB615 2 gang SB625

VX9062 VX9064

VX9062SS VX9064PS

DECORATIVE MOUNTING PLATES


VX9062_ _ 2 module mounting plate 5VX9064_ _ 4 module mounting plate 5VB9062_ _ 2 module mounting plate 5VB9064_ _ 4 module mounting plate 5

Metal plate available in the following finishes:Stainless Steel (SS), Polished Steel (PS), Satin Brass (SB).Decorative Brass available in the following finishes:Georgian (GE),Victorian (VI).All brass finishes (GE,VI, SB) are made to order.Mounting box

Flush metal: 1 gang SB615 2 gang SB625

VX9988 VX9980 VX9981

COMMUNICATION MODULES


VX9988 RJ45 Outlet - category 5e 10VX9980 Telephone Master 10VX9981 Telephone Secondary 10

Dimensions1 module - 25mmx50mm

VX9978 VX9987 VX9970

DATA & MULTI MEDIA MODULES


VX9970 2 module plate 4 binding posts 10VX9971 2 module plate 4 phono & 2 IR connectors 10VX9972 1 module plate 2 binding posts 10VX9977 Diplexer module 10VX9978 Single screened TV outlet 10VX9987 Triplexer Unit 10VX9989 Module satellite outlet 10

Dimensions1 module - 25mmx50mm2 module - 50mmx50mm

VX6080 VX6081 VX6082

BLANK MODULES


VX6080 1/2 module blank 10VX6081 1 module blank 10VX6082 2 module blank 10

Dimensions1/2 module - 12.5mmx50mm1 module - 25mmx50mm2 module - 50mmx50mm

Com

munications:T

V,Telephone & D

ata

17

Volex offer a complete range ofquality ceiling accessories to suit everyinstallation including a new range ofsafety ceiling accessories and a compactfluorescent lampholder which providesthe ideal solution to the energy efficientlighting requirements detailed in theBuilding Regulations.

Cei

ling

Acc

esso

ries

18

STRAIGHT BATTEN LAMPHOLDERS,WITH INTEGRALTERMINAL BLOCK


VX9215 Heat resistant, 3 terminals & earth, short skirt,T2 rating 10

VX9215HO Heat resistant, 3 terminals & earth, home office skirt,T2 rating 10

• BS EN 61184,T2 Rating• In-line integral terminal block: 3 live, 2 switch, 3 neutral• Each terminal accepts up to 1.5mm2 cable• Separate earth terminal with 6.0mm2 capacity• 3 sets of knockouts• Fitted with heat resistant tails

VX9215 VX9215HO

Ceiling A

ccessories

19PENDANT SETS


VX6677 Pendant fitting (VX9074 & VX1/T2) 6" HR flex,T2 rating 25

VX6678 Pendant fitting (VX9074 & VX1/T2) 9" HR flex,T2 rating 25

VX6679 Pendant fitting (VX9074 & VX0003HO) 6" HR flex,T2 rating 25

• Ceiling rose manufactured to BS67• Lampholders manufactured to BS5042• Heat resistant, 2 core, 0.75mm2 PVC flexible cable

VX6677 VX6678

LOW ENERGY PENDANT SET


VX6681CFL 10-13W 6” Pendant set with compactFluorescent Lampholder 1

• 42mm diameter Lampshade• Accepts G24 4 pin lamp (not supplied)• See page 56 for technical details

VX6681CFL

SAFETY PENDANT SET


VX6850 6” cord (VX9074 & VX0850) 10

• Supplied with appropriate length of heat resistant 0.75mm2

twin core circular cord to BS 6141 for service loads up to 2.5kg

VX6850

SAFETY LAMPHOLDERS


VX0850 Safety pendant lampholder 20VX0851 Safety batten lampholder 1

• BS EN 61184 where applicable,T2 rating• Fixed terminals on pendant lampholder accept 1.0m cable• Batten lampholder has terminals for live, neutral, loop in and

protective earth• Fixed terminal strip on batten lampholder accepts 1.5m cable• Home Office shield supplied with the safety batten lampholder• ‘Wipe clean’ contacts avoid seizure to pins making for safe and

easy lamp replacement

VX0850 VX0851

PENDANT LAMPHOLDERS


VX1/T2 Cord grip lampholder, heat resistant, short skirt,spring plungers,T2 rating 20

VX1/T2HO Cord grip lampholder, heat resistant,home office skirt, spring plungers,T2 rating 10

VX4522 1/2” screwed entry double poleswitched lampholder 20

• BS EN 61184,T2 Rating• All unswitched lampholders have one-piece thermoplastic con-

struction of interior• Switched lampholder has metal interior• Non-rising terminals, ensuring that cables are not disturbed when

the lamp is changed• Non-stick skirt and cap

VX1/T2 VX1/T2HO

CEILING ROSES


VX9074 3 terminals & earth 10

• BS67• VX9074 – In-line integral terminal block: 3 live, 2 switch, 3 neutral

VX0074 – Each terminal accepts up to 1.5mm2 cableVX0074 – Separate earth terminal with 6.0mm2 capacityVX0074 – 3 sets of knockoutsVX0074 – 3 fixing holes at 50.8mm centres

VX9074

Cei

ling

Acc

esso

ries

20STRAIGHT BATTEN LAMPHOLDERS


VX0205 Heat resistant, 3 terminals, short skirt,T2 rating 10VX0205HO Heat resistant, 3 terminals, home office skirt,T2 rating 10

• BS EN 61184,T2 Rating• Direct wiring to lampholder for VX0205 series• 50.8mm fixing centres

VX0205 VX0205HO

VX0208HO VX0218HO

ANGLED BATTEN LAMPHOLDERS


VX0208HO Heat resistant, 3 terminals, home office skirt,T2 rating 10

VX0218HO Heat resistant, 3 terminals & earth, home office skirt,T2 rating 10

• BS EN 61184,T2 Rating• VX0208HO – Direct wiring to lampholder• VX0218HO – Separate 4 way terminal block with lampholder

VX0208HO – tails and integral backplate• 50.8mm fixing centres

6A CEILING SWITCHES


VX9001 1 way, 6A ceiling switch 10VX9002 2 way, 6A ceiling switch 10

• BS EN 60669-1• Supplied with pull cord• 50.8mm fixing centres

VX9001

50A DP CEILING SWITCH


VX9706 DP ceiling switch with neon & mechanical‘off’ indicator 5

• BS EN 60669-1• Terminal suitable for all cables up to 10mm2

• 60.3mm fixing centres• Pillar terminals suitable for all cables up to 10mm2

• For ease of wiring, 2 earth terminals are fitted

Mounting boxesFor use with surface box VX9405

VX9706

Ceiling A

ccessories

21

JUNCTION BOXES


VX9023BK 30A, 3 terminals, black 10VX9023 30A, 3 terminals, white 10VX9029BK 20A, 4 terminals, black 10VX9029 20A, 4 terminals, white 10

• BS6220• The selective entry shutters on the cover close any entry slots

not in use• Symbols clearly show which entries are open and closed• Slotted pillar terminals accept up to 4x4mm2 (30A) or 4x1.5mm2

(20A) twin & earth cables

VX9029 VX9023BK

VX20/2

MOUNTING BLOCKS


VX20/2 2 terminal 20

VX0009 VX0010 VX0011

ANCILLARY ITEMS


VX0009 Shade ring 100VX0010 Short skirt 50VX0011 Home office skirt 50VX0018 Break ring 50VX0219 Large ring for VX0215/0218 batten lampholders 10

Grid System

23

The Volex grid switch system enhances an alreadycomprehensive range of electrical accessories.Offering versatility and style,Volex grid is available in a choiceof finishes that can be flush or surface mounted.Switches have silver alloy contacts for prolonged life andlow contact resistance and are designed to minimise arc flashand prevent front access to live parts.

Gri

d Sy

stem

2410AX SWITCHES - MOULDED ROCKER


VG3430 10AX 1 way SP 6VG3530 10AX 2 way SP 6VG3489 10AX Retractive 6VG3490 10AX Retractive - bell symbol 6VG3490/1 10AX Retractive - fan symbol 6

• BS EN 60669-1• Fully rated for fluorescent and inductive loads.• Retractive switches can be wired for normally open (N/O)

or normally closed (N/C) circuits.

20AX SWITCHES - MOULDED ROCKER


VG3450 1 way 6VG3451 1 way complete with key 6VG3460 DP 6VG3461 DP complete with key 6VG3469 DP marked ‘ON’ 6VG3535 Intermediate 6VG3550 2 way 6VG3551 2 way complete with key 6VG3552 2 way and off 6VG3940 Spare key 6

• BS EN 60669-1 • Fully rated for fluorescent and inductive loads(except List No.VG3552).

ANCILLARY ITEMS - MOULDED


VG3435 Cord outlet - 10mm diameter aperture, complete with earthing terminal and cable clamp 6

VG3436 Fuse unit fitted with 13A ASTA certified fuse link 6VG3491 Indicator - Red 6VG3492 Blanking component 6VG3493 Indicator - Green 6VG3494 Indicator - Amber 6

• BS 5733 (Where Applicable)

VG3430 VG3490 VG3490/1

VG3450 VG3535 VG3551VG3460 VG3550

VG3435 VG3491 VG3493VG3436 VG3492 VG3494

LIST NO MARKING CARTON QTY LIST NO MARKING CARTON QTY

VG3460BO BOILER 6 VG3460HT HEATING SYSTEM 6VG3460HD COOKER HOOD 6 VG3460MW MICROWAVE 6VG3460DW DISHWASHER 6 VG3460TD TUMBLE DRYER 6VG3460EF EXTRACTOR FAN 6 VG3460WD WASTE DISPOSAL 6VG3460FR FRIDGE 6 VG3460WDR WASHER DRYER 6VG3460FZ FREEZER 6 VG3460WM WASHING MACHINE 6VG3460FF FRIDGE FREEZER 6 VG3460WA WATER HEATER 6VG3460HB HOB 6

Marking to customer specification also available

20AX DOUBLE POLE SWITCH MARKINGS

VG3901 VG3904

GRIDS COMPLETE WITH EARTH TERMINAL


VG3901 1 gang 20VG3902 2 gang 20VG3903 3 gang 10VG3904 4 gang 10

Dimensions1-2 gang 81mmx58mm 3-4 gang 141mmx58mm

When required for surface mounting assemblies, the fixing earsshould be removed or bent downwards at 90˚.

