wnt new milling gradeskt-nw-02-14-00142_en... · 2014. 12. 11. · 4 the new grades, in combination...

New New products for cutting tool engineers

WNT (UK) Ltd. • Sheffield Business Park • S9 1XU Sheffield • Tel. 0800 073 2 073 • [email protected] • www.wnt.com

January 2015

New milling grades for the machining of

Cast ironSteel Stainless

2 www.wnt.com

Dragonskin – the next generation of coating technology

Legendary Performance

Decades of experience and consistent and continuous development of new and unique coating processes are behind the development of the new Dragonskin coating technology. Above all, and through our innovation and expertise in powder metallurgy, we can achieve an unprecedented level of performance in machining. As with the invulnerability of Dragonskin, the new WNT Dragonskin coating technology offers maximum protection against wear, and has been developed with an almost impenetrable layer for the toughest requirements. Emerging from this is an elegant, satin coating with an extremely hard and indestructible surface that sets new standards. The perfect combination of ultra modern high performance substrates and novel coating structures allow high cutting speeds and increased process security. Unlimited application possibilities puts everything that has gone before in the shade! A proven – up to 80% – increase in performance with the new Dragonskin coating technology offers a significant competitive advantage.

the first choice for machining non, low and high alloyed steels

... the first choice for machining austenitic, ferritic and martensitic stainless steels

... the first choice for machining all abrasive non-ferrous metals

... the first choice for the machining of gray, ductile and malleable irons and sintered steels

... the first choice for machining heat resistant alloys based on nickel, chromium, cobalt and titanium

New Dragonskin CoatingDragonskin – the correct Dragon for every material type

Milling tools with indexable inserts + mould and die production

www.wnt.com 3

The New Dimension in Milling

Most Advanced Treatment Process

Special Layer Structure

Under the new smooth surface is a sequence of layers. The latest coating technology produces a base layer with a higher toughness. In combination with the increased adhesion of the cover layer the total layer thickness was increased.

State of the art treatment technologies produce an extremely smooth surface, which has a positive effect on the contact friction between chip and rake face. The result: reduction in wear while increasing service life.

User benefits• increased tool life• highest process security• wide application range

Increasing productivity demands means greater demands on the tool. To meet the ever increasing requirements of the market, proven grades for milling inserts throughout the ISO P, M and K areas have been revised. We guarantee customers the competitive edge in both process security and productivity.

• perfect chip evacuation with simultaneous increase in service life

• reduced cutting pressure• minimal sticking of the chip• significantly less wear and therefore

lower unit costs

Specific Advantages

New Dragonskin Coating

New Dragonskin Coating

Previous

Previous


4 www.wnt.com

The new grades, in combination with our milling systems, demonstrate clearly superior wear resistance with the same tool life.

Flank Face

vc = 191 m/min f = 0.35 mm ap = 1 mm – 3 mm ae = 80 %

vc = 191 m/min f = 0.35 mm ap = 1 mm – 3 mm ae = 80 %

MillingHousing1.2343(X37CrMoV5-1) face milling system A2710 insert: SAKU 1706ABSR-M50

In the brief overview below, summarized and listed are the corresponding grades for steel, stainless steel and cast iron. From now on you will find our indexable inserts with the new Dragonskin coating - the new dimension in milling.

Toollifeapprox.70mins

WNT CWX 26Flank FaceWNT DCX 1230

The new grade designations

Field Report

Previous New

CWX26 DCX1230

CWN31DPX1235

HCN1235

Previous New

none DPX2225

none DCX2235

HCN2235 DPX2240

Previous New

CWX3215 DCX3215

HCN3220 DPX3220


www.wnt.com 5

Grade description Grade Description Stand

ard de

signa

tion

P M K N S H

Steel

Stainl

ess

Cast

iron

Non f

errou

s meta

ls

Heat

resist

ant

Harde

ned m

ateria

ls

Steel

DCX1230 Dry machining of steels high metal removal rates

P30 ●

M25 ○

DPX1235 specialist for wet machining unstable conditions in machining steel

P35 ●

M30 ○

Stainless

DPX2225 wear resistant grade for machining austenitic materialsM25 ●

P25 ○

DCX2235 martensitic steel materials tough alternative for machining general steel

M35 ●

P40 ○

DPX2240 optimum grade for machining austenitic materials in small batch sizes

M40 ●

P40 ○

Cast iron

DCX3215 machining of cast iron workpieces suitable for higher cutting speeds

K15 ●

DPX3220 tougher version for high tensile cast iron materials difficult to machine workpiece surfaces

K20 ●

●

○

Main application

Extended application

Grades Overview


6 www.wnt.com

System 2740-04-09

OFHT 7

SF.T 8

System 2740-05-12

OFHT 9

SF.T 9

System 2710-17

SAKU 10+11

System 2730-06

OAKU 12+13

XAHT 13

System 2700-09

SD.T 14

XDHW 14

System 2700-12

SD.. 15+16

XDHW 16

System 2700-15

SDH. 17

System 1203-12

SEK. 18

System HEC-11

LNHX 19

System HFC

XPLX 20

XDLX 20

XOLX 21

System 2011-07

XDKT 22

Table of contentsSystem 2011-11

XDKT 23+24

System 2011-15

XDKT 25+26

System 4900-09

SDNT 27

System 4900-12

SD.T 28

System 2100-10

APKT 29

System 2410-15

LD.. 30

System C BF

L.H. 31

System C NF

CPMT 32

System 2510

R..X 33-36

System C KF

R... 37

ISO inserts

A.KT 38

L... 38

SE.. 39

SP.. 39+40

TP.. 40

WP.. 41


www.wnt.com 7

OFHT / SFHT / SFKTDesignation d d1 l l1 s r α° mm mm mm mm mm mm OFHT 0403.. 9.52 3.35 3.94 - 3.18 0.5 25SF.T 0903.. 9.80 3.35 9.00 2.25 3.50 1.0 25

OF..

42

3

1

s

d1

l 1

l

r

d

α

SF.T

OFHT-F50 -F50 -F50 -F50 -F50DCX 1230

DPX 1235

DPX 2225

DCX 2235

DPX 2240

OFHT OFHT OFHT OFHT OFHTPG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no.

ISO r 51 002 ... 51 002 ... 51 002 ... 51 002 ... 51 002 ...mm £ £ £ £ £

040305SN 0.5 12.46 51002005 12.46 51002105 12.46 51002205 12.46 51002305 12.46 51002405

Steel ● ● ○ ○ ○Stainless steel ○ ○ ● ● ●Cast iron Non ferrous metals Heat resistant alloys hardened materials

OFHT-M50 -M50 -M50 -M50DCX 1230

DPX 1235

DPX 2240

DCX 3215

OFHT OFHT OFHT OFHTPG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no.

