wood-chippers models: hercules,galaxi, … englisch.pdf · wood-chippers models: hercules,galaxi,...
TRANSCRIPT
"GL&Dsrl unipersonale"
Via Ceresone, 9 35035 Mestrino(PD) ITALY C.F. GBBLCU61A01F161 C/P.IVA 04724030285
TEL/FAX 0499003475 e-mail:[email protected]
WOOD-CHIPPERS
Models: HERCULES,GALAXI, OMEGA M4
PRODUCTS CATALOGUE
Sede legale: Via Ceresone, 9 35035 Mestrino( PD) Italy
Tel/Fax 049 9003475 E-mail [email protected] Cod. fisc. e Partita IVA 04724030285
MODELS WOOD-CHIPPERS HÉRCULES:
- HÉRCULES 125UNIVERSAL
- HÉRCULES C150SE
- HÉRCULES CT150SE
- HÉRCULES M160SE
- HÉRCULES MT160SE
WOODCHIPPER HÉRCULES C125 UNIVERSAL
1 FEED ROLLER
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 120 cm - Plugged through P.t.o shaft
- Hèrcules C125 universal is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- La Hèrcules C125 universal has a force-feeding of product and it is guarantee by a toothed roll with controlled hydraulic controllo idraulico and with instant reverse.
- this version works on 3-point hitch universal of 1° and 2 ° Cat.
- the control of the effort is manual The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 590 X 28
mm ( A X B )
220x150
Power needed (CV)
da 25 a 70
Quantity knives
2
di produz. Dell’azienda
KG
460
Production (m³/h)
Min 10 Max 16
Ø(mm) MAX
to chip
125
Dimensions
(mm)
A - B - C 126 - 135 -165
WOODCHIPPER HÉRCULES C150SE
1 FEED ROLLER
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 150 cm - Plugged through P.t.o shaft
- Hèrcules C150SE is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- La Hèrcules C150SE has a force-feeding of product and it is guarantee by a toothed roll with controlled hydraulic controllo idraulico and with instant reverse.
- this version works on 3-point hitch universal of 1° and 2 ° Cat.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 590 X 28
mm ( A X B )
220x150
Power needed (CV)
da 25 a 70
Quantity knives
2
di produz. Dell’azienda
KG
500
Production (m³/h)
Min 10 Max 16
Ø(mm) MAX
to chip
150
Dimensions
(mm)
A - B - C 126 - 135 -165
WOODCHIPPER HÉRCULES M160SE
1 FEED ROLLER
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 160 cm - Plugged through P.t.o shaft
- Hèrcules M160SE is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Hèrcules M160SE has a force-feeding of product and it is guarantee by a toothed roll with controlled hydraulic controllo idraulico and with instant reverse.
- this version works on 3-point hitch universal of 1° and 2 ° Cat. it has a side frame for to have the side loading, and it is complete with connection for towing trailer agriculture.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 610 X 30
mm ( A X B )
220x160
Power needed (CV)
da 35 a 110
Quantity knives
2
di produz. Dell’azienda
KG
527
Production (m³/h)
Min 12 Max 25
Ø(mm) MAX
to chip
160
Dimensions
(mm)
A - B - C 126 - 139 -170
WOODCHIPPER HÉRCULES MT160SE
1 FEED ROLLER
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 160 cm - Plugged through P.t.o shaft
- Hèrcules MT160SE is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- La Hèrcules MT160SE has a force-feeding of product and it is guarantee by a toothed roll with controlled hydraulic controllo idraulico and with instant reverse.