Grid System

25

VG3572 VG3570WH

VG3574PS VG3578SS

VG3201SG VG3206SG

FLUSH WHITE PLATES


VG3571 1 gang white moulded 20VG3572 2 gang white moulded 20VG3573 3 gang white moulded 10VG3574 4 gang white moulded 10VG3576 6 gang white moulded 1VG3578WH 8 gang white metal 1VG3570WH 12 gang white metal 1

Dimensions1-2 gang 86mmx86mm 6-8 gang 147mmx147mm3-4 gang 146mmx86mm 12 gang 147mmx207mm

FLUSH METAL PLATES


VG3571 _ _ 1 gang 20VG3572 _ _ 2 gang 20VG3573 _ _ 3 gang 20VG3574 _ _ 4 gang 20VG3576 _ _ 6 gang 1VG3578 _ _ 8 gang 1VG3579 _ _ 9 gang 1VG3570 _ _ 12 gang 1

Dimensions1-2 gang 86mmx86mm 6-8 gang 147mmx147mm3-4 gang 146mmx86mm 9-12 gang 147mmx207mmadd suffix PPSS (Polished Steel) SSSS (Stainless Steel) SSBB (Satin Brass)

BOXES


VG3201SG 1 and 2 gang surface or flush 10VG3203SG 3 and 4 gang surface or flush 5VG3206SG 6 and 8 gang surface or flush 1VG3209SG 12 gang surface or flush 1

Dimensions1-2 gang 73mmx73x40mm 3-4 gang 133mmx73mmx40mm6-8 gang 133mmx133mmx40mm 12 gang 133mmx194mmx40mm

20mm knock-outs in 1 and 2 gang box.20mm and 25mm knock-outs in 3-12 gang boxes.

VG3583SG VG3586SG

SURFACE METALCLAD PLATES


VG3581SG 1 gang 20VG3582SG 2 gang 20VG3583SG 3 gang 10VG3584SG 4 gang 10VG3586SG 6 gang 1VG3588SG 8 gang 1

Dimensions1-2 gang 77mmx77mm3-4 gang 137mmx77mm6-8 gang 137mmx137mm

Available in Satin Brass, Brushed Steeland Polished Steel, the Volex metal platerange allows specification of a co-ordinatedand comprehensive range of wiringaccessories.

Met

al P

late

26

10AX SWITCHES


VX1020 _ _ 1 gang 2 way switch 10VX1030 _ _ 1 gang intermediate switch 10VX1040 _ _ 2 gang 2 way switch 10VX1050 _ _ 3 gang 2 way switch 10VX1054 _ _ 4 gang 2 way switch 5


conductors• Fully rated at 10AX for fluorescent loadsDimensions Mounting boxes

1–3 gang: 89mmx89mm Flush metal: 1–3 gang SB623 4 gang: 149mmx89mm 4 gang SB665

VX1040PS VX1050SS

DIMMERS


VX0250_ _PU 1 gang 250W Dimmers 5VX0252_ _PU 2 gang 250W Dimmers 5VX0400_ _PU 1 gang 400W Dimmers 5VX0402_ _PU 2 gang 400W Dimmers 5

• Can be wired as 1 or 2 way• For use with tungsten filament lamp onlyDimensions Mounting boxes

1–2 gang: 86mmx86mm 1–2 gang SB615 or SB619VX0400PSPU VX0252SSPU

FAN ISOLATOR


VX1013 _ _ Triple Pole Fan Isolator 10

• BS EN 60669-1, BS EN 60947-3• Terminals suitable for 4x1.0mm2, 3x1.5mm2 or 1x2.5mm2

conductorsDimensions Mounting boxes

86mmx86mm Flush Metal: SB623

20A DP SWITCHES


VX1060 _ _ Switch with neon 10VX1060F _ _ Switch with neon, flex outlet & cord grip 10VX1060WH _ _ Switch with neon, marked ‘Water Heater’ 10VX1060WHF _ _ Switch with neon, flex outlet & cord grip,

marked ‘Water Heater’ 10VX1070 _ _ Switch 10VX1070F _ _ Switch with flex outlet & cord grip 10

• BS EN 60669-1• Terminals suitable for 3x2.5mm2 or 2x4.0mm2 conductorsDimensions Mounting boxes

86mmx86mm Flush metal:SB655

VX1060SB VX1060FSS



VX9702 _ _ Switch with neon (large plate) 1VX9703 _ _ Switch (large plate) 1VX9713 _ _ Switch 1

• BS EN 60669-1• Terminals suitable for up to 1x16mm2 cable• For the following markings, add appropriate suffix:

COOKER – CKSHOWER – SHAIR CONDITIONING – AC

Dimensions Mounting boxes1 gang: 86mmx86mm Flush metal: 1 gang SB618,2 gang: 86mmx146mm 2 gang SB628

VX9702SBCK VX9703SS

VX1013PS

Metal Plate

27

Metal plate accessories are available in the following finishes: SS – Brushed Stainless Steel; SB – Satin Brass; PS – Polished Stainless SteelIndicate the finish you require by adding the suffix to the list number, eg VX1080SS

13A SOCKET OUTLETS


VX9100 _ _ 1 gang socket 10VX9200 _ _ 2 gang socket 5VX1300 _ _ 1 gang SP switched socket 10VX1500 _ _ 2 gang SP switched socket 5VX1400 _ _ 1 gang SP switched socket with neon 10VX1600 _ _ 2 gang SP switched socket with neon 5

• BS1363• Terminals suitable for up to 3x2.5mm2 or 2x4.0mm2 conductors• Double pole switching available. Suffix list no. with -/D i.e.

VX1500SS/D• 2 gang DP sockets come with twin earth as standardDimensions

1 gang: 86mmx86mm2 gang: 146mmx86mm

Mounting boxesFlush metal: 1 gang SB655; 2 gang SB665

45A COOKER CONTROL UNIT


VX9701 _ _ Cooker Control Unit 1VX9700 _ _ Cooker Control Unit with neon 1

• BS4177, BS1363• Terminals suitable for up to 1x16mm2 conductorsDimensions

146mmx86mmMounting box

Flush metal:SB628VX9701PS

ROUND PIN SOCKET OUTLETS


VX9900 _ _ 15A switched socket, 1 gang, SP 10VX9901 _ _ 2A 3 pin socket 10

• BS546

Dimensions86mmx86mm

Mounting boxFlush metal:SB655

VX9900SB VX9901SS

13A FUSED CONNECTION UNITS


VX1080 _ _ DP switched 10VX1080F _ _ DP switched with flex outlet & cord grip 10VX1081 _ _ DP switched with neon 10VX1081F _ _ DP switched with neon, flex outlet & cord grip 10VX1090 _ _ Unswitched 10VX1090F _ _ Unswitched with flex outlet & cord grip 10

• BS1363• Terminals suitable for 3x2.5mm2 or 2x4.0mm2 conductor

Dimensions86mmx86mm


VX1081PS VX1090SS

VX9100SB VX1500SS

Met

al P

late

28



TELEPHONE OUTLETS


VX9974 _ _ Telephone master socket 10VX9984 _ _ Telephone secondary socket 10

Dimensions86mmx86mm

Mounting boxesFlush metal:SB655VX9974SB

COAXIAL OUTLETS


VX9992 _ _ 1 gang, non-isolated 10VX9993 _ _ 2 gang, non-isolated 10

Dimensions86mmx86mm

Mounting boxesFlush metal:SB655VX9992PS VX9993SB

MOUNTING PLATES


VX9062 _ _ 2 module mounting plate 5VX9064 _ _ 4 module mounting plate 5

Mounting boxesFlush metal 1 gang:SB615 2 gang:SB625

VX9062SS VX9064PS

BLANKING PLATES


VX9991 _ _ 1 gang 10VX9996 _ _ 2 gang 5

Dimensions1 gang: 86mmx86mm2 gang: 146mmx86mm

VX9991PS VX9996SB

SHAVER SOCKET


VX9800 _ _ Dual Voltage Shaver Unit 1

• BSEN61558• Terminals suitable for up to 2x2.5mm2 conductorsDimensions


Flush metal:SB628

VX9800PS

Metal Plate

29

Flat

Pla

te

30The Volex Flatplate range of metal plateaccessories offers a clean and slim solution witha decorative finish for residential dwellings.Products are available in Polished Steel, StainlessSteel, and Polished Brass plates with a choiceof white or black inserts.

10AX SWITCHES


VX3010 _ _ 1 gang 1 way switch 1VX3020 _ _ 1 gang 2 way switch 1VX3030 _ _ 1 gang intermediate switch 1VX3040 _ _ 2 gang 2 way switch 1VX3050 _ _ 3 gang 2 way switch 1VX3054 _ _ 4 gang 2 way switch 1

• BS EN 60669-1• Terminals suitable for 4x1.0mm2 or 3x1.5mm2 conductorsDimensions

1–3 gang: 88mmx88mm 4 gang: 148mmx88mmMounting boxes

Flush metal: 1-2 gang (exc. intermediate) SB623Intermediate switch & 3 gang SB6554 gang SB665Ensure back box is mounted 5mm below wall surface

VX3020PS VX3040PB

PUSH DIMMERS


VX3250_ _PU 1 gang 250W Dimmer 1VX3252_ _PU 2 gang 250W Dimmer 1VX3400_ _PU 1 gang 400W Dimmer 1

• Can be used as 1 or 2 way• For use with tungsten filamant lamps onlyDimensions

1–2 gang: 88mmx88mmMounting boxes

Flush metal: 250W SB665, 400W SB615VX3250PSPU VX3252SSPU

13A SWITCHED SOCKETS


VX3300 _ _ 1 gang SP Switched Socket 1VX3500 _ _ 2 gang SP Switched Socket 1VX3905 _ _ 5A Switched Socket 1

• BS 1363• Terminals suitable for up to 3x2.5mm2 or 2x4.0mm2 conductorsDimensions

1 gang 88mmx88mm 2 gang 148mmx88mmMounting boxes

Flush metal: 1–2 gang SB655 2 gang SB665



VX3080 _ _ DP switched 1VX3081 _ _ DP switched with neon 1VX3090 _ _ Unswitched 1

• BS 1363• Terminals suitable for up to 3x2.5mm2 or 2x4.0mm2 conductorsDimensions

88mmx88mmMounting boxes

Flush metal: SB655VX3080PB VX3081PS

VX3300PS VX3500SS

Flat Plate

31

Flush back boxes must be at least 5mm below the surface of the wall.Flat Plate Accessories are available in the following finishes:SS - Brushed Stainless Steel - White interior as standard (add BK suffix for Black)PS - Polished Stainless Steel - White interior as standard (add BK suffix for Black)PB - Polished Brass - Black interior as standard (add WH suffix for White)Indicate the finish required by adding the suffix to the List Number.