ISO r 51 003 ... 51 003 ... 51 003 ... 51 003 ...mm £ £ £ £

040305SN 0.5 12.46 51003005 12.46 51003105 12.46 51003405 12.46 51003505

Steel ● ● ○ ○Stainless steel ○ ○ ● Cast iron ●Non ferrous metals Heat resistant alloys hardened materials

System 2740-04-09


8 www.wnt.com

SFHT-F50 -F50 -F50 -F50 -F50DCX 1230

DPX 1235

DPX 2225

DCX 2235

DPX 2240

SFHT SFHT SFHT SFHT SFHTPG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no.

ISO r 51 012 ... 51 012 ... 51 012 ... 51 012 ... 51 012 ...mm £ £ £ £ £

0903AFSR 1.0 12.46 51012020 12.46 51012120 12.46 51012220 12.46 51012320 12.46 51012420


SFKT-M50 -M50 -M50 -R50 -R50DCX 1230

DPX 1235

DPX 2225

DCX 3215

DPX 3220

SFKT SFKT SFKT SFKT SFKTPG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no.

ISO r 51 013 ... 51 013 ... 51 013 ... 51 065 ... 51 065 ...mm £ £ £ £ £

0903AFSR 1.0 9.19 51013020 9.19 51013120 9.19 51013220 9.19 51065520 9.19 51065620

Steel ● ● ○ ○ ○Stainless steel ○ ○ ● Cast iron ● ●Non ferrous metals Heat resistant alloys hardened materials

System 2740-04-09


www.wnt.com 9

OFHT / SFKT / SFHTDesignation d d1 l l1 s r α° mm mm mm mm mm mm OFHT 0504.. 12.7 4.8 4.5 4.50 4.76 1.0 25SF.T 1204.. 12.7 4.8 12.7 1.42 4.76 1.0 25

OF..

42

3

1

s

d1

l 1

l

r

d

α

SF.T

OFHT-F50 -M50DPX 2225

DPX 2225

OFHT OFHTPG 1B PG 1BArticle no. Article no.

ISO r 51 002 ... 51 003 ...mm £ £

050410SN 1.0 13.72 51002210 13.72 51003210

Steel ○ ○Stainless steel ● ●Cast iron Non ferrous metals Heat resistant alloys hardened materials

SFKT / SFHT-M50 -M50 -F50 -F50 -M50 -M50 -M50DCX 1230

DPX 1235

DPX 2225

DCX 2235

DPX 2225

DCX 2235

DPX 2240

SFKT SFKT SFHT SFHT SFKT SFKT SFKTPG 1B PG 1B PG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no. Article no. Article no.

ISO r 51 013 ... 51 013 ... 51 012 ... 51 012 ... 51 013 ... 51 013 ... 51 013 ...mm £ £ £ £ £ £ £

1204AFSR 1.0 10.11 51013025 10.11 51013125 13.72 51012225 13.72 51012325 10.11 51013225 10.11 51013325 10.11 51013425

Steel ● ● ○ ○ ○ ○ ○Stainless steel ○ ○ ● ● ● ● ●Cast iron Non ferrous metals Heat resistant alloys hardened materials

System 2740-05-12


10 www.wnt.com

SAKUDesignation d d1 l l1 s r α° mm mm mm mm mm mm SAKU 1706.. 17 5.8 17 3.7 6.35 0.8 3 1

3

4

2

s

d1

l 1

l

r

d

α

SAKU

SAKU-F50 -F50 -F50 -F50 -F50DCX 1230

DPX 1235

DPX 2225

DCX 2235

DPX 2240

SAKU SAKU SAKU SAKU SAKUPG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no.

ISO r 51 004 ... 51 004 ... 51 004 ... 51 004 ... 51 004 ...mm £ £ £ £ £

1706ABSR 0.8 23.06 51004020 23.06 51004120 23.06 51004220 23.06 51004320 23.06 51004420


SAKU-M50 -M50 -M50 -M50 -M50 -M50 -M50DCX 1230

DPX 1235

DPX 2225

DCX 2235

DPX 2240

DCX 3215

DPX 3220

SAKU SAKU SAKU SAKU SAKU SAKU SAKUPG 1B PG 1B PG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no. Article no. Article no.

ISO r 51 005 ... 51 005 ... 51 005 ... 51 005 ... 51 005 ... 51 005 ... 51 005 ...mm £ £ £ £ £ £ £

1706ABSR 0.8 23.06 51005020 23.06 51005120 23.06 51005220 23.06 51005320 23.06 51005420 23.06 51005520 23.06 51005620

Steel ● ● ○ ○ ○ ○ ○Stainless steel ○ ○ ● ● ● Cast iron ● ●Non ferrous metals Heat resistant alloys hardened materials

System 2710-17


www.wnt.com 11

SAKU-R50 -R50DCX 3215

DPX 3220

SAKU SAKUPG 1B PG 1BArticle no. Article no.

ISO r 51 058 ... 51 058 ...mm £ £

1706ABSR 0.8 23.06 51058520 23.06 51058620

Steel ○ ○Stainless steel Cast iron ● ●Non ferrous metals Heat resistant alloys hardened materials

System 2710-17


12 www.wnt.com

OAKU / XAHTDesignation d d1 l l1 s r α° mm mm mm mm mm mm OAKU 0605.. 17.10 5.8 6.00 2 5.66 0.8 3XAHT 0605.. 17.08 6.0 11.95 6 5.56 2.5 3

OAKU

XAHT

OAKU-F50 -F50 -F50 -F50 -F50DCX 1230

DPX 1235

DPX 2225

DCX 2235

DPX 2240

OAKU OAKU OAKU OAKU OAKUPG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no.

ISO r 51 000 ... 51 000 ... 51 000 ... 51 000 ... 51 000 ...mm £ £ £ £ £

060508SR 0.8 19.46 51000008 19.46 51000108 19.46 51000208 19.46 51000308 19.46 51000408


OAKU-M50 -M50 -M50 -M50 -M50 -M50 -M50DCX 1230

DPX 1235

DPX 2225

DCX 2235

DPX 2240

DCX 3215

DPX 3220

OAKU OAKU OAKU OAKU OAKU OAKU OAKUPG 1B PG 1B PG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no. Article no. Article no.

ISO r 51 001 ... 51 001 ... 51 001 ... 51 001 ... 51 001 ... 51 001 ... 51 001 ...mm £ £ £ £ £ £ £

060508SR 0.8 19.46 51001008 19.46 51001108 19.46 51001208 19.46 51001308 19.46 51001408 19.46 51001508 19.46 51001608


System 2730-06


www.wnt.com 13

OAKU-R50 -R50DCX 3215

DPX 3220

OAKU OAKUPG 1B PG 1BArticle no. Article no.

ISO r 51 027 ... 51 027 ...mm £ £

060508SR 0.8 19.46 51027508 19.46 51027608

Steel ○ ○Stainless steel Cast iron ● ●Non ferrous metals Heat resistant alloys hardened materials

XAHT-M50 -M50 -M50 -M50 -M50 -M50 -M50DCX 1230

DPX 1235

DPX 2225

DCX 2235

DPX 2240

DCX 3215

DPX 3220

XAHT XAHT XAHT XAHT XAHT XAHT XAHTPG 1B PG 1B PG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no. Article no. Article no.