- this version is of the type towed with trolley “Certificate for road traffic” and it is towed by agricultural tractor. it has a side frame for to have the side loading, and it is complete with connection for towing trailer agriculture.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power. The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 590 X 28
mm ( A X B )
220x160
Power needed (CV)
da 35 a 110
Quantity knives
2
di produz. Dell’azienda
KG
560
Production (m³/h)
Min 12 Max 25
Ø(mm) MAX
to chip
160
Dimensions
(mm)
A - B - C 148 - 258 -170
MODELS WOOD-CHIPPERS GALAXI:
- GALAXI C155DT
- GALAXI CT155DT
- GALAXI CTP155DT
- GALAXI M165DT
- GALAXI MT165DT
- GALAXI M225DT
- GALAXI MT225DT
- GALAXI MOTOR CDM150DT (MOTOR)
- GALAXI MOTOR CDB150DT (MOTOR)
WOODCHIPPER GALAXI C155DT
2 FEED ROLLER
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 155 cm - Plugged through P.t.o shaft
- Galaxi C155DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi C155DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version works on 3-point hitch universal of 1° and 2 ° Cat.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 610 X 30
mm ( A X B )
220x160
Power needed (CV)
da 25 a 85
Quantity knives
2
di produz. Dell’azienda
KG
545
Production (m³/h)
Min 8 Max 21
Ø(mm) MAX
to chip
155
Dimensions
(mm)
A - B - C 126 - 140 -165
WOODCHIPPER GALAXI C155DT
2 FEED ROLLER
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 155 cm - Plugged through P.t.o shaft
- Galaxi C155DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi C155DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version is of the type towed with trolley “Certificate for road traffic” and it is towed by agricultural tractor.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 610 X 30
mm ( A X B )
220x160
Power needed (CV)
da 25 a 85
Quantity knives
2
di produz. Dell’azienda
KG
545
Production (m³/h)
Min 8 Max 21
Ø(mm) MAX
to chip
155
Dimensions
(mm)
A - B - C 148 - 255 -171
WOODCHIPPER GALAXI CTP155DT
2 FEED ROLLER
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 155 cm - Plugged through P.t.o shaft
- Galaxi C155DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi C155DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version of the type half-brought on the universal three-point of 1 ° and 2 ° Cat. With pneumatic wheels of support, for to facilitate small agricultural tractors.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 610 X 30
mm ( A X B )
220x160
Power needed (CV)
da 25 a 85
Quantity knives
2
di produz. Dell’azienda
KG
545
Production (m³/h)
Min 8 Max 21
Ø(mm) MAX
to chip
125
Dimensions
(mm)
A - B - C 148 - 255 -171
WOODCHIPPER GALAXI M165DT
2 FEED ROLLER
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 165 cm - Plugged through P.t.o shaft
- Galaxi M165DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi M165DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version works on 3-point hitch universal of 1° and 2 ° Cat. it has a side frame for to have the side loading, and it is complete with connection for towing trailer agriculture.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 610 X 30
mm
230x170
Power needed (CV)
da 35 a 110
Quantity knives
2
di produz. Dell’azienda
KG
535
Production (m³/h)
Min 12 Max 25
Ø(mm) MAX
to chip
165
Dimensions
(mm)
A - B - C 126 - 149 -165
WOODCHIPPER GALAXI MT165DT
2 FEED ROLLER
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 165 cm - Plugged through P.t.o shaft
- Galaxi MT165DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi MT165DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version is of the type towed with trolley “Certificate for road traffic” and it is towed by agricultural tractor. it has a side frame for to have the side loading, and it is complete with connection for towing trailer agriculture.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 610 X 30
mm ( A X B )
230x170
Power needed (CV)
da 35 a 110
Quantity knives
2
di produz. Dell’azienda
KG
580
Production (m³/h)
Min 12 Max 25
Ø(mm) MAX
to chip
160
Dimensions
(mm)
A - B - C 146– 260-165
WOODCHIPPER GALAXI M225DT
2 FEED ROLLER
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 225 cm - Plugged through P.t.o shaft
- Galaxi M225DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi M225DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version works on 3-point hitch universal of 1° and 2 ° Cat. it has a side frame for to have the side loading, and it is complete with connection for towing trailer agriculture.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 820 X 40
mm ( A X B )
290x250
Power needed (CV)
da 75 a 110
Quantity knives
2
di produz. Dell’azienda
KG
890
Production (m³/h)
Min 12 Max 38
Ø(mm) MAX
to chip
225
Dimensions
(mm)
A - B - C 245 – 149 -288
WOODCHIPPER GALAXI CDM150DT
2 FEED ROLLERS
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 155 cm - Plugged through P.t.o shaft
- Galaxi CDM150DT is designed to work with dry and green woods for satisfy also the extreme demands of operators. The machine has a DIESEL engine LOMBARDINI fox 4 cylinder.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi CDM150DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version is of the type towed with trolley “Certificate for road traffic” and it is towed by agricultural tractor.