20A SWITCH


VX3060 _ _ Switch with neon 1

• BS EN 60669-1• Terminals suitable for 3x2.5mm2 or 2x4.0mm2 conductorsDimensions


Flush metal: 1 gang SB655

VX3060SS

45A SWITCH


VX3712 _ _ Switch with neon 1

• BS EN 60669-1• Terminals suitable for up to 1x16mm2 conductorDimensions


Flush metal:SB618

45A COOKER CONTROL SWITCH


VX3700 _ _ Cooker Switch with neon 1

• BS 4177, BS 1363• Terminals suitable for up to 1x16mm2 conductorDimensions


Flush metal:SB628

VX3712PS

VX3700PS

Flat

Pla

te

32


6AX ISOLATOR


VX3013 _ _ TP Fan Isolator 1

• BS EN 60669-1, BS EN 60947-3• Terminals suitable for 4x1.0mm2 or 3x1.5mm2 conductorsDimensions


Flush metal:SB655VX3013PS

TELEPHONE OUTLETS


VX3974 _ _ Telephone Master 1VX3984 _ _ Telephone Secondary 1

Dimensions88mmx88mm

Mounting boxesFlush metal:SB655

VX3974PB

COAXIAL OUTLET


VX3992 _ _ 1 gang non isolated 1VX3993 _ _ 2 gang non isolated 1

• BS 3041 where applicableDimensions

88mmx88mmMounting boxes

Flush metal:SB655

VX39992PS

BLANKING PLATES


VX3991 _ _ 1 gang blank plate 1VX3996 _ _ 2 gang blank plate 1

Dimensions1 gang 88mmx88mm2 gang 148mmx88mm

VX3991PS

SHAVER SOCKET


VX3800 _ _ Dual Voltage Shaver Socket 1

• BSEN 61558• Terminals suitable 2x2.5mm2 conductorsDimensions


Flush metal:SB628

VX3800SS

Flat Plate

33


The elegance of Georgian andthe sophistication of Victorian provide two finishes to meet the needs ofany residential environment.Manufactured from quality cast brass,with oven-baked lacquer coating foradded protection.Volex cast brass isavailable fitted with black interiors asstandard, white available on request.

Dec

orat

ive

Bra

ss

34

250W DIMMERS


VB0250_ _PU 1 gang push on/off dimmer 10VB0252_ _PU 2 gang push on/off dimmer 5

• Complies with EMC directive• Terminal suitable for 3x1.5mm2 conductors• Can be used 1 or 2 way• For use with tungsten filament lamp only

Dimensions94.6mmx94.6mm


VB0252GEPU VB0252VIPU

400W DIMMERS


VB0400_ _PU 1 gang push on/off dimmer 5

• Complies with EMC directive• Can be used 1 or 2 way• For use under tungsten filament lamp only


Mounting boxFlush metal: SB655

VB0400GEPU VB0400VIPU

Decorative Brass

35

Decorative Brass Accessories are available in the following finishes: GE-Georgian or VI-Victorian. Indicate the finish that you require by addingthe suffix to the list number. eg.VB1020GE (standard interiors are black)

10AX PLATE SWITCHES


VB1020 _ _ 1 gang 2 way switch 5VB1030 _ _ 1 gang intermediate switch 5VB1040 _ _ 2 gang 2 way switch 5VB1050 _ _ 3 gang 2 way switch 5VB1054 _ _ 4 gang 2 way switch 5

• BS EN 60669-1, BS3676• Terminals suitable for 4x1mm2 2x2.5mm2 or 3x1.5mm2 conductors• Fully rated at 10AX for fluorescent loads

Dimensions1–3 gang: 94.6mmx94.6mm4 gang: 154.5mmx94.6mm

Mounting boxesFlush metal: 1–3 gang SB623; 4 gang SB665

VB1020GE VB1020VI

20A DP SWITCHES


VB1060 _ _ 20A DP switch with neon 5

• BS EN 60669-1, BS3676• Terminals suitable for 3x2.5mm2 or 2x4.0mm2 conductor


Mounting boxesFlush metal:SB655Flush PVC:VX8111

VB1060GE VB1060VI

VB9702GE VB9702VI

45A DP SWITCHES


VB9702 _ _ 45A DP switch with neon 5

• BS3676• Terminals suitable for up to 1x16mm2 cable



13A SOCKET OUTLETS


VB1300 _ _ 1 gang SP switched socket 5VB1500 _ _ 2 gang SP switched socket 5

• BS1363• Terminals suitable for up to 3x2.5mm2 or 2x4.0mm2 conductors• Double pole switching avaialble. Suffix list no. -/D i.e.VB1500GE/D• 2 gang DP sockets come with twin earth as standard

Dimensions1 gang: 94.6mmx94.6mm, 2 gang: 154.5mmx94.6mm

Mounting boxesFlush metal: 1 gang SB655; 2 gang SB665

VB1500GE VB1500VI

2A SOCKET OUTLET


VB9901 _ _ Socket outlet 5

• BS546



VB9901GE VB9901VI

Dec

orat

ive

Bras

s

36

Decorative Brass Accessories are available in the following finishes: GE-Georgian or VI-Victorian. Indicate the finish that you require by addingthe suffix to the list number. eg.VB1020GE (standard interiors are black)

VB9992GE VB9992VI

VB1080GE VB1081VI

COAXIAL TV OUTLET


VB9992 _ _ 1 gang coaxial outlet, non-isolated 5





VB1080 _ _ Switched fuse connection unit 5VB1081 _ _ Switched fuse connection unit with neon 5

• BS1363• Terminals suitable for 3x2.5mm2 or 2x4.0mm2 conductors



TELEPHONE OUTLETS


VB9974 _ _ 1 gang master 5VB9984 _ _ 1 gang secondary 5


Mounting boxesFlush metal:SB655

BLANKING PLATES


VB9991 _ _ 1 gang 5VB9996 _ _ 2 gang 5

Dimensions1 gang: 94.6mmx94.6mm2 gang: 154.5mmx94.6mm

WHITE INTERIORS

Both the Georgian and Victorian ranges are available in whiteAdd suffixW to list number, eg VB1300GEW

VB9984GE VB9984VI

VB9991GE VB9991VI

VB1500GEW VB1500VIW

Decorative Brass

37

Designed for use in the industrial andcommercial environment, the VolexMetalclad range is manufactured frommild steel and coated in epoxy resin.Each product is supplied complete witha mounting box in a matching finish, fittedwith an earth terminal.

Met

alcl

ad

38

10AX SWITCHES


VX1020SG 1 gang 2 way 5VX1030SG 1 gang intermediate 5VX1040SG 2 gang 2 way 5VX1050SG 3 gang 2 way 5VX1054SG 4 gang 2 way 5

• BS EN 60669-1• Terminals suitable for 4x1.0mm2,3x1.5mm2,or 2x2.5mm2 conductors• Fully rated at 10AX for fluorescent and inductive loads

Dimensions1 gang 86.7mmx86.7mmx44mm2 gang 143.9mmx86.7mmx44mm



VX1060SG 1 gang with neon indicator 5VX1060FSG 1 gang with neon, front flex outlet & cord grip 5VX1070SG 1 gang 5VX1070FSG 1 gang with front flex outlet & cord grip 5

• BS EN 60669-1• Terminals suitable for up to 3x2.5mm2 to 2x4mm2 conductors• Cord outlet, suitable for flexible cord up to 10mm2

Dimensions86.7mmx86.7mmx44mm

VX1020SG VX1040SG

VX1050SG

VX1060SG VX1060FSG

VX1070SG VX1070FSG

Metalclad

39

45A DP SWITCHES


VX9702SG 45A DP switch with neon 1VX9703SG 45A DP switch 1

• BS EN 60669-1• Terminals suitable for conductor sizes up to 1x16mm2

• The following markings are available; add the appropriate suffix tothe list number, eg VX9702SG/CK:COOKER – CKSHOWER – SHAIR CONDITIONING – AC


13A SOCKET OUTLETS


VX9100SG 1 gang socket 5VX9200SG 2 gang socket 5VX1300SG 1 gang SP switched 5VX1500SG 2 gang SP switched 5VX1400SG 1 gang SP switched with neon 5VX1600SG 2 gang SP switched with neon 5

• BS1363• Terminals suitable for 3x2.5mm2 or 2x4mm2 conductors• Double pole switching available. Suffix list no. -/D i.e.VX1500SG/D• 2 gang DP sockets come with twin earth as standard

Dimensions1 gang: 86.7mmx86.7mmx44mm2 gang: 143.9mmx86.7mmx44mm

VX9702SG VX9703SG

VX1300SG VX1500SG

13A 30mA METALCLAD RCD PROTECTED SOCKETS& FCU


VT1108SG 1 gang switched RCD protected socket outlet 1VT1208SG 2 gang switched RCD protected socket outlet 1VT1092SG RCD Fused Connection Unit 1

• Socket outlets to BS7288• Double pole switching• Terminals suitable for 3x2.5mm2 or 2x4.0mm2 conductors

Dimensions1 gang: 86.7mmx86.7mmx44mm2 gang: 143.9mmx86.7mmx44mmVT1108SG VT1208SG

VT1092SG

Met

alcl

ad

40



VX1080SG DP switched 5VX1080FSG DP switched with front flex outlet & cord grip 5VX1081SG DP switched with neon 5VX1081FSG DP switched with neon, front flex outlet & cord grip 5VX1090SG 13A unswitched 5VX1090FSG 13A unswitched with front flex outlet & cord grip 5VX1091SG 13A unswitched with neon 5VX1091FSG 13A unswitched with neon, front flex outlet &

cord grip 5

• BS1363• Terminals suitable for 3x2.5mm2 or 2x4mm2 conductors• Cord outlet suitable for flexible cord up to 10mm2


VX1080SG VX1080FSG

15A ROUND PIN SWITCHES


VX9900SG Switched socket outlet 5

• BS546• 1 gang shuttered single pole


BLANKING PLATES


VX9991SG 1 gang 5VX9996SG 2 gang 5

Dimensions1 gang 86.7mmx86.7mmx44mm2 gang 143.9mmx86.7mmx44mm

VX9900SG

VX9991SG VX9996SG

Metalclad

41

The Volex panel mounting range of interiors is suitable for a wide variety ofOEM applications, from perimeter trunking to decorative accessories.Available in white or brown, the same quality features are offered as inthe rest of the accessory range, including double pole switching on socketsand arc shielding on 10AX and 20A switches.