ISO r 51 014 ... 51 014 ... 51 014 ... 51 014 ... 51 014 ... 51 014 ... 51 014 ...mm £ £ £ £ £ £ £

060525SR 2.5 24.08 51014025 24.08 51014125 24.08 51014225 24.08 51014325 24.08 51014425 24.08 51014525 24.08 51014625


System 2730-06


14 www.wnt.com

Designation d d1 l l1 s r mm mm mm mm mm mmXDHW 0903.. 9.52 3.4 5.50 - 3.18 1.0SD.T 0903.. 9.52 3.4 9.52 1.68 3.97 1.0

d

l

d1

r

r

s

15°

l 1

SD..

d1

s

15°

L

R

r

r

r

I

R

XDHW

SDNT / SDHT-29 -29 -33 -31

DCX 1230

DPX 1235

DPX 2240

DCX 3215

SDNT SDNT SDHT SDNTPG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no.

ISO r 51 011 ... 51 011 ... 51 028 ... 51 029 ...mm £ £ £ £

0903AESN 1.0 11.12 51011020 10.92 51011120 12.46 51028420 10.45 51029520


XDHW

DCX 1230

DPX 1235

DCX 3215

XDHW XDHW XDHWPG 1B PG 1B PG 1BArticle no. Article no. Article no.

ISO r 51 015 ... 51 015 ... 51 015 ...mm £ £ £

0903AEEN 1.0 14.85 510155200903AESN 1.0 16.11 51015020 15.34 51015120

Steel ● ● ○Stainless steel ○ ○ Cast iron ●Non ferrous metals Heat resistant alloys hardened materials

System 2700-09


www.wnt.com 15

SDHT / SDHW / SDMT / XDHWDesignation d d1 l l1 s mm mm mm mm mmXDHW 1204.. 12.7 5.5 7.5 - 4.76SD.. 1204.. 12.7 5.5 12.7 1.74 4.76 d

l

d1

r

r

s

15°

l 1

d1

s

15°

L

R

r

r

r

I

R

SD.. XDHW

SDHT-R -R -33

DCX 1230

DPX 1235

DPX 2240

SDHT SDHT SDHTPG 1B PG 1B PG 1BArticle no. Article no. Article no.

ISO r 51 006 ... 51 006 ... 51 028 ...mm £ £ £

1204AESN 1.0 13.61 51006020 13.23 51006120 13.61 51028425

Steel ● ● ○Stainless steel ○ ○ ●Cast iron Non ferrous metals Heat resistant alloys hardened materials

SDHW-R -R -R

DCX 1230

DPX 1235

DCX 3215

SDHW SDHW SDHWPG 1B PG 1B PG 1BArticle no. Article no. Article no.

ISO r 51 008 ... 51 008 ... 51 008 ...mm £ £ £

1204AEEN 1.0 13.61 510085201204AESN 1.0 14.18 51008020 13.61 51008120


System 2700-12


16 www.wnt.com

SDMT-29R -29R -31DCX 1230

DPX 1235

DCX 3215

SDMT SDMT SDMTPG 1B PG 1B PG 1BArticle no. Article no. Article no.

ISO r 51 010 ... 51 010 ... 51 059 ...mm £ £ £

1204AEEN 1.0 11.31 510595201204AESN 1.0 11.60 51010020 11.60 51010120


XDHW

DCX 1230

DPX 1235

DCX 3215

XDHW XDHW XDHWPG 1B PG 1B PG 1BArticle no. Article no. Article no.

ISO r 51 015 ... 51 015 ... 51 015 ...mm £ £ £

1204AEEN 1.0 17.92 510155251204AESN 1.0 19.37 51015025 18.79 51015125


System 2700-12


www.wnt.com 17

Designation d d1 l l1 s r mm mm mm mm mm mmSDH. 1504.. 15.87 5.5 15.87 1.74 4.76 0.2

d

l

d1

r

r

s

15°

l 1

SD..

SDHW / SDHT

DCX 1230

DPX 1235

SDHW SDHTPG 1B PG 1BArticle no. Article no.

ISO r 51 009 ... 51 007 ...mm £ £

1504AESN 0.2 17.63 51009020 17.92 51007120

Steel ● ●Stainless steel ○ ○Cast iron Non ferrous metals Heat resistant alloys hardened materials

System 2700-15


18 www.wnt.com

Designation d l l1 s r α° mm mm mm mm mm SEKR 1203.. 12.7 12.7 2.1 3.18 2.4 20SEKN 1203.. 12.7 12.7 2.1 3.18 2.5 20 d

l

r

r

l 1

s

α

SE..

SEKN / SEKR -29

DCX 1230

DPX 1235

DPX 1235

DCX 3215

SEKN SEKN SEKR SEKNPG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no.

ISO r 51 062 ... 51 062 ... 51 063 ... 51 062 ...mm £ £ £ £

1203AFSN 2.4 11.70 510631201203AFSN 2.5 12.08 51062020 11.70 51062120 11.31 51062520

Steel ● ● ● ○Stainless steel ○ ○ ○ Cast iron ●Non ferrous metals Heat resistant alloys hardened materials

System 1203-12


www.wnt.com 19

LNHXDesignation d d1 l s r mm mm mm mm mmLNHX 1106ZZ.. 10 4.27 11 6.35 -LNHX 110608.. 10 4.27 11 6.35 0.8LNHX 1106PN.. 10 4.27 11 6.35 -

r

LNHX

LNHX-R50 -R50 -QDCX 3215

DPX 3220

DCX 3215

DPX 3220

DCX 3215

LNHX LNHX LNHX LNHX LNHXPG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no.

ISO r 51 024 ... 51 024 ... 51 046 ... 51 046 ... 51 045 ...mm £ £ £ £ £

110608EN 0.8 20.51 510246081106PNER 20.51 51024520 20.51 51024620 20.51 51046520 20.51 510466201106ZZER 20.51 51045520 1)

Steel ○ ○ ○ ○ ○Stainless steel Cast iron ● ● ● ● ●Non ferrous metals Heat resistant alloys hardened materials

1) -Q = Wiper insert

System HEC-11


20 www.wnt.com

XPLX / XDLX / XOLXDesignation d d1 l l1 s r α° mm mm mm mm mm mm XPLX 0603.. 6.35 2.8 6 1.0 2.75 0.5 11XDLX 09T3.. 9.52 4.4 9 1.9 3.97 0.8 -XOLX 1204.. 12.70 5.5 12 1.3 4.76 1.0 -

d

l

l1

s

r

d1

R

XDLX-XOLX

α°

d

l

l1 s

r

d 1

XPLX

XPLX-M50 -M50 -M50 -M50DPX 1235

DPX 2225

DPX 2240

DCX 3215

XPLX XPLX XPLX XPLXPG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no.

