Wood Vinegar Use charcoal product for cooking. Charcoal made from wood vinegar produces cleaner, safer smoke.

For the following applications, dilute raw wood vinegar with water in the indicated ratio.

Kill pests by applying a 1:20 ratio to the soil

Kill weeds by applying a 1:50 ratio to the soil

Prevent stems and roots from rotting by applying a 1:100 ratio

Prevent pests and mold while accelerating plant growth by applying a 1:200 ratio to the soil

Prevent plant lice by applying a 1:400 ratio to the plant

Enhance fruit growth by applying a 1:500 ratio to forming fruit

The production of wood vinegar is cost-effective, takes only one day and offers a versatile range of beneficial applications that are gentle on the environment:

Refer to the Wood Vinegar Video

for more Information.

Benefits of Wood Vinegar

The Office of Her Royal Highness Princess Maha Chakri Sirindhorn’s Projects

Chitralada Villa, Dusit Palace

Bangkok 10303, Thailand Tel: (66-2) 2826511; (66-2) 2813921

Fax: (66-22) 2813923

14 Simple Steps to Making Wood Vinegar in 3 Months

Step 5 (Day 1)

Cut a notch 30-50cm away from the angled end of the pipe. This notch will allow wood vinegar to drip out later on in the process.

Step 6 (Day 2)

To produce charcoal and

wood vinegar:

Load three short logs in the kiln

horizontally to promote air flow.

Stack logs from smallest to

largest and perpendicular to the

3 short logs as shown in the

picture to the left. This allows

all logs to fully burn.

Step 7 (Day 2)

Seal the kiln lid in place with a layer of clay about 5 cm thick. Proceed while the clay is wet.

Step 8

(Day 2)

To build a fireplace, put 4 bricks

around the 20 cm square hole in

the lid. Seal with clay.

Step 9

(Day 2)

Start and maintain a fire

slightly inside the brick fireplace.

Wait approximately 2 hours un-

til a strong white smoke

emerges from the asbestos pipe.

Step 10

(Day 2)

Attach the angled end of the bamboo

pipe to the asbestos pipe at point C.

Seal with clay, making sure the

notch is facing downward.

Step 11

(Day 2)

Wrap the length of the bamboo pipe

with cool, damp cloths to aid in the

condensation of raw wood vinegar.

Hang a collection bottle at the notch

to capture the product .

Step 12

(Day 2)

Maintain the fire and dampness of

the cloths. The raw wood vinegar is

finished producing when the droplets

turn black, indicating that tar has

formed.

Step 13

(Day 2)

To make charcoal:

Remove the collection bottle and

the bamboo pipe.

Place a small clay pot on the

opening of the asbestos pipe and seal

any remaining openings with clay.

Stack two bricks in front of the

entrance and seal with clay.

Wait 8 hours for charcoal to form.

Step 14

(Day 2-92)

To purify raw wood vinegar:

Let the wood vinegar sit for 90 days

and settle into 3 layers.

Extract the middle layer of wood

vinegar with a syringe.

Dilute the wood vinegar depending

on its purpose.

Wood vinegar is natural, gentle on the environment, and cost-effective. The materials needed to produce wood vinegar, such as bamboo, clay, and wood, are readily available in even the most remote areas of Asia. Making wood vinegar is an exciting way to teach students about practical science topics. This knowledge can help them prosper in their future careers.

“With wood vinegar, we can enhance our crops and use the knowledge in a future career!” -Aim-usa B.

Step 1 (Day 1)

To build the kiln:

Cut the lid off of one end of a 200 L metal tank.

Cut a 20 cm x 20 cm square hole at the bottom of the lid as shown in the picture to the left.

Step 2 (Day 1)

Cut a 10 cm diameter circular hole on the other side of the tank at point A in Diagram 1.

Step 3 (Day 1)

Attach an asbestos joint to the 10

cm hole as shown in A of diagram.

Then, attach an asbestos pipe to

the joint as shown in B.

Step 4 (Day 1)

Make a bamboo pipe by hollowing out a 4 m bamboo stalk with a metal pole.

Cut one end of the pipe at an angle.

Diagram 1

Why Wood Vinegar?