Interiors

43

10AX SWITCHESLIST NO DESCRIPTION CARTON QTY

MC1020 1 gang 2 way 10MC1030 1 gang intermediate 10MC1040 2 gang 2 way 10MC1050 3 gang 2 way 10MC1054 4 gang 2 way 5

• BS EN 60669-1, BS3676• Terminals suitable for 4x1.0mm2, 3x1.5mm2, 2x2.5mm2 conductors• Black mouldings available to order. Suffix list no. with

– BK for Black i.e. MC1040BK

CONTROL SWITCHESLIST NO DESCRIPTION CARTON QTY

MC1060 20A DP switch unit with neon 10MC9702 45A DP switch unit with neon 5

• BS EN 60669-1, BS3676• MC1060 terminals suitable for 3x2.5mm2 or 2x4.0mm2

conductors• MC9702 terminals suitable for 1x16mm2 conductor• Black mouldings available to order. Suffix list no. with


SOCKET OUTLETSLIST NO DESCRIPTION CARTON QTY

MC9100 13A 1 gang Unswitched socket 10MC9200 13A 2 gang Unswitched socket 5MC1300 13A SP 1 gang switched socket 10MC1500 13A SP 2 gang switched socket 5MC9901 2A 1 gang Unswitched socket 10

• BS1363/BS5546 as appropriate• Terminals suitable for up to 3x2.5mm2 or 2x4.0mm2 conductors• Double pole switching available. Suffix list no. -/D ie MC 1500/D• 2 gang DP sockets come with twin earth as standard• Black mouldings available to order. Suffix list no. with – BK for Black

i.e. MC1500BK

13A FUSED CONNECTION UNITSLIST NO DESCRIPTION CARTON QTY

MC1080 13A switched fused connection unit 10MC1081 13A switched fused connection unit with neon 10

• BS1363• Terminals suitable for 3x2.5mm2 or 2x4.0mm2 conductors• Black mouldings available to order. Suffix list no. with


MC1040BK MC1050

MC1060BK MC9702

MC1500BK MC9901BK

MC1080 MC1081

Inte

rior

s

44

FAN ISOLATOR


MC1013 Triple Pole Fan Isolator 10

• BSEN 60947-3• 250V only

MC1013

RCD SOCKETS & FCU


MC1108 1 gang Switched RCD Socket Outlet 1MC1208 2 gang Switched RCD Socket Outlet 1MC1092 Fused Connection Unit 1

• Socket outlets to BS7288• Double pole switching• Terminals suitable for 3x2.5mm2 or 2x4.0mm2 conductors

MC1092 MC1208

COMMUNICATION OUTLETS


MC9992 1 gang coaxial TV outlet, non-isolated 10MC9993 2 gang coaxial TV outlet, non-isolated 10MC9974 1 gang telephone master outlet 10MC9984 1 gang telephone secondary outlet 10

• Black mouldings available to order. Suffix list no. with – BK for Black i.e. MC9992BK

MC9993BK MC9974

Interiors

45

A comprehensive range of PVC andUrea surface mounted boxes areavailable for Volex accessories.

This unique Volex conversion unit provides asimple method of converting a single flushmounted accessory into a slim surface mounted3 gang unit.

Inst

alla

tion

Boxe

s

46

Installation Boxes

47SURFACE MOUNTING BOXES


VX9404 1 gang moulded, 20mm deep with earth terminal 10VX9409 1 gang moulded, 29mm deep 10VX9405 1 gang moulded, 42mm deep 10VX9412 2 gang moulded, 20mm deep with earth terminal 10VX9414 2 gang moulded, 29mm deep 5VX9415 2 gang moulded dual, 29mm deep 5VX9417 2 gang moulded, 32mm deep 5VX9416 2 gang moulded, 35mm deep with cable clamp 10VX9410 2 gang moulded, 47mm deep with cable clamp 5VX9403 3 gang moulded, 29mm deep 5VX9401 1 gang architrave moulded, 19mm deep 10VX9402 2 gang architrave moulded, 19mm deep 10

• BS5733

VX9409 VX9414

CONVERSION PATTRESSES


VX9406 2 gang socket pattress, 20mm deep 5VX9143 3 gang socket pattress, 20mm deep 5

• This unique range provides the ideal method to convert a flushmounted 1 gang socket to a slim surface mounted 2 or 3 gangversion

VX9406

VX9143

In the home, workshop or outdoors, any factors such as dampness, faulty wiring, frayedcords and other hazards can contribute towards a potentially lethal situation when usingelectric irons, extension leads, lawn mowers, hedge trimmers and other portable electricalequipment and appliances.

Protector residual current device (RCD) products provide personal protection andminimise the risk of electric shock from earth faults.

For added safety, the electronic sensing device within Protector products becomes activeonly when the reset button is pressed.

Prot

ecto

r:R

CD

Wir

ing

Acc

esso

ries

48

13A 30mA METALCLAD RCD PROTECTED SOCKETS& FCU


VT1108SG 1 gang switched RCD protected socket outlet 1VT1208SG 2 gang switched RCD protected socket outlet 1VT1092SG RCD Fused Connection Unit 1

• Socket outlets to BS7288• Double pole switching• Terminals suitable for up to 3x2.5mm2 or 2x4.0mm2 conductors

Dimensions1G: 86.7mmx86.7mmx44mm2G: 143.9mmx86.7mmx44mm

VT1092

REWIREABLE RCD PLUG


VT1952 13A 30mA rewireable RCD plug 1

• BS7071• Suitable for attaching to appliance cables to provide earth-fault

protection to suit the user• Unit is mains dependant, so will trip out automatically on loss

of power

VT1952

PORTABLE RCD ADAPTOR


VT1951 13A 30mA portable RCD adaptor 1

• BS7071• Suitable for use with most portable electric tools and appliances,

providing earth-fault protection from the socket outlet• Unit is mains dependent, so will trip out automatically on loss

of power

VT1951

VT1108 VT1208

13A 30mA FLUSH RCD PROTECTED SOCKETS& FCU


VT1108 1 gang switched RCD protected socket outlet 1VT1208 2 gang switched RCD protected socket outlet 1VT1092 RCD Fused Connection Unit 1

• Socket outlets to BS7288• Double pole switching• Terminals suitable for up to 3x2.5mm2 or 2x4.0mm2 conductors

Dimensions1G: 86mmx86mm with 60.3mm fixing centresFCU: 86mmx86mm with 60.3mm fixing centres2G: 146mmx86mm with 120.6mm fixing centres

Mounting boxesSurface moulded: 1G & FCU:VX9405 2G:VX9417Flush metal: 1G & FCU: SB615 2G: SB625

Protector:RC

D W

iring Accessories

49

VT1108SG VT1208SG

Protector:Consum

er Units

51The Volex Circuit Protection Range includes ConsumerUnits, MCBs, RCBOs and RCCBs.Standard Consumer Units from 2 to 19 outgoing ways.RCCB incomer Consumer Units from 2 to 11 ways.Split Load Consumer Units maximum 17 ways.Split Load units can be configured on site.This flexibleapproach offers 22 different configurations from justfour models.The Range is designed to be easy to install and ideallysuited to domestic applications with:● Factory fitted incomers for speed of installation.● Cable entries on all sides for versatility on site.● Full DIN rail for secure MCB fixing and stress

free busbar connections.● Floating Busbar caters for last minute changes

in specification.● Neutral and Earth bars located at the top of the

enclosure giving maximum wiring space.● Two Pole 30mA RCBOs for maximum Safety.

● Pre-printed labels provided eg: Ring Main,Lights, for a professional finish.

VCU0

VCU9

VCU6

VCU7

VCU4

RCCB INCOMER

LIST NO RCCB RATING WAYS

VCU13 63A 30mA 2VCU2 80A 30mA 5VCU4 80A 30mA 8VCU10 80A 30mA 11

MAIN SWITCH INCOMER

LIST NO RATING MCB WAYS

VCU0 63A 2VCU1 100A 5VCU3 100A 8VCU8 100A 11VCU9 100A 19

SPLIT LOAD (100A MAIN SWITCH & 80A 30mA RCD)

LIST NO WAYS SWITCH WAYS RCD WAYS

VCU5 6 4 23 32 4

VCU7 9 6 35 44 53 62 7

VCU6 12 8 47 56 65 74 8

VCU11 17 12 511 610 79 88 97 106 115 124 13

Prot

ecto

r:C

onsu

mer

Uni

ts

52

VB06 VB10 VB16 VB20 VB32 VB40 VB50

VRCBO3230

RCBOs (COMBINED MCB & RCCB)

LIST NO DESCRIPTION

VRCBO1630 16A 30mA RCBOVRCBO3230 32A 30mA RCBOVRCBO4030 40A 30mA RCBO

• BS EN 61009• 6kA 230V AC• C Curve• Double Pole

MINIATURE CIRCUIT BREAKERS (MCBs)

LIST NO DESCRIPTION

VB06 6A single poleVB10 10A single poleVB16 16A single poleVB20 20A single poleVB32 32A single poleVB40 40A single poleVB50 50A single poleVCUBLPP Combined 1 way cover & Busbar blank

• BS EN 60898• 6kA 230V AC• B Curve

RCCBs

LIST NO DESCRIPTION

VR25 25A Double Pole 30mAVR40 40A Double Pole 30mAVR63 63A Double Pole 30mAVR80 80A Double Pole 30mA

• BS EN 61008• 230V AC• Double PoleMounting Enclosures:• VRE2 General purpose enclosure 25/40A RCD• VRE4 General purpose enclosure 63/80A RCD

SSppeecciiffiiccaattiioonn Standards Compliance Rated Voltage Operating Characteristic Terminal Capacities

Consumer Units BS EN 60439-3 230V AC - -

Main Switch BS EN 60947-3 230V AC AC22 35mm2

RCCBs BS EN 61008-1 230V AC Type AC 35mm2

MCBs BS EN 60898 230V AC B Curve 6kA 25mm2

RCBOs BS EN 61009 230V AC C Curve 6kA 30mA 25mm2

VR80

Protector:Consum

er Units

53

Tech

nica

l Inf

orm

atio

n &

Num

eric

Inde

x

54TECHNICAL DATA& NUMERIC INDEX

F

G

H

IR0.60.5

R1

R1.6

K EL

J

CD

AB

E

MC1080 VCU1

VX9706VX1010

Technical Information

55WIRING CIRCUITS FOR 10AX SWITCHES

One way circuits

Two way circuits

Intermediate circuits

TECHNICAL CAPACITIES (mm2)

The following table summarises the terminal capacities of theprincipal wiring accessories.