ISO r 51 019 ... 51 019 ... 51 019 ... 51 019 ...mm £ £ £ £

060305SR 0.5 9.77 51019105 9.77 51019205 9.77 51019405 9.77 51019505

Steel ● ○ ○ ○Stainless steel ○ ● ● Cast iron ●Non ferrous metals Heat resistant alloys hardened materials

XDLX-M50 -M50 -M50 -M50 -M50 -M50DCX 1230

DPX 1235

DCX 2235

DPX 2225

DPX 2240

DCX 3215

XDLX XDLX XDLX XDLX XDLX XDLXPG 1B PG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no. Article no.

ISO r 51 016 ... 51 016 ... 51 016 ... 51 016 ... 51 016 ... 51 016 ...mm £ £ £ £ £ £

09T308SR 0.8 10.07 51016008 10.07 51016108 10.07 51016308 10.07 51016208 10.07 51016408 10.07 51016508

Steel ● ● ○ ○ ○ ○Stainless steel ○ ○ ● ● ● Cast iron ●Non ferrous metals Heat resistant alloys hardened materials

System HFC


www.wnt.com 21

XOLX-M50 -M50 -R50 -M50 -M50 -M50 -M50DCX 1230

DPX 1235

DPX 1235

DPX 2225

DCX 2235

DPX 2240

DCX 3215

XOLX XOLX XOLX XOLX XOLX XOLX XOLXPG 1B PG 1B PG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no. Article no. Article no.

ISO r 51 017 ... 51 017 ... 51 018 ... 51 017 ... 51 017 ... 51 017 ... 51 017 ...mm £ £ £ £ £ £ £

120410SR 1.0 12.08 51017010 12.08 51017110 12.08 51018110 12.08 51017210 12.08 51017310 12.08 51017410 12.08 51017510

Steel ● ● ● ○ ○ ○ ○Stainless steel ○ ○ ○ ● ● ● Cast iron ●Non ferrous metals Heat resistant alloys hardened materials

System HFC


22 www.wnt.com

Designation d d1 l l1 s r mm mm mm mm mm mmXDKT 070308.. 4.9 2.5 7.8 1.2 3.18 0.8XDKT 070304.. 4.9 2.5 7.8 1.2 3.18 0.4

r

s

d1

15°

l

l 1

d

XDKT

XDKT-F50 -F50 -F50DCX 1230

DPX 1235

DPX 2240

XDKT XDKT XDKTPG 1B PG 1B PG 1BArticle no. Article no. Article no.

ISO r 51 033 ... 51 033 ... 51 033 ...mm £ £ £

070304SR 0.4 9.16 51033004 9.16 51033104 9.16 51033404070308SR 0.8 9.16 51033008 9.16 51033108 9.16 51033408


XDKT-M50 -M50 -M50DCX 1230

DPX 1235

DPX 2240

XDKT XDKT XDKTPG 1B PG 1B PG 1BArticle no. Article no. Article no.

ISO r 51 036 ... 51 036 ... 51 036 ...mm £ £ £

070304SR 0.4 9.16 51036004 9.16 51036104 9.16 51036404070308SR 0.8 9.16 51036008 9.16 51036108 9.16 51036408


System 2011-07


www.wnt.com 23

Designation d d1 l l1 s r mm mm mm mm mm mmXDKT 11T325.. 6.8 2.8 10.6 1.4 3.8 2.5XDKT 11T320.. 6.8 2.8 10.6 1.4 3.8 2.0XDKT 11T312.. 6.8 2.8 10.6 1.4 3.8 1.2XDKT 11T304.. 6.8 2.8 10.6 1.8 3.8 0.4XDKT 11T332.. 6.8 2.8 10.6 1.4 3.8 3.2XDKT 11T308.. 6.8 2.8 10.6 1.4 3.8 0.8

r

s

d1

15°

l

l 1

d

XDKT

XDKT-F50 -F50 -F50 -F50 -F50DCX 1230

DPX 1235

DPX 2225

DCX 2235

DPX 2240

XDKT XDKT XDKT XDKT XDKTPG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no.

ISO r 51 034 ... 51 034 ... 51 034 ... 51 034 ... 51 034 ...mm £ £ £ £ £

11T304SR 0.4 11.12 51034004 11.12 5103410411T308SR 0.8 11.12 51034008 11.12 51034108 11.12 51034208 11.12 51034308 11.12 5103440811T312SR 1.2 11.12 5103441211T320SR 2.0 11.12 51034020 1) 11.12 51034120 1) 11.12 51034420 1)11T325SR 2.5 11.12 51034025 1) 11.12 51034125 1)11T332SR 3.2 11.12 51034432 1)


1) Insert radius >1.6 mm: Modify cutter body

System 2011-11


24 www.wnt.com

XDKT-M50 -M50 -M50 -M50 -M50 -M50 -M50DCX 1230

DPX 1235

DPX 2225

DCX 2235

DPX 2240

DCX 3215

DPX 3220

XDKT XDKT XDKT XDKT XDKT XDKT XDKTPG 1B PG 1B PG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no. Article no. Article no.

ISO r 51 037 ... 51 037 ... 51 037 ... 51 037 ... 51 037 ... 51 037 ... 51 037 ...mm £ £ £ £ £ £ £

11T304SR 0.4 11.12 51037004 11.12 51037104 11.12 51037404 11.12 5103750411T308SR 0.8 11.12 51037008 11.12 51037108 11.12 51037208 11.12 51037308 11.12 51037408 11.12 51037508 11.12 5103760811T312SR 1.2 11.12 5103741211T320SR 2.0 11.12 51037020 1) 11.12 51037120 1) 11.12 51037420 1)11T325SR 2.5 11.12 51037025 1) 11.12 51037125 1)11T332SR 3.2 11.12 51037432 1)



XDKT-R50 -R50 -R50 -R50 -R50 -R50DCX 1230

DPX 1235

DPX 2225

DCX 2235

DPX 2240

DCX 3215

XDKT XDKT XDKT XDKT XDKT XDKTPG 1B PG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no. Article no.