- The hydraulic system is with temperature controlled.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 590 X 28
mm
220x150
Power 38 CV 4 Cyl FOX
Liquid Cooler
Quantity knives
2
di produz. Dell’azienda
KG
460
Production (m³/h)
Min 10 Max 16
Ø(mm) MAX
to chip
125
Dimensions
(mm)
A - B - C 126 - 135 -165
WOODCHIPPER GALAXI CDB150DT
2 FEED ROLLERS
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 155 cm - Plugged through P.t.o shaft
- Galaxi CDB150DT is designed to work with dry and green woods for satisfy also the extreme demands of operators. The machine has a PETROL engine KOOLER.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi CDB150DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version is of the type towed with trolley “Certificate for road traffic” and it is towed by agricultural tractor.
- The hydraulic system is with temperature controlled.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 590 X 28
mm ( A X B )
220x150
POWER 38 CV
Kooler 2 Cylinder Air Cooler
(made in USA)
Quantity knives
2
di produz. Dell’azienda
KG
460
Production (m³/h)
Min 10 Max 16
Ø(mm) MAX
to chip
125
Dimensions
(mm)
A - B - C 126 - 135 -165
WOODCHIPPER GALAXI MT225DT
2 FEED ROLLERS
CHIPPING TOOLS DISCS
Multifunctional Disc PATENT VR2013A000103
Multifunctional Chipping Disc with 6 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Multifunctional Disc
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 225 cm - Plugged through P.t.o shaft
- Galaxi MT225DT is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi MT225DT has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version is of the type towed with trolley “Certificate for road traffic” and it is towed by agricultural tractor. it has a side frame for to have the side loading, and it is complete with connection for towing trailer agriculture.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
mm
Ø 820 X 40
mm ( A X B )
290x250
Power needed (CV)
da 75 a 160
Quantity knives
2
di produz. Dell’azienda
KG
950
Production (m³/h)
Min 12 Max 25
Ø(mm) MAX
to chip
225
Dimensions
(mm)
A - B - C 360 - 149 -288
CHIPPER MULTIFUNCTION OMEGA M4: - OMEGA M4
CHIPPER MULTIFUNCTION FUSION: - FUSION C155 DS / M175 DS MACHINES FOR MAKING PELLETS
- P200 PTO/MOTOR - P400 PTO/MOTOR
-------------------------------------------------------------------------------------------------------------------
MODELS HYDRAULIC CHIPPERS
- GALAXI HY100 - GALAXI HY120
-------------------------------------------------------------------------------------------------------------------
MODELS TITANO CHIPPERS
- MOTOR - PTO
CALIBRATE CHIPPER OMEGA M4 IS DESIGNED FOR THE PRODUCTION OF CHIPS SUITABLE FOR:
Mode Green
1° DISPOSAL PRUNINGS green and wet
Mode Chips 2° PRODUCE STANDARD CHIP
from 5/6 to 15/25 mm for boilers with cochlea over Ø 80 mm
Mode Calibrated
3° CHIPS FOR BURNINGS CALIBRATED of 6x6, 8x8, 10x10
from: boilers with feeders from 40/60 mm, pomace boilers, pellet
boilers and thermal chimneys.
Modalità Transformation
4° PRODUCE MICRO CHIPS suitable for machines for the production
of PELLET.
Woodchipper grader - Ø max to chip 150 mm - Actuated P.t.o. Agricola
From experience of chippers Hércules and Galaxy born the Super Calibrate Chipper OMEGA M4
- The chipper OMEGA M4 is designed for to work green and dry products, with extreme precision in the transformation of wood products in chip for boilers and micro-chips for produce pellets.
- The need to provide boilers with small power supplies, a calibrated chipped and perfect in the form, makes of OMEGA M4 the chipper that satisfies every user.
- The project is the result that realizes the dream of thousands of users.
- The chipper /sizer OMEGA M4 is made from a fantastic project, and has its secret is in the group of chipping / calibration; is equipped with a revolutionary system of ejection, which guarantees perfect operation in all conditions with every type of product, even to what you're thinking !!!