Description Conductor size

10AX switches 4x1mm2, 3x1.5mm2, 2x2.5mm2

20A DP switch 3x2.5mm2, 2x4.0mm2, 1x6.0mm2, 1x10mm2

45A DP switch 2x6.0mm2, 1x10mm2, 1x16mm2

13A socket outlet 3x2.5mm2, 2x4.0mm2

13A fused connection unit 3x2.5mm2, 2x4.0mm2

RECOMMENDED QUANTITY OF SOCKETOUTLETS FOR DOMESTIC INSTALLATIONS

An installation may have too few socket outlets or the existingsocket outlets may be incorrectly situated. Both conditions aresymptomatic of an inadequate installation which could lead topotentially dangerous improvisation.

The following is a summary of the recommendations of theElectrical Installation Industry Liaison Committee.All socketoutlets should be of the twin switched type.

Room Number of sockets

Kitchen 6

Lounge 6

Dining room 4

Double bedroom 4

Single bed-sitting room 4

Single bedroom 4

Landing/Stairs 1

Hall 2

Garage 2

Store/Workroom 2

Central heating boiler point 1

L1

L2 L2

L1

L3 L3

N

L

L1

L2 L2

L1

L3 L3

N

L

N

L

L1 L2

N

L

L2N2

N1 L1

L1

L2 L1 L2 L2

L1

L3 L3 L4 L3

N

L

L1

L2 L1 L2 L2

L1

L3 L3 L4 L3

N

L

Moulded (surface) Metal (flush) Drylining (flush)Product List no box List no box List no box List no

10A switch 1 gang VX1010 VX9404 SB623 SB61910A switch 1 gang VX1020 VX9404 SB623 SB61910A switch 1 gang VX1030 VX9404 SB623 SB61910A switch 2 gang VX1040 VX9404 SB623 SB61910A switch 3 gang VX1050 VX9404 SB623 SB61910A switch 4 gang VX1054 VX9412 SB665 SB62913A socket 1 gang VX9100 VX9409 SB655 SB61913A socket 1 gang VX1300 VX9409 SB655 SB61913A socket 1 gang VX1400 VX9409 SB655 SB61913A socket 2 gang VX9200 VX9414 SB665 SB62913A socket 2 gang VX1500 VX9414 SB665 SB62913A socket 2 gang VX1600 VX9414 SB665 SB62913A socket 2 gang VX1700 VX9414 SB665 SB62913A socket 2 gang VX1800 VX9414 SB665 SB62913A socket 3 gang VX9230 VX9403 SB646 –20A switch VX1060 VX9409 SB655 SB61920A switch VX1070 VX9409 SB655 SB61950A ceiling switch VX9706 VX9405 – –45A switch VX9702 VX9416 SB628 SB63145A switch VX9703 VX9416 SB628 SB63145A switch VX9712 VX9405 SB618 SB63245A switch VX9713 VX9405 SB618 SB632Cooker unit VX9700 VX9416 SB628 SB631Cooker unit VX9701 VX9416 SB628 SB631Fused connection unit VX1080 VX9409 SB655 SB619Fused connection unit VX1081 VX9409 SB655 SB619Fused connection unit VX1090 VX9409 SB655 SB619Fused connection unit VX1091 VX9409 SB655 SB619Telephone socket VX9974 VX9404 SB655 SB619Secondary socket VX9984 VX9404 SB655 SB6192 module mounting plate VX9062 VX9405 SB615 SB6194 module mounting plate VX9064 VX9416 SB625 SB629Shaver unit VX9800 VX9410 SB628 SB631TV outlet 1 gang VX9992 VX9409 SB655 SB619TV outlet 2 gang VX9993 VX9409 SB655 SB61913A flex outlet plate VX9990 VX9409 SB655 SB619Cooker outlet plate VX9704 VX9405 SB615 SB632

GUIDANCE ON THE USE OF LAMPHOLDERS MARKED T1 OR T2

Tech

nica

l Inf

orm

atio

n

56

The information in the table is a guide to theuser of lampholders marked T1 or T2 withtungsten filament lamps, although it shouldbe appreciated that the critical factor is theactual temperature of the cap of the lampwhen in use.Technical information on suchtemperatures is contained in this specificationand in BS EN 60598-1. It is also important toensure that the wattage rating of the lamp isnot higher than that for which the particularshade or luminaire is designed.This maximumrating in watts is marked on all shades andluminaires that comply with BS4533: Part101.The recommendations in the table refer totypical conditions, in single lamp luminaires orinstallations, and in multi lamp luminaireshaving widely spaced lamps.Where lamps arein close proximity to each other, or in totallyenclosed luminaires, it is recommended thatT2 lampholders are used.

SBC Small bayonet cap (international type B15d)

BC Standard bayonet cap (international type B22d)

T1 Lampholder suitable for conditions up to a lamp captemperature of 165°C

T2 Lampholder suitable for conditions up to a lamp captemperature of 210°C

Closed shade Shade open at one end only and generallymounted directly on the lampholder

Open shade Shade open at both ends, and generallymounted on the lampholder by a wire frame

Cap up Position of lamp, typically when suspended fromthe ceiling by a flexible cord

Cap down Position of lamp, typically when fitted on astandard or table lamp

Where two symbols are shown together, as inB15d-T1/T2 or B22d-T2, there is no restriction onthe type of shade or the position of the lamp, pro-vided the maximum working temperatures are notexceeded

If in doubt regarding the choice of any lampholder,always use one marked T2

RECOMMENDED MOUNTING BOXES FOR MOULDED VOLEX WIRING ACCESSORIES

Flush box recommendationsas shown in the adjacenttable.

Industrial metalcladaccessories(suffix SG) are suppliedcomplete with matchingsurface mounting boxes.

Maximum permitted rating of lamp

Typical conditions of use MaximumLampholder Type of shade Lamp position permitted

Size Type Temperature Closed Open Cap up Cap down rating of lamp

SBC B15d T1 40W

SBC B15d T2 60W

BC B22d T1 – – 60W

BC B22d T1 – – 100W

BC B22d T1 – – 150W

BC B22d T1 – – 200W

BC B22d T2 200W

CFL COMPACT FLUORESCENT LAMPHOLDERThe design of the Lampholder accepts an industry standard 4 pin 10/13 Watt Compact Fluorescent G24 lamp.This reduces the power consumption,when compared to an equivalent incandescent lamp, by up to 80%.

The Lampholder is designed to European standards and has a diameter of 42mm, which is larger than the typical Lampholder which is 29mm.

A Safety feature which protects the installation will disconnect the supply to the Lampholder:-During a lamp change, when no lamp is present, or in the case of lamp failure at the end of lamp life.This Safety feature is reset by switching the supply to the fitting off for 10 to 15 seconds.

Technical Information

57CUT OUT DETAILS FOR INTERIOR RANGE (dimensions in mm)

10AX/20A switch interiors

LIST NO A B C D E F

All 1 gang 60.3 17.1 30.6 – – –MC1040 60.3 33.4 30.6 – – –MC1050 60.3 49.7 30.6 – – –MC1054 120.6 33.4 30.6 40.2 – –MC1060 60.3 17.1 30.6 28.4 4.5 9.4

to4.7

MC1013 60.3 47.9 30.6

DA

B B

C

R1.0

BA

C

R1.0

A

C

R1.0

B

D

F

E

45A DP switch

LIST NO A B C D E F

MC9702 120.7 42.2 24.5 34.9 9.4 4.5to4.7

C

B

R1.5

A

E

F

D

13A Fused connection units

LIST NO A B C D E F G H I J K

MC1080 60.3 48.0 17.0 38.0 29.0 – 14.0 14.0 – – –MC1081 60.3 48.0 17.0 38.0 29.0 23.0 14.0 14.0 9.45 11.35 20.3

to to9.60 11.50

MC1090 60.3 22.0 17.0 38.0 29.0 – 14.0 14.0 – – –MC1091 60.3 22.0 17.0 38.0 29.0 23.0 14.0 14.0 9.45 11.35 20.3

to to9.60 11.50

F

J

I KB

A

C

DE

G

H

Telephone outlets

LIST NO A B C D

MC9974 60.3 23.3 20.3 4.6MC9984 60.3 23.3 20.3 4.6

C

A

B D

R1.5

Coaxial outlet

LIST NO A B C

MC9992 60.3 – 17.3MC9993 60.3 25.4 17.3

A

C

A

C C

B

13A single socket outlet interiors

LIST NO A B C D E F G H I J K L M N

MC1300 60.3 12.0 15.4 5.7 28.6 30.4 10.8 38.8 14.2 38.4 – – – –MC1400 60.3 12.0 15.4 5.7 28.6 30.4 10.8 38.8 14.2 38.4 23.0 11.35 9.45 20.3

to to11.50 9.60

13A twin socket outlet interiors

LIST NO A B C D E F G H I J K L

MC1500 120.6 84.4 30.4 5.7 14.2 38.4 – – – 28.6 29.9 –MC1600 120.6 84.4 30.4 5.7 14.2 38.4 23.0 11.35 9.45 28.6 29.9 101.2

to to11.50 9.60

RCD socket outlet interiors

LIST NO A B C D E F G H I J K L M N O P QMC1092 60.3 14.39 38.4 27.15 13.4 44.46 37.85 24.4 10.25 20.5 12.0 33.59 - - - - -MC1108 60.3 19.0 24.6 26.4 38.4 12.3 29.55 12.1 27.15 13.4 46.45 38.35 26.4 12.2 36.7 36.35 -MC1208 38.40 19.0 24.6 36.35 27.15 26.05 28.3 12.1 27.15 13.4 26.4 37.65 46.45 12.2 68.0 86.4 36.7

J

K

L

MR0.60.5

R1.0

R1.6

IN B

C

E

FD

GHA

I

F

G

H

IR0.60.5

R1

R1.6

K EL

J

CD

AB

E

A

Q

O

N

P

B JIE

C

F

HGD

L

R2.70

R3.30

KM

R2.70

R1.70

R2.30

R1.60R2.30

60˚

O

N

B

H

DCF

G P

LM

K

AR2.70

11.20

R2.70R2.30

R3.30

R1.60

JIE

R1.60

60˚ 19.50

27.50

IJ

B KL

GH

F

A

R1.70

R2.70

R1.60

EDC

R2.30

60˚

Tech

nica

l Inf

orm

atio

n

58

All units are supplied complete with factoryfitted main switch and/or RCCB, topmounted neutral and earth bars, associatedbusbars, Installation Instructions and circuitidentification labels.