ISO r 51 039 ... 51 039 ... 51 039 ... 51 039 ... 51 039 ... 51 039 ...mm £ £ £ £ £ £

11T304SR 0.4 11.12 51039004 11.12 5103910411T308SR 0.8 11.12 51039008 11.12 51039108 11.12 51039208 11.12 51039308 11.12 51039408 11.12 5103950811T312SR 1.2 11.12 5103941211T320SR 2.0 11.12 51039020 1) 11.12 51039120 1) 11.12 51039420 1)11T325SR 2.5 11.12 51039025 1) 11.12 51039125 1)11T332SR 3.2 11.12 51039432 1)

Steel ● ● ○ ○ ○ ○Stainless steel ○ ○ ● ● ● Cast iron ●Non ferrous metals Heat resistant alloys hardened materials


System 2011-11


www.wnt.com 25

Designation d d1 l l1 s r mm mm mm mm mm mmXDKT 150520.. 9.3 4.4 14.8 1.6 5.56 2.0XDKT 150508.. 9.3 4.4 14.8 1.6 5.56 0.8

r

s

d1

15°

l

l 1

d

XDKT

XDKT-F50 -F50 -F50 -F50 -F50DCX 1230

DPX 1235

DPX 2225

DCX 2235

DPX 2240


ISO r 51 035 ... 51 035 ... 51 035 ... 51 035 ... 51 035 ...mm £ £ £ £ £

150508SR 0.8 14.85 51035008 14.85 51035108 14.85 51035208 14.85 51035308 14.85 51035408


XDKT-M50 -M50 -M50 -M50 -M50 -M50 -M50DCX 1230

DPX 1235

DPX 2225

DCX 2235

DPX 2240

DCX 3215

DPX 3220

XDKT XDKT XDKT XDKT XDKT XDKT XDKTPG 1B PG 1B PG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no. Article no. Article no.

ISO r 51 038 ... 51 038 ... 51 038 ... 51 038 ... 51 038 ... 51 038 ... 51 038 ...mm £ £ £ £ £ £ £

150508SR 0.8 14.85 51038008 14.85 51038108 14.85 51038208 14.85 51038308 14.85 51038408 14.85 51038508 14.85 51038608150520SR 2.0 14.85 51038120


System 2011-15


26 www.wnt.com

XDKT-R50 -R50 -R50 -R50 -R50DCX 1230

DPX 1235

DPX 2240

DCX 3215

DPX 3220


ISO r 51 040 ... 51 040 ... 51 040 ... 51 040 ... 51 040 ...mm £ £ £ £ £

150508SR 0.8 14.85 51040008 14.85 51040108 14.85 51040408 14.85 51040508 14.85 51040608150520SR 2.0 14.85 51040020 14.85 51040120

Steel ● ● ○ ○ ○Stainless steel ○ ○ ● Cast iron ● ●Non ferrous metals Heat resistant alloys hardened materials

System 2011-15


www.wnt.com 27

Designation d d1 l l1 s r mm mm mm mm mm mmSDNT 09T3.. 9.52 4.5 9.52 1.68 3.97 0.8

d

l

d1

r

r

s

15°

l 1

SD..

SDNT-29 -29 -33 -31

DCX 1230

DPX 1235

DPX 2240

DCX 3215

SDNT SDNT SDNT SDNTPG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no.

ISO r 51 011 ... 51 011 ... 51 030 ... 51 029 ...mm £ £ £ £

09T308SR 0.8 9.19 51011008 9.19 51011108 9.19 51030408 9.19 51029508


System 4900-09


28 www.wnt.com

Designation d d1 l l1 s r mm mm mm mm mm mmSDHT 1205.. 12.7 5 12.7 1.80 5 1.2SDMT 1205.. 12.7 5 12.7 0.95 5 0.8

d

l

d1

r

r

s

15°

l 1

SD..

SDMT / SDHT-29 -29 -33 -31

DCX 1230

DPX 1235

DPX 2240

DCX 3215

SDMT SDMT SDHT SDMTPG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no.

ISO r 51 081 ... 51 081 ... 51 028 ... 51 059 ...mm £ £ £ £

120512SR 1.2 14.47 510284121205ZZSN 0.8 12.46 51081020 12.46 51081120 12.08 51059521


System 4900-12


www.wnt.com 29

Designation d d1 l l1 s r mm mm mm mm mm mmAPKT 1003.. 6.65 2.8 10.8 1.1 3.5 0.5

APKT

APKT-29M -29M -29 -29 -31 -31DCX 1230

DPX 1235

DCX 1230

DPX 1235

DCX 3215

DPX 3220

APKT APKT APKT APKT APKT APKTPG 1B PG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no. Article no.

ISO r 51 078 ... 51 078 ... 51 021 ... 51 021 ... 51 041 ... 51 041 ...mm £ £ £ £ £ £

1003PDSR 0.5 10.07 51078020 10.07 51078120 10.07 51021015 10.07 51021115 10.07 51041520 10.07 51041620

Steel ● ● ● ● ○ ○Stainless steel ○ ○ ○ ○ Cast iron ● ●Non ferrous metals Heat resistant alloys hardened materials

System 2100-10


30 www.wnt.com

Designation d d1 l l1 s r mm mm mm mm mm mmLDFT 1504.. 9.52 4.4 15 0.8 4.76 1.2LD.. 1504.. 9.52 4.4 15 1.2 4.76 0.8

d1

s

d

l

rl 1

15°

L...

LDFT-29 -29 -33

DCX 1230

DPX 1235

DPX 2240

LDFT LDFT LDFTPG 1B PG 1B PG 1BArticle no. Article no. Article no.

ISO r 51 079 ... 51 079 ... 51 042 ...mm £ £ £

1504PDSR 0.8 15.72 51079020 15.14 510791201504PDSR 1.2 14.47 51042420


LDMT / LDFW-29 -29

DCX 1230

DPX 1235

DCX 1230

DCX 3215

LDMT LDMT LDFW LDFWPG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no.

ISO r 51 080 ... 51 080 ... 51 043 ... 51 043 ...mm £ £ £ £

1504PDSR 0.8 7.85 51080020 7.74 51080120 12.65 51043020 12.65 51043520

Steel ● ● ● ○Stainless steel ○ ○ ○ Cast iron ●Non ferrous metals Heat resistant alloys hardened materials

System 2410-15


www.wnt.com 31

LDHT / LEHT / LEHWDesignation d d1 l s r mm mm mm mm mmLEH. 08T1.. 5.56 2.5 8 1.98 0.4LDHT 1002.. 6.35 2.8 10 2.38 0.4

d1

s

d

l

rl 1

15°

L...

LDHT / LEHT / LEHW-29 -29

DPX 1235

DPX 1235

DPX 1235

LDHT LEHT LEHWPG 1B PG 1B PG 1BArticle no. Article no. Article no.

ISO r 51 075 ... 51 076 ... 51 077 ...mm £ £ £

08T104ER 0.4 11.70 51076104 8.89 51077104100204ER 0.4 13.23 51075104

Steel ● ● ●Stainless steel ○ ○ ○Cast iron Non ferrous metals Heat resistant alloys hardened materials

System C-BF


32 www.wnt.com

CPMTDesignation d d1 l s r mm mm mm mm mmCPMT 0603.. 6.35 2.8 6.4 3.18 0.4CPMT 09T3.. 9.52 4.4 9.7 3.97 0.8

CPMT

CPMT

DPX 1235

DPX 1235

CPMT CPMTPG 1B PG 1BArticle no. Article no.