TECHNICAL DETAILS
TYPE
Multi-Air “Brevettato”
mm
( A X B )
230x170
Power MIN request (CV)
From 45 CV
Quantity Knives
2
KG
580
Production (m³/h)
Min 8 Max 21
Ø(mm) MAX
chipping
155
Tools Calibration
N° 36
THE MULTIFUNCTIONAL WOODCHIPPER FUSION IS REALIZED WITH INNOVATIVE SYSTEM OF FEED-CHAIN
- Woodchipper FUSION is designed for chipping green and dry products and thanks to the Feeding special with chain allow to satisfy also the EXTREME DEMANDS OF THE MAINTENANCE.
- Woodchipper FUSION have a “NEW SYSTEM OF KNIVES” with 4 blades with a strong ventilation studing for disposal also of green prodcuts. The particular “control lever” allow to have an easy and quickly control on the feed.
MODELS TECHNICAL FEATURES
C155DS
Ø670 / 32mm
mm ( A X B )
230x170
Power MIN request (CV)
da 25
Quantity Knives
4
KG
535
Production (m³/h)
14 - 24
Ø(mm) MAX
Chipping
155
M175DS
Ø670 / 32mm
mm ( A X B )
230x170
Power MIN request (CV)
da 45
Quantity Knives
4
KG
580
Production
(m³/h)
14 - 30
Ø(mm) MAX
Chipping
170
CIPPATRICE GALAXI HY 100-120
2 FEED ROLLER
SISTEMA IDRAULICO INNOVATIVO
Disco Multifunzione
Multifunctional Chipping Disc with 2 adjustable knives to produce shreds from 1 mm to 11 mm, indicated for combustion or disposal.
Chipping Tools Discs easy to extract and adjust from 1 to 11 mm width
Woodchipper - Ø max to chip 120 cm - Plugged through P.t.o shaft
- Galaxi HY100/120 is designed to work with dry and green woods for satisfy also the extreme demands of operators.
- It produces ideal cuts for combustion, which size can vary as per how the user wishes to regulate the knives.
- Galaxi HY100/120 has a force-feeding of product guarantee by 2 rolls with hydraulic action.
- this version works on 3-point hitch universal of 1° and 2 ° Cat.
- the control of the effort is AUTOMATIC (NO-STRESS CONTROL) and it is of the lastest generation; and it is able to adapt to every power.The safety bar allows instantaneous stop of the feed roller and commands the reversal of motion of the feed rolls.
- The hydraulic system is “independent”, so doesn’t need another pipes connected with the tractor.
- is possible add a special hydraulic kit “VOLUMETRIC”, which controls perfectly the alimentation speed and allows the chipper to produce wood cuts of different sizes, included refined and small. - is possible add a kit of SELECTORS DIMENSIONS that allow of make a more uniform chip.
TECHNICAL DETAILS
WIEDEMAN
HY 100
mm
POWER REQUIRED l/min IDR
Quantity knives
KG
Production (m³/h)
Ø(mm) MAX Cipp.
Dimensions (mm)
Ø 600 X 30
40/50
160 BAR
2/6
395
Min 6 Max 12
100
A - B - C 126 - 120 -165
HY 120
Ø 600 X 30
70/70 160 BAR
2/6
398
Min 8
Max 16
120
A - B - C 126 - 120 -165
MACHINE PELLET P200 PTO / MOTOR
DRAWING WITH 2 WHEELS OF COMPRESSION
- VERS. PTO 540 15/30 CV Prod.120/190 - VERS. WITH ENGINE LOMBARDINI DIESEL 2 CYLINDERS 18 CV Prod.120/190 - feed hopper - Cart with wheel for movement - 2 Toothed wheels for Compression - Special calibrator device ø280 for hard materials
MACHINE PELLET P400 PTO / MOTOR
DRAWING WITH 4 WHEELS OF COMPRESSION
- VERS. PTO 540 25/50 CV Prod.280/390 - VERS. WITH ENGINE LOMBARDINI DIESEL 4 CYLINDERS 36 CV Prod.280/390 - feed hopper - Cart with wheel for movement - 2 Toothed wheels for Compression - Special calibrator device ø280 for hard materials.
WOOD-CHIPPER TITANO
- VERSION PTO 15/20 CV - VERSION Petrol HONDA 11,7 CV Maximum diameter max 80 mm
N° knives 2 adjustable + 2 counterknives
discharge pipe adjustable
wheels for movement
Safety protection “CE”
Extra blade for Sifting Grid selector NEW Control feed manual