In split-load units the main switch is fittedon the left of the unit and the RCCB on theright making the selection of split betweenRCCB and the main switch easier toconfigure on site.

All outgoing MCBs and RCBOs fit securelyonto full DIN rail with main connectionsmade by means of a specially designed combbusbar which can be cut to length required.

This method enables the installer to assembleunits to suit the circuit requirements of eachinstallation and affords maximum flexibility.

SSppeecciiffiiccaattiioonn Standards Terminal Tripping RatedCompliance capacities Characteristic Voltage

Consumer Units BS EN 60439-3

Main Switch BS EN 60947-3 35mm 230V

RCCBs BS EN 61008-1 35mm Type AC 230V

MCBs BS EN 60898 25mm Type B, 6kA 230V

RCBOs BS EN 61009 25mm Type C, 6kA 30mA 230V

DDiimmeennssiioonnss ((mmmm))List No A B C

VCU0 118 160 103VCU1 190 211 107VCU2 190 211 107VCU3 243 211 107VCU4 243 211 107VCU5 243 211 107VCU6 344 211 107VCU7 294 211 107VCU8 294 211 107VCU9 439 211 107VCU10 294 211 107VCU11 439 211 107VCU13 118 160 103

1 1.5 2 3 4 53 5

6 810 15 20 300.01

0.02

0.040.060.1

0.2

0.40.6

1

2

46

10

20

401

2

46

10

20

4060

120

Tri

pp

ing

tim

eM

inu

tes

Sec

on

ds

1.13 1.45

7Multiple of rated current

acdc

Classification of MCB PerformanceBSEN 60898 -Type B

CONSUMER UNITS

A C

B

Index

59CA1075 9

CA1076 9

CA2001 9

CA2001L 9

MC1013 45

MC1020 44

MC1030 44

MC1040 44

MC1050 44

MC1054 44

MC1060 44

MC1080 44

MC1081 44

MC1092 45

MC1108 45

MC1208 45

MC1300 44

MC1500 44

MC9100 44

MC9200 44

MC9702 44

MC9901 44

MC9974 45

MC9984 45

MC9992 45

MC9993 45

VB0250GEPU 35

VB0250VIPU 35

VB0252GEPU 35

VB0252VIPU 35

VB0400GEPU 35

VB0400VIPU 35

VB06 53

VB10 53

VB1020GE 35

VB1020VI 35

VB1030GE 35

VB1030VI 35

VB1040GE 35

VB1040VI 35

VB1050GE 35

VB1050VI 35

VB1054GE 35

VB1054VI 35

VB1060GE 36

VB1060VI 36

VB1080GE 37

VB1080VI 37

VB1081GE 37

VB1081VI 37

VB1300GE 36

VB1300VI 36

VB1500GE 36

VB1500VI 36

VB16 53

VB20 53

VB32 53

VB40 53

VB50 53

VB9062GE 17

VB9062VI 17

VB9064GE 17

VB9064VI 17

VB9702GE 36

VB9702VI 36

VB9901GE 36

VB9901VI 36

VB9974GE 37

VB9974VI 37

VB9984GE 37

VB9984VI 37

VB9991GE 37

VB9991VI 37

VB9992GE 37

VB9992VI 37

VB9996GE 37

VB9996VI 37

VCU0 52

VCU1 52

VCU10 52

VCU11 52

VCU13 52

VCU2 52

VCU3 52

VCU4 52

VCU5 52

VCU6 52

VCU7 52

VCU8 52

VCU9 52

VCUBLPP 53

VG3201SG 25

VG3203SG 25

VG3206SG 25

VG3209SG 25

VG3430 24

VG3435 24

VG3436 24

VG3450 24

VG3451 24

VG3460 24

VG3460BO 24

VG3460DW 24

VG3460EF 24

VG3460FF 24

VG3460FR 24

VG3460FZ 24

VG3460HB 24

VG3460HD 24

VG3460HT 24

VG3460MW 24

VG3460TD 24

VG3460WA 24

VG3460WD 24

VG3460WDR 24

VG3460WM 24

VG3461 24

VG3469 24

VG3489 24

VG3490 24

VG3490/1 24

VG3491 24

VG3492 24

VG3493 24

VG3494 24

VG3530 24

VG3535 24

VG3550 24

VG3551 24

VG3552 24

VG3570PS 25

VG3570SB 25

VG3570SS 25

VG3570WH 25

VG3571 25

VG3571SB 25

VG3571PS 25

VG3571SS 25

VG3572 25

VG3572PS 25

VG3572SB 25

VG3572SS 25

VG3573 25

VG3573PS 25

VG3573SB 25

VG3573SS 25

VG3574 25

VG3574PS 25

VG3574SB 25

VG3574SS 25

VG3576 25

VG3576PS 25

VG3576SB 25

VG3576SS 25

VG3578PS 25

VG3578SB 25

VG3578SS 25

VG3578WH 25

VG3579PS 25

VG3579SB 25

VG3579SS 25

VG3581SG 25

VG3582SG 25

VG3583SG 25

VG3584SG 25

VG3586SG 25

VG3588SG 25

VG3901 24

VG3902 24

VG3903 24

VG3904 24

VG3940 24

VR25 53

VR40 53

VR63 53

VR80 53

VRCBO1630 53

VRCBO3230 53

VRCBO4030 53

VT1092 8, 49

VT1092SG 40, 49

VT1108 8, 49

VT1108SG 40, 49

VT1208 8

VT1208 49

VT1208SG 40, 49

VT1507 8

VT1951 49

VT1952 49

VT7066 12

VX0009 21

VX0010 21

VX0011 21

VX0018 21

VX0030 13

VX0042 13

VX0205 20

VX0205HO 20

VX0208HO 20

VX0218HO 20

VX0219 21

VX0250PSPU 27

VX0250PU 5

VX0250SBPU 27

VX0250SSPU 27

VX0252PSPU 27

VX0252PU 5

VX0252SBPU 27

VX0252SSPU 27

VX0400PSPU 27

VX0400PU 5

VX0400SBPU 27

VX0400SSPU 27

VX0402PSPU 27

VX0402SBPU 27

VX0402SSPU 27

VX0580 13

VX0850 19

VX0851 19

VX1/T2 20

VX1/T2HO 20

VX1000 4

VX1010 4

VX1013 10

VX1013PS 27

VX1013SB 27

VX1013SS 27

VX1020 4

VX1020PS 27

VX1020SB 27

VX1020SG 39

VX1020SS 27

VX1030 4

VX1030PS 27

VX1030SB 27

VX1030SG 39

VX1030SS 27

VX1040 4

VX1040PS 27

VX1040SB 27

VX1040SG 39

VX1040SS 27

VX1050 4

VX1050PS 27

VX1050SB 27

VX1050SG 39

VX1050SS 27

VX1054 4

VX1054PS 27

VX1054SB 27

VX1054SG 39

VX1054SS 27

VX1060 10

VX1060AC 10

VX1060FPS 27

VX1060FSB 27

VX1060FSG 39

VX1060FSS 27

VX1060PS 27

VX1060SB 27

VX1060SG 39

VX1060SS 27

VX1060WH 10

VX1060WHSS 27

VX1060WHPS 27

VX1060WHSB 27

VX1060WHFSS 27

VX1060WHFPS 27

VX1060WHFSB 27

VX1060WM 10

VX1070 10

VX1070AC 10

VX1070FPS 27

VX1070FSB 27

VX1070FSG 39

VX1070FSS 27

VX1070PS 27

VX1070SB 27

VX1070SG 39

VX1070SS 27

VX1070WH 10

VX1070WM 10

VX1080 9

VX1080BO 9

VX1080DW 9

VX1080EF 9

VX1080FF 9

VX1080FPS 28

VX1080FR 9

VX1080FSB 28

VX1080FSG 41

VX1080FSS 28

VX1080FZ 9

VX1080HB 9

VX1080HD 9

VX1080HT 9

VX1080MW 9

VX1080PS 28

VX1080SB 28

VX1080SG 41

LIST NO PAGE NO LIST NO PAGE NO LIST NO PAGE NO LIST NO PAGE NO LIST NO PAGE NO

Inde

x

60 VX1080SS 28

VX1080TD 9

VX1080WD 9

VX1080WDR 9

VX1080WH 9

VX1080WM 9

VX1081 9

VX1081FPS 28

VX1081FSB 28

VX1081FSG 41

VX1081FSS 28

VX1081PS 28

VX1081SB 28

VX1081SG 41

VX1081SS 28

VX1090 9

VX1090FPS 28

VX1090FSB 28

VX1090FSG 41

VX1090FSS 28

VX1090PS 28

VX1090SB 28

VX1090SG 41

VX1090SS 28

VX1091 9

VX1091FSG 41

VX1091SG 41

VX1117 13

VX1118 13

VX1119 13

VX1300 8

VX1300/D 8

VX1300PS 28

VX1300SB 28

VX1300SG 40

VX1300SS 28

VX1302 13

VX1307 13

VX1307BK 13

VX1321 13

VX1321BK 13

VX1322 13

VX1390 13

VX1393 13

VX1400 8

VX1400PS 28

VX1400SB 28

VX1400SG 40

VX1400SS 28

VX1500 8

VX1500/D 8

VX1500PS 28

VX1500SB 28

VX1500SG 40

VX1500SS 28

VX1600 8

VX1600PS 28

VX1600SB 28

VX1600SG 40

VX1600SS 28

VX1700 8

VX1800 8

VX20/2 21

VX2060 4

VX2061 4

VX2062 4

VX3010PB 31

VX3010PS 31

VX3010SS 31

VX3013PB 32

VX3013PS 32

VX3013SS 32

VX3020PB 31

VX3020PS 31

VX3020SS 31

VX3030PB 31

VX3030PS 31

VX3030SS 31

VX3040PB 31

VX3040PS 31

VX3040SS 31

VX3050PB 31

VX3050PS 31

VX3050SS 31

VX3054PB 31

VX3054PS 31

VX3054SS 31

VX3060PB 32

VX3060PS 32

VX3060SS 32

VX3080B 31

VX3080PS 31

VX3080SS 31

VX3081PB 31

VX3081PS 31

VX3081SS 31

VX3090PB 31

VX3090PS 31

VX3090SS 31

VX3250PBPU 31

VX3250PSPU 31

VX3250SSPU 31

VX3252PBPU 31

VX3252PSPU 31

VX3252SSPU 31

VX3300PB 31

VX3300PS 31

VX3300SS 31

VX3400PBPU 31

VX3400PSPU 31

VX3400SSPU 31

VX3500PB 31

VX3500PS 31

VX3500SS 31

VX3700PB 32

VX3700PS 32

VX3700SS 32

VX3712PB 32

VX3712PS 32

VX3712SS 32

VX3800PB 33

VX3800PS 33

VX3800SS 33

VX3905PB 31

VX3905PS 31

VX3905SS 31

VX3974PB 33

VX3974PS 33

VX3974SS 33

VX3984PB 33

VX3984PS 33

VX3984SS 33

VX3991PB 33

VX3991PS 33

VX3991SS 33

VX3992PB 33

VX3992PS 33

VX3992SS 33

VX3993PB 33

VX3993PS 33

VX3993SS 33

VX3996PB 33

VX3996PS 33

VX3996SS 33

VX4522 20

VX5207 10

VX5208 10

VX6080 17

VX6081 17

VX6082 17

VX6651 13

VX6652BK 13

VX6653 13

VX6654BK 13

VX6677 19

VX6678 19

VX6679 19

VX6681CFL 19

VX6850 19

VX9001 5, 21

VX9002 5, 21

VX9009 5

VX9023 21

VX9023BK 21

VX9029 21

VX9029BK 21

VX9062 17

VX9062PS 17, 29

VX9062SB 17, 29

VX9062SS 17, 29

VX9064 17

VX9064PS 17, 29

VX9064SB 17, 29

VX9064SS 17, 29

VX9074 20

VX9100 8

VX9100PS 28

VX9100SB 28

VX9100SG 40

VX9100SS 28

VX9200 8

VX9200PS 28

VX9200SB 28

VX9200SG 40

VX9200SS 28

VX9215 19

VX9215HO 19

VX9230 8

VX9401 47

VX9402 47

VX9403 47

VX9404 47

VX9405 47

VX9406 47

VX9409 47

VX9410 47

VX9412 47

VX9413 47

VX9414 47

VX9415 47

VX9416 47

VX9417 47

VX9700 11

VX9700PS 28

VX9700SB 28

VX9700SS 28

VX9701 11

VX9701PS 28

VX9701SB 28

VX9701SS 28

VX9702 11

VX9702AC 11

VX9702CK 11

VX9702PS 27

VX9702SB 27

VX9702SG 40

VX9702SH 11

VX9702SS 27

VX9703 11

VX9703AC 11

VX9703CK 11

VX9703PS 27

VX9703SB 27

VX9703SG 40

VX9703SH 11

VX9703SS 27

VX9704 11

VX9706 12

VX9706 21

VX9712 11

VX9712AC 11

VX9712CK 11

VX9712SH 11

VX9713 11

VX9713AC 11

VX9713CK 11

VX9713PS 27