ISO r 51 023 ... 51 074 ...mm £ £

060304EN 0.4 8.20 5102310409T308SN 0.8 9.34 51074108

Steel ● ●Stainless steel ○ ○Cast iron Non ferrous metals Heat resistant alloys hardened materials

System C-NF


www.wnt.com 33

RDHX / RPHX / RPNXDesignation d d1 s mm mm mmRDHX 0501.. 5 2.5 1.59RDHX 0802.. 8 2.8 2.38RP.X 10T3.. 10 3.4 3.97RP.X 1204.. 12 4.4 4.76RP.X 1605.. 16 5.5 5.56RPNX 2006.. 20 6.0 6.35

d

s

d1

11°

RP.X 10T3.. / RP.X 1204.. / RP.X 1605.. / RPNX 2006..

RDHX 0501.. / RDHX0802..

RDHX-SN -SN DCX 1230

DPX 1235

DCX 3215

RDHX RDHX RDHXPG 1B PG 1B PG 1BArticle no. Article no. Article no.

ISO 51 048 ... 51 048 ... 51 048 ...£ £ £0501MOSN 9.59 51048020 9.59 510481200802MOEN 9.78 510485200802MOSN 9.78 51048025 9.78 51048125


RPHX / RDHX-F50 -F50 -F50 -F50 -F50DPX 1235

DPX 2225

DCX 2235

DPX 2240

DPX 2240

RPHX RPHX RPHX RPHX RDHXPG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no.

ISO 51 051 ... 51 051 ... 51 051 ... 51 051 ... 51 083 ...£ £ £ £ £0802MOSN 9.78 5108342010T3MOSN 10.16 510514201204MOEN 11.12 51051125 11.12 510513251204MOSN 11.12 51051225 11.12 510514251605MOSN 15.14 51051430

Steel ● ○ ○ ○ ○Stainless steel ○ ● ● ● ●Cast iron Non ferrous metals Heat resistant alloys hardened materials

System 2510


34 www.wnt.com

RPHX-M30 -M30 -M30 -M50DPX 2225

DCX 2235

DPX 2240

DPX 2240

RPHX RPHX RPHX RPHXPG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no.

ISO 51 049 ... 51 049 ... 51 049 ... 51 050 ...£ £ £ £10T3MOEN 10.16 51049420 10.16 510504201204MOEN 11.12 51049225 11.12 51049425 11.12 510504251204MOSN 11.12 510493251605MOEN 15.14 51049430

Steel ○ ○ ○ ○Stainless steel ● ● ● ●Cast iron Non ferrous metals Heat resistant alloys hardened materials

RPHX-SN -SN -SN -SNDCX 1230

DPX 1235

DPX 2225

DCX 3215

RPHX RPHX RPHX RPHXPG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no.

ISO 51 052 ... 51 052 ... 51 052 ... 51 052 ...£ £ £ £10T3MOSN 10.16 51052020 10.16 51052120 10.16 510525201204MOSN 11.12 51052025 11.12 51052125 11.12 51052225 11.12 510525251605MOSN 15.14 51052030 15.14 51052130 15.14 51052530


System 2510


www.wnt.com 35

RPNX-F50 -F50 -F50DCX 1230

DPX 1235

DPX 2240

RPNX RPNX RPNXPG 1B PG 1B PG 1BArticle no. Article no. Article no.

ISO 51 055 ... 51 055 ... 51 055 ...£ £ £10T3MOEN 10.16 5105502010T3MOSN 7.74 510551201204MOEN 8.89 51055025 8.89 510551251605MOSN 12.08 510551302006MOSN 15.72 51055435


RPNX-M30 -M50 -M50 -M30 -R30DPX 1235

DCX 1230

DPX 1235

DPX 2240

DCX 3215

RPNX RPNX RPNX RPNX RPNXPG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no.

ISO 51 053 ... 51 054 ... 51 054 ... 51 053 ... 51 056 ...£ £ £ £ £10T3MOEN 7.74 5105652010T3MOSN 7.74 510540201204MOEN 8.89 510565251204MOSN 8.89 51054025 8.75 510541252006MOEN 15.72 51053120 15.72 51053420

Steel ● ● ● ○ ○Stainless steel ○ ○ ○ ● Cast iron ●Non ferrous metals Heat resistant alloys hardened materials

System 2510


36 www.wnt.com

RPNX-SN -SN -SN -SNDCX 1230

DPX 1235

DCX 3215

DPX 3220

RPNX RPNX RPNX RPNXPG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no.

ISO 51 057 ... 51 057 ... 51 057 ... 51 057 ...£ £ £ £10T3MOSN 7.74 510576201204MOSN 8.89 51057025 8.75 51057125 8.89 51057525 8.89 510576251605MOSN 12.08 51057030 12.08 51057130 12.08 51057530 12.08 510576302006MOSN 15.72 51057035 15.72 51057135 15.72 51057535 15.72 51057635

Steel ● ● ○ ○Stainless steel ○ ○ Cast iron ● ●Non ferrous metals Heat resistant alloys hardened materials

System 2510


www.wnt.com 37

R06E / R08E / R10D / R12D / R16DDesignation d d1 l s r mm mm mm mm mmR06E 0602.. 6.35 2.8 13.00 2.38 6.0R10D 0602.. 6.35 2.8 13.40 2.38 10.0R08E 0803.. 8.33 3.4 14.93 3.18 8.0R12D 0803.. 8.00 3.4 17.00 3.18 12.5R16D 10T3.. 10.00 4.4 17.00 3.97 16.0

R..D R..E

R06E / R08E / R10D / R12D / R16D-ER -SR -ER -SR -ERDPX 1235

DPX 1235

DPX 1235

DPX 1235

DPX 1235

R06E R08E R10D R12D R16DPG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no.

ISO r 51 047 ... 51 047 ... 51 047 ... 51 047 ... 51 047 ...mm £ £ £ £ £

R06E 0602ZZ 6.0 12.46 51047120R08E 0803ZZ 8.0 12.46 51047125R10D 0602ZZ 10.0 12.46 51047130R12D 0803ZZ 12.5 13.04 51047135R16D 10T3ZZ 16.0 13.70 51047140

Steel ● ● ● ● ●Stainless steel ○ ○ ○ ○ ○Cast iron Non ferrous metals Heat resistant alloys hardened materials

System C-KF


38 www.wnt.com

ADKT / APKT-29 -29 -29 -29 -29

DCX 1230

DPX 1235

DPX 2240

DCX 1230

DPX 1235

ADKT ADKT ADKT APKT APKTPG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no.

ISO r 51 020 ... 51 020 ... 51 020 ... 51 021 ... 51 021 ...mm £ £ £ £ £

1505PDSR 0.8 12.85 51020020 12.85 51020120 12.85 510204201604PDSR 0.8 12.85 51021020 12.85 51021120

Steel ● ● ○ ● ●Stainless steel ○ ○ ● ○ ○Cast iron Non ferrous metals Heat resistant alloys hardened materials

LDHT / LPHT / LDHW / LPHW-29 -29

DPX 1235

DPX 1235

DCX 1230

DPX 1235

DCX 3215

DPX 1235

LDHT LPHT LDHW LDHW LDHW LPHWPG 1B PG 1B PG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no. Article no. Article no.

