work, power and energy
TRANSCRIPT
![Page 1: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/1.jpg)
IIT JEE -PHYSICS
Work, Power, and Energy
![Page 2: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/2.jpg)
SECTION – I
OBJECTIVE QUESTIONSOnly one option is correct
![Page 3: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/3.jpg)
01Two masses of 1 g and 4 g are moving with equal kinetic energies. The ratio of
the magnitude of their momenta is :
a. 4 : 1
b. √2: 1
c. 1 : 2
d. 1 : 16
Problem1980
![Page 4: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/4.jpg)
02A body is moved along a straight line by a machine delivering constant power. The
distance moved by the body in time t is proportional to :
a. t1/2
b. t3/4
c. t3/2
d. t2
Problem1984
![Page 5: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/5.jpg)
03A uniform chain of length L and mass M is lying on a smooth table and one-third
of its length is hanging vertically down over the edge of the table. If g is
acceleration due to gravity, the work required to pull the hanging part on the
table is :
a. MgL
b. MgL/3
c. MgL/9
d. MgL/18
Problem1985
![Page 6: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/6.jpg)
04A particle of mass m is moving in a circular path of constant radius r such that its
centripetal acceleration ac is varying with time t as ac = k2 rt2, where k is a
constant the power delivered to the particle by the force acting on it is:
a. 2πmk2r2
b. mk2r2t
c. (mk4r2t5)/3
d. zero
Problem1994
![Page 7: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/7.jpg)
05A stone tied to a sting or length L is whirled in a vertical circle with the other end
of the string at the center. At a certain instant of time, the stone is at its lower
position, and has a speed u. the magnitude of the change in its velocity as it
reaches a position where the string is horizontal is :
Problem1998
![Page 8: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/8.jpg)
06A force (where K is a positive constant) acts on a particle moving in
the x-y plane. Starting form the origin, The particle is taken along the positive x-
axis to the point (a,0) and then parallel to the y-axis to the point (a,a). The total
work done by the force F on the particle is :
a. -2 Ka2
b. 2 Ka2
c. - Ka2
d. Ka2
Problem1998
ˆ ˆ( )F yi xj
![Page 9: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/9.jpg)
07A spring of force- constant K is cut into two pieces such that one piece is double
the length of the other. Then the long piece will have a force-constant of :
a. (2/3)k
b. (3/2)k
c. 3 k
d. 6 k
Problem1999
![Page 10: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/10.jpg)
08A wind-powered generator converts wind energy into electric energy. Assume
that the generator converts a fixed fraction of the wind energy intercepted by its
blades into electrical energy. For wind speed v, the electrical power output will be
proportional to :
a. v
b. v2
c. v3
d. v4
Problem2001
![Page 11: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/11.jpg)
09A particle, which is constrained to move along x-axis, is subjected to a force in the
same direction which varies with the distance x of the particle from the origin as
F(x) = - kx + ax3. Here, k and a are positive constant. For x 0, the functional form of
the potential energy U(x) of the particle is :
Problem2002
![Page 12: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/12.jpg)
10An ideal spring with spring-constant k is hung from the ceiling and a block of mass
M is attached to its lower end. The mass is released with the spring initially
unstretched. Then the maximum extension in the spring is:
Problem2002
![Page 13: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/13.jpg)
11A simple pendulum is oscillating without damping. When the displacement of the
bob is less than maximum, its acceleration vector a is correctly shown in :
Problem2002
![Page 14: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/14.jpg)
12If W1, W2 and W3 represent the work done in moving a particle from A to B along
three different paths 1, 2 and 3 respectively (as shown) in the gravitational field of
a point mass m. find the correct relation between W1, W2 and W3 :
W1 > W2 > W3
W1 = W2 = W3
W1 < W2 < W3
W2 > W1 > W3
Problem2003
![Page 15: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/15.jpg)
13A particle is placed at the origin and a force F = kx is acting on it (where k is a
positive constant). If U (0) = 0, the graph of U (x) versus x will be (where U is the
potential energy function) :
Problem2004
![Page 16: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/16.jpg)
SECTION – II
OBJECTIVE QUESTIONSMore than one options are correct
![Page 17: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/17.jpg)
01A particle is acted upon by a force of constant magnitude which is always
perpendicular to the velocity of the particle. The motion of the particle takes
place in a plane. It follows that:
a. Its velocity is constant
b. Its acceleration is constant
c. Its acceleration is constant
d. It moves in a circular path
Problem1987
![Page 18: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/18.jpg)
SECTION – III
SUBJECTIVE QUESTIONS
![Page 19: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/19.jpg)
01In the figures (a) and (b) AC, DG and GF are fixed inclined planes, BC = EF = x and
AB = DE = y. A small block of mass M is released from the point A. Its slides down
AC and reaches C with a speed Vc. The same block is released from rest from the
point D. Its slides down DGF and reaches the point F with speed VF. The
coefficients
Of kinetic frictions between block and both the surfaces AC and DGF are .