VX9713SB 27

VX9713SH 11

VX9713SS 27

VX9800 12

VX9800PS 29

VX9800SB 29

VX9800SS 29

VX9900 9

VX9900PS 28

VX9900SB 28

VX9900SG 41

VX9900SS 28

VX9901 9

VX9901PS 28

VX9901SB 28

VX9901SS 28

VX9904 9

VX9906 9

VX9907 9

VX9960 16

VX9970 17

VX9971 17

VX9972 17

VX9974 16

VX9974PS 29

VX9974SB 29

VX9974SS 29

VX9977 17

VX9978 17

VX9980 17

VX9981 17

VX9982 16

VX9984 16

VX9984PS 29

VX9984SB 29

VX9984SS 29

VX9986 16

VX9987 17

VX9988 17

VX9989 17

VX9990 12

VX9991 16

VX9991PS 29

VX9991SB 29

VX9991SG 41

VX9991SS 29

VX9992 16

VX9992PS 29

VX9992SB 29

VX9992SS 29

VX9993 16

VX9993PS 29

VX9993SB 29

VX9993SS 29

VX9996 16

VX9996PS 29

VX9996SB 29

VX9996SG 41

VX9996SS 29

LIST NO PAGE NO LIST NO PAGE NO LIST NO PAGE NO LIST NO PAGE NO LIST NO PAGE NO

Electrium Sales Ltd.Term

s & C

onditions

61HOME1 Contract Terms Quotations & Orders1.1 Unless other terms and conditions are expressly accepted by

Electrium by means of a specific written amendment heretosigned by Electrium or a Director of Electrium the contract willbe on the terms and conditions set out below (“the ContractTerms”) to the exclusion of any other terms and conditions(except those implied in favour of a seller which are not incon-sistent with the Contract Terms) whether or not the same areendorsed upon, delivered with or referred to in any purchaseorder or other document delivered or sent by the Customer toElectrium or by Electrium to the Buyer reference made byElectrium to the Customer’s order, specification or like docu-ment will not be deemed to imply that any terms or conditionsendorsed upon, delivered with or referred to in such order,specification or like document will have effect to the exclusionor amendment of the Contract Terms. No variation, addition ormodification of the Contract Terms conditions shall be bindingon Electrium unless such variation, addition or modification beagreed to in writing under the signature of a Director ofElectrium.

1.2 Any quotation is given on the basis that no contract will comeinto existence until the Customer places an order pursuantthereto.Any quotation is valid for a period of 30 days only fromits date provided that Electrium has not previously withdrawn it.

2 PriceThe price of Goods supplied hereunder (“the Goods”) is exclusive ofVAT or any successor tax thereto unless otherwise agreed in writing.The price for the Goods shall be (unless otherwise agreed byElectrium in writing) the list price of Electrium current at the date ofdespatch and in the case of an order for delivery by instalments theprice payable for each instalment shall be Electrium’s list price cur-rent at the date of despatch for each instalment.All prices are basedon standard pack sizes and quantities and Electrium reserves theright to levy an additional charge if such packs must be broken up tofulfil an order.The price of Goods is inclusive of costs of carriage tothe Customer’s premises in Great Britain and Northern Irelandexcept on individual orders having a net value calculated by referenceto the Company’s most recent price list of less than £200 (excludingVAT) which shall be subject to an additional charge of not less than£15.00 (excluding VAT) to cover carriage and packing.The price ofGoods is based on the costs of materials, labour, sub-contracts, trans-port, taxes, duties and currency exchange rates ruling at the date ofthe quotation. Electrium reserves the right to amend the contractprice to take account of any variations in these costs or the imposi-tion of any new taxes or duties occurring from whatever causebefore delivery of the Goods.3 PaymentThe due date for payment shall be the last day of the month follow-ing the month of despatch of Goods supplied by Electrium. Paymentmade before the due date for payment shall be subject to a settle-ment discount of 2.5%.VAT is calculated on the discounted value ofthe invoice and is not subject to settlement discount. Interest at anannual rate of 3% per month will accrue daily and be calculated on adaily basis on overdue accounts from the date of invoice until pay-ment. Notwithstanding any Contract Term allowing the Customercredit payment shall become due and payable to Electrium immedi-ately upon the termination of the contract.The Customer shall notbe entitled to exercise any right of set-off or lien or any similar rightor claim in connection with the Goods or the price payable therefor.4 Packing MaterialsPacking cases and cartons will be provided free of charge byElectrium.All pallets used shall remain at all times the property ofElectrium and are to be returned to Electrium on demand in goodcondition. Electrium reserves the right to alter the method of pack-ing without reference to the Customer.5 Damage or Loss in TransitElectrium will not be liable in respect of any damage or discrepancy,shortage or loss in transit or any claim that the Goods delivered donot otherwise comply with the contract unless the Customer shallhave informed the Company in writing, telex or facsimile as follows:(a) Within three days of delivery in the event of any damage, dis-

crepancy or shortage.(b) Within seven days of delivery in the event that the Goods do

not comply with the contract,and(c) Within twenty-one days of receipt of the Company’s invoice in

the event of non-delivery.Where the Goods are accepted from the Company’s carriers theyshall be deemed to have been checked by the Purchaser and accept-ed unless the delivery receipt is signed and endorsed ‘unexamined’and the packing and its contents are retained for later inspection.6 DeliveryThe place of delivery for Goods shall be the Customer’s premises oras otherwise agreed by Electrium in writing.The time of delivery willbe as agreed between the parties or if no such agreement has beenreached will be within a reasonable time and the Company will beentitled to make delivery by instalments. In no circumstances willElectrium be liable for loss or damage of any kind whatsoever causeddirectly or indirectly by any delay in the delivery of Goods, norunless such delay exceeds 180 days will any delay entitle theCustomer to terminate or rescind the contract. Notwithstanding anyother Contract Term, risk in the Goods shall pass to the Buyer whenthe Goods are delivered to the Customer or its agent.7 Title of GoodsUntil Electrium has been paid in full for the Goods comprised in thisand/or any other contract between the Customer and Electrium, theCustomer shall hold the Goods in a fiduciary capacity as bailee forElectrium and:(i) the title to, ownership of, and the property in, the Goods shall

remain vested in Electrium (notwithstanding delivery of thesame and parting of the risk therein to the Customer) until pay-ment in full for all Goods comprised in this and every othercontract between Electrium and the Customer has beenreceived by Electrium.

(ii) The Customer shall be in possession of the Goods asElectrium’s bailee. If so required the Customer shall store theGoods for Electrium without charge to Electrium separate fromany goods which are the property of the Customer and/or anythird party and ensure that they are clearly marked and identi-fied as belonging to Electrium.

(iii) Electrium reserves the right to require the Customer to returnthe Goods and may recover and sell the same at any time. Forthat purpose Electrium’s servants and agents together with all

necessary and appropriate transport shall be entitled to unre-stricted access to the Customer’s premises and any other loca-tion where the Goods are situated to take possession of theGoods and, if necessary, dismantle the Goods from any articleor articles to which they may have been attached and toremove the Goods from the Customer’s premises.

(iv) Prior to the property in the Goods passing to the CustomerElectrium permits the Customer to deliver the Goods to athird party pursuant to a bona fide and arms-length agreementto re-sell the Goods and allows the Customer to convert orincorporate the Goods into or mix the Goods with othergoods but such liberty will cease upon the termination of thecontract.