ISO r 51 044 ... 51 025 ... 51 023 ... 51 023 ... 51 023 ... 51 026 ...mm £ £ £ £ £ £

15T308ER 0.8 11.70 5102350815T308SR 0.8 12.65 51023008 12.17 5102310815T3PDSR 0.8 13.70 51044120200408ER 0.8 20.61 51025108200408SR 0.8 19.08 51026108

Steel ● ● ● ● ○ ●Stainless steel ○ ○ ○ ○ ○Cast iron ● Non ferrous metals Heat resistant alloys hardened materials

ISO Inserts


www.wnt.com 39

SEHT / SEHW / SEKN / SEKW

DPX 1235

DPX 1235

DCX 1230

DPX 1235

SEHT SEHW SEKW SEKWPG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no.

ISO r 51 060 ... 51 061 ... 51 064 ... 51 064 ...mm £ £ £ £

1204AFSN 0.3 17.17 510611201204AFSN 0.2 17.17 510601201204AFSN 2.4 12.65 51064020 12.36 51064120

Steel ● ● ● ●Stainless steel ○ ○ ○ ○Cast iron Non ferrous metals Heat resistant alloys hardened materials

SPKN / SEKN

DPX 1235

DPX 1235

DPX 2240

SPKN SEKN SEKNPG 1B PG 1B PG 1BArticle no. Article no. Article no.

ISO 51 066 ... 51 062 ... 51 062 ...£ £ £1203EDSR 12.27 510661201204AFSN 13.90 51062121 14.47 510624211504AFSN 17.63 510624251504EDSR 18.69 51066125


ISO Inserts


40 www.wnt.com

SPKW / SPMT

DPX 1235

DCX 3215

DPX 1235

DPX 1235

SPKW SPKW SPMT SPMTPG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no.

ISO r 51 067 ... 51 067 ... 51 031 ... 51 032 ...mm £ £ £ £

090308SN 0.8 9.34 51031108120408SN 0.8 12.17 510321081204EDER 0.25 12.27 510675201204EDSR 0.25 12.94 51067120

Steel ● ○ ● ●Stainless steel ○ ○ ○Cast iron ● Non ferrous metals Heat resistant alloys hardened materials

TPKN / TPKR / TPKW -29 -29

DCX 1230

DPX 1235

DCX 1230

DPX 1235

TPKN TPKN TPKR TPKRPG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no.

ISO r 51 068 ... 51 068 ... 51 069 ... 51 069 ...mm £ £ £ £

1603PPSR 9.87 510681201603PPSR 0.8 10.36 510691202204PDSR 15.14 51068025 14.96 510681252204PDSR 0.8 15.82 51069025 15.53 51069125

Steel ● ● ● ●Stainless steel ○ ○ ○ ○Cast iron Non ferrous metals Heat resistant alloys hardened materials

ISO Inserts


www.wnt.com 41

TPKW / TPKN / TPKR

DPX 1235

TPKWPG 1BArticle no.

ISO r 51 070 ...mm £

16T3PPSR 1.1 9.78 510701202204PDSR 1.2 14.96 51070125

Steel ●Stainless steel ○Cast iron Non ferrous metals Heat resistant alloys hardened materials

WPHT / WPMT-29 -29 -31 -29

DCX 1230

DPX 1235

DCX 3215

DCX 1230

WPHT WPHT WPHT WPMTPG 1B PG 1B PG 1B PG 1BArticle no. Article no. Article no. Article no.

ISO r 51 071 ... 51 071 ... 51 072 ... 51 073 ...mm £ £ £ £

0603PDSR 0.8 16.01 51071020 15.43 51071120 14.96 51072520 11.79 51073020

Steel ● ● ○ ●Stainless steel ○ ○ ○Cast iron ● Non ferrous metals Heat resistant alloys hardened materials

ISO Inserts


42 www.wnt.com

Index Material Strength Material numberMaterial

designationMaterial number

Material designation

Material number

Material designation(N/mm² - HB - HRc)

P

1.1 General construction steel < 800 N/mm2 1.0037 St 37-2 1.0570 St 52-3 1.0060 St 60-21.2 Free cutting steel < 800 N/mm2 1.0718 9 SMnPb 28 1.0727 45 S 20 1.0757 46 SPb 21.3 Hardened steel, non alloyed < 800 N/mm2 1.0401 C 15 1.0481 17 Mn 4 1.1141 Ck 151.4 Alloyed hardened steel < 1000 N/mm2 1.7331 16 MnCr 5 1.7015 13 Cr 3 1.5919 15 CrNi 61.5 Tempering steel, unalloyed < 850 N/mm2 1.0503 C 45 1.1191 Ck 45 1.0535 C 551.6 Tempering steel, unalloyed < 1000 N/mm2 1.0601 C 60 1.1221 Ck 60 1.0540 C 501.7 Tempering steel, alloyed < 800 N/mm2 1.5131 50 MnSi 4 1.7030 28 Cr 4 1.7225 42 CrMo 41.8 Tempering steel, alloyed < 1300 N/mm2 1.5755 31 NiCr 14 1.7033 34 Cr 4 1.3565 48 CrMo 41.9 Steel castings < 850 N/mm2 0.9650 G-X 260 Cr 27 1.6750 GS-20 NiCrMo 3 7 1.6582 GS-34 CrNiMo 61.10 Nitriding steel < 1000 N/mm2 1.8504 34 CrAl 6 1.8507 34 AlMo 5 1.8509 41 CrAlMo 71.11 Nitriding steel < 1200 N/mm2 1.8515 31 CrMo 12 1.8523 39 CrMoV 19 3 1.8550 34 CrAlNi 71.12 Roller bearing steel < 1200 N/mm2 1.3505 100 Cr6 (W3) 1.3543 X 192 CrMo 17 1.3520 100 CrMn 61.13 Spring steel < 1200 N/mm2 1.5026 55 Si 7 1.7176 55 Cr 3 1.7701 51 CrMoV 41.14 High-speed steel < 1300 N/mm2 1.3344 S 6-5-3 1.3255 S 18-1-2-5 1.3294 PMHS6-5-3-8; ASP301.15 Cold working tool steel < 1300 N/mm2 1.2312 40 CrMnMoS 8 6 1.2379 X 155 CrVMo 12 1 1.2316 X36 CrMo 161.16 Hot working tool steel < 1300 N/mm2 1.2343 X 38 CrMoV 5 1 1.2567 X 30 WCrV 5 3 1.2744 57 NiCrMov 7 7