Calculate VC and VF.
Problem1980
![Page 20: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/20.jpg)
02A body of mass 2 kg is being dragged with a uniform velocity of 2 m/s on a rough
horizontal plane. The coefficient of friction between the body and the surface is
0.20, J = 4.2 J/cal and g =9.8 m/s2. Calculate the amount of heat generated in 5
sec.
Problem1980
![Page 21: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/21.jpg)
03A led bullet just melts when stopped by an obstacle Assuming that 25 per cent of
the heat is absorbed by the obstacle, find the velocity of the bullet if its initial
temperature is 270C.
(Melting point of lead = 3270 C, specific heat of lead = 0.03 cal/g-C0, latent heat of
fusion of lead = 6 cal/g-0C, J = 4.2 Joule/calorie).
Problem1981
![Page 22: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/22.jpg)
04Two blocks A and B are connected to each other by a string and a spring; the
string passes over a frictionless pulley as shown in figure. Block B slides over the
horizontal top surface of a stationary block C and the block A slides along the
vertical side of C, both with the same uniform speed. The coefficient of friction
between the surfaces of blocks is 0.2. Force constant of the spring is 1960 N/m. If
mass of block A is 2 kg. Calculate the mass of block B and the energy stored in the
spring.
Problem1993
![Page 23: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/23.jpg)
05A 0.5 kg block slides from the point A (see fig.) on a horizontal track with an initial
speed of 3 m/s towards a weightless horizontal spring of length 1 m and force
constant 2 N/m. the part AB of the track is frictionless and the part BC has the
coefficients of static and kinetic friction as 0.22 and 0.2 respectively. If the
distances AB and BD are 2 m and 2.14 m respectively, find the total distance
through which the block moves before it comes to rest completely.(Take g =10
m/s2).
Problem1983
![Page 24: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/24.jpg)
06A string, with one end fixed on a rigid wall, passing over a fixed frictionless pulley
at a distance of 2 m from the wall, has a point mass M = 2 kg attached to it at a
distance of 1 m from the wall. A mass m = 0.5 kg attached at the free end is held
at rest so that the string is horizontal between the wall and the pulley and vertical
beyond the pulley. What will be the speed with which the mass M will hit the wall
when the mass m is released?
Problem1985
![Page 25: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/25.jpg)
07A bullet of mass M is fired with a velocity 50 m/s at an angle θ with the
horizontal. At the highest point of its trajectory, it collides head-on with a bob of
mass 3 M suspended by a massless string of length 10/3 metres and gets
embedded in the bob. After the collision the string move through an angle of
1200. Find :
a. The angle θ,
b. The vertical and horizontal co-ordinates of the initial position of the bob
with respect to the point of firing of the bullet. (Take g = 10 m/s2)
Problem1988
![Page 26: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/26.jpg)
08A particle is suspended vertically from a point O by an inextensible massless
string of length L. A vertical line AB is at a distance L/8 from O as shown in figure.
The object is given a horizontal velocity u. At some point, its motion ceases to be
circular and eventually the object passes through the line AB. At the instant of
crossing AB< its velocity is horizontal. Find u.
Problem1999
u
![Page 27: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/27.jpg)
09A spherical ball of mass m is kept at the highest point in the space between two fixed, concentric spheres A and B (see figure). The smaller sphere A has a radius R and the space between the two spheres has a width d. The ball has a diameter very slightly less then d. All surfaces are frictionless. The ball is given a gentle push(towards the right in the figure). The angle made by the radius vector of the ball with the upward vertical is denoted by θ.Express the total normal reaction force exerted by the spheres on the ball as a function of a angle θ. Let NA and NB denote the magnitudes of the normal reaction forces on the ball exerted by the spheres A and B, respectively. Sketch the variations of NA and NB as function of cos θ in the range 0≤θ≤π by drawing two separate graphs in your answer book, taking cosθ on the horizontal axis.
Problem2004
![Page 28: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/28.jpg)
10Two identical ladders are arranged as shown in the figure. Mass of each ladder is
M and length L. The system is in equilibrium. Find direction and magnitude of
frictional force acting at A or B.
Problem2005
![Page 29: Work, power and energy](https://reader035.vdocument.in/reader035/viewer/2022062300/554a24d5b4c9051b578b480b/html5/thumbnails/29.jpg)
11A circular disc with a groove along its diameter is placed horizontally. A block of
mass 1 kg is placed as shown. The coefficient of friction between the block and all
surfaces of groove in contact is μ=2/5. The disc has an acceleration of 25 m/s2.
Find the acceleration of the block with respect of disc.
Problem2006