(v) Where Electrium is unable to determine whether any goods areElectrium’s Goods the Customer shall be deemed to have soldall goods of the kind sold by Electrium to the Customer in theorder in which they were invoiced to the Customer.

8 Descriptive MatterDescriptive matter, illustrations, dimensions and weights issued byElectrium are to be regarded as being for guidance only and cannotbe held as binding in any way. In pursuance of Electrium’s policy ofproduct improvement Electrium reserves the right to alter patternsand designs without prior notice.9 GuaranteeElectrium will make good by replacement (or its option by repair)defects which under proper use appear in the Goods within a periodof twelve calendar months after the Goods have been despatched,and which arise solely from faulty design, materials or workmanshipprovided always that defective Goods have been returned toElectrium and Electrium was notified of the defect or suspecteddefect immediately the same became known to the Customer.Thecost of carriage on such returned Goods and the cost of re-deliveryof the repaired or new Goods to be borne by Electrium. Save for theElectrium’s control equipment which has been correctly repaired ormodified by the use of standard parts supplied by Electrium for suchpurpose, Electrium excludes all liability in respect of any Goodswhich have been re-finished and dismantled or altered in any way orif the Goods were improperly installed or connected or if theCustomer fails to observe or perform the requirements of any main-tenance procedures relating to the Goods.Any Goods replaced willbelong to Electrium.Any repaired or replacement Goods will beguaranteed on these terms for the unexpired portion of the twelvemonth period. In addition, the obligations of Electrium under thiscondition will not apply if the Customer is in breach of this or anyother contract with Electrium. Subject to this condition, all condi-tions, warranties and representations, whether express or implied (bystatute or otherwise) relating to the Goods are hereby excludedinsofar as the same can be excluded without such exclusion beingvoid or unenforceable.Electrium will be under no liability under the contract for any per-sonal injury, death, loss or damage of any kind whatsoever (otherthan death or personal injury resulting from Electrium’s negligence)whether consequential or otherwise including but not limited to lossof profits and Electrium hereby excludes all conditions, warrantiesand stipulations express or implied, statutory, customary or other-wise which but for such exclusion would or might subsist in favourof the Customer except that such exclusion will not apply to anyimplied condition that Electrium has or will have the right to sell theGoods when the property is to pass; or when Electrium deals as aconsumer (as defined in section 12 of the Unfair Contract Terms Act1977), any implied term relating to the conformity of the Goods withtheir description or sample or as to their quality or fitness for a par-ticular purpose. In no circumstances will Electrium or its employees,agents or sub-contractors be liable for any loss or damage of anykind whatsoever (other than death or personal injury resulting fromElectrium’s negligence) whether consequential or otherwise causeddirectly or indirectly by any negligence or other tortious act orbreach of statutory duty on the part of Electrium or on the part ofany of its employees, agents or sub-contractors in connection withor arising out of the manufacture or supply of the Goods or in con-nection with any statement given or made (or advice not given ormade) by or on behalf of Electrium.10 PatentsElectrium will indemnify the Customer against any claim of infringe-ment of letters patent, registered design, trademark or copyright(existing at the date of the contract) arising from the use or sale ofany article or materials supplied by Electrium to the Customer andagainst all costs and damages which the Customer may incur in anyaction for such infringement or for which the Customer maybecome liable in any such action provided always that this indemnityshall not apply to any infringement which arises in connection withany design or instruction issued or given by the Customer toElectrium or to the use of such article or material in a manner orfor a purpose outside the UK or to any infringement which is due tothe use of such article or material in association or combination withany other article or material not supplied by Electrium and providedalso that this indemnity is conditional on the Customer making noadmission in respect of such alleged infringement and givingElectrium the earliest possible notice in writing of any claim beingmade or action threatened or brought against the Customer and onthe Customer permitting Electrium at Electrium’s expense to con-duct any litigation that may ensue and all negotiations for the settle-ment of a claim.The Customer warrants that any design or instruction issued orgiven by the Customer shall not be such as will cause Electrium toinfringe any letters patent, registered design, trademark or copyrightin the execution of the Customer’s order and the Customer agreesto indemnify and keep Electrium indemnified against all liability in theevent that such warrant is found to be untrue, misleading or breached.11 AdviceAdvice which Electrium or its agents may give to the Customer shallbe given in good faith but Electrium shall not be liable for any loss ordamage arising directly or indirectly therefrom or attributable there-to unless contained in any written representation or statementissued directly by Electrium.

12 SafetyThe Customer shall ensure that any modifications whatsoever madeto the Goods supplied hereunder comply with the requirements ofany applicable Safety Regulations. Plugs supplied hereunder shall beso connected as to ensure that they are safe and in full compliancewith any applicable Safety Regulations. The Customer shall ensurethat any kits supplied hereunder are so assembled as to ensure thatthe assembled product is safe and complies with the requirements ofany applicable Safety Regulations.Without prejudice to the aboveprovisions, where Electrium provides the Customer with information

about the use for which Goods are designed and have been testedand about any conditions to ensure that when put to that use theywould be safe and without risk to health, the Customer shall use theGoods accordingly and comply with the said conditions.To be prop-erly used the Goods shall be selected, installed, commissioned andmaintained in accordance with good engineering practice and underthe supervision of suitably qualified personnel.13 Statutory and other RegulationsIf the cost to Electrium of performing its obligations under any con-tract shall be increased or reduced by reason of making or amend-ment after the date of its quotation of any law or of any other order,regulation or bye-law having the force of law that shall affect the per-formance of Electrium’s contractual obligations, the amount of suchincrease or reduction shall be added to or deducted from the con-tract price as the case may be.14 CancellationIf the Customer cancels, extends or delays or purports to cancel,extend or delay the contract or part thereof, or fails to take deliveryof any Goods at the time agreed (if any) or if no time is agreed with-in a reasonable time, then the Customer will be liable (without preju-dice to any other rights of Electrium to claim damages) to indemnifyand keep indemnified Electrium against any resulting loss, damage orexpense incurred by Electrium in connection with the supply or non-supply of the Goods including the cost of any material, used orintended to be used therefor and the cost of labour and other over-heads including a percentage in respect of profit. If Electrium isunable (whether temporarily or permanently) to procure any servic-es or goods necessary to enable it to supply the Goods or if thesupply of the Goods is prevented or hindered by reason of any causebeyond Electrium’s reasonable control which for the avoidance ofdoubt and without prejudice to the generality of the foregoing shallinclude governmental action, war, riot, civil commotion, fire, flood,epidemic, labour disputes including labour disputes involving thework force or any part thereof of Electrium, restraints or delaysaffecting shipping or carriers, currency restrictions and Act of God,Electrium may cancel the contract by notice in writing to theCustomer so far as it relates to Goods not then supplied or worknot then done and such cancellation shall not give rise to any claimsby the Customer provided that the Customer shall remain liable topay for Goods delivered prior to the date of such cancellation.15 General(a) The headings herein are inserted for convenience only and shall

not affect the interpretation of the Contract Terms.(b) Should any clause contained in the Contract Terms be held to

be invalid such invalidity will not affect the validity of theremaining clauses.

(c) Any dispute arising out of this contract or the Contract Termsshall be referred in writing to an independent arbitrator whoshall be appointed by agreement between Electrium and theCustomer or in default of agreement by the President for thetime being of the Institute of Electrical Engineers whose deci-sion shall be binding on both parties.

(d) The formation, interpretation and operation of the contract willbe subject to English Law and the Customer submits himself tothe non-exclusive jurisdiction of the English Courts.

(e) Electrium will be entitled to assign sub-contract or sub-let thecontract or any part thereof.

(f) Failure by Electrium to enforce any of the Contract Termswill not be construed as a waiver of any of its rights here-under.

EXPORTAll Contract Terms set out above apply to overseas transactions (iesales outside the United Kingdom), where appropriate, except thefollowing:1.2 Any quotation is given on the basis that no contract will come

into existence until Electrium despatches an acknowledgementof order to the Customer.Any quotation is valid for a period of 30 days only from its date provided that Electrium has notpreviously withdrawn it.

2 PriceThe price of Goods includes the cost of packing for shipment FOBBritish Port or Airport except that orders having a net value of £500and below shall be subject to an additional charge to cover packingand carriage. No allowance will be made in lieu of transportation ifthe Customer accepts delivery at the factory, container depot or atany other inland destination or provides his own transportation orwhere packing of a lesser standard is required.3 PaymentFirst orders from overseas Customers should be accompanied bybank references to enable payment terms to be agreed. Unless oth-erwise agreed in writing, payment is due on delivery. Goods shall bedeemed to have been delivered when the invoice has been presentedin the United Kingdom accompanied by the appropriate documentsof title.16 OthersThe Goods will be sold FOB British Port or Airport and the Sellerwill be under no obligation to give the Buyer notice as specified inSection 32(3) of the Sale of Goods Act 1979. CIF or C & F arrange-ments can be made if requested by the Customer, at cost, andElectrium will, on receipt of Customer’s indemnity, take all reasonablesteps to recover from the Underwriters any loss or damage forwhich they may be liable.The Customer shall be solely responsible for complying with all legis-lation and regulations governing the importation of the Goods intothe country of destination including import and export licences andthe payment of duties thereon including but not limited to customsduties and VAT.The Customer shall indemnify Electrium against allcosts claims and demands arising out of any breach by the Customerof this Agreement.

CONDITIONS OF USEThe products listed in this publication should be installed by suitablyqualified personnel in accordance with the requirements of relevantlegislation, regulations (including the IEE Wiring Regulations) and theaccepted practice in the industry.Any further information which maybe required about the use for which any specific product has beendesigned and tested, or about conditions of use, is available onrequest. In pursuance of our policy of continuing product improve-ment, equipment described in this publication is subject to changewithout notification.

ELECTRIUM SALES LIMITEDCommercial Centre, Lakeside Plaza, Walkmill Lane,

Bridgtown, Cannock WS11 0XE.eMail: [email protected] Web: www.electrium.co.uk

UK SALESTelephone: 01543 455030 Facsimile: 01543 455031

eMail: [email protected]

Although every effort has been made to ensure accuracy in the compilation of thetechnical detail within this publication, specifications and performance data are

constantly changing. Latest details can be obtained from Volex.

Publication No.V1990 08/05Printed in England.

wiring accessories circuit protection · 2019-10-13 · ceiling accessories 18 grid system 22 metal...

Documents