M

2.1 Cast steel and sulphured stainless steel < 850 N/mm2 1.3941 G-X 4 CrNi 18 13 1.4027 G-X 20 Cr 14 1.4107 G-X 8 CrNi 122.2 Stainless steel, ferritic < 750 N/mm2 1.4510 X 3 CrTi 17 1.4528 X 105 CrCoMo 18 2 1.4016 X 6 Cr 172.3 Stainless steel, martensitic < 900 N/mm2 1.4034 X 46 Cr 13 1.4116 X 50 CrMoV 15 1.4106 X 2 CrMoSiS 18 2 12.4 Stainless steel, ferritic / martensitic 15% Si < 400 N/mm2 G-AlSi17Cu4 G-AlSi25CuNiMg G-AlSi21CuNiMg4.6 Copper (non alloyed, low alloyed) < 350 N/mm2 2.0060 E-Cu57 2.0090 SF-Cu 2.1522 CuSl2Mn4.7 Copper wrought alloys < 700 N/mm2 2.0205 CuZn0,5 2.1160 CuPb1P 2.1366 CuMn54.8 Special copper alloys < 200 HB 2.0916 CuAl5 2.1525 CuSi3Mn Ampco 8-164.9 Special copper alloys < 300 HB 2.0978 CuAl11Ni6Fe5 Ampco18-264.10 Special copper alloys > 300 HB 2.1247 CuBe2F125 Ampco M-44.11 Short-chipping brass, bronze, red bronze < 600 N/mm2 2.0331 CuZn36Pb1,5 2.0380 CuZn39Pb2 (Ms58) 2.0410 CuZn44Pb24.12 Long-chipping brass < 600 N/mm2 2.0335 CuZn36 (Ms63) 2.1293 CuCrZr 2.1080 CuSn6Zn64.13 Thermoplastics PP Hostalen PVC Makrolon, Novodur4.14 Duroplastics Ferrozell, Bakelit Pertinax Resopal4.15 Fibre-reinforced plastics GFK* CFK** AFK***4.16 Magnesium and magnesium alloys < 850 N/mm2 3.5200 MgMn2 3.5612 MgAl6Zn1 3.5812 MgAl8Zn14.17 Graphite R8500X R8650 Technograph 154.18 Tungsten and tungsten alloys W-NiFe (Densimet W) W-Cu80/20 W93NiFe (DENAL)4.19 Molybdenum and molybdenum alloys Mo, Mo-50Re TZC, TZM MHC, ODS

S

5.1 Pure nickel 1.3911 RNi24 1.3927 RNi8 1.3926 RNi125.2 Nickel alloys 1.3912 Ni36 (Invar) 1.3924 Ni54 1.3921 Ni495.3 Nickel alloys < 850 N/mm2 2.4360 NiCu30Fe 2.4375 NiCu30Al 2.4858 NiCr21Mo5.4 Nickel-chromium alloys 2.4886 SG-NiMo16Cr16W 2.4610 NiMo16Cr16Ti Hastelloy C-2765.5 Nickel alloys < 1300 N/mm2 2.4632 NiCr20Co18Ti 2.4631 NiCr20TiAl 2.4640 NiCr15Fe5.6 Cobalt Chrome Alloys < 1300 N/mm2 2.4711 CoCr20Ni15Mo 2.4964 CoCr20W15Ni 2.4989 CoCr20NiW5.7 Heat resistant alloys < 1300 N/mm2 1.4718 X 45 CrSi 9 3 1.4747 X 80 CrNiSi 20 1.4980 X5 NiCrTi 26155.8 Nickel-cobalt-chromium alloys < 1400 N/mm2 2.4806 SG-NiCr20Nb, Inconel 82 2.4851 NiCr23Fe, Inconel 601 2.4667 SG-NiCr19NbMoTi5.9 Pure titanium < 900 N/mm2 3.7025 Ti99,8 3.7034 Ti99,7 3.7064 Ti99,55.10 Titanium alloys < 700 N/mm2 3.7114 TiAl5Sn2 3.7174 TiAl6V6Sn2 3.7124 TiCu25.11 Titanium alloys < 1200 N/mm2 3.7164 TiAl5V4 3.7144 TiAl6Sn2Zr4Mo2 3.7154 TiAl6Zr5

H

6.1

Tempered steel

< 45 HRc6.2 46-55HRc6.3 56-60 HRc6.4 61-65 HRc6.5 65-70 HRc

* Glass fibre reinforced **Carbon fibre reinforced ***Aramid fibre reinforced

Material examples referring to the WNT cutting data tables


www.wnt.com 43

Cutting Material hard (vc↑) → tough (vc↓) Cutting Material hard (vc↑) → tough (vc↓) Cutting Material hard (vc↑) → tough (vc↓)

Index

DCX 1230 DPX 1235 DPX 2225 DCX 2235 DPX 2240 DCX 3215 DPX 3220

1.1 280 170 240 140 270 160 240 140 220 130 350 210 300 1801.2 230 140 190 110 220 130 190 110 170 100 300 180 250 1501.3 280 170 240 140 270 160 240 140 220 130 350 210 300 1801.4 250 150 220 130 240 140 210 130 200 1201.5 250 150 210 130 230 140 210 130 190 110 320 190 270 1601.6 250 150 210 130 230 140 210 130 190 110 320 190 270 1601.7 250 150 220 130 240 140 210 130 200 1201.8 190 110 160 100 180 100 150 90 140 801.9 230 140 200 120 220 130 200 120 180 100 300 180 260 160

1.10 250 150 220 130 240 140 210 130 200 1201.11 140 90 120 70 140 80 100 60 100 601.12 250 150 220 130 240 140 210 130 200 1201.13 250 150 210 130 230 140 210 130 190 110 320 190 270 1601.14 100 60 90 50 170 100 120 70 90 501.15 130 80 110 70 180 110 150 90 120 701.16 130 80 110 70 180 110 150 90 120 702.1 90 60 80 50 170 100 110 70 80 502.2 130 80 110 70 180 110 150 90 120 702.3 90 60 80 50 170 100 110 70 80 502.4 130 80 110 70 180 110 150 90 120 702.5 190 110 280 160 250 140 190 1102.6 190 110 280 160 260 150 210 1202.7 190 110 280 160 260 150 210 1203.1 360 160 320 1603.2 360 160 320 1603.3 230 140 210 1303.4 160 100 140 803.5 250 150 200 1203.6 250 150 200 1203.7 210 130 170 1003.8 210 130 170 1004.14.24.34.44.54.64.74.84.9

4.104.114.124.134.144.154.164.174.184.195.15.25.35.45.55.65.75.85.9

5.105.116.16.26.36.46.5

Cutting data appoximate values

The cutting data depends extremely on the external conditions, e.g. stability of the tool and tool clamping, material and machine type. The indicated values are possible cutting data which have to be increased or reduced according to the application conditions.


2TOTAL TOOLING = QUALITY x SERVICE

12/2

014

- 99

022

0014

2

www.wnt.com

wnt new milling gradeskt-nw-02-14-00142_en... · 2014. 12. 11. · 4 the new grades, in combination...

Documents