with round corners - unifold · with round corners embossing max. format 600x340mm. unifold sarl ·...
TRANSCRIPT
unifold sarl · 18 rue de haspelschiedt · 57230 bitche · francephone 0033 387-960097 · fax 0033 387-960652 · [email protected] · www.unifold.info
HIGHCLASS CASEMAKINGwith round corners
embossing
max. format 600x340mm
unifold sarl · 18 rue de haspelschiedt · 57230 bitche · francephone 0033 387-960097 · fax 0033 387-960652 · [email protected] · www.unifold.info
model 8416cutting machinefor formats up to 1.600 x 600 mm30 tons pressure
- handsliding table for positioning material outside the cutting area
- free view over complete cutting surface- precise electronic controlled cutting depth- cutting stroke adaptable by operator
according to requirement- easy setup for different height of cutting dies- precise cutting in all areas of cutting surface- can be used for materials in sheets or rolls
upon request
extension with 4-roll-rack
single rollholder with clamping device on sliding table
model 8400plastic cutting machinefor formats up to 1.600 x 600 mm40 tons pressure
- receeding head- free view over complete cutting surface- precise cutting in all areas of cutting surface- precise electronic controlled cutting depth
- cutting stroke adaptable by operator according to requirement- easy setup for different height of cutting dies- can be used for materials in sheets or rolls
4-roll-rack with clamping device
cutting
upon request
enlarged embossing head250 x 100 mm
unifold sarl · 18 rue de haspelschiedt · 57230 bitche · francephone 0033 387-960097 · fax 0033 387-960652 · [email protected] · www.unifold.info
embossingmodel 8125hot stamping and embossing machinefor formats up to 150 x 100 mm
very accurate setup for depth of embossingfine tuning of embossing position on the product8 kN pneumatic pressureembossing surface 150 x 100 mmsetup function to fix embossing dies using heat sticking foilaccurate foil feed by motorexchangeable baseplate with adjustable guides
model 8340large area embossing machinefor formats up to 580 x 350 mm
10 tons hydraulic pressureprecise control of embossing depthby mechanical stopsetup function for fixing embossing diesautomatic sliding table for positioning outside pressing zone
example for finished diaries
enlarged embossing head250 x 100 mm
-----
--
--
--